Upload
lucifer1411
View
226
Download
0
Embed Size (px)
Citation preview
8/8/2019 Dvd Next Copy Users Guide
1/89
DVD neXt COPY
Users GuideVersion 2
8/8/2019 Dvd Next Copy Users Guide
2/89
DVD neXt COPY V2.0 Users Guide
2
Table of Contents
1.0 Introduction...............................................................................................................31.1 Helpful Tips.....................................................................................................41.2 Limitations.......................................................................................................4
1.3 Support/Help Resources................................................................................... 41.4 Simple Mode Using 1 Drive............................................................................. 4
1.5 Simple Mode Using 2 Drives ...........................................................................41.6 Overview .........................................................................................................4
1.7 Quick Find....................................................................................................... 52.0 Installing and Activating Your Software.....................................................................6
2.1 Download and Installation ..................................................................................... 62.2 Activation............................................................................................................13
3.0 Third Party Plugins.................................................................................................144.0 Simple Mode............................................................................................................17
4.1 Single Layer 1 DVD Drive ..................................................................................174.2 Single Layer 2 DVD drives..................................................................................23
4.3 Dual Layer 1 DVD drive......................................................................................284.4 Dual Layer 2 DVD drives ....................................................................................34
5.0 Graphical User Interface (GUI) ..............................................................................395.1 Main Control Panel..............................................................................................39
5.2 Project Library/Burner Window........................................................................... 465.3 Settings Window ................................................................................................. 51
5.4 Manage Profiles Window.....................................................................................55
6.0 Advanced Operations ..............................................................................................586.1 Creating a Profile.................................................................................................586.2 Using a Profile.....................................................................................................63
6.3 Custom DVD.......................................................................................................676.4 Conversion to Project Library..............................................................................74
7.0 Terms ......................................................................................................................79
8/8/2019 Dvd Next Copy Users Guide
3/89
DVD neXt COPY V2.0 Users Guide
3
1.0 IntroductionDVD neXt COPY provides you the ability to backup your DVD movies ontoblank DVDs using a standard DVD +R or R burner or a DVD R(W) orDVD +/-RW Dual Layer discs. No more coasters or wasted blank discs.
Makes perfect backup copies of all your DVD movies. 100% satisfactionguaranteed or your money back.
DVD neXt COPY FEATURES:
COPY ALL your DVD moviesMAKE COPIES of your backup COPIESSAVE DVD movies to your ComputerMAKE MULTIPLE COPIES from movies on your hard driveBROWSE and VIEW DVD movies on your NETWORKCOPY EPISODIC DVD MoviesERASE and reuse rewritable disksREAD with one drive AND BURN with the otherPREVIEW tracks before and DURING copyingREMOVE region protectionSUPPORTS ALL Dual Layer and Single Layer disc and burnersCopy Special Features (Movie Trailers, Commentary, etc.)Copy Full Multi-Channel Audio (Dolby Digital 5.1, DTS)Copies DVD Movie to One Blank Disc (No Need to Split)Supports both NTSC and PAL DVD moviesSupports all SCSI, IDE, USB DVD burners/recorders on the marketSupports both home and PC DVD playersSupports 1x - 16x speed blank media24 hour Technical Support
Minimum System Requirements
Win 2000, XP. X64, VISTA
Pentium III 500 MHz10 GB of free hard drive space. A DVD Writer and media.
Recommended System Requirements
Win XP. X64, VISTAPentium 4 1.4GHz15 GB of free hard drive space.
A DVD Dual Layer Writer and media.
8/8/2019 Dvd Next Copy Users Guide
4/89
DVD neXt COPY V2.0 Users Guide
4
1.1 Helpful Tips
Turn off all active programs including anti-virus before you begin.
DVD neXt COPY can write to any media numerous times during agiven session.
If you have two DVD drives you can convert from one drive andburn with the other.
1.2 Limitations
Some programs may affect the burning cycle.
When using an external DVD burner, you should limit the number ofadditional external devices connected during the burning process.
1.3 Support/Help Resources
Regardless of where you purchased your software, DVD neXtCOPY offers FREE 24/7 technical support via one of the following:
DVD neXt COPY Help and SupportIf you are having problems using DVD neXt COPY, you will mostlikely be able to find the answers to your problems right on our
website. Please use our online RoboHelp and 24/7 ticket supportsystem. Click here
If you are unable to find your answer in our RoboHelp system,please submit a support ticket to our tech support team. All ticketssubmitted will be answered within 24 hours of the posting time.
1.4 Simple Mode Using 1 Drive
Flash demo of how to do a basic burn 1 drive. Click here
1.5 Simple Mode Using 2 Drives
Flash demo of how to do a basic burn. Click here
1.6 Overview
Flash demo walkthrough of all the features. Click here
http://www.dvdnextcopy.com/tutorials/OVERVIEW.htmlhttp://www.dvdnextcopy.com/tutorials/2DRIVES.htmlhttp://www.dvdnextcopy.com/tutorials/1DRIVE.htmlhttp://www.dvdnextcopy.com/support.html8/8/2019 Dvd Next Copy Users Guide
5/89
8/8/2019 Dvd Next Copy Users Guide
6/89
DVD neXt COPY V2.0 Users Guide
6
2.0 Installing and Activating Your Software
2.1 Download and Installation
Step 1: Click on the link in the download email you received afterpurchase. Then click on Save.
8/8/2019 Dvd Next Copy Users Guide
7/89
DVD neXt COPY V2.0 Users Guide
7
Then save the file to your hard drive.
8/8/2019 Dvd Next Copy Users Guide
8/89
DVD neXt COPY V2.0 Users Guide
8
Step 2: After saving the file you will see this window. Click on Run.
Click on Run again.
8/8/2019 Dvd Next Copy Users Guide
9/89
8/8/2019 Dvd Next Copy Users Guide
10/89
DVD neXt COPY V2.0 Users Guide
10
Step 5: Read the License Agreement and Click on I Agree. Please noteinstallation is limited to two of your own computers for each DVD nextCOPY license purchased.
8/8/2019 Dvd Next Copy Users Guide
11/89
DVD neXt COPY V2.0 Users Guide
11
Step 6: Select the installation directory and click Install. (The defaultdirectory is C:\Program Files\DVDneXtCOPY2).
8/8/2019 Dvd Next Copy Users Guide
12/89
DVD neXt COPY V2.0 Users Guide
12
Step 7: Click Finish. The installation is complete.
The first time you access DVD neXt COPY after an install or reinstall, you
will be required to activate your software online.
8/8/2019 Dvd Next Copy Users Guide
13/89
DVD neXt COPY V2.0 Users Guide
13
2.2 Activation
Step 1: Run DVD neXt COPY. Then enter your serial number.
On a Retail Copy (i.e., purchased from a store like Best Buy, etc) or anyother online reseller, the serial number is located on the inside of the casethe software came in. The serial number is located on a white sticker justbelow the disc.
On a downloaded copy of software (to include backup CD, box or USBversions) acquired directly from DVD neXt COPY, the license informationis in the confirmation email that was sent to the email address providedduring the purchase cycle.
You may copy and paste your serial number into the field. If you TYPE in
your serial number, you must use ALL CAPITALS. Use only the numberzero (0) and not the letter O. Click on Activate.
Note: If you have lost or misplaced your serial number, please go to ouronline support system and submit a support ticket with your purchaseinformation. Click here
http://www.dvdnextcopy.com/support.html8/8/2019 Dvd Next Copy Users Guide
14/89
DVD neXt COPY V2.0 Users Guide
14
3.0 Third Party Plugins
All third party plugins should be downloaded and SAVED to your hard
drive.
Step 1: Click on Save.
8/8/2019 Dvd Next Copy Users Guide
15/89
DVD neXt COPY V2.0 Users Guide
15
Step 2: Save to your hard drive
8/8/2019 Dvd Next Copy Users Guide
16/89
DVD neXt COPY V2.0 Users Guide
16
Step 3: You can then click on Run to install the third party plugins.
Step 4: Click on Run again and install the plugin.
Note: Make sure DVD neXt COPY is not running when you install anythird party plugins or they may not install properly.
8/8/2019 Dvd Next Copy Users Guide
17/89
DVD neXt COPY V2.0 Users Guide
17
4.0 Simple ModeThis is an overview of the simple operations using DVD neXt COPY. Noprior experience making DVD copies is required.
4.1 Single Layer 1 DVD Drive
The software default is set to copy the whole DVD movie disc with allspecial features, trailers, etc., to a single layer 4.7GB disc, using onesingle layer DVD burner. You do not need to change the settings in thismode. Insert the movie you wish to copy into the DVD burner. Run DVDneXt COPY by clicking on either the desktop icon or DVDneXtCOPY in theStart menu.
Step 1: Click on the New button.
8/8/2019 Dvd Next Copy Users Guide
18/89
DVD neXt COPY V2.0 Users Guide
18
Step 2: The New Project Window will open and automatically default tothe DVD drive with the movie in it. Click on Ok.
8/8/2019 Dvd Next Copy Users Guide
19/89
DVD neXt COPY V2.0 Users Guide
19
Step 3: Click on the blue start button and the conversion cycle will begin.
The movie will be converted to your hard drive.
Note: If you prefer to only copy the movie and not all the other specialfeatures, trailers, etc., click on Movie Only. (Custom DVD will bediscussed in our Advance Operations chapter).
8/8/2019 Dvd Next Copy Users Guide
20/89
DVD neXt COPY V2.0 Users Guide
20
The Main Control Panel will open showing 3 gauges in the dynamicwindow. These gauges show frames per second, the percent of the movie
converted to your hard drive and the size of the movie. You can alsopreview the movie while it is being converted to your hard drive.
8/8/2019 Dvd Next Copy Users Guide
21/89
DVD neXt COPY V2.0 Users Guide
21
Step 4: You will hear an audio alert and see this message when theconversion cycle is finished. Remove the DVD movie and insert a blank4.7GB DVD disc, then click on Retry.
8/8/2019 Dvd Next Copy Users Guide
22/89
DVD neXt COPY V2.0 Users Guide
22
The burning process will start. Progress will be shown by the Total Timeand color of the disc indicator. When the burn is complete, you will hearan audio alert. The disc indicator will be completely green and you willsee Burn Done in the events list.
8/8/2019 Dvd Next Copy Users Guide
23/89
DVD neXt COPY V2.0 Users Guide
23
4.2Single Layer 2 DVD drives
The software default is set to copy the whole DVD movie disc with all
special features, trailers, etc., to a single layer 4.7GB disc, using onesingle layer DVD burner. For two DVD drives you need to change a fewsettings.
Insert the movie you wish to copy into one DVD drive and a blank 4.7 GBdisc into your DVD burner. Run DVD neXt COPY by clicking on either thedesktop icon, orDVDneXtCOPY in the Start menu.
Step 1: Click on the New button.
8/8/2019 Dvd Next Copy Users Guide
24/89
DVD neXt COPY V2.0 Users Guide
24
Step 2: The New Project Window will open and automatically default tothe DVD drive with the movie in it. Check the Autostart Burning
Process box. Click on Ok.
8/8/2019 Dvd Next Copy Users Guide
25/89
DVD neXt COPY V2.0 Users Guide
25
Step 3: Click on the blue start button and the conversion cycle will begin.
The movie will be converted to your hard drive.
Note: If you prefer to only copy the movie and not all the other specialfeatures, trailers, etc., click on Movie Only. (Custom DVD will be
discussed in our Advance Operations Chapter).
8/8/2019 Dvd Next Copy Users Guide
26/89
DVD neXt COPY V2.0 Users Guide
26
The Main Control Panel will open showing 3 gauges in the dynamic
window. These gauges show frames per second, the percent of the movieconverted to your hard drive and the size of the movie. You can alsopreview the movie while it is being converted to your hard drive.
8/8/2019 Dvd Next Copy Users Guide
27/89
DVD neXt COPY V2.0 Users Guide
27
After the movie is completely converted to your hard drive, the burningprocess will automatically start. Progress will be shown by the Total Time
and color of the disc indicator. When the burn is complete, you will hearan audio alert. The disc indicator will be completely green and you willsee Burn Done in the events list.
8/8/2019 Dvd Next Copy Users Guide
28/89
DVD neXt COPY V2.0 Users Guide
28
4.3 Dual Layer 1 DVD drive
The software default is set to copy the whole DVD movie disc with allspecial features, trailers, etc., to a single layer 4.7GB disc, using one
single layer DVD burner. For dual layer you need to change a fewsettings.
Insert the movie you wish to copy into the DVD burner. Run DVD neXtCOPY by clicking on either the desktop icon orDVDneXtCOPY in the Startmenu.
Step 1: Click on the New button.
8/8/2019 Dvd Next Copy Users Guide
29/89
DVD neXt COPY V2.0 Users Guide
29
Step 2: The New Project Window will open and automatically default tothe DVD drive with the movie in it. Click on Target Size and select 8.5GBDUAL LAYER. Click on Ok.
8/8/2019 Dvd Next Copy Users Guide
30/89
DVD neXt COPY V2.0 Users Guide
30
Step 3: Click on the blue start button and the conversion cycle will begin.
The movie will be converted to your hard drive.
Note: If you prefer to only copy the movie and not all the other specialfeatures, trailers, etc., click on Movie Only. (Custom DVD will bediscussed in our Advance Operations Chapter).
8/8/2019 Dvd Next Copy Users Guide
31/89
DVD neXt COPY V2.0 Users Guide
31
The Main Control Panel will open showing 3 gauges in the dynamicwindow. These gauges show frames per second, the percent of the movieconverted to your hard drive and the size of the movie. You can alsopreview the movie while it is being converted to your hard drive.
8/8/2019 Dvd Next Copy Users Guide
32/89
DVD neXt COPY V2.0 Users Guide
32
Step 4: You will hear an audio alert and see this message when theconversion cycle is finished. Remove the DVD movie and insert a blank8.5GB dual layerDVD disc then click on Retry.
8/8/2019 Dvd Next Copy Users Guide
33/89
DVD neXt COPY V2.0 Users Guide
33
The burning cycle will start. Progress will be shown by the Total Timeand color of the disc indicator. When the burn is complete, you will hear
an audio alert. The disc indicator will be completely green and you willsee Burn Done in the events list.
8/8/2019 Dvd Next Copy Users Guide
34/89
DVD neXt COPY V2.0 Users Guide
34
4.4 Dual Layer 2 DVD drives
The software default is set to copy the whole DVD movie disc with all
special features, trailers, etc., to a single layer 4.7GB disc, using onesingle layer DVD burner. For dual layer and two DVD drives you need tochange a few settings.
Insert the movie you wish to copy into one DVD drive and a blank 8.5 GBdual layerDVD disc into yourdual layerDVD burner. Run DVD neXtCOPY by clicking on either the desktop icon, orDVDneXtCOPY in the Startmenu.
Step 1: Click on the New button.
8/8/2019 Dvd Next Copy Users Guide
35/89
DVD neXt COPY V2.0 Users Guide
35
Step 2: The New Project Window will open and automatically default tothe DVD drive with the movie in it. Check the Autostart BurningProcess box. Click on Target Size and select 8.5GB DUAL LAYER.
Click on Ok.
8/8/2019 Dvd Next Copy Users Guide
36/89
DVD neXt COPY V2.0 Users Guide
36
Step 3: Click on the blue start button and the conversion cycle will begin.
The movie will be converted to your hard drive.
Note: If you prefer to only copy the movie and not all the other specialfeatures, trailers, etc., click on Movie Only. (Custom DVD will bediscussed in our Advance Operations Chapter).
8/8/2019 Dvd Next Copy Users Guide
37/89
DVD neXt COPY V2.0 Users Guide
37
The Main Control Panel will open showing 3 gauges in the dynamicwindow. These gauges show frames per second, the percent of themovie converted to your hard drive and the size of the movie. You can
also preview the movie while it is being converted to your hard drive.
8/8/2019 Dvd Next Copy Users Guide
38/89
DVD neXt COPY V2.0 Users Guide
38
After the movie is completely converted to your hard drive, the burningprocess will automatically start. Progress will be show by the TotalTime and color of the disc indicator. When the burn is complete, you will
hear an audio alert. The disc indicator will be completely green and youwill see Burn Done in the events list.
8/8/2019 Dvd Next Copy Users Guide
39/89
DVD neXt COPY V2.0 Users Guide
39
5.0 Graphical User Interface (GUI)This is a brief overview of the various windows you will see when runningDVD neXt COPY. We also discuss each of the features you will find in
DVD neXt COPY. A more detailed description of how to use the softwarewill follow in our Advanced Operations Chapter.
5.1 Main Control Panel
The software opens in the Main Control Panel, which gives you accessto all the various Projects, Settings and Profiles. You can also start anew project from here. Since the software will default to copying theentire DVD movie disc, you also have the option to copy the Movie Onlyor create a Custom DVD by deselecting certain tracks and title sets.
8/8/2019 Dvd Next Copy Users Guide
40/89
DVD neXt COPY V2.0 Users Guide
40
If you are online when your run the software, the software will contactour website and ask if there is an update. The Main Control Panel Dynamic Window will then show you the current DVD neXt COPY
news and any information concerning the latest version and updates. Inthis example, the Dynamic Window is providing links to some flashtutorials.
8/8/2019 Dvd Next Copy Users Guide
41/89
DVD neXt COPY V2.0 Users Guide
41
Projects_Burn or delete a previous project on your hard drive. Add a new projectto your project library or browse for a DVD movie on your network. (Back)
Settings_
Change the default settings and select your DVD burner and preferredDVD burning speed. Select or deselect other various settings.(Back)
Profiles_
Select languages, set the Target Size and Quality, and choose toOverwrite Deposit Buffer. Remove Region Limitation and enable thePreview While Copy function. Click on OK and saved that profile.(Back)
About_Links to our Technical Support Department and our website.(Back)
8/8/2019 Dvd Next Copy Users Guide
42/89
DVD neXt COPY V2.0 Users Guide
42
Start_Starts the Conversion Cycle to copy the DVD movie from the disc to yourhard drive.(Back)
New_Start a new project by selecting the source and adjusting varioussettings.(Back)
Movie_OnlyCopies only the main movie and removes any trailers/special features.(Back)
Custom_DVDPreview and deselect Title Sets and Tracks. (Back)
8/8/2019 Dvd Next Copy Users Guide
43/89
DVD neXt COPY V2.0 Users Guide
43
Preview_Preview selected tracks in the Dynamic Window. (Back)
Scan_Scan fast forward and reverse while previewing. (Back)
Pause_Pause and Play the movie while previewing. (Back)
Slider_Use the Slider to move to any point in the movie while previewing. (Back)
8/8/2019 Dvd Next Copy Users Guide
44/89
DVD neXt COPY V2.0 Users Guide
44
Collapse_/ExpandCollapse and expand all Title Sets on the DVD movie disc to previewand select or deselect individual tracks. (Back)
Expand_Main Movie Only
Expands only the main movie Title Sets on the DVD movie disc topreview and select or deselect individual tracks. (Back)
Note:
Individual Title Sets may also be collapsed and expanded in theDynamic Window by clicking on the blue arrows in the right column.
8/8/2019 Dvd Next Copy Users Guide
45/89
DVD neXt COPY V2.0 Users Guide
45
Maximize_Content ListOpens a window with individual preview screens for each Title Set. (Back)
8/8/2019 Dvd Next Copy Users Guide
46/89
DVD neXt COPY V2.0 Users Guide
46
5.2 Project Library/Burner Window
This is where you can burn or delete a previous project that you havesaved to your Project Library on your hard drive. You may also add a new
project to your Project Library by clicking on Add and browsing for a DVDmovie on your hard drive or network.
8/8/2019 Dvd Next Copy Users Guide
47/89
DVD neXt COPY V2.0 Users Guide
47
Add_Opens the Add Project Window and allows to you to browse for a DVDmovie anywhere on your hard drive or network. Click OK to add theDVD movie to your Project Library. (Back)
Project_TypeYou may select a DVD Image (Video_Ts Folder), or an ISO DVD Image.(Back)
Project_NameEnter the name of your Project. (Back)
Project_Path
Browse for a DVD movie anywhere on your hard drive or network. (Back)
8/8/2019 Dvd Next Copy Users Guide
48/89
DVD neXt COPY V2.0 Users Guide
48
Selected_RecorderChoose the DVD burner you wish to use from the pull down. (Back)
Disc_Label
Label the name of your DVD movie. (Back)
More_LabelsCreate labels for ISO files. (Back)
Burning_SpeedSelect your burning speed to match the blank DVD media. (Back)
8/8/2019 Dvd Next Copy Users Guide
49/89
DVD neXt COPY V2.0 Users Guide
49
Eject_Disc_After Burn CompleteWhen the burning process is complete, the disc will be ejected. (Back)
Use_BurnProofInternal buffer to help prevent problems during the burning process. (Back)
Number_(No.) of CopiesSelect from 1-99 copies for this burn project. (Back)
Create_Video DVDVideo output will be in Video DVD format. (Back)
Create_ISO DVDVideo output will be in ISO DVD format. (Back)
8/8/2019 Dvd Next Copy Users Guide
50/89
DVD neXt COPY V2.0 Users Guide
50
Inserted_MediumShows the type of DVD medium in the selected burner. (No Mediumwhen a burnable disc is not in the burner). (Back)
Eject_
Ejects the selected recorder (burner). (Back)
Erase_RWErase rewriteable DVD discs. (Back)
Back_Back to the Project Library. (Back)
Burn_Start the burning process to the blank DVD disc. (Back)
8/8/2019 Dvd Next Copy Users Guide
51/89
DVD neXt COPY V2.0 Users Guide
51
5.3 Settings Window
If you wish to change the default settings, you can click on the settingstab. The Settings Window allows you to select your DVD burner as well
as your preferred DVD burning speed. You can choose to have the DVDEject after Burn and use Buffer Underrun Protection. You may alsodetermine the permanent and temporary locations on your hard drive thatyou choose to covert the DVD movie to.
There are other settings for disabling your screen saver, checking forupdates, showing tooltips when you mouse over a feature and selectingthe sounds you would like to hear at the completion of the conversioncycle and burning process. Selecting the GUI language will cause thesoftware to open in the selected language.
8/8/2019 Dvd Next Copy Users Guide
52/89
DVD neXt COPY V2.0 Users Guide
52
Select_DVD BurnerScan you computer for all DVD burners and select the one you wish touse for the burning project. (Back)
Burning_Speed_
Select your burning speed to match your burner and blank DVD media.(Back)
Eject_After BurnWhen the burning process is complete, the disc will be ejected. (Back)
Use_Buffer Underrun ProtectionHelps prevent any interruption between the source and the destinationwhen the burning process is taking place. (Back)
8/8/2019 Dvd Next Copy Users Guide
53/89
DVD neXt COPY V2.0 Users Guide
53
Project_LibrarySet the location of your project library on your computer. The softwarewill default to converting the movie to a temp file on your hard drive. Youmust deselect Burn After Convert, in the New Project Window toconvert a movie to your Project Library on your hard drive. (Back)
Temporary_PathSet the temporary directory where the files are to be temporarily storedon your hard drive. If you are making a copy of a DVD to DVD blankdisc, these files will be deleted after the burning process is complete.(Back)
8/8/2019 Dvd Next Copy Users Guide
54/89
DVD neXt COPY V2.0 Users Guide
54
Disable_ScreensaverDisable your screen saver to avoid any conflicts with the software. (Back)
Allow_DVDneXtCOPY to check for updatesThe software will check for any online updates. (Back)
Show_TooltipsYou will see tooltips when you mouse over a feature. (Back)
Play_sound if ReadySelect your preferred .wav file sound alerts when the Conversion Cycleand Burning Process are complete. (Back)
GUI_LanguageThe software will open in the selected language. (Back)
8/8/2019 Dvd Next Copy Users Guide
55/89
DVD neXt COPY V2.0 Users Guide
55
5.4 Manage Profiles Window
This window allows you to select audio and subtitle languages, set the
Target Size and Quality of the DVD movie to be burned. You may alsochoose to Overwrite Deposit Buffer, Remove Region Limitation or enablethe Preview While Copy function. You should experiment with varioussettings to see which works best with your particular system and discmedia.
Once you have selected all your preferences, you click on OK and theywill be saved to that profile. You will be presented with the option to selectany profile you have created when you click on NEW in the Main ControlPanel.
8/8/2019 Dvd Next Copy Users Guide
56/89
DVD neXt COPY V2.0 Users Guide
56
Select_ProfileSelect New to add a new profile or select the profile you would like tomodify. (Back)
Profile_NameEnter the name of your new profile. (Back)
Language_Pre-selection
Check your preferred audio and subtitle language. (Back)
Target_SizeDetermine the size of the video file that will be converted to your harddrive and burned to your blank single or dual layer DVD disc. Customallows you to set the maximum size of the file. (Back)
8/8/2019 Dvd Next Copy Users Guide
57/89
DVD neXt COPY V2.0 Users Guide
57
Quality_For single or dual layer, you can select any range between the fastestburn (Sharp- Fastest) or the best quality (Fluid-Slowest). (Back)
Overwrite_Deposit Buffer
Reserves 100-200 MB for the buffer to prevent DVD movies that havetrouble with recompression from creating errors. (Back)
Remove_Region Limitation
A Disc made in one region can be copied and played in another region.(Back)
Enable_Preview While Copy
Allows you to watch the movie as it is being converted to your hard drive.(Back)
8/8/2019 Dvd Next Copy Users Guide
58/89
DVD neXt COPY V2.0 Users Guide
58
6.0 Advanced OperationsThis is an overview of the various advanced operations found in DVD neXtCOPY that will greatly enhance your DVD copying experience. It is
suggested you read the Graphical User Interface Chapter first to fullyunderstand all the functions and features of the software.
6.1 Creating a Profile
The first profile you create should be the one you will be using most ofthe time, as you will be offered this profile as default each time youselect Use Profiles in the New Project Window.
Step 1. From the Main control panel, click on Profiles.
8/8/2019 Dvd Next Copy Users Guide
59/89
DVD neXt COPY V2.0 Users Guide
59
Step 2. Select New and type in the profile name.
8/8/2019 Dvd Next Copy Users Guide
60/89
DVD neXt COPY V2.0 Users Guide
60
Step 3. Select the Audio and Subtitle language you prefer.
8/8/2019 Dvd Next Copy Users Guide
61/89
DVD neXt COPY V2.0 Users Guide
61
Step 4. Select Target Size and Quality
8/8/2019 Dvd Next Copy Users Guide
62/89
DVD neXt COPY V2.0 Users Guide
62
Step 5. Choose to Overwrite Deposit Buffer, Remove Region Limitationor enable the Preview While Copy function. Click on Ok.
NOTE: Please allow 20 seconds while software configures this profile.When it has finished the Manage Profiles Window will close.
8/8/2019 Dvd Next Copy Users Guide
63/89
DVD neXt COPY V2.0 Users Guide
63
6.2 Using a Profile
You will be presented with the option to select any profile you havecreated when you click on NEW in the Main Control Panel.
Step 1. From the Main control panel, click on New.
8/8/2019 Dvd Next Copy Users Guide
64/89
DVD neXt COPY V2.0 Users Guide
64
Step 2. Check the Use Profiles box and select the profile you want to
use.
8/8/2019 Dvd Next Copy Users Guide
65/89
DVD neXt COPY V2.0 Users Guide
65
Step 3. Select your preferred Additional Settings and click OK.
8/8/2019 Dvd Next Copy Users Guide
66/89
DVD neXt COPY V2.0 Users Guide
66
Step 4. The conversion cycle and burning process will be in accordancewith the instructions in the profile you have selected.
8/8/2019 Dvd Next Copy Users Guide
67/89
DVD neXt COPY V2.0 Users Guide
67
6.3 Custom DVD
Clicking on Custom DVD during the conversion process will allow you topreview and deselect any Title Sets or Audio and Subtitle Tracks you do
not want to copy.
Insert the movie you wish to copy into the DVD burner. (If you are using 2drives, insert a blank DVD disc into your second burner).
Run DVD neXt COPY by clicking on either the desktop icon orDVDneXtCOPY in the Start menu.
Step 1: Click on the New button.
8/8/2019 Dvd Next Copy Users Guide
68/89
DVD neXt COPY V2.0 Users Guide
68
Step 2: The New Project Window will open and automatically default tothe DVD drive with the movie in it. If you are using two drives you shouldclick Autostart Burning Process. If you are using a dual layer burner
and disc, you should set Target Size to 8.5 GB. Click on Ok.
8/8/2019 Dvd Next Copy Users Guide
69/89
DVD neXt COPY V2.0 Users Guide
69
After clicking on ok, the Dynamic Window in the Main Control Panel willdisplay all the Title Sets in the Movie, with only the main movie expanded.In most cases, the main movie will be Video Title Set 1. But on discs withmany Title Sets it could be another Title Set. (You can also identify the
main movie by the size of the (MB).
Step 3: Click on Custom DVD.
8/8/2019 Dvd Next Copy Users Guide
70/89
DVD neXt COPY V2.0 Users Guide
70
This will set the copy mode to Custom DVD and expand all the Video TitleSets in the Dynamic Window. You may click on and preview selected
tracks in the Preview Window while scanning in fast forward or reverse.You may pause and play the movie or use the slider to move to any pointin the movie while previewing.
8/8/2019 Dvd Next Copy Users Guide
71/89
DVD neXt COPY V2.0 Users Guide
71
Individual Title Sets on the DVD movie disc may also be collapsed andexpanded in the Dynamic Window by clicking on the blue arrows in theright column.
You may also prefer to collapse or expand all Title Sets using the bluetriangle just below the right side of the Dynamic Window.
If you click on Maximize Content List this will open the Select DVDContent Window to full screen.
8/8/2019 Dvd Next Copy Users Guide
72/89
8/8/2019 Dvd Next Copy Users Guide
73/89
DVD neXt COPY V2.0 Users Guide
73
After deselecting unwanted Title Sets and Tracks, close the Select DVDContent Window.
Step 4: Click on the blue start button. The movie will be converted to
your hard drive and burned to your blank disc with your custom settings.
8/8/2019 Dvd Next Copy Users Guide
74/89
DVD neXt COPY V2.0 Users Guide
74
6.4 Conversion to Project Library
If you are making ONE copy of a DVD movie to a DVD blank disc, theDVD movie uploaded during the conversion cycle (writing to your harddrive) will be deleted after the burning process is complete. For multiple
copies, you need to convert the DVD movie to yourProject Library folderon your hard drive, which defaults to C:\DVDneXtCOPY\. (In the SettingsWindow, you can browse for any folder on your network and designate itas the location of your Project Library).
To convert a movie to your default Project Library:
Step 1: With the movie in your drive, click on New in the Master ControlPanel. This opens the New Project Window. Deselect Burn AfterConvert in Additional Settings and click on OK.
8/8/2019 Dvd Next Copy Users Guide
75/89
8/8/2019 Dvd Next Copy Users Guide
76/89
DVD neXt COPY V2.0 Users Guide
76
Step 2: Click on the blue start button and the conversion cycle will begin.The movie will be converted to yourProject Library on your hard drive.
Note: If you prefer to only copy the movie and not all the other specialfeatures, trailers, etc., click on Movie Only. (Please refer to section 6.3for making a Custom DVD).
8/8/2019 Dvd Next Copy Users Guide
77/89
DVD neXt COPY V2.0 Users Guide
77
The Main Control Panel will open showing 3 gauges in the dynamicwindow. These gauges show frames per second, the percent of the movieconverted to your hard drive and the size of the movie. You can alsopreview the movie while it is being converted to yourProject Library onyour hard drive.
8/8/2019 Dvd Next Copy Users Guide
78/89
DVD neXt COPY V2.0 Users Guide
78
Step 4: You will hear an audio alert and see this message when theconversion cycle is finished. The movie is now in yourProject Libraryand can be burned to a blank disc as many times as you like. It willremain in yourProject Library until you chose to delete it. (See thesection on Burning from your Project Library).
8/8/2019 Dvd Next Copy Users Guide
79/89
8/8/2019 Dvd Next Copy Users Guide
80/89
8/8/2019 Dvd Next Copy Users Guide
81/89
8/8/2019 Dvd Next Copy Users Guide
82/89
DVD neXt COPY V2.0 Users Guide
82
Directory The term directory refers to the address of afile of group of files on your hard drive orremovable media.
Direct X A set of multi-media programming interfacesfrom Microsoft fro Windows.
Disc A direct access storage device such asfloppy disc, hard disc, magnetic disc, opticaldisc, CD-ROM and DVD.
Dolby AC3 Dolby Audio Coding 3 the audio codingtechnology used in Dolby digital.
Dolby Digital A digital audio encoding system from Dolbyused in movie & home theatres.
DV Digital Video video captured to a computerfrom a digital camcorder.
DVD The term DVD officially doesnt stand foranything, although it is often said to standfor Digital Versatile Disc or Digital VideoDisc. DVDs are a 3 or 6 inch discs capableof storing 2.2, 4.7, 8.5 9.4 or 17 gigabytes of
data.
DVD-RAM Alternative competing format of record-oncetype discs with 2.4 GB storage capacity perside.
DVD-ROM DVD-Rom does not contain Video_TS andAudio_TS directories and therefore cannotread by a consumer DVD player. DVD-ROMs typically are used to store data muchin a way a CD_ROM is used today.
DVD-R/DVD+RW Alternative competing format of record-oncetype (DVD+R) or re-recordable type(DVD+RW) discs with 4.7 GB storagecapacity per side.
E
Episodic Discs These are TV Series discs that have
8/8/2019 Dvd Next Copy Users Guide
83/89
8/8/2019 Dvd Next Copy Users Guide
84/89
DVD neXt COPY V2.0 Users Guide
84
HFS+ Allows longer file names (256) charactersand supports Unicode.
IImage A single file containing all edited data on a
CD.
IFO Publishing information about the content ofthis file would be contrary to the licenseagreement and non-disclosure agreementwith the DVD forum.
.INI A file containing configuration informationfor Windows. Some applications have their
own .ini files which hold programinformation.
.ISO A CD image format similar to a BIN/CUEimage file set, but the one single .ISO filecontains both the data and the CD layoutinformation.
ISRC International Standard Recording Code
ISO-9960 An international logical file format for CD-
ROMs originally developed by the HighSierra Group. All data on a CD isaddressed using logical block numbers
JJoliet A logical file format created by Microsoft
Corporation which conforms to ISO-9960format. This format allows long file names(up to 64 characters) and uses the Unicodeinternational character set.
JPEG Joint Photographic Experts Group astandard for compressing still images.
KKilobytes 1 thousand bytes or 1,024 bytes in technical
specs.
8/8/2019 Dvd Next Copy Users Guide
85/89
DVD neXt COPY V2.0 Users Guide
85
LLBN Logical Block Number. See Block
Lead-in The first part of a CD-R recording session.The Table of Contents is converted into thelead-in when the session is closed.
Lead-out The ending area for each session where theindex to the next session is stored. Writingthe lead-out closes the session.
License Number A number provided to a specific copy of thesoftware used to identify the end user whopurchased the product.
MMCN Media Catalog number
Media Video and audio used in the creation of aDVD
Mode 1 The original ordering of control informationin the sector header. Most basic form read
by all CD devices.
Mode 2 (XA) extended architecture that allowsdefinitions of sub-types within the data byusing an additional 8 bytes in the sectorheader. This was moved from the back endof the sector to the front to allow for this.
MPEG A video compression system developed bythe Motion Picture Experts Group. Thereare currently two types in use: MPEG-1 and
MPEG-2.
MPEG-1 Achieves approximately the resolution ofbroadcast TV and is slow fro processinghigh quality moving images.
MPEG-2 The super high quality video technique used
8/8/2019 Dvd Next Copy Users Guide
86/89
DVD neXt COPY V2.0 Users Guide
86
for DBS (satellite TV), DHTV and DVD.
MPEG-4 A transport-agnostic multi-mediarepresentation technology developed as anexpansion on the MPEG-2 standard.
MSF Minute Second Frame addressing, usedwith both data and audio tracks. This is analternate addressing form for CD.
N
OOptical Media A direct access media converted and read
by light.
PPacket Writing A technique of writing to a CD-R or CD-RW
disc which allows small increments of datato be added to the disc. This is used bynearly all drag-and-drop type CD burningsoftware. See UDF.
PCM Pulse Code Modulation- an uncompressed,digitally codes representation of an analogsignal.
Preferences Options in a program that can be changedby the user. They usually control the userinterface letting the user customize the waythey view data.
Publishers Name Identifies the name of the CDs publisher
Q
Quick Erased disc CD/RW discs can be erased quickly takingless than 5 minutes. However, the originalinformation is present on the disc but it
cannot be read by consumer drives. Theinformation on the disc can only berecovered using special hardware.
R
8/8/2019 Dvd Next Copy Users Guide
87/89
DVD neXt COPY V2.0 Users Guide
87
Region coding A standard based upon country that thetechnology is available in.
SSCSI Small Computer System Interface, An
interface allowing you to connect media
devices to your computer.
Sector The smallest unit of information on a CDthat can be addressed. Also referred to asa block. A sector may contain a header,synchronization bits and user data.Different types of CDs contain differentsector sizes. A data CD-ROM contains asector size of 2048 bytes of data.
Settings User defined choices that can be set as
their default.
Soft errors Errors that the software can normallyrecover from.
Sub-q Data A hex hump containing current position datafor the track, UPC code for the track, currentminutes and seconds time into the track andISRC.
SVCD Super Video Compact Disc a movie on anSVCD is the same quality as a VHS tape.
System Name The name of the operating system runningthe application.
T
TDF Title Definition Format
Text Editor Software used to create and edit files that
contain only text.Third Party Plugins Any 3rd party plugin applications, such as a
Graphical User Interface (GUI), that are notpart of the DVD neXt Copy program.
8/8/2019 Dvd Next Copy Users Guide
88/89
8/8/2019 Dvd Next Copy Users Guide
89/89