DRAFT INTERNAL SIGNAGE GUIDELINES - Curtin University · signage elements. Curtin logo - Colour positive Curtin logo - Colour positive with keyline In some instances the Curtin full-colour

DRAFT

Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020

INTERNAL

MAY 2020

SIGNAGEGUIDELINES

Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 2

CONTENTS

Sign Type Description Page Image

Signage Standard - 1

Directories

DR.1 Directory 12

Wayfinding

WW.1 Wayfinding - Wall Mounted 13

WS.1 Wayfinding - Suspended 14

Description Page

Overview 3

Curtin Logo 4

Typography: Sansa Soft Pro 5

Typography: Helvetica 6

Typography: Univers Condensed 7

Icons 8

Colour 9


Identification

ID.1.1A Identification - 1A (solid door with Latch) 15 & 16

ID.1.1B Identification - Type 1B (solid door with lock) 15 & 17

ID.1.1C Identification - Type 1C (glazed door with mullion) 15 & 18

ID.1.2 Identification - Type 2 (Vinyl Graphics) 19

Miscellaneous

RC.1 Room Capacity 20


CONTENTS


Signage Standard - 2

Wayfinding

WS.2 Wayfinding - Suspended 22

WW.2 Wayfinding - Wall Mounted 24

Identification Signage

ID.2.1A Identification - 1A (solid door with Latch) 26 & 27

ID.2.1B Identification - Type 1B (glazed door) 26 & 28

ID.2.2 Identification - Type 2 (125 Lettering) 29

IDC.2 Identification - Cantilevered 31


Facility Signage

FW.2 Facility - Wall Mounted 32

FC.2 Facility - Cantilevered 35

Statutory

ST.2.1 Statutory - Type 1 (23mm) 36

ST.2.2 Statutory - Type 1 (50mm) 38

FEC.2 Fire Extinguisher - Cantilevered 40

FEW.2 Fire Extinguisher - Wall Mounted 41


Sign Selection

The signage family has been designed to ensure sufficient flexibility, which will suit the majority of Curtin University signage requirements. The internal hierarchy proposed should provide a suitable selection for each user requirements.

The Signage Guideline standards were created to bring harmony, consistency and ensure quality construction replication to appropriately reflect the Curtin University brand image.

Project Specific

This document does not contain a the full list of signage installed at Curtin. If you can’t find what you’re looking for please contact :

Properties, Facilities and Development, Curtin University (08) 9266 2020

Sign Location

Signs must be visible and legible for all users. Sign fixing heights play an important role in the legibility of information.

It is important signs are located where they will not cause any obstruction, or be obscured.

The orientation of the sign will be specific to its purpose and location.

The success of this signage system will be reliant upon compliance with these signage guidelines, and appropriate masterplanning for each Campus.

Use of a Wayfinding Consultant

It is noted some interpretation of the signage design guidelines will be required to suit unique requirements of a particular project and may require the assistance from a qualified wayfinding consultant.

Refer to the Technical Stakeholder for Signage if you require contact details of Consultants who have worked for the University.

Materials, Finishes & Fixings

The signage design and material selection was carefully considered.

The finish of the sign face can have a significant impact on the legibility of information. The proximity of light sources to signs can also play an important role and gloss factors must be considered when specifying materials.

Good quality materials, finishes and fixtures should be selected to ensure longevity and a lasting quality appearance.

The nominated signage contractor must comply with the design intent drawings specified in this signage manual to ensure a consistent and high quality result. Any alteration or amendment to these drawings will require consultation and approval before production.

The signage family is a combination of non-proprietary and proprietary signage items. All internal proprietary signage items have been documented in the following pages.

Quality Assurance

Experience

> Signage contractors shall provide evidence that they have a minimum of 5 years experience, and are currently and regularly manufacturing signs similar to those specified in this Manual. Signage contractors will be required to demonstrate experience when quoting on project works.

Planning, Production & Installation

> Manufacturer’s Product Data sheets and shop drawings shall be required for each item specified, for approval by Curtin University prior to fabrication.

> All items in schedules are to be checked. The signage contractor is to provide an updated message list for each sign, including exact room name, room number, graphic symbol (if any) and Braille (toilet signs only), and indicate the location of each sign on a floor plan.

> Samples shall be specifically required for non-specified products submitted as a substitution to the signage items documented (if approved by the project team).

> Signage items are to be installed at the correct heights documented in this signage manual. Any deviations due to service clashes are required to be approved prior to installation.

Delivery & Storage

All signage items must be stored and delivered in protective packaging. Replacement of damaged items will be required.

The signage family has been designed to ensure sufficient flexibility, which will suit the majority of Curtin University signage requirements. These Internal Signage Guidelines were created to bring harmony, consistency and ensure quality construction replication to appropriately reflect the Curtin University brand image.

OVERVIEW


CURTIN LOGO

The corporate Curtin logo is a very important asset of the organisation. It provides a legal trademark and guarantee of quality for all the products and services that carry the mark. It is also the visual expression of the brand and as such must be valued and used in accordance with these signage guidelines.

The corporate logo is made up of two elements, locked together in a predefined arrangement:

1. The name ‘Curtin University’ within the black bar

2. The ‘shield’

It should never be altered from its original format or embellished with other symbols or colours.

The minimum length the logo can be used is 25.

It is available electronically upon request from University Marketing, email: [email protected]

>> Principle

The Curtin University logo typically appears in reverse on signage elements.

Curtin logo - Colour positive Curtin logo - Colour positive with keyline

In some instances the Curtin full-colour keyline logo needs to be applied to differentiate the logo from the background.

File Name

Logo_CurtinUni_PMS125.eps

2. The name ‘Curtin University’ within the black bar2. The name ‘Curtin University’ within the black bar1. The ‘shield’

Minimum size: 25

25

2. The name ‘Curtin University’ within the black bar1. The ‘shield’

18

Curtin master brandcontinued

Where it is not possible to use the full-colour logo, select Curtin logo mono positive.

On light backgrounds where the tonal value is below 80 per cent, the mono positive version should be used.

Curtin logo – mono positiveFor use in monochromatic applications

Curtin logo – mono positive with keylineFor use in monochromatic applications

The minimum allowable contrast between the logo and background should be at least 80 per cent tonal value.

To access Curtin logo assets, visit the brand site, brand.curtin.edu.au

The name ‘Curtin University’ within the black bar

The ‘shield’ The ‘shield’

The name ‘Curtin University’ within the black bar

20% 30% 40% 50% 60% 70% 80% 90%10%0% 100%


TYPOGRAPHY:SANSA SOFT PRO

The type family Curtin Sansa Soft Pro has been specially developed for use in marketing counications and signage by Curtin.

The Curtin Sansa Soft Pro normal has been selected for the primary content of all identification signage and projects the contemporary values of Curtin.

This typeface is elegant, practical and satisfies fully functional and connotative requirements. It is effective in signage and its clarity and legibility helps convey a distinctive corporate identity through its modern, sophisticated, elegant, international look. It is easily recognisable and expresses both practicality and humanism and complement contemporary design values.

Upper case and lower case are used to create a typographic hierarchy. Upper case is used for all headings, primary and secondary with operational information illustrated in lower case.

Curtin Sansa Soft Pro Normal is used on most signage applications.

>> Principle

Curtin Sansa Soft Pro Normal is used on signtypes within Signage Standard - 2.

Sansa Soft Pro NormalabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@

Sansa Soft Pro BoldabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@


TYPOGRAPHY:HELVETICA

>> Principle

Helvetica is used on signtypes within Signage Standard - 1 Helvetica

abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@

Helvetica BoldabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@


TYPOGRAPHY:UNIVERS CONDENSED

>> Principle

Univers Condensed is used on signtypes within Signage Standard - 1

Univers CondensedabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@

Univers Bold CondensedabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@


The following internationally recognised icons should appear uniformly throughout the Curtin University signage system.

Refer to the following pages for details relating to placement and sizing for each signtype.

Any new additional icons not shown opposite are required to be submitted to Curtin University for approval prior to use on any signage elements.

>> Principle

Only use a symbol if users will already know its meaning when they enter, without anyone needing to explain it.

Icons appear on signage with an outline to reveal the background colour of the sign.

Unisex Female Male

ICONS

Accessible Accessible

Stair Mobility Scooter Parking

Baby ChangeLift

Female Male Shower

All Gender Parents Room

First Aid


COLOUR

Whenever reproducing colour always refer to the appropriate colour specifications for the chosen media, relying on PANTONE chips or the current PANTONE colours standard listed in the latest edition of the PANTONE Colour Formula Guide to match colour.

The specifications here cover most print and on-screen requirements.

Curtin Grey Curtin Gold Curtin Black White

Spot Colour Coated Paper Pantone Cool Grey 8C Pantone 125C Pantone Process Black C White Uncoated Paper Pantone Cool Grey 8U Pantone 125U Pantone Process Black U

Process Colour C 0 C 0 C 0 C 0 M 0 M 23.5 M 0 M 0 Y 0 Y 100 Y 0 Y 0 K 40 K 27.5 K 100 K 0

RGB R 145 R 181 R 61 G 146 G 140 G 51 B 150 B 10 B 43

Web safe Hex # 999999 Hex # B58B0B Hex # 000000

Dulux Colour (or match) Flooded Gum PG2C3 Balsam Pear P16 F9 Black PG1 A9 Vivid White

Vinyl Colours Calon Medium Grey 50 Calon Gold Metallic 04 Calon Black 03 Calon Matt White Vinyl OR Calon Imitation Gold 59 OR Matt Black 40


SIGNAGE STANDARD - 1

1


DR.1 DIRECTORY

Front Elevation

Scale 1:10

S2K Architectural Modular Series - 3000 Series Slats

740

105

861

105

42

45 4555

Optional Header

Charcoal Metallic background with Anodised Aluminium text showing through @55 high


Charcoal Metallic vinyl text @22 high

Office of the Pro Vice-Chancellor 4 Pro Vice-Chancellor Faculty Business Manager Dean, Teaching and Learning Dean, Research and Graduate Studies Dean, InternationalFaculty Student Services Office (FSSO) 2

ATN Centre for Metabolic Fitness 4WACHPR (WA Centre for Health Promotion Research) 4Reception and Aministration 3Head of School 3Centre for Food Science Research 3Kagawa Nutrition University 3C-MARC (Curtin-Monash Accident Research Centre) 2School Laboratories 1

CHIRI Director 4Centre for International Health 4Centre for Chronic Disease Research 2Centre for Population Health Research 2

Font

Univers Bold Condensed 210pt

Font


FACULTY OF HEALTH SCIENCES

Font


FACULTY OFFICES SCHOOL OF PUBLIC HEALTH

Office of the Pro Vice-Chancellor 4 Pro Vice-Chancellor Faculty Business Manager Dean, Teaching and Learning Dean, Research and Graduate Studies Dean, InternationalFaculty Student Services Office (FSSO) 2

ATN Centre for Metabolic Fitness 4WACHPR (WA Centre for Health Promotion Research) 4Reception and Aministration 3Head of School 3Centre for Food Science Research 3Kagawa Nutrition University 3C-MARC (Curtin-Monash Accident Research Centre) 2School Laboratories 1

CHIRI Director 4Centre for International Health 4Centre for Chronic Disease Research 2Centre for Population Health Research 2

FACULTY OF HEALTH SCIENCES

FACULTY OFFICES SCHOOL OF PUBLIC HEALTH

Photo ReferenceS

Installation Guide

Scale 1:20

1600 centreline


Photo ReferenceS

Room 351 CBS Service TeamRooms 305-320 & 342-345Rooms 302 & 333-348

Installation Guide

Scale 1:20

Setup principle also applies to Type 1 Primary Directory

Front Elevation

Scale 1:5


740

1600 centreline




105

42

42

42

LEVEL 2

LEVEL 2

Font


Font


WW.1WAYFINDING - WALL MOUNTED



WS.1WAYFINDING - SUSPENDED


740

Installation Guide

Scale 1:20

ceiling

ground

ceiling

Minimum 2400 to the underside

Check with client if this is not possible



Info maybe double sided, ensure arrow directions

LEVEL 2 LEVEL 2

Font


Font


Front Elevation

Scale 1:5


105

42

42

42

Photo ReferenceS


Front Elevation - Left Aligned Handle

Scale 1:5

Front Elevation - Right Aligned Handle

Scale 1:5

90 (FIXED) 600 (VARIES)Currently not all doors have the same length name plate holder.

Confirm on site for each door application

centrecentre

690 (VARIES)As per note above

32 CHEMISTRY LABORATORY

CHEMISTRY LABORATORY

125

125

Font: Not all buildings have the same font. Contractor to confirm font for specific buildings following site review.

Helvetica Bold - 53pt

Text must be engraved @14 high

Silver metallic rowmark (to fit 32 extrusion) on black engraving plastic, clear anodised ticket strip.

Removable room name

Permanently fixed door number flips to align with door handle.

Permanently fixed door number flips to align with door handle.

ID.1.1IDENTIFICATION (DOOR SLIDER)


Installation Guide: Right Aligned Handle

Scale 1:20

Example: Solid door with latch

Installation Guide: Left Aligned Handle

Scale 1:20

Example: Solid door with latch

Align sign to same side as door latch

Align sign to same side as door latch

Align to top of door handle plate.

Photo ReferenceS

ID.1.1AIDENTIFICATION - TYPE 1A (SOLID DOOR WITH LATCH)



Scale 1:20

Example: Solid door with lock only


Scale 1:20

Example: Solid door with lock only

Align sign to same side as keyhole

Align sign to same side as keyhole


Photo ReferenceS

ID.1.1BIDENTIFICATION - TYPE 1B (SOLID DOOR WITH LOCK)


ID.1.1CIDENTIFICATION - TYPE 1C (GLAZED DOOR WITH MULLION)

Photo ReferenceS


Scale 1:20

Example: Glazed door with mullion


Scale 1:20

Example: Glazed door with mullion

Sign to line up with glass door width


Sign to line up with glass door width


ID.1.2IDENTIFICATION - TYPE 2 (VINYL GRAPHICS)

Installation Guide

Scale 1:20

Vinyl graphic to line adjacent to door handle. Adjust alignment when handle is on right / left side.

NOTE: Text will be specific to room or building.

Minimum margin 50 from glazing edge (check for obscuring issues)

Front Elevation

Scale 1:2

Fabrication Specs

Graphics / text to be matt opaque white vinyl - 3M.

NOTE: if vinyl is applied to solid door adjust colour to ensure 30% contrast with background. Confirm with Client representative of any change.

Font

Univers Bold Condensed - 118pt

CHEMISTRY LABORATORY12530

30

15

Photo ReferenceS


Fabrication Specs

3mm clear acrylic panel

Reverse cut black vinyl letters backed with yellow vinyl - Primrose Yellow (Arlon).

Double sided tape to rear. Soft edges.

Example only

300

150

RC.1ROOM CAPACITY

Photo ReferenceS

Installation Guide

Scale 1:20

Front Elevation - Layout A

Scale 1:2

centre

Font

Helvetica Bold 146pt

Capacity number to suit specific location. Confirm on site prior to production.

Font

Helvetica Bold 70pt

50


SIGNAGE STANDARD - 2

2


ceiling

1100

110 990

100 (to be confirmed for each level)

100

10075

12.5

12.5

5 (spacer)

TEXT HERE

TOILETS

Fabrication Specs

5 Aluminium panel (or equivalent), with fronts 2 pack painted to match Pantone Cool Grey 8.

Black and white vinyl lettering / arrow and icon details applied over sign panel.

Signage to be suspended from ceiling with 1.5 stainless cable, with suitable 5 spacer between panels.

Contractor required to provide shop drawings of fixing methods.

25

25

50 70

25


Front Elevation

Scale 1:5

Font

Sansa Soft Pro Normal 170pt. Kerning: -15


TOILETS

TEXT HERE

TEXT HERE

TEXT HERE

TEXT HERE

TOILETS

ceiling

ceiling

ceiling

Single Panel Example

Double Panel Example

Triple Panel Example

Photo ReferenceS










1100Front View

Back View

110

25

25

990

100

10075

12.5

12.5

5 (gap)

TEXT HERE

TOILETS

25

25

50 70

25

Side View

15 3

Elevations

Scale 1:5 Fabrication Specs

3 Aluminium panel (or equal equivalent), with all sides 2 pack painted to match Pantone Cool Grey 8.

Black vinyl to wrap top and bottom of sign for a neat finish. Satin Clear coat over.

3M matt cast white vinyl lettering / arrow and icon details applied over sign panel.

Signage to be wall mounted with 15 backing panel (inset 25 from all edges). Concealed fixings. Paint black.

5 gap between panels.

Contractor required to provide shop drawings of fixing methods.

Font



F.I.L.M 202, 206

COLLABORATIVE POD 203, 205

TOILETS

F.I.L.M 211, 218

COLLABORATIVE POD 212 - 217

1500 AFL - Varies

250

2.40

Installation Guide

Scale 1:20

Photo ReferenceS



ID.2.1IDENTIFICATION - TYPE 1

Installation Guide

Scale 1:X

Front Elevation: Layout B

Scale 1:4

Front Elevation: Layout A

Scale 1:4

If no room number is required, delete number, but black panel remains

210 STAFF ONLY

25

Font

Curtin Sansa Soft Pro Normal All caps, 86pt, Tracking -15

25

150 550

60

210STAFF ONLY

25 25

150550

60

Fabrication Specs

2 aluminium fabricated sign panel - cut to shape. Edges to be flush with no sharp edges. Corners rounded off.

2-pack paint background to match Pantone Cool Grey 8.

Blank band to be applied with black vinyl - wrap top and bottom of sign panel. Satin clear coat applied over to encapsulate black vinyl.

Graphics / text to be matt opaque white vinyl - 3M.



Scale 1:20

Example: Solid door with latch lock


Scale 1:20

Example: Solid door with latch lock

Butt sign to same side as door latch


410 STAIR ACCESS410AUTHORISED ACCESS ONLYAlign to top of door handle plate.

Photo ReferenceS

410OFFICE

OFFICE


If TWO door plates are required provide a 10 space. No room number required on lower panel.

ID.2.1AIDENTIFICATION - TYPE 1A (SOLID DOOR WITH LATCH)

Photo ReferenceS


Photo ReferenceS

Application to Glazing

When applied to glazing an extra layer of black vinyl is required to conceal all glue fixings from inside the room. Apply black vinyl, cut to shape, to the front of glass, with sign panel placed over (double layer).

Coordination of installation may be required with graphic film (where applicable).

410 MEETING ROOM410 MEETING ROOM410OFFICE


Scale 1:20

Example: Glazed door Layout B should be aligned to the same side as the


Scale 1:20

Example: Glazed door Layout A should be aligned to the same




410

AUTHORISED ACCESS ONLY

glass

VinylSign panel

410OFFICE

OFFICE


If TWO door plates are required provide a 10 space. No room number required on lower panel.

ID.2.1BIDENTIFICATION - TYPE 1B (GLAZED DOOR)


ID.2.2IDENTIFICATION - TYPE 2 (125 LETTERING)

Fabrication Specs

Room Number to be opaque matt white vinyl applied to outside of glazing - 3M.

Notes

Ensure correct text alignment when installing signage. Always refer to content schedule for notes, and locations plans for indicative placement. Confirm on site prior to install. 101125

Photo ReferenceS

Font

Curtin Sansa Soft Pro Normal - 470pt Tracking -15

Front Elevation

Scale 1:1


Level 2 FFL0.000 m

Level 1 FFL-0.514 m

A7302

Mezzanine Level2.900 m

Level 2 FFL0.000 m

Level 1 FFL-0.514 m

A7301


Level 2 FFL0.000 m

Level 1 FFL-0.514 m

A7301


Level 2 FFL0.000 m

Level 1 FFL-0.514 m

A7302


Level 2 FFL0.000 m

Level 1 FFL-0.514 m

10987654321 11 12

A

B

C

D

E

F

G

H

SITE CHECK TO CONFIRM

ISSUESHEET NUMBERDWG No

SHEET SIZE

DWG STAUS

CURTIN PROJECT No

SCALE:UNIT:

DRN BY

DATE

DESIGNED

CHECKED

PROJ APP

CLIENT APP

mm

CHECK SITE DIMENSIONS AND VERFIY DRAWINGS PRIOR TO

CONSTRUCTION

-

A1

ABN 46 109 290 842

L5, 56 William Street, Perth WA 6000

Telephone 08 9322 5322

www.gresleyabas.com.au

Gresley Abas Pty Ltd

C1

22.11.17

22/11/2017 1:49:06 PM

As indicated

DAP Relife

01B203-A-EL0101

BENTLEY CAMPUS

BUILDING 203EXISTING ELEVATIONS

TC

JR

AA

JR

CONSTRUCTION

CONSTRUCTION

1724

A630

STAGE 1

1 : 100A130EXISTING EAST ELEVATION1

1 : 100A130EXISTING NORTH ELEVATION2

1 : 100A130EXISTING SOUTH ELEVATION3

1 : 100A130EXISTING WEST ELEVATION4

REV DATE REVISION BYC1 22.11.17 ISSUED FOR CONSTRUCTION JR

1 : 50A130EXISTING ELEVATION 101 ENTRY5

Level 2 FFL0.000 m

Level 1 FFL-0.514 m

A7302


Level 2 FFL0.000 m

Level 1 FFL-0.514 m

A7301


Level 2 FFL0.000 m

Level 1 FFL-0.514 m

A7301


Level 2 FFL0.000 m

Level 1 FFL-0.514 m

A7302


Level 2 FFL0.000 m

Level 1 FFL-0.514 m

10987654321 11 12

A

B

C

D

E

F

G

H

SITE CHECK TO CONFIRM

ISSUESHEET NUMBERDWG No

SHEET SIZE

DWG STAUS

CURTIN PROJECT No

SCALE:UNIT:

DRN BY

DATE

DESIGNED

CHECKED

PROJ APP

CLIENT APP

mm

CHECK SITE DIMENSIONS AND VERFIY DRAWINGS PRIOR TO

CONSTRUCTION

-

A1

ABN 46 109 290 842

L5, 56 William Street, Perth WA 6000

Telephone 08 9322 5322

www.gresleyabas.com.au

Gresley Abas Pty Ltd

C1

22.11.17

22/11/2017 1:49:06 PM

As indicated

DAP Relife

01B203-A-EL0101

BENTLEY CAMPUS

BUILDING 203EXISTING ELEVATIONS

TC

JR

AA

JR

CONSTRUCTION

CONSTRUCTION

1724

A630

STAGE 1

1 : 100A130EXISTING EAST ELEVATION1

1 : 100A130EXISTING NORTH ELEVATION2

1 : 100A130EXISTING SOUTH ELEVATION3

1 : 100A130EXISTING WEST ELEVATION4

REV DATE REVISION BYC1 22.11.17 ISSUED FOR CONSTRUCTION JR

1 : 50A130EXISTING ELEVATION 101 ENTRY5

Installation Guide: Door with mid-rail

Install signage flush with mid-rail as per example

Installation Guide: Full Glazed Door

Install signage 30 above decal as per example

75

125125 30

5050

101101

ID.2.2IDENTIFICATION - TYPE 2 (125 LETTERING)


200

250

Radius 60Front Elevations

Scale 1:2

Top View

Side B

Icon is always right-reading

Side A

122 12269

Viewing distance = approx 41m

Fabrication Specs

10 acrylic fabricated sign panel. Edges to be mitred and flush with no sharp edges. Corners rounded off.

2-pack paint to match Pantone Cool Grey 8 and Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish (to edge & bracket details - both sides).

Graphics / text to be matt opaque white vinyl - 3M

Accessible blue to match Pantone 2945 with white icon / text if required

Black “L shaped” aluminium bracket fixed to wall with concealed fixings. All screws to be countersunk and colour-matched. Additional black strip required to conceal fixings on Side B. Signage fabricator to confirm fixing method, and provide shop drawings for approval.

Height above floor level to align with top of door frames.

IDC.2IDENTIFICATION - CANTILEVERED ROOM NUMBER

Photo ReferenceS

20

Font



Fabrication Specs


Raised Braille tactile membrane applied with colours to match Pantone Cool Grey 8 and to match Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish.

Accessible blue to match blue B21 ultramarine with white icon / text if required

Correct braille to be inserted in all instances.

Text to be upper and lower case and aligned left.

Colours to be prototyped and approved prior to construction. Colour to be tested under ambient light conditions on site.

Signage contractor to ensure fabrication method meets compliance with BCA and Australian Standards.

Font: Curtin Sansa Soft Pro Normal

75pt on 90pt leading, Tracking -15

Female Toilet

200

400 Layout B

Female Toilet

250

150

40

22.5

Radius 60

FW.2FACILITY - WALL MOUNTED

Photo ReferenceS

Front Elevation - Layout A

Scale 1:2


Male Toilet

Male Ambulant

UnisexShower

Unisex Toilet LH & Shower

Unisex Toilet RH & Shower

Female Ambulant

All GenderToilet LH

All GenderToilet RH

Braille Translation - Female Toilet

Braille Translation - Unisex Shower

Braille Translation - All Gender and Accessible Toilet LH and Shower

Braille Translation - All Gender and Accessible Toilet RH and Shower

Braille Translation - Female Ambulant Toilet

Braille Translation - Male Braille Translation - Male Braille Translation - All Gender and Accessible Toilet LH

Braille Translation - All Gender and Accessible Toilet RH

Female Toilet

Female Toilet

.

Layout A Layout B

Parents Room

Braille Translation - Parents Room

Examples

Scale 1:10

NOTE: Correct braille to be inserted in all instances



Installation Guide: Layout B

Scale 1:20

Installation Guide: Layout A

Scale 1:20

Installation Guide: Centre on Door

Scale 1:20

Yoka

Female Toilet

Yoka

Female Toilet

Yoka

Female Toilet

Preferred location: Position alongside door on wall next to door handle

Preferred location: Position alongside door on

wall next to door handle

Secondary location: centred on door if there is no available wall space - use Layout A


1200 AFL

50 50


FC.2FACILITY - CANTILEVERED

Installation Guide

Scale 1:X

Examples

Side A Side BSide A Side B Side A Side B Side A Side B

200 20

250

Radius 60Front Elevations

Scale 1:2

Photo ReferenceS

Side B


Side A

Fabrication Specs


2-pack paint to match Pantone Cool Grey 8 and Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish (to edge & bracket details - both sides).

Graphics / text to be matt opaque white vinyl - 3M

Accessible blue to match Pantone 2945 with white icon / text if required



Top View


ST.2.1STATUTORY - TYPE 1 (23MM)

Fabrication Specs

White Self Adhesive Vinyl applied direct to door.

FIRE SAFETY DOOR DO NOT OBSTRUCT


Layout A - left aligned

Layout B - right aligned

23

14

23

14

Front Elevation

Scale 1:2


All caps, 86pt on 106pt leading, Tracking -15


Photo ReferenceS

Photo ReferenceSAlign Left Align Right

Installation Guide: Layout B - Right aligned text

Scale 1:20

Position on both sides of a double door

Installation Guide: Layout A - Left aligned text

Scale 1:20

Position on both sides of a double door

410 STAIR ACCESS410AUTHORISED ACCESS ONLY



60


1200 AFL


Installation Guide

Scale 1:X

FIRE HOSE REELFIRE EXTINGUISHER

FIRE INDICATOR PANEL

50

28

32

50

Front Elevation

Scale 1:2 Fabrication Specs

White Vinyl applied directly to door.

Font

FIRE HOSE REEL (50 text)



Font

FIRE EXTINGUISHER (32 text)





centrecentre

1500 AFL

50

1500 AFL

50 32

Installation Guide: Application to door

Scale 1:20

Photo ReferenceS



FEC.2FIRE EXTINGUISHER - CANTILEVERED

200

250

Side B


Side A

FIREEXTINGUISHER

FIREEXTINGUISHER

140

17

17

9

Radius 60

Elevations

Scale 1:2

Photo ReferenceS

Fabrication Specs


2-pack paint to match Pantone 485 Red / ensure meets BCA requirements and Pantone Process Black C ((Dulux colour Black PG1A9) with pearl effect satin finish (to edge & bracket details - both sides).

Graphics / text to be gloss opaque white vinyl.


Above floor level height to be consistent with INT2.2 Facility Cantilevered Signs, while meeting BCA requirements.


Top View

20


FEW.2FIRE EXTINGUISHER - WALL-MOUNTED

Fabrication Specs


2-pack paint to match Pantone 485 Red / ensure meets BCA requirements and Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish.

Graphics / text to be gloss opaque white vinyl.

Concealed fixings to wall.

Above floor level height to be confirmed on site - ensure compliance with BCA requirements.

Photo ReferenceS

200

250

FIREEXTINGUISHER

140

17

17

9

Radius 60

Elevation

Scale 1:2


NOTE: Position of the curve is required to be coordinated on site as per below.

centre

Installation Guide: A - Left of door

Scale 1:20

Installation Guide: B - Right of door

Scale 1:20

Installation Guide: C - Flat on wall

Scale 1:20

FIREEXTINGUISHER

FIREEXTINGUISHER

FIREEXTINGUISHER

min 2000 above AFL to underside as per AS2444

FEW.2FIRE EXTINGUISHER - WALL-MOUNTED

Documents

DRAFT INTERNAL SIGNAGE GUIDELINES - Curtin University · signage elements. Curtin logo - Colour positive Curtin logo - Colour positive with keyline In some instances the Curtin full-colour