Upload
mohamed-hassan
View
11
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Microcontroller
Citation preview
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Features:
1. Serial communication circuit with computer using max232.
2. USB in circuit serial programming (ICSP). 3. Graphic LCD module 128x64 pixel 4. 2x16 alpha-numerical LCD 5. 4x4 key pad 6. 8 separate digital switches 7. Buzzer module 8. Two H-bridge motor drivers for two Dc
motors/ bipolar stepper motor driver 9. Uni-polar stepper motor driver. 10. Analog sensors modules ( two light
sensors and one temperature sensor Lm35DZ.
11. Two digit seven segment displays with drivers.
12. 8 LEDs. 13. USB communications with PIC 18f4550. 14. PS/2 keyboard communication. 15. Regulated power supply 16. All points are connected through fast
connectors. 17. Changeable crystal oscillator 18. All modules are upgradeable or can be
customized according to your needs. 19. Ultrasound module(optional ) 20. Infrared communication
module(optional ) 21. RTC (real time clock)module(optional ) 22. RF wireless communication
module(optional ) 23. Memory card module(optional ) 24. Triac with optotriac module(optional )
Ref : Board 1
Price: 1200 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Features:
1. USB on-board programmer (ICSP).
2. Serial communication with PC
through MAX232 driver.
3. 5 separate digital switches
4. 4x4 keypad
5. 8 LEDs.
6. Two digit seven segments with
drivers
7. Two triacs with optotriacs for loads
220VAC.
8. Two relays ( 12VDC coils, 220VAC
contacts ).
9. Two H-bridge for dc motor control.
10. Unipolar stepper motor control
11. Digital to Analog converter module.
12. Graphic LCD 128x64
13. Touch screen with its driver .
14. 2x16 alpha-neumerical LCD.
15. Temperature sensor lm35DZ
16. Two light sensors.
17. Reset circuit.
18. Removable crystal oscillator
19. Connections between PIC and
peripheral modules done through
fast connectors.
20. Buzzer module
Ref : Board 2
Price: 700 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Features:
1. USB on-board programmer
(ICSP).
2. Serial communication with PC
through MAX232 driver.
3. 5 separate digital switches
4. 4x4 keypad
5. 8 LEDs.
6. Two digit seven segments with
drivers
7. Two triacs with optotriacs for
loads 220VAC.
8. Two relays ( 12VDC coils, 220VAC
contacts ).
9. Two H-bridge for dc motor
control.
10. Unipolar stepper motor control
11. Digital to Analog converter
module.
12. Graphic LCD 128x64
13. Touch screen with its driver .
14. 2x16 alpha-neumerical LCD.
15. Temperature sensor lm35DZ
16. Two light sensors.
17. Reset circuit.
18. Removable crystal oscillator
19. Connections between PIC and
peripheral modules done through
fast connectors.
20. Buzzer module
Ref : Board 3
Price: 700LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Features:
1. 2x16 Alpha-neumerical LCD. 2. Two relays( 12vdc coil, 220VAC
contacts). 3. Serial programming with selectable
switch between run and programming modes.
4. 6 separate digital switches. 5. Reset circuit. 6. Buzzer module 7. Two light sensors. 8. Temperature sensor LM35DZ. 9. 8 LEDs 10. Unipolar stepper motor drivers for two
motors. Power supply circuit.
PICKIT 2 USB programmer:
Features:
1. In Circuit Serial Programming (ICSP).
2. Auto detection for chip on board.
3. Auto programming feature.
4. Software reset of the microcontroller on
Board.
5. Male pin header for programming
Microcontrollers on bead-board .
Working on al windows versions(Xp- vista-
seven).
Ref : Board 4
Price: 350 LE
Ref : Board 5
Price: 150 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Digital Kit (All Gates).
Features:
1. 28 digital
gates(AND,OR,NAND,NOR,XOR,XNOR,N
OT)
2. 8 different frequencies generated form
microcontroller on-board with eight
lEDs as indicators.
3. Regulated power supply.
4. 8 LEDs to b used as outputs for the
digital gates.
5. 8 digital latch switches used as inputs
for digital gates.
6. Pin header as logic 1.
7. Pin header as logic 0.
8. Points are connected through fast
connectors.
Ref : Board 6
Price: 300 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Digital Kit (NAND Gates).
Features:
1. 16 Nand gates.
2. 8 different frequencies generated form
microcontroller on-board with eight
lEDs as indicators.
3. Regulated power supply.
4. An LED is connected to the output of
each gate as indicator.
5. 8 digital latch switches used as inputs
for digital gates.
6. Pin header as logic 1.
7. Pin header as logic 0.
8. Points are connected through fast
connectors.
Ref : Board 7
Price: 300 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Digital Kit (MUX and DEMUX).
Features:
1. Multiplexer and demultiplexer circuit.
2. Regulated power supply.
3. 8 LEDs are used as inputs for MUX .
4. 8 LEDs are used as outputs for DEMUX .
5. Pin header as logic 1.
6. Pin header as logic 0.
Points are connected through fast connectors.
Ref : Board 8
Price: 300 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Digital Kit (Flip Flop).
Features:
1. flip flops and D flip-flops circuit.
2. Regulated power supply.
3. 8 different frequencies generated from
microcontroller on-board.
4. 6 digital switches.
5. Pin header as logic 1.
6. Pin header as logic 0.
Points are connected through fast connectors.
Ref : Board 9
Price: 300 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
PIC developing Board features:
1. Come with ZIF socket for easy change
PIC microcontrollers.
2. Reset circuit
3. Changeable crystal oscillator
4. Regulated power supply
5. Serial communication with PC using
MAX232 driver
6. USB communication with its power
circuit
7. PS/2 Keyboard communication
8. ICSP connector for in-circuit serial
programming
9. All point s come out with male pin
header for easy connection with other
modules through fast connectors.
GLCD 128x64 board:
1. Contains male pin header for easy
connection with microcontrollers
2. Variable resistor on board for contrast
changing.
Ref : Board 10
Price: 120 LE
Ref : Board 11
Price: 140 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Analog Sensors board contains:
1. Two light sensors using LDR with
variable resistors on board for changing
sensitivity.
2. Temperature sensor LM35DZ.
LED Board:
1. Contains 8LEDs. Each one is connected
with current limiting resistor 330R.
2. Interfaced through male pin header for
easy connection with PIC
microcontroller.
Ref : Board 12
Price: 30 LE
Ref : Board 13
Price: 10 LE
Ref : Board 13
Price: 10 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Relays Board:
1. Each board contains two relays (12vdc
coil, 220VAC contacts).
2. Each relay connected to microcontroller
through transistor with protection diode
added.
Seven segment module:
1. Module contains two digit seven
segments with drivers.
Ref : Board 14
Price: 15 LE
Ref : Board 15
Price: 20 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Alpha-numerical LCD module:
1.contains LCD 2x16 characters with variable
resistors on board for contrast changing.
Keypad module:
1. 4x4 keypad module configurable with
miKroelectronika softwares (MikroC,
MikroBasic, Mikropascal).
2. 4 pull-down resistors on board.
Ref : Board 16
Price: 50 LE
Ref : Board 17
Price: 20 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Digital switches:
1. Contains 8 digital switches. Each one
connected with pull-down resistor.
Switches are connected with male pin header.
H-bridge module:
1. L293D driver connected with male pin
header for easy interface with
microcontroller.
2. T-block connectors for easy connection
with two separate motors.
T-block for motor power supply.
Ref : Board 18
Price: 10 LE
Ref : Board 19
Price: 25 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
PICKIT2 USB programmer:
Features: 1. In Circuit Serial Programming (ICSP).
2. Auto detection for chip on board.
3. Auto programming feature.
4. Software reset of the microcontroller on
Board.
5. Male pin header for programming
Microcontrollers on bead-board .
6. Working on al windows versions(Xp- vista-
seven).
Micro-stepping stepper motor driver
2A:
1. Micro-stepping driver IC.
2. 4 modes selectable micro-stepping.
3. T-block connectors for easy motor
interface.
4. Takes steps and direction at TTL level.
5. T block for motor external motor power
supply.
Ref : Board 20
Price: 140 LE
Ref : Board 21
Price: 150 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Ultrasound Module:
1. US TX module and RX module on the
same board.
2. Used for robotic experiment and
distance measurement.
3. Easy interface with microcontroller.
4. Connector for power supply.
Ref : Board 22
Price: 200 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Robotic Developing KIT:
1. 8 relays onboard for 4 DC motors
connection (forward and reverse).
2. LCD 2x16 to display sensors reading ,
measured distance by the sensors, helps
during the design stage.
3. Contains 4 analog sensors with variable
resistors for sensor sensitivity.
4. Contains 4 digital sensors
5. Regulated power supply
6. Uni-polar stepper motor controller.
7. LED is connected to each relay as an
indicator to help in the design time.
8. ZIF socket for easy Micro changing.
9. T-blocks for easy motor connections
Power supply:
1. +12VDC
2. -12VDC
3. +5VDC
Ref : Board 23
Price: 250 LE
Ref : Board 24
Price: 10 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Physiological signal measurement
circuit (ECG , EMG):
1. This circuit is amplifier with low-pass
filter and high-pass filter.
UNIpolar stepper motor driver :
1. Based on microcontroller 2. Dip switch for auto-testing with
connection to PC.
3. Takes steps and direction from Parallel
port of the PC.
4. T-Block for easy motor connection
Ref : Board 25
Price: 500 LE
Ref : Board 26
Price: 100 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Board for two micro-stepping driver for
stepper motor:
1. 4 different modes for micro-stepping.
2. T-blocks for easy motor connections
CNC controller:
(Computer numerical control):
Features:
1. This board is to replace the PC in the
CNC applications.
2. 4 axis drivers.
3. 12 digital inputs (directions and speed
control, feed control).
4. Spindle control on/off through a relay
5. Regulated power supply
6. Alarm circuit when the machine is
finishing its job.
Ref : Board 27
Price: 300 LE
Ref : Board 28
Price: 300 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
LED matrix:
1. 8 rows and 16 columns High brightness
blue color LED.
5 phase stepper motor driver:
1. Based on microcontroller.
2. Auto test on board.
3. Ten power mosfet drivers.
Ref : Board 29
Price: 50 LE
Ref : Board 30
Price: 200 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Function generator circuit:
1. Sine wave generator.
2. Square wave generator.
3. Triangle wave generator.
4. Adjustable frequency.
Ultrasound modules (TX and RX ):
1. TX and receivers comes in two different
boards for “time of flight
“measurement.
Ref : Board 31
Price: 150 LE
Ref : Board 32
Price: 200 LE
Contact Us:
Site : www.jelecom.com
Mail : [email protected], [email protected]
Tel: 0100480101 – 0105143200
Fax: 25768668
Infra-red communication board:
1. regulated power supply
2. used for sending data from
microcontrollers.
Buzzer module:
1. Easy interface with microcontroller through
transistor.
Ref : Board 33
Price: 20 LE
Ref : Board 34
Price: 15 LE