Embed Size (px)
Citation preview
Please read this Operation Manual carefully before using your DVD Video Player.
DVD Video PlayerMODEL
DV-S1X
OPERATION MANUAL
4 NTSC/PAL
The region number for this DVD player is 4.
E56B5AD.QX3 02.8.24 11:18 AM Page 1
– 2 – EN
Power Cord ProtectionTo avoid any malfunctions of the Player, and to protectagainst electric shock, fire or personal injury, please observethe following.• Hold the plug firmly when connecting or disconnecting the
AC power cord.• Keep the AC power cord away from heating appliances.• Never put any heavy object on the AC power cord.• Do not attempt to repair or reconstruct the AC power cord
in any way.
SAFETY INFORMATION
Note:This Player can be used only where the power supply isAC 220V-240V, 50/60Hz. It cannot be used elsewhere.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS ORPERFORMANCE OF PROCEDURES OTHERTHAN THOSE SPECIFIED HEREIN MAY RESULTIN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS PLAYER ISHARMFUL TO THE EYES, DO NOT ATTEMPT TODISASSEMBLE THE CABINET. REFER SERVIC-ING TO QUALIFIED PERSONNEL ONLY.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS EQUIPMENT TORAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, AND ANNOYING INTERFERENCE, USETHE RECOMMENDED ACCESSORIES ONLY.
VIDEOR L CB
CRY
AUDIO OUT
S-VIDEO
VIDEO OUTCOMPONENT
COAXIALOPTICAL
DIGITAL
CAUTION - VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.AVOID EXPOSURE TO BEAM.
• This Player is classified as a CLASS 1 LASER product.• The CLASS 1 LASER PRODUCT label is located on the
rear cover.• This product contains a low power laser device. To ensure
continued safety do not remove any cover or attempt togain access to the inside of the product. Refer all servic-ing to qualified personnel.
Laser Diode PropertiesMaterial: GaAsWave length: DVD 650 nm / CD 780 nmEmission Duration: ContinuousLaser output: Max. 0.8 mW
E56B5AD.QX3 02.8.24 11:18 AM Page 2
– 3 – EN
Location and Handling• Do not place your Player in enclosed spaces or do not
cover it to prevent excessive temperatures inside thePlayer.
• Do not place the Player in direct sunlight, or near heatsources.
• Keep the Player away from strong magnetic objects.• Do not place any object containing water or other liquids
on the Player. In the event that liquid should enter thecabinet, unplug the Player immediately and contact theretailer or service centre approved by SHARP immediate-ly.
• Do not remove the Player cabinet. Touching parts insidethe cabinet could result in electric shock and/ or damageto the Player. For service and adjustment inside the cabi-net, call a qualified dealer or service centre approved bySHARP.
Nonuse PeriodsWhen the Player is not being used, switch the Player to theStandby mode.When left unused for a long period of time, the Player shouldbe unplugged from the household AC outlet.
No Fingers or Other Objects InsideDo not put any foreign object on the disc tray.
StackingPlace the Player in a horizontal position, and do not placeanything heavy on it.
CondensationMoisture may form on the pickup lens in the following condi-tions:• immediately after a heater has been turned on.• in a steamy or very humid room.• when the Player is suddenly moved from a cold environ-
ment to a warm one.If moisture forms inside this Player, it may not operate prop-erly.In this case, turn on the power and wait about one hour forthe moisture to evaporate.
CleaningUnplug your Player before cleaning. Use a damp cloth forcleaning. Do not use cleaning fluids or aerosols which couldenter the Player and cause damage, fire, or electrical shock.These substances may also deteriorate the finish of yourPlayer.
If there is Noise Interference on the TV While aBroadcast is being ReceivedDepending on the reception condition of the TV, interferencemay appear on the TV monitor while you watch a TV broad-cast and the Player is left on. This is not a malfunction of thePlayer or the TV. To watch a TV broadcast, turn off thePlayer.
SAFETY INFORMATION
Recommended Measures for Optimum PictureExcellenceThe Player is a precision device that is constructed usingextremely accurate technology.Soiling or friction affecting the pickup lens or disc drive canimpair the image quality. At the worst, neither video nor audiowill be played back. To obtain optimum picture quality, thePlayer should be checked (cleaning and replacement ofsome parts) every 1,000 hours. Note that this period variesdepending on the environment (temperature, humidity, dust,etc.) in which the Player is used. Contact your authorizedSharp supplier for details.
Apparatus Claims of U.S.Patent Nos. 4,631,603,4,577,216, 4,819,098 and 4,907,093 licensed for limitedviewing uses only.
This product incorporates copyright protection technologythat is protected by method claims of certain U.S. patentsand other intellectual property rights owned by MacrovisionCorporation and other rights owners. Use of this copyrightprotection technology must be authorized by MacrovisionCorporation, and is intended for home and other limitedviewing uses only unless otherwise authorized byMacrovision Corporation. Reverse engineering or disas-sembly is prohibited.
Do not attempt to clean the pickup lens yourself.
ServiceDo not attempt to service this Player yourself. Please referany service to the nearest service centre approved bySHARP.
CopyrightCopyright may exist in material you wish to record. Copyingsuch material without permission of the relevant licenses(s)or owner(s) of the copyright is prohibited by law.SHARP is not in a position to authorize the recording ofcopyright works and nothing in this manual should be read orimplied as giving that authority.
Copy ProtectionThis Player supports Macrovision copy protection. On DVDsthat include a copy protection code, if the contents of theDVD are copied using a VCR, the copy protection code pre-vents the videotape copy from playing normally.
E56B5AD.QX3 02.8.24 11:18 AM Page 3
– 4 – EN
PRECAUTIONS
The following symbols appear below in some headings andnotes in this manual, with the following meanings!
: Description refers to playback of DVD video discs.
: Description refers to playback of audio CDs.
: Description refers to playback of MP3 discs.
MP3
CD
DVD
• Remote control• Two R6 (AA) batteries• Operation Manual• VIDEO/AUDIO cable
SUPPLIED ACCESSORIES
SYMBOLS USED IN THIS MANUAL
For Customer Use:
Read carefully the information located at the bottom of yourDVD player and enter below the Serial No.Retain this infor-mation for future reference.
Model No. DVD playerSerial No. __________________________
This DVD player conforms to the PAL colour system. Alsoyou can play discs recorded with the NTSC system via a PALsystem TV set.•Some discs include region codes as shown below.
•The number inside the symbol refers to a region of theworld, and a disc encoded in a specific region format canonly be played back on DVD player with the same regioncode.
4
PLAYABLE DISCS
E56B5AD.QX3 02.8.24 11:18 AM Page 4
– 5 – EN
TABLE OF CONTENTS
SAFETY INFORMATION ....................................2
PRECAUTIONS...................................................4SUPPLIED ACCESSORIES.....................................4SYMBOLS USED IN THIS MANUAL .......................4PLAYABLE DISCS....................................................4
FUNCTIONAL OVERVIEW .................................6FRONT PANEL.........................................................6REAR VIEW..............................................................6Display Message ......................................................6REMOTE CONTROL................................................7Loading the Batteries ...............................................7
SETTING UP YOUR DVD PLAYER ....................8Connecting to a TV or a stereo TVthat has COMPONENT VIDEO in jacks ...................8Connecting a TV Equipped with S-VIDEO Input orVIDEO/AUDIO Input Jacks .......................................9Connecting to Audio Equipment...............................9
Playing 2 channel audio ......................................9Playing Dolby Digital (5.1 channel), DTS or MPEG audio ......................................................11
DVD OPERATION .............................................12Basic Playback .......................................................12General Features....................................................12Disc menus.............................................................12Title Menu...............................................................12Pause .....................................................................12Step by Step playback ...........................................13Resume ..................................................................13Fast Forward / Reverse Search..............................13Slow Motion ............................................................13Zoom ......................................................................13Track .......................................................................13Title/chapter ............................................................14Time Search ...........................................................14
Repeat ....................................................................14REPEAT TITLE/CHAPTER................................14REPEAT TRACK................................................14REPEAT A-B......................................................14
Programme.............................................................14Random Playback...................................................14MP3 Playback.........................................................15On Screen Information ...........................................15Track Selection .......................................................15Random Playback .................................................15Programmed...........................................................15Audio Language .....................................................15Stereo Sound Mode ...............................................15Subtitle Language...................................................16Camera Angle.........................................................16Changing the On-Screen Display...........................16Parental Control......................................................16
IF YOU FORGET THE PASSWORD .................16Parental Level .........................................................17Marker Setup Screen .............................................17
DVD SETUP ......................................................18Audio Setting ..........................................................18Black Level Setting .................................................18Display Setting........................................................18Language Setting ...................................................19
TROUBLESHOOTING ......................................20
SPECIFICATIONS.............................................21
MAINTENANCE ................................................21
E56B5AD.QX3 02.8.24 11:18 AM Page 5
VIDEOR L CB
CRY
S-VIDEO
VIDEO OUTCOMPONENT
COAXIALOPTICAL
AUDIO OUTDIGITAL
10 1211 13 14 1615
REAR VIEW
Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
Display Message
– 6 – EN
PLAYPLAY STOP
STILL/STILL/PAUSEPAUSESTANDBYSTANDBY
OPEN/CLOSE
SKIP
REV FWD
OPERATEOPERATE
2 43 5
1 9 8 7 6
FRONT PANEL
1. OPERATEto switch the player to ON or OFF
2. Disc tray3. OPEN/CLOSE
to open/close the disc tray4. PLAY
to start, pause or resume disc playback5. STOP
to stop playback6. FWD/SKIP
goes to next chapter or track during playback; press andhold for three seconds for a forward search
7. SKIP/REVgoes to previous chapter or track during playback; pressand hold for three seconds for a reverse search
8. STILL/PAUSEto pause the current disk operation
9. Display, Remote Sensor, STANDBY LED
FUNCTIONAL OVERVIEW
10. MAINS (AC Power Cord)connect to a standard AC outlet
11. OPTICAL (Digital audio out)connect to digital (optical) audio equipment
12. COAXIAL (Digital audio out)connect to AUDIO inputs of a digital (coaxial) audioequipment
13. AUDIO OUT (Left/Right)connect to AUDIO inputs of an amplifier, receiver orstereo system
14. VIDEO OUTconnect to the Video Input of a TV.
15. COMPONENT VIDEO OUTconnect to a TV with Component video in jacks.
16. S-VIDEO Outconnect to a TV with S-Video inputs
Caution: Do not touch the inner pins of the jacks on therear panel. Electrostatic discharge may cause permanentdamage to the unit.
E56B5AD.QX3 02.8.24 11:18 AM Page 6
– 7 – EN
1. ON SCREENto access or remove the display screen during DVD orAudio CD playback
2. OPERATEswitch DVD player ON or OFF
3. AUDIOto choose audio languages or sound modes
4. SUBTITLEsubtitle language DVD selector
5. ANGLEselect DVD camera angle
6. REPEATrepeat chapter, track, title, disc
7. A-B REPEATrepeat a specific segment
8. CLEARto reset the setting
9. STILL/PAUSEpause playback temporarily / frame-by-frame playback
10. hh
to view DVD picture in fast reverse motion11. PLAY
to start a DVD disc playback12. SETUP
to access or remove the DVD setup menu13. MODE
to set up programmed or random playback (Audio CD)to set the black level during DVD playback
14.ZOOMenlarge DVD video image
15. TITLEto display title menu of a disc
16. ENTERacknowledge menu selection
17. RETURNto return previous or remove setup menu
18. Arrow(L K B s)(left/right/up/down) select an item in the menu
19. MENUto display the menu of the DVD disc
20. STOPto stop a DVD disc playback
21. gg
to view DVD picture in fast forward motion22. SKIP H,G
to skip chapter/tracks23. 0-9 numerical key pad
select numbered items in a menu+10use this button to enter number 10 and above
24. OPEN/CLOSEto open/close the disc tray
25. DIRECT SKIPto locate a desired point
1. Open the battery compartment cover.2. Insert two R6 (AA) batteries, with each one oriented
correctly.3. Close the cover.
NOTES• Do not mix alkaline and manganese batteries.• Do not mix old and new batteries.
Loading the Batteries
REMOTE CONTROL
RETURNZOOM
MODE
MENU
SKIPSTILL/PAUSEA-B
REPEAT
ANGLE
AUDIO
SUB TITLE
CLEAR
TITLE
STOP
PLAYFWDREV
SETUP
ENTER
OPEN/CLOSEDIRECT SKIPON SCREEN
1 2 3
4 5 6
7 8 9
0 +10
OPERATE
C
1
23
4
5
6
789
1011
14
12
13
15
18
19
1716
2120
22
23
24
25
FUNCTIONAL OVERVIEW
E56B5AD.QX3 02.8.24 11:18 AM Page 7
– 8 – EN
SETTING UP YOUR DVD PLAYER
Connecting to a TV or a stereo TV that has COMPONENT VIDEO in jacks
CAUTION:• Be sure to turn off the Player and equipment to be connected before connecting.• Read through the operation manual for the equipment to be connected.• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable.• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programs.
CAUTION:• Do not connect the Player to a VCR. If you view the
Picture on your TV after making the connections shownon the right, a picture noise may appear. Connect thePlayer to your TV directly.
DVDPlayer
VCR
TV
TV
DVD Player
RL Y CR CB
ANALOG INPUT VIDEO INPUTCOMPONENT
VIDEOR L CB
CRY
S-VIDEO
VIDEO OUTCOMPONENT
COAXIALOPTICAL
AUDIO OUTDIGITAL
To ANALOG AUDIO OUT jacks
To COMPONENT VIDEO OUT jacks
To COMPONENT VIDEO INPUT jacks
(Red) (White)
(Red)(White)To ANALOG AUDIO INPUT jacks
AUDIO cable(supplied)
COMPONENT cable(commercially available)
E56B5AD.QX3 02.8.24 11:18 AM Page 8
– 9 – EN
SETTING UP YOUR DVD PLAYER
• When the Player is connected to a TV using both a VIDEO cable and an S-VIDEO cable, only the S-VIDEO connection isenabled (the VIDEO connection is disabled).
• You will not be able to hear all of the sound being output by the Player if you use the VIDEO/AUDIO cable (supplied) to amonaural TV that has only one AUDIO input jack.
NOTE:• Be sure that the colours of the jacks and plugs match up when connecting the cable.• Connect the Player directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection func-
tion will scramble the picture.• If you want to listen to the audio through audio equipment, connect only the S-VIDEO or VIDEO cable to the TV.
Connecting a TV Equipped with S-VIDEO Input or VIDEO/AUDIO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector to the Player,you should use an S-VIDEO cable (commercially available) to connect the TV to the Player.
Connecting the Player to audio equipment provides normal stereo sound plus powerful stereo sound enhanced by DolbyDigital (5.1 channel), DTS, and MPEG Audio.
Connecting to Audio Equipment
CC Analogue Connection
Playing 2 channel audio
TV (with external input jacks)
RL
AUDIOINPUT
S-VIDEOINPUT
VIDEOINPUT
VIDEO/AUDIO cable(supplied)
S-VIDEO cable(commercially available)
DVD Player
VIDEOR L CB
CRY
S-VIDEO
VIDEO OUTCOMPONENT
COAXIALOPTICAL
AUDIO OUTDIGITAL
To VIDEO/AUDIOOUT jacks
To S-VIDEOOUT jack
(Yellow)(Red)(White)
(Yellow)(Red)(White)
To VIDEO/AUDIOINPUT jacks
To S-VIDEOINPUT jack
ANALOG INPUT
R
L
DVD Player
VIDEOR L CB
CRY
S-VIDEO
VIDEO OUTCOMPONENT
COAXIALOPTICAL
AUDIO OUTDIGITAL
AUDIO cable(supplied)
Amplifier of stereo system, etc.
To AUDIOOUT jacks
(Red) (White)
(Red)
(White)
Jack and Plug Colours
To amplifieraudio input jacks
Audio Left: WhiteAudio Right: Red
E56B5AD.QX3 02.8.24 11:18 AM Page 9
– 10 – EN
SETTING UP YOUR DVD PLAYER
CC Digital Connection
You can make this connection using either a coaxial digital cable or an optical digital cable.
Digital Connection to an MD to Record a CDSome Audio CDs have a short silent section between musical tracks. When sound from discssuch as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),the music may be recorded continuously and track numbers may be lost.
CC Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder• Audio CD
Play the disc as you normally would, with the audio mode set to “L+R”. With a digital connection, audio of a disc recordedwith DTS sounds abnormal in this case.
• DVDWith a digital connection, audio cannot be produced from a DVD recorded in Dolby Digital (5.1 channel), Dolby Surround(Pro Logic), DTS or MPEG Audio.You should use an analogue connection to play Dolby Digital (5.1 channel) and MPEG Audio. (Dolby Surround (Pro Logic)and DTS audio cannot be produced with an analogue connection).Discs with linear PCM audio should play normally.
DVD Player
VIDEOR L CB
CRY
S-VIDEO
VIDEO OUTCOMPONENT
COAXIALOPTICAL
COAXIALOPTICAL
DIGITAL IN
AUDIO OUTDIGITAL
Coaxial digital cable(commercially available)
To optical digitalinput jack
or
To OPTICALDIGITAL OUTjack
Optical digital cable(commercially
available)
To coaxial digitalinput jack
To COAXIALDIGITAL OUTjack
Audio equipment withoptical/coaxial digital input jack
E56B5AD.QX3 02.8.24 11:18 AM Page 10
– 11 – EN
CC Connection to a processor or amplifier with an optical/coaxial digital input jack
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/DTS/MPEG Audiosurround processor to your Player’s optical/coaxial digital jack provides richer and more powerful audio play.
You can make this connection using either a coaxial digital cable or an optical digital cable.
NOTES:• This connection is not possible if the processor or amplifier to which you want to connect does not have an optical/coaxial
digital input jack.• ANALOG AUDIO OUT of the DVD player is not available on the DTS audio.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKSIf your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio andvideo outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output ofthe RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction sup-plied with the RF Modulator for more details.If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cablefrom your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked“ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.NOTE• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
Manufactured under license from DolbyLaboratories. “Dolby” and the double-Dsymbol are trademarks of DolbyLaboratories.
“DTS” and “DTS Digital Out” are trademarksof Digital Theater Systems, Inc.
DVD Player
DIGITAL IN
COAXIALOPTICAL
VIDEOR L CB
CRY
S-VIDEO
VIDEO OUTCOMPONENT
COAXIALOPTICAL
AUDIO OUTDIGITAL
To optical digitalinput jack
To coaxial digitalinput jack
orTo OPTICALDIGITAL OUTjack
To COAXIALDIGITAL OUTjack
Optical digital cable(commercially
available)
Coaxial digital cable(commercially available)
Dolby Digital (5.1 ch)/DTS/MPEG Audio processoror amplifier
SETTING UP YOUR DVD PLAYER
E56B5AD.QX3 02.8.24 11:18 AM Page 11
– 12 – EN
Getting startedTurn on the power of the TV, amplifier and any other compo-nents which are connected to the DVD.Make sure the TV and audio received (optional) are set tothe correct channel.When you play NTSC disk, the NTSC signal will convert to amodified PAL signal.
Press OPERATE.• “P-ON” will appear briefly on the display panel.Press OPEN/CLOSE to open disc loading tray.Place the chosen disc in the tray, with the labelfacing up.
Press PLAY.• Playback starts automatically.Press STOP to stop playback.
NOTE:• DVDs may have a region code. Your DVD player will not
play discs that have a region code different from theregion code of your DVD player.
5
4
32
1
CDDVD
Press MENU.• The DVD’s main menu will appear.If a title menu is no available, symbol mayappear on the TV screen.If disc menu is available on the disc, audio lan-guage, subtitle options, chapters for the title andother options will appear for selection.Press Arrow ( L / K / B / s ) to select an item, andENTER to confirm selection.
4
3
2
1
DVD
DVD OPERATION
Basic Playback
Disc menus
DVDs may contain menus to navigate the disc and accessspecial features. Press the appropriate numerical key or useArrow ( L / K / B / s ) to highlight your selection in the DVDmenu and press ENTER to confirm.
NOTE:• Unless stated, all operations described are based on
remote control use. Some operations can be carriedout using the menu bar on the TV screen.
General Features
Press TITLE.• The title menu will appear.If a title menu is no available, symbol mayappear on the TV screen.Press Arrow ( L / K / B / s ) to select an item, andENTER to confirm selection.• Playback will begin at the selected Title.
3
2
1
DVD
During playback, press PAUSE.• Playback will pause and sound will be muted.To continue playback, press PLAY.2
1
CDDVD
Title Menu
Pause
E56B5AD.QX3 02.8.24 11:18 AM Page 12
– 13 – EN
During playback, press PAUSE.• Playback will pause and sound will be muted.The disc goes forward by one frame each timePAUSE is pressed.To exit step by step playback, press PLAY.3
2
1
DVD
During playback, press STOP.• Resume message will appear on the TV screen.Press PLAY, playback will resume from the pointat which playback was stopped.• To cancel resume, press STOP twice.
2
1
CDDVD
Resume
Step by Step playback
During playback, press gg or hh repeatedly toselect the required forward or reverse speed: x2,x8, x30, x60.To return to normal playback, press PLAY.
• Use gg or hh to select the required forward orreverse at x16 the normal playback speed.
CD
2
1
DVD
Fast Forward / Reverse Search
During playback, press PAUSE.Press gg.• Slow motion playback will begin and sound will be
muted.Press gg repeatedly to select the required speed:1/16, 1/8, 1/2 of the normal playback.To return to normal playback, press PLAY.4
3
21
DVD
Slow Motion
The Zoom function allows you to enlarge the video imageand to pan through the enlarged image.
During playback, press ZOOM.• Playback will continue.Press ZOOM repeatedly to select the requiredzoom factor: x2, x4 or OFF.Use Arrow ( L / K / B / s ) to move the zoomedpicture across the screen.To exit zoom mode, press ZOOM to OFF in themenu bar.
4
3
2
1
DVD
Zoom
There are three ways to begin playback on an Audio CD at aspecific Track.
Using the Numerical key padsPress numerical key pad to enter the desiredTrack number.• Playback will start at the selected track.• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).• To play track 26, press +10, 2, 6 on the numerical key
pad.
Using the DIRECT SKIPPress DIRECT SKIP.• The track search display appears.Within 30 seconds, select a desired track number usingnumerical key pad.• Playback will start at the selected track.
Using the SKIP HH GG
Press SKIP GG to move to the next track.Press SKIP GG or HH repeatedly to skip subsequent orto return of the current tracks.• Track number will appear briefly on the DVD display
panel.• When playback is paused, pressing SKIP will start the
track playing automatically.
NOTE:• SKIP H G are not available when playback is
stopped.
21
2
1
1
CD
Track
DVD OPERATION
E56B5AD.QX3 02.8.24 11:18 AM Page 13
Press DIRECT SKIP to display the Title/ChapterSearch on the TV screen.Enter the desired title/chapter number usingnumerical key pad.
2
1
DVD
Title/chapter
During playback, press DIRECT SKIP twice to dis-play the Time Search on the TV screen.Within 30 seconds, enter a desired disc time usingnumerical key pad.• Playback will start at the specified time.
Press CLEAR to erase the incorrect input.3
2
1
CDDVD
Time Search
• To repeat the current chapter, press REPEAT.REPEAT CHAPTER appears on the TV screen.
• To repeat the current title, press REPEAT twice.REPEAT TITLE appears on the TV screen.
• To exit Repeat mode, press REPEAT three times.REPEAT OFF appears on the TV screen.
DVD
Repeat
REPEAT TITLE/CHAPTER
• To repeat the current track, press REPEAT.REPEAT TRACK appears on the TV screen.
• To repeat the entire disc, press REPEAT twice.REPEAT ALL appears on the TV screen.
• To exit Repeat mode, press REPEAT three times.REPEAT OFF appears on the TV screen.
CD
REPEAT TRACK
REPEAT A-B
Press Repeat A-B at your chosen starting point.• REPEAT A- appears briefly on the TV screen.
Press Repeat A-B again at your chosen end point.• REPEAT A-B appears briefly on the TV screen, and the
repeat sequence begins.To exit the sequence, press Repeat A-B.3
2
1
CDDVD
You may determine the order in which tracks will play.In stop mode press MODE.• The programme screen will appear.
Enter the desired track numbers using numericalkey pad.Press PLAY to play the programmed tracks.3
2
1
CD
Programme
PROGRAM TIME 0:00:00 1/1
RANDOM: MODE EXIT: RETURNSTART: PLAY DELETE: CLEAR
--
This shuffles the playing order of tracks instead of playbackin the sequence.
In stop mode press MODE twice.• RANDOM screen appears.Press PLAY to start random playback.2
1
CD
Random Playback
– 14 – EN
DVD OPERATION
• REPEAT are available only during playback.
E56B5AD.QX3 02.8.24 11:18 AM Page 14
– 15 – EN
DVD OPERATION
When a CD with MP3 files in the DVD player, the MP3 menuwill appear on the TV screen.
In stop mode press K or L to select the desiredAlbum or Track.• To play a choosen track, press PLAY or ENTER.• To play a choosen album, press K or L to select the
desired track,then press PLAY or ENTER.• Choose FIRST PLAY to start playback from the begin-
ning of the listed tracks.• Press TITLE to return to the first item.Press STOP to stop playback.
NOTE:• Folders are known as Albums; files are known as Tracks.
2
1
MP3
MP3 Playback
Track Selection
During playback, press DIRECT SKIP.• The SEARCH menu will appear.• The current track will be highlighted.
Press K or L to select a desired track.
Press PLAY to start playingPress RETURN or DIRECT SKIP to exit.4
3
2
1
MP3
+ALBUM01TRACK11TRACK12TRACK13TRACK14
ALBUM NAME
1/15
START: PLAYSELECT: / ENTER:RETURN:
In stop mode press MODE.Press K or L to select a track, then press ENTER.• Press CLEAR to erase the incorrect input.
Press PLAY to start programmed playback.3
21
MP3
In stop mode press MODE twice.Press PLAY to play the tracks in random order.2
1
MP3
Programmed
Random Playback
RANDOM: MODE EXIT: RETURNSTART: PLAY DELETE: CLEAR
+ALBUM11+ALBUM12TRACK11TRACK12TRACK13
TRACK11
PROGRAM - ALBUM01
1/11 1/1
The DVD player allows you to select a language during DVDdisc (if multi language available) playback.
During playback, press AUDIO.Press AUDIO repeatedly to select your desiredlanguage.
NOTE:• When a DVD disc with MPEG 5.1CH Audio is played
back, MPEG 6.0CH might appear instead of MPEG5.1CH on the screen.
21
DVD
Audio Language
During playback, press AUDIO repeatedly to selectbetween AUDIO STEREO, AUDIO L-CH or AUDIOR-CH.
AUDIO STEREO - both right and left channels are active(stereo)AUDIO L-CH - only left channel is activeAUDIO R-CH - only right channel is active
1
CD
Stereo Sound Mode
You can check the MP3 files during playback.Press ON SCREEN.• The playing track will be highlighted.Press ON SCREEN again to show the elapsedplaying time appear at the top of the display.• will be displayed when the repeat play has been
selected.T - indicates Track repeatA - indicates Album (folder) repeatD - indicates Disc repeat
Press ON SCREEN again to exit.3
2
1
MP3
On Screen Information
Some DVD discs contain scenes which have been shotsimultaneously from various angles.
During playback, press ANGLE.Press ANGLE repeatedly to select your desireddifferent angle appears on the right of the angledisplay.
21
DVD
The DVD player allows you to select a language for subtitleduring DVD disc (if available) playback.
During playback, press SUBTITLE.Press SUBTITLE repeatedly to select your desiredsubtitle language.• The available languages appears on the right of the
subtitle display.To turn off subtitles, press s / B or SUBTITLErepeated until OFF appears.
3
21
DVD
Subtitle Language
Camera Angle
You can check information about the current disc by pressingthe ON SCREEN on the remote control.
During playback, press ON SCREEN to show cur-rent Chapter.• The elapsed and remaining playing time of the current
chapter will be displayed.Press ON SCREEN again to show current Title.• The elapsed and remaining playing time of the current
title will be displayed.Press ON SCREEN the third time.• The BIT RATE, layer number (if available) and the cur-
rent repeat setting will be displayed.Press ON SCREEN the fourth time to remove thedisplay.
4
3
2
1
DVD
Changing the On-Screen Display
During playback press ON SCREEN, the currentTrack will be displayed on the TV screen.• The elapsed and remaining playing time of the current
title will be displayed.Press ON SCREEN again to show current TotalTrack.• The elapsed and remaining playing time of the current
total track will be displayed.Press ON SCREEN the third time to remove thedisplay.
3
2
1
CD
PasswordParental Control limits the disc viewing that exceed your set-tings with a password or playback will stop.The ‘Parental Control’ feature allows you to prevent discsfrom being played by your children or to have certain discsplayed with alternative scenes.
In stop mode press SETUP.
Press K or L to select PARENTAL, then pressENTER.
Enter your four-digit password.• If for the first time, enter any four digits, then press
ENTER.• To change the password, press K or L to select
CHANGE, then press ENTER. Enter the four-digit pass-word, then press ENTER.
Press SETUP to exit.4
3
2
1
1.LANGUAGE2.DISPLAY3.AUDIO4.PARENTAL
SET-UP
EXIT: SETUP CANCEL: RETURNSELECT: / SET: ENTER
Please enter a 4-digit password.- - - -
SET-UP
EXIT: SETUP CANCEL: RETURN
PARENTAL CONTROLS
PASSWORD
Parental Control
– 16 – EN
DVD OPERATION
IF YOU FORGET THE PASSWORD
In stop mode press SETUP.Press K or L to select PARENTAL, then pressENTER.Enter the 4, 7, 3, 7.• Password will be cleared and parental level will be set
ALL.Press SETUP to exit.4
3
21
E56B5AD.QX3 02.8.24 11:18 AM Page 16
– 17 – EN
DVD OPERATION
Use markers to memorise your favourite places on a disc.
During playback, press DIRECT SKIP three times.• The display screen and Markers will appear on the TV
screen.Press s or B to select 1, 2, 3, 4 or 5 and ensurethat “NOT SET” appears in the display.When reaches the desired point, press ENTER.• The Title or Track and elapsed playing time will appear
in the TV screen.To return to the Marker later, press DIRECT SKIPthree times during playback and s or B to choosethe desired marker, then press ENTER.
NOTE:• Opening the disc tray or turning off the power or select
AC at step and press ENTER will erase all Markers.2
4
3
2
1
CDDVD
Marker Setup Screen
Parental Level allows you to set the rating level of your DVDdiscs. Playback will stop if the disc’s ratings exceed the levelyou set.
In stop mode press SETUP.Press K or L to select PARENTAL, then pressENTER.Enter your four-digit password.Press K or L to select PARENTAL LEVEL, thenpress ENTER.
Press K or L to select the desired level.Press SETUP to exit.6
5
43
21
DVD
1.PARENTAL LEVEL ALL2.CHANGE
SET-UP
EXIT: SETUP CANCEL: RETURNSELECT: / SET: ENTER
PARENTAL CONTROLS
Parental Level
E56B5AD.QX3 02.8.24 11:18 AM Page 17
You can change certain aspects of the DVD’s displayscreens, on-screen messages and the display panel on thefront of the DVD player.
In stop mode press SETUP.Press K or L to select DISPLAY, then pressENTER.Press K or L to select the below items, then pressENTER.
TV Aspect:• Press K or L for an item selection, then press
ENTER.• Select 4:3 LETTER BOX for a black bars appears on
the top and bottom of the screen.• Select 4:3 PAN & SCAN for a full height picture with
both sides trimmed.• Select 16:9 WIDE if a wide-screen TV is connected to
the DVD player.
Panel Display:• Press K or L to select BRIGHT, DIMMER and AUTO,
then press ENTER.• This adjust the brightness of the display panel with the
factory default BRIGHT.• When AUTO is selected, the display dims only during
playback.
Angle Icon:• Press ENTER repeatedly to turn Angle icon ON or
OFF.• The default setting is ON.
Auto Power Off:• Press ENTER repeatedly to turn Auto Power ON or
OFF.• The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.Press SETUP to exit.4
3
21
Display Setting
Choose the appropriate Audio settings for your equipment asit only affect during the playback of DVD discs of the DVDplayer.
NOTE:• These audio settings are effective only when using a digi-
tal connection. Although you may change the settings fromthe on-screen display, these audio settings do not actuallyaffect the sound when using an analogue connection.In stop mode press SETUP.Press K or L to select AUDIO, then press ENTER.Press K or L to choose the below items and pressENTER repeatedly to turn the setting ON or OFF.
Dynamic Range Control (DRC):• The default setting is OFF.• To compress the range of sound volume.
Dolby Digital :• The default setting is BITSTREAM.
(BITSTREAM : Output by Dolby Digital)(DPCM : Convert the Dolby Digital to D-PCM)Set to BITSTREAM when the unit is connected toDolby Digital Decoder.
DTS:• The default setting is OFF.
Set to ON when the unit is connected to DTS Decoder.(ON: Output by DTS)
MPEG:• The default setting is OFF.
(ON : Output by MPEG sound)(OFF: Convert the MPEG to PCM)Set to ON when the unit is connected to MPEG Decoder.
DOWN SAMPLING:• The default setting is AUTO.• Press ENTER, then K or L to select AUTO, 48kHz or
96kHz. Press ENTER again to confirm selection.• Select 96kHz if the disc was recorded in PCM 96kHz,
otherwise select 48kHz.Press SETUP to exit.4
321
Audio Setting
– 18 – EN
DVD SETUP
Adjust the Black Level Settings to make the black parts ofthe picture as bright as you preferred.
During playback, press MODE .Press ENTER repeatedly to select ON or OFF.
ON: makes the dark parts brighter.OFF: shows the original picture as recorded.
21
Black Level Setting
E56B5AD.QX3 02.8.24 11:18 AM Page 18
– 19 – EN
DVD SETUP
A-BAbkhazian 4748Afar 4747Afrikaans 4752Albanian 6563Amharic 4759Arabic 4764Armenian 5471Assamese 4765Aymara 4771Azerbaijani 4772Bashkir 4847Basque 5167Bengali;Bangla 4860Bhutani 5072Bihari 4854Bislama 4855Breton 4864Bulgarian 4853Burmese 5971Byelorussian 4851
C-ECambodian 5759Catalan 4947Chinese [CHI] 7254Corsican 4961Croatian 5464Czech 4965Danish [DAN] 5047Dutch [DUT] 6058English [ENG] 5160Esperanto 5161Estonian 5166
F-HFaroese 5261Fiji 5256Finnish [FIN] 5255
French [FRE] 5264Frisian 5271Galician 5358Georgian 5747German [GER] 5051Greek [GRE] 5158Greenlandic 5758Guarani 5360Gujarati 5367Hausa 5447Hebrew 5569Hindi 5455Hungarian [HUN] 5467
I-KIcelandic [ICE] 5565Indonesian 5560Interlingua 5547Interlingue 5551Inupiak 5557Irish [IRI] 5347Italian [ITA] 5566Japanese [JPN] 5647Javanese 5669Kannada 5760Kashmiri 5765Kazakh 5757Kinyarwanda 6469Kirghiz 5771Kirundi 6460Korean [KOR] 5761Kurdish 5767
L-NLaothian 5861Latin 5847Latvian;Lettish 5868Lingala 5860Lithuanian 5866
Macedonian 5957Malagasy 5953Malay 5965Malayalam 5958Maltese 5966Maori 5955Marathi 5964Moldavian 5961Mongolian 5960Nauru 6047Nepali 6051Norwegian [NOR] 6061
O-ROccitan 6149Oriya 6164Oromo(Afan) 6159Panjabi 6247Pashto;Pushto 6265Persian 5247Polish 6258Portuguese [POR] 6266Quechua 6367Rhaeto-Romance 6459Romanian [RUM] 6461Russian [RUS] 6467
SSamoan 6559Sangho 6553Sanskrit 6547Scots Gaelic 5350Serbian 6564Serbo-Croatian 6554Sesotho 6566Setswana 6660Shona 6560Sindhi 6550Singhalese 6555
Siswat 6565Slovak 6557Slovenian 6558Somali 6561Spanish [SPA] 5165Sundanese 6567Swahili 6569Swedish [SWE] 6568
TTagalog 6658Tajik 6653Tamil 6647Tatar 6666Telugu 6651Thai 6654Tibetan 4861Tigrinya 6655Tonga 6661Tsonga 6665Turkish [TUR] 6664Turkmen 6657Twi 6669
U-ZUkrainian 6757Urdu 6764Uzbek 6772Vietnamese 6855Volapuk 6861Welsh 4971Wolof 6961Xhosa 7054Yiddish 5655Yoruba 7161Zulu 7267
Language Code Language Code Language Code Language Code
Language options are not available is all discs.
In stop mode press SETUP.Press K or L to select LANGUAGE, then ENTERto confirm.• The setup screen will be displayed.
Press K or L to select AUDIO, SUBTITLE, DISCMENU or PLAYER MENU, then ENTER to confirm.Press K or L to select a setting, then pressENTER.• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter thecode for the desired language.
• You can only select other languages if its available onthe disc.
Press SETUP to exit.5
4
3
21
1.AUDIO ORIGINAL2.SUBTITLE OFF3.DISC MENU ORIGINAL4.PLAYER MENU ENGLISH
SET-UP
EXIT: SETUP CANCEL: RETURNSELECT: / SET: ENTER
LANGUAGE CONTROLS
Language Setting
If you choose a Language that has a 3 letter language code, the code will be displayed everytime you changethe Audio or Subtitle language setting on pages 15 and 16. If you choose any other languages, ‘---’ will be dis-played instead. (3 letter language code is written in bracket.)
E56B5AD.QX3 02.8.24 11:18 AM Page 19
TROUBLESHOOTING
– 20 – EN
WARNINGUnder no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open thesystem as there is a risk of electric shock.If a fault occurs, first check the points listed below before taking the system for repair.
Problem SolutionNo power –Check if the AC power cord is properly connected.No picture –Check if the TV is switched on.
–Check the video connectionDistorted picture –Sometimes a small amount of picture distortion may appear .This is
not a malfunction.Completely distorted picture or –Connect DVD player directly to the TV.black/white picture with DVD –Make sure the disc is compatible with the DVD player.No sound or distorted sound –Adjust the volume.
–Check that the speakers are connected correctly.No audio at digital output –Check the digital connections.
–Check if the audio format of the selected audio language matchesyour receiver capabilities.
No DTS audio at analog output –Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.No sound and picture –Check that the VIDEO/AUDIO cable is connected to the correct
device (See Connecting to a TV)Picture freezes momentarily –Check the disc for fingerprints/scratches and during playback clean with a soft cloth wiping from centre to edge.Disc can’t be played –Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.No return to start-up screen when –Reset the unit by switching the player off, then ondisc is removed again.The player does not respond to –Aim the remote control directly at the sensor onthe remote control the front of the player.
–Reduce the distance to the player.–Replace the batteries in the remote control.–Re-insert the batteries with their polarities (+/– signs) as indicated.
Buttons do not work or player stops –To completely reset the player, unplug the AC responding cord from the AC outlet for 5-10 seconds.Player does not respond to some –Operations may not be permitted by the disc.operating commands during playback. Refer to the instructions of the disc.DVD player cannot read –Use a commonly available cleaning CD/DVD toCDs/DVDs clean the lens before sending the DVD player for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
E56B5AD.QX3 02.8.24 11:18 AM Page 20
– 21 – EN
Cleaning the Cabinet• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a circular
motion.• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analogue
records.
Cleaning the disc lens• After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens
with CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with the cleaner.
MAINTENANCE
PRODUCT TYPEDVD Player
DISCSDVD videoAudio CDCD-RCD-RW
OUTPUT SIGNAL FORMATPAL colour
FREQUENCY RESPONSEDVD (linear sound) : 20 Hz to 20 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)CD : 20 Hz to 20 kHz
SIGNAL-TO-NOISE RATIO (S/N RATIO)CD : 110 dB (JEITA)
DYNAMIC RANGEDVD (linear sound) : 95 dBCD : 94 dB (JEITA)
TOTAL DISTORTION FACTORCD : 0.005% (JEITA)
WOW AND FLUTTERBelow the measurement limitation (+/-0.001% W PEAK)(JEITA)
CONNECTIONSVideo output One RCA connector, 1 Vpp (75
ohm)Component video output One pin jack (Y), 1 Vpp (75 ohm)
Two pin jacks (CR)/(CB), 700mVpp(75 ohm)
S-Video output Mini DIN 4-pin jack (75 ohm)Analog audio output Two RCA connectors (one left
channel, one right channel) 2 Vrms (47 kilo-ohm)
Coaxial digital audio output One pin jack, 500mVpp (75 ohm)Optical digital audio output Optical connector
POWER SOURCE220-240 V ~ +/- 10%, 50 Hz +/- 0.5%
POWER CONSUMPTION14 W (standby: 2.8W)
OPERATING TEMPERATURE5°C to 40°C
DIMENSIONSW 435mmH 75mmD 211mm
WEIGHTApprox 2.1kg
• Designs and specifications are subject to changewithout notice.
SPECIFICATIONS
Make your contribution to the environment!!!• Spent batteries do not belong in the dustbin.• You can dispose of them at a collection point for spent batteries or special waste.
Contact your council for details.
E56B5AD.QX3 02.8.24 11:18 AM Page 21
– 22 – EN
MEMO
E56B5AD.QX3 02.8.24 11:18 AM Page 22
– 23 – EN
MEMO
E56B5AD.QX3 02.8.24 11:18 AM Page 23
0VMN03274AE56B5AD ★★★
WARRANTYConsumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12) monthsfrom the date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories, defects or injuries caused by or resulting from causes notattributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury causedby or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermininfestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights andremedies under any relevant legislation in the country of sale.
IMPORTANTDO NOT RETURN THIS PAGE TO SHARP
For your reference, please enter the particulars of your purchase below and retain, with your purchasedocumentation.Model No.Serial No.Date of PurchaseRetailer
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
FOR LOCATION ENQUIRIES WITHINAUSTRALIA
REGARDING YOURLOCAL
SHARP APPROVED SERVICE CENTREVISIT OUR WEBSITE AT
www.sharp.net.auOR CALL SHARP
LOCAL CALL 1 300 135 022
SHARP CORPORATION OF AUSTRALIA PTY. LIMITEDA.B.N. 40 003 039 405
1 Huntingwood Drive Blacktown NSW 2148
FOR PRODUCTS PURCHASED INNEW ZEALAND
CONTACT YOUR SELLING DEALER/RETAILEROR CALL
SHARP CUSTOMER SERVICESTELEPHONE: 09 - 573 0111
FACSIMILE: 09 - 573 0113
SHARP CORPORATION OF NEW ZEALAND LIMITED59 Hugo Johnston Drive, Penrose Auckland
