Upload
rahul-pal
View
219
Download
0
Embed Size (px)
Citation preview
7/30/2019 DSS - QB Solutionss Part 1
1/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
Digital Signals and Systems QB Solution
Unit I
1. What is signal processing?
Signal processing is a method of extracting information from the signal which in turn depends
on the type of signal and the nature of information it carries. Thus signal processing is concernedwith representing signals in mathematical terms and extracting the information by carrying out
algorithmic operations on the signal. The information contained in the signal can also beextracted either in the original domain or in the transformed domain.
Two Types of Signal Processing
- Analog Signal Processing(ASP): The processing of analog signals to extract
information is called as ASP-
- Digital Signal Processing: The processing of analog signals to extract information iscalled as DSP
2. What are the advantages of Digital Signal Processing (DSP) over Analog Signal
Processing (ASP)?
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
2/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
3. What are the disadvantages of DSP over ASP?
4. Discuss the applications of DSP?
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
3/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
5. Define & give the graphical representation of the following functions: i. Unit ramp
ii. Unit step
iii. Unit impulse
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
4/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
5/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
5. Discuss the classification of Signals.
Signals can be classified based on their nature and characteristics in the time domain. They are
broadly classified as
(i) Continuous-time signalsA continuous-time signal is a mathematic ally continuous function and the functionis defined continuously in the time domain.
(ii) Discrete-time signals.Discrete-time signal is specified only at certain time instants. The amplitude of the
discrete-time signal between two time instants is just not defined. Figure belowshows typical continuous-time and discrete-time signals.
/
Both continuous-time and discrete-time signals are further classified
(i) Deterministic and non-deterministic signals.(ii) Periodic and aperiodic signals.(iii) Even and odd signals.(iv)Causal and Non-causal Signal
(v) Energy and power signals.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
6/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
Note: Also, write down the one line definitions of the each of the above type of signals in the answer
6. Show that the product of two even signals or two odd signals is an even signaland that the product of an even and an odd signal is an odd signal
8. With illustrations, explain the following for discrete time signals.
i. Shifting
ii. Folding
iii. Time scaling
ShiftingIn the case of discrete time signals, the independent variable is the time, n. A signal x(n) may
be shifted in time, i.e. the signal can be either advanced in the time axis or delayed in the time
axis. The shifted signal i represented by x(n k), where k is an integer. If k is positive, thesignal is delayed by k units of time and if k is negative, the time shift results in an advance ofsignal by k units of time. In realtime signal processing applications, the operation of advancing
the time base of the signal is physically unrealizable.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
7/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
FoldingThis operation is done by replacing the independent variable n by n. This results in folding of
the signal about the origin, i.e. ii = 0. Folding is also known as the reflection of the signal aboutthe time origin n = 0. Folding of a signal is done while convoluting the signal with another.
Time scaling
This involves replacing the independent variable n by kn, where k is an integer. This process isalso called as down sampling. If x(n) is the discrete-time signal obtained by sampling the analogsignal, x(t), then x(n) = x(nT ), where T is the sampling period.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
8/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
9. Discuss the classification of systems.
Ans:
Note: Also, write down the one line definitions of the each of the above type of system in the answer
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
9/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
10. Draw and explain the block diagram of an analog to digital converter.
Ans:
Figure 1.11 shows the block diagram of an analog-to-digital converter. The sampler extracts thesample values of the input signal at the sampling instants. The output of the sampler is the
discrete4ime signal with continuous amplitude. This signal is applied to a quantiser whichconverts this continuous amplitude into a finite number of sample values. Each sample value can
be represented by a digital word of finite word length. The final stage of ana1og-todigitalconversion is encoding. The encoder assigns a digital word to each quantised sample
Sampling of Continuous-time Signals
Sampling a signal is the process of acquiring its values only at discrete points in time.
Sampling is a process by which a continuous-time signal is converted into a discrete time signal.
This can be accomplished by representing the continuous time signal x(t), at a discrete numberof points. These discrete number of points are determined by the sampling period, T, i.e. the
samples of x(t) can be obtained at discrete points t = nT, where n is an integer.
Quantisation and encoding
A discrete-time signal with continuous-valued amplitudes is called a sampled data signal,whereas a continuous time signal with discrete-valued amplitudes is referred to as a quantised
boxcar signal.Quantisation is a process by which the amplitude of each sample of a signal is rounded off to the
nearest permissible level. That is, quantisation is conversion of a discrete time continuous-amplitude signal into a discrete-time, discrete-valued signal. Then encoding is done byrepresenting each of these permissible levels by a digital word of fixed wordlength.
The process of quantisation introduces an error called quantisation error and it is simply thedifference between the value of the analog input and the analog equivalent of the digitalrepresentation. This error will be small if there are more permissible levels and the width ofthese quantization levels is very small. In the analog-to-digital conversion process, the only
source of error is the quantiser. Even if there are more quantisation levels, error can occur if the
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
10/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
sina1 is at its maximum or minimum value for significant time intervals. Figure 1.17 shows howa continuous-time signal is quantised in a quantiser that has 16 quantising levels
11. What is meant by sampling? State sampling theorem?
Ans:
Sampling a signal is the process of acquiring its values only at discrete points in time.
Sampling is a process by which a continuous-time signal is converted into a discrete time signal.
Sampling by Impulse Function
The sampling function g(t), discussed above, was periodic. The pulse width of the sampling
function must be very small compared to the period, T. The samples in digital systems are in theform of a number, and the magnitude of these numbers represent the value of the signal x(t) at
the sampling instants. In this case, the pulse width of the sampling function is infinitely small
and an infinite train of impulse functions of period T can be considered for the sampling function.That is,
The sampling function as given in Eq.1.49 is shown in Fig.1.14. When this sampling function isused, the weight of the impulse carries the sample value.
The sampling function g(t) is periodic and can be represented by a Fourier series as in Eq.L41,which is repeated here.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
11/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
12/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
12. What is meant by quantisation and encoding?
Ans:
A discrete-time signal with continuous-valued amplitudes is called a sampled data signal,
whereas a continuous time signal with discrete-valued amplitudes is referred to as a quantisedboxcar signal.
Quantisation is a process by which the amplitude of each sample of a signal is rounded off to thenearest permissible level. That is, quantisation is conversion of a discrete time continuous-
amplitude signal into a discrete-time, discrete-valued signal. Then encoding is done byrepresenting each of these permissible levels by a digital word of fixed wordlength.
The process of quantisation introduces an error called quantisation error and it is simply the
difference between the value of the analog input and the analog equivalent of the digitalrepresentation. This error will be small if there are more permissible levels and the width of
these quantization levels is very small. In the analog-to-digital conversion process, the onlysource of error is the quantiser. Even if there are more quantisation levels, error can occur if the
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
13/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
sina1 is at its maximum or minimum value for significant time intervals. Figure 1.17 shows howa continuous-time signal is quantised in a quantiser that has 16 quantising levels.
13. Write down the trigonometric form of the Fourier series representation of a
periodic signal.
Ans:
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
14/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
14. Write a note on Dirichlets conditions.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
15/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
Ans:
\
15. State and prove Parsevals theorem for Fourier transform.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
16/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
16. Explain the following properties of Fourier Transform
i. Linearity
ii. Symmetry
iii. Scaling
Ans:
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
17/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
18/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
17. Find the Fourier transform of Unit Step Function.
Ans: Refer your notebook for the answer to this question
18. Determine the Fourier transform of Signum function & also plot the amplitude and
phase spectra.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
19/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
19. Obtain exponential Fourier series for the following waveform,
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
20/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
21/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
20. Simple Problems to be solved for finding
i. Whether given signal is periodic or not
ii. Whether given signal is energy or power signal etc
Ans: Refer your notebook for the sample problems to this question
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
22/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
Unit II:
1. State and explain Laplace Transform and its inverse transform.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
23/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
2. What is region of convergence?
3. Find the Laplace transform of
i. Unit step function
ii. Sine function
iii. Cosine function
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
24/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
v. Rectangular pulse
vi. Sawtooth pulse
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
25/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
v. Rectangular pulse
vi. Sawtooth pulse
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
26/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
4. Discuss initial value and final value theorems in Laplace transform domain.
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
27/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
5. Find Laplace transform of the periodic rectangular wave form with period 2T
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
28/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
6. Find Laplace transform of the periodic sawtooth waveform with period of one cycle
T
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
29/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
7. State any five properties of Laplace transform.
Ans: Refer your notebook for answer this question
8. Obtain Laplace transform for step and Impulse Responses of
i. Series R-L Circuit
ii. Series R-C Circuit
Ans:
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
30/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
31/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
32/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
33/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
34/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
9. Define the network transfer function & explain how to obtain output impulse & step
response using transfer function.
Ans: Network transfer function is given by
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
35/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
10. Determine poles, zeroes of F(s) & plot them graphically. Also obtain f(t) if
http://www.bepioneer.com/http://www.bepioneer.com/7/30/2019 DSS - QB Solutionss Part 1
36/36
Ideal for B.Sc.IT / Com. Sci. www.bepioneer.com 9920812021 / 2808 2086
Simple Problems to be solved
Ans: Refer your notebook for answer this question
Admission for 2013-14 BSC IT, BSC Comp. Sci. Classes started
at ANDHERI, BORIVALI, VASAI. More early you come more
benefit in fees. Best result in 2012-13. Best team of professor.
http://www.bepioneer.com/http://www.bepioneer.com/