Upload
renspur
View
220
Download
0
Embed Size (px)
Citation preview
8/8/2019 DSM Instructions v5p1
1/20
8/8/2019 DSM Instructions v5p1
2/20
Alternate Languages ..................................................
Introduction ................................................................
Benets.......................................................................
DSM Digital SpreadSpectrum Modulation .................
Installation Instructions ...............................................
Installing theTransmitter Module ................................
Installing the Receiver ................................................
Binding .......................................................................
Binding Process .........................................................
Specications .............................................................
FCC Inormation .........................................................
Warranty and Service Inormation ..............................
Table of Contents
8/8/2019 DSM Instructions v5p1
3/20
ITALIAN: Per la versione italiana di questo ma
www.spektrumrc.com
FRENCH: Pour consulter ce manuel en rana
GERMAN: Zur Ansicht der Bedienunsanleitung
www.spektrumrc.com
SPANISH: Para ver este manual en Espaol en
Alternate Languages
8/8/2019 DSM Instructions v5p1
4/20
Spektrums Digital Spectrum Modulation (DSM) syste
link security. No longer do you have to worry about tr
unintentionally being turned on, waiting or the reque
caused rom noisy motors, speed controllers or othe
utilizes Digital Spread Spectrum technology providin
Operating within the ultra high requency 2.4GHz wo
module is programmed at the actory with its own un(Globally Unique Identication code). Once a receive
(called binding), the receiver will only recognize that
other sources. And with over 4 billion possible GUID
receiver to listen to anything other than its bound tran
The DSM system is telemetry-ready or optional telem
Engine temperature, speed, rpm, signal strength, ba
displayed in real time via Spektrums handheld displa
be updated periodically to include a wide variety o p
Introduction
8/8/2019 DSM Instructions v5p1
5/20
Eliminates the possibility o intererence rom an un
Impervious to model-generated RF intererence (lik
metal-to-metal noise, etc.)
Robust intererence rom any outside sources like o
pagers, WiFi systems, etc.
No more waiting or an open requency
Eliminates the need or a requency board and req
Fail-sae drives the servos to a preset position (usu
event o signal loss
No need to impound transmitters at events
The DSM system is available or all popular module
2.4GHz worldwide band allows international use
Short 8.5" receiver antenna is easy to mount
Telemetry-ready optional modules allow real time
speed, battery voltage, lap times, etc.
No maintenance or tuning required (always stays in
No need or crystals
Up to 79 users can simultaneously operate DSM sy
FCC, UKCC, ROAR, NORCCA and ETSI approved
Benefts
8/8/2019 DSM Instructions v5p1
6/20
The DSM system operates in the 2.4GHz band (thats
oers a signicant advantage as its well out o the ra
intererence (like motor and ESC noise). All the comp
and 75MHz radios with model-generated interering
The DSM system uses Direct Sequence Spread Spe
wide signal on a single requency. The FCC requires
incorporating collision avoidance such that when a s
2.4GHz band and selects a channel that is not being
that unused channel. 79 channels are available and
system interering with another are astronomically re
capacity o 79 channels. In the unlikely event that the
not connect or cause any intererence, going into ho
DSM
Digital Spread
Spectrum Modulation
8/8/2019 DSM Instructions v5p1
7/20
During rst installation, the receiver(s) must be boun
is necessary to program the receiver(s) to distinguish
others. Also ail-sae positions are transerred rom th
binding. See binding below or more details.
1. Make sure that the transmitter is switched o.
2. Remove t
current R
module r
the transm
3. Careully insert
the DSM modulenoting the
orientation o the
connector pins.
Installation
Instructions
Installing the Transmitter
Module
8/8/2019 DSM Instructions v5p1
8/20
5. I the transmitter is PPM and PCM compatible, ma
to PPM modulation mode. I necessary, see the in
system or details.
Note: When using the Futaba 3PK, its nece
the standard PPM mode and not the HRS m
4. Rotate and angle
the antenna on
the module to
vertical.
Installing the
Transmitter Module(continued)
8/8/2019 DSM Instructions v5p1
9/20
1. Using double-
sided oam tape
mount the recei
in the position
recommended
in your vehicles
instructions.
2. At 8.5 inches in length, the receiver antenna is sig
conventional antennas. The receiver has provisio
the top o the receiver or at the end o the receive
necessary to open the case to change the antenn
its important to mount the antenna vertically. In m
mounted inside the body with no loss o range. Mrecommended by the manuacturer o the vehicle
to trim the plastic antenna tube (included with yo
extend at least 1/2" past the tip o the tube.
Installing the
Receiver
8/8/2019 DSM Instructions v5p1
10/20
Note: I desired, the antenna can be shorte
to exactly 3.6" with negligible loss o range a
applications the short 3.6" length will make i
3. Connect the servo a
leads per the chart
connections are co
Airtronics Z, JR, F
and KO servos.
Installing the
Receiver(continued)
10
8/8/2019 DSM Instructions v5p1
11/20
Receiver Channel Usage
Port 1 Battery and telemetry options
Port 2 CH1 Steering
Port 3 CH2 Throttle
Port 4 CH3 Auxiliary channel or personal transpond
Note: Align the servo leads so the black wi
the outside edge o the receiver case.
Channel Assignments
8/8/2019 DSM Instructions v5p1
12/20
Its necessary to program the receiver to a specic m
recognize that module, ignoring signals rom any oth
bound to a module, the system will not operate. Also
ail-sae positions are set.
It is only necessary to bind the receiver to the module
recommended when the receiver is moved rom one
be re-bound to the same module or to other modules
unlimited number o receivers can be bound to a sin
using one transmitter to operate several models.
1. Make sure the transmitter and receiver are turned
2. With the receiver o, press and hold the bind butto
the receiver.
3. Turn on the receiver while holding the bind button4. Release the bind button when the LED fashes gre
Binding
Binding Process
1
8/8/2019 DSM Instructions v5p1
13/20
5. With the transmitter o, place the transmitter stick
desired ail-sae positions, normally brake and str
6. Press and hold the bind button
transmitter module.
7. Turn on the transmitter while ho
the bind button.
8. Release the bind button ater th
LED fashes.
Observe that ater several seconds the LED on the re
transmitter will quit fashing and remain solid, indicat
was successul. Once binding is complete, the syste
Only bound receivers and modules can connect. Duscans or a ree channel while the receiver scans or
scanning, the LEDs on both transmitter and receiver
binding is achieved, the LED remains on continuous
Binding Process(continued)
8/8/2019 DSM Instructions v5p1
14/20
In the unlikely event that the link is lost during use, th
their ail-sae positions that were preset during the bi
turned on prior to turning on the transmitter, the rece
driving the servos to their preset ail-sae position. W
normal control is resumed.
Note: The ail-sae positions can be checke
o on the transmitter. The green LED on the the servo/ESC will be driven to their stored a
Loss of Link / Fail Safe
1
8/8/2019 DSM Instructions v5p1
15/20
Specifcation Range
Frequency Band 2.4002.4835
Channels 79
Channel Spacing 1
Chips/Bits 64
DSSS Coding Gain 18
Bitrate 15.625
Range 3000
Latency
Standard System 5.6
Pro Series System 3.0
Resolution/Channel 4096
Specifcations
8/8/2019 DSM Instructions v5p1
16/20
Specifcation Range
Output Power 10
Antenna 2
Modulation Digital GFSK
160kHz dF
Sensitivity -98
RC Channels 3
Power 40
Weight 11
Transmitter
Receiver
Specifcations(continued)
1
8/8/2019 DSM Instructions v5p1
17/20
This device complies with part 15 o the FCC rules. O
ollowing two conditions: (1) This device may not cau
(2) this device must accept any intererence received
cause undesired operation.
Caution: Changes or modications not exp
approved by the party responsible or comp
void the users authority to operate the equipThis product contains a radio transmitter with wireles
and ound to be compliant with the applicable regula
the 2.400GHz to 2.4835GHz requency range.
The associated regulatory agencies o the ollowing
certications or this product as authorized or sale a
USA Canada
Denmark France
Germany Italy
Spain Sweden
FCC Information
8/8/2019 DSM Instructions v5p1
18/20
Spektrum 1-Year Warranty
This Spektrum product is guaranteed against work
deects or a period o 1 year rom the original date o
to the original purchaser and cannot be transerred.
except those that have been modied, misused, imp
unauthorized service center. As with all ne electroni
extreme temperatures, humidity, moisture, or exposu
time.
I you have any questions about the operation or inst
ree to call a product support representative at 1-877
I your equipment needs to be repaired, ship it to:
Horizon Service Ce
ATTN: Spektrum Se
4105 Fieldstone R
Champaign, IL 61
Warranty and Service
Information
1
8/8/2019 DSM Instructions v5p1
19/20
Include your complete name and address inormatio
on the outer label/return address area. Include a brie
correspondence and be sure that your name and ad
receive warranty service, you must include your orig
o-purchase date. Providing warranty conditions hav
repaired at no charge or replaced at the discretion o
Warranty and Service
Information(continued)
8/8/2019 DSM Instructions v5p1
20/20