Dust Collection - AES Environmental collection brochure...Eaziflo is a mobile, self-contained weld fume capture system, designed specifically for removal and filtration of various

Dust Collection

EAZIFLOFUME CAPTURE SYSTEM

CREATING A CLEANER

ENVIRONMENT

Eaziflo is a mobile, self-contained weld fume capture system, designed specifically for removal and filtration of various types of welding fumes, vehicle exhaust fumes and odours.

The unit features Clyde-Filtercorp’s Handy Arm, an articulated, highly manoeuvrable extraction arm, mounted on top of the filter unit, to enable the collection of fumes at the source. An alternative top for dual arm arrangement is available.

For the removal of specific contaminants, the Eaziflo features a multi-stage filtration system.

A direct drive fan draws polluted air into the unit at a nominal rate of 375 l/sec via an integrated spark arrestor. A baffle plate dispenses the dirty air evenly across the plenum, resulting in equal distribution when filtered.

A prefilter removes larger particles, and a second stage high efficiency filter removes particles down to 0.3 microns. An optional third stage carbon filter is added for control of odours. The filtered air is discharged back into the work area.

Standard units have Interfold prefilters and Clyde-Interfirm as second stage. Where odour control is required, the Clyde Interflow 80D carbon filter is used in the final filtration stage.

CONSTRUCTION

The Eaziflo is made of 2mm mild steel. Manufactured in Sections. All sections are individually powder coated prior to assembly for durability and appearance. The motor is 1.5KW (overload protected), 415V with a speed of 2900 rpm. The maximum overall fan static pressure is 1.5 kpa.

ELECTRICAL

Standard units operate on 3-phase 415V 50 Hz power via a 20 A outlet. Alternative electrical specification to suit local power supply is available on order.

The direct drive blower pulls the air through the system and discharges cleaned air back into the work environment. The blower is located in a sound insulated chamber, keeping noise levels to below 80dBA at 1m. The unit is mounted on swivel and stationary castors which allow easy movement and manoeuvring.

The disposable filters are easily reached through a side access and can be quickly and effortlessly placed directly into a bag to avoidexposure to the service technician. All filters are manufactured in Australia and available locally in all states.

DESCRIPTION

SPECIFICATIONS

ITEM PART NO. DUCT ‘A’ DUCT ‘B’ GAS STRUT

1 FEARM15-SD 450mm 450mm N/A

2 FEARM22-SD 900mm 900mm 300-N-630

3 FEARM30-SD 1200mm 1200mm 600-Nx580

4 FEARM35-SD 1500mm 1500mm 600-Nx580

AES Environmental maintains an ISO 9001:2008 quality management system to ensure process and product conformance.

© 2017 AES Environmental | Bulletin No. 17F.02.17 AES111 REV1In keeping with our policy of continuing product improvement, we reserve the right to alter specifications without notice.

THE COMPANY AES Environmental is an Australian owned manufacturing business producing products under Clyde-Apac, Email Air Handling and Vokes brand names for industries that are as varied as industrial plants, commercial buildings, power stations, food processing,

healthcare, science and electronics. AES Environmental considers the Australian Standards as a core component of its product mix and has developed an export market in 25

countries, promoting Australian Standards, engineering and manufacturing solutions. AES Environmental, a trusted manufacturer capable of delivering reliable product solutions to

highly-critical applications, where the control of hazardous airborne contamination is often critical to process and personnel.

Effective Filtration Range of CLYDE-IFC Interfirm Filters

TOBACCO SMOKE

0.01 0.1 1 10 100 1,000 10,000

OIL SMOKES

MICRONS

SUSPENDED IMPURITIES

FUMES

FOG MISTS RAIN

MOULDS

BACTERIA POLLEN

DESCENDING IMPURITIES

DUST

FLY-ASH

HEAVY INDUSTRIAL DUST

ACCESSORIES

Optional top plate to suit HCP and Tenkay-syle cartridge mounting.

HCP dust filter cartridges open up new dimensions and possibilities in the design of modern dust extractors. Strong and hard wearing, the cartridges are designed for ‘pulse-jet’ cleaning.

For specific applications different filter media can be selected, including anti-static material, PTFE coating, specialty cellulose and polypropylene.

CONSTRUCTION

Depending on design either a diffuser plate or a wire cage is inserted into the inner cylinder, located in the clean section of the filter cartridge, to give added support. The top plate can either be cast aluminium or mild steel spinning.

HCP FILTER CARTRIDGE

Specially designed venturies can be supplied where design considerations justify their selection. The filter cartridges can be supplied for mounting on the clean or dirty side of the dust collector’s plenum.

FILTER CARTRIDGE

Material85/15 Polyester/Cellulose Blend

Dimensions324mm OD x 213mm ID x 9000mm Long Efficiency 99.99% on 0.5 micron particles

Configuration Open One End / Closed One End

AES Part No.DCC325900 (900mm length)

Strong and hard wearing.

© 2017 AES Environmental | Bulletin No. 03M.03.17 AES116 REV1In keeping with our policy of continuing product improvement, we reserve the right to alter specifications without notice.

CREATING A CLEANER

ENVIRONMENT

HCPREVERSE PULSE CARTRIDGE DUST COLLECTOR

The Filtercorp HCP range of dust collectors provide superior filtration of most types of industrial dusts and fumes.Filtration of the captured dust is done at high efficiency to meet emission standards with the cartridges being star pleated to optimize filter surface area.With a variety of configurations the units can be designed to meet the needs of most applications including food manufacturing, engineering, woodworking, foundries and plants engaged in the production of paint, plastics and chemicals.

DESCRIPTION

The housing is constructed of heavy gauge pre-punched and pre-folded panels. Only four panel sizes cover the complete standard size range. All HCP units can be supplied complete with hopper and legs, as a bin vent or as an insert able unit.

HOUSING

At the heart of the HCP are self-cleaning filter cartridges that provide high filtration efficiency and low operating costs making the system compact and easy to maintain.

AES Environmental maintains an ISO 9001:2008 quality

management system to ensure process and product conformance.

EASE OF SERVICE

To eliminate cartridge removal, doors are conveniently located enabling simple filter inspection. Routine maintenance is achieved without the use of tools and is performed from the clean side of the dust collector.

SUPERIOR FILTRATION

The quality of the media dramatically affects the quality of filtration. The HCP cartridges are made from spun bonded polyester which gives superior performance compared with other media types.

DUST STORAGEA large capacity dust storage bin is connected to the conical hopper for easy disposal of the dust. Various discharge methods are available.

AUTOMATIC CARTRIDGE CLEANING

The HCP contains a purpose designed reverse pulse self cleaning system and depending on application requirements, venturies or unique nozzles are utilized to provide optimum cleaning performance.

The filter cartridges which are positioned vertically inside the unit to maximise cleaning efficiency, are made of a media that provides high filtration efficiency and low operating resistance. The low resistance combined with excellent dust release characteristics gives minimal operating costs.

FILTER CARTRIDGE

All measurements are in mm. Additional sizes are available as specials made to the clients requirements.

MODEL NO.

WEIGHT (KG)

MEDIA (SQMT) A B C D E F G H I

HCP225-4 413 20 1080 880 2398 2920 830 980 865 1640 1650

HCP225-9 569 45 1280 1080 2608 3130 1030 1180 865 1850 1650

HCP225-12 749 60 1480 1280 2758 3280 1230 1380 865 2000 1650

HCP225-16 851 80 1680 1280 2858 3380 1230 1580 865 2100 1650

HCP225-20 1104 100 1680 1680 3008 3530 1630 1580 865 2250 1650

HCP225-25 1293 125 2080 1680 3228 3750 1630 1980 865 2470 1650

HCP325-12 1533 168 2080 2080 3005 3755 2030 1980 865 2247 1742

HCP325-16 1752 224 2480 2080 3082 3727 2030 2380 865 2397 1742

HCP325-20 2045 280 2480 2480 3342 3987 2430 2380 865 2657 1742

DIMENSIONS

© 2017 AES Environmental | Bulletin No. 27A.04.17 AES112 REV2In keeping with our policy of continuing product improvement, we reserve the right to alter specifications without notice.

THE COMPANY AES Environmental is an Australian owned manufacturing business producing products under Clyde-Apac, Email Air Handling and Vokes brand names for industries that are as varied as industrial plants, commercial buildings, power stations, food processing, healthcare, science and electronics. AES Environmental considers the Australian Standards as a core component of its product mix and has developed an export market in 25 countries, promoting Australian Standards, engineering and manufacturing solutions. AES Environmental, a trusted manufacturer capable of delivering reliable product solutions to highly-critical applications, where the control

of hazardous airborne contamination is often critical to process and personnel.

The HCP-325 Range Reverse Pulse Fabric

Dust Collector combines star-pleated filter technology

with a dedicated reverse pulse cleaning system in a compact

modular housing.

MORE DUST COLLECTION PRODUCTS- Tenkay-style dust collection systems- Mini-Pulse mobile dust collectors- Purpose-engineered systems- Sonic-Pulse silovent dust collectors- Weld-fume units- Cyclones- Filter cartridges and filter bags- Portable exhaust fans- On site service and repairs- Engineering surveys- Gravimetric dust sampling surveys

MINIPULSECOMPACT DUST COLLECTOR

CREATING A CLEANER

ENVIRONMENT

DESCRIPTION

The portable MiniPulse provides strong suction to capture dust and fumes at source. Filtration of the captured dust is done at high efficiency to meet emission standards with the single filter cartridge being star pleated to optimize filter surface area.A range of options enables units to be configured to meet needs of most applications including the pharmaceutical industry, food manufacturing, engineering, foundries, woodworking and plants engaged in the production of paint, plastics and chemicals.The MiniPulse combines a very efficient fan, washable filter cartridge and dust storage bin in a single assembly with the fan and motor being positioned on the clean air side of the unit. The whole assembly is mounted on wheels for easy movement in confined spaces.

CONSTRUCTION

HOUSINGSThe housing is constructed from 2mm steel with exterior finish in baked enamel that has been specially developed for hostile production environments. Stainless steel is also available.

CARTRIDGEThe filter cartridge, positioned vertically inside of the unit to maximize cleaning efficiency, is made of spun-bonded polyester.This material has excellent air permeability while boasting high filtration efficiency. The cartridge is accessible from the clean air side of the MiniPulse. Ranges of filter surface finishes are available, including PTFE-coating and anti-static material.

FANA direct drive fan with a dynamically balanced backward curve fan wheel is designed to provide high extraction volumes at low noise levels.

ELECTRICALStandard units operate on 3-phase 415 V 50 Hz power via a 20 A outlet. Alternative electrical specification to suit local power supply is available on order.

DUST STORAGEA large capacity dustbin under the cartridge is mounted on its own wheels.

AUTOMATIC CARTRIDGE CLEANINGDuring operation, the cartridge is cleaned automatically by regular pulsing with compressed air. Cleaning is non-disruptive and controlled by a solid-state timer. The consumption of compressed air is low at 30 litres per minute of free air.

AIR RECEIVERThe integrated compressed air receiver is pressure tested and certified.

EASE OF SERVICE

The design of the MiniPulse minimises exposure of service personnel to collected dust. The upper section of the unit hinges up to provide service access to the filter cartridge, with gas struts supporting the opening part of the unit. The dustbin can be easily separated from the unit without the use of tools.

PERFECT MATCH

The MiniPulse can be combined with the articulated Handy Arm. The Handy Arm has a swivel base that bolts straight on the optional inlet adapter of the MiniPulse. The standard Handy Arm has a reach of 2.5m and while mounted on the MiniPulse, can provide an arc of 180 degrees. Two knee-joints allow accurate positioning of the suction hood. The knee joints are external to the suction pipes and cause no obstruction to air flow. If required a halogen light can be mounted to the hood to illuminate the source of contamination.

OPTIONS

Special Filter Cartridges:- Discharge filters- Discharge silencer- Stainless steel construction- Articulated Handy-Arm (single and dual)- Alternative inlet pieces- Spark arrestor- Single phase 220-240V fan motor- Lockable wheels

© 2017 AES Environmental | Bulletin No. 18J.01.17 AES109 REV1In keeping with our policy of continuing product improvement, we reserve the right to alter specifications without notice.






NEGATIVE AIR FAN FILTER MODULESIMPROVING THE AIR YOU BREATHE

CREATING A CLEANER

ENVIRONMENT

APPLICATION

Email Air Handling Negative Air Fan Filter Modules are designed for use in applications where critical contaminants must be isolated. Typically used for asbestos removal.

PERFORMANCE

The HEPA filters are individually tested on a NATA accredited Hot DOP test rig to AS2252.6 and filter efficiency is always guaranteed. Hot DOP testing is an essential part of HEPA filter manufacture since only Hot DOP creates a fog of 0.3 micron particles to challenge the filters efficiency. To pass inspection each filter must achieve a minimum efficiency of 99.99%. The module HEPA filter is designed and tested to supply 566 l/s at an initial resistance of 250 Pa.

DESCRIPTION

The Negative Air Fan Filter Module is manufactured in Australia to conform with the performance requirements of AS2252.6. The robust cabinet houses a fan, pre-filter and a HEPA filter. This combination ensures the removal of airborne contamination by air drawn in by the fan and passing through the filters.

LIMITATIONS

Email Air Handling Negative Air Fan Filter Modules must not be used where products and materials such as inflammable vapours and airborne biological agents present an exposure risk to personnel.

STANDARD SPECIFICATION

HEPA filters will be individually tested to AS2252.6 by a NATA accreditation laboratory.

CABINET Constructed from 1.5mm galvabond steel.

FAN Heavy duty direct drive fan with variable speed control for extended filter life.

FILTER

HEPA filter strictly conforming with AS 4260. The filter cell is securely sealed to a metal frame with a high density neoprene gasket. Australian manufacture and testing ensures that filters are less likely to require on-site repair.

POWER Provided via a single phase, 240 volt, 10 amp, 3 pin plug.

WEIGHT 96kgs.

CONSTRUCTION

FILTER REPLACEMENT

Pre-filter Part No. 1516-1538/7HEPA Part No. 1589-7182/305

MAINTENANCE AND SERVICE

Modules should be inspected and tested on-site:• before use.• after repairs.• when HEPA filter is renewed.Such testing ensures conformity with AS2252.6. Both filters are serviced from the dirty air side. Replacement filters, spare parts and servicing facilities are available in all capital city’s. Suitable PPE must be worn when changing either of the filters, ensuring that the contaminated filters are disposed of correctly.

HOW TO SPECIFY

Filter unit shall be AES Environmental Negative Air Fan Filter Module. Unit model number 1687-1600/4 with a rated airflow of 566 L/s. Filter unit and replacement HEPA and pre-filters shall be manufactured in Australia. HEPA filters will be individually tested to AS2252.6 by a NATA accredited laboratory.







CONTROLS

Each unit has a recessed control panel housing an ON/OFF switch, fan speed adjustment knob, alarm, alarm indicator, alarm test switch, 3 pin mains panel mounted plug and Magnehelic gauge.

The alarm sounds and the alarm indicator lights up when the HEPA filter becomes dirty. At this point the filter works well below it’s rated capacity. The alarm test switch tests for the normal operation of the alarm, alarm indicator and internal battery.

The Magnehelic gauge indicates the pressure drop across the filter. The normal value is pre-set at 250 - 280 Pa.

FAN SPEED ADJUSTMENT

ON/OFF SWITCH ALARM

POWER

MAGNEHELIC GAUGE

SILOVENTREVERSE PULSE DUST COLLECTOR

CREATING A CLEANER

ENVIRONMENT

The Filtercorp Silo-Vent range of Dust Collectors provides a computer designed range of continuous cleaning systems for the removal of dust from industrial applications.The filter surface area is optimised by using either filter bags or pleated cartridges.With a variety of configurations available, the units are designed to meet the needs of many applications including cement, fly-ash, grains, limestone, sand and similar bulk storage handling materials. The self-cleaning filter or filter bags provide very high filtration efficiency with minimal maintenance requirements. This enables operating costs to be kept to a minimum.

HOUSING

The housing is constructed of one-piece heavy gauge mild steel with various surface protections available.

FILTER CARTRIDGES OR BAGS

The filter cartridges or filter bags are positioned to maximise cleaning efficiency. The media provides high filtration efficiency and low operating resistance. This low resistance combined with excellent dust release characteristics achieves minimal operating costs.

AUTOMATIC CARTRIDGE OR BAG CLEANING MECHANISM

The Silo-Vent contains a purpose designed, reverse pulse cleaning system. Depending on application requirement, venturis or unique nozzles are utilised to provide optimum cleaning performance.

EASE OF MAINTENANCE

In a Silo-Vent, operating at optimal conditions, the filter cartridges or filter bags should last approximately two years. The Silo-Vent dust collector is designed for tool-free filter cartridge or filter bag removal.The performance of the Silo-Vent dust collector surpasses the performance of other static and envelope type dust collectors. The Silo-Vent dust collector“Midi” model fits new installations and replacement of existing Green Bag units. The “Midi” unit can be installed directly into the collar of Green Bag units. Due to the lack of moving parts the Silo-Vent is extremely user friendly and requires very little maintenance thus ensuring years of trouble free operation.

DESCRIPTION


SPECIFICATIONS

MICRO MIDI SCHOONER TANKARD

Part Number DCSV2 DCSV4 DCSV6 DCSV9

Unit Area (1.3m Height x Diameter) 887mm 887mm 1230mm 1530mm

Filter Area (m2) 10.5 15.75 28 49

Filter Cartridges 6 9 16 28

Capacity (L/s) Up to 250 Up to 375 Up to 675 Up to 1200

Pulse Pressure (Kpa) 620 Kpa 620 Kpa 620 Kpa 620 Kpa

Compressed Air Consumption 1.9 L/s (4cfm) 1.9 L/s (4cfm) 1.9 L/s (4cfm) 2.9 L/s (6cfm)

Material

Filter Cartridge Material

Cleaning System

Cleaning System Timer

Power Requirement

Clean Air Outlet

Mild Steel baked enamel paint finish

Spun Bonded Polyester Cartridges

Pulse jet with sonic nozzles

Solid State

240 volt or 110 volt

150mm 250mm O.D. Spigot

OPTIONAL EXTRAS AVAILABLE

• A range of finishes: Epoxy Coating, Powder Coating & Hot Dip Galvanised

• Manometer or Magnahelic gauge• Built in pressure releif valve• EPS Electronic Pressure Sensor• Electronic demand pulse• Silo pressure relief valve• Airline regulator-lubricator filter• Collar to fit existing installations• Bin level indicators• Emission probes• Outlet Fan


• Tenkay-style dust collection systems• Mini-Pulse mobile dust collectors• Purpose-engineered systems• Sonic-Pulse silo vent dust collectors• Weld-fume units• Cyclones





OTHER DUST COLLECTION PRODUCTS

• Filter cartridges and filter bags• Portable exhaust fans• On site service and repairs• Engineering surveys• Gravimetric dust sampling surveys

Documents

Dust Collection - AES Environmental collection brochure...Eaziflo is a mobile, self-contained weld fume capture system, designed specifically for removal and filtration of various