Embed Size (px)
Citation preview
Product Features� Controller cards provide DS1
drop and insert capability forDS3 networks
� DS1 cross connects betweenboth DS3 interfaces and localDS1 drops
� Hot-swappable controllercards protected with 1:1redundancy
� Optional router providing end-to-end Ethernet extension overa single T1 as well as terminalserver functionality - Ideal forIP-based traffic over TDMbackhauled network
� Remotely managed throughSNMP or Telnet
� DB9 craft interface for accessto user-friendly configurationand performance monitoringmenus
� Comprehensive test andperformance monitoringfeatures
� NEBS Level 3 compliant
� Powered by 24 or 48 volts
� Extended Temperature range,-40°C to 65°C
� MX3208 and MX3216 both usethe same chassis and there-fore expansion can be madewithout switching facilities
ADTRAN’s newest drop and continueM13 multiplexer delivers DS1s directlyto service locations, allowing carriersfull utilization of DS3 bandwidth. TheMX3208 provides up to a full T1 ofbandwidth, accessible at any pointalong the DS3 path, for data Ethernetconnectivity. It costs less than half theprice of other early generation drop andcontinue products.
Drop and insert DS3 networking is prac-
tical and efficient with the ADTRAN MX3208
or MX3216. Packaged in a 1RU, 19-inch
chassis the MX3208 or MX3216 routes DS1s
between the two DS3 interfaces with access
to 8 or 16 DS1s at any node.
The MX3208 interfaces to two coaxial
DS3s and provides the ability to drop and
insert up to 8 DS1 signals from either DS3
interface on the terminal side. The MX3216
provides the same functions as the MX3208
with 16 DS1 signals. The DS1s will be acces-
sible through the champ connector on the
back of the chassis as short haul DSX-1
signals. An RMM can be added as an
optional IP router for Ethernet network exten-
sion throughout the network and
telnet-based terminal server ports.
Drop/Insert DS3 NetworkingMX3208 / MX3216
End-to-end solution Manageable at any point
Manage any element from any
location along a DS3 Path
LAN connectivity at any site
1-8 x T1 MX32081-16 x T1 MX3216
1-8 x T1 MX32081-16 x T1 MX3216
1-8 x T1 MX32081-16 x T1 MX3216
RMM IP TRAFFIC
Drop/Insert DS3 Networking
Specifications are subject to change without notice. ADTRAN is a registeredtrademark of ADTRAN, Inc. All other registered trademarks and trademarks men-tioned in this publication are the property of their respective owners.
Product SpecificationsInterfacesT3 Network Interface� Channelized DS3
� Line build out: No adjustments required 0 to 450 feet� Framing format: M13 and C-bit parity� Line rate: 44.736 Mbps� Line interface: Dual 75 ohm BNC coax female
connectors
DSX-1 Interface(s)� Line build out: 0 to 655 feet� Line rate: 1.544 Mbps� Line code: AMI or B8ZS� Line interface(s): Dual 64-pin amp
connectors
DiagnosticsDS3 Network
� ANSI T1.107 compatible loopbacks� Line loopbacks
DSX-1 Ports � Local and network loopbacks� CSU and NIU loopbacks
Mechanical � Dimensions: 1.7 in. H X 8.6 in. D X 17 in. W � Weight: 5.5 lb (fully redundant)
Clocking� Network: Receive from DS3 network� Local: Internally generated
Alarms� External alarm contacts for critical and
non-critical alarms� Normally open pinout� Front panel alarm cutoff switch
Electrical� Power: 24 VDC or 48 VDC, 18 W
Regulatory Standards� NEBS Level 3� UL 60950 and ETL
MX3208 / MX3216
ManagementVT100 Terminal Interface
� EIA-232 compatible, female DB-9 adapter provided
Optional MX3RMM Remote Management Module� Up to two DS1 interfaces can be dropped from the
Controller, and used in T1 or FT1 mode� Uses PPP across T1/FT1 channel� Provides ability to remotely manage the MX3 system
using 10Base-T/100Base-TX Ethernet Interface� Four Terminal Server ports (RS232 Tx and Rx using
RJ45 jack) - accessed via a telnet session to userdefinable TCP port number
SNMP/Telnet� Integrated 10//100 Base-T Ethernet� MIB II, RFC 1213 and 1407 compliant� ADTRAN Enterprise MIB for extended
monitoring and control/configuration
Environmental� Operating temperature: –40°C to 65°C� Storage temperature: –20°C to 85°C� Relative humidity: meets GR63
Product Includes� Mounting ears for 19-in. and 23-in. racks
Ordering InformationEquipment Part #MX3 Housing 1189001L1MX3208 DS3 Card, 8 DSX-1 ports 1189002L1MX3 IP Router with 4-port terminal 1189004L1MX3216 DS3 Card, 16 DSX-1 ports 1189008L1
6118900xL1-8A December 2004Copyright©2004 ADTRAN, Inc.
All rights reserved.
ADTRAN, Inc.901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000Huntsville, AL 35814-4000
256 963 8000 voice256 963 8030 fax
877 457 5007 fax back
General Information800 9ADTRAN
Pre-Sales Technical Support
888 5ADTRAN [email protected]
www.adtran.com/support
Where to Buy800 827 0807
www.adtran.com/where2buy
Post-Sales Technical Support
800 726 [email protected]
www.adtran.com/support
Regional OfficesDallas, TX
972 830 9070Denver, CO
303 471 9150Kansas City, KS
800 471 8649Newark, NJ800 471 8656
Ontario, Canada416 290 0585
Quebec, Canada877 923 8726
San Antonio, TX888 223 7671
International Inquiries+1 256 963 8716 voice
+1 256 963 6300 [email protected]
www.adtran.com/international
ADTRAN is a TL 9000 registered company.
ADTRAN is an ISO 9001:2000 registered company.
