Embed Size (px)
Citation preview
Dr. J.T. Winowlin JappesM.E., Ph.D., (IITM)
114/1 ‘BRYLIN’ Marsden Street (Jacob Lane)
Near Scott Hr. Sec. School Nagercoil, Tamil Nadu. Mb: +91 9894921709
E-mail: [email protected],[email protected]
Educational Qualification:
PhD Studies on Electroless Ni-P and Ni-P/Diamond Composite Coatings Master of Engineering. (Production Engineering) Bachelor of Engineering. (Mechanical Engineering)
2000 - 2004 Mechanical Engg.Dept. Manufacturing Engg. Section Indian Institute of Technology Madras (IITM) Chennai, Tamilnadu, India. April 2000 Annamalai University Chidambaram Tamilnadu, India First Class with Distinction May 1997 The Indian Engineering College ManonmaniumSundaranarUniversity, Thirunelveli, Tamilnadu, India. First Class
Professional Recognition, Awards, Fellowship Received:
Young Scientist FAST TRACK award by Department of Science and Technology (DST), India
Doctoral Fellowship was given by Ministry of Human Resource and Development (MHRD), India.
Approved research guide for Anna University (No :L.No.AU/Sup/6th RB-6.182.28/AR10/ 2007) and Kalasalingam University
Guest editor for the International Journal of Computer Aided Technology. Article published about the centre in the Daily newspapers like The Hindu,
Decon Chronicle and Dinamalar for the innovative product development. Bibliography added in Marquis Who’s Who in World 2009.
Question paper setter for Annamalai University and Vinayaka Mission University
Secured Rank I in Student feedback (Many times) Life Member in Indian Society for Technical Education
Administrative Experience
Deputy Director (Academic)
Head – Centre for Composite Materials
Deputy Warden for Hostels
Member in Academic Council Meeting
Member in Academic Council Standing Committee
Member in Board of Studies (BoS)
Member in Department Research Board (DRB)
Member in NAAQ coordination Committee
ISTE Faculty Advisor
Member in University level enquiry committees
Class Committee Chairperson
Work Experience: 13 Years Teaching 9 Years Research 4 Years
Position Held Institute Period
Professor Cape Institute of Technology From 19.01.2012 onwards
Professor Kalasalingam University
October 2004 to December 2011
(as Professor from January 2008)
Senior
Lecturer
MepcoSchlenk Engineering College February 2004 to October 2004
Lecturer Indian Engineering College January 1998 to September 1998
Research Summary:
a. Funded Projects --- 3 (from DST ) & 1 Under Discussion
b. Ph.D. Guidance --- 6 Scholars
c. Research Papers --- Journal : 18 (Please Refer Publications)
Book : 1
Conferences : 52
Details of Funded Projects:
Sl.
No Title of the Project Proposal
Funding
Agency Amount
Status
1
Fabrication and analysis of Basalt
fiber based composites (as co-
investigator)
DST Rs.20, 32, 000
Completed
2
Investigation on Mechanical
Properties of Naturally woven
coir/nanoclay reinforced hybrid
composites
DST (FAST
TRACK) Rs. 14,70,000
Completed
3 For Centre for Materials Processing DST (FIST) Rs. 45,00,000 Ongoing
TOTAL (Eighty lakh and two thousand only) Rs. 80,02,000
Project under Discussion
4 Fabrication and Machining
Characteristics of Functionally
Graded Aluminum Composite
Materials.
CSIR Rs.15, 46, 000
Thesis (Ph.D / M.Tech.) Supervision:
No Name Status Title of Thesis Co-guide
(if any)
1 I.Siva completed Fabrication and Analysis of Natural Fiber
based Hybrid Composites
-Nil-
2 VinothBabu To be submit-
ting synopsis
Studies on the Thermal behavior of
Electroless Ni-P/Zirconia deposits
-Nil-
3 John Leon
Comprehensive
viva completed
Machining Studies on FGMMC -Nil-
4 Edwin
Sahaya Raj
Influence of process parameters on the
mechanical and metallurgical properties of
electroless composite coating
-Nil-
5 N.Rajini Effect of Magnetic field on the performance of
nano-particle deposits
-Nil-
6 C.Bennet Thermal Studies on Natural Fiber Composites -Nil-
7 Siva
Subramanian
2007, M.Tech Fabrication and Analysis of Natural fiber
composites
-Nil-
8 B.A.Srini
vasan
2006, M.Tech Fabrication And Characterization of
Functionally Graded Aluminium- Silicon
Carbide Composites By Centrifugal Casting
-Nil-
9 L.P.Mani
kandan
2006, M.Tech Development and characterization of
magnesium Alloys and composites
-Nil-
Conducted programs:
International Conference:
1. To be Organizing an International Conference on Advanced Materials and
Manufacturing, (ICAMM 2013) on March 22-23, 2013. Around 250 papers
from various parts of our country and foreign nationals are expected to present.
2. Co organizing chair for Thermal Energy and Environment (INCOTEE 2011),
on 24 – 26th March 2011 which sponsored by DRDO, INSA, AERB and CSIR.
Around 270 research papers from various parts of our country and foreign
nationals were presented. The outcome of the contributions turned as a special
issue in Heat Transfer Engineering (Taylor & Francis), International Journal of
Energy Technology and Policy (Inderscience Publishers)
3. Organized an International Conference in Advanced Manufacturing and
Automation (INCAMA09) on 26 – 28th March 2009 which were sponsored by
DRDO. Around 120 research papers from various parts of our country and
foreign nationals were presented. The outcome of the contributions turned as a
special issue in International Journal of Computer Aided Engineering and
Technology (IJCAET), Inderscience Publications.
National Conferences:
4. Joint Secretary for the First National Conference on Challenges and Innovative
Practices in Design, Manufacturing and Materials (NCCIPDMM 2008) on 12-13
March 2008. This was sponsored by DST.
5. Organized a National Conference on “Emerging Trends in Technology (NCET
’07)” through ISTE-Student chapter on 23rd March 2007. Around 150 research
papers covering all the Engineering disciplines were selected from all over Tamil
Nadu.
Other Symposiums / Faculty Development Program:
6. To be coordination a International level workshop on “How to complete your
PhD successfully – an international framework”, on 28.07.2012.
7. Organized a National level workshop in ‘Research Issues in Composite Materials’,
RIC M – 11 on 17.03.2012.
8. Organized a National level workshop in ‘Research Issues in Reinforced
Materials’, RIM – 11 on 27.08.11.
9. Organized a Nation Level Symposium REVELATION’ 11 through ISTE-Student
chapter on 2nd April, 2011. Around 100 research papers covering all the
Engineering disciplines were presented.
10. Organized a Nation Level Symposium INGINEA’ 10 through ISTE-Student
chapter on October, 2010. Around 140 research papers covering all the
Engineering disciplines were presented. In addition technical programs like CAD
modeling, Circuit debugging, C-coding, etc were conducted.
11. Organized a Nation Level Symposium REVELATION’ 10 through ISTE-Student
chapter on March, 2010. Around 120 research papers covering all the
Engineering disciplines were presented.
12. Organized a Nation Level Symposium on Recent Trends in Technologies (NSRTT
– 09) through ISTE-Student chapter on September, 2009. Around 150 research
papers covering all the Engineering disciplines were presented.
13. Organized a Nation Level Symposium on Recent Trends in Technologies (NSRTT
– 08) through ISTE-Student chapter on 26rd March 2008. Around 120 research
papers covering all the Engineering disciplines were presented.
14. Organized a Nation Level Symposium on Emerging Trends in Technologies
(NSET – 08) through ISTE-Student chapter on 26rd March 2008. Around 150
research papers covering all the Engineering disciplines were selected from all
over Tamil Nadu.
15. Conducted Student ISTE (TN &P) Convention. More than 300 participants were
participated
16. Conducted Faculty Development Program on MECHATRONICS in May 2004.
Guest Lectures Delivered:
1. Delivered a lecture on the topic of ‘NFC – Transfer Technologies’ for a national
Level workshop on ‘Application of Natural Fiber Composites for the
Development of Rural Societies (ANFC”12)’ in National Engineering College, on
28th of June, 2012.
2. Delivered a lecture on the topic of ‘Wear of Composite Materials’ for a SDP on
„Joining Techniques for Micro and Nano Material Fabrication‟ in PSNA College of
Engineering on 15th of May, 2012.
3. Delivered a lecture on the topic of “Small Scale Windmills” for the ten days
induction Program conducted through ‘Cape Renewable Research Centre
(CRERC)’ on 10th May, 2012.
4. Delivered a lecture on the topic of “Polymer Composite Property Analysis” for a
national Level workshop in Annamalai University on 25th of November, 2010.
5. Delivered a lecture on the topic of “Testing and Characterization” for a national
Level workshop in “Recent advances in Composite Materials” conducted by
National Engineering College, Kovilpatti – 5th Mar, 2010
6. Delivered a lecture on the topic of “Class room management” for fresh faculties
of KLU, organized by Centre for Learning Technology, Kalasalingam University,
2009
7. Delivered a guest lecture in TANCEM, Alangulam in “Productivity”, 2008
Research Publications:
a. Journal : 20
b. Book : 1
c. Conferences : 58
TOTAL : 79
Journals
1. I.Siva and J.T.Winowlin Jappes and B.Suresha(2012), Investigation on Mechanical
and Tribological behavior of Naturally Woven Coconut Sheath Reinforced Polymer Composites, International Journal of Polymer Composites (DOI 10.1002/pc.22197)
2. J.T.Winowlin Jappes and I.Siva (2012), Fractography Analysis of Naturally Woven Coconut Sheath Reinforced Polyester Composite: A Novel Reinforcement, Polymer-Plastics Technology and Engineering, 51: 419–424.
3. K.Vinoth Babu, J.T. Winowlin Jappes and T.P.D. Rajan (2012), Fabrication and
Optimization of Drilling Parameters in Heat treated SiC Reinforced Functionally Graded
Al Composites using Taguchi Method, Materials Science Forum 710 : 353-358
4. V. Manikandan, J.T. Winowlin Jappes, S.M. Suresh Kumar, P. Amuthakkannan (2011), Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites, 43 (2012) 812–818
5. J.T.Winowlin Jappes, and I.Siva, (2011) Studies on the Influence of Silane Treatment on Mechanical Properties of Coconut Sheath Reinforced Polyester Composite, Polymer-Plastics Technology and Engineering, 50(15): 1600-1605.
6. I.Siva and J.T.Winowlin Jappes, (2011) Investigation on Coir Sheath/Polyester Composites: Effect of Moisture on Wear Properties International Journal of Advanced Manufacturing Systems, 2(1): 73-82.
7. I. Siva and J. T. Winowlin Jappes (2011), Investigation on the Effect of Hybridization and weathering behavior of Natural Fiber Polymer Composites, International Journal of Computer Aided Engineering and Technology (IJCAET), 3(5/6): 559-569.
8. A. Athijayamani, M. Thiruchitrambalam, J. T. Winowlin Jappes, S. Saravanan and A.
Alavudeen (2011), Efect of Fiber Content on Mechanical Properties of Short Roselle and Sisal Fiber Hybrid Polyester Composite, International Journal of Computer Aided Engineering and Technology (IJCAET), 3(5/6): 538-546.
9. A. Alavudeen , M. Thiruchitrambalam, J. T. Winowlin Jappes, and A. Athijayamani (2011), Analysis of Mechanical Properties of Banana Fiber Polymer Composite. International Journal of Computer Aided Engineering and Technology (IJCAET), 3(5/6): 434-442.
10. J. T. Winowlin Jappes, B. Ramamoorthy and P. Kesavan Nair (2008), Novel approaches on the study of wear performance of electroless Ni–P/diamond composite deposites, Journal of Material Processing Technology, Elsevier Publications, 209, pp 1004-1010.
11. A, Alvadeen, M. Thiruchitrambalam, J. T. Winowlin Jappes, S. Ganapathy Shankar A.G. Bhagavath Singh & A. Athijeyamani (2009), Investigation on Mechanical Properties of Roselle Fiber Composites, International Journal of Material Research, Electronics and Electrical System, 2 (1-2), 53-64
12. Alavudeen, J.T. Winowlin Jappes, M. Thiruchitrambalam, P. Sivasubramanian& A. Athijeyamani (2009), Influence of Hybridization of Natural Fiber Composites on Mechanical Properties, International Journal of Material Research, Electronics and Electrical System, 2 (1-2), 85-94
13. J. T. Winowlin Jappes, B. Ramamoorthy and P. Kesavan Nair (2008), New Approaches for Electroless Deposition Process to Improve the Ni Recovery through Floatation-Adhesion Model, International Journal of Nanosystems (IJNS), 1 (1), 35-42.
14. J. T. Winowlin Jappes, A.Alavudeen, I.Siva and M.Thiruchitrambalam (2008), Fabrication and Analysis of Hybrid Composite Materials, International Journal of Nano System Technology, Electrical Engineering and Electronics, 1(1), 37-43.
15. J. T. Winowlin Jappes, B. Ramamoorthy and P. Kesavan Nair (2008), Effect of annealing on Crystallinity of electroless Ni-P deposits, Journal Manufacturing Engineering, 3 (3), 126 - 131.
16. P. Sivasubramanian, I. Siva, A. Alavudeen and J. T. Winowlin Jappes, (2007) Influence of hybridization of natural fiber composites on mechanical properties, International Journal of Plastics Technology, 11, 791 – 803.
17. P. Sivasubramanian, J. T. Winowlin Jappes and A. Alavudeen (2007), Fabrication and Analysis of Banana with Glass Fiber Composite Materials on Mechanical Properties, Journal of Manufacturing Engineering, 2 (4), pp215-220.
18. B. A. Srinivasan, T.P.D. Rajan, R.M. Pillai, B.C. Pai and J. T. Winowlin Jappes (2006), Centrifugal casting of Metal Matrix Composites, Met News, 24 (1), pp39.
19. J. T. Winowlin Jappes, B. Ramamoorthy and P. Kesavan Nair (2005), A study on the influence of process parameters on efficiency and Crystallinity of electroless Ni–P deposits,Journal of Materials Processing Technology, Vol. 169, Issue 2, PP 308-313.
20. J. T.Winowlin Jappes, Prof. B. Ramamoorthy and Prof.P.K. Nair (2004), Effect of Process Parameters on Efficiency and Performance of Electroless Nickel-phosphorous Deposits, IE (I) Journal-MM, 85 (10) PP53-58.
Book
1. Dr.J.T.Winowlin Jappes, A.Alavudeen and N.Venkatashwaran (2006), “A Text book of Engineering Materials and Metallurgy”, Laxmi Publications, ISBN:81-7008-957-3
International Conference Proceedings
1) J.T.Winowlin Jappes, N.Rajini, S.Rajakarunakaran, P.Poornanand (2012), “Electrical
Properties of Montmorillonite Nanoclay Reinforced Unsaturated Polyester
Nanocomposite” IEEE International Conference on Advances in Engineering, Science
and Management (IEEE-ICAESM 2012) Organised by EGS Pillay Engineering College,
Nagapattinam.
2) J.T.Winowlin Jappes, N.Rajini, S.Rajakarunakaran, C.Bennet (2012), “Free Vibration
of basalt fiber reinforced polymer composites, International Conference on Recent
Advances in Mechanical Engineeing “, INCRAME 2012,19 – 20 April.
3) K.Vinoth Babu, J.T. Winowlin Jappes and T.P.D. Rajan (2012), Fabrication and
Optimization of Drilling Parameters in Heat treated SiC Reinforced Functionally Graded
Al Composites using Taguchi Method, Advances in Metallic Materials and
Manufacturing Processes for Strategic Sectors, (ICAMPS 2012), January 19-21, 2012,
Trivandrum, India
4) J.T. Winowlin Jappes, I. Siva and N. Rajini (2011), Studies on the mechanical properties of naturally woven coir sheath/polyester composites, International Conference on Advancements in Polymeric Materials, CIPET-Chennai
5) J.T. Winowlin Jappes, N. Rajini and I. Siva (2011), Investigation on the effect of Nano-clay on Tensile Strength of Unsaturated Polyester Nano-Composite using Robust Design Concept, International Conference on Advancements in Polymeric Materials, CIPET-Chennai
6) P. Amuthakkannan, V. Manikandan, J.T. Winowlin Jappes and M. Uthayakumar (2011), Effect of fiber percentage and compression pressure on mechanical properties of basalt fiber reinforced polymer composites, International Conference on Advancements in Polymeric Materials, CIPET-Chennai
7) Winowlin Jappes. J.T, Siva. I, Sankarraj. S ,Vinoth. P, Sankar. K (2011), Investigation on Tensile and Impact Properties of Naturally Woven Luffa Fiber/Polyester Composite, International Conference on “Thermal Energy and Environment (INCOTEE 2011), Kalasalingam University.
8) I. Siva, J. T. Winowlin Jappes (2011), Studies on the Influence of Alkali Treatment on the Flexural Properties of Naturally Woven Coconut Sheath Reinforced Polymer Composite, International Conference on “Thermal Energy and Environment (INCOTEE 2011), Kalasalingam University.
9) Karthikeyan. G, Sornakumar. T Winowlin Jappes. JT and Siva. I (2011), Studies on the Influence of Filler Materials on the Tensile and Impact Properties of Particulate Reinforced Polymer Composite, International Conference on “Thermal Energy and Environment (INCOTEE 2011), Kalasalingam University.
10) N. Rajini, J.T. Winowlin Jappes, K. Harihara Subramanian, M.R. Muruganandhamand K.Saravanakumar, Machining Studies on Coir Sheath/Epoxy Composite Pump Impeller, International Conference on “Thermal Energy and Environment (INCOTEE 2011), Kalasalingam University.
11) K.VinothBabu, Dr. J. T.Winowlin Jappes (2010), Drilling studies on silicon carbide reinforced functionally graded aluminium matrix composites, International Conference on Recent Advances in Mechanical Engineering, ICRAME-2010, Noorul Islam University.
12) S.M.Suresh Kumar, V.Manikandan and J.T.Winowlin Jappes (2010), Taguchi based analysis on performance of natural fiber hybrid composite, International Conference on Recent Advances in Mechanical Engineering, ICRAME-2010, Noorul Islam University.
13) V.Balaguru, B.Ramesh, J.T.Winowlin Jappes and I.Siva (2010), Analysis on Mechanical Properties of Hybrid Natural Fiber Reinforced Polymer Composites, International Conference on Recent Advances in Mechanical Engineering, ICRAME-2010, Noorul Islam University.
14) Siva. I and Winowlin Jappes. J. T (2009), Effect of Hybridization in Mechanical Properties of Latifolia and Rotundus, Fibers Reinforced Polymer Composites, ICAMB-2009 VIT University, Vellore
15) M.EdwinSahayaraj and J. T. Winowlin Jappes (2009), Influence of Stabilizer Concentration on Electroless Ni-P-TiO2 Deposition, ICAMB-2009 VIT University, Vellore
16) S. John Leon and J. T. Winowlin Jappes (2009), Effect of Stabilizer on the performance of Electroless Ni-P/ZrO2 composite, ICAMB-2009 VIT University, Vellore
17) K.VinothBabu, Dr. J. T.Winowlin Jappes (2009), Drilling Studies on A356/20/SiCp Functionally Graded Composite Materials, ICAMB-2009 VIT University, Vellore
18) I.Sivaand J. T.Winowlin Jappes (2009), A study on the effect of hybridization on Mechanical properties of polymer composites reinforced With aspera and bagasses, RAMPT ’09, National Engg College, Kovilpatti, TN, India, PP 189-193
19) John Leon and J. T. Winowlin Jappes (2009), Effect of Stabilizer on the Performance of Ni-P/ZrO2 Composite Coating, INCAMA09, Kalasalingam University, pp 122
20) Bharathikkanna.U, J. T. Winowlin Jappes,I. Siva (2009), A study on the mechanical properties of particulate reinforced polymer composites, MMT09, S.V College of Engineering, TN, India, pp
21) V. Balaguru, T. Navaneethaganesh, J. T.Winowlin Jappes and I. Siva (2009), Effect Of Water Absorption On The Mechanical Properties Of Fiber Reinforced Polyester Composite, INCAMA09, Kalasalingam University, pp 122
22) I. Siva and J. T. Winowlin Jappes (2009), Investigation on the Effect of Hybridization and weathering behavior of Natural Fiber Polymer Composites, INCAMA09, Kalasalingam University, pp 123
23) M.EdwinSahayaraj and Dr. J.T. Winowlin Jappes (2009), The effect of Stabilizer concentration on Ni-P/ Ni-P-TiO2 Deposition, INCAMA09, Kalasalingam University, pp 126
24) N.Igneshwaran, B. Ramesh, J. T. Winowlin Jappes and I. Siva (2009), A Testing Of TheMechanical Properties On Particulate Reinforced Polyester Composite, INCAMA09, Kalasalingam University, pp 127
25) I.Sivaand J. T. Winowlin Jappes (2009), Effect of Moisture on Mechanical Properties of Polymer Composites Reinforced with Aspera and Bagasses, ERA 09, VelammalEngg. College, Chennai PP 590-593
26) A. Athijayamani,M. Thiruchitrambalam, J. T. Winowlin Jappes, S. Lakshmanan and A. Alavudeen (2009), Prediction of Tensile Strength of Short Roselle and Sisal Fiber Hybrid Polyester Composite using Artificial Neural Network, INCAMA09, Kalasalingam University, pp104
27) A. Athijayamani, M. Thiruchitrambalam, J. T. Winowlin Jappes, S. Saravanan and A. Alavudeen (2009), Effect of Fiber Content on Mechanical Properties of Short Roselle and Sisal Fiber Hybrid Polyester Composite, INCAMA09, Kalasalingam University, pp105
28) A. Alavudeen , M. Thiruchitrambalam, J. T. Winowlin Jappes, and A. Athijayamani (2009), Analysis of Mechanical Properties of Banana Fiber Polymer Composite, INCAMA09, Kalasalingam University, pp118
29) Bharathykannan.U, Ranjithkanna.J, Winowlin Jappes .J. T and Siva. I(2009), Effect Of Moisture Absorption On The Mechanical Properties Of Particulate Reinforced Polymer Composite, Banana Fiber Polymer Composite, INCAMA09, Kalasalingam University, pp 121
30) Bharathykannan.U, Ranjithkanna.J, WinowlinJappes .J.T and Siva (2009), A study on the mechanical properties of particulate reinforced polymer composites, MMT09, S.V College of Engineering, TN, India, Published
31) J. T. Winowlin Jappes, I.Siva and A.Alavudeen (2008), Investigation on the Effect of Hybridization on Mechanical Properties of Natural Fiber Composites, RAM 2008, V. R. Siddhartha Engineering College, Vijayawada, A.P, pp107-112.
32) J. T. Winowlin Jappes, I.Siva and A.Alavudeen (2008), Study on Mechanical Properties of Palmyra/Banyan and Glass fiber hybrid composites, International Conference on Materials for Future (ICMF – 2008), Government College of Engineering, Thrissur, Kerala, 21-25.
33) P. Siva Subramanian, J. T. Winowlin Jappes, M. Thiruchitrambalam, A. Alavudeen, A Study on the Mechanical Properties of Sisal and Glass Fiber Hybrid Composites, PTTX-PO-172, International Conference on Advances in Polymer Science and Technology, India Habitat Center, New Delhi
34) J. T. Winowlin Jappes, I.Siva and A.Alavudeen (2007),A Study on Mechanical Properties of Sisal/Straw and Glass fiber hybrid composites, International Conference on Advanced Materials and Composites (ICAMC 2007), October 24-26, National Institute for Interdisciplinary Science and Technology (NIIST), Thiruvananthapuram, Kerala, pp 1020-1024.
35) P.Sivasubramanian and J. T. Winowlin Jappes (2007), Hybridization of Glass with banana fiber composite materials on mechanical properties, International Conference on MODELING AND SIMULATION (Emerging Methods towards Frontier Technologies), Coimbatore institute of Technology, Coimbatore
36) P.Sivasubramanian and J. T. Winowlin Jappes (2007), Influence of jute with glass fibre hybrid composite materials on mechanical properties, International and INCCOM-6 Conference on Future Trends in Composite Materials and Processing, Indian Institute of Technology Kanpur, December 12-14.
37) J. T. Winowlin Jappes and A.Alavudeen (2006), Neural network based analysis of machining characteristics of Al / SiCp Composites, International Conference on advances in Materials processing and Characterization (AMPC2006), Department of Mechanical Engineering, College of Engineering, Guindy.
38) J. T. Winowlin Jappes, Saha, Dr.B.Ramamoorthy and Dr.P.Kesavan Nair (2003), “Influence of pretreatment of particles on wear behaviour of electroless Ni-B-SiC composite coating”, INCARF 2003, New Delhi.
39) J. T. Winowlin Jappes, Dr.B.Ramamoorthy and Dr.P.Kesavan Nair (2002)“Effect of parameters on crystallinity of electroless Ni-P coating”, Second International Conference on Manufacturing, ICM-2002, Dhaka, Bangladesh. pp 487.
National Conference Proceedings:
40) J.T.Winowlin Jappes, N.Rajini, S.Rajakarunakaran, C.Bennet, “Free Vibration behavior
of glass fiber reinforced polymer composite, National Conference in Recent trends in
Mechanical Engineeing “, NCRTME,11th April, 2012.
41) K.VinothBabu, Dr. J. T.Winowlin Jappes (2010), Drilling Comparison Studies on Metal Matrix and Alloys, National Conference on Advances in Design and Manufacturing, ADAM – 2010, VLB Janakiammal College of Engineering and Technology, Coimbatore
42) I. Siva, J. T. Winowlin Jappes (2009), Investigation on Mechanical Properties of Naturally Woven Fiber Composites, Emerging Trends in Composite Materials and Technology, ISAMPE, Trivandrum Chapter
43) S.M. Suresh kumar, V. Manikandan, J. T. Winowlin Jappes (2009), Investigation of Basalt fiber reinforced polymer composites, Emerging Trends in Composite Materials and Technology, ISAMPE, Trivandrum Chapter
44) Ranjithkanna.J, Bharathykannan.U, Winowlin Jappes .J. T and Siva (2009), Effect of Particulate Reinforced Composites With and Without the Moisture, RAIME09, National Engineering College, Kovilpatti, PP 23
45) J. T. Winowlin Jappes, I.Siva and A.Alavudeen (2008), Study on Mechanical Properties of Straw and Glass fiber hybrid composites, National Conference on Advances in Mechanical Engineering (NCAME 2008), Prasad V Potluri Siddhartha Institute of Technology, Kanuru, Vijayavada. (Accepted)
46) J. T. Winowlin Jappes, P.Sivasubramanian and A.Alavudeen (2007), Fabrication and property analysis of jute and glass fiber composite materials, National Conference on Emerging Trends in Materials, Manufacturing and Design, Mepco Engineering College, Sivakasi.
47) I.Siva and J. T. Winowlin Jappes (2008), A Study on the Mechanical Properties of Sisal and Glass Fiber Hybrid Composites, National Conference on Challenges and Innovative Practices in Design, Manufacturing and Materials, Kalasalingam University, Krishnankoil, 153-157,
48) Edwin Sahaya Raj and J. T. Winowlin Jappes (2008), Investigation on the Effect of Process Parameters on Deposition of Electroless Ni-P Coatings, National Conference on Challenges and Innovative Practices in Design, Manufacturing and Materials, Kalasalingam University, Krishnankoil, 183-189.
49) Leon and J. T. Winowlin Jappes (2008), Electroless Nickel Deposition – An Overview, National Conference on Challenges and Innovative Practices in Design, Manufacturing and Materials, Kalasalingam University, Krishnankoil, 190-195.
50) S.GanapathySankar, A.Alavudeen and J. T. Winowlin Jappes (2008), Natural Fiber Reinforced Polymer Matrix Composite – An Overview, National Conference on Challenges and Innovative Practices in Design, Manufacturing and Materials, Kalasalingam University, Krishnankoil, 197-199.
51) P.Sivasubramanian and J. T. Winowlin Jappes (2007), Mechanical property analysis on polymer matrix natural fibre reinforced composite materials, National Conference on Emerging Trends and Technology, A.K.College of Engg, Krishnankovil.
52) P.Sivasubramanian and J. T. Winowlin Jappes (2007), Polymer Matrix Natural Fiber Reinforced Composite Materials on Mechanical Properties, National Conference on Recent Advances in Metal-Organic Chemistry and Materials Science, PSG College of Tech, Coimbatore.
53) S.Kedharnath, R.Sadharmasadhana and J. T. Winowlin Jappes (2007), Analysis of Machining Characteristics of Al / Sicp Composites, National Conference on Emerging Trends in Technology, Kalasalingam University, Krishnankovil, 188-194.
54) P.Sivasubramanian, J. T. Winowlin Jappes and A.Alavudeen (2007), Fabrication and Analysis of Banana with Glass Fiber Composite Materials on Mechanical Properties, Sethu Institute of Technology, Madurai.
55) B.A.Srinivasan, T.P.D. Rajan, R.M. Pillai, B.C. Pai and J. T. Winowlin Jappes (2006), “Theoretical Prediction of Mechanical Properties of Aluminium Based Functionally Graded Metal Matrix Composite”, Advances in Nano, Metallic & Ceramic Composites, Indian Institute of Metals, Trivandrum Chapter.
56) L.P. Manikandan, N. Balasubramani, J. T. Winowlin Jappes, U.T.S. Pillaiand B.C. Pai (2006), Influence of SiC Particles on the Microstructure and Mechanical Properties of AZ91 Magnesium Alloy, National Conference on Mechanical Engineering Trends, NCSAME, May 4-5.
57) J. T. Winowlin Jappes, V.V.N. Reddy, Dr. B.Ramamoorthy and Dr.P.Kesavan Nair (2003),“Effect of particle size and heat treatment on wear resistance of electroless composite coated components, Proceedings of national conference on Advances in Manufacturing Technology. AMT 2003, Palakkad pp22.
58) V.V.N. Reddy, J. T. Winowlin Jappes, Dr. B.Ramamoorthy and Dr.P.Kesavan Nair (2002), “A study on the characteristics of electroless Ni-P/Diamond composite
coating”, Proceedings of 2nd National Conference on Precision Engineering, COPEN-2002, Coimbatore, pp25.
Personal Profile: Name : J.T.Winowlin Jappes
Date of Birth : 02-10-1975
Sex : Male
Marital Status : Married
Name of Spouse : N.C.Brintha, M.E., (Ph.D) (Computer Science)
Name of the Children : Brylin W Hannah
Nationality : Indian
Religion : Christian
Languages known : English(R/W/S), Tamil (R/W/S)
Permanent Address : 114/1 ‘BRYLIN’ Marsden Street (Jacob Lane) Near Scott Hr. Sec. School Nagercoil, Tamil Nadu.
Reference:
Dr.B.Ramamoorthy, Professor, Department of Mechanical Engineering, Indian
Institute of Technology Madras, Tamilnadu, India. [email protected]
Dr. T.P.D Rajan, Scientist-E, Materials and Minerals Divisions, National Institute for
Interdisciplinary Science and Technology, Trivandrum. [email protected]
Dr. L. John Berchmans, Scientist E1, Electro-Pyro Metallurgy Division,
CentralElectrochemical Research Institute, Karaikudi-630 006, Tamil
I do hereby affirm that the information and particulars furnished above are correct to the best of my knowledge and belief.
J.T Winowlin Jappes
