Upload
duongdiep
View
218
Download
0
Embed Size (px)
Citation preview
Dragon 1By Louis
the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014
Final
Using this stencil you can create your own dragon! With 4 sticks of plastic and less than a half hour you can bring this creature from mythology to reality! This is just the start though, think of this �nishedstencil as your blank sheet of paper to let your mind run wild on! But instead of a blank sheet of paper,its a 3D dragon that can be added to, modi�ed, enhanced and changed any way you see �t!Extra wings? Done. Bigger claws? Done. Fire breath? Done!
You’ll eventually need a fearless knight to duel the beast as well... Good thing you have your 3Doodler!
the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014
Dragon 1By Louis
the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014
Step 1 Step 2
Step 5 Step 6
Step 3 Step 4
Assemble the pieces of the head.Print out the stencil, trace the pieces and �ll them in
Assemble the lower jaw and attach it to the top of the head.
Attach the neck to the body.
Build up the sides of the body where the legs will attach. Attach the legs.
Dragon 1By Louis
the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014
the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014
Dragon 1By Louis
the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014
Step 7 Step 8
Step 11
Step 9 Step 10
Attach the feet to the bottoms of the legs.Make sure they’re evenly spaced.
Get those claws in place! Attach the tail so that it swings out to the side.
Don’t forget the wings!
Step 11
Finally, attach the head. Now it’s time to make ityour own!