DRILLING INNOVATIONS AND ADVANCED TECHNOLOGIESingeos.ru/doc/presentation-of-investgeoservice.pdf · DRILLING INNOVATIONS AND ADVANCED TECHNOLOGIES 10 . INVESTGEOSERVIS is a highly

DRILLING INNOVATIONS AND ADVANCED TECHNOLOGIES


INVESTGEOSERVIS

RIG FLEET

ENGINEERING AND TECHNOLOGY CENTER

HSE

CONTENTS

CUSTOMERS OUR PROJECTS

INVESTGEOSERVIS ABOUT THE COMPANY

The group of companies INVESTGEOSERVIS realizes a complete cycle of oil and gas wells construction of any complexity, design and purpose, including extended reach (ERD) wells and multilateral wells, on the terms a customer requires, namely:

Master contract (Lump Sum) – includes works concerning project documentation development, construction of access routes and drill/cluster pads, Rigging up, drilling, rendering drilling services, wells suspension/ abandonment, land rehabilitation and delivery to the monitoring authorities.

Daily rate drilling – rendering services of well drilling providing rig crews and/or drilling units of various capacity.

Project management – services concerning management of onshore well. A range of services regarding project management is selected based on the customer’s current requirements. The PM services include, without limitation, the following principal areas: participation in the project documentation development, management and control of all processes and work types at the well, cost control and optimization, engineering, technology, supervising, logistics, supplies, and consulting in HSE (occupational health, industrial safety and environmental protection) area.


1

Drilling technological services rendering: • cementing • MWD • drilling fluids

ENGINEERING CENTER Drilling process support

25 employees

IGS-TECHNOLOGIA Technological services

103 employees

IGS-NEU Rig contractor

1189 employees

TYUMENGEOLOGIA Well completion and stimulation

77 employees

JSC INVESTGEOSERVIS Master contractor for well construction

205 employees

IGS-AVTO Logistics and transportation

452 employees

MANAGEMENT BOARD OF IGS GROUP

Damir Tuktarov CEO

Svetlana Kochuhova

CFO

Alexandr Kosov

Executive Director

Andrey Zhutov Commercial Director

STRUCTURE OF GC INVESTGEOSERVIS


2

ENGINEERING AND TECHNOLOGY CENTER

PROJECT HEAD MANAGER

CHIEF ENGINEER

CUSTOMER

UNSOLVABLE CHALLENGES DO NOT EXIST

LOGISTICS SPECIALIST GEOLOGIST ECONOMIST HSE TECHNO-LOGIST

SITE MANAGER

SUPERVISOR

LAWYER


3

PROJECT MANAGEMENT

STRUCTURE

ENGINEERING AND

TECHNOLOGY CENTER

OBJECTIVES OF THE CENTER On November 17, 2011, the Engineering and Technology Center (ETC) of GC INVESTGEOSERVIS was opened in Tyumen and in 2013 it was transferred over to Moscow. ETC that is a unique project for Russian in many respects is equipped in a state-of-the-art manner and designed to draw competitive advantage at the stage of the wells design and construction. The ETC task is to minimize operational risks through the project quality enhancement and by means of the online professional technological support of the wells construction process rendered by the center’s competent personnel and the works performance control.

ENGINEERING DESIGN ETC takes part in the preparation of a technical assignment for well design. Technological department of the ETC works through the modern technical and engineering solutions planned to be implemented in the well construction process. At this stage, the ETC issues a documentation that is approved by the customer, is compliant with the formation’s geological structure and includes technical and engineering solutions requisite for the high-quality well construction.


4

HSE INVESTGEOSERVIS is implementing Corporate Social Responsibility policy whereby a business monitors and ensures its active compliance with the spirit of the law, environmental, ethical standards and international norms. This commitment adds value to employees, customers, shareholders and communities.

In 2014, the rig crew personnel has undergone training on the well management in failures and emissions according to the international standard International World Control Forum.

Personal protective equipment by the leading global manufacturers of PPE is used in the project works.

INVESTGEOSERVIS has certificates required for operations performance: • ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007 • IADC certificate • Certificate of the Rig Contractors Association • Euro Standart compliance certificate.

INVESTGEOSERVIS IS AN ENVIRONMENT-FRIENDLY ENTERPRISE WHOSE IMAGE IS BASED ON THE TRUST OF CUSTOMERS, PARTNERS, CLIENTS AND POPULATION IN THE REGIONS THE COMPANY OPERATES.

NO HARM TO THE ENVIRONMENT


5

Q-TY RIG

STATIC

HOOK LOAD

CAPACITY,

TONS

DRAWWORKS

CAPACITY,

H.P.

MUD PUMPS

TOP DRIVE,

LOAD RATING,

TONS

2 BU 6500/450

SCR 562 2500 3 х 3NB-1600F 500

4 BU Arctica

6000/400 SCR 500 2000 3 х 3NB-1600F 500 / 750

7 ZJ-50DBS 400 1500 2 х 3NB-1600F 350 / 500

1 BU 4500/270 AC 350 1500 2 х 3NB-1600F 500 / 750

7 ZJ-40 225 1000 2 х 3NB-1000F 250

2 ZJ-30 180 750 2 х F-500 250

6 3D-76 / 86 400 1000 2 х UNB-600 -


6

Within the period 2013-2020, JSC INVESTGEOSERVIS shall drill 134 wells. Three rigs BU 6000/400 SCR “ARCTICA” (2000 HP). Failure-free operation in arctic conditions of complete self-sufficiency at the temperature down to -60°С and wind velocity 20 m/s. A complex logistic scheme is implemented that allowed delivering 20,000 tons of cargo per year in the shortest time possible.

YAMAL LNG 7-year Lump Sum contract for 134

horizontal wells (horizon up to 1500 m)

OUR

PROJECTS


7

In last three years seven super-deep wells have been successfully drilled in the Yamal 6,500 to 8,500 meters MD.

The longest ERD well in the mainland part of Russia – 8,497 meters long with step out of 7,059 meters.

Engineering and technological center of INVESTGEOSERVIS has participated directly in the ERD wells engineering design and executed engineering calculations and selection of requisite technologies and materials.

The following technologies have been employed in constructions: • Latest-generation rotary-steerable systems • Online Logging-while-drilling (LWD) gauges • Real-time geomechanical support • Lowering the casing columns with constant

rotation and circulation • Hydraulic reaming pad device for the casing

column • Equipment for transportation column rotation

independently from the tail pipe.

NOVATEK-

YURKHAROVNEFTEGAS 8500 m MD

OUR

PROJECTS


8

Reduction of the construction time by half within 3 years. Working on the project since 2009. Three Rigs with Hook load capacity 400 tons (1500 HP) “en echelon”. 15 wells a year with a horizontal section up to 1500 m with hi-end LWD technology. Complex profiles of wells with a high azimuth slew.

Reduction of the construction time by half

OUR

PROJECTS

NOVATEK-

YURKHAROVNEFTEGAS


9

Working on a project at the Kuyumbinskoe field in Krasnoyarsk Krai since 2014. 1 drilling rig 6000/400 SCR (2000 HP) “ARCTICA” and 3 drilling rigs ZJ-50 DBS (1500 HP) are engaged. Drilling facilities have been mobilized in the shortest possible time for a distance of

4,500 km in the no-road and complex

logistic scheme conditions. A well with a target depth of 3,723 meters TVD and a horizontal sidetrack has been drilled by 12% faster than the competitors’ ones.

Drilling in no-returns conditions

4,500 KM 10,000 TONS

OUR

PROJECTS

SLAVNEFT-

KRASNOYARSK NG


10

INVESTGEOSERVIS is a highly qualified master contractor for well construction at the sites of ROSNEFT.

Conquering Eastern Siberia

Working for ROSNEFT project since 2014.

Five mobile drilling units 1000 HP

Drilling of sidetracks up to 1,650 meters long.

2015 – we have drilled the vertical exploration wells up to 4,400 meters deep.

3 years contract for VOSTSIBNEFTEGAZ project within the period 2017-2019.

Drilling rig ZJ-50 DBS (1500 HP) is engaged.

The prospect of mobilizing additional rigs to the project.

OUR

PROJECTS ROSNEFT


11

Works on the project started in 2012. 2-7 drilling units ZJ-50 DBS (1500 HP) are engaged. Drilling of wells with the anomaly ratio of 2.1. Using hi-end LWD

Horizon section up to 1500 m

OUR

PROJECTS ARKTIKGAZ


12

Rendering consultation services to the customer when executing contracts.

Competent personnel that is certified according to BOSIET, IWCF and H2S standards.

Auditing SEFDR (self-elevating floating drilling rig) leased in Tunisia, including equipment, systems and the personnel competence.

Organization of a tender on selection of service contractors by a service type.

Development of drilling works performance programs.

Assessment and selection of equipment and materials suppliers.

Round-the-clock control over well construction works in accordance with the drilling program.

Cost management (Cost engineering). Drill management (Drill engineering).

Our offshore presence

OUR

PROJECTS

GASPROMNEFT-

SAKHALIN


13

CUSTOMERS


14

JSC INVESTGEOSERVIS

Address: 10А, 60-letia Oktyabrya Avenue, 117036, Moscow, Russia

, Tel.: (499) 750-0113 Fax: (499) 750-0114

E-mail: [email protected]

www.ingeos.ru

ingeos.ru

CONTACTS


15


Documents

DRILLING INNOVATIONS AND ADVANCED TECHNOLOGIESingeos.ru/doc/presentation-of-investgeoservice.pdf · DRILLING INNOVATIONS AND ADVANCED TECHNOLOGIES 10 . INVESTGEOSERVIS is a highly