Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 1/14
CSIR-Central Leather Research Institute (../Default.aspx)
D r. S . N . J a i s a n k a rSr. Principal Scientist
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 2/14
Academic Quali�cations
Ph. D. (Polymer Technology), Anna University, Chennai, India. M. Tech. (Polymer Technology), Cochin
University of Science and Technology, Cochin, India. M.Sc. (Applied Chemistry), Anna University, Chennai,
India.
Contact Details
Dr.S.N. Jaisankar
Sr. Principal Scientist
Honorary Faculty - Anna University & Professor - AcSIR
Polymer Science & Technology
CSIR-Central Leather Research Institute
Adyar, Chennai – 600 020
e-mail: [email protected] (mailto:[email protected]),
Phone:91 44 24437199
Patents Filed
A Novel process for the development of corrosion resistant thin organic coating for zinc coated
steel sheets. A. Singh, Nitu Rani, N. Bandyopadhyay, T.Venugopal, S.N. Jaisankar and Ganga R. and
T.Ramasami. (430 KOL 2005).
A Novel water soluble sulfonated melamine formaldehyde ionic condensate and a process for the
preparation thereof , S.N. Jaisankar, T.Sivagamasundari, R. Ganesh Jeevan, J. Kanagaraj, Sanjeev
Gupta and Ganga R. (2135 DEL 2008).
A novel insole sheet and a process for the preparation thereof, G. Saraswathy, G. Gopalakrishna, B.
N. Das, R. Rajaraman, Y. Lakshminarayana, S. N. Jaisankar, Ganga R., A. B. Mandal. (775 DEL 2008).
A Novel water dispersible Oiligosaccharide-Graft-Acrylic copolymer and a process for the
preparation thereof, Y. Lakshminarayana, S. N. Jaisankar, P. Saravanan, R. Ramesh, S. Ramalingam,
and A. B. Mandal, (CSIR REF NO: 0192NF2011).
A novel slurry seal mix for road construction and a process for its preparation thereof, C.Rose,
C.Kamaraj, S. N. Jaisankar, U.Mani, T. P. Sastry, S.Gangopadhyay, A. B. Mandal ((212NF2016,
P15PL13, dt. 15/11/2016).
A novel slurry seal mix for road construction and a process for its preparation thereof, C.Rose,
C.Kamaraj, Sellamuthu N. Jaisankar, U.Mani, T. P. Sastry, S.Gangopadhyay, A. B. Mandal (CSIR Ref.
No. 0198NF 2011)
Polymer stabilized liquid crystal device and composition and method thereof, Krishna Prasad,
Marlin Baral, Sellamuthu N. Jaisankar, IN 201741002313 A 20180727.
Water based polymeric nanocomposites for retanning cum �nishing and coating applications, S. N.
Jaisankar, A. Murali, G. Preethi, R. Ramesh, R. Mohan, D. Murugan, V. John Sundar, T. Shakila
Shobana, P. Saravanan, (Ref No.: 161.3.1, dt on 31/07/2017).
International conferences: Attended and presented the papers (country visited)
About Position & Experience Publications & Patents Awards & Honours Team
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 3/14
1. Oral Paper presented at AIChE100/ACS Conference, Spring National Meeting, New Orlands,
USA, April 6-10, 98p, 2008.
2. Visual presentation at 53rd Pentasectional Meeting of the American Chemical Society
(ACS), Duncan, USA, March - 5, 2008.
3. Visual presentation, at XXX CONGRESS OF THE IULTCS, Beijing, China, on the 11-14th of
Oct. 2009.
4. Bilateral Programmes of Academy of Sciences of the Czech Republic (ASCR) and Institute of
Macromolecular Chemistry (IMC), Prague, Czech Republic - Counsil of Scienti�c and
Industrial Research (CSIR) - Central Leather Research Institute (CLRI),Chennai, India, on
Studies on the preparation of soft polymeric gel from the polyurethane ionomers and to
characterize their viscoelastic and rheological properties of the materials. (From 14th
November 2012 to 20th December November 2012).
Books published /Chapters contributed
1. Contributed a chapter entitled “Simultaneous-Interpenetrating Polymer Networks” in the book
“Selected Topics in Polymer Science”, S. N. Jaisankar and Ganga Radhakrishnan, pub. By Prof. S.Maiti
Award Foundation, Kolkata, India, p21-26, March, 2001.
2. Wiley: Encyclopedia of Biocolloid and Biointerface Science, 2 Volumes Set, Hiroyuki Ohshima (Editor),
ISBN: 978-1-118-54276-7, by K. Seeni Meera, R. Murali Sankar, S. N. Jaisankar, and A. B. Mandal,
Title of the chapter on: Studies on Biocompatible Surface Active Silica Aerogel andPolyurethane/Siloxane Cross-linked Structures for Various Surfaces, 2016
3. Adhigan Murali, Dhanasekaran Prakash, Debasis Samanta, Sellamuthu N. Jaisankar*, Book chapter
on “Polymer nanocomposites via functionalized single-walled carbon nanotubes”, for the Encyclopedia
of Nanoscience and Nanotechnology, American Scienti�c Publishers, Edited by Hari Singh Nalwa,
USA, 25-volume set, ISBN: 1-58883-001-2, 2016.
Publications
1. S. N. Jaisankar, Y. Lakshminarayana, Ganga Radhakrishnan and T. Ramasami, Modi�ed castor oil based
polyurethane elastomers for one‑shot process, Polym. Plast. Technol. Eng., 35,781-789, 1996.2. Y. Lakshminarayana, S. N. Jaisankar, Ganga Radhakrishnan and T. Ramasami, Water based graft copolymers
for leather �nishing, Int. Plast. Eng. Technol., 2, 73-85, 1995.
3. Y. Lakshminarayana, S. N. Jaisankar, K. P. Rao and Ganga Radhakrishnan, Synthesis, thermal and mechanical
properties of polyurethanes based on triols, Int. J. Polym. Mater. 13, 133-138, 1996.
4. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Compatibility of poly (vinyl chloride-co-vinyl
acetate)/polyester based polyurethane blends, Polym. Int., 43, 368 -372, 1997.5. S. N. Jaisankar, K. R. Haridas and Ganga Radhakrishnan, Synthesis and characterization of thermotropic liquid
crystalline polyesters, J. Macromol. Sci. Part A Pure Appl. Chem. A34, 713-723, 1997.6. A. Sultan Nasar, S. N. Jaisankar, S. Subramani and Ganga Radhakrishnan, Synthesis and properties of
imidazole blocked toluene diisocyanates, J. Macromol. Sci. Part A Pure Appl. Chem., A34, 1237-1247, 1997.
7. S. N. Jaisankar, S.Rukumani and Ganga Radhakrishnan, Thermotropic liquid crystalline copolyesters based on
4,4'-dihydroxy biphenyl, Macromol.-New Front., Proc. IUPAC Int. Symp. Adv. Polym. Sci. Tech.., 1,263-265, 1998.8. Y. Lakshminarayana, S. N. Jaisankar, N. Radhakrishnan, S. Ramalingam and Ganga Radhakrishnan, Studies on
Casein-Acrylic Graft Copolymers as Glaze Finish for Leathers, Macromol.-New Front., Proc. IUPAC Int. Symp.Adv. Polym. Sci. Technol., 2, 1110-1113, 1998.
9. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Morphological development of TPU/SAN
immiscible blends with compatibilizer, Int. Plast. Eng. Technol., 3, 61-67, 1999.10. S.Balakrishnan, N. R. Neelakantan and S. N. Jaisankar, Effect of functionality levels and compatibility of
polycarbonate blends with maleic anhydride grafted ABS, J. Appl. Polym. Sci., 74, 2102-2110, 1999.
11. S. N. Jaisankar, Y. Lakshminarayana, R. Rajaraman, Ganga Radhakrishnan and T. Ramasami, A Novel Water
Dispersable Bentonite-Acrylic Graft Copolymer As Filler Cum Retanning Agent For Leather Applications,
Proceedings of the XXV IULTCS Congress, p 625-632, 1999.
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 4/14
12. S. N. Jaisankar, Y. Lakshminarayana, Sanjeev Gupta, Ganga Radhakrishnan and T. Ramasami, Polyurethane
Interpenetrating Polymer Networks as Top Coats for leather, Proceedings of the XXV IULTCS Congress, 620-624,
1999.
13. S. N. Jaisankar, A. Anand Prabu, Y. Lakshminarayana and Ganga Radhakrishnan, Preparation and properties of
semi-interpenetrating polymer networks based on polyurethane ionomer/polyvinyl chloride, J. Mater. Sci., 35,1065-1068, 2000.
14. S. N. Jaisankar and Ganga Radhakrishnan, Effect of compatibilizer on morphology and mechanical properties
of TPU/SAN blends, Polym. Eng. Sci., 40, 621-626, 2000.
15. Y. Lakshminarayana, S. N. Jaisankar, P. Ramalingam and Ganga Radhakrishnan, A novel water dispersible
bentonite-acrylic graft copolymers as �ller cum retanning agent for leather applications, J. Am. Leather Chem.Assoc., 97, 14-23, 2002.
16. S. N. Jaisankar,* Y. Lakshminarayanana and Ganga Radhakrishnan, Semi-interpenetrating polymer networks
based on polyurethane ionomer / polyvinyl chloride, Adv. Polym. Tech. 23, 24-31, 2004.
17. S. N. Jaisankar, Y. Lakshminarayanana and Ganga Radhakrishnan, Miscibility and phase behaviour in melt
blends of thermoplastic polyurethane and styrene acrylonitrile copolymers, J. Macromol. Sci. Part B Phys. B43,
755- 762, 2004.
18. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Polyurethane -Poly (ethyl hexyl acrylate-co-
methyl methacrylate) interpenetrating polymer networks,Polym. Plast. Technol. Eng., 44, 633-643, 2005.
19. S. N. Jaisankar,* Interaction Between P(VC-VA) and SAN Copolymer Blends Investigated by Thermal Analysis,
Polym. Plast. Technol. Eng., 46, 913-917, 2007.
20. B. Ramaraj, S. N. Jaisankar, Thermal and Morphological Properties of Poly(vinyl alcohol) and Layered Double
Hydroxide (LDH) Nanocomposites, Polym. Plast. Technol. Eng., 47
(http://www.informaworld.com/smpp/title~content=t713925971~db=all~tab=issueslist~branches=47#v47),
733-738, 2008.
21. Sellamuthu N. Jaisankar, Donna J. Nelson and Christopher Brammer, Preparation and properties of
thermoplastic nanocomposites based on polyurethane ionomers, Proc. of 53rd Pentasectional Meeting of theAmerican Chemical Society, 14, 2008.
22. S. N. Jaisankar, * Y. Lakshminarayana, Sindhya K. Pushpan, and A. B. Mandal, Preparation and properties of
thermoplastic IPN nanocomposites based on polyurethane ionomers, ISAMPE, 471- 477, 2008.
23. Sellamuthu N. Jaisankar*, Donna J. Nelson, and Christopher N. Brammer, New Synthesis and
Characterization of Ionic Polyurethane-urea Liquid Crystals, Polymer, 50, 4775-4780, 2009.24. Y. Lakshminarayana, S. N. Jaisankar, P. Saravanan, N. K. Chandrababu, Suseela Rajkumar, A. B. Mandal, Studies
on Graft Copolymerization of Acrylic Acid onto Collagen Hydrolysate as High Performance Retanning Agent
for Leather, XXX Congress Int. Union of Leather Technol. & Chem. Soc.,2, 188-193, 2009.
25. G. Saraswathy, BN Das, S. N. Jaisankar, Y. Lakshminarayana, Ganga Radhakrishnan, and AB Mandal, Synthesis
and processing of polyurethane as porous viscoelastic sheet for application in therapeutic footwear, XXXCongress Int. Union of Leather Technol. & Chem. Soc., 2, 145-151, 2009.
26. Y. Lakshminarayana, S. N. Jaisankar,* P. Saravanan, N. K. Chandrababu and A. B. Mandal, A High performance
starch-methacrylic acid graft copolymer as tanning aid for leather, Leather Age, XXXII, 74-78, 2010.
27. S. N. Jaisankar,* Sanjeev Gupta, Y. Lakshminarayana, J. Kanakaraj, A. B. Mandal, Water-based anionic
sulfonated melamine formaldehyde condensate oligomer as re-tanning agent for leather processing, J. Am.Leather Chem. Assoc., 105, 289-296, 2010.
28. S. N. Jaisankar,* Y. Lakshminaryana, Christopher Brammer, Donna J. Nelson, Filled Interpenetrating PolymerNetworks, Proce. AIChE, 1, 98-99, 2010.
29. K. Seeni Meera, R. Murali Sankar, S. N. Jaisankar, A. B. Mandal, Mesoporous and biocompatible surface active
silica aerogel synthesis using choline formate ionic liquid, Colloids Surf., B., 86, 292-297, 2011.
30. S. N. Jaisankar,* Sanjeev gupta, Y. Lakshminarayana, J. Kanakaraj, A. B. Mandal, A novel anionic condensate
oligomer as retanning agent for leather processing, Leather Age, XXXIII, 36-39, 2011.
31. Debasis Samanta,R. Murali Sankar,S. N. Jaisankar,Md. Sayem Alam, A. B. Mandal, Acid-responsive
microcapsules: the loading-unloading processes, Chem. Commun., 47, 11975-11977, 2011.
32. M. Sakar, S. Balakumar, S. N. Jaisankar, S. Arumugam, Investigation on the fabrication and characterizations of
A-site modi�ed multiferroic BiFeO3 nanoparticles, IEEE Xplore, 70-73, 2011.
33. K. Seeni Meera, A. B. Mandal, Sol-gel network silica/modi�ed montmorillonite clay hybrid nanocomposites for
hydrophobic surface coatings, Colloids Surf., B., 90, 204-210, 2012.
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 5/14
34. P. Deivanayagam, and S. N. Jaisankar,* Synthesis and Characterization of Composite Membranes Derived
From Mono Sulfonated Poly (Ether Sulfone) and Silicotungstic Acid, J. Macromol. Sci. Part A Pure Appl. Chem.,49, 1092-1098, 2012.
35. Debasis Samanta, P. Murugan, S. J. Ananthakrishnan, N. Somanathan, S. K. Das, S. N. Jaisankar and A. B.
Mandal, “Click” Polymerization on Self-assembled Monolayer: A Convenient Approach to Functionalize
Various Surfaces with Polytriazole, Chem. Commun., 48, 12068-12070, 2012.
36. R.Murali Sankar, K. Seeni Meera, Debasis Samanta, A. Murali, P. Jithendra, A. B. Mandal and S. N. Jaisankar,*
The Reinforced Hydrogel for Drug Loading: Immobilization of Single-walled Carbon Nanotubes in Cross-
linked Polymers via Multiple Interactions, RSC Adv., 2, 12424-12430, 2012.
37. S. N. Jaisankar,* R. Murali Sankar, K. Seeni Meera, and A. B. Mandal, Thermoplastic interpenetrating polymer
networks based on polyvinyl chloride and polyurethane ionomers for damping application, Soft Mater., 11, 55-
60, 2013.
38. P. Deivanayagam, A. R. Ramamoorthy and S. N. Jaisankar,* Synthesis and characterization of sulfonated poly
(arylene ether sulfone) (SPAES) / silicotungstic acid (STA) composite membranes for fuel-cells, Polym. J., 45,
166-172, 2013.
39. Sellamuthu N Jaisankar,* R. Sathya, S. Hariharan, R. Mohan, P. Saravanan, D. Samanta, A. B. Mandal, Cloisite-g-
Methacrylic Acid Copolymer Nanocomposites by Graft from Method for Leather Processing, Ind. Eng. Chem.Res. 11, 55-60, 2013.
40. R. Murali Sankar, K. Seeni Meera, A. B. Mandal, S. N. Jaisankar,* Thermoplastic polyurethane/single-walled
carbon nanotubes composite with low electrical resistance surfaces, High Perform. Polym. 25, 135-145, 2013.
41. Seeni Meera K., Murali Sankar R., S. N. Jaisankar, and A. B. Mandal, Physicochemical Studies on
Polyurethane/Siloxane Crosslinked Films for Hydrophobic Surfaces by Sol-Gel Process, J. Phys. Chem. B. 117,
2682-2694, 2013.
42. M. Sakar, S. Balakumar, A. Tamilselvan, P. Saravanan, S. N. Jaisankar, Annealing temperature mediated physical
properties of bismuth ferrite (BiFeO3) nanostructures synthesized by a novel wet chemical method, Mater.Res. Bull.48, 2878-2885, 2013.
43. D. Samanta, A. Murali, A. Jaya Prakash, P. Nagaraju, R. Ramesh, T. Mitra, A. Gnanamani, S. N. Jaisankar, R.
Mohan, Md. Sayem Alam, A. B. Mandal, Chromium-assisted immobilization of N-isopropylacrylamide-based
methacrylic acid copolymers on collagen and leather surfaces: thermo-responsive behavior, RSC Adv., 3,
16626- 16631, 2013.
44. R.Murali Sankar, K. Seeni Meera, S. Debasis, P. Jithendra, A. B. Mandal and S. N. Jaisankar,* The pH-sensitive
polyampholyte nanogels: inclusion of carbon nanotubes for improved drug loading, Colloids Surf., B.,112, 120-
127, 2013.
45. M. Sakar, (http://adsabs.harvard.edu/cgi-bin/author_form?
author=Sakar,+M&fullauthor=Sakar,%20M.&charset=UTF-8&db_key=PHY)S. Balakumar, P.
(http://adsabs.harvard.edu/cgi-bin/author_form?
author=Balakumar,+S&fullauthor=Balakumar,%20S.&charset=UTF-8&db_key=PHY)Saravanan, S. N.
(http://adsabs.harvard.edu/cgi-bin/author_form?
author=Saravanan,+P&fullauthor=Saravanan,%20P.&charset=UTF-8&db_key=PHY) Jaisankar,
(http://adsabs.harvard.edu/cgi-bin/author_form?
author=Jaisankar,+S&fullauthor=Jaisankar,%20S.%20N.&charset=UTF-8&db_key=PHY) Manifestation of
weak ferromagnetism and photocatalytic activity in bismuth ferrite nanoparticles, AIP Conference Proceedings,
1512, 228-229, 2013.
46. D. Manjula Dhevi (http://www.sciencedirect.com/science/article/pii/S0014305713003583), S.N. Jaisankar
(http://www.sciencedirect.com/science/article/pii/S0014305713003583), Madhvesh Pathak
(http://www.sciencedirect.com/science/article/pii/S0014305713003583), Effect of New Hyperbranched
Polyester of Varying Generations on Toughening of Epoxy Resin through Interpenetrating Polymer Networks
using Urethane Linkages, Eur. Polym. J. (http://www.sciencedirect.com/science/journal/00143057), 49, 3561-
3572, 2013.
47. R. Murali Sankar, K. Seeni Meera, D. Samanta, D. Paradesi, A. B. Mandal, S. N. Jaisankar,* Studies on Inter and
Intra Molecular Hydrogen Bonding and Morphologies of Single-walled Carbon Nanotubes/Polyurethane-
amide, Procedia Eng. 93, 43-48, 2014.
48. B. Mariappan, V. Rajappa, S. N. Jaisankar,* Morphology and Electrical conductivity of compatibilized
thermoplastic polyurethane/single-walled carbon nanotubes, Procedia Eng. 93, 59-65, 2014.
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 6/14
49. Sellamuthu N. Jaisankar,* Donna J. Nelson, Ravi Kumar, and Asit Baran Mandal Ionomer Covalent
Functionalization of Single-Walled Carbon Nanotubes by Radical Polymerization of Zirconium Acrylate,
AIChE Journal, 60, 820-828, 2014.
50. Sakar Mohan, Balakumar Subramanian, Indranil Bhaumik, Pradeep Kumar Gupta, and Sellamuthu N.
Jaisankar, Nanostructured Bi(1-x)Gd(x)FeO3 – A Multiferroic Photocatalyst on its Sunlight Driven
Photocatalytic Activity, RSC Adv., 4, 16871-16878, 2014.
51. Kamal Mohamed Seeni Meera,Rajavelu Murali Sankar,Jaya Paul,Sellamuthu N. Jaisankar,and Asit Baran
Mandal, In�uence of Applied Silica Nanoparticles on Bio-renewable Castor Oil Based Polyurethane
Nanocomposite and its Physicochemical Properties, Phys. Chem. Chem. Phys., 16, 9276-9288, 2014.
52. Paradesi Deivanayagam, Debasis Samanta, Asit Baran Mandal and Sellamuthu N. Jaisankar,* Novel Fuel
Cell Membrane with High Ef�ciency, RSC Adv. 4, 26193 – 26200, 2014.
53. Sellamuthu N. Jaisankar,* Neelamegan Haridharan, Adhigan Murali, Ponyrko Sergii, Milena Špírková, Asit
Baran Mandal, Libor Matějka, Single-Electron Transfer Living Radical Copolymerization of SWCNT-g-PMMA
via Graft from approach, Polymer, 55, 2959-2966, 2014.
54. P. Suresh Babu, P. K. Gayathri, S. N. Jaisankar,* Ionic polyurethane materials for enhanced platelets adhesion
and biocompatibility, IOSR-J. Pharm. Biol. Sci., 9, 69-76, 2014.
55. Adhigan Murali, Senthil A. Gurusamy-Thangavelu, Sellamuthu N. Jaisankar* and Asit Baran Mandal,
Augmentation of properties on sparingly loaded nanocomposites via functionalized single-walled carbon
nanotubes using a covalent approach, RSC Adv., 4, 62947-62950, 2014.
56. M.Bharathi, M. S. Kiran and S. N. Jaisankar, Fabrication and biocompatible properties of nanocomposites
made from thermoplastic polyurethane and hydroxyapatite, Int. J. Appl. Eng. Res. 9, 30715-26, 2014.
57. Nagaraju Pentela P. Murugan, Sellamuthu N. Jaisankar, Debasis Samanta, and Asit Baran Mandal,
Immobilization of Ruthenium Benzylidene on Thermoresponsive Polymer: Methodology and Application, J.Organomet. Chem., 778, 42-46, 2015.
58. Gosala Radha, Debasis Samanta, Subramanian Balakumar, Asit Baran Mandal and Sellamuthu N. Jaisankar,*
Single-walled Carbon nanotubes decorated with polypyrrole-TiO2 nanocomposites, J. Nanosci. Nanotechnol.15, 3879-3886, 2015.
59. P. Murugan, Munusamy Krishnamurthy, Sellamuthu N. Jaisankar, Debasis Samanta, Asit Baran Mandal,
Controlled Decoration of Surface with Macromolecules: Polymerization on Self-assembled Monolayer (SAM),
Chem. Soc. Rev., 44, 3212-3243, 2015.60. Sakar M., Bharathkumar S., Jayamani M., Balakumar S. Sellamuthu N. Jaisankar, Silver plasmons sensitized
photocatalytic activity of bismuth ferrite (BiFeO3) nanoparticles, J. Indian Chem. Soc., 92, 732-735, 2015.
61. A. Jayakumar, N. Malarvizhi, B. Rajeswari, A. Murali, Debasis Samanta, P. Saravanan, C. Muralidharan,
Sellamuthu N. Jaisankar,* Synthesis and Characterization of Semi-Interpenetrating Polymer Network Based
on Single-Walled Carbon Nanotubes, Adv. Mater. Lett. 6, 790-794, 2015.
62. N. Malarvizhi, B. Rajeswari, Dhanasekaran Prakash and Sellamuthu N Jaisankar,* Morphology and thermal
properties of thermosetting polyurethane/single-walled carbon nanotube composites, Graphene, 3, 65-71,
2015.
63. Adhigan Murali, Senthil A. Gurusamy-Thangavelu, Sellamuthu N. Jaisankar,* and Asit Baran Mandal,
Enhancement of physicochemical properties of polyurethane-perovskite nanocomposite via addition of nickel
titanate nanoparticles, RSC Adv., 5, 102488-102494, 2015.
64. Bharathi Mariappan and Sellamuthu N. Jaisankar, In�uence of styrene maleic anhydride compatibilizer on
the properties of polyurethane carbon nanocomposites, Adv. Compos. Lett. 24, 137-142, 2015.
65. Seena Joseph, Tushar S. Ambone, Abhijit V. Salvekar, S. N. Jaisankar, P. Saravanan E. Deenadayalan,
Processing and characterization of waste leather based polycaprolactone biocomposites, Polym. Composite(DOI: 10.1002/pc.23891) (In Press 2015).
66. Adhigan Murali, Neelamegan Haridharan, Pombala Suresh Babu, Sivalingam Jayaveni, Sellamuthu N.
Jaisankar*, Synthesis of Fluorophore Decorated Single-Walled Carbon Nanotubes for in-vitro
Cytocompatibility, J. Nanosci. Nanotechnol. (Accepted 2016).
67. M. Sakar, S. Balakumar, P. Saravanan, Sellamuthu N. Jaisankar, Electric �eld induced formation of one-
dimensional bismuth ferrite (BiFeO3) nanostructures in electrospinning process, Mater. Design. 94, 487-495,
2016.
68. Bharathi Mariappan and Sellamuthu N Jaisankar, Properties of polyurethane nanocomposite �laments for
conductive textile applications, J. Thermoplast. Compos. Mater., 2016, DOI: 10.1177/0892705716632861.
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 7/14
69. Bharathi Mariappan and Sellamuthu N Jaisankar, Properties of polyurethane nanocomposite �laments for
conductive textile applications, J. Thermoplast. Compos. Mater., 2016, DOI: 10.1177/0892705716632861.
70. M. Krishnamurthy, K. Krishnamoorthy, A. Arulkashmir, V. Raghavendra A. Murali, Sellamuthu N. Jaisankar, P.
Murugan, Senthil A. G-T, A. Sultan Nasar, A. B. Mandal, Debasis Samanta, “Click” Polymerization: A
Convenient Strategy to Prepare Designer Fullerene Materials, Mater. Design. 108, 34 - 41, 2016
71. B. Rajeswari,N. Malarvizhi, E. Deenadayalan and Sellamuthu N Jaisankar In�uences of functionalized
nanoclays on morphology and mechanical properties of polyvinyl alcohol based composites by twin-screw
extruder, Polym. Plast. Technol. Eng.56, 883-888, 2017
72. Dhanasekaran Prakash and Sellamuthu N. Jaisankar* Synthesis and Characterization of Triphenylpyridine
containing Azo-linked Polymer Materials, Adv. Mater. Lett. 2, 161-164, 2016
73. B. Rajeswari,N. Malarvizhi, E. Deenadayalan and Sellamuthu N Jaisankar In�uences of functionalized
nanoclays on morphology and mechanical properties of polyvinyl alcohol based composites by twin-screw
extruder, Polym. Plast. Technol. Eng.56, 883-888, 2017.74. Dhanasekaran Prakash, Adhigan Murali, and Sellamuthu N. Jaisankar*, Synthesis and characterization of
nitrogen-rich azo linked conjugated polymer materials, International, Int J Polym Anal Ch. (Accepted 2017,
DOI: 10.1080/1023666X.2017.1324389).
75. Munusamy Krishnamurthy, P. Murugan, A. Murali, S. N. Jaisankar, A. B. Mandal, Debasis Samanta “Click”
Polymer of Carbon Nanotubes for Superhydrophobic Glass and Leather, Green Materials, (Accepted 2017).76. Krishna Prasad, Subbarao; Baral, Marlin; Murali, Adhigan; Jaisankar, Sellamuthu, Carbon nanotube reinforced
polymer stabilized liquid crystal device: Lowered and thermally invariant threshold with accelerated
dynamics, ACS Applied Materials & Interfaces 9(31), 26622-26629, 2017.77. Sholingur C. Ramkumar, Adhigan Murali, Govindarajan Preethi, Bangaru Chandrasekaran, Palanivel
Saravanan, Sellamuthu N. Jaisankar*, Polycarbodiimide and polyurethane cross-linkers for leather �nishing, Leatherand Footwear Journal, 17(4), 181-192, 2017.
78. Adhigan Murali, Neelamegan Haridharan, Pombala Suresh Babu, Sivalingam Jayaveni, Sellamuthu N.Jaisankar*, Synthesis of Fluorophore Decorated Single-Walled Carbon Nanotubes for in-vitro cytocompatibility, J.Nanosci. Nanotechnol. 18, 959-966, 2018.
79. Senthil A. Gurusamy Thangavelu, A. Murali, M. Sharanya, Sellamuthu N. Jaisankar, Asit B. Mandal, Studies on
biodegradable polyurethane-SWCNTs nanocomposite �lms by covalent approach: Physicochemical, electric
and mechanical properties, Appl. Surf. Sci., 449, 745-754, 2018.80. D. Samanta, P. Nagaraju, N. Duraipandy, N. S. Reddy, T. Paranthaman, M. S. Kiran, S. K. Das and S. N. Jaisankar,
Microcapsule from Diverse Polyfunctional Materials: Synergic Interactions for Sharp Response by pH Change, New J.Chem., 42, 8366-8373, 2018.
81. I. P. Bincy, T.Srinivasan, S. N. Jaisankar, V. Ramkumar, Structure, growth and characterization of a new naphthalenefamily crystal for �uorescence and third order nonlinear optical application, , Solid State Sci. 89, 85-92, 2019.
82. Anoop V., S. Subramani, S. N. Jaisankar, C. Sohini, Mary N.L., Mechanical, dielectric and thermal properties ofpolydimethylsiloxane/ polysilsesquioxane nanocomposite for sealant application, J. Appl. Polym. Sci. (Accepted 2018,doi.org/10.1002/app.47228).
83. Dhanasekaran Prakash and Sellamuthu N. Jaisankar , Thermoplastic poly(urethane-thiourethane) triblockcopolymers with SWCNTs composite, Diam. Relat. Mater. 93, 34-41, 2019.
84. K. V. Karthikeyan, S. Anandhi, V. Ramkumar, T. S. Shyju, S. N. Jaisankar and R Suriakarthick, Studies on
nonlinear optical properties of a mixture of 4-nitroaniline-picric acid (2/1), Mater. Res. Express 6,
0751052019.
85. B.Rajeswari, N. Malarvizhi, Dhanasekaran Prakash and Sellamuthu N. Jaisankar*, Viscoelastic, thermal and
morphological properties of nanocomposites based on modi�ed PVA using a twin-screw melt extrusion
process J. Thermoplast. Compos. Mater.,2019, (doi.org/10.1177/0892705719832650).
86. Anoop V, Subramani Sankaraiah, S. N. Jaisankar, Sohini Chakraborty & Mary N.L, Enhanced mechanical,
thermal and adhesion properties of polysilsesquioxane spheres reinforced epoxy nanocomposite adhesive, J.
Adhes., 2019, DOI: 10.1080/00218464.2019.1620107.
International conferences
1. Rukmani Srinivasan, S. N. Jaisankar, Ganga Radhakrishnan, Spacer effect in main chain
thermotropic liquid crystalline polyesters, Int. Conf. on Polym.Characterization,USA, Jan.
*
*
*
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 8/14
1998.
2. S. N. Jaisankar, Y. Lakshminarayana, R. Rajaraman, Ganga Radhakrishnan and T. Ramasami,
Development of Tannery Waste Filled PVC/TPU Blends for Low Temperature Application of
Shoe Sole, Am. Lea.Chem.Assoc. 95th Annual Meeting, Traverse City, Michigan, 13-17, June,
1999.
3. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Polyurethane- Acrylic
simultaneous Interpenetrating Polymer Networks, Proc. of the Int. Conf. on Polymer in the
third Millennium, 2-6 September, France 2001.
4. S. N. Jaisankar, Y. Lakshminarayana and Ganga R., Effect of functionalized liquid crystal
polyurethanes on TPU/SAN melt blends, Int. Proc. Adv. Materials and Polymers for Defense
and Aerospace Applications, ICMAT, Singapore, 3-8, July, 2005.
5. S. N. Jaisankar, and Ganga R., Preparation, morphology and mechanical properties of
modi�ed polyurethane / polyurethane ionomer IPN Nanocomposite with modi�ed Bentonite,
Int. Proc. Polym. Nanostructured Materials, ICMAT, Singapore, 3-8 July 2005.
6. Sellamuthu N. Jaisankar, Donna J. Nelson and Christopher Brammer, Preparation and
properties of thermoplastic nanocomposites based on polyurethane ionomers, Proc. of 53rd
Pentasectional Meeting of the American Chemical Society, Duncan, USA, March - 5, 2008.
7. Sellamuthu N. Jaisankar, Donna J. Nelson Christopher N. Brammer, Heather Rhoads,
Natchimuthu G. Natchimuthu, and Asit B. Mandal, Investigation on the Non-covalent
Interaction of Single Walled Carbon Nanotubes with Polyurethane Ionomers, ICMAT &
IUMRS-ICA, 2009, Singapore.
8. S. N. Jaisankar, S. Balakrishnan and Asit B. Mandal, Non-covalent Interaction of Single Walled
Carbon Nanotubes with Ethylene-vinyl Acetate Copolymer Conductive Composite Films for
Sensor Application. ICMAT & IUMRS-ICA, P-18, 2009, Singapore.
9. One of the co-authors (S. N. Jaisankar) for the ICMAT-2011, Singapore:
1. ICMAT11-A-4640 - Compatibilizing effect of liquid crystal ionomers on polyurethane
and poly(styrene-acrylonitrile)melt blends
2. ICMAT11-A-4676-Castor Oil Based Polyurethane Nanocomposite for Coating
Applications
3. ICMAT11-A-4561- Low Temperature Synthesis of SinglePhase Bismuth ferrite
(BiFeO3) Nanocrystals by Soft Chemical Method
4. ICMAT11-A-4727-Polyurethane Grafted Single-walled Carbon Nanotubes and Their
Intermolecular Interaction to Ultimate Properties.
10. K. Seeni Meera, R. Murali Sankar, S. N. Jaisankar, A. B. Mandal, “Synthesis of nanoporous
surface active silica aerogel using biocompatible ionic liquid”, at the 5th Australasian
Symposium on Ionic Liquids held on 3rd - 4th May 2012, at CSIRO, Clayton, Melbourne,
Australia.
11. M. Sakar, S. Balakumar., Indrani Bhaumik, P. K. Gupta, S. N. Jaisankar, Observation of
substituent concentration dependent multiferroicity in bismuth ferrite (BiFeO3)
nanostructures, ICMAT 2013, Singapore, 30th June – 5th July, 2013.
12. M. Bharathi, S. N. Jaisankar, * R. Vijayarangan, Morphology and Electrical Conductivity of
Compatibilized Thermoplastic Polyurethane/single-walled Carbon Nanotube Composites,
ICMAT 2013, Singapore, 30th June – 5th July, 2013.
13. R. Murali sankar, K. Seeni Meera, D. Samanta, P. Divanayagam, A. B. Mandal, S. N. Jaisankar,*
Studies on Inter and Intra Molecular Hydrogen Bonding and Morphologies of Single-walled
Carbon Nanotubes/ Polyurethane-amide, ICMAT 2013, Singapore, 30th June – 5th July,
2013.
14. Adhigan Murali, Senthil A. Gurusamy-Thangavelu, Sellamuthu N. Jaisankar,* Effect of
hydroxyl functionalized single-walled carbon nanotube on their thermal, electrical and
mechanical properties of polyurethane composite, International Conference on Direct Digital
Manufacturing and Polymers, CDDMAP 2015, 28th - 31st October 2015, Karnataka
University, Dharwad, India.
15. Adhigan Murali, Sellamuthu N. Jaisankar,* Synthesis of graphene-graft-methyl methacrylate
copolymer via graft from approach, in the 4th Nano Today Conference, to be held on 6th-10th
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 9/14
December 2015, at JW Marriott Marquis Hotel Dubai, UAE.
16. Dhanasekaran Prakash, Sellamuthu N. Jaisankar,* Synthesis and Characterization of
triphenylpyridine containing azo-linked polymer materials, in the International conference onmaterials science and technology 2016, to be held on 1st-4th March 2016, at University of
Delhi, Delhi.
17. Sellamuthu N. Jaisankar,* Sanjeev Gupta, Vijayalakshmi Narasimhan, Cellappa Muralidharan,
Synthesis Of Water Based Polyurethane / Acrylic Hybrid Latexes For Coating Applications, in
the International conference on materials science and technology 2016, to be held on 1st-4th
March 2016, at University of Delhi, Delhi.
18. Prakash, D. and S. N. Jaisankar “Synthesis and Properties of Azo-linked Polymeric Materials”
poster presented in Fourth International Conference on Frontiers in Nanoscience and
Technology, Cochin Nano – 2016 held on 20-23 February 2016 at CUSAT, Cochin, India.
19. Prakash, D and Jaisankar, SN, ‘An ef�cient synthesis and characterization of nitrogen rich
azo-linked conjugated polymer materials for energy applictions’, International conference on
advanced materials science and technology (ICAMST - 2017), Department of physics, Bannari
Amman Institute of technology, Sathyamangalam, Erode, India, 17-19 August 2017.
National conferences
1. S. N. Jaisankar, and Ganga Radhakrishnan, Studies on compatibility of SAN/TPU immiscible
blends, National Proc. of Recent Advances in Synthesis & Manufacturing Processes of
Plastics, Rubber and Fibres, 13-14 March, 26p, 1997.
2. V. Sriram, S. N. Jaisankar and Ganga Radhakrishnan, A study of the structure-mesomorphism
relationship in unsaturated polyesters and low molecular weight model compounds, National
Sym. on Adv. in Polym. Tech., 27-28 March, 1998.
3. S. N. Jaisankar, and Ganga Radhakrishnan, Semi-Interpenetrating Polymer Networks based
on MDI, Proceedings on Polymer Research in Academy, Industry and R&D Organisation, 26-
27 June, 1998.
4. Rukmani Srinivasan, S. N. Jaisankar and Ganga Radhakrishnan, Thermotropic main chain
liquid-crystalline copolyesters containing biphenylene mesogen and the effect of methylene
spacers, National Seminar on Adv. in Plastics and Rubbers-Materials and Processing, 7-8
January, 2000.
5. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Processing and Properties of
thermotropic liquid crystalline polymers and thermoplastic blends, Proc. of Recent Adv. in
Polym. and Composites, 649p, 2000.
6. S. N. Jaisankar, K. Victor Babu, Y. Lakshminarayana and Ganga Radhakrishnan, 13C CPMAS-
NMR study of thermoplastic polyurethane and styrene acrylonitrile copolymer blends,
Symposium on spatially resolved magnetic resonance and 7th NMR symposium, Feb. 4-7th,
2000.
7. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Processing and properties of
thermotropic liquid crystalline polymers and thermoplastic blends, Recent Advances in
Polymers and Composites, Allied Publisher, p649-65, 2000
8. Y. Lakshminarayana, S. N. Jaisankar, M. Prasanna, S. Ramalingam and Ganga Radhakrishnan,
A high performance water dispersible methacrylic acid graft copolymers onto Guar Gum as
post tanning agent for leather application, National Proc. of Adv. Polym. Materials and
Environmental Protection for the new Millennium, 26 July 2001, p8, 2001.
9. Y. Lakshminarayana, S. N. Jaisankar, Jesuretta Sathian, S. Ramalingam and Ganga
Radhakrishnan, Studies on grafting of acrylonitrile onto Kaolin and its application as �ller for
leather, Innovation in Leather Science and Technology, 24th April, p43, 2001.
10. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Rheological and
Morphological properties of TPU/SAN blends with compatibiliser, Int. seminar on Frontiers of
Polym. Sci. and Eng., Dec. 9-11, IIT, Kharagpur, 2002.
11. Y. Lakshminarayana, S. N. Jaisankar, S. Ramalingam and R. Suresh and Ganga Radhakrishnan,
Synthesis and characterization and application of a novel polysaccharide-acrylic graft
rd
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 10/14
copolymer as tanning and chrome exhaust aid for chrome tanned leather, Int. Seminar on
Frontiers of Polym. Sci. and Eng., Dec. 9-11, IIT, Kharagpur, 2002.
12. Y. Lakshminarayana, S. N. Jaisankar, A.R. Anand, R. Ramesh, S. Ramalingam and Ganga
Radhakrishnan, Novel post-tanning agent based on carboxymethyl cellulose and acrylics:
Product development, performance and evaluation, 36th Leather Research Industry Get
Together, 27-30th Jan. 2002.
13. S. N. Jaisankar, R. Karthika, Y. Lakshminarayana and Ganga Radhakrishnan, Interaction
between P(VC-VA)/SAN copolymers investigated by thermal analysis, Int. Seminar on Adv. in
Polym. Tech. , Dec. 13-14, CUSAT, Kochi, India,2002.
14. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Studies on phase separation in
polymer melt blends investigated by thermal analysis, 5th National Symp. in Chemistry, Feb.
7-9, Chennai, India, 2003.
15. S. N. Jaisankar, Y. Lakshminarayana and Ganga Radhakrishnan, Thermomechanical,
Morphological and Rheological studies on compatibilized TPU/SAN blends, Int. Seminar on
Adv. in Polym. Tech., Jan 16 – 17, CUSAT, Kochi, India, 2004.
16. S. N. Jaisankar, T. Karthikeyan, Y. Lakshminarayana and Ganga Radhakrishnan, Preparation,
morphology and mechanical properties of modi�ed Polyurethane / Polyurethane ionomer-
IPN nanocomposites with MMT, Proc. Int. Conf. Polym. Adv. Tech.., Vol. I, 174, 2004.
17. Y. Lakshminarayana, S. N. Jaisankar, S. Ramalingam, R. Ramesh and Ganga Radhakrishnan, A
High performance water dispersable molasses – graft acrylic copolymers for use as a tanning
aid for leather, Int. Seminar on Adv. in Polym. Tech., Jan 16 – 17, CUSAT, Kochi, India ,2004.
18. K. Subramanian, Y. Lakshminarayana, S. N. Jaisankar, S. Ramalingam, R. Ramesh and Ganga
Radhakrishnan, Synthesis and characterization of methacrylic acid graft copolymers onto
starch by free radical polymerization, Proc. Int. Conf. Polym. Adv. Tech., Vol. I, 299, 2004.
19. P. Anantha Krishnan, Y. Lakshminarayana S. N. Jaisankar, S. Ramalingam, R. Ramesh and
Ganga Radhakrishnan, Preparation and characterization of montmorillonite - acrylic acid
graft copolymer as retanning agent for leather, Proc. Int. Conf. Polym. Adv. Tech., Vol. I, 175,
2004.
20. S. N. Jaisankar and Ganga R., Preparation and properties of Polyurethane ionomer-IPN
nanocomposites, National Sym. of Adv. Characterization Techniques on nanomaterials, IIT,
Roorkee,26-27th Aug. 2005.
21. S. N. Jaisankar, Compatibilization of TPU/SAN blends with functionalized liquid crystalline
polyurethanes, Proc. of National conf. on Polym. for Adv. Tech., Dec. 17- 20, 2006.
22. Md.Mohideen Nawaz Khan, S. N. Jaisankar and Ganga Radhakrishnan, Thermotropic main-
chain liquid crystalline polyurethane ionomers, National Conf. on Frontiers in Polymers,
Organized by the SSP Chennai Chapter, 3rd March 2006.
23. S.N. Jaisankar, Synthesis and characterization of ionic liquid crystals, Preparation of
functionalized low molecular weight thermotropic liquid crystalline polyurethane ionomers,
National Conf. on Polym., Coimbatore, July 14 -15, 2006.
24. S.N. Jaisankar, Polymer Nanocomposites, National Seminar on Recent Trends in
Nanochemistry, Sacred Heart College, Tirupattur, August 25 - 26, 2006.
25. S. N. Jaisankar, Synthesis and characterization of ionic liquid crystal polyurethanes, Int. Conf.
on liquid crystals, University of Mumbai, Mumbai, December. 5-8, 2006.
26. Sindhya Pushpan K, C. Barani Dharan, and S. N. Jaisankar, Preparation and Properties of
thermoplastic nanocomposites based on polyurethane ionomers Int. Conf. on Nanomaterial
and its Applications, NIT, Trichy, Feb 4-6, 2007.
27. Sindhya K. Pushpan, K. Ravichandran and S. N. Jaisankar, Preparation and Properties of
thermoplastic polyurethane/polyurethane ionomer nanocomposites. Int. Conf. on Materials
for the Millennium, Dept. of Applied Chemistry, Cochin University of Science & Tech., Cochin,
March 1-3, 2007.
28. G. Kalpana, M. Eswari, N.L. Mary and S. N. Jaisankar, Structure, Properties and Relationship
of Triazole and Indole Blocked Isocyanate, Int. Conf. on Materials for the Millenium, Dept of
Applied Chemistry, Cochin University of Science & Technology, Cochin, March 1-3, 2007.
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 11/14
29. S. N. Jaisankar and A. B. Mandal, Synthesis and characterization of poly(urethane-urea)
ionomeric liquid crystals, National conf. on Liquid crystals, by Indian Institute of Science, Oct.
13-15, 33p. 2008.
30. Kandaswamy Ravichandran, Sellamuthu N. Jaisankar, Kalayanaraman Krishnamoorthy,
Venkateswaran Sekar, Effect of nanoclay functionalization on the thermal and mechanical
properties of polypropylene / Poly[ethylene- co- (vinyl acetate)] composites, Proce. of the
25th Annual meeting of The Polymer Processing Society, March 1-5, 2009, Goa, India.
31. Y.Lakshminarayana, S. N. Jaisankar, A. B. Mandal, Development of novel anti corrosive thin
organic coating based on styrene-acrylic copolymer emulsion and blends with other additives
for application on galvanized coated steel sheets. World Corcon 09”, Sept 29-Oct 01, p1-8,
2009, Mumbai, India.
32. S N. Jaisankar and A.B.Mandal Effect of nanoclay functionalization on the thermal and
mechanical properties of polypropylene/poly [ethylene-co-vinyl acetate] composites, Proce.
Int. Conf. on Adv. in Polym. Mater., Feb. 20-22, 2010.
33. K.Seeni Meera, R. Murali Sankar, S.N. Jaisankar, Y.Lakshminarayana, A.B.Mandal, A sol gel
derived silica gels: Using biocompatible ionic liquid, Proce. of the Int. Conf. on Adv. in Polym.
Tech., Feb. 26-27, 2010, India, Page No. 322.
34. G. Saraswathy, Y Lakshminarayana, S. N. Jaisankar, Ganga Radhakrishnan1, Gautham
Gopalakrishna, BN Das and AB Mandal, Surface Modi�ed and Medicated Polyurethane for
Application in Athletic Footwear, 44th LERIG 2010-BIOTAN - 29th & 30th Jan, 2010.
35. S. Gangopadhyay, A. B. Mandal, C. Rose, P. Devadose Manoharan, Indhymathi Nambi, S. N.
Jaisankar, U. Mani, C. Kamaraj, Utilization of Chrome Shavings as an Alternate Filler in Micro
Surface Coating for Pavement Preservation: An approach for Leather Industry Solid Waste
Management, 44th LERIG 2010-BIOTAN - 29th & 30th Jan, 2010.
36. S. N. Jaisankar, Sanjeev gupta, Y. Lakshminarayana, J. Kanakaraj, A. B. Mandal, A novel
anionic condensate oligomer as retanning agent for leather processing, Proce. of the VIII Asia
Int. Conf. on Lea. Sci. and Technol. 2010, India.
37. V. Godwin Jenifa, Y. Lakshminarayana, S. N. Jaisankar, C. Rose, P. Saravanan,
N.K.Chandrababu, A. B. Mandal, Enzymatic hydrolysis of tannery biowastes and graft
copolymerization of methacrylic acid onto collagen hydrolysate as tanning aid for leather
applications Proce. of the VIII Asia Int. Conf. on Lea. Sci. and Technol. 2010, India.
38. Y.Lakshminarayana, S. N. Jaisankar, P.Saravanan, S.Ramalingam, R. Ramesh, A.B.Mandal.
Studies on casein-acrylic graft copolymers as glaze �nish for leathers. Proce. of the VIII Asia
Int. Conf. on Lea. Sci. and Technol. 2010, India.
39. Y.Lakshminarayana, S. N. Jaisankar, P.Saravanan, S.Ramalingam, R. Ramesh , A.B.Mandal.
Leather re-tanning agents based on acrylics onto montmorillonite. Proce. of the VIII Asia Int.
Conf. on Lea. Sci. and Technol. 2010, India.
40. G.Saraswathy, Y.Lakshminarayana, S. N. Jaisankar, Gopalakrishna,B.N.Das, Ganga R., A.B.
Mandal, Development and characterization of medicated polyurethane sheet as comfort
insole in athletic footwear, Proce. of the VIII Asia Int. Conf. on Lea. Sci. and Technol. 2010,
India.
41. Y.Lakshminarayana S.N.Jaisankar, N.Somanathan, T.Narasimhaswamy, C.Muralidharan,
Ganga R., A.B.Mandal. Polymer leather composites based on buf�ng dust: characterization
and evaluation. Proce. of the VIII Asia Int. Conf. on Lea. Sci. and Technol. 2010, India.
42. R. Vijayarangan, M. Bharathi, and S. Balakumar, S.N. Jaisankar,Melt blends of thermoplastic
polyurethane/single-walled carbon Nanotubes using twin screw extruder, National
Conference on Nanoscience and Nanotechnology University of Madras, India., (2011).
43. K. Seeni Meera, R. Murali Sankar, S. N. Jaisankar, A. B. Mandal, “Ionic Liquid Con�ned Silica
Gel: Synthesis and Characterization”, Seminar on Recent Trends in Polymeric Materials
(RTPM-2011), 12th Oct. 2011, CSIR-CLRI, Adyar, Chennai.
44. D. Samanta, R. Murali Sankar, K. Seeni Meera, S. N. Jaisankar, A. B. Mandal, “A novel single-
walled carbon nanotube based nanocapusles: “Zip-unzip” mechanismsfor release studies”, at
the Chemical Research Society of India (CRSI) South Zonal Meeting held on 16-17th Dec.
2011, at Pondicherry University, Pondicherry.
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 12/14
45. S. N. Jaisankar, “Nematic liquid crystal phase in ionic polyurethane-ureas” Int. Conf. on
Advancements in polymeric materials (APM-2012), 10-12 Feb. 2012, at CIPET, Ahmedabad,
India.
46. P. Murugan, S. J. Ananthakrishnan, N. Somanathan, S. K. Das, S. N. Jaisanka, A. B. Mandal,
Debases rSamanta,”Click polymerization on surface: the graft through approach”, A National
Seminar on recent trends in chemistry, Chennai Chemistry Conference (CCC-2013), 8-10
Feb. 2013, at CSIR-CLRI, Chennai, India.
47. D. Samanta, R. M. Sankar, S. N. Jaisankar, Md. S. Alam, A. B. Mandal, “Towards designer drug
for targeted delivery: generation of acid responsive microcapsules” A national seminar on
recent trends in chemistry, Chennai chemistry conference (CCC-2013), 8-10 Feb. 2013, at
CSIR-CLRI, Chennai, India
48. R. Murali Sankar, K. Seeni Meera, D. Samanta, A. B. Mandal, S. N. Jaisankar, “Biocompatible
amphiphilic nanogel based on single-walled carbon nanotubes for drug delivery application”
at the Nano India 2013 held on 19-20th Feb. 2013, at NIIST, Trivandrum, Kerala.
49. K. Seeni Meera, R. Murali Sankar, A. Murali, S. N. Jaisankar, A. B. Mandal, “Castor oil
Polyurethane/Siloxane Cross-Linked Structures: In�uence of Siloxane Cross-Linking on its
Properties” at the 3rd FAPS and MACRO-2013 held on 15-18th May 2013, at IISc Bangalore.
50. Paradesi Deivanayagam, and Sellamuthu N. Jaisankar, “Proton conducting composite
membranes for fuel cells”, National level technical symposium, NSRAC-2013, Department of
Chemistry, Pondicherry University, Pondicherry, March 2013.
51. N. Haridharan, A. Murali, A. B. Mandal, S.N. Jaisankar, A Facile method for Fluorophore
Assisted Dispersion of Single-Walled Carbon Nanotubes (SWCNTs):Synthesis,
Characterization and its Cell Transfection Studies, International Conference on
Nanomaterials: Science, Technology and Applications (ICNM’13), by B. S. Abdur Rahman
University, 5-7 Dec 2013.
52. A. Murali, N. Haridharan, A. B. Mandal S. N. Jaisankar, Functionalization of Single-Walled
Carbon Nanotubes with Analgesic Agent Based Polymer for Effective Dispersion and
Antiviral Studies. International Union of Materials Research Societies – International
Conference in Asia – 2013 (IUMRS-ICA-2013), Indian Institute of Science, Bangalore, India.
16-20 Dec 2013.
53. N. Malarvizhi B. Rajeswari, G. T. Senthil Andavan, S. N. Jaisankar, Light-weight �exible carbon
nanotube based polyvinyl acetate composites with improved conductivity, International
Union of Materials Research Society, Materials Research Society of India -International
Conference in Asia - 2013 (IUMRS-ICA 2013), Indian Institute of Science, Bangalore, India.
16-20 Dec 2013.
54. P. Nagaraju, R. Murali Sankar, S. N. Jaisankar, Debasis Samanta, A. B. Mandal, Cross Linked ph
Responsive Microcapsules in Water Medium for Targeted Drug Delivery Application. 16th
National Conference on Surfactants, Emulsions and Biocolloids, CSIR- Central Leather
Research Institute, Chennai. 28-30 November, 2013.
55. Debasis Samanta, Pentela Nagaraju, A. Murali, P. Murugan, S. N. Jaisankar, Asit Baran Mandal,
Thermoresponsive Compounds: Application in Designing Recyclable Catalyst and Smart
Leather. 16th National Conference on Surfactants, Emulsions and Biocolloids, CSIR- Central
Leather Research Institute, Chennai. 28-30 November, 2013.
56. M. Sakar, K. Selva Shamili, S. Balakumar and S. N. Jaisankar, Fabrication of Bi1-XDyxFeO3
thin �lms by spin and dip coating techniques: A comparative study on the structural,
morphological and optical properties, Nanomeet-13, 19-20th September 2013, Anna
University, Chennai 25. (Best poster award).
57. M. Hakkeem, M. Sakar, S. Balakumar and S. N. Jaisankar, Effect of applied voltage in the
formation of multiferroic bismuth ferrite nano�bers by electrospinning method,
Nanomeet’13, 19-20th September 2013, Anna University, Chennai 25.
58. K. Seeni Meera, R. Murali Sankar, S. N. Jaisankar, A. B. Mandal, Bio-renewable Castor oil
basedPolyurethane/Siloxane Cross-Linked Film Structures for Hydrophobic Surfaces, NIICT-
2014, March 2-5th 2014, IICT, Hyderabad, India.
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 13/14
59. A. Murali, N. Haridharan, A. B. Mandal and S. N. Jaisankar, Single electron transfer-living
radical polymerization as a tool for the synthesis of poly(methyl methacrylate) onto carbon
nanotubes: A mimic to bone cement, Royal Society Chemistry-India roadshow and symposia
series, at IIT Madras, 10th November 2014. (Best poster award in Analytical Science).
60. Adhigan Murali, Senthil A. Gurusamy-Thangavelu, Sellamuthu N. Jaisankar,* Synthesis of
nanohybrid based perovskite polyurethane nanocomposite for conductive coatings, Forth
International Conference on Frontiers in Nanoscience and Technology (COCHIN NANO-
2016), held on February 20-23, 2016, Cochin, India.
61. D. Prakash, Sellamuthu N. Jaisankar,* Synthesis and properties of azo-linked polymeric
materials, Forth International Conference on Frontiers in Nanoscience and Technology
(COCHIN NANO-2016), held on February 20-23, 2016, Cochin, India.
62. B. Rajeswari, N. Malarvizhi, Sellamuthu N. Jaisankar,* Melt processing of polyvinyl alcohol
/Amine modi�ed bentonite clay composites: Spectral, thermal and mechanical properties,
Forth International Conference on Frontiers in Nanoscience and Technology (COCHIN
NANO-2016), held on February 20-23, 2016, Cochin, India.
63. D. Prakash, Sellamuthu N. Jaisankar,* Synthesis and properties of azo-linked polymeric
materials, Forth International Conference on Frontiers in Nanoscience and Technology
(COCHIN NANO-2016), held on February 20-23, 2016, Cochin, India.
64. B. Rajeswari, N. Malarvizhi, Sellamuthu N. Jaisankar,* Melt processing of polyvinyl alcohol
/Amine modi�ed bentonite clay composites: Spectral, thermal and mechanical properties,
Forth International Conference on Frontiers in Nanoscience and Technology (COCHIN
NANO-2016), held on February 20-23, 2016, Cochin, India.
65. Prakash, D. and S. N. Jaisankar “An ef�cient synthesis and characterization of nitrogen rich
azo-linked conjugated polymer materials for energy applications” Oral presented in
“International Conference on Advanced Materials Science and Technology (ICAMST - 2017)”
held on 17-19th August 2017 at Department of Physics, Bannari Amman Institute of
Technology, Sathyamangalam, Tamil Nadu, India.
66. Prakash, D. and S. N. Jaisankar “Novel azo-linked dendritic semiconductive polymer
materials: design, morphology, thermal and rheological properties” Poster presented in
“National Conference on Advanced Materials: Processing and Characterization” held on 27th
& 28th February 2017 at Department of Physics, National Institute of Technology,
Tiruchirappalli, India.
67. V. Ramkumar and S.N. Jaisankar., Highly ef�cient color amalgamation system for �ne tuning
of white light-PLEDs using blue and red chromophores, “Innovations in Polymeric Product
Development and Manufacturing” Advancements in Polymeric Materials (APM-2019) at
CIPET, Guindy, Chennai. on 22-24 January 2019.
68. V. Ramkumar, D. Prakash and S.N. Jaisankar., Blending of polymer for color tuning and white
light PLEDs., “24th CRSI- National Symposium in Chemistry., at CSIR-CLRI, Adyar, Chennai on
8-10th February 2019.
69. V. Ramkumar, D. Prakash and S.N. Jaisankar., Preparation and Analysis of White Light
Polymer Light Emitting Diode., Advanced Materials for Catalysis, Energy and Environment
(ICAMEEE - 2019), at Guru Nanak College, Chennai on 21-22nd February 2019.
International conferences: Attended and presented the papers (country visited)
9/21/21, 11:39 PM CLRI
https://www.clri.org/EmployeProfile/74_Dr.S.N.__Jaisankar.html#tab-3 14/14
1. Oral Paper presented at AIChE100/ACS Conference, Spring National Meeting, New Orlands,
USA, April 6-10, 98p, 2008.
2. Visual presentation at 53rd Pentasectional Meeting of the American Chemical Society
(ACS), Duncan, USA, March - 5, 2008.
3. Visual presentation, at XXX CONGRESS OF THE IULTCS, Beijing, China, on the 11-14th of
Oct. 2009.
4. Bilateral Programmes of Academy of Sciences of the Czech Republic (ASCR) and Institute of
Macromolecular Chemistry (IMC), Prague, Czech Republic - Counsil of Scienti�c and
Industrial Research (CSIR) - Central Leather Research Institute (CLRI),Chennai, India, on
Studies on the preparation of soft polymeric gel from the polyurethane ionomers and to
characterize their viscoelastic and rheological properties of the materials. (From 14th
November 2012 to 20th December November 2012).
5. Oral Paper presented at ICMAT-2013 (7th International conference on materials for
advanced technologies-2013) was held at Suntech city, Singapore, from 30/06/2013 to
05/07/2013.
6. Deputation of CSIR-CLRI Experts visit to Leather Industry Development Institute (LIDI),
ETHIOPIA, to teach BSc Leather Technology, from 3rd April 2016 to 29th April 2016.