1

Pump POP Placement for All Sites (Exceptions: NY, NJ & other sites that can NOT display crind strips)

Driver Rewards Brochure in Canister on Pump

Crind Strip

Graphic for canister top

2

NY, NJ & Other Sites that Can NOT Display Crind Strips

Driver Rewards Brochure in Canister on Pump

Invert

Graphic for canister top

3

Installation Instructions for BP Visa Application Canisters on Canopy Poles – NOT ON PUMP FRONT

• Peel the paper backing from the adhesive strips on the holder backer.

• Place the holder on the Canopy Pole 4 feet from the ground so the top of the canister is at eye level, about 5 feet fromthe ground.

• Press the backer firmly against the pole and hold for 10 seconds, making sure all tape pads are securely adhered.

• Slide the holder front (the clear acrylic cover) onto the backer.

• Place the BP Visa applications inside.

Pump Canister Graphic Installation Instructions

4

• Peel the paper backing from the adhesive strips on the clip.

• Press the clip firmly against the canister and hold for 10 seconds, making sure it’s securely adhered.

• Insert bottom of canister violator into the clip and ensure a snug fit.