Ds Ply Cb Net Section

Displays,Cabinets&Indexes

127

Displays, Cabinets & Indexes

Proudly Manufactured in the U.S.A •America’s Finest High Speed Steel Cutting Tools • Call Toll Free

www.vikingdrill.com 1.800.328.4655

Carbide Holecutter DisplayType CHC-UB. . . . . . . . . . . . . . . . . . 138Type CHD-UB. . . . . . . . . . . . . . . . . . 138

Tap & Die CountertopsTap & Round Die . . . . . . . . . . . . . . . 136Tap & Hex Die . . . . . . . . . . . . . . . . . 136

Ultra Bor Super Premium53-SF . . . . . . . . . . . . . . . . . . . . . . . . 13655-SP . . . . . . . . . . . . . . . . . . . . . . . . 136

Tap & Drill AssortmentsSuper Premium67-SP . . . . . . . . . . . . . . . . . . . . . . . . 137123-SP . . . . . . . . . . . . . . . . . . . . . . . 137123-SF . . . . . . . . . . . . . . . . . . . . . . . 137

Drawer-Mount DispensersType 913Fractional, Wire, Letter & Empty. . . . . . . 132

Drill StandType 913 Letter, Fractional & Wire . . . . . 135

IndexesType 901 Indexes Only . . . . . . . . . . 139Type 901 Black Indexes - ID Plate Slot . . 140

Master Drill DispensersType 913 U.S. & Metric Sizes . . . . . 133

Master Tap DispensersType 913 . . . . . . . . . . . . . . . . . . . . . 134

Silver & Deming Drill DispensersType 913. . . . . . . . . . . . . . . . . . . . . . 132

Stocking CasesType 92513 pcs. Silver & Deming . . . . . . . . . 13172 pcs. Letter . . . . . . . . . . . . . . . . 13191pcs. Metric . . . . . . . . . . . . . . . . 13196 pcs. Fractional . . . . . . . . . . . . . 131249 pcs. Wire . . . . . . . . . . . . . . . . . 131

Annular Cutter Sets . . . . . . . . . . 130

Counter DisplaysAnnular Cutter . . . . . . . . . . . . . . . . . 129Reamers . . . . . . . . . . . . . . . . . . . . . 130Type 50-UB & Type 51-UB

Silver & Deming . . . . . . . . . . . . . . . . 129

Stock Master Dispensers& DisplaysType 925 300pcs. Fractional . . . . . . 128

Display PackagesType 250-UB . . . . . . . . . . . . . . . . . . 138

Type CHC-UB & CHD-UB . . . . . . . . 138

Drill GaugesType 913 Letter, Fractional & Wire . . . 135

Type 240-UB

Display,Cabinets&Indexes-StockMasterDispensers&Display

128


STOCK MASTER DISPENSERS & DISPLAYS

Type 925Fractional Drills - 300 Piece Assortment

• Assortment is complete with lexan front displaypictured on the left side of this page.

• Case stocks 29 fractional sizes -1/16" thru 1/2 " by 64ths- each size in a separate compartment.

• Individual compartments are plainlymarked with drill sizes.

• Drills will be attractively displayed yet securewith the lexan locking cover.

CCoouunntteerr TToopp DDiissppllaayy aarree aavvaaiillaabbllee ssttoocckkeeddwwiitthh TTyyppee 224400--UUBB,, 225500--UUBB,, 224400--DD,, 224400--AA,, 224400,, 224400--BB oorr 224400--GGFF ddrriillllss..



Assortment DrillPart No. No. Type06490 300-SP 240-UB06520 300-HD 240-A54720 300-BR 240-B54750 300-BL 24057640 300-SPM 250-UB57641 300-RSPM 250/258-UB68460 300-D 240-D40632 300-GF 240-GF

FractionalNo. of Drills Size

24 1/1612 5/6424 3/3218 7/6448 1/818 9/6418 5/3212 11/6424 3/166 13/6412 7/326 15/6424 1/46 17/646 9/322 19/646 5/162 21/643 11/322 23/646 3/82 25/642 13/322 27/643 7/162 29/642 15/322 31/646 1/2

Total 300

Qty.Part No. Description per/pack58350 Replacement Lock & key 1

DDIISSPPLLAAYY OOnnllyyPPaarrtt ##4455001100

Type 250-UB

Type 240

300 PCS. ASSORTMENT EACH. DISPLAY CONTAINS:

ACCESSORIES

Black & Gold


Display, Cabinets & Indexes - Silver & Deming / Annular Cutters

129


SILVER DEMING DISPLAY

Silver & Deming Drills• Compact Lexan case attractively displays S&D drills.• Scratch proof Lexan front reduces pilferage and keeps merchandise clean.



Contents Part No. 00940 No. of EachType 280-UB 9/16, 5/8, 11/16, 3/4, 1

13/16, 7/8, 15/16 & 1”

DISPLAY CONTENT1 of each, 1/2, 9/16, 5/8, 11/16,3/4, 13/16, 7/8, 15/16, 1”, 1-1/16 by 1” depth and same sizes asabove by 2” depth. Both include five pins.

Part No. Size/Type00943 SB-20 /15 & 15L00944 SB-20HS /14 & 14L00949 SB-20SP/13SP & 13LSP

SILVER & DEMING COUNTER DISPLAY

ANNULAR CUTTERS COUNTER DISPLAY


LEXAN COUNTER - ANNULAR CUTTERS DISPLAYS

Annular Cutters• Compact metal case attractively displays annular cutters.• Scratch proof Lexan front reduces pilferage and keeps merchandise clean.

CR8SPA

Display, Cabinets & Indexes - Reamer Display & Annular Cutter Sets

130


REAMER COUNTER DISPLAY

Type 50-UB -Standard Flute & Type 51-UB -Fast SpiralReamers

• Compact case attractively displays reamers.• Scratch proof Lexan front reduces pilferage and keeps merchandise clean.



SPIRA-BROACH™ ANNULAR CUTTERS• These unique cutters reduce time and power requirements by cutting larger diameter holes as a ring to produce a solid slug.

• The effort required is a fraction what is needed whenusing a twist drill or indexable tooling.

SSPPIIRRAA--BBRROOAACCHH™™AAnnnnuullaarr CCuutttteerrss• Give the lowest cost per hole

• Cut on curved surfaces

• Leave a burr-free hole

• Use less power

• Allow overlapping cuts on existing holes

• Stay sharp much longer

No. of Part# Type Contents Each

00941 CR8SPA 50-UB 3/8, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 1” 100942 CR8FSA 51-UB 3/8, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 1” 1

Display Only Part #00934

Part No. Type Components15301 M-42 15 1" Pin, 9/16, 11/16, 13/16, 15/16 & 1-1/1616901 M-35 14 1" Pin, 9/16, 11/16, 13/16, 15/16 & 1-1/1616624 M-2 13SP 1" Pin, 9/16, 11/16, 13/16, 15/16 & 1-1/16

Part No. Type Components15302 M-42 15L 2" Pin, 9/16, 11/16, 13/16, 15/16 & 1-1/1616902 M-35 14L 2" Pin, 9/16, 11/16, 13/16, 15/16 & 1-1/1616629 M-2 13LSP 2" Pin, 9/16, 11/16, 13/16, 15/16 & 1-1/16

SB-5 2" LENGTHSB-5 1" LENGTH

Black & Gold

Display, Cabinets & Indexes - Fraactional,Wire, Letter, Metric Assortments

131


STOCKING CASES, FRACTIONAL, WIRE, LETTER, METRIC & SILVER DEMING ASSORTMENT

Type 925Closed Drawer All-Steel Stocking UnitsStocking cases for Fractional, Wire Gauge, Letter, Metric, and Silver & Deming drills.



Assortment DrillPart No. No. Type06500 96-SP 240-UB16010 96-HD 240-A37270 96-SPM 250-UB54690 96-BR 240-B54760 96-BL 24068440 96-D 240-D37271 96-RSPM 250/258-UB

DrillPart No. Assortment No. Type16030 249-HD 240-A35070 249-SP 240-UB54700 249-BR 240-B54770 249-BL 240

DrillPart No. Assortment No. Type16020 72-HD 240-A35080 72-SP 240-UB54710 72-BR 240-B54780 72-BL 240

Drill Size - Contains Quantity1/16, 3/32, 1/8, 5/32,11/64, 3/16, 7/32 & 1/4 6 each

5/64, 7/64, 9/64, 13/64, 15/64, 9/32, 5/16, 11/32 3 each

17/64, 21/64, 23/64, 3/8,25/64,13/32, 27/64, 7/16 & 29/6415/32 & 1/2 2 each

19/64 & 31/64 1 each

Drill Size - Contains Quantity

1-22 3 each23-29 4 each30-60 5 each

Drill Size - Contains QuantityA-T 3 eachU-Z 2 each

CABINET ONLYFractional Sizes: Part #44920Wire Sizes: Part # 44930Letter Sizes: Part # 44940Metric Sizes: Part # 08930

Silver & Deming: Part # 43203

DrillPart No. Assortment No. Type18910 91-SP 643-UB

DDrriillll SSiizzee - Contains QQuuaannttiittyy

2.5, 3.5, 4.5, 5.0, 5.5, 6.0 & 6.5 5 each1.5, 2.0, 3.0, 7.0, 8.0 & 8.5 4 each1.0, 4.0, 9.0, 9.5, 10.0, 10.5, 11.0 & 12.0 3 each7.5, 11.5, 12.5 & 13.0 2 each

DrillPart No. Assortment No. Type43202 S&D 13 28092402 S&D 13-SP 280-UB

Drill Size - Contains Quantity9/16 & 5/8 33/4 211/16, 13/16, 7/8, 15/16 & 1" 1

Fractional & Metric Sizes = 3 DrawersWire Sizes = 5 Drawers

Letter Sizes = 3 DrawersSilver & Deming = 4 Drawers

FRACTIONAL DRILLS

FRACTIONAL DRILLS - 96PCS. ASSORTMENT

LETTER DRILLS

SILVER & DEMING

METRIC DRILLS - 91 PC. ASSORTMENT

METRIC DRILLS

SILVER & DEMING - 13PCS. ASSORTMENT

WIRE GAUGE DRILLS - 249 PC. ASSORTMENT

WIRE GAUGE

LETTER DRILLS - 72 PC. ASSORTMENT

Display, Cabinets & Indexes - Silver & Deming Drill Dispensers

132


SILVER & DEMING DRILL DISPENSERSType 913



DRAWER-MOUNT DRILL ORGANIZERType 913

Drawer-MountThe latest thing in organizing, sorting, storing, and securing your cutting tools.

The outer shell can be mounted underneath a work bench, desk, shelf, inside a cabinet, or just about anywhere. The drawer has a cam-lock to keep

your cutting tools safely locked away.

• Workbench-space-saver.

• Out-of-the way convenience.

• Security-Built in cam lock and two keys.

• Heavy-duty ball bearing drawer slides.• Time-saving Cutting tools are stored away in their proper locations making it fast and easy to find the right tool.

• Each space clearly marked for the proper tool.

• Decimal equivalent shown under each size tool.

Dimensions Qty.Part No. Inches Weight per/pack00950 14-5/8 W x 7-3/8 D x 7-3/4 H 13-1/4 lbs. 1

Dimensions Qty.Part No. Inches Weight per/pack00951 14-5/8 W x 7-3/8 D x 7-3/4 H 10-3/4 lbs. 1

Holds: 2 each Reduced Shank S & D bits from 33/64ths to 63/64ths by 64ths.

Holds: 2 each Reduced Shank S & D bits from 1, 1-1/32, 1-1/16, 1-1/8, 1-5/32, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16 & 1-1/2.

OOvveerraallll DDiimmeennssiioonnss:: 26-1/8 W x 12-1/2 D x 4-1/2 H

DDrraawweerr DDiimmeennssiioonnss:: 23-1/8 W x 11 D x 3 H

SShhiippppiinngg WWeeiigghhtt:: 14-1/2 pounds

PART NO. 01021 PART NO. 01023

HUOT MODEL 13167HUOT MODEL 13166

HHuuoott MMooddeell 3300005500 For Letter Drills from A to Z

HHuuoott MMooddeell 3300000000 For Fractional Drills 1/16 to 1/2 x 64ths.

PART NO. 01022

HHuuoott MMooddeell 3300002255 For Wire Gauge Drills #1 to #60.

PART NO. 01024

HHuuoott MMooddeell 3300000011 Empty drawer-mount drawer, no dividers for miscellaneous storage space.

Display, Cabinets & Indexes - Master Drill Dispensers

133


MASTER DRILL DISPENSERS



• Cost effective tool management and storage

• Safest way to store sharp tools• Fast inventory tracking• Eliminates wasted searching• Helps prevent losing or damagingtools

• See tool inventory at a glance• 100% U.S.A. made!

Easy-to-read,permanent,durableidentification stripsshow tool sizeand decimalequivalents!

Baked, Epoxy finish for long life

Stackable models,full drawerextension slides

Exclusive, patentedGlydex® slides on Master Series

Lockable modelsHeavy gaugefabricated steel cabinetand drawers

Type 913MMaasstteerr DDrriillll DDiissppeennsseerrss ((UU..SS.. aanndd MMeettrriicc SSiizzeess))FFeeaattuurree::• All steel cabinet with vinyl dividers to help protect and separate bits.

• Each cabinet is lockable with its own set of 2 keys.

• Each drawer measures 23-1⁄8" wide; 11" front to back.

• Stackable for larger inventories at one location.

• Lower drawer is undivided for extra long drills, reamers, and miscellaneous tools.

• Drawer Divider Kit available for lower drawer.

UU..SS.. SSiizzeessPPaarrtt NNoo.. 0000668822Holds full packages (minimum of 12 pcs.) of jobber or screw machine length drills, fractional, letter, and wire gauge sizes in one complete cabinet.

• Top drawer holds fractional drills 1⁄16" to 1⁄2" by 64th with 42 compartments.

• 2nd drawer is for #1 to #60 wire gauge with 75 compartments.• 3rd drawer for letter size A to Z with 42 compartments.

MMeettrriicc SSiizzeessPPaarrtt NNoo.. 0000668811Holds metric drills from .35mm to 13.00mm.

Sizes include: .35mm to 2.50mm by .05mm, 2.6mm to 10.0mm by .1mm, 10.2mm, 10.5mm, 10.8mm, 11.0mm, 11.2mm, 11.5mm, 11.8mm, 12.0mm, 12.2mm, 12.5mm, and 13.0mm.

138 compartments to store and inventory all your metric drill bits. Same great features as our #00682 jobber length master cabinet.

Dimensions Qty.Part No. Inches Weight per/pack00682 26" W x 12" D x 12 - 1⁄2" H 43 lbs. 1


HUOT MODEL 13175 - U.S. SIZE DRILLS

HUOT MODEL 13180 - METRIC SIZE DRILLS

Display, Cabinets & Indexes - Master Tap Dispensers

134


MASTER TAPS DISPENSERS

Type 913• Holds most common NC/NF sizes from 1⁄4" to 1-1⁄2".• Holds metrics from 2.5 mm to 30 mm.• Holds machine screw size 2-56 thru 12-28, taper, plug, bottom, and spiral.

• Extruded vinyl drawer dividers protect taps.• Top drawer has 40 compartments.• Second drawer has 78 compartments.• Third drawer has 21 compartments.• Fourth drawer has 13 compartments.• Stackable for larger inventories.• Lockable.

Part # 01321



MASTER TAPS DISPENSERS

Type 913• Holds all sizes of National Pipe taps (NPT) from 1/16 to 2.

• Top drawer has 13 compartments measuring 3/4 W x 7/8 H x 4-1/2 D.

• 2 compartments for 1/16-27, 2 for 1/8-27, 3 for 1/4-18, 3 for 3/8-18 and 3 for 1/2-14.

• Middle drawer has 9 compartments for 3 for 3/4-14, 3 for 1-11-1/2, 3 for 1-1/4-11-1/2.

• Bottom drawer has 7 compartments measuring 1-3/4 W x 2 H x 7 D.

• 3 compartments for 1-1/2-11-1/2 and 1 large compartment for 2-11-1/2

Part # 01323

PPaarrtt ## 0011332222For sizes 1⁄4"-20 to 1"-14 taps Many compartments hold multiples of a given size tap.

HHoollddss bboottttoomm,, pplluugg aanndd ttaappeerr ooff eeaacchh ssiizzee::1⁄4"-20 1⁄4"-28 5⁄16"-18 5⁄16"-24 3⁄8"-16 3⁄8"-247⁄16"-14 7⁄16"-20 1⁄2"-13 1⁄2"-20 9⁄16"-12 9⁄16"-185⁄8"-11 5⁄8"-18 3⁄4"-10 3⁄4"-16 7⁄8"-9 7⁄8"-141"-8 1"-14

HHoollddss ttaappeerr,, pplluugg,, bboottttoomm aanndd ssppiirraall:2-56 3-48 3-56 4-40 4-48 5-405-44 6-32 6-40 8-32 8-36 10-24 10-32 12-24 12-28

Part # 01324Holds Metric,Taps, Drills and Dies.

From 2.5 x .45 tap to 12.0 x 1.75 tap and holds the following sizes:

• Top drawer holds 2.5 x .45 tap - 2.05 drill dies, 3.0 x .50 tap-2.50 drill - dies, 3.5 x .60 tap - 2.90 drill - dies, 4.0 x .70 tap -3.30 drill-dies.

• Middle drawer holds 5.0 x .80 tap -4.20 drill-dies, 6.0 x 1.00 tap - 5.00 drill-dies, 8.0 x 1.25 tap - 6.70 drill-dies.

• Bottom drawer holds 10.0 x 1.50 tap - 8.50 drill-dies, 12.0 x 1.75 tap - 10.20 drill-dies.

• Room in top drawer for your T-handle wrench.

Qty.Part No. Description per/pack01323 National Pipe Taps (NPT) 1

Qty.Part No. Description per/pack01324 Taps, Drill & Dies 1



HUOT MODEL 13560

HUOT MODEL 13595

HUOT MODEL 13585

HUOT MODEL 13580

Display, Cabinets & Indexes - Drill Stands & Gauages

135


DRILL STANDS

Type 913

• These drill stands can be hung on a wall, used on a bench, or mounted on a press.

• Durably made from a single piece of prime steel, rigidly formed.

Part # 01011Letter sizes A to Z inclusive

Part # 01012 Fractional drills 1⁄16" to 1⁄2" by 64ths inclusive

Part # 57430Silver & Deming drills from 1/2-1 by 64ths. Held by shank.



DRILL GAUGES

Type 913• Economical gauge made from prime steel and finished.

Part # 58520For measuring 1 ⁄16" to 1 ⁄2" by 64ths drill bits.

Part # 58522For measuring #1 to 60 wire gauge drill bits.

Part # 58521For measuring drills 1 ⁄2 " to 1 " by 64ths.

Dimensions Qty.Part No. Inches per/pack01011 5-5⁄8" W x 2-5⁄8" D x 1-1⁄2" H 1

Dimensions Qty.Part No. Inches per/pack01012 5-5⁄8" W x 2-5⁄8" D x 1-1⁄2" H 1

Dimensions Qty.Part No. Inches per/pack57430 13" W x 5" D x 2" H 1

Part # 58521

Dimensions Qty.Part No. Inches per/pack58520 6" W x 3" D 1

Dimensions Qty.Part No. Inches per/pack58522 5-1⁄4" W x 2" D 1

Dimensions Qty.Part No. Inches per/pack58521 13" W x 5" D 1

HUOT MODEL 12250 PART #58520




HUOT MODEL 11900 PART #01012HUOT MODEL 11985 PART #57430

136

Displays, Cabinets & IndexesBlack & Gold



DDIISSPPLLAAYY OONNLLYY##4455000000

Display, Cabinets & Indexes - Stocked Counter, Tap & Die Countertop

STOCKED COUNTER DISPLAYS• Compact metal case attractively displays complete assortment of taps, dies, and wrenches.• Locking scratch proof Lexan front reduces pilferage and keeps merchandise clean.• Broad range of sizes. Practically all customers can be served with small investment.• Price strips furnished on each display for quick reference at point of sale• Furnished with hex or round dies.

Part # 50010 - Display with Round Dies

Part # 50210 - Display with Hex Dies

TAP & DIE COUNTERTOP

Ultra Bor Super PremiumSuper Premium Tap & Die Counter TopDispenser 53 Piece, Straight Flute Taps & Hex Dies

53-SF Assortment contains:Super premium straight flute plug tap sizes:

3 each 6-32, 8-32, 10-24, 10-32 & 1/4-20; 2 each 5/16-18, 3/8-16, 7/16-14 & 1/2-13; 1 each 4-40, 12-24, 1/4-28, 5/16-24, 3/8-24, 7/16-20,

1/2-20, 9/16-12, 5/8-11 & 3/4-10.

Super premium hex die sizes:1 each 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-28,

5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 5/8-11 & 3/4-10;

2 each 1/4-20.

Includes glass front stocking cabinet.

PART # 35150

Super Premium Tap & Die Counter TopDispenser 55 Piece, Spiral Point Taps & Hex Dies

55-SP Assortment contains:

Super premium spiral point tap sizes:

3 each 6-32, 8-32, 10-24, 10-32 & 1/4-20; 2 each 5/16-18, 3/8-16, 7/16-14 & 1/2-13; 1 each 4-40, 12-24, 1/4-28, 5/16-24, 3/8-24, 7/16-20,

1/2-20,5/8-11, 5/8-18, 3/4-10 & 3/4-16.Super premium hex die sizes:

1 each 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-

20, 1/2-13, 1/2-20, 5/8-11, 5/8-18, 3/4-10 & 3/4-16;2 each 1/4-20. Includes glass front stocking cabinet.

PART # 35160

Contents Size No. of EachPlug Tap 1/4-20 NC 6

1/4-28 NF 65/16-18 NC 65/16-24 NF 63/6-16 NC 63/8-24 NF 67/16-14NC 67/16-20NF 61/2-13 NC 61/2-20 NF 69/16-12NC 69/16-18NF 65/8-11NC 65/8-18NF 63/4-10NC 63/4-16NF 64-40NC 126-32NC 128-32NC 1210-24NC 1210-32NF 1212-24NC 12

Pipe Tap 1/8-27NPT 6Round or Hex Die 1/4-20NC 3

1/4-28NF 35/16-18NC 35/16-24NF 33/8-16NC 33/8-24NF 37/16-14NC 37/16-20NF 31/2-13NC 31/2-20NF 39/16-12NC 39/16-18NF 35/8-11NC 35/8-18NF 33/4-10NC 33/4-16NF 34-40NC 36-32NC 38-32NC 310-24NC 310-32NF 312-24NC 31/8-27NPT 3

T-Handle Tap Wrench 0 to 1/4" 3T-Handle Tap Wrench 3/16" to 1/2" 3Economy Die Stock 1" Round Hex 3

When Ordering Specify Round or Hex Dies

DISPLAY CONTENTS

Display, Cabinets & Indexes - Tap & Drill Assortments

137


Black & Gold



CCAABBIINNEETT OONNLLYYPPAARRTT ##3355110000

TAP & DRILL ASSORTMENTSUltra Bor Super Premium• Special Hi - Tungsten and Hi - Molybdenum tool steels, gold surface treated for maximum lubricity.

• Recommended for use in production tapping and drilling of work hardening grades of stainless steel and other hard metal applications.

• Precision ground tap threads for the ultimate in accuracy and performance.

Super Premium Tap & Drill Dispenser Assortment 67 Piece, Spiral Point Taps & Jobber Length Drills67-SP Assortment contains:Super premium jobber drill sizes:

6 each #36, 29, 25, 213 each #7, F & 5/16 2 each #3, I, Q, U, 25/64, 27/64 & 29/64

Super premium spiral point plug tap sizes:3 each 1/4-202 each 6-32, 8-32, 10-24, 10-32 and 1 each 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20

Includes 3 drawer stocking cabinet.

PART # 35121

Super Premium Tap & Drill DispenserAssortment 123 Piece, Spiral Point Taps & Jobber Length Drills123-SP Assortment contains:Super premium jobber drill sizes:

12 each #36, 29, 25, 21 6 each #7, F & 5/16 3 each #3, I, Q, U, 25/64, 27/64 & 29/64

Super premium spiral point plug tap sizes:

6 each 1/4-20 3 each 6-32, 8-32, 10-24, 10-32, 5/16-18 & 3/8-162 each 1/4-28, 5/16-24, 3/8-24, 7/16-14 & 1/2-131 each 7/16-20 & 1/2-20 Includes 3 drawer stocking cabinet

PART # 35120

Super Premium Tap & Drill DispenserAssortment 123 Piece, Straight FluteTaps & Jobber Length Drills123-SF Assortment contains:Super premium jobber drill sizes:

12 each #36, 29, 25, 21 6 each #7, F & 5/16 3 each #3, I, Q, U, 25/64, 27/64 & 29/64

Super premium straight flute plug tap sizes:

6 each 1/4-20 3 each 6-32, 8-32, 10-24, 10-32, 5/16-18 & 3/8-162 each 1/4-28, 5/16-24, 3/8-24, 7/16-14 & 1/2-131 each 7/16-20 & 1/2-20 Includes 3 drawer stocking cabinet

PART # 35110

Display - Display Packages

138

Displays, Cabinets & IndexesBlack & Gold



DISPLAY NO. DC145SP

DISPLAY NO. DC116SP

DISPLAY PACKAGES

Type 250-UBMechanic Length DrillsUltra Bor Super Premium - Black & Gold - 135˚ Split Point• Super premium drills in attractive, displays.

• All drills are packed on cards with logo and scanable barcode.

• 250-UB drills with flatted reduced shanks are used where indicated.

All displays contain an attractive header card and 1/4" peg board fasteners.

PPaarrtt ## 8811665511

Contents Size No. of Cards250-UB 3/16, 1/4 5

1/16 thru 1/2 1/16, 5/64, 3/32, 7/64, 1/8, 5/16 49/64, 5/32, 11/64, 13/64, 7/32 3

15/64, 3/817/64, 9/32, 19/64, 21/64, 11/32 2

23/64, 7/16, 1/225/64, 13/32, 27/64, 29/64 1

15/32, 31/64

Part # 81631

Contents Size No. of Cards250-UB 1/16 thru 13/32 1/8 7

1/16, 3/32 55/32 3

258-UB 7/16 thru 1/2 1/4 73/16, 5/16 6

9/32, 11/32, 3/8 413/32, 7/32, 7/16 3

1/2 215/32 1

Part # 81641

Contents Size No. of Cards250-UB 1/16 thru 3/8 1/8 7

1/16, 3/32 55/32 3

258-UB 7/16 thru 1/2 1/4 73/16, 5/16 6

3/8 47/32, 7/16 3

1/2 2

* 1/16 thru 1/8 = 3 per card, 9/64 thru 1/4 = 2 per card

* 1/16 thru 1/8 = 3 per card, 9/64 thru 1/4 = 2 per card

Type CHC-UBCarbide Tipped Holecutter DisplayUltra Bor Super Premium• Ultra Bor Super Premium Carbide Tipped Holecutters are made with ultra-hard tungsten carbide teeth for cutting through tough alloys.

• The design provides sharp, crisp cuts without burrs and prevents over penetration.

• The built-in pilot drill with ejector spring quickly discharges the slug effortlessly.

Part # 62700

Contents Size No. of EachCCHHCC--UUBB 13/16, 7/8, 15/16, 1'' 1Depth of cut 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-3/83/16''

CCHHDD--UUBB 13/16, 7/8, 15/16, 1'', 1Depth of cut 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-3/81''

Display Rack 16'' width x 27'' height 1(Display Rack Only Part # 14120)

CARBIDE HOLECUTTERS DISPLAYDISPLAY NO. DC72SP

Display Rack Only

Part # 14120

Indexes - Indexes Only

139


Black & Gold



INDEXES ONLY

Type 901

JJoobbbbeerr IInnddeexxeessQty.

Part No. Description per/pack43870 I-11 143760 I-13 149044 I-13M 143770 I-15 143780 I-20 143790 I-21 143880 I-25 143800 I-26 143810 I-29 149049 I-41 143860 I-60 143940 I-115 143850 H-13 1

PPllaassttiicc IInnddeexxeess && CCaasseess

Qty.Part No. Description per/pack44000 13-PL 144020 I-25TDI 144040 I-40TDI 161670 I-58TDI 1

SSccrreeww MMaacchhiinnee IInnddeexxeessQty.

Part No. Description per/pack43890 S-13 143900 S-21 143910 S-29 143920 S-60 1

SSiillvveerr && DDeemmiinngg IInnddeexxeessQty.

Part No. Description per/pack57440 ISD-8SP 143930 I-SD 112240 PL-4SD 157430 A-33 1

Display, Cabinets & Indexes - Black Indexes / ID Plate Slot




BLACK INDEXES - ID PLATE SLOT

Type 901

TTaapp && DDrriillll IInnddeexxeessQty.

Part No. Description per/pack58320 I-10TD 157570 I-18TD 157980 I-18TDM 158000 I-18TDF 158502 I-12TD 1

DDrriillll && EExxttrraaccttoorr IInnddeexxQty.

Part No. Description per/pack

58331 I-BRSQ 1

HHoollee HHoogg™™ IInnddeexxQty.

Part No. Description per/pack38850 I-8HH 1

TTaapp IInnddeexxeessQty.

Part No. Description per/pack61630 I-19T 161640 I-10T 1

SSppoottwweelldd™™ IInnddeexxeessQty.

Part No. Description per/pack35000 I-6WO 116040 I-4WO 1

JJoobbbbeerr IInnddeexxeessQty.

Part No. Description per/pack28580 I-3SP 157460 I-13SP 157470 I-15SP 157480 I-21SP 157490 I-26SP 157500 I-29SP 157510 I-60SP 157520 I-115SP 158930 I-25SP 199860 I-21SPR 1

SSccrreeww MMaacchhiinnee IInnddeexxQty.

Part No. Description per/pack23250 I-29SPT 1

Silver & Deming IndexesQty.

Part No. Description per/pack57440 ISD-8SP 1

Documents

Ds Ply Cb Net Section