Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Industrial Porous FiltrationMetal Products
Driving Industrial Solutions
Poral®
Your partner for porous sintered metal elements and customized solutions
2
Since its establishment in 1958, Poral® has acquired worldwide recognition in development, manufacturing and use of porous metals for filtration and diffusional applications or requirements.
We provide a wide range of porous metal product solutions including filters, diffusers and silencers, which can be cleaned and re-used extending the product life and minimizing the need for replacements.
Poral® customers are market leaders in many different industries. No matter if you need standard shapes and fittings or customized filter solutions, we will be your partner to provide or develop the right product to meet your requirements.
Rely On Us
Experienced Engineering Team
Extended Product Life Cycle
Poral® application engineers provide support every step of the way: - Material selection- Design: standard or customized to your individual needs- Assembly of ends and fittings- Calculation of pressure drop and flow rates- Integration of feasibility studies for filtration systems
- Chemical stability- Mechanical resistance - Differential pressure capability- Resistance to corrosion- Stability over a wide temperature range- Easy cleaning for significant operational cost savings by reverse flushing with a clean fluid, by appropriate solvents, chemical reagents or ultrasonic washing by calcining
High Filtration Performance- Precise filtration (up to 0.5 µm in gas and 4.5 µm in liquid) for standard products- Homogeneity of porous wall- Large portfolio of alloys: Stainless steel (304L & 316L), Monel 400, Inconel 600, Hastelloy X & C276 and Bronze 90/10
Highest Quality Standards- ISO 14001, OHSAS 18001, ISO/TS 16949 and ISO 9001
Used in Various Applications- Aeration- Breathers / Pressure equalization- Flame arrester- Carbonation- Diffusion- Fermentation- Filtration- Flow / Restriction Control- Fluidizing- Noise attenuation- Oxygenation / Oxygen swtripping- Particle flotation- Silencer- Sparging- Voluntary drop pressure
3
4
Answering Industrial Needs
Market and ApplicationsFederal-Mogul provides superior solutions for different industries worldwide.
Aeronautic, Space & Military- Kerozene filtration
Biotechnology- Bacterial filtration
Chemical & Petrochemical- Cryogenic fluids,corrosive liquids and gases
Food & Beverage- Aeration, carbonation, hydrogenation,oxygen stripping, nitrogen diffusion
Mechanical & Construction- Hydraulic filtration, silencers
Nuclear- Cooling water filtration
Pharmaceutic, Chemical & Perfume- Decolorization, separation, centrifugation
Plastics- Gas evacuation
Pneumatic- Silencer, flow regulation and restriction
Water Treatment- Ozone diffusion, purification
Welding Device, Metrology,Instrumentation, Valves & Trapes- Flame arresters, protective device for sensors, diffusers for chromatograph
Solutions to ManyConditions
5
How to Choose Poral® Grade
Selecting Proper Filter MaterialBronze is offered whenever stainless steel is not mandatory; this material enables a lower pressure drop, and high resistance to heat and differential pressures
Stainless 304L & 316L steels are very low carbon content providing a high resistance to sulfuric acid and caustic soda solutions
Monel 400 is suitable for use with chlorine and fluorine compounds, low concentration of sulfuric acid and caustic soda solutions
Inconel 600 is highly resistant to oxidizing acid solutions at elevated temperatures
Hastelloy X is suitable for oxidized solutions and high temperature applications (up to 800°C)
The life of a Poral® unit in a corrosive environment may vary considerably, depending on the operating conditions. Experimental testing is often required to define the rate of corrosion.
- Any fluid, liquid or gas
- Corrosive environment
- Temperature up to 800˚ C
- Differential pressure up to 150 bars on stainless steel tubes
- Micro (0,5 to 1 μm) and particle (1 to 300 μm) filtration or separation
- Diffusion (gas into liquid, gas into gas, etc.)
- Pressure drop to protect equipment
- Flame arrester
- Silencer
- Flow rate equalizer
When to Use a Poral® Filter
Poral® Classification BRONZE 03 05 07 10 15 20 30 40 60
Liquid Size of particles (μm)
Gas Size of particles (μm)
5 22 30 39 60 97 135 185 270
1 3 5 7,5 12 14 20 26 35
4,5 9 16 24 37 58 90 130
0,5 1,2 2,3 3,6 6 8,6 13 20
Poral® Classification STAINLESS STEEL 03 05 07 10 15 20 30 40
Liquid Size of particles (μm)
Gas Size of particles (μm)
Test conditions: Liquid - Water separation test according to ISO 4572 Gas - Separation of dry dust in an air flow of 18 l/hr/sq.cm
99.9% of particles with a size equal or greater than the ones shown in the tables below are filtered
BronzeShapes & Fittings
6
All Poral® standard dimensions can be found at www.federalmogul.com/poral
Diameter: 10 mm to 34 mmMax Length: 22.5 mm or up to 74 mm
Bronze Silencers (SMH)
Diameter: up to 500x500 mm or up to 300x600 mmThickness: 2 mm, 3 mm, 5 mm
Bronze Plates (BK)
Diameter: up to 250 mmThickness: 1.5 mm to 5.5 mm
Bronze Discs (BC)
Diameter: 4 mm to 27 mmHeight: 10 mm to 80 mm
Bronze Cones (BCN)
Diameter: 26 mm to 32 mmMax Length: up to 250 mm
Bronze Seamless Tubes (BLR)
Diameter: 50 mm to 100 mmMax Length: up to 600 mm
Bronze Welded Tubes (BT)
Diameter: 30 mm to 130 mmMax Length: 600 mm or longer with weld
Bronze Cartridges (CRB)
Standard welding process for Bronze is tin welding. Electrical welding available upon request.
Stainless SteelShapes & Fittings
7
Our engineers are experienced in custom sizes. Contact us for details.
Diameter: 14 mm to 110 mmMax Length: 1100 mm or up to 3000 mm
Stainless Steel Cartridge (CRI)
Diameter: 14 mm to 110 mmMax Length without welding: 1100 mm
Stainless Steel Multi Cartridges (CFI)
Diameter: 14 mm to 110 mmMax Length: 1100 mm or up to 3000 mm
Stainless Steel Candles (BI)
Diameter: 14 mm to 110 mmMax Length: 1100 mm or up to 3000 mm
Stainless Steel Tubes (IS)Diameter: up to 500x500 mm or up to 300x600 mmThickness: 2 mm, 3 mm, 5 mm
Stainless Steel Plates (IK)
Diameter: up to 250 mmThickness: 1.5 mm to 5.5 mm
Stainless Steel Discs (IC)
Diameter: 8 mm to 30 mmHeight: 20 mm to 59 mm
Stainless Steel Cones (ICN)
Standard welding process for Stainless Steel is electric welding
Federal-Mogul Sintertech SASVoie des Collines38800 Le Pont-de-ClaixFRANCE
Tel: +33 (0) 4.76.99.04.41Fax: +33 (0) [email protected]
www.federalmogul.com/Poral
Poral EN 05.2012 1.000