DURATAPE TM RGBW - Targetti · LED Tapelight strip emits sharp, color changing effects in outdoor niche, cove and architectural decorative applications. RGBW LED Data Model Wt/LED

Targetti USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: [email protected] - www.Targetti.us - 01.31.19 - Page 1 of 7

DURATAPETM RGBWIP20 INDOOR

Spacing 0.47” OC LED Spacing

LEDs 25 LEDs per foot

End Preps Factory preped end preps available (See Page 2)

Field Cuts See page 2 for cut zones

Mounting Includes installation-ready 3M tape adhesive for simplified installation directly to mounting channel or application surface

Installation Optional aluminum channels with base and cover can be used to install decorative, protective covers

Power Supply Listed Class 2 output, 24V DC power supply required

Listing cULus Class 2 Listed E471161 Tested in accordance with LM-79-08A Title 24 commercial installation compliant.

Compliance ROHS compliant

MRI Safe, driver to be mounted outside of MRI room

Warranty 3 year warranty

• Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with 2700ºK White LED to create different tone of White or soften the RGB color pallet

• Ideal for IP20 interior location applications such as cove, under- counter/cabinet, and lighting accents

• Sold per foot and manufactured to specified lengths with factory attached end preps

• All Duratape features 2-circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability

• All Duratape features double sided solder points for maximum conductivity and durability

• Pre-assembled to specific lengths with various connector options for project requirements and efficient power configuration

• Max continuous length: up to 16’ per run

• DMX 512 drivers available (see pg. 7)

PRODUCT CODE INTENSITY WATTAGE IP RATING LED COLOR VOLTAGE + END PREP + MOUNTING + POWER SUPPLY

DL — Duratape™ HO — High Output

44 — 4.4 W/ft I — Indoor IP20 RGBW —Quad Chip:Red: 625nm, Green: 520nm, Blue: 450nm, 2700ºK White

24 — 24 VDC

Dimensional Drawings

Key Features

Ordering Guide

Duralamp - Duratape ES (XS) Static Indoor

Duralamp - Duratape Static Indoor. With option PVC sleeve

0.48"

0.47" O.C.

5/16”O.C.

13/32”

Duralamp - Duratape Static Indoor


0.09"

5/16”O.C.

13/32”

Duralamp - Duratape Static Indoor


Duralamp - Duratape ES (XS) Static Indoor


Field cut possible every 4”. Caution! Field cutting should only be done before power is connected.

RGBW TapelightLED Tapelight strip emits sharp, color changing effects in

outdoor niche, cove and architectural decorative applications.

RGBW

LED DataModel Wt/LED Viewing

AngleLifespan at 90% drive

RGBW 0.24 120° 40,000hrs

* LEDs operating at 90% of LED manufacturers maximum current rating.

Fixture DataModel Efficacy

Lm/WtLm/Ft Wt/Ft

RGBW* 36.14 159 4.4

* Meets Title 24 High efficacy rating.

Details

IP20

Class 2

Design Installation Examples

Under CounterDirectional

Toe Kick

Under CounterCove Lighting

Shelf Lighting


Toe Kick


Shelf Lighting


Toe Kick


Shelf Lighting

Under CounterDirectional Task

Under Counter Task

Cove

T24CALIFORNIA

COMPLIANT

A

MRI

MRI

safe



A

H G

F F

B

H G

F F

A07UI4CBL1 (4-circuit RGBW or RGB+W) Factory attached single 4 circuit lead wire prep. 24” five conductor Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end.

07UI4ADDCBL: ADDITIONAL LEAD WIRE (4-circuit RGBW or RGB+W) Additional lead wire purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length.

B07UI4CBL2 (4-circuit RGBW or RGB+W) Factory attached double ended 4 circuit lead wire prep. 24” five conductor lead wire at both ends. One end can be used for power connectivity while the other end can be used for interconnection to run to an additional length of Duratape.

07UI4ADDCBL: ADDITIONAL LEAD WIRE (4-circuit RGBW or RGB+W) Factory attached single 4 circuit lead wire prep. 24” four conductor Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end.

End Preps and Connectors

Required end preps: (One required for each run of tape)



DL-I-MCHAN-4Linear Mounting channel. Available in 4’ lengths.

DL-C-2PC-C (Clear)DL-C-2PC-F10/F30/F60 (Frosted)Two-piece mounting tube; base (white) with cover (frosted) for linear applications. Frosted diff usion levels, 10%, 30% or 60%. Available in 4’ lengths.

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

0.20”

0.66”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

0.20”

0.375”

0.66”

0.62”

DL-ALUM-U-8Low profi le aluminum U-Channel for linear run lengths. Available in 8ft lengths. 1/2” ID, 5/8” OD, 1/4” H

DL-ALUM-L-6Aluminum L-Channel 1/2” x 1/2” for linear run lengths. Duratape can be mounted at either 0º or 90º mounting positions. Available in 6’ lengths.

Profiles

DL-C-45-MCH-4 (Base, REQUIRED)45° mounting base (white) for 45° mounted linear applications. Available in 4’ lengths.

DL-C-45-CVR-4-C (Clear)DL-C-45-CVR-4-F10/F30/F60 (Frosted)45° mounting base cover. Available in 4’ lengths.

0.81”

.73in

0.73”

0.87”



PRAN2045º aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diff user cover. Available in 6’ lengths.

KTPRAN20Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length termination.

PRIN20Flush mount aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diff user cover. Available in 6’ lengths.

KTPRIN20Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length termination.

PRAP20Surface mount aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diff user cover. Available in 6’ lengths.

KTPRAP20Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length termination.

PRINTCGSurface mounted walk over rated continuous illumination aluminum channel. Includes frosted polycarbonate cover for shadowless light distribution. Complete with track for easy strip insertion. Available in 1M lengths.

KTPRINTCGMounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length termination.

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

0.48”

0.63”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

0.63”

0.77” 50,5

5 m

m 12,4 mm

12,5 mm

47,4 mm

50 mm

49,7

mm

50 mm

12,42 mm

85 mm

47,4 mm

35 m

m

33 m

m

we changed the color fo the back slide because this is aluminum as the rest of the channel, while we colored bluish the polycarb screens, psl note

19,4

mm

16 mm

25 mm

8 m

m

0.76”

1.00”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

0.48” 0.39”

0.63”

0.92”

Profiles

0.60”

2.52”

1.00”

PRINCGFlush Mount aluminum profi le for installation in plasterboard. Complete with white lens. Available in 6’ lengths.



DuraProfile Plus - Aluminum Double and Single Emissions

PRDESO (Required)Double emission aluminum channel. Available in 4’ lengths.

PRDESO-FL (Optional)Front lens in flat opal polycarbonate. Available in 4’ lengths.

PRDESO-FLR (Optional)Couple of opal polycarbonate rear lens. Available in 4’ lengths.

KTPRDESO-FL (Required)Set of two end caps.

KTPRDESO (Required)Suspension kit completed with suspension mounting kit and 5ft aircraft cable.

• Linear architectural profile configurable in direct, indirect emission or both, for high levels of light emission

• The direct emission is configurable with the use of 1to 4 Duratape strips; Indirect emission uses two strips

• Mounting: On ceiling for unidirectional or suspended for unidirectional or double emission (direct & indirect)

• Manufactured according to specification, with lens (flat front and rear pair of lens’ for indirect emisison), side closure caps and suspension kit

• Rear support required for ceiling mounting, code PRDESO-SL

• Profile features internal compartment suitable for integral power supply and dimming module (Consult Factory)

• Possibility of on/off switching and dimming separate for direct and indirect lighting

PRDESO (Required)Double emission aluminum channel. Available in 4’ lengths.

PRDESO-SL (Optional)Rear support for surface mount. Available in 4’ lengths.

PRDESO-FL (Optional)Front lens in flat opal polycarbonate. Available in 4’ lengths.

KTPRDESO-FL (Optional)Set of two end caps.

54 LINES OF LIGHT FOR GENERAL LIGHTING

DURAPROFILE PLUS DOUBLE EMISSION ARCHITECTURAL PROFILE

DURAPROFILE PLUS - ALUMINIUM DOUBLE EMISSION PROFILE *

Code Description L Barcode80119058

new PRDESO Double emission aluminium profile 1220 39970 1new PRDESO-SL Rear support for surface mount 1220 39987 1new PRDESO-FL Front screen in flat opal polycarbonate plate 1220 39994 1new PRDESO-FLR Couple of opal polycarbonate rear screen 1220 40020 1new KTPRDESO-FL Set of two side caps flat screen - 40068 1new KTPRDESO Suspension kit - 40051 1

* Available upon request.

Linear architectural pro�le con�gurable in direct, indirect emission or both, for high levels of light emission . The direct emission is con�gurable with the use of 1 to 4 strips; indirect emission foresees two strips . Mounting: on ceiling for unidirectional or suspended for unidirectional or double emission. The aluminium pro�le is completed, depending on the application chosen, with screens (�at front and rear pair of screens for indirect emission), side closure caps and suspension kit .

For ceiling mounting the rear support is required, code PRDESO-SL, on which the pro�le can be attached . Compartment inside the pro�le suitable for the insertion of the power supply and dimmer . Possibility of on/o� switching and dimming separate for direct and indirect lighting.

SUSPENDED MOUNTING WITH TWO STRIPS FOR INDIRECT LIGHTING AND 4 FOR DIRECT LIGHT

CEILING MOUNTING WITH 4 STRIPS FOR DIRECT LIGHT

CEILING MOUNTING WITH 3 STRIPS FOR DIRECT LIGHT

Suspended mounting shown with 2 strips for indirect lighting and up to 4 strips for direct light.

Ceiling mounting shown with 4 strips for direct light.

Ceiling mounting shown with 3 strips for direct light.

KTPRDESO-FL

Suspended Surface Mount

2.87"

2.44"

5ft Max.



Profiles

2.00”

2.00”

0.50”

0.50”

2.00”

2.00”

Surface Mount Wall

Surface Mount Wall

Surface Mount Ceiling

Surface Mount Ceiling

Surface Mount Corner Horizontal or Corner Vertical

3.75”

1.38”

PRDESurface mounted double emission aluminum profile with dual opal lenses. Dual tape illuminating (two runs of tape) in opposite directions. Available in 4' lengths.

KTDEAPSet of two end caps for double emission profile.

PRDSAPSurface mounted aluminum profile with dome opal lens. Dual tape illumination (two runs of tape). Available in 4' lengths.

KTDSAPSet of two end caps for dome profile.

PRDSANSurface mounted 45º aluminum profile with domed opal lens. Dual tape illumination (two runs of tape). Available in 4' lengths.

KTDSANSet of two end caps for dome profile, mounting at 45º.



Power Supply(REQUIRED)

Type WattageInput/Output Voltage

Dimmable IP Rating Output Dimensions

Controller (Optional) Type Application Voltage Listing Dimensions# Ouput Channels

Number of Zones

Number of Scenes

SWITCH20RGBW Touch DMX512 Wall Control Panel with Sensitive Glass Touch Panel, White Finish

Indoor Only 12-24V DC UL 4.73”H x 2.95”W x 1.15”D 12 3 1

TGDMXSLESAU9Stand-alone DMX Programmable Controller with Easy to Use Software Interface

Indoor Only 5.5V DC ETL, UL 5.3"W x 5.5"H x 1.9D 256 1 20

TGCBUPWMX44CASAMBI PWM four channel wireless Bluetooth controller

IP20 24V DCUL

Plenum 2.2” x 1.2” x 0.7” 4 1

CASAMBIApp Drivin

TGDMXSLESAU9 TGCBUPWM44

DEDDxxxDMXconsult factory

ELECTRONIC ADDRESSABLE DMX DRIVER STANDALONE, UL LISTED ENCLOSURE PROVIDED BY OTHERS

consult factory

120-277V / 24V

DMX DIMMING N/A UR CLASS 2 consult factory

Fixture Wattage

Dri

ver

Wat

tage

2.8W 3.0W 3.9W 4.2W 4.4W 8.8W

40W 11FT 10FT 8FT 7FT 7FT 3FT




2X90W (2) 25FT (2) 24FT (2) 18FT (2) 18FT (2) 16FT (2) 8FT

3X90W (3) 25FT (3) 24FT (3) 18FT (3) 18FT (3) 16FT (3) 8FT

100W 28FT 26FT 20FT 19FT 18FT 9FT

2X100 (2) 28FT (2) 26FT (2) 20FT (2) 19FT (2) 18FT (2) 9FT

TAPE MAXIMUM LENGTH IN FEET PER DRIVER

1 Dimensions include enclosure with mounting bracket.* Constant voltage drivers 50/60HZ, voltage regulated with short circuit protection. Operating temperature -40 C- 80° C * Installation of power supply must be compliant to Class 2 installation standards. Refer to NEC and local building code requirements.

DEDDI1001244CDMX ELECTRONIC ADDRESSABLE DMX DRIVER 100W120-277V / 24V

DMX DIMMING4 CHANNEL

NEMA1 ENCLOSURE

UL CLASS 2 12” x 12” x 4”1

DEDDI2002244CDMX ELECTRONIC ADDRESSABLE DMX DRIVER 2X100W120-277V / 24V

DMX DIMMING4 CHANNEL

NEMA1 ENCLOSURE

UL CLASS 2 12” x 12” x 4”1

SWITCH20

Documents

DURATAPE TM RGBW - Targetti · LED Tapelight strip emits sharp, color changing effects in outdoor niche, cove and architectural decorative applications. RGBW LED Data Model Wt/LED