Dvd Converter - Manual - Uk

8/2/2019 Dvd Converter - Manual - Uk

1/19

BlueTinum DVD Converter with TV Tuner

BT-TTU305 V2.0

User Manual

Content

1. Brief Introduction

2. Hardware Installation

3. Software & Driver Installation

4. TV Plus 3.0 Instruction5. MPEG Encoder Software Instruction

6. Video Editor Software Instruction

7. Burn DVD Software Instruction

1. Brief Introduction

1.1. Product Introduction

With USB2.0 outlet/full append channel receive

The device adopts USB2.0 interface which can offer the biggest data of 480 Mbps, keep the

figure in high resolution, pushing the quality of figure.

The device with internal full implement tuner, don't miss any channel and have quick search,

then store at most 250 channels.

TV Plus 3.0 Application

New TV Plus 3.0 with strong function and using much conveniently. The function is as

follows:

1. Watch and record TV program.

2. Convert the DV/AVI into MPEG/DVD format.

3. Edit the MPEG/DVD file, with create your own video file.4. Burn the recording program into your own VCD/SVCD/DVD.

Collect the high definition figure

The device can raise common analog signal to the professional signal of high definition. There

are four kinds of dynamic adjustment to keep the definition of receiving figure (dynamic

balance/dynamic chroma/dynamic brightness/dynamic GAMMA adjustment). Through advanced

digital video strain wave, eliminate TV signal efficiently voluntarily in chirp, bring to you

unprecedented is high distinct, move to be, the brand-new feeling of fashion.

Time shift, make an appointment to record system

When you are enjoying the TV program, because of having things to deal with to leavecomputer temporarily, you only activate the time shift function, the TV program will auto- pause

and record it as your demand. Don't miss any wonderful program.


2/19

The device with the pre-recording function, you can set the start time of recording/time

length/video source passageway, let you enjoy your favorite program at any time.

Compress the VIDEO/AUDIO synchronously

The device adopt advanced audio chip, don't confuse the audio and video, avoid showing out

the synchronous phenomenon.

With the AV/S-VIDEO input interface

The device equip with the AV/S-VIDEO input interface, it can receive the PAL/NTSC signal,

and have function of operate the all kinds of external equipment (DVD/VCD/camera), realize

watching compress recording video program, build up a Mini home cinema.

1.2. Product Function

With USB2.0 interface and external-design;

Suitable for the laptop(with USB2.0 outlet);

Receive the full append TV program;

Support the internal USB AUDIO (option);Full function remote controller;

Auto-search TV program and storage about 250 channels;

Adjust the size of figure, the resolution is up to 720*576;

Compress the TV program into the format (MPEG1/2/4);

Pre-record the TV program as your demand;

Pre-browse the multi-figure at the same time;

OSD function (display the channel no. / volume);

Capture the high quality figure;

Compatible with Windows2000/XP;

Time shift function;

1.3. Product Usage

Watch/record/edit your favorite program;

Internet Video meeting/internet video-phone;

Make audio & video email;

PC Photo/E-photo;

Record and edit cartoon;

Make VCD/DVD;

Make the short advertisement/card ... ;

Design and edit a wonderful Short;

1.4. Technology Specification

Channel parameter: DS1-57CH Z1-38CH (48-870MHZ full cable TV program)

Memory: 250

RF: 75

Power consumption: 5W

1.5. PC System Requirement

Operation system: Windows 2000 SP4 or Windows XP SP2Video Card: Support the DirectX8.0 or the advanced AGP video card

CPU: Pentium41.8G and the above, if recording, suggest to adopt the


3/19

Pentium42.4G or Xunchi 1.4 G

Memory: 256M

Hardware: Software installation space (100MB), recording storage space (1GB),

including recording time and compress format. Hardware require 5400

turns or the above

Audio Card: Common audio card

Others: USB2.0 interface or USB2.0 interface extended card (necessary)

1.6. Packing Content

USB2.0 TV BOX: 1 set

Software disc: 1 piece

Remote controller: 1 piece

USB2.0 connection line: 1 piece

Stereo audio line: 1 piece

Battery: 1 pair

Manual: 1 copy

2. Hardware Installation

2.1. Diagram And Instruction Of Front Panel

2.2. Diagram And Instruction Of Rear Panel

Antenna jack: Antenna interface, suitable for the cable/wireless antenna.

USB jack: USB2.0 outlet, connect to the USB interface of PC/laptop.

S-VIDEO jack: S-Video input interface, it can connect to s-video output of

camera/VCD/DVD.

Video in jack: Video input interface, it can connect to video output of camera/DVD/VCD.

Audio L/R jack: Audio input interface (left/right), it can connect to the audio output of

camera/ VCD/DVD.

Audio out jack: Audio output interface, it will connect to sound card or Audio in interface;

When line to laptop, please use the Microphone jack.


4/19

2.3. Diagram And Instruction Of remote Controller

: Open/close the program;

: Open/close the voice;

0--9: Numeral button, select the channel by it;

ZOOM: Extend/reduce the window;

: Switch program between the previous program and the current program;

PLAY: Display the current operation;

STOP: Stop the collection and display;RECORD: Record your favorite program;

PA USE: Pause the previous program;

AV/TV: Exchange the video source (TV/AV/S-VIDEO);

CH+/-: Exchange the channel;

VOL+/-: Adjust the volume;

MAXIMIZE: Watch the TV program in full screen;

MINIMIZE: Minimize window of TV program;

TIMESHIFT: Time shift, recording the TV program when you leave for other things;

SNAPSHOT: Capture the current video figure and store into PC;

SURFING: Pre-browse multi TV program at the same time;SCAN: Auto-search TV program;

PREV: Back to the last section;

NEXT: Get to the next section;

3. Software & Driver Installation

Note: For keep the figure in the best quality, suggest adopting the Windows XP operation

system.

DO NOT CONNECT YOUR USB CABLE TO THE PC BEFORE SOFTWARE AND

DRIVERS ARE CORRECTLY INSTALLED!!!


5/19

Insert CD-Rom and browse to the files on the CD:

Run setup.exe and follow instructions on screen.

When this screen shows answer Yes an d continue to License agreement.


6/19

Answer Yes to license agreement.

Drivers will now automatically start to install.

USB Audio Driver is necessary, others is based on the local TV system, for example:

1. PAL DK, please choose ,

2. PAL B/G, please choose ;

3. NTSC, please choose Then press Next:

Press Next:


7/19

Pop up the windows of Software Installation:

Press Continue Anyway if this screen shows, then finish installation, please press Finish:


8/19

Reboot if asked.

Insert your USB cable to your computer and New hardware should be found. Choose to install

automatically. Install USB Video 2821 and USB EMP Audio device. When drivers are installed you

are ready to use your box and software.

4. TV Plus 3.0 Instruction

There are four method starting the application of TV Plus 3.0:

1. Double click Windows desk's TV Plus 3.0 icon.

2. From Start > Programs > honestech > TV Plus 3.0 > TV Plus 3.0.

3. Double the tray icon, directly enter into TVR interface.

4. Press the power key of remote, can directly enter into the TVR interface.

First time the program is started please enter product key.


9/19

Please enter the code of the software disc, then enter into the main menu of TV Plus 3.0:

Note: please keep the code, (it can use in the next installation or upgrade.).

Please refer to TV Plus 3.0 help file for detailed information.

Below is the meaning of control panel and parts icon of TV Plus 3.0:

1. TVR: receive and record the tv programs;

2. MPEG Encoder: editing image file;

3. Video Editor: editing the photo and documents;

4. Brun DVD: DVD carving machine;

5. Media Files Selector: select the type of media file;

6. Media Files Explorer: media file IE, can be used to browse and choose the file need to

editor choose the file you want to editor; Double, then can open the relevant format file editor.

Now, we click the icon of TVR and the enter into the interface of receiving, seeing and

recording the TV programs when popping the control panel and play window of TVR in the desk.

The control panel as below:


10/19

Below is information of introducing the function of common used keys:1. Operate in order: minimum, close and open the help file;

2. Change the channel front, skip to another channel;

3. Showing of the channel;

4. Change the channel back, back skip to another channel;

5. Input the number key,+ key can increase the number of channel into the channel list.-

key can reduce the number channel out of channel list;

6. Recording, start to record the signals of picture and code the predetermined format;

7. See when record, open the parallel moving function of time, the buffering time is relevant

to your location you move;

8. The down key of control panel, be used to open the pull-down window of image file;

9. Editor the image file you choose;

10. Make the image file you choose send as email attach;

11. Change the ways of checking image file;

12. Up key in the pull-up IE window, used to close the pull-up IE window;

13. The progress bar of play of image file and moving of time;

14. Play key-press of image file: play/pause/stop/last/next;

15. Timing the recording set, click and then open the timing video setting list;

16. Function setting, click and open the attribute page of function setting;

17. Scan the channel, click then scan the channel;

18. Change the color of control panel of TVR, clicking it only can change the color of

control panel of TVR;19. Size the static picture;

20. Can browse multi-channel programs;


11/19

21. Choose the model of sound;

22. Indicating the volume state;

23. Mute key;

24. Volume + key;

25. Volume - key;

26. Showing of volume;

Below we can learn the attribute page setting of function setting, click can open the

attribute page of function setting. Picture as below, let us explanation of setting of all partes:

The first page: TV Setting

1. Category: choice of source of TV, you can choose the TV wireless channel and CATV wire

channel;

2. Country: country setting, relevant to TV channel;

3. Increase and delete channel:

3.1. Minimum/maximum: showing the numbers of TV channel which can be searched;

3.2. Number key: manually input the number of channel, firstly click the digital keys, then

click the enter key;3.3. Add key can add the number of left channel into the right channel list, delete key

can delete he choose channel in the right channel list,automatic scan re-search the TV channel;

3.4. Current channel list box

Afterwards, click automatic scan, then start to search the TV channel, if having TV signals,

will quickly popping the dialog box as below:


12/19

This dialog box inquire you if increase the channel you have searched, please click yes to all,

continue searching. after searching, popping the confirming dialog box, please click confirm.

The second page: video setting:

1. Fine Adjustment: Adjust Brightness/Contrast/Hue/Saturation as your favorite, if you don't

satisfy with the setting, please click Default;

2. Video catch device: choose the video catch installation, please choose USB 282x Video;3. Video Source: can open Windows video setting Property page, not adjust normally;

4. Mixer device: can choose sound device of the input of audio (sound card) and the channel

of input of sound, not choose normally;

5. Audio input: open Property page of volume control in Windows;

The three page: Record Setting:


13/19

1. Profile: Select the recording format of video files;

2. Recording quality adjustment: Adjust the quality /frame rate/encoding speed of video as

your PC system;

3. Working directory: Saving path of video, input and click browse to select the folder;

The four page Etc Dialog

1. Channel Surfing: can choose the time of the preview of split-screennumbers of preview

channel use to choose the numbers of showing picture in the one windows in the preview of

split-screen;2. TimeShift Recording: After TimeShift recording. Don't save the temp file;

3. DeInterlace filter: While rendering, Don't use a deInterlace filter;


14/19

4. Disk Driver Info: list box of hardware information;

Following let us introduce the setting of Schedule Recording Setting, click open the list

as follows:

Function of main keys as follow:

1. Click Add, set the new task of schedule recording;

2. Click Delete, re-set new task of schedule recording;

3. Click Delete all, delete all the task of schedule recording;

4. Click OK, confirm and quit the setting;

5. Click Cancel, quit the video setting widow;

Now click setting, open schedule item as follow:


15/19

1. The source of input: Setting of recording signal;

2. Channel: When recording the TV, set the number of channel;3. Every day: Mode of recording time;

4. Model: Schedule recording and time see (not recording when see);

5. Start time: The start time of current of recording;

6. How long: The time length of effecting the current recording;

7. After schedule recording: Start to setting the work after finished the current recording, can

carry our record with no control;

After finishing, click Setting key add into the schedule recording list, quit Schedule item

window. And finish the setting of recording.

5. MPEG Encoder Instruction

When you press TVR PLUS button , MPEG Encoder will be activate, the panel is as

follows:


16/19

Header Buttons (from left to right): Add input files; Delete files; Edit options; Start and Stop

transcoding.

Batch Process Display Window: Displays file name, encoding status, screen size and play time

of files to be transcoded.

Progress Display Window : Displays formatting information about the file being transcoded.

Preview Display Window : Displays the video of the file being transcoded.

The button function:

1. Add: Add file(s) to be transcoded. Button initiates browse/selection dialog;

2. Delete: Highlight and delete selected file in Batch Process Display window;

3. Edit: Customize encoding options for selected file in Process Display window;4. Encoding: Initiates transcoding of all files displayed as Waiting in status column in

Process Display window. (Note: This button changes to Stop during the transcoding process.);

5. Stop: Terminates batch transcoding process;

6. Help: Launches help file;

7. Maximize: Maximizes Encoder 5.0 interface;

8. Minimize: Minimizes Encoder 5.0 interface;

9. Color: Change color of program interface;

10. Exit: Ends Encoder 5.0 program;

11. Batch Process Display Window;

12. Progress Display Window. The Progress Display Window provides three reports:

a. While Encoder 5.0 is loading, activity related to that process is displayed; b. Once a video file is added to the Batch Process Display Window, technical

specifications about the file are listed;

c. During the transcoding process, technical specifications about the output file are

displayed;

13. Preview Display Window;

Note: If you want to get the help (MPEG Encoder), please press the icon of control panel,

or check the help files.

6. Video Editor Software Instruction


17/19

When you press TVR PLUS button , the Video Editor will be activate, the panel is as

follows:

The function instruction is as follows:

1. Menu area: file open, file/video clip delete, video property, change skin color, minimize,

maximize, close and help;

2. Original clips and staging clips area;

3. Play original video clips, play edited video clips (preview), display saving progress

information;

4. Place video files section;

Function instruction:

Frame edit area: Mark frame range, sequence arrangement, merge multiple frames into one

video;Title edit area: Add title, font style, size, color, movement (straight line, curve line);

Audio edit area: Add audio and create sound effect;

Special effect edit area: Strengthen color effect/filter effect/transition effect/transition in

effect/transition out effect/Noise Reduction Filter;

Note: If you want to get the help (Video Editor), please press the icon of control panel, or

check the help files.

7. Burn DVD Software Instruction

When you press TVR PLUS button , the Burn DVD will be activate, then pop up the


18/19

windows:

There are four formats for your choice: DVD/VCD/SVCD/Multimedia data:

1. You can store/open and initiate the program;

2. When making the DVD/CD, there are two button removing the figure;

The special button function is as follows:

3. Hide and show the operate windows of Burn DVD;

4. Exit the DVD/CD disc;

5. Clear up the content of multimedia DVD/CD;

6. Open the dialog box;


19/19

6.1. Video standard: Choose your video standard;

6.2. Audio standard: Choose your audio format (Default: Keep the original file. LPCM:Change into the LPCM audio format);

6.3. Setting: Making the compatible MPEG files, change the video into your choosing format

and save into the PC;

Set up menu: If you haven't choose the menu, the menu won't auto-set up, the video will

go on displaying;

Create UDF files: If don't recognize the burn recording device when you burning the

DVD, or you can't burn the DVD by the device, please create a UDF image, then try other

application software to burn the files into the DVD, support the SVCD and XSVD (but won't check

the rate);

6.4. Burning option: making a Burning test before operation, write the data into the checking

before DVD/CD Burning, check whether the function is normal;6.5. Output files: Save media, the video will save into CD or DVD when you choose the

option;

6.6. Path: You can choose your favorite interim files;

Note: If you want to get the help (Burn DVD), please press the icon of control panel, or

check the help files.

Documents

Dvd Converter - Manual - Uk