2
[email protected] +44(0)1702 443810 mcldatasolutions.co.uk Wall-Box Fibre Optic Enclosures WBF6-24 Series Steel Construction Up to 24-Way Lockable Double Door Separate Splice / Patch Areas Four Cable Entries Built-In Fibre Management Multiple Connector Options The MCL wall boxes can be supplied either unloaded ready for the installer to load or pre-loaded with adaptors and pigtails ready for installation. For maximum flexibility to the end user, these boxes are available for a wide selection of connector styles and offer easy access during installa- tion or subsequent reconfiguration without disturbing already-installed fibre. These boxes may also be fitted with a wide range of cable glands to suit the diverse cable constructions encoun- tered. Pigtails are available in singlemode and all multimode classes from OM1 to OM4. The WBF6-24 fibre panel is a two-door, low-profile, economical wall-mounted splice and patch enclosure offering up to 24 fibre presentations in the MCL Wall Box range. It contains built-in fibre management and is supplied with a 24-Way splice cassette for securing spliced fibre. Also fitted are fibre glands and strength-member support for securing incoming plant cable and rub- ber grommets for patch cord entry. Optional Accessories Singlemode and Multimode pigtails in many connector styles Bulkhead adaptors Splice Support Sleeves Alternative Cable Glands Patch cords

Ds wbf6 24-series

Embed Size (px)

Citation preview

Page 1: Ds wbf6 24-series

���� � ���� [email protected] +44(0)1702 443810 mcldatasolutions.co.uk

Wall-Box Fibre Optic Enclosures WBF6-24 Series

• Steel Construction

• Up to 24-Way

• Lockable Double Door

• Separate Splice / Patch Areas

• Four Cable Entries

• Built-In Fibre Management

• Multiple Connector Options

The MCL wall boxes can be supplied either unloaded ready for the installer to load or pre-loaded with adaptors and pigtails ready for installation. For maximum flexibility to the end user, these boxes are available for a wide selection of connector styles and offer easy access during installa-tion or subsequent reconfiguration without disturbing already-installed fibre. These boxes may also be fitted with a wide range of cable glands to suit the diverse cable constructions encoun-tered. Pigtails are available in singlemode and all multimode classes from OM1 to OM4. The WBF6-24 fibre panel is a two-door, low-profile, economical wall-mounted splice and patch enclosure offering up to 24 fibre presentations in the MCL Wall Box range. It contains built-in fibre management and is supplied with a 24-Way splice cassette for securing spliced fibre. Also fitted are fibre glands and strength-member support for securing incoming plant cable and rub-ber grommets for patch cord entry. Optional Accessories � Singlemode and Multimode pigtails in many connector styles � Bulkhead adaptors � Splice Support Sleeves � Alternative Cable Glands � Patch cords

Page 2: Ds wbf6 24-series

MCL Data Solutions, Network House, Journeymans Way, Temple Farm Business Park, Southend-on-Sea, Essex, SS2 5TF, United Kingdom

Door

Plant Cable Gland

Rubber Gasket

Strength Member Support

Cable

Anchor Fibre

Circuit

24-Way

Cassette

Splice Support Bridge

Bridge Cover

Hinge

Bulkhead Adaptors

Lock

Door

Tie Loop

M6 Fixing Hole

Patch Cord Entry Grommet

Schematic Drawing

Technical Specification

Material: Mild Steel. Operation Environment: Indoor. Environmental Temperature: -25 to +40C Environmental Humidity: <85% Fixing: Four M6 Holes on 295mm (horizontal) and 245mm (vertical) centres Dimensions (mm): (w x d x h) 425 x 55 x 325

Ordering Information

WBF624 - - -

E2 E2000 FC FC

E2A E2000 Angled* FCA FC/APC (Angled)*

SC SC LC LC

SCA SC Angled* ST ST

(*Only available in singlemode)

Connector / Adaptor Type Number of Ports

04

08

12

16

24

9 Singlemode

62 Multimode OM1

50 Multimode OM2

53 Multimode OM3

54 Multimode OM4

Mode

Example Part No: WBF624-SC-9-24 This would be a unit fitted with 24 singlemode SC adaptors and pigtails.