Rev V.2.0 Update 1

01 de octubre de 2019

IMAGE INSTRUCTIONS V.2.0 Updatable BLASMAKERS-EA5GVK.ES

(collaboration of the friend EA7JCL)Image created with Debian 10 Buster, must be running on Pi2, Pi3, Pi3B+ and Pi4, Bilingual in English and Spanish.

THIS IMAGE CONTAINS:

*DVSWITCH SERVER (with all Digital operating modes DMR, FUSION, DSTAR, NXDN andP25) IS HOW TO HAVE A DIGITAL WALKY WITH ALL DIGITAL SYSTEMS.

*.-SERVER DMR HBLINK3 WITH IMPROVED DASHBOARD HBMONITOR.

ACCESS DATA TO THE PI:

FOR SSH: Configured on the usual port of this connection, port 22 User: pi PASS: ea5gvk

VNC ACCESS: Usual port for this connection 5900 User: pi PASS: ea5gvk ALSO HAS TEAMVIEWER ACCESS FOR YOU TO CONFIGURE IT.

WEB ACCESS: http://IP-RASPBERRY:7681

FIXED CONFIGURATION DATA – INFORMATIVE

RELATED TO THE AMBE EMULATOR OR PHYSICAL:

Port Ambe3000 Emulator 2470 Ambe3000 hardware : /dev/ttyUSB0 - Puerto 2471 file log: /tmp/ambe.log

The Speed is configurable by the Configuration Script, 230400 baud (AMBE ARDUINO-MEGA 2560) or 460800 baud (ThumbDV, DVSTICK30 or BAO3000). EA5G

VK.ES

Rev V.2.0 Update

2

01 de octubre de 2019

RELATIVE TO THE USRP PORT USED IN THE IMAGE: APRTADO. ANALOG_BRIDGE Port USRP --> 46001 UDP. HOW TO CONFIGURE THROUGH OUR MENU STEP BY STEP OUR DVSWITCH SERVER The configuration menu can be accessed via SSH terminal, VNC and via WEB. MODE SSH: MODE VNC OR TEAMVIEWER: As soon as we start the image, we will see all the informative consoles of the services working and the central menu with blue background, which we must follow step by step guided for the configuration. INTRO

Now we must follow the following guided steps in the menu.

EA5GVK.ES

Rev V.2.0 Update

3

01 de octubre de 2019

Step 1 We give to intro or enter to follow the steps, we must of Accept the conditions of use and responsibility of an experimental software. If you do not accept them you will not be able to continue.

Step 2 We choose the language to continue (English or Spanish).

EA5G

VK.ES

Rev V.2.0 Update

4

01 de octubre de 2019

Step 3 Then enter the configurator menu and press Enter.

Step 4 In the following menu you do not have the following General options to do; If it is the first time we should go directly to the Option "First Configuration DVSwitch".

EA5GVK.ES

Rev V.2.0 Update

5

01 de octubre de 2019

QUICK SETUP FIRST DVSWITCH CONFIGURATION

BASIC CONFIGURATIO

N HBLINK

UPDATE IMAGE

IN DEVELOPMENT,

WILL BE IMPLEMENTED

IN V.3.0

*.- DMR+ Home Reflector: This option allows us to change to the DMR+ NETWORK in case we are in HBLINK or BM and it will also ask us which is the Start Reflector in DMR+. *.- Change to BM *.- Change to HBLINK *.- Return to the previous menu.

*.- Update binaries: This option allows us to update the DVSwitch software from its original github. It will also update the Raspberry operating system. *Update scripts: This option allows us to update the version of the image we have, currently in the V.2. *Change IP Server BM. This option allows us to change the IP Server that by default is the Spanish to which we want, each time we choose the BrandMeister Network. We will get a Master list to point the IP of the server we want to connect to introduce the ip in the next step.

Change IP Server DMR+. This option allows you to do the same as the previous one, change DMR+ Master that comes by default.

EA5GVK.ES

Rev V.2.0 Update

6

01 de octubre de 2019

QUICK SETUP FIRST DVSWITCH CONFIGURATION

BASIC CONFIGURATIO

N HBLINK

UPDATE IMAGE

JUST ENTER OUR 7 DIGIT ID.

*IF PHYSICAL AMBE IS CHOOSED, WE WILL BE QUESTIONED IN THE FOLLOWING OPTION BATTERY SPEED; 230400 or 460800.

EA5GVK.ES

Rev V.2.0 Update

7

01 de octubre de 2019

MODE SSH (Terminal): We open a terminal, either in your LINUX or MAC PC, or simply in your Windows PC, through the cmd of the w10 that has incorporated already terminal or with the Putty software. Type command: ssh pi@la ip de tu raspberry

You will ask us for a password, which is the one mentioned in previous lines: ea5gvk

Type command: sudo ./inicio-disclaimer.sh

Then you have to follow the same steps, indicated in the MODE VNC, TEAMVIEWER Y VIA WEB. Indicated in the previous point.

EA5GVK.ES

Rev V.2.0 Update

8

01 de octubre de 2019

HOW TO CONFIGURE OUR DVSWITCH MOBILE APP 1º We open app and go to Accounts 2º We set up an account like this.

EA5G

VK.ES

Rev V.2.0 Update

9

01 de octubre de 2019

3º In this section and very important, we must regulate the entire level of TX, as shown in the illustration could be valid to start calibrating it with controls that pass us, or even lower the TX more, as for the RX would be good, so high, but it is a matter of taste. Once this is done, we should save the configuration in "Save" and we should go to the main tab "DIALER", where we should be already registered.

How to use it I show you in the video I posted on Youtube, follow the link https://youtu.be/McKWpM64kX4

HOW TO CHANGE THE DMR NETWORK FROM THE MOBILE APPLICATION.

TYPE *B y “SEND” BM. TYPE *D y “SEND” DMR+ TYPE *C y “SEND” HBLINK

EA5GVK.ES

Rev V.2.0 Update

10

01 de octubre de 2019

HOW TO RESTART RASPBERRY PI FROM THE MOBILE APPLICATION

TYPE *AA y “SEND” PI REBOOT.

IF WE ARE IN THE DMR+ NETWORK HOW TO SET A REFLECTOR BY DEFAULT

TYPE *A0 y “SEND” TYPE *A4 y “SEND” FOR DEFAULT REFLECTOR FOR DEFAULT REFLECTOR STARTING ON 4370. STARTING ON 4370. AND SO ON WITH ANY REFLECTOR FROM 4370 TO 4379. YOU CAN ALSO CHANGE THE TEMPORARY REFLECTOR, FROM THE KEYPAD OF THE APP, TYPING DIRECTLY FOR EXAMPLE 4372 AND "SEND" KEY, WE WILL HEAR THE SWEEPER, AFTER 30 MINUTES WILL RETURN TO THE REFLECTOR THAT HAS PRESET START WITH THE KEYS *A0,1,2, AND SO ON.

EA5GVK.ES

Rev V.2.0 Update

11

01 de octubre de 2019

DATA RELATING TO THE DMR HBLINK3 SERVER AND DASHBOARD (HBMONITOR). DMR HBLINK3 SERVER AND HBMONITOR. IS CONFIGURED AS MASTER-1 ip: ip-lan-raspberry py port: 55555 password: passw0rd HAS TG9990 THAT IS USED AS PARROT, IN SLOT2. DASHBOARD: http://your-ip:8080

NOTE: We are working together with the friend Jose Antonio EA7JCL, to make another simple management menu, step by step, so that you can easily configure your server, with rules and routing to other networks. Thanks, of course, to the authors of this software, DVSWITCH groups, Steve N4IRS, Mike Zingman - N4IRR, creator of the MMDVM G4KLX Jonathan, modification of the HBmonitor by SP2ONG, as well as to all those who collaborated, among them, Blasmaker Group, EA7GIB Blas, EA7JCL Jose Antonio. And I'll probably have some left in the inkwell, I hope you'll excuse me. SOURCES OF INFORMATION: https://dvswitch.groups.io/g/main/topics https://github.com/sp2ong/HBmonitor http://ea5gvk.es/

EA5GVK.ES