ENGINEMake CumminsBTAA3.3-C80

Type Tier3Certified Turbocharged/Chargeair-cooled

Ratedhorsepower 80hp(60kW) @2100rpm

Fuelconsumption 0.9gal/hr (3.5L/hr)

ELECTRICAL

Voltage 12Volts

Batteries 1x12-volt

AMPhour 100

Coldcrankingamps 640

STEERING

Steeringtype Gearpump

Cylinders 1

Steeringangle(+/-) 34°

Oscillation(+/-) 8°

Insideturningradius 15.1ft(4.6m)

Crabmode(+/-) 7.0in(180mm)

WEIGHT

Operatingweight 16,226lbs(7360kg)

Frontdrumweight 8,267lbs(3750kg)

Reardrumweight 7,959lbs(3610kg)

Frontdrumlinearload 145lb/in (25.9kg/cm)

Reardrumlinearload 139lb/in (24.9kg/cm)

Drumshavetaperededge

TRAVEL

Drive Hydrostatic

Variabledisplacementaxialpistontypedrumdrivepump 1

Hydraulicfixeddisplacementdrumdrivemotors 2

Drivebrake Hydrostatic

Emergencybrake Multi-disc

Parkingbrake Multi-disc

Maximumworkingspeed 7.1mph (11.4km/hr)

Maximumtravelspeed 7.1mph (11.4km/hr)

Gradeability(vibrationon) 20°

Gradeability(vibrationoff) 30°

Curbclearance 29.8in(755mm)

VIBRATION

Hydrauliccircuittype Closedcenter

Pumptype Gear

Fixeddisplacementhydraulicmotor 2

Vibration Eccentric

FrequencyLow 2580vpm(43Hz)High 3120vpm(52Hz)

AmplitudeLow 0.013in(0.33mm)High 0.024in(0.6mm)

CentrifugalforceLow 12,365lbs(48kN)High 14,613lbs(65kN)

ISOLATION DRuM MOuNTS

NumbersofisolationFrontleft(drivemotorside) 6Frontright(vibratingmotorside) 4Rearright(drivemotorside) 4Rearleft(vibratingmotorside) 6

PRESSuRIZED WATERING SYSTEM

Frontwatertank 172gal(650L)

Waterfiltrationstages 3

Wateringpumps 2

Tanktype Polyethelyne

Watertanklevel LEDindicator

CAPACITIES

Fueltank 29gal(110L)

Engineoil 1.7gal(6.5L)

Hydraulicreservoir 10.6gal(40L)

Vibrationsystem(each) 0.48gal(1.8L)

OPERATORS COMPARTMENT

Heavydutyisolationmountsinsulatedfromthechassis,handrail,instrumentpanelwithanti-vandalcovers,exceptionalfront /rearvisbility.ROPSprotection,single-leverspeedanddirectioncontrolwithvibrationon/offcontrol,multi-positionseating,adjustablesteeringwheel,speedselector,dual-modevibratorysystem,side-mountmirrors(leftandright).

MAXIMuM COMPACTED LIFT THICKNESS

Sand/gravel 11.8in(300mm)

Mixedsoils 7.9in(200mm)

Asphalt 4.7in(120mm)

STANDARD EquIPMENT

FixedROPSOpenPlatformwithhandrailsAnti-vandalcoverHalogenworklightsx4(55watt / frontandrear)Turnsignalindicator(leftandright)HydrostaticdriveforbothdrumsDualvibrationFront/dual / reardrumvibrationcontrolAutovibrationstopswitchinneutralArticulatedchassisHydraulicoilcoolerBackupalarmRetractableseatbelt– 2in(51mm)LateralshiftingsuspensionseatwithfoldablearmsPressurizedwatersystemMachinedtapereddrumedgesWaterfiltration– 3stageMasterdisconnectswitchHornHourmeterEmergencystopbuttonLiftandtiedownprovision– 4-pointWateringsystemdrainsElectricfuseprotectionSteeringwheelspinnerknobSpin-onfuel,engineoilandhydraulicfiltersToolboxVerticallifthoodIndicatorlights:

BatteryEngineoilpressureIntakepreheaterEnginetemperatureParkingbrakeVibrationON/OFFSprinklersystemON/OFF

OPTIONAL EquIPMENT

Highfrequencyvibration(2880vpm– 48Hz/3720vpm– 62Hz)

RotatingbeaconFrontandrearworklights (ROPSorcabmounted)CabwithheatandairconditioningEdgecutterRadioready (noradio/ twospeakersandantenna)TiltablescrapersPage1of2

DV207 VIBRATORY ROLLERTIER 3 CERTIFIED

DIMENSIONSA. Wheelbase 128.4in(3260mm)

B. Drumdiameter 45.3in(1150mm)

C. Groundclearance 9.5in(240mm)

D. Curbclearance 29.8in(755mm)

E. Overallheight 116.1in(2950mm)

F. Seatheight 90.6in(2300mm)

G. Overalllength 174in(4410mm)

H. Drumwidth 57in(1450mm)

I. Overallwidth 60.6in(1540mm)

J. Drumthickness 0.6in(15mm)

FormNo.CCE201202DV207 PrintedinU.S.A. ©2012CNHAmericaLLCReplacesNo.CCE201102DV207 AllRightsReserved

NOTE:AllspecificationsarestatedinaccordancewithSAEStandardsorRecommendedPractices,whereapplicable.NOTE:AllenginesmeetcurrentEPAemissionsrequirements.IMPORTANT:CaseConstructionEquipmentInc.reservestherighttochangethesespecificationswithoutnoticeandwithoutincurringanyobligationrelatingtosuchchange.CaseConstructionEquipmentInc.doesnotwarrantthesafetyorreliabilityofattachmentsfromothermanufacturers.CaseisaregisteredtrademarkofCNHAmericaLLC.Anytrademarksreferredtoherein,inassociationwithgoodsand/orservicesofcompaniesotherthanCNHAmericaLLC,arethepropertyofthoserespectivecompanies.

www.casece.com

AllCaseconstructionequipmentisbiodieselready.

A

B

E

C

G

D

F

J

H

I

DV SERIES COMPACTIONDV207 I DV210 I DV213

A new standard for better built roadsThe Case DV Series large asphalt compactors establish a new industry standard for performance, productivity and reliability. The exclusive Case Dual Drum Drive – standard on all large Case DV asphalt models – includes direct-drive independent pumps for each drum, delivering 100-percent traction effi ciency and eliminating slippage on the compacted surface.

A versatile line-up for production asphalt applicationsCase DV Series compactors deliver dual amplitudes, dual frequencies and centrifugal forces to meet the needs of any application, from coarse bases to hot-mix asphalt (HMA) surfaces. Independent control of drum vibration (front, rear or both drums), provides the bestpossible compaction productivity and performance.

Smooth control for consistent resultsProductive, effi cient paving requires a compactor that createsa smooth surface the fi rst time, every time. Case DV Series large compactors provide automatic vibration control (tapered start and stop), ensuring a smooth, consistent surface by preventing directional change and stopping damage. The Case vibratory system automatically starts when the drive lever is moved from neutral and stops when the leveris repositioned back into neutral.

Taking care of the operatorCase designed the rear-mounted power train on the DV Series compactors to achieve lower noise, vibration and heat for theoperator. The result is the industry’s best work platform for all-day operations. Operators will also appreciate the ergonomic, common-sense, layout of the operator’s station, superior visibility to the drumand water nozzels.

Easy, effi cient maintenanceThe DV Series asphalt compactors continue the Case traditionfor easy maintenance and serviceability. The compactors offer a one-piece vertical-lift hood for easy, ground-level, obstruction-free access to daily maintenance checkpoints. Compare the Case machines to competitive models that require removal of the water tank to servicethe engine. All drive components are easily accessible on the large Case DV Series asphalt models, minimizing maintenance time andmaximizing productivity.

DV207

DV SERIES COMPACTIONDV207 I DV210 I DV213

DV210 DV213

Multi-position operator station The rotating operator’s station and swivel seat provides 180 degrees of operator positioning for full view of the compacted surface and drums.

Optional asphalt cutter wheelAn asphalt cutter wheel makes asphalt cutting easier and more economical. The replaceable cutting wheel is made with heat treated, abrasive resistant alloy steel.

Superior cab comfort Case DV cabs are ISO-mounted for maximum operator comfort. An optional cab with air conditioning and heat is available on all models.

DV SERIES COMPACTIONDV207 I DV210 I DV213

Dual Volcolon scrapersEach drum is equipped with dual, adjustable, Volcolon drum scrapers for maintaining the drum surface and ensuring consistent compaction results.

InstrumentationOperator productivity is maximized by conveniently located and grouped switches and gauges. The multi-function display monitor allows the operator to easily access key operating information.

Isolation-mountoperator’s platformThe operator can stay focusedon the job, thanks to the vibration-dampening isolation-mountwork platform.

Heavy duty articulation jointDV Series machines are built to last, with durability features like the heavy duty articulation joint.

Superior centrifugalforce valuesThe centrifugal force generated bythe DV Series dual vibrating drums results in a consistent, smooth pavement surface.

Jobsite illuminationStandard front and rear halogen lights powerfully illuminate the job site night or day for continued high productivity.

Dual spray bar(Front and Rear)The DV Series compactors feature a high capacity, corrosion proof, triple fi ltration water system with easily serviceable spray nozzles. Standard equipment includes primary and back-up water pumps to ensure uninterrupted production.

Dual fi ll port water tankHigh capacity, corrosion proof water tanks feature dual fi ll ports with integrated fi ltration for quick, easy and safe water servicing. The polyethelyne water tanks are protected by the frame of the machine and feature an easily accessible drain port.

DV SERIES COMPACTIONDV207 I DV210 I DV213

Productivity for your big paving jobsThe large Case DV Series asphalt compactors are big enough and tough enough for the largest road-paving projects. With drums up to 82.7 in. (2100 mm) wide and 53.1 in. (1350 mm) in diameter, the DV Series machines deliver the productivity you need.

The combination of fuel-effi cient Cummins diesel engines and 55-gallon fuel tanks keep your DV Series compactor on the job for up to 20 hours between fuel refi lls. Standard halogen front and rear lights illuminate your job site, keeping your crews productive at any time of the night or day.

Hydrostatic drive is standard for both vibrating drums. The articulated frame results in a tight turning radius for working in confi ned areas. An optional edge cutter provides an important productivity benefi t.

Comfortable operating environmentboosts productivityWe know a comfortable operator is more productive. That’s why the DV Series operator’s platform provides best-in-class comfort and visibility. For all-weather operation, Case offers an optional heated and air-conditioned cab. A pivoting and rotating seat gives the operator a full view to either side of the compactor and to interior gauging.

The dual multi-function directional lever controls on either side of the seat enable operation from any seated position – left or right – without excessive operator stress or strain. A tilting steering column enhances operator comfort and control. A lockable dash board cover minimizes the threat of vandalism. A standard fi xed ROPS work platform with rails provides excellent operator protection.

Easy to serviceIn addition to grouped, ground-level access to common maintenance checkpoints, the DV Series compactors also feature spin-on fuel, engine oil and hydraulic fi lters for quick fi lter replacement and installation. The machines also offer a standard vertical-lift hood for trouble-free access to the engine compartment.

Vertical-lift hood provides ease of service at ground levelA vertical-lift hood makes it easy to access the engine, drive train and other key components and systems.

You can count on CaseYou can count on Case and your Case dealer for full-service solutions—productive equipment, expert advice, fl exible fi nancing, genuine Case parts andfast service. We’re here to provide you with the ultimate ownership experience. Case prideYou can take pride in the Case name on your machine. It’s backed by morethan a century of productivity and performance. Case and your Case dealerare here for you, not only when you buy the machine, but also after you put1,000 or 10,000 hours on it. A rich, proud historyCase Construction Equipment’s heritage spans more than 165 years. Growingfrom J.I. Case’s innovations with steam-powered machinery in the late 1800s,Case developed road-building equipment that helped create early 20th centurystreets and highways across the world. By 1912, Case was well on its way toestablishing itself as a full-line equipment manufacturer. The company continued to expand its construction equipment business over the years. Celebrating a tradition of innovation In 1957, Case produced the world’s fi rst integrated loader/backhoe made andwarranted by one manufacturer. Over the decades and into the 21st century,Case has continued to develop a long line of industry fi rsts and has taken aleadership role in pioneering new products and solutions. Today, Case produces15 lines of equipment and more than 90 models to meet your toughestconstruction challenges. Supported by manufacturing and sales in more than150 countries, Case serves the needs of our customers worldwide. Coast-to-coast customer supportIn North America, Case equipment is sold and serviced by more than 375 dealerlocations. No matter where you work, we’re here to support and protectyour investment and exceed your expectations. To locate a Case dealer or learn more about Case equipment or customerservice, go to www.casece.com or call 1-866-54CASE6. It all adds up. You can count on Case.

Looking for product specs, customer testimonials, competitive comparisons, fi nance offers and more? Visit us at www.casece.com or call 866-54CASE6

DV SERIES COMPACTIONDV207 DV210 DV213

Operating weight

Total 16,226 lbs (7360 kg) 22,928 lbs (10 400 kg) 28,726 lbs (13 030 kg)

Front drum 8,267 lbs (3750 kg) 11,574 lbs (5250 kg) 14,561 lbs (6605 kg)

Rear drum 7,959 lbs (3610 kg) 11,354 lbs (5150 kg) 14,164 lbs (6425 kg)

Drum (front and rear)

Width 57.1 in (1450 mm) 66.9 in (1700 mm) 82.7 in (2100 mm)

Diameter 45.3 in (1150 mm) 51.2 in (1300 mm) 53.1 in (1350 mm)

Thickness 0.6 in (15 mm) 0.9 in (22 mm) 0.8 in (20 mm)

Vibration frequency

High 3,120 vpm (52 Hz) 3,180 vpm (53 Hz) 3,000 vpm (50 Hz)

Low 2,580 vpm (43 Hz) 2,700 vpm (45 Hz) 2,520 vpm (42 Hz)

Amplitude

High 0.023 in (.6 mm) 0.028 in (.7 mm) 0.032 in (.8 mm)

Low 0.012 in (.33 mm) 0.014 in (.35 mm) 0.016 in (.4 mm)

Centrifugal force

High 14,613 lbs (65 kN) 24,729 lbs (110 kN) 30,349 lbs (135 kN)

Low 12,365 lbs (55 kN) 17,310 lbs (77 kN) 21,582 lbs (96 kN)

Travel speed

Max. travel speed 7.1 mph (11.4 km/h) 6.8 mph (11 km/h) 7.1 mph (11.4 km/h)

Max. gradability 30% 40% 40%

Engine hp (kW) 80 hp (60 kW) @ 2100 RPM 99 hp (74 kW) @ 2200 RPM 130 hp (97 kW) @ 2300 RPM

Type Diesel,Cummins BTAA3.3-C80

Diesel,Cummins QSB3.3-C99

Diesel, Cummins QSB4.5-C130

DV207

DV210

DV213

NOTE: All engines meet current EPA emission regulations.

NOTE: All specifi cations are stated in accordance with SAE standards or recommended practices, where applicable.

IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifi cations without notice and without incurring any obligation relating to such change. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equipment. Your Case dealer/distributor will be able to give you details of the products and their specifi cations available in your area.

©2011 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies. Printed in U.S.A.

Always read the operator’s manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs and use any safety features provided.

Form No. CCE201103DVSeries

Contains 10% post-consumer fi ber

Case construction equipment is biodiesel friendly.