Quick Start GuidePROFESSIONAL SECURITY MADE EASY

StatementThank you for purchasing this product. ZOSI is committed to providing our customers with a high quality, reliable

security solution. ZOSI cannot assume responsibility for any consequences resulting from the use thereof.

Before InstallationThis product may require cabling. It is strongly suggested to test all products and parts before installation and cabling.

ApplicationsThe system is a standalone system. It need to connect with any monitor to start live view (Such as PC monitor, TV etc.)

By adding a 3.5” SATA hard drive to the DVR, you can record&playback videos.

By connecting the DVR to the Internet, you can view the cameras anywhere anytime.

NoteThis instruction is used to guide you install the system and remote surveillance, more instructions and details can be

downloaded from the CD which come with DVR.

Tech SupportWebsite: www.zositech.com Email: service@zositech.com

8 channel configuration shown. 4/16 channel will have

the respective number of video inputs.

*Not included/sold separately

Camera

Router

Power

Monitor/TV Mouse

Within seconds, you should see cameras’ image live view on screen.

User Name: admin

Password: No password required, just leave blank

Note: To protect your privacy, please right click Mouse > Go to Main Menu > Setup > Users to change your password.

Name: Choose a name for your system of your choice.

Enter the Device ID or Scan QR Code

User ID: Enter the DVR’s User Name (default: admin)

Password: Enter the DVR’s Password (default: No password required, just leave blank)

Device type: Choose DVR’s Channel

Tap Save

The app opens in Live View and streams video from all connected cameras.

Connect the Camera to DVR and Plug Camera to power.

Connect monitor to the DVR with HDMI,VGA,BNC port

Connect the DVR to Router with an Ethernet cable

Plug the mouse to the USB port

Plug DVR to power

1. Connecting your system

2. View on Smartphone

1

2 4

5

3

3

1

2

4

5

Step 1 Connect the DVR to the Internet

Unplug modem then connect router and device

Fibre Optic DSL Router

DVR/NVR

PC

RJ45 cable

WIFI or RJ45 Cable

DSL/CABLE MODEM

DSL/CABLE MODEM

DSL/CABLE MODEM

DSL/CABLE MODEM

ROUTERROUTER

ROUTER

DVR

1 2 3 4

B: How to test your DVR's network ?

A: How to connect DVR to LAN ?

(1) Right click Mouse > Go to Main Menu > Setup > Network

(2) Tick 'Obtain IP address automatically'

(3) Click 'Test', if 'OK' is displayed, the network is connected successfully.

Note: Please ensure DHCP in your router is open.

Step 3

Step 2

Run the App

Download App

Search ZOSI VIEW in App store or Google Play.Or Scan the QR Code to download the App.

A: Install the free ZOSI VIEW App.B: Tap I want register and enter your User name and password to create a new account.C: Login the App, Tap Manage Device > Tap + button.

D: Configure the following

E: Tap go back to Main Menu > Tap Live Preview > Tap to select paly camera > Tap Start preview.

ZOSI VIEW App store Google play

3. View on PC Client Software

Download ZOSI VIEW PC Client Software from CD, install and start it as below picture.

Account: same as the ZOSI VIEW account in smartphone

Password: same as the ZOSI VIEW account in smartphone

Enter main interface, and show it as following

Remark: The PC operation has the same 'create' & 'Delete' function as the Smartphone ZOSI VIEW.

1 2 3 4

Note: The QR Code & Device ID printed on the label.

3

1

2

4

5

6

1

2

3

4

5

611downloaded from the CD which come with DVR.

1downloaded from the CD which come with DVR.

Website: www.zositech.com Email: service@zositech.com1Website: www.zositech.com Email: service@zositech.com

8 channel configuration shown. 4/16 channel will have18 channel configuration shown. 4/16 channel will have

the respective number of video inputs.1the respective number of video inputs.

*Not included/sold separately1*Not included/sold separately

Camera1Camera

Monitor/TV1Monitor/TV

Within seconds, you should see cameras’ image live view on screen.1Within seconds, you should see cameras’ image live view on screen.

No password required, just leave blank1 No password required, just leave blank

To protect your privacy, please right click Mouse > Go to Main Menu > Setup > Users to change your password.1To protect your privacy, please right click Mouse > Go to Main Menu > Setup > Users to change your password.

Connect the Camera to DVR and Plug Camera to power.1Connect the Camera to DVR and Plug Camera to power.

Connect monitor to the DVR with HDMI,VGA,BNC port1Connect monitor to the DVR with HDMI,VGA,BNC port

Connect the DVR to Router with an Ethernet cable1Connect the DVR to Router with an Ethernet cable

Plug the mouse to the USB port1Plug the mouse to the USB port

1. Connecting your system1 1. Connecting your system111112121111111111111111111111111 2(2) Tick 'Obtain IP address automatically'

2(2) Tick 'Obtain IP address automatically'

(3) Click 'Test', if 'OK' is displayed, the network is connected successfully.

2(3) Click 'Test', if 'OK' is displayed, the network is connected successfully.

Note: Please ensure DHCP in your router is open.2Note: Please ensure DHCP in your router is open.2222Run the App2Run the App

Download App2Download App

ZOSI VIEW2ZOSI VIEW in App store or Google Play.Or Scan the QR Code to download the App.2 in App store or Google Play.Or Scan the QR Code to download the App.

Install the free2Install the free ZOSI VIEW2ZOSI VIEW App.2App.I want register2I want register 2 and enter your User name and password to create a new account.2and enter your User name and password to create a new account.

C: Login the App, Tap2C: Login the App, Tap Manage Device2Manage Device > 2 > Tap2Tap +2+ button2button.2.2ZOSI VIEW2ZOSI VIEW2App store2App store2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222Google play2Google play22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222 3 Enter the DVR’s Password (default: No

3 Enter the DVR’s Password (default: No

password required, just leave blank)

3password required, just leave blank)

Device type:

3Device type: Choose DVR’s Channel

3 Choose DVR’s Channel

The app opens in Live View and streams video from all connected cameras.3The app opens in Live View and streams video from all connected cameras.

go back to Main Menu > Tap Live Preview > Tap 3go back to Main Menu > Tap Live Preview > Tap 333333 to select paly camera > Tap Start preview.3 to select paly camera > Tap Start preview.3333333 3. View on PC Client Software3 3. View on PC Client Software

Download ZOSI VIEW PC Client Software from CD, install 3Download ZOSI VIEW PC Client Software from CD, install and start it as below picture.3and start it as below picture.33Enter main interface, and show it as following3Enter main interface, and show it as following3323233333434333333

5

35

63633333

Quick Start GuidePROFESSIONAL SECURITY MADE EASY

The system may not include Hard Disk depending on the kit you selected. This system works with most 3.5” SATA Hard Disk or 2.5” SATA Hard Disk.

1. Install a Hard Disk (if your system has preinstalled Hard Disk, please skip this step)

2. Record video

Right click mouse > Go to Main Menu > Setup > Record

You shall see the record settings for all channels. Change the record setting according to your preference and apply the changes.

Note:After installing a Hard Disk, you need to first format the Hard Disk before recording.

Right click the mouse > go to Main Menu > Disk Management > Select the Hard Disk > Click Format > Apply.

Note:Recording Priority: Alarm Recording > Motion Detection Recording > Manual Recording > Time Scheduled Recording.

Get into system Main Menu > Search, system presents picture as following.

① Unplug your DVR from power, unscrew and remove the top cover.

② Connect the SATA power and data cables from the DVR to the corresponding ports on your Hard Disk (as shown).

③ Place the Hard Disk into the DVR. Any cable should cross up over the Hard Disk.

④ Holding the Hard Disk and the DVR, gently turn it over and line up the holes on the Hard Disk with the holes on the DVR. Using a Phillips screwdriver, screw the provided screws into the holes. Assemble the cover.

4. Record video

5. Playback video

6. Motion Detection

8. Backup the video for memory

9. Upgrade the DVR

①

③

②

④

Select the channel Start playing

Search the video you want via time or Event, then play it.

Previous Record: Move to last recorded event

Next Record: Move to next recorded event

Fast Forward: video can be played at different speed, from 1/4 times to 16 times.

Rewind: Video play can be rewinded at 1 time, 8 times, 16 times and 32 times.

Screen Display Mode: Both single-screen and multi-screen are available. You can choose how many channels you want to playback one time.Channel without records presents blank screen.

Previous Record

Next Record

Rewind

Fast ForwardPlay/Pause

Next framePrevious frame

Single-screen display

Multi-screen display

Select Camera. Tick the Channel you want to record on motion detection.

Holding Time. Set recording time length after motion stop.

Trigger. Multi-channels can be set to record when detect the motion by one of cameras.For example,when camera 1 detects motion,camera 2 and camera 3 can be triggered to record as well.

Area. It is allowed to set sensitivity area of camera viewing range.

Click STAR to make the whole viewing range as sensitivity area;

Click Trash Box to remove sensitivity area;

Click and drag mouse to draw or erase the sensitive area.

Set motion Detection,DVR will record only when motion or movement is detected.

Right click mouse > Main Menu > Setup > Alarm > Motion > Motion detection.

The system records when motion is detected by the camera. An icon is shown when motion is detected.1. Plug an USB flash disk to your DVR’s USB port.

2. Right click the mouse > Main Menu > Backup > choose the channel and time period > Search > Choose the video clips you want to backup > Click Backup.

Click to save setting Click to exit

If your DVR need to upgrade , please contact us to get a upgrade software.

Step 1. Put software into U-Disk, and ensure software is at root directory as below.

Step 2. Put U-Disk into DVR port USB2.0.

Unplug the mouse from the front USB socket.

Step 3. Restart DVR(Power off and on), it will be upgraded automatically.

Note: Please wait for a few minutes until DVR interface presents.

As Color and luminance is important for sensitivity, so it's necessary to adjust its value at specific conditions. The default value is 4 while value range is from 1 to 8.

Right click mouse to show or hide control menu at screen bottom.

Test the setting by moving something or some one walk through grid area within camera view range. If DVR detects movement within grid area, a yellow hunanoid figure would be presented in the screen. The grid could not cover flag, trees or some other flow objects in the wind to avoid false alerts.

Set Time scheduled record, you may configure each channel to record at specific times based on time of day.

Right click the mouse > go to Main Menu >Setup > Schedule. The schedule for automatic recording can be set either of two ways.

1. By highlighting individual hours for specific days by using the pencil tool in the upper right of the window. The adjacent eraser tool removes the highlighting in a block. click on either the pencil or eraser tool to turn them off.

Settings can be copied and applied to any or all of the channels and to any other day.

2. Blocks of time to be recorded can also be set up by double clicking on a field adjacent to a day. Multiple schedules can be created and saved with start and stop times down to the minute. These can then be applied to multiple days and cameras.

REC

ZS V16.9

7. Time scheduled Record42. Record video42. Record video

Right click mouse > Go to Main Menu > Setup > Record 4Right click mouse > Go to Main Menu > Setup > Record

You shall see the record settings for all channels. Change the record setting according to your preference and apply the 4You shall see the record settings for all channels. Change the record setting according to your preference and apply the

After installing a Hard Disk, you need to first format the Hard Disk before recording.4After installing a Hard Disk, you need to first format the Hard Disk before recording.

Right click the mouse > go to Main Menu > Disk Management > Select the Hard Disk > Click Format > Apply.4Right click the mouse > go to Main Menu > Disk Management > Select the Hard Disk > Click Format > Apply.

Get into system 4Get into system Main Menu > Search4Main Menu > Search, system presents picture as following.4, system presents picture as following.

Unplug your DVR from power, unscrew and remove the top cover.4Unplug your DVR from power, unscrew and remove the top cover.

Connect the SATA power and data cables from the DVR to the corresponding ports on your Hard Disk (as shown).4Connect the SATA power and data cables from the DVR to the corresponding ports on your Hard Disk (as shown).

Place the Hard Disk into the DVR. Any cable should cross up over the Hard Disk.4Place the Hard Disk into the DVR. Any cable should cross up over the Hard Disk.

Holding the Hard Disk and the DVR, gently turn it over and line up the holes on the Hard Disk with the holes on the 4Holding the Hard Disk and the DVR, gently turn it over and line up the holes on the Hard Disk with the holes on the DVR. Using a Phillips screwdriver, screw the provided screws into the holes. Assemble the cover. 4DVR. Using a Phillips screwdriver, screw the provided screws into the holes. Assemble the cover. 4 5. Playback video4 5. Playback video4444444

①

4①

③4③

②

4②

④4④4 55 6. Motion Detection5 6. Motion Detection5Next Record

5Next Record

Select Camera.5Select Camera. Tick the Channel you want to record on 5Tick the Channel you want to record on motion detection.5motion detection.

Holding Time.5Holding Time. Set recording time length after motion stop.5Set recording time length after motion stop.

Trigger.5Trigger. Multi-channels can be set to record when detect 5Multi-channels can be set to record when detect the motion by one of cameras.For example,when camera 1 5the motion by one of cameras.For example,when camera 1 detects motion,camera 2 and camera 3 can be triggered to 5detects motion,camera 2 and camera 3 can be triggered to record as well.5record as well.

Area.5Area. It is allowed to set sensitivity area of camera viewing 5It is allowed to set sensitivity area of camera viewing range.5range.

Click 5Click STAR5STAR5to make the whole viewing range as 5to make the whole viewing range as sensitivity area;5sensitivity area;

Click 5Click Trash Box5Trash Box5to remove sensitivity area;5to remove sensitivity area;

Click and drag mouse to draw or erase the sensitive area.5Click and drag mouse to draw or erase the sensitive area.

Set motion Detection,DVR will record only when motion or movement is detected.5Set motion Detection,DVR will record only when motion or movement is detected.

Right click mouse > Main Menu > Setup > Alarm > Motion > Motion detection.5Right click mouse > Main Menu > Setup > Alarm > Motion > Motion detection.

The system records when motion is detected by the camera. 5The system records when motion is detected by the camera. 5An icon is shown when motion is detected.5An icon is shown when motion is detected.555Click to save setting5Click to save setting5Click to exit5Click to exit5As Color and luminance is important for sensitivity, so it's necessary to adjust its value at specific conditions. The default 5As Color and luminance is important for sensitivity, so it's necessary to adjust its value at specific conditions. The default value is 4 while value range is from 1 to 8.5value is 4 while value range is from 1 to 8.

Right click mouse to show or hide control menu at screen bottom.5Right click mouse to show or hide control menu at screen bottom.

Test the setting by moving something or some one walk through grid area within camera view range. If DVR detects 5Test the setting by moving something or some one walk through grid area within camera view range. If DVR detects movement within grid area, a yellow hunanoid figure would be presented in the screen. The grid could not cover flag, 5movement within grid area, a yellow hunanoid figure would be presented in the screen. The grid could not cover flag, trees or some other flow objects in the wind to avoid false alerts.5trees or some other flow objects in the wind to avoid false alerts.5Set Time scheduled record, you may configure each channel to record at specific times based on time of day. 5Set Time scheduled record, you may configure each channel to record at specific times based on time of day.

Right click the mouse > go to Main Menu >Setup > Schedule.5

Right click the mouse > go to Main Menu >Setup > Schedule.5 7. Time scheduled Record5 7. Time scheduled Record 6Recording Priority: Alarm Recording > Motion Detection Recording > Manual Recording > Time Scheduled Recording.6Recording Priority: Alarm Recording > Motion Detection Recording > Manual Recording > Time Scheduled Recording.6 8. Backup the video for memory6 8. Backup the video for memory66 9. Upgrade the DVR6 9. Upgrade the DVR

1. Plug an USB flash disk to your DVR’s USB port.61. Plug an USB flash disk to your DVR’s USB port.

2. Right click the mouse > Main Menu > Backup > choose the channel and time period > Search > Choose the video clips 62. Right click the mouse > Main Menu > Backup > choose the channel and time period > Search > Choose the video clips you want to backup > Click Backup.6you want to backup > Click Backup.

If your DVR need to upgrade , please contact us to get a 6If your DVR need to upgrade , please contact us to get a

Put software into U-Disk, and ensure software is 6Put software into U-Disk, and ensure software is at root directory as below.6at root directory as below.6Step 3.6Step 3. Restart DVR(Power off and on), it will be 6Restart DVR(Power off and on), it will be

upgraded automatically.6upgraded automatically.666