Ducting ADSS Duplex - Emtelle

Excellent rodent resistance

Max rated design tension up to 1.5 kN

100% waterproof

The smallest diameter

Perfect solution for multi-dwelling units

Easy access to the fiber at any place of the cable

Up to 48 fibers

Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers

Max rated design tension up to 40 kN


All-dielectric design

Cost-effective designExcellent rodent resistance

Reduced weight and size

Up to 24 fibers

Superior blowing solutionsIdeally suited to Emtelle microducts

Blowing CT FibreFlow

FibreFlow

12f Ø2.4 mm

up to 48f (4×12) Ø3.6 mm up to 72f (6×12) Ø4.4 mmup to 96f (8×12) Ø5.1 mmup to 288f (24×12) Ø7.9 mm

Blowing MT

5/3.5 & 7/3.5 & 7/4

10/610/6 & 10/8 & 12/810/8 & 12/8 & 12/10 & 14/1014/10 & 14/12 & 16/12 & 18/14 & 20/15

Tested &

approved

undergo regular quality tests at our specially equipped test sites

are created and certified to use with Emtelle microducts

Discover all Emcab’s Blowing cables

See our blowing tracks

Use our free software to select the complete package for blowing technology

are proven to deliver an optimum blowing performance

is a brand new optical cable manufacturer, operating all over the world.






Easy to install

Easy to install

Easy to install


Easy strippable tubes

Suitable for aerial installation

All-dielectric design Max rated design tension up to 2.7 kN





Cost-effective design



Excellent rodentresistance



Cost-effective designCost-effective design









Reduced weight and size Reduced weight

and size

Up to 24 fibers

Up to 24 fibers

Up to 48 fibers

Up to 48 fibers

Up to 432 fibers



All-dielectric design Fiberglass yarns prevent damage by rodents


DuctingDucting CT CST Light

Ducting MT CST Light

Ducting MT FiberGlass

Ducting MT Aramid

Ducting MT FiberGlass DJ

Ducting HCF 864

Ducting MT HFC 432

Ducting MT CST

Ducting CT GSW

Ducting MT CST DJ

Direct Burial SST

Ducting MT FiberGlass SoftTubes


Easy to install


Up to 864 fibers


Direct BurialDirect Burial CT CST Light

Direct Burial MT CST Light

Direct Burial MT CST DJ

Direct Burial MT CST

Direct Burial CT GSW2 Direct Burial MT FRP2

Direct Burial MT GSW Special

Direct Burial MT GSW2 Special

Direct Burial CT FRP2

Direct Burial SST GSW

Direct Burial CT GSW

Direct Burial CT FRP

Direct Burial MT FRP

Direct Burial MT GSW

Improved reliability due to inner jacketing




Up to 24 fibers



Up to 24 fibers


Reliable protection from serious mechanical impact

Max rated design tension up to 80 kN (using rope wire)

Reduced weight, suitable for aerial installation







The smallest diameter

Improved reliability due to inner jacketing



Suitable for harsh environment applications


Up to 24 fibersMax rated design tension up to 50 kN



Suitable for application in harsh environments


Certified as CPR compliant Euroclass Dca

Up to 96 fibers


Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers

Max rated design tension up to 80 kN (using rope wire)


Direct Burial MT GSW2


Aluminum polymer jacket protects the cable core from moisture

Excellent solution for wetland and cross-river installation


Aluminum polymer jacket protects the cable core from moisture

Excellent solution for wetland and cross-river installation


SubmarineSubmarine CT GSW2

Submarine SST GSW2

Installation down to 5000 m

Installation down to 2500 m



Up to 96 fibers

Up to 24 fibers

ADSS

ADSS Flat Type Micro

ADSS FiberGlass DJ

Distribution TB

Distribution MT

Simplex

Duplex

Distribution Fire Rated

ADSS Defender

Applied as ‘the last mile’ in cottage villages

Reduced weight and sizeCost-effective design


Easy strippable micro tubes

ADSS FiberGlass Soft Tubes

ADSS Aramid

ADSS FiberGlass

ADSS Aramid DJ

Aerial installation on distribution and transmission lines up to 35 kV

Low susceptibility to ice and wind loads

Application up to 10 kNwith span lengthsup to 200 m




Cost-effective designAerial installation on distribution and transmission lines up to 35 kV

Aerial installation on distribution and transmission lines up to 35 kV and above

The most reliable among ADSS cables. Double tensile strength



Aerial installation on distribution and transmission lines up to 35 kV and above

Optical ground wire (OPGW) shields high-voltage conductors from lightning strikes

Completely protected from water ingress. Anti-rodent additive in the outer jacket for first-line protection


Superior protection from mechanical damage — FRP rods provide strength and second-line protection

Indoor

Riser TB

Riser MT

Perfect solution for multi-dwelling units

Easy access to fiber at any place of the cable

High density of fibers makes it possible to bundle up to 24 fibers into micro loose tubes and place up to 48 micro loose tubes in a cable



Flame-retardant

Perfect solution for offices and data centers

Easy termination

More flexible compared to Riser Cable

Up to 48 fibers

High density of fibers makes it possible to bundle up to 24 fibers into micro loose tubes and place up to 48 micro loose tubes in a cable

Flame-retardant

Flame-retardant

Compact and flexibleCable can be terminated with a standard connector

Flame-retardant

Compact and flexiblePerfect solution for patch cords manufacturing

All-dielectric designRemains functional under direct flame for at least 180 minutes

Up to 24 fibers

DropFlat Type Drop Reinforced

OPGW S

Ground Wire



Operation temperature range down to -50°С

Operation temperature range down to -50°С


Max rated design tension up to 700 N


Flat Type Drop

Round Type Drop Tight-buffered

Round Type Drop









OPGW C

OPGW CA

OPGW/Ground Wire Hang me up on the wall

Up to 96 fibers

Aluminum alloy wires shield the high-voltage conductors from lightning strikes

Aluminum-clad steel wires are corrosion-resistant

Up to 96 fbersHighly corrosion-resistant: ACS wires and aluminum-clad stainless steel tube


Up to 288 fibers


Aluminum alloy wires provide conductivity for fault current


Highly corrosion-resistant: ACS wires and aluminum pipe


Mandatory element of 35 kV power lines approaching electrical substations and of all 110 kV power lines


OPGW AP

Convenient splice preparation

Fire RatedFire Rated Dielectric

Fire Rated Outdoor



Remains functional under direct flame for at least 180 minutes

Up to 24 fibers


Easy to install

Up to 288 fibers

Up to 24 fibers


Remains functional under direct flame for at leasr 180 minutes



Fire Rated Dielectric Light

Ducting SST

Fire Rated Universal

Fire Rated Universal Dielectric

Up to 96 fibers

Up to 144 fibers

Small size – thin, light, economical


Suitable for all applications

Suitable for all applications

Easy to install

Reduced weight and size. Low susceptibility to ice and wind loads

discover more at emcab.co

Sønder Felding, Denmark Perm,

Russia

Hawick, Scotland

Arlington, TX, the USA

Erfurt, Germany

SUPERIOR BLOWING SOLUTIONSand all types of optical cable

ABC-configuratorFirst-class quality

12-way:

24-way:

14-way:

7-way:

19-way:

8-way:

24-way HEX:

Configurator is a unique software tool designed for automatic

selection of the package solution for blowing technology. By choosing

necessary parameters, it will help you choose the optimal solution to

your requirements: applicable cable design, suitable tube and closure.

• cable that meets your requirements

and datasheet for it

• suitable tube diameter and datasheet

for it

• cable installation tips

• range of suitable closures with

datasheet for them

One-click complete solution package!

• cable application

• fiber count and size

• jacket type

• cable diameter

• tube size

2. You get:

1. Select necessary characteristics:

Our blowing tracks are customer specific and conform to IEC 60794-1-21:2015 Standard for Blowing test track:

Use our free software to select the complete

package for blowing technology

[email protected] emtelle.com

First-class production4 production sites.

First-class materials CORNING® SMF-28® ULTRA is in the

heart of Emcab’s cables.

Production sites Blowing tracks

[email protected]

linkedin.com

Emcab is a brand new optical cable manufacturer, operating all over the world with

headquarters in Erfurt, Germany and 4 production sites.

It is a joint venture between Emtelle and Incab.

Emtelle (www.emtelle.com) is a leading global manufacturer of pre-connectorised, blown

fiber cable, and ducted network solutions.

Incab (www.incab.co) is a leading worldwide optical cable manufacturer.

Now, those two industry leaders join forces by combining their expertise, energy and

innovation power to deliver full fiber cable solutions to customers through Emcab.

Together Emcab cables and Emtelle microduct solutions cover all customer needs.

Superior microducrts from Emtelle

Ducts configuration

Emtelle microducts are approved by the largest

network operators in the European market. With our

own test laboratories, test tracks and our solutions

team, we are ideally equipped to withstand the strict

requirements for micro tubes.

Microducts need to be made for their

intended environment. Emtelle doesn’t

just turn a material into a tube.

The technology behind simplicity is

the key to embrace the cable.

1-way: 2-way: 3-way:

With our Em-Liner which is extruded during the

manufacturing process, the friction between duct and

cable is reduced to a minimum and promises better

blowing results up to 50%. We carry out 10 different

quality checks on every microduct during and after

manufacture. Our strict tolerances promise the best

results. IEC standards are what Emtelle always looks to

exceed.

5-way: 6-way:4-way:

Emcabs air blown cables undergo regular approval tests at our

regional test tracks using our latest Manufacturing & Design

Technology.

Hawick

Sonder Felding

Perm

Test site characteristics:

• Route length up to 2000 m

• Cable diameter range: 2.5–16 mm

• Tube inner diameter: 4.0–20.0 mm

Test site characteristics:

• Route length up to 1350 m

This route consists of the two

following separate routes:

• 1250 m 50/4.6 mm subduct, multiple

micro ducts are thenblown in at the

same time

• 1550 m 50/4.6 mm subduct, multiple

micro ducts are then blown in at the

same time

Erfurt

• Route up to 50/4.6 mm coming soon

Watch the blowing test

Documents

Ducting ADSS Duplex - Emtelle