DP-300T TRAILER SYSTEM

Model Length Width Height Weight Capacity Brakes Axles (GVW)

DP-300T 146 in. 70 in. 73 in. 2100 lb. 300 gal. electric 7000 lb.

DP-300TE 180 in. 70 in. 73 in. 2500 lb. 300 gal. Electric 7000 lb.

TE Model is an extended trailer with a utility deck and easy access gate/ramp

Trailer Pintle (military-style) hitch, 16– 6 lug wheels, heavy duty jack, lighting system, 12 volt breakaway system.

Air Compressor Jenny, 8-gallon capacity, 8 HP Honda GX engine, recoil start, 16.2 cfm @ 100 psi .

Tank 300-gallon 10- gauge steel tank w/ 24" manway. Inner lid and safety hatch. Tank dimensions: 42" dia. x 50" long.

Pumping System Versa-Matic 1-1/2" clamped metallic dual diaphragm pump operated by compressor. Variable flow control (0-70 gpm), 1-1/4" piping, material filter, “Easy Clean” surge tank.

Agitation 1-1/2" shaft diameter. Hand operated crank mixes forward or reverse with 3:1 reduction.

Hand Wand 75' hose and 6' hand wand.

Optional

Brush box Hose reel (spring loaded/self-retracting) 15' suction hose 2-5/16" ball hitch Hydraulic agitation (requires control valve and 30 gal. compressor) 30 gal. compressor

DP-300T TRAILER SYSTEM

ALSO AVAILABLE MOUNTED ON SKID

FORM SALES BROCHURE INSERT 300 Rev 1/16

ALSO AVAILABLE MOUNTED ON SKID

Model Length Width Height Weight Capacity Brakes Axles (GVW)

DP-300S 103 in. 51 in. 56 in. 1300 lbs. 300 gals. N/A N/A

COMPACT AND SMALL, BUT HAS IT ALL!The 300 Series was created as an answer for the NEW contractor to test the water without a substantial initial investment. The price tag suggests an “econo-my” class but WOW, these little giants have it all!

To achieve a low cost machine, we set out to build a small unit with an air pump and hand agitation. After selecting the best dual-diaphragm pump and air compressor, we put everything else we could fit on these babies. The result was the perfect machine for a beginner to start with, and the perfect complement to any large fleet of professional sealcoaters.

• Look familiar? We managed to fit the same manway, filter, and surge tank on these that you’ll find on our larger units. The tank may be smaller, but the guy who climbs inside to clean it sure isn’t.

• As on larger units, the 75' x 3/4" hose with 6' aluminum hand wand is used for application.• 3 to 1 gear reduction on the hand crank makes easy work of turning the 4-paddle agitator or

opt for the power agitation (as seen below) for variable speed hydraulic agitation.• The 8-gallon Jenny compressor powers the Versa-Matic, clamped metallic, dual-diaphragm

pump to provide a steady strong spray that results in professional jobs and repeat business.• The 4' extended trailer provides space to haul everything to the job site in one trip!• The skid model has a perfect deck space for a blower or crack sealer. • The skid unit can be mounted to a trailer or a truck with an 8' bed. Yes, the frame was designed

to fit between the wheel wells! **

** Most 1-ton vehicles are only rated to handle this tank when empty. Check your vehicle’s GVRW before transporting this tank on the highway with ANY sealer inside.

BELOW: DPA-300TE with steel deck and ramp/gate, hydraulic power agitation and a hose reel. RIGHT: Control Panel

P.O. BOX 279, SHIPPENSBURG, PA 17257 • PH 717-532-2439 • FAX 717-530-8158 • CUSTOMERSERVICE@NEALCOEQUIPMENT.COM