Download the Parts & Service catalogue (.pdf, 16 MB)

PARTSCATALOGUE

[email protected]

Supporting sustainable Agriculture with environmentally responsible solutions

Terms and Conditions

1. Terms are Net30 Days on approved credit2. Payment can be made by Cash, Master Card, Visa or approved Cheque3. A 2% Per Month Service Charge will be added to all past due accounts4. All goods will be invoiced at the price in effect at time of invoicing5. Pricing is subject to change without notice6. All prices shown are FOB Tillsonburg Ontario7. All parts will be shipped by common carrier or courier8. Financing is available through the FCC / AgroSpray Crop Input Program9. Any provincial or federal taxes or other charges hereafter which are imposed on the

product, delivery or sale of these products will be paid by the buyer unless proof ofexemption is supplied prior to invoicing

10. AgroSpray will not accept responsibility for damages or misuse of products purchasedfrom them. All products must be stored and used in strict accordance with federal andprovincial standards.

Claims and Shortages

Inspect shipment immediately, note any shortages and damages. Please advise AgroSpray on any discrepancies

Returned Goods Policy

1. Authorization is required prior to parts being returned2. Goods returned for credit must be freight prepaid3. Copy of Invoice must accompany returned items4. Goods must be returned within 30 days of purchase5. All returns are subject to a 20% restocking fee6. No returns allowed on special order items

INDEX

SAFETY EQUIPMENT ----------------------------------------------------------------BACKPACK SPRAYERS---------------------------------------------------------------JOHN GUEST FITTINGS -------------------------------------------------------------BLUMHARDT FITTINGS ------------------------------------------------------------TOTALLY TUBULAR TUBES--------------------------------------------------------FERTILIZER KIT PARTS--------------------------------------------------------------PRESSURE GUAGES------------------------------------------------------------------HOSE CLAMPS------------------------------------------------------------------------HOSE PRODUCTS--------------------------------------------------------------------BRASS PIPE FITTINGS---------------------------------------------------------------GARDEN HOSE ADAPTERS---------------------------------------------------------NYLON COMPRESSION FITTINGS-------------------------------------------------BANJO VALVES-----------------------------------------------------------------------BANJO 12 VOLT VALVES------------------------------------------------------------BANJO MANIFOLD VALVES--------------------------------------------------------BANJO FLOW METERS---------------------------------------------------------------BANJO MANIFOLD FITTINGS------------------------------------------------------BANJO DRYMATE COUPLERS-----------------------------------------------------BANJO IBC FITTINGS----------------------------------------------------------------BANJO TANK FLANGES-------------------------------------------------------------BANJO COUPLERS--------------------------------------------------------------------BANJO PIPE FITTINGS---------------------------------------------------------------BANJO STRAINERS-------------------------------------------------------------------HANDLER CHEMICAL INDUCTORS---------------------------------------------JOHN BLUE PRODUCTS-------------------------------------------------------------HYPRO PRODUCTS------------------------------------------------------------------TRANSFER PUMPS-------------------------------------------------------------------TEEJET PRODUCTS-------------------------------------------------------------------SNYDER TANKS-----------------------------------------------------------------------SIDESWIPE WEED WIPERS---------------------------------------------------------

page 1-11page 12-13page 14page 15-21page 22page 24-32page 33page 34-35page 36-40page 41-44page 45page 46-47page 48-58page 59-70page 71-79page 80page 81-87page 88-91page 92-93page 94-96page 97-100page 101-105page 106-110page 111-114page 115-132page 133-149page 150-152page 153-175page 176- 186page187

PriceSoft Toe From size 5 to 15 $105.99

Full Safety From size 5 to 15 $124.99

Thermo From size 6 to 15 $142.44

AgroSpray Ltd. Tillsonburg, Ontario [email protected]

1-800-640-2476

RAINSHIELD®TOUGH AND DURABLE WATERPROOF PROTECTIVE WEAR

RAINSHIELD JACKET Price

J24 280 $43.29

• Stand up collar protects back of neck• Detachable hood (separate)• Plastic snap front closure• Roomy raglan sleeves

RAINSHIELD PANT $44.64

P24 028

• Single bib design with double thick bibtop for durability• Wide adjustable elastic suspenders with nylonslides and adjustable spreader bar

RAINSHIELD HOOD $8.99

H24 501

Designed to easily fit over hard hat• Black plastic snap attachments• Detachable hood is a safety featureas it will pull off the garment shouldit become entangled while working

For Sizes 2XL, 3XL and 4XL add an upcharge of 15%


1-800-640-2476

COMMANDER™LIGHTWEIGHT WATERPROOF PROTECTIVE WEAR

COMMANDER 49” COAT Price

C20 491 $75.99

• Nylon snaps on collar fordetachable hood (separate)• Non-conductive nylon snap front• Front and Inner storm flaps• Roomy raglan sleeves

COMMANDER HOOD $10.99

H20500

• Designed to easily fit over hard hat• Drawstring• Non-conductive nylon snaps• Detachable hood is a safety featureas it will pull off the garment shouldit become entangled while working

For Sizes 2XL, 3XL and 4XL add an up charge of 15%

AgroSpray Ltd. Tillsonburg, Ontario [email protected] 3

1-800-640-2476

Magid EconoWear Lite N Kool CVZ6 Disposable Coveralls

Item #: NSCVZ6-S

Brand: Magid®

Description: White general coveralls; polypropylene material; attached elastic hood, elastic wrists and ankles; not liquid proof; meets ANSI/ISEA 101-1993 standards; sizes S-4XL.

Kimberly Clark KLEENGUARD A60 Hooded Disposable Coverall

Item #: NS45023

Brand: Kimberly-Clark®

Description: Chemical splash protection coverall; blue; zipper front with taped storm flap; seamless front; elastic back, wrists and ankles and hood; 3-layer fabric construction provides protection

against abrasions and dry particulates and liquid

Each $4.99Pkg of 5 $19.96

Each $6.99Pkg of 5 $27.96

SAFETY SUPPLIES


1-800-640-2476

Flex WF Flock Lined Nitrile Rubber Gloves

Item # NSWF5

Magid Comfort Flex 100% nitrile gloves feature high puncture resistance, an embossed grip and excellent chemical resistance. Available in 12mil, 13mil and 15mil thicknesses, these gloves are also flock-lined with reduced length cotton fibers to provide easier and more comfortable donning of the

glove. WF2, WF5 and WF8 meet FDA code of federal regulations and CFIA approval for use in food processing and handling. The gloves are 13" long and available in sizes 7-11. USDA accepted.

Magid MultiMaster NB72 12 Green Neoprene Coated Glove

Item #: NSNB72-8

Brand: Magid®

Description: Light green over dark green color; double-dipped; rough finish; cotton interlock shell; 12 length; sizes 8-10.

Each $3.99Pkg of 12 $35.99

Each $8.99

SAFETY SUPPLIES


1-800-640-2476

Magid MultiMaster Heavy Weight Black Latex Gloves with Embossed Grip

Item #: NS712

Brand: Magid®

Description: Heavy black natural latex; embossed grip finish; 14 length; 40 mil. thick; rolled edge.

Magid MultiMaster Black Neoprene Coated Liquid Proof Glove

Magid MultiMaster NB2382/NB2384 neoprene coated gloves offer a great value in coated gloves by combining superior chemical resistance with grip and flexibility at a low cost. These gloves have an

attractive shiny black color, and their premium neoprene coating is well-suited for use with oils, acids, caustics, grease, and most solvents and chemicals. The NB2382/NB2384 features a fully liquid-proof

neoprene coating with a smooth finish for the a solid grip.

Each $6.99

Each $8.99

SAFETY SUPPLIES


1-800-640-2476

Blue Disposable Powdered 5 mil Vinyl Gloves

Item #: NST5355B-S

Brand: Magid®

Description: Blue; vinyl; disposable; powdered; 5 mil. thick; 10 long; 100 gloves per dispenser; sizes S-XL

Jackson Safety MonoGoggle

Item # NSG21113R

The Jackson Safety G21113R MonoGoggle Safety Eye Protection Goggle contains a tough, light weight frame with four ventilation ports to minimize condensation. The goggles contain a soft, pliable plastic

nosepiece for a snug, comfortable seal against the user's face. Ideal for protection against chemical splashes, the Jackson ventilated glasses contain a lens made of .060" thick optical grade polycarbonate

to block out 99.9% of UV rays. A pantascope angle is utilized to improve vision.

Pkg of 100 $7.99

Each $10.95

SAFETY SUPPLIES


1-800-640-2476

Magid Particulate Respirator with Exhalation Valve

Item # NSIR1950N95

This respirator has the same features as the 7130N95, with the added benefit of a built in

exhalation valve for cooler and easier breathing. The NSIR950N95 provides protection

from solids and particulate aerosols free of oil.

CFR-1™ COMFORT FIT RESPIRATORY SYSTEM

Item # NSCFR1

North’s new CFR-1 reusable particulate respirators give workers the comfort andprotection they deserve at a much better value than ordinary dust masks. Ordinary dustmask quickly get warm, moist and

uncomfortable and are often replaced several times aday. The filter in the CFR-1 does not touch the face keeping it cool and dry, and one filtercan provide all day protectionThefacepiece is reusable, and

replaceable filters will save money and reduce waste.

Pkg of 12 $24.99

$22.95

SAFETY SUPPLIES


1-800-640-2476

42N95 REPLACEMENT FILTERS

Item # NS42N95

Agrospray offers much more safety products. If there is anything you didn’t see here that you are looking for please call and inquire.

3M Half Facepiece Disposable Respirators 5000 Series

Item #: NS3M5101-S

Brand: 3M™

Description: Half facepieces; NIOSH approved against certain organic vapors; maintenance free; low

profile design; available in small, medium and large; resealable storage bag

$36.99

Pkg of 20 $29.94

SAFETY SUPPLIES


1-800-640-2476

Organic Gas and Vapor Cartridge

Item #: NS75001

Brand: North by Honeywell

Description: Effective protection (99.97% minimum filter efficiency) from organic vapor, chlorine, hydrogen chloride, sulfur dioxide, hydrogen fuoride and chlorine dioxide; for use with North respirators

Combination Gas and Vapor Cartridge with P100 Particulate Filter

Item #: NS75SC

Description: Gas and vapor cartridge with P100 filter; for use with North 5400, 5500, 7600 and 7700 series masks; 2 per dispenser

Organic Vapor, Acid and Gas Cartridge

Model #: NS75003

Description: Protects against organic vapor, chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride and chlorine dioxide

Pkg of 2 $19.95

Pkg of 2 $19.95

Pkg of 2 $19.95

SAFETY SUPPLIES


1-800-640-2476

Silicone Full Facepiece Respirator

Item #: NS760008A

Description: Silicone full facepiece respirator; oral nasal cup; chin cup; 200 degree+ field of vision; NIOSH approved as part of a complete respirator

Silicone Half Mask Respirator

Item #: NS770030S

Description: Silicone half mask respirator; cradle suspension system; low profile; low inhalation and exhalation resistance

$287.79

$45.99

SAFETY SUPPLIES

Agrospray offers a wide range of safety equipment.Please contact us if there is something you require and is not in our catalogue.


1-800-640-2476

BACK PACK SPRAYERS

$225.99

DDiaphragm Sprayer

• 4.2 gallon capacity• 70 psi• Translucent polyethylene tank with bulit in ribs for ventillation.• Guard bar for stability and prevention of tank damage• Hook on hose guide for opposite side spraying.• 5” cap with carrying handle has built in prongs for wand storage•40” clear braided hose•heavy duty comfort grip poly flow control with lock on feature.•22” corrosion resistant poly wand•adjustable poly nozzle & flat fan nozzle•padded shoulder strap and waist strap•interchangeable pump lever for left or right hand pumping•chemical resistant viton seals•diaphragm pump can be used with liquids and soluble solutions


1-800-640-2476

BACK PACK SPRAYERS

Compression arm Sprayer• Orange handle with orange sealing cap• white polyethylene tank, UV protected• no siphon or pressure relief valve• orange base• 50 cm PVC wand• 1/4” PVC fiber reinforced hose 1.3 m long•acid spray gun with grip, filter and plastic plunger•brass adjustable nozzle with NBR gaskets•1.05 m long strap with shoulder pad•plastic flat fan spray tip with gasket

DBSM10CF – 1 gallon capacity $59.95

DBSM20CF – 2 gallon capacity $75.99


1-800-640-2476

John Guest Fittings

XXPP010822W ¼” MPT X ¼” PUSH ON

XXPP0408W ¼” PUSH ON HOSE X ¼” PUSH ON HOSE

XXPP480823W 3/8” MPT X ¼” PUSH ON HOSE

XXPP201208W 3/8” PUSH ON HOSE X ¼” PUSH ON HOSE

XXPPSV040808W ¼” PUSH ON VALVE

$2.99

$3.02

$3.59

$3.69

$19.95

Price


1-800-640-2476

A: Part #BE44507 - 1" Nut X 1" MPT Adapter

B: Part #BE 44509 - 1" Nut X 1" MSPT Adapter

C: Part #BE 44494 - 1" Nut X 3/4" MPT Adapter

D: Part #BE 44506 - 1" Nut X 1/2" MPT Adapter

E: Part #BE 44500 - 1" Nut X 7/

A: Part #BE 44496 - 1" Nut X 1/2" HB Adapter

B: Part # BE60303 - 1" Nut X 3/4" HB Adapter

C: Part # BE44497 - 1" Nut X 11/16" HB Adapter

D: Part #BE 44495 - 1" Nut X 1" HB Adapter

A: Part #BE 44499 - 1" Nut X 1/4" HB Adapter

B: Part # BE44493 - 1" Nut X 3/8" HB Adapter

$3.74

$4.03

$3.97

$3.95

$3.82

$3.70

$3.86

$3.86

$3.78

$3.56

$3.84


1-800-640-2476

BLUMHARDT FITTINGS

A: Part # BE44564 - 1" Nut X 1" MSPT-0 Elbow

B: Part #BE44565 - 1" Nut X 1" MSPT- Elbow

C: Part #BE44567 - 1" Nut X 1/2" MPT Elbow

D: Part #BE44568 - 1" Nut X 3/4" MPT Elbow

E: Part # BE61189 - 1" Nut X 1" MPT Elbow

A: Part # BE44483 - 1" Nut X Mtg. Sp. X 7/16" MSPT Adapter

B: Part #BE44484 - 1" Nut X Mtg. Sp. X 1" MPT Adapter

C: Part # BE44476 - 1" Nut X Mtg. Sp. X 1" MSPT Adapter D:

Part #BE44475 - 1" Nut X Mtg. Sp. X 3/4" MPT Adapter

A: Part # BE44477 - 1" Nut X Mtg. Sp. Coupler

B: Part # BE44491 - 1" Nut X 3 1/2" Coupler

C: Part #BE44457 - 1" Nut X 2 1/4" Coupler

$4.09

$4.09

$4.14

$4.08

$4.14

$4.03

$4.22

$4.06

$4.14

$6.21

$6.14

$5.91


1-800-640-2476

BLUMHARDT FITTINGS

A: Part # BE44480 - 1" Nut X Mtg. Sp. X 1" HB Adapter

B: Part #BE44479 - 1" Nut X Mtg. Sp. X 11/16" HB Adapter

C: Part #BE44478 - 1" Nut X Mtg. Sp. X 1/2" HB Adapter

D: Part #BE47900 - 1" Nut X Mtg. Sp. X 1/4" HB Adapter

A: Part # BE44503 - 1" Nut X 1/8" FPT Adapter

B: Part # BE44512 - 1" Nut X 1/4" FPT Adapter

C: Part # BE44508 - 1" Nut X 3/4" Female Slip Adapter (Agitator)

A: Part #BE44555 - 1" Nut X 1/2" MPT X 1" MSPT Tee

B: Part # BE44554 - 1" Nut X 3/4" MPT X 1" MSPT Tee

C: Part #BE55293 - 1" Nut X 1" MSPT X 1" Nut Tee

D: Part # BE44571 - 1" Nut w/ Orifice Sleeve

$4.16

$4.09

$4.06

$3.97

$3.88

$3.82

$3.74

$4.13

$4.17

$6.16

$3.32


1-800-640-2476

BLUMHARDT FITTINGS

A: Part # BE44557 - 1" Nut X 1" MSPT X 1" MSPT Tee

B: Part # BE44556 - 1" Nut X 1" MSPT-0 X 1" MSPT Tee

C: Part # BE44553 - 1" MSPT X 1" Nut X 1" MSPT Tee

D: Part # BE50219 - 1" Nut X MLT X 1" MSPT Tee

A: Part # BE44580 - Complete Screen Body w/ Check and 50 Mesh Screen

B: Part # BE44581 - Complete Screen Body w/ Check and 80 Mesh Screen

C: Part # BE44579 - Complete Screen Body less Check with 50 Mesh Screen

(for use in Blumhardt II Nozzle Assembly)

A: Part # BE46384 - 50 Mesh Screen

B: Part # BE46385 - 80 Mesh Screen

C: Part # BE46122 - Orifice Sleeve

D: Part # BE46128 - Screen Body Insert

$4.09

$4.08

$4.14

$4.14

$1.02

$2.00

$0.45

$0.59

$4.13

$8.30

$6.76


1-800-640-2476

BLUMHARDT FITTINGS

High Volume Metering Orifices

A: Part # BE46050 - Yellow

B: Part # BE46051 - Purple

C: Part # BE46052 - Pink

D: Part # BE46053 - Brown

A: Part # BE46336 - .060 Yellow Restrictor

B: Part #BE46131 - 3/16" Orifice Plug

C: Part # BE46132 - 1/8" Orifice Plug

Blumhardt Equipment manufactures there own line of metering orifices for use in their liquid fertilizer manifold kits. Each metering orfice features a unique "swirl" pattern which eliminates all chances of clogging of the orifice opening and the need for unnecessary and expensive monitoring systems. This gives the operator the confidence of knowing all manifold outlets are working at all times.

$0.99 each

$0.76 each


1-800-640-2476

BLUMHARDT FITTINGS

Manifold Metering Orifices

Part # BE45901 - Red

Part # BE45902 - White

Part # BE45907 - Blue

Part # BE45919 - Green

Part # BE45920 – Yellow

Manifold Metering Orifices

Part # BE45925 - Purple

Part # BE45938 - Black

Part # BE45955 - Pink

Part # BE45980 - Brown

Part # BE46002 - Orange

Part # BE46014 - Olive

$1.09 EACH

$1.09 EACH


1-800-640-2476

BLUMHARDT FITTINGS

Blumhardt Equipment manufactures there own line of hollow cone tips for use in their spray nozzle assemblies. Each cone tip features a unique "swirl" pattern which eliminates all chances of clogging of the cone tip opening and finely atomizes the spray to completely saturate the plant or weed surface for thorough coverage. This gives the operator the confidence of knowing all spray nozzles are working at all times and all areas of the plant or weed are covered.

Blumhardt Hollow Cone Spray Tips

Part # BE45680 - Red

Part # BE45681 - White

Part # BE45682 - Blue

Part # BE45683 - Green

Part #BE45684 - Yellow

Blumhardt Hollow Cone Spray Tips

Part # BE45685 - Purple

Part # BE45686 - Black

Part # BE45687 - Pink

Part # BE45688 - Brown

Part #BE45689 - Orange

Part # BE45690 - Olive

$1.25EACH

$1.25 EACH


1-800-640-2476

BLUMHARDT FITTINGS

Totally Tubular Placement Tubes

• TT-001 (JD 7000 & 7100 Series Planter & Kinze 2000 Series) $64.50 • TT-001 Oversized (JD 7000 & 7100 Series Planter & Kinze 2000 Series) $67.20• TT-002 (JD 1700, 7200, 7300 Series NON XP Planters) $64.50 • TT-002 Oversized (JD 1700, 7200, 7300 Series NON XP Planters) $67.20 • TT-006 (JD 1700 Series Planters with XP Series Row Units PATENTED) $64.50• TT-007 (John Deere MaxEmerge 5 Series) $64.50 • TT-301 (Kinze 3000 Series Planters PATENTED) $47.00 • TT-401 (Kinze 4000 Series Planter) $64.50 • TT-200 (White 8000 Series) $67.20 • TT-260_(White 6000 Series) $67.20 • TT-290 (White 9000 Series) $67.20 • TT-100 (Case International 2011 and older) $30.90 • TT-10012 (Case International 2012 and newer) $30.90 • TT-125 (Case Planters - Below the seed option) $30.90 • TT-008 (Seed Bounce Flaps All Planters) $7.50 • TT-400 (Great Plains Planter) $78.08 • TT-300 (Nitrogen/Liquid Fertilizer placement tube) $47.00


1-800-640-2476

Agrospray Offers Custom Installations


1-800-640-2476

Fertilizer Kit Parts2014-2015

SPEED UP KITS SPEED UP KITS

SPEED-UP KITS AND ACCESSORIES per unit

LFSPDUPKITJD 36 tooth to 12 tooth speed up kit 227.32$

LFSPDUPKIT5100 Case 5100 stub shaft speed up kit 429.99$

LFRS001009 1" x 9" long round shaft 27.09$

LFHS007816 7/8" x 16" long hex shaft 23.04$

LFPB00100 1" pillow block bearing 21.10$

LFSLEEVE sleeve for speed-up kit 49.19$

per unitWHEEL HUB SHAFT ADAPTOR FOR CASE 1200 LFSA001200 wheel hub shaft adapter 519.06$

#40 CHAIN per kit

LFCHAIN40KIT #40 chain kit 12.99$

chain kit includes:

4' x #40 chain

1 x connector link

1 x offset link

SPROCKETS SPROCKETS

per unit

#40 SPLIT SPROCKETS

18 tooth split sprocket 34.12$

LFSS0024 24 tooth split sprocket 38.37$








per unitSPROCKET BUSHINGS 3/4" sprocket bushing 19.00$

#40 SPROCKETS per unit

LFS1034 10 tooth 3/4" shaft #40 sprocket 6.14$

LFS121 12 tooth 1" shaft #40 sprocket 7.35$

WELD-A-SPROCKETS WITHOUT HUBS per unit

LFWS0018 18 tooth weld a sprocket 6.77$











WELD-A-HUB per unit

LFWH0034 3/4" round weld a hub 9.71$

LFWH0078 7/8" round weld a hub 9.71$

LFWH00100 1" round weld a hub 9.71$

LFWH00114 1 1/4" round weld a hub 9.71$

LFWH0034H 3/4" hex weld a hub 29.19$

LFWH0034HSH 3/4" hex weld a hub w/shear bolt hole 30.66$

LFWH0078H 7/8" hex weld a hub 29.19$

LFWH00100H 1" hex weld a hub 29.19$

LFSS0018

LFSB0034


1-800-640-2476


TUBES TUBES

DRILL TUBES per unit

LFDT0001 JD 8300/450/455 tube w. self-tapping screws and orange cap 18.74$

LFDT0002 JD 750 SS brakeline tube with orange cap 36.54$

LFDT0003 JD 750 2 piece drill tube with orange cap 26.61$

LFDT0004 JD 1560/1590 10" drill tube w. 1/4" compression fitting 38.74$

LFDT0005 JD 1590 9" drill tube with 1/4" compression fitting 38.74$

LFDT0006 JD 750 12" drill tube w. 1/4" compression fitting 38.74$

LFDT0007 JD 750 10" drill tube w. 1/4" compression fitting 38.74$

LFDT0008 IH5100/IH5300 tube with orange cap 16.01$

LFDT0009 IH 5400/IH 5500 tube with orange cap 16.01$

LFDT0010 IH 5400 heavy w. 1/4" compression fitting 29.61$


1-800-640-2476


TUBES TUBES

DRILL TUBES

per unit

LFDT0011 Tye series 1-5 double spring tube with orange cap 18.74$

LFDT0012 Tye single spring tube with orange cap 18.74$

LFDT0013 Tye 2015 tube with orange cap 18.74$

LFDT0014 Flexicoil tube with orange cap 16.01$

LFDT0015 Great Plains-seedlock drill tube with orange cap 23.25$

LFDT0016 Great Plains-no seedlock tube with orange cap 16.01$

LFDT0017 United Farm Tool tube with orange cap 15.59$

LFDT0018 Marliss & IH 10 & 510 tube with orange cap 16.64$

LFDT0019 Universal tube - thin wall with orange cap 5.77$

LFDT0020 Universal tube - thick wall w. 1/4" compression fitting 10.86$

LFDT0021 Krause tube with orange cap 18.74$

LFDT0022 Sunflower tube with orange cap 18.74$

LFDT0023 Single Shoot Barton tube with orange cap 15.06$

LFDT0024 Case T500/New Holland Air Seeder tube with orange cap 19.68$


1-800-640-2476


TUBES TUBES

PLANTER TUBES per unit

LFPT0001 JD7000, JD7100 tube with orange cap 17.90$

LFPT0002 JD7000, JD7100 dog tube with brakeline 39.63$

LFPT0003 JD MaxiMerge tube with orange cap 16.64$

LFPT0004 JD XP tube with orange cap 16.64$

LFPT0005 White tube with orange cap 19.32$

LFPT0006 IH 800/900/950/955/6200 Early Air Riser tube with orange cap 17.32$

LFPT0007 IH 800, IH 900 plate tube with orange cap 19.32$

LFPT0008 Case Air Seeder Tube with orange cap 19.95$


1-800-640-2476

Fertilizer Kit Parts 2014-2015

TUBES TUBES

PLANTER TUBES per unit

LFPT0009 CASE 1250 tube, small tab with orange cap 17.90$

LFPT0010 CASE 1250 tube, big tab with orange cap 17.90$

LFPT0011 Deutz Allis air tube with orange cap 14.22$

LFPT0012 Allis Chalmers air champ tube with orange cap 12.75$

MISCELLANEOUS per unit

LFPT0013 S tine scuffler tube with orange cap 17.58$

XXKONTUBE Fumigant tube 46.30$

KEETON SEED FIRMER

PLANTER: per unit

PP100P202X Universal dual tube Keeton Seed Firmer 48.00$

PP100P202K Kinze dual tube Keeton Seed Firmer 48.00$

PP100P202 Dual Tube Keeton Seed Firmer tail only 46.00$


1-800-640-2476


HARDWARE HARDWARE

Pump Mount Brackets

PUMP MOUNTING BRACKETS (with backing plate) per unit

LFPM0001 pump mount - straight 58.80$

LFPM0002 pump mount - offset 93.45$

LFPM0003 pump mount - reverse 87.150$

LFPM0004 pump mount - JD 1760 108.15$

LFHS007816, 7/8" x 16" hex shaft is required

LFPM0005 pump mount - L shape 45.15$

LFPM0006 pump mount - JD 750/1560/1590 116.55$

LFPM0007 pump mount - extended reverse 100.80$

LFPM0008 pump mount - JD1890/1990 side 123.90$

LFPM0009 pump mount - JD1890/1990 long side 134.40$

LFPM0010 pump mount - JD 450 100.80$

LFPM0011 pump mount - offset extended 97.65$

LFPM0012 pump mount - JD1770 NT 118.65$

LFHS007816, 7/8" x 16" hex shaft is required

LFPM0013 pump mount - Case 1250 49.35$

LFPM0014 pump mount - JD 1790 NT CCS 118.65$


1-800-640-2476


HARDWARE HARDWARE

Tank Mounting Brackets

FRONT MOUNT BRACKETS (fits all 5" x 7" & 7" x 7") SOLD AS SETS per unit

LFTM0001 55 & 85 gallon front mount bracket 412.65$

LFTM0002 110 gallon front mount bracket 412.65$

LFTM0003 150 & 200 gallon front mount bracket 412.65$

ABOVE BEAM MOUNTS (various beam sizes available) SOLD AS SETS per unit

LFTM0004 ABM -3" x 7", 10" AB, straight, no flat bar 506.10$

LFTM0005 ABM- 4" x 6", 10" AB, straight, no flat bar 506.10$

LFTM0006 ABM- 5" x 7", 13" AB, offset flush, with flat bar 506.10$

LFTM0007 ABM- 7" x 7", 12" AB, straight, with flat bar 506.10$

LFTM0008 ABM- 7" x 7", 13" AB, offset, with flat bar 506.10$

LFTM0009 ABM- 7" x 7",16" AB, straight, no flat bar 506.10$

LFTM0010 ABM- 7" x 7", 16" AB, offset, with flat bar 506.10$

LFTM0011 ABM- 7" x 7", 17" AB, offset flush, with flat bar 506.10$

LFTM0012 ABM- 7" x 9", 15" AB, straight, heavy 983.85$

LFTM0013 ABM- 8" x 8", 16" AB, straight, no flat bar 506.10$

LFTM0014 ABM- 8" x 8", 16" AB, straight, with flat bar 506.10$

LFTM0015 ABM- 8" x 12", 13" AB, straight, heavy 950.25$

LFTM0016 ABM- 10" x 10", 17.5" AB, straight, no flat bar 506.10$


1-800-640-2476


HARDWARE HARDWARE

Tank Mounting Brackets

DRILL BRACKET MOUNTS per unit

LFTM0048 JD 750/1560/1590 no-till tank mount bracket 640.50$

LFTM0017 JD 750/1560/1590 20' no-till tank mount bracket 531.30$

LFTM0018 Krause tank mount bracket 495.60$

LFTM0019 IH 5100/5300 tongue tank mount bracket 452.55$

LFTM0020 Sunflower cart tank mount bracket 449.50$

LFTM0021 Sunflower tank mount bracket for 25' and 30' models 449.50$

LFTM0022 IH/White front beam tank mount bracket 537.60$

LFTM0023 Salford 5 piece tank mount bracket 786.45$

LFTM0024 Salford 3 piece tank mount bracket 702.45$

LFTM0025 Great Plains tounge tank mount bracket 495.60$

LFTM0026 JD 1890/1990 CCS tank mount brackets, 48" long for 30' model 648.90$

LFTM0027 JD 1890/1990 CCS tank mount brackets, 54" long for 40' model 648.90$

LFTM0028 JD 1890/1990 CCS manifold mount clip 22.05$

LFTM0029 Landoll 15' and 20' bracket 648.90$

LFTM0030 Landoll 30' bracket 648.90$

LFTM0031 Case T500/New Holland bracket 449.40$

LFTM0032 Case T500/New Holland bracket for cart model 943.95$

PLANTER BRACKET MOUNTS per unit

LFTM0033 JD 1770 Conservation till bracket 555.45$

LFTM0034 7" x 7" universal - adjustable 525.00$

LFTM0035 White 6300 above beam tank mount brackets - 7x7 beam 374.85$

LFTM0036 above beam brackets - 5x7 beam 449.40$

LFTM0037 White 6222 / 6232 tank mount - 7x7 beam 474.60$

LFTM0038 Bluejet 20" flatbar with 12" rod tank mount bracket 69.30$

LFTM0039 Tye 5"x2" flat plate with 7" bolts 76.65$

LFTM0040 Case 1200/1240 tank mount bracket for CCS 891.45$

LFTM0041 Case 1200/1240 tank mount bracket for CCS with interplants 891.45$

LFTM0042 White 8500 front tank mount bracket-4" double beam 454.65$

LFTM0043 White front mount- double beam 454.65$

LFTM0044 White 88 series plate tank mount bracket 786.45$

LFTM0045 Case 1250 post bracket for 12 row 472.50$




1-800-640-2476


HARDWARE HARDWARE

Tank Pans

TANK PANS WITH NYLON STRAPS per unit

LFPAN30 30 gallon pan, with laser bolts and straps 154.35$





LFPAN20038 200 gallon 38" D pan, with laser bolts and straps 238.35$

LFPAN20032 200 gallon 32" D pan, with laser bolts and straps 273.00$




TANK PANS WITH ANGLE ATTACHED INCLUDING NYLON STRAPS per unit

LFPAN55A 55 gallon pan with angles with laser bolts and straps 367.00$




LFPAN20038A 200 gallon 38" D pan with angles with laser bolts and straps 459.90$

LFPAN20032A 200 gallon 32" D pan with angles with laser bolts and straps 521.85$



LFPAN500A 500 gallon pan with angles with laser bolts and straps $ 11123.50LFPAN200EA 200 gallon elliptical pan with angles with laser bolts and straps 787.50$

LFPAN300EA 300 gallon elliptical pan with angles with laser bolts and straps $ 1058.85LFPAN500EA 500 gallon elliptical pan with angles with laser bolts and straps $ 1181.25LFPAN750EA 750 gallon elliptical pan with angles with laser bolts and straps $ 1435.35LFPAN1000EA 1000 gallon elliptical pan with angles with laser bolts and straps $ 1435.35

TANK STRAPS per unit

LFBOLT laser bolt 12.75$

LFSTRAP nylon strap 5.69$


1-800-640-2476

4" PRESSURE GUAGES

Liquid Filled•General Purpose - not for use with oxygen•Application: Where vibration or pressure pulsation occur•#304 Stainless Steel Case•Accuracy: 1.5% full Scale Value•Operating Temperatures: Ambient: -4°F to 140°F(-20°C to 60°C)•Bourdon Tube

Part# Pressue Range Price

XXGUAGE30 0-30 PSI $54.99XXGUAGE60 0-60 PSI $54.99XXGUAGE100 0-100PSI $54.99XXGUAGE160 0-160PSI $54.99XXGUAGE300 0-300PSI $54.99

2.5" PRESSURE GUAGES

Features• Glycerin liquid absorbs shock assures sensitive, accurate reading• 2-1/2” face with stainless steel case• Bottom connection 1/4” NPT

Part# Pressure Range Price

DB030LF 0-30PSI $17.99DB060LF 0-60PSI $17.99DB0100LF 0-100PSI $17.99DB0160LF 0-160PSI $17.99DB0300LF 0-300PSI $17.99DB0600LF 0-600PSI $17.99DB01000LF 0-1000PSI $17.99DB01500LF 0-1500PSI $17.99DB02000LF 0-2000PSI $17.99DB03000LF 0-3000PSI $17.99

ALL STAINLESS PRESSURE GUAGES AVAILABLE UPON REQUEST


1-800-640-2476

http://www.google.ca/imgres?imgurl=https://s3.amazonaws.com/nriparts/284201-2.jpg&imgrefurl=https://www.nriparts.com/miscellaneous/miscellaneous/bii/4in-dial-face-glycerine-filled-pressure-gauge-0-2000kpa-0-300psi-14in-npt/&h=853&w=1280&tbnid=XiO7iM8q2PzzfM:&zoom=1&docid=Vuun5LxUCLlE4M&itg=1&ei=hvZYVKHiNYKgyATchYDADw&tbm=isch&ved=0CCYQMygJMAk&iact=rc&uact=3&dur=12549&page=1&start=0&ndsp=38

HAS GEAR CLAMPS5/16" HEX slotted 305 S.S screw1/2" S.S band

Part# STD Pkg Min Max Price

BUHAS6 10 5/16" 7/8" $1.08BUHAS8 10 7/16" 1" $1.16BUHAS10 10 9/16" 1-1/16" $1.22BUHAS12 10 9/16" 1-1/4" $1.22BUHAS16 10 11/16" 1-1/2" $1.28BUHAS20 10 3/4" 1-3/4" $1.28BUHAS24 10 1-1/16" 2" $1.28BUHAS28 10 1-5/16" 2-1/4" $1.28BUHAS32 10 1-9/16" 2-1/2" $1.36BUHAS36 10 1-13/16" 2-3/4" $1.36BUHAS52 10 1-13/16" 3-3/4" $1.69BUHAS64 10 2-1/2" 4-1/2" $1.99BUHAS72 10 3" 5" $1.99BUHAS96 10 4-1/2" 6-1/2" $2.49BUHAS128 1 6-1/2" 8-1/2" $3.39

MAH GEAR CLAMPS

Part# Std Pkg Min Max Price

BUMAH4 10 7/32" 5/8" $1.09BUMAH6 10 5/16" 7/8" $1.09

Full pkg orders recieve an additional 10% off


1-800-640-2476

M8 MAXI CLAMP STAINLESS

Part# Min Max weight Price

BUBOLT32 32-35mm 1.26" 1.41" 0.22 $6.29BUBOLT36 36-39mm 1.42" 1.56" 0.22 $6.29BUBOLT40 40-43mm 1.57" 1.72" 0.23 $6.29BUBOLT44 44-47mm 1.73" 1.88" 0.24 $8.38BUBOLT48 48-51mm 1.89" 2.04" 0.25 $8.58BUBOLT52 52-55mm 2.05" 2.17" 0.25 $9.28BUBOLT56 56-59mm 2.20" 2.35" 0.26 $9.67BUBOLT60 60-63mm 2.36" 2.51" 0.27 $9.36BUBOLT68 68-73mm 2.68" 2.90" 0.30 $12.34BUBOLT64 64-67mm 2.52" 2.67" 0.28 $10.59BUBOLT74 74-79mm 2.91" 3.14" 0.31 $12.82BUBOLT80 80-85mm 3.15" 3.38" 0.31 $12.91BUBOLT86 86-91mm 3.39" 3.61" 0.32 $12.99BUBOLT92 92-97mm 3.62" 3.85" 0.33 $13.69BUBOLT98 98-103mm 3.86" 4.08" 0.33 $13.92BUBOLT113 113-121mm 4.45" 4.79" 0.36 $14.19BUBOLT104 104-112mm 4.09" 4.44" 0.35 $13.65BUBOLT122 122-130mm 4.80" 5.15" 0.37 $15.12


1-800-640-2476

POLYETHYLENE TUBING

Application : Instrumentation tubing and transmission lines for air, liquids and gases. Cover : Low density extruded milky-white polyethylene tubing manufactured from top quality FDA approved virgin resins. Temperature : -45C to 65C(-50F to +150F)

Available Sizes

1/4"id x 3/8"od BUPET-025-038

3/8"id x 1/2"od BUPET-038-050

1/2"id x 5/8"od BUPET-050-063

CLEAR REINFORCED PVC

Application : An economical hose for handling air, water, oil, mild chemicals, and alkalis. Clear wall allows visual inspection of product. Cover : Clear smooth PVC Reinforcement : Multiple layers of synthetic yarns Tube : Clear smooth PVC Temperature : -5C to +65C(+25F to +150F)

Available Sizes

¼” BUCRPVC-025

3/8” BUCRPVC-038

½” BUCRPVC-050

5/8” BUCRPVC-063

¾” BUCRPVC-075-100

1” BUCRPVC-100

1 ¼” BUCRPVC-125

1 ½” BUCRPVC-150

2” BUCRPVC-200

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

Price

Price_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

______________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

$0.31

$0.46$0.54

$0.40$0.53

$0.73

$0.98

$1.17

$1.76

$3.17

$3.75

$7.32

Save an additional 10% on full roll quantities

HOSE PRODUCTS


1-800-640-2476

BLUE LAYFLAT

Application : A light duty layflat hose for portable pump and irrigation use.

Cover : Blue PVC impregnation. Reinforcement : Woven high tensile synthetic yarns. Tube : Blue PVC impregnation. Temperature : -10C to +55C(15F to +130F)

Available Sizes

¾” BUBLAY075

1" BUBLAY100

1-1/4" BUBLAY125

1-1/2" BUBLAY150

2” BUBLAY200

2-1/2” BUBLAY250

3” BUBLAY300

SATURN GREEN PVC WATER S&D

Application : An economical, flexible hose for construction pumps, septic tank & marine pump-out service. Resistant to some chemicals, mild acids & alkalis. Consult us for recommendations. Cover : Clear abrasion and weather resistant PVC. Reinforcement : Green PVC helix. Tube : Smooth clear PVC. Temperature : -20C to +65C(-5F to +150F)

Available Sizes

¾” BUSATG075

1” BUSATG100

11/4” BUSATG125

11/2” BUSATG150

2” BUSATG200

3” BUSATG300

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

_______________________________________________________________________________

Price

_______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

Price

$1.23

$1.21

$1.57

$0.56

$0.69

$1.13

$1.07

$1.15

$1.32

$1.63

$1.93

$2.58

$5.10


HOSE PRODUCTS


1-800-640-2476

EPDM WATER SUCTION

Application : For use in liquid waste suction application. Also for use with lliquid or dry chemcial suction applications or general industrial use where high working pressures are not required. Cover : Green polyethylene helix and Black EPDM. Reinforcement : Rigid green polyethylene helix. Tube : Smooth EPDM Temperature : -40C to +60C(-40F to +140F)

Available Sizes

1 ½” BUEPDM-150

2” BUEPDM-200

3” BUEPDM-300

4” BUEPDM-400

6” BUEPDM-600

CLEAR VINYL TUBING

Application : Handling foodstuffs, beverages and liquids where clarity and flexibility are required. Cover : Vinyl tubing is manufactured from food grade resins. It is crystal clear, non-toxic, odourless and taste free. Temperature : -5C to +65C(+25F to +150F)

Available Sizes

¼” BUCVT-025

3/8” BUCVT-038

½” BUCVT-050

5/8” BUCVT-063

¾” BUCVT-075

1” BUCVT-100

1 ¼” BUCVT-125

1-1/2” BUCVT-150

2” BUCVT-200

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

Price

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

Price

$3.42$4.20

$7.93

$15.12

$30.63

$0.25

$0.31

$0.44

$0.79

$1.17

$1.59

$1.99

$3.67

$7.01


HOSE PRODUCTS


1-800-640-2476

EPDM GENERAL PURPOSE

Application : Air, water, agricultural spray solutions, and other dilute chemicals Excellent resistance to heat and weathering Also resists animal fats, vegetable oils. Cover : Smooth red abrasion and weather resistant EPDM synthetic rubber Reinforcement : Multiple layers of synthetic yarn Tube : Synthetic oil mist resistant EPDM synthetic rubber Temperature : -30C to +93C(-20F to +200F)

Available Sizes

1/4" BUGPE-025-250

3/8” BUGPE-038-150

1/2" BUGPE-050-200

5/8 BUGPE-063-250

3/4" BUGPE-075-250

1" BUGPE-100-200

1-1/4 BUGPE-125-150

1-1/2” BUGPE-150-150

2" BUGPE-200-150

Extremely tough and kink resistant. PVC/polyurethane blended core - provides better chemical resistance than comparable all-PVC hoses. Ribbed cover provides excellent abrasion-resistance. 600 PSI working pressure. Pin-pricked cover vents vapor . . . helps prevent ballooning. SILICONE-FREE

Available Sizes

3/8” BUA1661038600

½” BUA1661050600

¾” BUA16610750600

Series A1661 600 PSI PVC/Polyurethane Blend Reinforced Spray Hose

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

Price

_____________________________________________________________________________

_____________________________________________________________________________

Price

$0.81

$1.49

$1.55

$1.99

$2.25

$2.79

$4.98

$5.99

$7.24

$2.45

$2.54

$4.60


HOSE PRODUCTS


1-800-640-2476

Poly Tubing ¼”

Available Colours

Yellow IRP22310440X1K

Green IRP22370440X1K

Red IRP22340440X1K

Blue IRP22360440X1K

Features • Economical and lightweight• LLDPE resin provides excellent environmental stress crack resistance• Resistant to sunlight and other forms of ultra-violet radiation• Chemically inert• Excellent resistance to solvents

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

Price

$0.25

$0.25

$0.25

$0.25

Save an additional 10% of full roll quantities

HOSE PRODUCTS


1-800-640-2476

BRASS FITTINGS & COMPRESSION FITTINGS

Part No.BR108-ABR108-BBR108-CBR108-D

FPT1/81/43/81/2

Cap

Male Elbow ( 90 Deg. )Part No.XX69-3AXX69-4AXX69-4BXX69-5AXX69-5BXX69-6AXX69-6BXX69-6CXX69-8CXX69-8DXX69-10CXX69-10D

Tube x MPT3/16 x 1/81/4 x 1/81/4 x 1/45/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/2

Fittings - Pipe

Elbow ( 90 Deg. ) - FPT Both EndsPart No.BR100-A BR100-B BR100-C BR100-D

FPT1/81/43/81/2

Fittings - Compression

Tee - FPT All EndsPart No.BR101-ABR101-BBR101-CBR101-D

FPT1/81/43/81/2

FPT1/81/43/81/2

Cross - FPT All EndsPart No.BR102-ABR102-BBR102-CBRC102-D

Coupling - FPT Both EndsFPT1/8 1/43/81/2

Part No.BR103-A BR103-B BR103-C BR103-D

Fittings - Pipe

Branch Tee - FPT x FPT x MPTPart No.BR106-A BR106-B BR106-C

FPT1/81/43/8

FPT1/8 1/4

Part No.BR104-A BR104-B

Union (3 pc.) - FPT Both Ends

Elbow (45 Deg.) - FPT Both EndsFPT1/8 1/4

Part No.BR105-A BR105-B

Run Tee - FPT x MPT x FPTPart No.BR107-A BR107-B BR107-C BR107-D

FPT1/81/43/81/2

Price$1.84$1.64$1.92$3.68$2.86$2.36$2.46$2.80$4.10$4.46$5.52$9.00

Price$1.64$2.82$3.24$7.92

Price$2.00$3.02$4.46$8.18

Price$6.06$6.16$12.04$10.48

Price$0.90$1.30$2.08$3.54

Price$18.75$20.72

Price$8.72$8.80

Price$3.96$4.06$6.18

Price$1.88$3.96$3.14$5.98

Price$0.70$1.10$2.02$2.08


1-800-640-2476

BRASS FITTINGS

Square Head PlugPart No.BR109-ABR109-BBR109-CBR109-D

BushingMPT x FPT

1/4 x 1/83/8 x 1/83/8 x 1/41/2 x 1/81/2 x 1/41/2 x 3/83/4 x 3/83/4 x 1/2

Part No.BR110-BABR110-CABR110-CBBR110-DABR110-DBBR110-DCBR110-ECBR110-ED

MPT1/81/43/81/2

Lock NutPart No.BR111-ABR111-BBR111-CBR111-D

FPT1/81/43/81/2

Close NipplePart No.BR112-ABR112-BBR112-CBR112-DBR112-E

MPT1/81/43/81/23/4

Long Nipple

Fittings - Pipe Fittings - Pipe

Part No.BR113-A11/2BR113-A2BR113-A21/2BR113-A3BR113-A31/2BR113-A4

BR113-B11/2BR113-B2BR113-B21/2BR113-B3BR113-B31/2BR113-B4

BR113-C11/2B113-C2BR113-C21/2BR113-C3BR113-C31/2BR113-C4

BR113-D11/2BR113-D2BR113-D21/2BR113-D3BR113-D31/2BR113-D4

MPT x Length 1/8 x 1-1/2

1/8 x 21/8 x 2-1/2

1/8 x 31/8 x 3-1/2

1/8 x 4

1/4 x 1-1/21/4 x 2

1/4 x 2-1/21/4 x 3

1/4 x 3-1/21/4 x 4

3/8 x 1-1/23/8 x 2

3/8 x 2-1/23/8 x 3

3/8 x 3-1/23/8 x 4

1/2 x 1-1/21/2 x 2

1/2 x 2-1/21/2 x 3

1/2 x 3-1/21/2 x 4

Street Elbow 90 Deg ExtrudedPart No.BR115-ABR115-BBR115-CBR115-D

FPT X MPT1/8 X 1/81/4 X1/43/8 X 3/81/2 X 1/2

Street Elbow 90 DegPart No.BR116-ABR116-BBR116-CBR116-D

FPT X MPT1/8 X 1/81/4 X 1/43/8 X 3/81/2 X 1/2

Price$0.48$0.78$1.26$2.60

Price$0.64$1.08$1.04$1.66$1.59$2.98$2.98$2.60

Price$0.59$0.86$1.46$1.42

Price$0.44$0.68$1.02$1.44$4.40

Price$0.90$1.22$2.06$2.72$4.12$4.62

$1.34$1.84$2.42$2.68$3.04$5.28

$2.28$3.14$3.29$3.50$6.00$6.54

$2.98$3.90$3.88$5.02$5.89$6.36

Price$1.32$1.88$2.90$5.98

Price$1.68$2.38$3.44$6.70


1-800-640-2476

BRASS FITTINGS

Female Hose BarbPart No.BR126-4ABR126-4BBR126-5BBR126-6ABR126-6BBR126-6CBR126-6DBR126-8CBR126-8D

Hose I.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/2

Hose Barbs - Standard

Male Hose BarbPart No.BR125-B3ABR125-4ABR125-4BBR125-4CBR125-4DBR125-5ABR125-5BBR125-5CBR125-6ABR125-6BBR125-6CBR125-6DBR125-6EBR125-8BBR125-8CBR125-8DBR125-8EBR125-10CBR125-10DBR125-10EBR125-12DBR125-12EBR125-16EBR125-16F

Hose I.D. x MPT3/16 x 1/81/4 x 1/81/4 x 1/41/4 x 3/81/4 x 1/25/16 x 1/85/16 x 1/45/16 x 3/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/23/8 x 3/41/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/45/8 x 3/85/8 x 1/25/8 x 3/43/4 x 1/23/4 x 3/41 x 3/41 x 1

Fittings - Pipe

Hex Nipple - MPT Both endsPart No.BR122-A BR122-B BR122-C BR122-D122-BA122-CB122-DC

MPT1/81/43/81/2

1/4 x 1/83/8 x 1/41/2 x 3/8

Street Elbow ( 45 Deg. ) - ExtrudedPart No.BR124-A BR124-B BR124-C BR124-D

FPT x MPT1/8 X 1/81/4 X 1/43/8 X 3/81/2 X 1/2

Hex Head PlugPart No.BR121-ABR121-BBR121-CBR121-D

MPT1/81/43/81/2

Part No.BR120-AABR120-BABR120-BBBR120-CBBR120-CCBR120-DCBR120-DD

FPT x MPT1/8 x 1/81/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Pipe AdaptorPrice$1.00$1.06$1.20$1.86$2.56$3.22$4.02

Price$0.48$0.64$1.26$1.98

Price$0.68$1.12$1.56$3.06$1.12$1.56$2.82

Price$1.32$2.40$2.94$4.48

Price$0.95$0.84$1.02$1.40$3.68$1.18$1.22$2.70$0.99$1.06$1.66$2.54$6.16$1.40$1.80$2.52$2.78$3.30$2.80$2.98$4.60$4.22$6.12$8.14

Price$1.24$1.44$2.86$2.44$1.44$2.60$3.79$2.88$3.08


1-800-640-2476

BRASS HOSE BARBS & GARDEN HOSE FITTINGS

Hose Barbs - Standard

Hose Barb Splicer - Barb Both EndsPart No.BR129-3 BR129-4 BR129-5 BR129-6 BR129-8

Hose I.D.3/161/45/16 3/81/2

Male Hose Barb Elbow ( 90 Deg. )Part No.

BR139-4A1BR39-4B BR139-6B BR139-6C BR139-8B BR139-8CBR139-10C BR139-10D

Hose I.D. x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/85/8 x 3/85/8 x 1/2

Male Hose Barb Elbow ( 45 Deg. )Part No. BR140-6A BR140-6B BR140-6C

Hose I.D. x MPT3/8 x 1/83/8 x 1/43/8 x 3/8

Fittings - Garden Hose

Standard Hose Barb Fittings

Male Hose BarbHose I.D. x MGHT

3/8 x 3/41/2 x 3/45/8 x 3/43/4 x 3/4

1 x 1

Part No.BR193-6BR193-8BR193-10BR193-12BR193-16

Male Pipe Swivel AdaptorPart No.BR194-B BR194-C

MPT x FGHT1/4 x 3/43/8 x 3/4

Female Swivel Hose BarbPart No. BR195-6 BR195-8 BR195-10 BR195-12 BR195-16

Hose I.D. x FGHT3/8 x 3/41/2 x 3/45/8 x 3/43/4 x 3/4

1 x 1

Part No.BR196-CBR196-DBR196-EBR196-FBR196-16F

MPT x MGHT3/8 x 3/41/2 x 3/43/4 x 3/41 x 3/41 x 1

Male Adaptor

Price$1.84$2.02$2.22$2.36$2.49

Price$5.44$5.12$6.88

Price$3.44$3.44$3.55$3.55$10.04

Price$6.00$6.20

Price$3.48$3.52$3.72$3.98$10.66

Price$3.58$3.48$3.48$10.70$12.12

Price$1.59$2.06$2.86$3.02$3.60$3.96$5.98$5.98

Agrospray now offers John Guest Fittings


1-800-640-2476

BRASS GARDEN HOSE FITTINGS


Male Coupling - Garden Hose Both Ends


Adaptor - Female Pipe x Male Garden HosePart No.BR197-D BR197-E

FPT x MGHT1/2 x 3/43/4 x 3/4

Adaptor - Male Pipe x Male Garden HosePart No.BR199-D BR199-E

MPT x MGHT1/2 x 3/43/4 x 3/4

Swivel Adaptor - Female Pipe x Female Garden HosePart No.BR199S-D BR199S-E

FPT x FGHT1/2 x 3/43/4 x 3/4

CapPart No.BR200-W

FGHT3/4

Standard Knurled NutPart No.BR201-W

FGHT3/4

Swivel UnionPart No.BR203-W

FGHT x FGHT3/4 x 3/4

Standard Garden Hose Washer - VinylPart No. GH

3/4

Adaptor - Female Pipe x Female Garden HosePart No.BR198-D BR198-E

FPT x FGHT1/2 x 3/43/4 x 3/4

BRGHW-12

Part No. MGHT x MGHT BR196-W 3/4 x 3/4

Price$3.96

Price$3.40$4.86

Price$3.48$6.24

Price$3.96$4.98

Price$4.36$4.92

Price$1.86

Price$1.72

Price$4.86

Price$0.20

Agrospray offers a wide selection of

Brass FittingsGalvanized Fittings

Nylon Compression FittingsGarden Hose Adapters

Brass and Stainless Steel Ball Valves

If the item you are looking for is not in our catalogue please contact us.

[email protected]


1-800-640-2476

NYLON COMPRESSION FITTINGS

Standard Ferrule NutPart No.XX361-2XX361-4XX361-5XX361-6XX361-8

Tube O.D.1/81/45/163/81/2

Part No.XX362-4 XX362-4-2 XX362-5 XX362-5-4 XX362-6XX362-6-4 XX362-8 XX362-8-6

Tube O.D.1/4

1/4 x 1/85/16

5/16 x 1/43/8

3/8 x 1/41/2

1/2 x 3/8

Standard Union - Tube Both Ends

Standard Union Tee - Tube All EndsPart No.XX364-2 XX364-4 XX364-5 XX364-6 XX364-8

Tube O.D.1/81/45/163/81/2

Part No.XX365-4 XX365-5 XX365-6 XX365-8

Tube O.D.1/45/163/81/2

Standard Union Elbow 90° - Tube Both Ends

Part No. XX366-4A XX366-4B XX366-5B XX366-6B XX366-6C XX366-6D XX366-8C XX366-8D

Tube O.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/2

Standard Female Connector - Tube x Female PipeStandard Blind Nut

Part No.XX361C-2XX361C-4XX361C-5XX361C-6XX361C-8

Tube O.D.1/81/45/163/81/2

Part No. XX368-2A XX368-4A XX368-4B XX368-4C XX368-5A XX368-5B XX368-6A XX368-6B XX368-6C XX368-6D XX368-8A XX368-8B XX368-8C XX368-8D

Standard Male Connector - Tube x Male PipeTube O.D. x MPT

1/8 x 1/81/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/81/2 x 1/41/2 x 3/81/2 x 1/2

Nylon Standard Compression FittingsNylon Standard Compression Fittings

Price$0.54$0.60$0.75$0.82$1.02

Price$0.68$0.78$0.86$0.98$1.18

Price$1.86$1.86$2.10$2.00$2.65$2.44$3.46$3.56

Price$2.84$3.26$3.60$4.48$5.42

Price$2.60$2.98$3.48$4.40

Price$1.70$1.75$1.90$2.16$2.24$2.69$1.58$1.72

Price$1.10$1.26$1.40$1.44$1.46$1.52$1.66$2.78$2.89$2.98$2.84$2.98$3.02$3.24


1-800-640-2476

NYLON COMPRESSION FITTINGS

Part No. XX369-2A XX369-4A XX369-4B XX369-4C XX369-5A XX369-5B XX369-6B XX369-6C XX369-8B XX369-8C XX369-8D

Standard Male Elbow 90° - Tube x Male PipeTube O.D. x MPT

1/8 x 1/81/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/81/2 x 1/2

Part No. XX370-2B XX370-4A XX370-4B XX370-5B XX370-6B XX370-6C XX370-8C XX370-8D

Tube O.D. x FPT1/8 x 1/41/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Standard Female Elbow 90° - Tube x Female Pipe

Part No. XX371-4A XX371-4B XX371-5B XX371-6B XX371-6C XX371-8C XX371-8D

Standard Male Run Tee - Tube x Male Pipe

Standard Male Branch Tee - Tube x Male Pipe

Tube O.D. x MPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Standard Bulkhead Union - Tube x TubePart No.XX377-4 XX377-5 XX377-6 XX377-8

Tube O.D.1/45/163/81/2

Part No. XX372-4A XX372-4B XX372-5B XX372-6B XX372-6C XX372-8C XX372-8D

Tube O.D. x MPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Part No.XX381-4XX381-5XX381-6XX381-8

Tube O.D.1/45/163/81/2

Nylon Standard Compression Fittings

Inserts - Tube

Part No.XX377LN-4 XX377LN-5 XX377LN-6 XX377LN-8XX377LN-12

Tube O.D.1/45/163/81/25/8

Standard Bulkhead Union Nut - Tube

Nylon Standard Compression Fittings

Price$1.98$1.98$2.00$2.40$2.24$2.30$2.52$2.60$2.80$3.02$3.06

Price$2.48$2.56$2.60$3.00$3.60$3.80$4.40$4.90

Price$2.64$3.26$3.68$3.92$5.02$5.10$5.14

Price$1.64$3.26$3.68$3.90$3.89$5.02$5.14

Price$2.72$2.00$3.56$4.79

Price$0.42$0.46$0.48$0.68$0.80

Price$0.24$0.28$0.32$0.44


1-800-640-2476

VALVESVALVES

POLY MICRO VALVESPART NO DESCRIPTION MAX

PSITHREAD

SIZEOPENING

THRU BALL QTY PRICE

LV025V ¼" Female NPT Micro Valve 300 ¼" 3⁄8" 1 $16.77LV038V 3⁄8" Female NPT Micro Valve 300 3⁄8" 3⁄8" 1 $16.77LV050V ½" Female NPT Micro Valve 300 ½" 15⁄32" 1 $17.87LV050SLV ½" Side Load Micro Valve 300 ½" ½" 1 $21.90

Polypropylene Micro ValvesFEATURES• 90 ° rotating handle.• Precision molded polypropylene is reinforced with fiberglass for

additional strength.• Standard FKM (viton type) seats and O-rings.• Maximum operating pressure 300 P.S.I.


PSITHREAD

SIZEOPENING

THRU BALL QTY PRICE

LV025MTV ¼" Female x Male NPT Micro Valve 300 ¼" 3⁄8" 1 $16.77LV038MTV 3⁄8" Female x Male NPT Micro Valve 300 3⁄8" 3⁄8" 1 $16.77

LV038050MTV3⁄8" Female x ½"Male NPT MicroValve 300 3⁄8"x½" 3⁄8" 1 $17.87

LV050MTV ½" Female x Male NPT Micro Valve 300 ½" 15⁄32" 1 $17.87

LV050100MTV ½" Female x 1" Male NPT Micro Valve 300 ½" 15⁄32" 1 $17.87


PSITHREAD

SIZEOPENING

THRU BALL QTY PRICE

LVHB025V ¼" Hose Barb Micro Valve 300 ¼" 3⁄8" 1 14.25

LVHB038V 3⁄8" Hose Barb Micro Valve 300 3⁄8" 3⁄8" 1 14.25

LVHB050VLVHB075V

½" Hose Barb Micro Valve 300 ½" 15⁄32" 1 12.90

¾" Hose Barb Micro Valve 300 ¾" 15⁄32" 1 12.90

LV038MTV

LV038050MTV

LV050100MTV

LVHB038050MTV

LVHB075100MTV

LVHB075MTV

LV050SLV

POLY MANIFOLD MICRO VALVESPART NO DESCRIPTION MAX

PSIFLANGE

SIZEOPENING

THRU BALL QTY PRICE

MLV100V 1" Manifold Micro Valve 300 1" ½" 1 15.18

MLV100V


1-800-640-2476

FEATURES• FKM (viton type) seals.• Precision molded polypropylene is reinforced with fiberglass for

additional strength.• Self-aligning ball moves freely against the PTFE seats for smooth

operation. The valve opens and closes with very little pressure onthe handle.

• Ball is diamond turned, after molding, to make it sphericallyperfect, which provides precise contact between ball and seats.

• PTFE self-lubricating stem bush ings and seats cannot stick or bind.• Stainless steel bolts.

Polypropylene Bolted Ball Valves

FEATURES FOR LOCKING DEVICE• 304 Stainless steel construction.• Installs under valve handle.• Comes complete with handle and locking device.• Padlock not included*

V25271V25270

VL20153

V10270V10271

4 BOLT VALVESPART NO DESCRIPTION MAX

PSIPIPESIZE

OPENINGTHRU BALL QTY PRICE

V050 ½" Full Port Valve 150V075 ¾" Full Port Valve 150V100 1" Standard Port Valve 150

½" ¾" 24/box $35.08

¾" ¾" 24/box $35.08

1" ¾" 24/box $35.08

V100FP 1" Full Port Valve 150 1" 1" 24/box $38.69

V125 1¼" Standard Port Valve 150 1¼" 1" 24/box $38.69

V125FP 1501¼" Full Port Valve 1¼" 1½" 24/box $61.43

V150 1½" Full Port Valve 150 1½" 1½" 24/box $61.43

V200 2" Standard Port Valve 150 2" 1½" 24/box $61.43

LOCKING DEVICEPART NO DESCRIPTION VALVE USED QTY PRICE

VL20153* Locking Device V125FP, V150 & V200 1 $13.37

HANDLE RISERSPART NO DESCRIPTION VALVE USED QTY PRICE

V10153138BL 1" x 13⁄8" Handle Offset V075BL & V100BL 1 $5.85

V10153138 1" x 13⁄8" Handle Offset V100FP, V125,V075SL & V100SL 1 $5.85

V20153138BL 2" x 13⁄8" Handle Offset MV200BL, V125BL & V150BL 1 $5.85

V20153138 2" x 13⁄8" Handle Offset V125FP, V150, V200V125SL, V150SL 1 $5.85

V25153138BL 2" FP x 13⁄8" Handle Offset MV220BL & MV300BL 1 $5.85

V25153138 2" FP x 13⁄8" Handle Offset V200FP & V200SL 1 $5.85

FEATURES FOR HANDLE RISERS• Allows extra clearance between handle and body for tight spaces.

VRH200K

HANDLERISER

MOUNTING BRACKETSPART NO DESCRIPTION VALVE USED QTY PRICE

V10270 Straight Mounting Bracket V100FP & V125 1 $7.91

V10271 90° Mounting Bracket V100FP & V125 1 $7.91

V25270 Straight Mounting Bracket V150 & V200 1 $13.22

V25271 90° Mounting Bracket V150 & V200 1 $15.58

FEATURES FOR MOUNTING BRACKETS• 316 Stainless steel construction.• Straight and 90° available.

REMOVABLE HANDLE KITPART NO DESCRIPTION VALVE USED QTY PRICE

VRH200K Removable Handle Kit V125FP, V150 & V200 1 $27.22

FEATURES FOR REMOVABLE HANDLE KIT• Removable handle deters opening the valve for safety, vandalism

and theft.

3 Piece Kit


1-800-640-2476

FEATURES FOR LOCKING HANDLE• Stainless steel hardware.• Locks in open and closed positions.• Locking handle replaces standard handle.**• Padlock not included.*

VL25153

Polypropylene Bolted Ball ValvesFEATURES• FKM (viton type) seals.• PTFE self-lubricating stem bush ings and seats cannot stick or bind.• Precision molded in polypropylene.• Polypropylene is reinforced with fiberglass for additional strength.• Self-aligning ball moves freely against the PTFE seats for smooth

operation.• Valve opens and closes with very little pressure on the handle.• Ball is diamond turned, after molding, to make it spherically perfect,

which provides precise contact between ball and seats.• Stainless steel bolts.

VFMT200FP(shown w/ long handle)

6 BOLT VALVESPART NO DESCRIPTION MAX

PSIPIPESIZE


V200FP 2" Full Port Valve 150 2" 2" 8/box $70.04V300 3" Standard Port Valve 100 3" 2½" 8/box $112.74V300FP 3" Full Port Valve 100 3" 3" 6/box $167.37V400 4" Standard Port Valve 75 4" 3½" 4/box $430.36

6 BOLT VALVES w/ “F” ADAPTERPART NO DESCRIPTION MAX

PSIPIPESIZE


VFMT200FP 2" Full Port Valve w/“F” Adapter 150 2" 2" 6/box $81.43VFMT200FPSH 2" Full Port Valve w/“F” Adapter 150 2" 2" 6/box $81.43

LOCKING HANDLE FEATURESPART NO DESCRIPTION VALVE USED QTY PRICE

VL25153* Locking Handle V200FP, V300, V300FP, V400VFMT200FP & VFMT200FPSH 1 $25.78

DIMENSION CHART IN INCHES (REFER TO DRAWING ON LEFT)PART NO DESCRIPTION A B C D E

V200FP Full Port Valve 3.25 2.38 5.44 9.25 5.50V300 Standard Port Valve 3.53 2.69 6.28 9.25 6.06V300FP Full Port Valve 4.25 3.25 7.35 9.25 6.40V400 Standard Port Valve 4.50 3.60 8.19 9.25 7.88VFMT200FP Full Port Valve 3.38 2.38 5.44 9.25 8.30VFMT200FPSH Full Port Valve 3.38 2.38 5.44 5.25 8.30

VRH220K

V25271V25270

FEATURES FOR REMOVABLE HANDLE KIT• Removable handle deters opening the valve for safety, vandalism

and theft.

MOUNTING BRACKETSPART NO DESCRIPTION VALVE USED QTY PRICE

V25270 Straight Mounting Bracket V200FP, V300, V300FP, V400VFMT200FP & VFMT200FPSH 1 $13.22

V25271 90° Mounting Bracket V200FP, V300, V300FP, V400VFMT200FP & VFMT200FPSH 1 $15.58

REMOVABLE HANDLE KITPART NO DESCRIPTION

VRH220K Removable Handle Kit

VALVE USED QTY PRICE V200FP, V300 & V300FP 1 $28.22

FEATURES FOR MOUNTING BRACKETS• 316 Stainless steel construction.• Straight and 90° available.

DIMENSION CHART IN INCHES (REFER TO DRAWING ON LEFT)

3 Piece Kit

**Sold separately.


1-800-640-2476

FEATURES• FKM (viton type) seals.• Stainless steel bolts.• PTFE self-lubricating stem bush ings and seats cannot stick or bind.• Precision molded in polypropylene.• Polypropylene is reinforced with fiberglass for additional strength.• Self-aligning ball moves freely against the PTFE seats for smooth operation.• Valve opens and closes with very little pressure on the handle.• Ball is diamond turned, after molding, to make it spherically

perfect, which provides precise contact between ball and seats.• Maximum operating pressure 150 P.S.I. @ 70°F & 75 P.S.I. @ 150°F.

2" Full Port Polypropylene Bolted Ball Valves

4 BOLT FULL PORT VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE

OPENING THRU BALL QTY PRICE

VFMT204FP 2" Full Port Valve Male NPT x Male Adapter 150 2" 2" 6/box $74.22

V204FP 2" Full Port Valve 150 2" 2" 8/box $66.39

FEATURES• 100% PTFE seats.• FKM (viton type) seals.• Glass-filled polypropylene.• Unique compact design.• Lightweight.• Maximum operating pressure 100 P.S.I. @ 70°F & 75 P.S.I. @ 150°F.

2" Full Port ANSI Flange Bolted Ball Valves

FULL PORT ANSI FLANGE VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


VSF200FPAF 2" Full Port Valve Male Adapter x 2" ANSI Flange 100 2" 2" 6/box $155.32

VSMT200FPAF 2" Full Port Valve Male NPT x x 2" ANSI Flange 100 2" 2" 6/box $155.32


1-800-640-2476

2" Standard Port Ball Valves “Stubby Valve”™

VSF200

VSFHB200VSFMT200

VSMT200

A

B C

PATENTED

FEATURES • Stainless steel bolts.• Glass reinforced polypropylene.• Multiple design options.• Unique patented compact design.• Lightweight.• Maximum operating pressure

100 P.S.I. @ 70°F & 75 P.S.I. @ 150°F.• All PTFE seals

2" STANDARD PORT STUBBY VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


VSF200 2" Male Adapter x 2" Female NPT 100 2"VSMT200 2" Male NPT x 2" Female NPT 100 2"VSFMT200 2" Male Adapter x 2" Male NPT 100 2"VSFHB200 2" Male Adapter x 2" Hose Barb 100 2"

1½" 24/box $54.741½" 24/box $54.741½" 24/box $58.251½" 24/box $60.97

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO DESCRIPTION A B C

VSF200 2" Male Adapter x 2" Female NPT 4.38 4.72 3.56VSMT200 2" Male NPT x 2" Female NPT 4.38 4.50 3.56VSFMT200 2" Male Adapter x 2" Male NPT 4.38 5.88 3.56VSFHB200 2" Male Adapter x 2" Hose Barb 4.38 6.90 3.56


1-800-640-2476

2" Full Port Ball Valves “Stubby Valve”

VSFMT204FP

VSF204FP

VS204FP

™PATENTEDFEATURES • Stainless steel bolts.• 100% PTFE ball seats.• Glass-filled polypropylene.• FKM (viton type) body seals.• Unique compact design.• 100 P.S.I. @ 70°F and 75 P.S.I.@ 150°F.• Lightweight.

A

B C

VSMT204FP

2" FULL PORT STUBBY VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


VSMT204FP 2" Male NPT x 2" Female NPT 100 2" 2" 18/box $66.08VSF204FP 2" Male Adapter x 2" Female NPT 100 2" 2" 18/box $66.08VS204FP 2" Female NPT x 2" Female NPT 100 2" 2" 18/box $66.08VSFMT204FP 2" Male Adapter x 2" Male NPT 100 2" 2" 18/box $66.08

VSFMT204HSFP 2" FP Male Adapter x 2" Male NPT w/ SS Ball, Stem & Handle 100 2" 2" 18/box $173.51

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO DESCRIPTION A B C

VSMT204FP 2" Male NPT x 2" Female NPT 6.38 5.72 4.25

VSMT204HSFP 2" Male Adapter x 2" Male NPT w/ SS Ball, Stem & handle 5.94 6.50 4.25

VSF204FP 2" Male Adapter x 2" Female NPT 6.38 5.91 4.25VS204FP 2" Female NPT x 2" Female NPT 6.38 5.19 4.25VSFMT204FP 2" Male Adapter x 2" Male NPT 6.38 6.50 4.25

VSFMT204HSFP


1-800-640-2476

VSFMT300VSF300

VSMT300

A

E

DC

B

3" STANDARD PORT STUBBY VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


VSMT300 3" Female NPT x 3" Male NPT 100 3"VSF300 3" Female NPT x 3" Male Adapter 100 3"VSFMT300 3" Male NPT x 3" Male Adapter 100 3"

2½" 6/box $140.69

2½" 6/box $135.10

2½" 6/box $135.10

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO DESCRIPTION A B C* D E

VSMT300 3" Female NPT x 3" Male NPT 3.63 2.84 5.25/9.25 4.60 5.09VSF300 3" Female NPT x 3" Male Adapter 3.63 2.84 5.25/9.25 4.60 5.65VSFMT300 3" Male NPT x 3" Male Adapter 3.63 2.84 5.25/9.25 4.60 7.84

3" Standard Port Ball Valves “Stubby Valve”

PATENTEDFEATURES• Stainless steel bolts.• Glass reinforced polypropylene.• FKM (viton type) body seals.• Three design options for standard and

one for full port.• Unique patented compact design.• 100 P.S.I. @ 70°F and 75 P.S.I.@ 150°F.• Lightweight.• All PTFE ball seats.

™


1-800-640-2476

3" Full Port Ball Valves “3" Stubby Valve”

PATENTEDFEATURES• Stainless steel bolts.• Glass reinforced polypropylene.• FKM (viton type) body seals.• Unique patented compact design.• 100 P.S.I. @ 70°F and 75 P.S.I.@ 150°F.• Lightweight.• All PTFE ball seats.

™

3" FULL PORT STUBBY VALVES w/SSPART NO DESCRIPTION MAX

PSIPIPE SIZE


VSFMT300HSFP 3" FP Male Adapter x 3" Male NPT w/SS ball, Stem & Handle 100 3" 3" 6/box $327.17

3" FULL PORT PORT STUBBY VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


VSFMT300FP 3" FP Male Adapter x 3" Male NPT 100 3" 3" 6/box $171.06

VSFMT300FPVSFMT300HSFP

A

E

DC

B

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO DESCRIPTION A B C* D E

VSFMT300FP 3" FP Male Adapter x 3" Male NPT 9.25 8.19 7.31 0.91 7.34

VSFMT300HSFP 3" FP Male Adapter x 3" Male NPT w/SS ball, Stem & Handle 9.88 8.19 7.31 0.88 7.31


1-800-640-2476

3-Way Poly Ball ValvesFEATURES • Stainless steel bolts.• Precision molded in polypropylene. Polypro py lene is reinforced with fiber glass for additional strength.• Self-aligning ball moves freely against the PTFE seats for smooth operation.• Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.• PTFE self-lubricating stem bushings and seats.• Maximum operating pressure 100 P.S.I.• FKM (viton type) body seals.

V075BLV100BL

V125BLV150BL

V200BL

V075SLV100SL V125SL

V150SL V200SLVT200SL

BOTTOM LOAD: Directional flow, right or left. Valve can be turned off to stop flow.

SIDE LOAD: Directional flow, right or left. Valve cannot be turned off.

3 WAY BOTTOM LOAD VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE

OPENING THRU BALL

HANDLE TYPE QTY PRICE

V075BL ¾" 3-Way Bottom Load Poly Valve 100 ¾" 1" T 18/box $50.66V100BL 1" 3-Way Bottom Load Poly Valve 100 1" 1" T 18/box $50.66V125BL 1¼" 3-Way Bottom Load Poly Valve 100 1¼" 1½" T 12/box $65.51V150BL 1½" 3-Way Bottom Load Poly Valve 100 1½" 1½" T 12/box $65.51V200BL 2" 3-Way Bottom Load Poly Valve 100 2" 2" Straight 8/box $99.98VT200BL 2" 3-Way Bottom Load Poly Valve 100 2" 2" T 8/box $99.98

3 WAY SIDE LOAD VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE

OPENING THRU BALL

HANDLE TYPE QTY PRICE

V075SL ¾" 3-Way Side Load Poly Valve 100 ¾" 1" Straight 18/box $50.66V100SL 1" 3-Way Side Load Poly Valve 100 1" 1" Straight 18/box $50.66VT100SL 1" 3-Way Side Load Poly Valve 100 1" 1" T 18/box $51.67V125SL 1¼" 3-Way Side Load Poly Valve 100 1¼" 1½" T 12/box $65.51V150SL 1½" 3-Way Side Load Poly Valve 100 1½" 1½" T 12/box $65.51V200SL 2" 3-Way Side Load Poly Valve 100 2" 2" Straight 8/box $99.98VT200SL 2" 3-Way Side Load Poly Valve 100 2" 2" T 8/box $99.98


1-800-640-2476

Polypropylene Nozzle Valves

FEATURES• Glass reinforced polypropylene.• 304 stainless steel handle, spring and pin.• FKM (viton type) rubber parts only.• Resists corrosion.• 75 P.S.I. Maximum.

1½" & 2" 2" Full Port

1" 1"

1"

FEATURES• Lightweight hose end valve for

convenient transfer of liquidsinto drums, tanks, etc.

• Angled end flange with 8" longpolypropylene fill spout.

• All stainless bolts.

Poly Dispensing Nozzle

VA200FPVA150VA200/150VA200

FEATURES• Lightweight hose end valve for

convenient transfer of liquids intodrums, tanks, etc.

• Angled end flange with 8" longpolypropylene fill spout.

• All stainless bolts. UVA100FPVA100

VN100

1½" & 2" POLY NOZZLE VALVES W/90° ELBOWPART NO DESCRIPTION MAX

PSIPIPE SIZE

OPENING THRU BALL

FEMALE NPT QTY PRICE

VA150VA200/150

1½" Nozzle Valve w/90° Elbow 150 1½"x 8" 1½" 1½" 12/box $59.87

2" x 1½" Nozzle Valve w/90° Elbow 150 1½"x 8" 1½" 2"x1½" 12/box $59.87

VA200 2" Nozzle Valve w/90° Elbow 150 2" x 8" 1½" 2" 12/box $59.87

VA200FP 2" FP Nozzle Valve w/90° Elbow 150 2" x 8" 2" 2" 6/box $89.58

1" POLY NOZZLE VALVES W/45° ELBOWPART NO DESCRIPTION MAX

PSIPIPE SIZE

OPENING THRU BALL


VA100 1" Nozzle Valve w/45° Elbow 150 1" ¾" 1" 24/box $40.97

UVA100FP 1" FP EPDM Nozzle Valve w/45° Elbow 100 1" 1" 1" 1 $35.12

1" POLY DISPENSING NOZZLE PART NO DESCRIPTION MAX

PSIPIPE SIZE

OPENING THRU BALL


VN100 1" Poly Dispensing Nozzle 75 1" N/A 1" 1 $63.87


1-800-640-2476

Single Union Polypropylene Ball ValveFEATURES• Precision molded in glass reinforced polypropylene, for strength and chemical resistance.• PTFE seats for smooth operation and proper sealing characteristics.• EPDM O-rings to handle most fertilizers and many chemicals.• Double O-rings in stem area for extra sealing protection.• Interlocking body and end plate to allow easy thread connection when installing valves.• Maximum operating pressure 100 P.S.I. at 70°F.

Single Union Polypropylene Ball ValveFEATURES• Precision molded in glass reinforced polypropylene, for strength and chemical resistance.• PTFE seats for smooth operation and proper sealing characteristics.• Double O-rings in stem area for extra sealing protection.• Interlocking body and end plate to allow easy thread connection when installing.• Maximum operating pressure 100 P.S.I. at 70°F.

SINGLE UNION POLY VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


SUV050FP ½" Full Port Union Valve 100 ½" ½" 1 $17.58SUV075FP ¾" Full Port Union Valve 100 ¾" ¾" 1 $17.58SUV100FP 1" Full Port Union Valve 100 1" 1" 1 $21.97SUV125FP 1¼" Full Port Union Valve 100SUV150FP 1½" Full Port Union Valve 100

1¼" 1¼" 1 $37.731½" 1½" 1 $37.48

SUV200FP 2" Full Port Union Valve 100 2" 2" 1 $47.58

SPINWELD POLY VALVESPART NO DESCRIPTION STEM

O-RINGMAX PSI

PIPE SIZE

OPENING THRU BALL

QTY PRICE

UV050FPUV075FP

½" Single Union Poly Valve EPDM 100 ½" ¾" 1 $17.58¾" Single Union Poly Valve EPDM 100 ¾" ¾" 1 $17.58

UV100FP 1" Single Union Poly Valve EPDM 100 1" 1" 1 $21.97UV125FPUV150FP

1¼" Single Union Poly Valve EPDM 100 1¼" 1½" 1 $37.731½" Single Union Poly Valve EPDM 100 1½" 1½" 1 $37.48

UV200FP 2" Single Union Poly Valve EPDM 100 2" 2" 1 $47.58

SPINWELD POLY VALVESPART NO DESCRIPTION STEM

O-RINGMAX PSI

PIPE SIZE


WSFMT200 2" Male Adapter x 2" Male NPT Standard Port

FKM (viton type) 150 2" 1½" 1 $55.21

WSFMT2 00FP 2" Male Adapter x 2" Male NPT Full Port

FKM (viton type) 150 2" 2" 1 $51.28

MANIFOLD SINGLE UNION POLY VALVEPART NO DESCRIPTION MAX

PSIPIPE SIZE


MSUV100FP 1" Manifold Full Port Union Valve 100 1" 1" 1 $21.97


1-800-640-2476

Electric Valves3/8" & ½" Threaded

1/3 Second Response Time3/8"-½" ON/OFF ELECTRIC VALVES

PART NO DESCRIPTION MAX PSI

PIPE SIZE


LEV038 3/8" Full Port Electric Valve 200 3/8" 1" 1 $156.17LEV050 ½" Electric Valve 200 15/32" 1" 1 $156.174

Blac

k

Red

White

White

Battery(12 VDC)

Single PoleSingle ThrowToggle Switch

FEATURES• 12 Volt DC• Stationary current draw: less than 0.04 amps.• Rotating current draw: less than 0.40 amps.• Stall current: 0.75 amps• Response time: 1/3 sec open to close• TFM seats• EPDM seals• Fiberglass reinforced polypropylene ball.• Integrated mounting slot• Standard 3 wire configuration.• Max Pressure = 200 PSI @ 70 °F.


1-800-640-2476

FEATURES

4 Second Response Time

OPEN

CLOSED

CORPOR

ATION

BANJO

OPEN

CLOSED

Regulating Wiring Diagram

On/Off Wiring Diagram

Electric Valves ¾," 1," 1¼" Threaded

¾ Second Response Time

Note: 2 wire regulating and other response times available. Contact our Sales Team for part number and availability of valves.

• 316 stainless steel ball & stem.• Stainless steel hardware.• Fiberglass reinforced polypropylene.• Glass reinforced PTFE seats.• FKM (viton type) or EPDM O-rings.• 12-volt DC operated.• 24-volt available in most models.• 150 P.S.I. maximum pressure @ 70°F.• Easily repairable.• Open/closed indicator.

¾"-1¼" ON/OFF ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EV075 ¾" Full Port Electric Valve 150 ¾" 1" 1 $410.57

EV100FP 1" Full Port Electric Valve 150 1" 1" 1 $410.57

EV125 1¼" Electric Valve 150 1¼" 1" 1 $410.57

¾"-1¼" REGULATING ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EVR075 ¾" Full Port Electric Valve 150 ¾" 1" 1 $568.42

EVR100FP 1" Full Port Electric Valve 150 1" 1" 1 $568.42EVR125 1¼" Electric Valve 150 1¼" 1" 1 $568.42


1-800-640-2476

REGULATING Electric Valves - 4 Second Response Time

ON/OFF Electric Valves - 1¼ Second Response Time

Electric Valves1½," 2" Threaded

FEATURES• 316 stainless steel ball & stem.• Stainless steel hardware.• Fiberglass reinforced polypropylene.• Glass reinforced PTFE seats.• FKM (viton type) or EPDM O-rings.• 12-volt DC operated.• 24-volt available in most models.• 150 P.S.I. maximum pressure @ 70°F.• Easily repairable.• Open/closed indicator.


OPEN

CLOSED

CORPOR

ATION

BANJO

OPEN

CLOSED



1½"-2" ON/OFF ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EV150 1½" Electric Valve 150EV200 2" Electric Valve 150

1½" 1½" 1 $599.992" 1½" 1 $599.99

1½"-2" REGULATING ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EVR150 1½" Electric Valve 150EVR200 2" Electric Valve 150

1½" 1½" 1 $715.532" 1½" 1 $715.53


1-800-640-2476

Electric Valves2" Full Port Threaded



OPEN

CLOSED

CORPOR

ATION

BANJO

OPEN

CLOSED



REGULATING Electric Valves - 4 Second Response Time

ON/OFF Electric Valves - 1¼ Second Response Time2" FULL PORT ON/OFF ELECTRIC VALVES


PIPE SIZE



2" FULL PORT REGULATING ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EVR204FP 2" Full Port Electric Valve 150 2" 2" 1 $755.64


1-800-640-2476

Electric Valves3" Full Port Threaded

FEATURES• Stainless steel hardware.• Fiberglass reinforced polypropylene.• Glass reinforced PTFE seats.• FKM (viton type) or EPDM O-rings.• 12-volt DC operated.• 100 P.S.I. maximum pressure @ 70°F.

CORPOR

ATION

BANJO

OPEN

CLOSED


ON/OFF Electric Valves - 3 Second Response Time 3 Wire3" FULL PORT ON/OFF ELECTRIC VALVES


PIPE SIZE



Note:4 wire regulating & 11 0 Volt AC, 9 Seconds response times available. Contact our sales team for part number and availability of valves.


1-800-640-2476

OPEN

CLOSED

CORPOR

ATION

BANJO

OPEN

CLOSED



Don’t forget the manifold connections for inlets

SIDE LOAD:Directional flow right or left.Valve flow cannot be turned off.

BOTTOM LOAD:Directional flow right or left.Valve flow cannot be turned off.

SIDE LOAD

BOTTOM LOAD

Attention:3-Way regulating valves are not shown, but are available. Standard 3-Way valves use the On/Off wiring diagram.

3-Way Electric Valves¾," 1," 1¼" Threaded w/Flanged Inlet

FEATURES• 316 stainless steel ball & stem.• Stainless steel hardware.• Fiberglass reinforced polypropylene.• Glass reinforced PTFE seats.• FKM (viton type) or EPDM O-rings.• 24-volt available in most models.• 12-volt DC operated.• 150 P.S.I. maximum pressure @ 70°F.• Easily repairable.• Open/closed indicator.

¾ Second Response Time¾"-1¼" BOTTOM LOAD ELECTRIC VALVES


PIPE SIZE


EV075BL ¾" Full Port Electric Valve 150 ¾" 1" 1 $461.40EV100BL 1" Electric Valve 150 1" 1" 1 $461.40EV125BL 1¼" Electric Valve 150 1¼" 1" 1 $461.40

¾"-1¼" SIDE LOAD ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EV075SL ¾" Full Port Electric Valve 150 ¾" 1" 1 $461.40EV100SL 1" Electric Valve 150 1" 1" 1 $461.40EV125SL 1¼" Electric Valve 150 1¼" 1" 1 $461.40

¾ Second Response Time


1-800-640-2476


1¼ SECOND RESPONSE TIME



BOTTOM LOAD

3-Way Electric Valves1½", 2" Threaded w/Flanged Inlet


SIDE LOAD

1½"-2" BOTTOM LOAD ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EV150BL 1½" Electric Valve 150EV200BL 2" Electric Valve 150

1½" 1½" 1 $666.042" 1½" 1 $666.04

1½"-2" SIDE LOAD ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EV150SL 1½" Electric Valve 150EV200SL 2" Electric Valve 150

1½" 1½" 1 $666.042" 1½" 1 $666.04

OPEN

CLOSED

CORPOR

ATION

BANJO

OPEN

CLOSED




Don’t forget the manifold connections for inlets


1-800-640-2476

3-Way Electric Valves2" Full Port Threaded w/Flanged Inlet





SIDE LOAD

BOTTOM LOAD


2" FULL PORT BOTTOM LOAD ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EV204BLFP 2" Full Port Electric Valve 150 2" 2" 1 $715.53

2" FULL PORT SIDE LOAD ELECTRIC VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


EV204SLFP 2" Full Port Electric Valve 150 2" 2" 1 $715.53

OPEN

CLOSED

CORPOR

ATION

BANJO

OPEN

CLOSED




Don’t forget the manifold connections for inlets.


1-800-640-2476

[email protected] FLANGE CONNECTIONS MANIFOLD FLANGE CONNECTIONSM

ANIFOLD FLANGE CONNECTIONS

1" Banjo Electric Manifold Valve Assemblies3 Valve Manifold2 Valve Manifold

4 Valve Manifold 5 Valve Manifold

2 VALVE MANIFOLD ASSEMBLY (M200 SERIES)PART NO DESCRIPTION MAX

PSIPIPE SIZE QTY PRICE

MEV102CF 1" Manifold Valve Assembly 2" Inlet Flanges, 1" Outlet Flanges 150 1"

2" OutIn 1 $855.95




2" OutIn 1 $1263.38

3 VALVE MANIFOLD ASSEMBLY (M200 SERIES) W/ MOUNTING BRACKETS


PIPE SIZE QTY PRICE

MEV103MB1" Manifold Valve Assembly 2" Inlet Flanges, 1" Outlet Flanges w/ Mounting Brackets

150 2" In 1" Out 1 $1298.95

FLANGED MOUNTING BRACKET TEEPART NO MAX

PSIDESCRIPTION SIZEPIPE QTY PRICE

M200100TEEB 2" x 1" Standard Port Flanged Tee w/ Mounting Bracket 150 2" In

1" Out 1 $19.19




2" Out

In 1 $1708.40




2" Out

In 1 $2153.26


1-800-640-2476

1/3 Second Response Time1" MICRO ON/OFF ELECTRIC MANIFOLD VALVE


PIPE SIZE


MLEV100 1" Micro Electric Manifold Valve 200 1" ½" 1 $166.68

1" Micro Electric Manifold Valve

Don’t forget the manifold connections.

FEATURES• 12 Volt DC• Stationary current draw: less than 0.04 amps.• Rotating current draw: less than 0.40 amps.• Stall current: 0.75 amps• Response time: 1/3 sec open to close• TFM seats• EPDM seals• Fiberglass reinforced polypropylene ball.• Integrated mounting slot• Standard 3 wire configuration.• Max Pressure = 200 PSI @ 70 °F.

Blac

k

Red

White

White

Battery(12 VDC)

Single PoleSingle ThrowToggle Switch


1-800-640-2476

1"-2" Electric Manifold Valves FEATURES

• 1"-2" has 316 stainless steel ball & stem.• Fiberglass reinforced polypropylene.• Glass reinforced PTFE seats.• FKM (viton type) or EPDM O-rings.• 12-volt DC operated.• 150 P.S.I. maximum pressure.• Internally fused/automatic reset.• Open/closed indicator.

4 SECOND RESPONSE TIME

¾ to 1¼ SECOND RESPONSE TIME


1", 2" & 3" ON/OFF ELECTRIC MANIFOLD VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


MEV100CF 1" Full Port Electric Valve 150 1" 1" 1 $410.60MEV200CF 2" Standard Port Electric Valve 150 2" 1½" 1 $601.85MEV220CF 2" Full Port Electric Valve 150 2" 2" 1 $635.28


1" & 2" REGULATING ELECTRIC MANIFOLD VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


MEVR100CF 1" Full Port Electric Valve 150 1" 1" 1 $568.42MEVR200CF 2" Standard Port Electric Valve 150 2" 1½" 1 $715.53

MEVR220CF 2" Full Port Electric Valve 150 2" 2" 1 $755.64

OPEN

CLOSED

CORPOR

ATION

BANJO

OPEN

CLOSED




1-800-640-2476

3" Electric Manifold Valves FEATURES

• 3" has poly ball & stainless steel stem.• Fiberglass reinforced polypropylene.• Glass reinforced PTFE seats.• FKM (viton type) or EPDM O-rings.• 12-volt DC operated.• 150 P.S.I. maximum pressure.• Internally fused/automatic reset.• Open/closed indicator.

¾ to 1¼ SECOND RESPONSE TIME


3" ON/OFF ELECTRIC MANIFOLD VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


MEV300CF 3" Full Port Electric Valve 100 3" 3" 1 $1732.30


CORPOR

ATION

BANJO

OPEN

CLOSED



1-800-640-2476

FEATURES

• 316 stainless steel ball & stem.• Fiberglass reinforced polypropylene.• Glass reinforced PTFE seats.• FKM (viton type) or EPDM O-rings.• 12-volt DC operated.• 150 P.S.I. maximum pressure.• Internally fused/automatic reset.• Open/closed indicator.

3-Way Side Load Electric Manifold Valves1", 1½", & 2" Full Port

SIDE LOAD:Directional flow left or right. Valve flow cannot be turned off.4 SECOND RESPONSE TIME

¾ to 1¼ RESPONSE TIME1" & 2" SIDE LOAD ELECTRIC MANIFOLD VALVES


PIPE SIZE


MEV100SLCF 1" Full Port Electric Valve 150 1" 1" 1 $461.05MEV200SLCF 2" Standard Port Electric Valve 150 2" 1½" 1 $715.53MEV220SLCF 2" Full Port Electric Valve 150 2" 2" 1 $715.53

1" & 2" REGULATING SIDE LOAD ELECTRIC MANIFOLD VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


MEVR100SLCF 1" Full Port Electric Valve 150 1" 1" 1 $575.10

MEVR200SLCF 2" Standard Port Electric Valve 150 2" 1½" 1 $694.46

MEVR220SLCF 2" Full Port Electric Valve 150 2" 2" 1 $835.86


OPEN

CLOSED

CORPOR

ATION

BANJO

OPEN

CLOSED




1-800-640-2476

FEATURES

• 316 stainless steel ball & stem.• Fiberglass reinforced polypropylene.• Glass reinforced PTFE seats.• FKM (viton type) or EPDM O-rings.• 12-volt DC operated.• 150 P.S.I. maximum pressure.• Internally fused/automatic reset.• Open/closed indicator.

CORPOR

ATION

BANJO

OPEN

CLOSED

3-Way Bottom Load Electric Manifold Valves1", 1½", & 2" Full Port

NOTE: NO Regulating Valve available for 3-way bottom load electric manifold valves.

¾ to 1¼ Response time

Manifold Pressure Spike ValvesFEATURES• Precision molded in polypropylene. Polypropylene is

reinforced with fiberglass for additional strength.• Preset pressure spring.• Poppet is diamond turned, after molding, to make it

spherically perfect, which provides precise seal.• 360° Orientation.• FKM (viton type) seals.

1" & 2" BOTTOM LOAD ELECTRIC MANIFOLD VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


MEV100BLCF 1" Full Port Electric Valve 150 1" 1" 1 $461.40MEV200BLCF 2" Standard Port ElectricValve 150 2" 1½" 1 $715.53MEV220BLCF 2" Full Port Electric Valve 150 2" 2" 1 $715.53


MANIFOLD PRESSURE SPIKE VALVESPART NO DESCRIPTION PRESSURE

SPIKE QTY PRICE

MPRV100-050 1" Pressue Spike Valve 50 PSI 1 $77.42MPRV100-075 1" Pressue Spike Valve 75 PSI 1 $77.42MPRV100-100 1" Pressue Spike Valve 100 PSI 1 $71.36MPRV100-125 1" Pressue Spike Valve 125 PSI 1 $71.36MPRV100-150 1" Pressue Spike Valve 150 PSI 1 $71.36


1-800-640-2476

*Valve repair kits contain items marked with asterisk1 Ball 2 Body O-Rings 1 Thrust Washer2 Ball Seats 1 Upper Stem Bushing 1 Stem O-Ring

Manifold Bolted Ball Valves4 and 6 Bolt Valves

FEATURES• FKM (viton type) seals.• PTFE self-lubricating stem bush ings and

seats cannot stick or bind.• Precision molded in polypropylene. Polypropylene is reinforced

with fiberglass for additional strength.• Self-aligning ball moves freely against the PTFE seats for

smooth operation. The valve opens and closes with very littlepressure on the handle.


5 4CHART 1 CHART 2

MANIFOLD 4 & 6 BOLTED VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


MV100CF 1" Flange Ball Valve 150 1" 1" 24/box $38.69

MV200CF 2" Flange Ball Valve 150 2" 1½" 12/box $54.74

MV220CF 2" Full Port Flange Ball Valve 150 2" 2" 8/box $72.97

MV300 3" Standard Flange Ball Valve 100 3" 2½" 6/box $119.79

MV300CF 3" Full Port Flange Ball Valve 100 3" 3" 6/box $173.64

$ 1034.33


1-800-640-2476

Manifold Bolted 5 Way Ball ValveFEATURES• FKM (viton type) seals.• PTFE self-lubricating stem bush ings and

seats cannot stick or bind.• Precision molded in polypropylene. Polypropylene is reinforced

with fiberglass for additional strength.• Self-aligning ball moves freely against the PTFE seats for

smooth operation. The valve opens and closes with very littlepressure on the handle.


MANIFOLD BOLTED 5 WAY VALVEPART NO DESCRIPTION MAX

PSIPIPE SIZE


MV225CF 2" Full Port Flange 5 Way Valve 150 2" 2" 1 $346.07


1-800-640-2476

Manifold Valves 2" Standard Port Manifold “Stubby” Valve

VSMT200CF VSF200CF

FEATURES

MVS220FP

MVSF220FP

• Stainless steel bolts.• Glass reinforced polypropylene.• Multiple design options.• Unique patented compact design.• Lightweight.• Maximum operating pressure 100 P.S.I. @ 70°F. 75 P.S.I. @ 150°F.

MVS220CF

2" MANIFOLD STUBBY VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


VSMT200CF 2" Flange x 2" Male NPT 100 2"VSF200CF 2" Flange x 2" Male Adapter 100 2"

1½" 24/box $53.151½" 24/box $54.74

2" FULL PORT MANIFOLD STUBBY VALVESPART NO DESCRIPTION MAX

PSIPIPE SIZE


MVS220FP 2" FP Flange x 2" Female NPT 100 2" 2" 8/box $66.08MVSF220FP 2" FP Flange x 2" Male Adapter 100 2" 2" 8/box $66.08MVS220CF 2" FP Flange x 2" FP Flange 100 2" 2" 8/box $66.08MVSMT220FP 2" FP Flange x 2" Male NPT 100 2" 2" 8/box $66.08

MVSMT220FP

Manifold Valves 2" Full Port Manifold “Stubby” Valve

PATENTED ™

PATENTED ™


1-800-640-2476

Manifold Valves 3" Manifold “Stubby” Valve

FEATURES• Stainless steel bolts.• Glass reinforced polypropylene.• Multiple design options.• Unique patented compact design.• Lightweight.• Maximum operating pressure 100 P.S.I. @ 70°F. 75 P.S.I. @ 150°F.

MVSF300

MVSMT300


PSIPIPE SIZE


MVSF300 3" Flange x 3" Male Adapter 100 3" 2½" 6/box $135.10

MVSF300FP 3" Full Port Flange x 3" Male Adapter 100 3" 3" 1 $168.38

MVSMT300 3" Flange x 3" Male NPT 100 3" 2½" 6/box $140.69

MVS300CF


PSIPIPE SIZE


MVS300CF 3" Flange x 3" Flange 100 3" 2½" 1/box $135.10

MVS300CFFP 3" Full Port Flange x 3" Full Port Flange 100 3" 3" 1/box $165.26

MVS300CFFP

MVSF300FP

PATENTED ™


1-800-640-2476

BOTTOM LOAD: Directional flow right or left. Valve can be turned off to stop flow.

MV100BL

3" 3-WAY

MV300BL

MV200BL MV220BL

4 BOLT BOTTOM LOAD MANIFOLD VALVESPART NO DESCRIPTION MAX

PSIFLANGE

SIZEOPENING

THRU BALLHANDLE

TYPE QTY PRICE

MV100BL 1" Manifold Flanged Valve 100 1" 1" T 18/box $50.66MV200BL 2" Manifold Flanged Valve 100 2" 1½" T 12/box $65.51MV220BL 2" Full Port Manifold Flanged Valve 100 2" 2" Straight 8/box $103.73

6 BOLT BOTTOM LOAD MANIFOLD VALVESPART NO DESCRIPTION MAX

PSIFLANGE

SIZEOPENING

THRU BALLHANDLE

TYPE QTY PRICE

MV300BL 3" Full Port Manifold Flanged Valve 100 3" 3" Straight 4/box $278.07

FEATURES• Stainless steel bolts.• Precision molded in polypropylene. Polypro py lene is reinforced with fiber glass for additional strength.• Self-aligning ball moves freely against the PTFE seats for smooth operation.• The valve opens and closes with very little pressure on the handle.• Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.• PTFE self-lubricating stem bushings and seats cannot stick or bind.• Maximum operating pressure 100 P.S.I.• FKM (viton type) seals.

3-Way Manifold Ball Valves

BOTTOM LOAD: Directional flow right or left. Valve can be turned off to stop flow.


1-800-640-2476

FEATURES• Stainless steel bolts.• Precision molded in polypropylene. Polypro py lene is reinforced with fiber glass for additional strength.• Self-aligning ball moves freely against the PTFE seats for smooth operation.• The valve opens and closes with very little pressure on the handle.• Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.• PTFE self-lubricating stem bushings and seats cannot stick or bind.• Maximum operating pressure 100 P.S.I.• FKM (viton type) seals.

3-Way Manifold Ball Valves

SIDE LOAD: Directional flow right or left. Valve cannot be turned off.

MV100SL MV200SL

MV220SL

4 BOLT SIDE LOAD MANIFOLD VALVESPART NO DESCRIPTION MAX

PSIFLANGE

SIZEOPENING

THRU BALLHANDLE

TYPE QTY PRICE

MV100SL 1" Manifold Flanged Valve 100 1" 1" T 18/box $50.66

MV200SL 2" Manifold Flanged Valve 100 2" 1½" Straight 10/box $65.51

MV220SL 2" Full Port Manifold Flanged Valve 100 2" 2" Straight 8/box $103.73

MVT220SL* 2" Full Port Manifold Flanged Valve 100 2" 2" T 8/box $103.73

* Non-Stock Item

MVT220SL


1-800-640-2476

FEATURES

• Lightweight.• Unrestricted flow.• Minimal fluid spillage.• Easy to use.• Economical.• Reduces risk of exposure.• Wide range of chemical resistance.• Cannot be uncoupled in open position.• Handles cannot be opened after male and female are separated.• 100 P.S.I. maximum operating pressure.

Note: Male & female sold separately.

MALE FEMALE

Manifold Dry Disconnect

FEATURES• Threaded or manifold ends.• Glass reinforced polypropylene.• 1½" & 2" sizes available.

PSI

60

50

40

30

20

10

10 20 30 40 50 60

Suction USGP

MHV200MHV220A

HV150HV200

NOTE: The inductor is designed for use with a volume pump. Typical volumes and pressures used to operate the venturi would be in the 80 to 240 US GPM range at pressures from 26 to 52 P.S.I.

Polypropylene Inductors

Patented Double Ball design with cam lever connection!

2" MANIFOLD DRY DISCONNECTPART NO DESCRIPTION MAX

PSIFLANGE

SIZEOPENING

THRU BALL QTY PRICE

DM200ACF 2" Flanged Male Dry-Mate w/FKM (viton type) Seals 100 2" 1½" 1 $205.49

DM200DCF 2" Flanged Female Dry-Mate w/FKM (viton type) Seals 100 2" 1½" 1 $219.65

POLY INDUCTORSPART NO DESCRIPTION PRESSURE

AT PUMPVOLUME DRAW*

OPENING SIZE QTY PRICE

HV150 1½" MPT Poly Inductor 50 PSI 37GPM 5⁄16" 1 $102.67HV200 2" MPT Poly Inductor 50 PSI 49GPM 7⁄16" 1 $102.67

MHV200 2" Manifold Poly Inductor with 1½" Port 50 PSI 37GPM 5⁄16" 1 $102.67

MHV220A 2" FP Manifold Poly Inductor 50 PSI 49GPM 9⁄16" 1 $102.67

Each venturi comes in two pieces:

patented

3" MANIFOLD DRY DISCONNECTPART NO DESCRIPTION MAX

PSIFLANGE

SIZEOPENING

THRU BALL QTY PRICE

DM300ACF 3" Flanged Male Dry-Mate w/ FKM(viton type) Seals 100 3" 3" 1 $368.47

DM300DCF 3" Flanged Female Dry-Mate w/ FKM(viton type) Seals 100 3" 3" 1 $411.82

NEW!


1-800-640-2476

300 GPM!

Flow Meters FEATURES• Displays overall total volume & batch total volume!• Flow rate allows for Gallons or Liters Per Minute.• The display reads 6 digits for Rate, 8 digits for Total

and 1 decimal place reading in tenths.• Magnetic style meter with stainless steel electrodes.• Self calibrating meter.• Measures water and most conductive liquids*.• Easy to change six (6) AA batteries.• No moving parts to fail during use.• Glass-reinforced polypropylene.• Temperature range from 0º F to 150º F.• Accuracy is 99% from 2 to 110 GPM for 1".• Accuracy is 99% from 6 to 300 GPM for 2".• Accuracy is 99% from 14 to 670 GPM for 3".• There are 3 photoeyes located on the face of the flowmeter.

Note: These are not push buttons, to activate you must hold your finger over the photoeye for 2-4 seconds.* Will not read petroleum based liquids.

FLOW METERSPART NO DESCRIPTION MAX PSI QTY PRICEFM100 1" Full Port Female NPT Flow Meter 150 1 $988.55MFM100 1" Full Port Manifold Flow Meter 150 1 $988.55MFM220 2" Full Port Manifold Flow Meter 150 1 $1123.26MFM300 3" Full Port Manifold Flow Meter 150 1 $1409.30

FM100

MFM100

MFM220

110 GPM!

670 GPM!

Note: It is recommended to have at least 10x the diameter of straight pipe before and after the flow meter.

MFM300


1-800-640-2476

[email protected] FLANGE CONNECTIONS MANIFOLD FLANGE CONNECTIONS

FEATURES• Direct replacement for standard 90° flanged couplings.• Positive seals.• Quick & easy assembly.• Easy On/Off hose connections.• 360˚ Orientation.• 1" & 2" fittings pressure to 150 P.S.I. at 70°F.• 3" fittings pressure to 125 P.S.I. at 70°F.

SWEEPSPART NO DESCRIPTION QTY PRICE

M100125BRBSWP90 1" Flange x 1¼" Hose Shank Sweep 1 $13.60

M100BRBSWP90 1" Flange x Hose Shank Sweep 1 $12.41

M100SWP90 1" Flange x Flange Sweep 1 $11.05


M220200SWP90 2" Full Port Flange x 2" Flange Sweep 1 $13.57

M220ASWP90 2" Full Port Flange x Male Adapter Sweep 1 $12.76

M220BRBSWP90 2" Full Port Flange x Hose Shank Sweep 1 $30.13M220MPTSWP90 2" Full Port Flange x Male NPT Thread Sweep 1 $12.76

M220SWP90 2" Full Port Flange x Flange Sweep 1 $12.76

M220SWP90SS 2" Full Port SS Flange x Flange Sweep 1 $97.69

M300ASWP90 3" Flange x Male Adapter Sweep 1 $58.57

M300BRBSWP90 3" Flange x Hose Shank Sweep 1 $58.57

M300MPTSWP90 3" Flange x Male NPT Thread Sweep 1 $58.57


SWEEPS w/Gauge PortPART NO DESCRIPTION QTY PRICE

M100125BRBSWPG90 1" Full Port Flange x 1¼" Hose Shank Sweep w/ ¼" gauge port 1 $13.49

M100BRBSWPG90 1" Full Port Flange x 1" Hose Shank Sweep w/ ¼" gauge port 1 $13.77

M100SWPG90 1" Flange x Flange Sweep with ¼" gauge port 1 $13.77

M300ASWPG90 3" Flange x Male Adapter Sweep w/ ¼" gauge port 1 $58.57

M300MPTSWPG90 3" Flange x Male NPT Thread Sweep w/¼" gauge port 1 $58.57

M300SWPG90 3" Flange x Flange Sweep w/ ¼" gauge port 1 $58.57

M220SWP90M220BRBSWP90 M220MPTSWP90

M220ASWP90

M300ASWPG90

M300ASWP90 M300SWP90

M300SWPG90

M300MPTSWP90

M300MPTSWPG90

Improved Flow for Max GPM!

Sweeps

M200SWP90 M220200SWP90

M220SWP90SS

M300BRBSWP90

M100SWP90

M100SWPG90

M100BRBSWP90

M100BRBSWPG90

M100125BRBSWP90

NEW!

M100125BRBSWPG90


1-800-640-2476


U BOLTS-SSPART NO DESCRIPTION QTY PRICE

UB100 100 Series Mounting U Bolt 1 $6.75UB202 200 Series Mounting U Bolt 1 $21.22UB220 220 Series Mounting U Bolt 1 $22.40

FLANGED COUPLINGSPART NO DESCRIPTION QTY PRICE

M100CPG 1" x 1" Flange x 2¼" Long 10 $4.30M200CPG 2" x 2" Flange x 4½" Long 1 $11.34M220CPG 2" x 2" Full Port Flange x 2 31⁄32" 1 $12.74M220CPG6 2" x 2" Full Port Flange x 6" Long 1 $16.27M300CPG 3" x 3" Full Port Flange x 4" Long 1 $15.01M300CPG7 3" x 3" Full Port Flange x 7" Long 1 $16.09

90° FLANGED COUPLINGSPART NO DESCRIPTION QTY PRICE

M100CPG90 1" x 1" 90° Flange 10 $6.01M200CPG90 2" x 2" 90° Flange 1 $10.05M200CPG90SH 2" x 2" 90° Short Flange 1 $10.05M220CPG90 2" x 2" 90° Full Port Flange 1 $10.05M300CPG90 3" x 3" 90° Full Port Flange 1 $47.79

45° FLANGED COUPLINGSPART NO DESCRIPTION QTY PRICE

M100CPG45 1" x 1" 45° Flange 10 $8.93M200CPG45 2" x 2" 45° Flange 10 $11.60M220CPG45 2" x 2" 45° Full Port Flange 1 $13.97M300CPG45 3" x 3" 45° Full Port Flange 1 $57.16

FLANGED REDUCER COUPLINGSPART NO DESCRIPTION QTY PRICE

M200100CPG 2" Port x 1" Reducer Flange 10 $12.87M220100CPG 2" Full Port x 1" Reducer Flange 1 $12.87M220200CPG 2" Full Port x 2" Reducer Flange 1 $12.87M300200CPG 3" x 2" Port Reducer Flange 1 $30.03M300220CPG 3" x 2" Full Port Reducer Flange 1 $30.03

FLANGED TEEPART NO DESCRIPTION QTY PRICE

M100TEE 1" Flanged Tee 10 $5.53M101TEE 1" Flanged Tee - Long 10 $5.53M200100TEE 2" Port x 1" Flanged Tee 1 $11.15M200TEE 2" Port Flanged Tee 1 $11.63M200100TEEB 2" x 1" Port Flanged Tee w/Mounting Bracket 1 $16.31M220100TEE 2" Full Port Flanged Tee x 1" Flanged Tee 1 $11.77M220200TEE 2" Full Port Flanged Tee x 2" Flanged Tee 1 $18.21M220TEE 2" Full Port Flanged Tee 1 $11.63M300TEE 3" Flanged Tee 1 $54.85

45° Y FLANGED COUPLINGSPART NO DESCRIPTION QTY PRICE

M220Y45 2" Full Port 45° Y Flange 10 $56.61M200YG45 2" 45° Y Flange w/ ¾" gauge port* 10 $58.33M220YG45 2" Full Port 45° Y Flange w/ ¾" gauge port* 10 $61.44M300Y45 3" Full Port 45° Y Flange 1 $103.13M300YG45 3" Full Port 45° Y Flange w/ ¾" gauge port* 1 $107.77

Note: *Gauge not included.

BUTT WELD PIPE SWEEPPART NO DESCRIPTION QTY PRICE

BW220SWP90SS 2"90º Full Port Stainless Steel Butt Weld Pipe Sweep 1 $55.48

MANIFOLD BUTT WELD ADAPTERPART NO DESCRIPTION QTY PRICE

M220BWASS 2" Full Port Stainless Steel Manifold Butt Weld Adapter 1 $65.45NEW!


1-800-640-2476

FLANGE x MALE QDCPART NO DESCRIPTION QTY PRICE

M100A 1" Flange x 1" Male Adapter 10 $5.24

M200A 2" Flange x 2" Male Adapter 10 $7.00

M220A 2" Full Port Flange x 2" Male Adapter 10 $7.70

M300A 3" Full Port Flange x 3" Male Adapter 1 $16.42

FLANGE x HOSE BARBPART NO DESCRIPTION QTY PRICE

M100075BRB 1" Flange x ¾" Hose Barb 10 $1.60

M100BRB 1" Flange x 1" Hose Barb 10 $1.60

M100125BRB 1" Flange x 1¼" Hose Barb 10 $1.60


M200125BRB 2" Flange x 1¼" Hose Barb 10 $4.89

M200150BRB 2" Flange x 1½" Hose Barb 10 $4.30


M220100BRB 2" Full Port Flange x 1" Hose Barb 1 $4.30

M220125BRB 2" Full Port Flange x 1¼" Hose Barb 1 $4.30

M220150BRB 2" Full Port Flange x 1½" Hose Barb 1 $4.30

M220250BRB 2" Full Port Flange x 2½" Hose Barb 1 $6.68

M220BRB 2" Full Port Flange x 2" Hose Barb 1 $4.30



FLANGE x MALE NPT THREAD -316SSPART NO DESCRIPTION QTY PRICE

M100MPTSS 1" Flange x 1" Male Thread 1 $20.63

M200125MPTSS 2" Flange x 1¼" Male Thread 1 $32.26

M200150MPTSS 2" Flange x 1½" Male Thread 1 $32.26


M220150MPTSS 2" Full Port Flange x 1½" Male Thread 1 $46.87

M220MPTSS 2" Full Port Flange x 2" Male Thread 1 $46.87

M300220MPTSS 3" Flange x 2" Full Port Male Thread 1 $96.92


FLANGE x FEMALE QDCPART NO DESCRIPTION QTY PRICE

M220D 2" Full Port Flange x 2" Female Coupler 1 $19.45

M303D 3" Full Port Flange x 3" Female Coupler w/3 Arms 1 $37.33

Manifold FittingsFEATURES

• Positive seals.• Quick & easy assembly.• Easy On/Off hose connections.• 360˚ Orientation.• 1" & 2" fittings pressure to 150 P.S.I. at 70°F.• 3" fittings pressure to 125 P.S.I. at 70°F.

FLANGE x MALE BSP(BRITISH STANDARD PIPE)PART NO DESCRIPTION QTY PRICE

M100BSP 1" Manifold Flange x 1" Male BSP 10 $1.84M200BSP 2" Manifold Flange x 2" Male BSP 10 $3.80M220BSP 2" Full Port Manifold Flange x 2" Male BSP 10 $3.80M300BSP 3" Full Port Manifold Flange x 3" Male BSP 1 $11.63

FLANGE x FEMALE NPT THREADPART NO DESCRIPTION QTY PRICE

M100050FPT 1" Flange x ½" Pipe Thread 10 $1.84M100075FPT 1" Flange x ¾" Pipe Thread 10 $1.84M100FPT 1" Flange x 1" Pipe Thread 10 $3.48M200FPT 2" Flange x 2" Pipe Thread 1 $11.03M220FPT 2" Full Port Flange x 2" Pipe Thread 1 $19.55M300FPT 3" Flange x 3" Pipe Thread 1 $31.50

FLANGE x NPT THREADPART NO DESCRIPTION QTY PRICE

M100075MPT 1" Flange x ¾" Male Thread 10 $1.84M100MPT 1" Flange x 1" Male Thread 10 $1.84M100125MPT 1" Flange x 1¼" Male Thread 10 1.84

M200125MPT 2" Flange x 1¼" Male Thread 10 3.80

M200150MPT 2" Flange x 1½" Male Thread 10 $3.80M200MPT 2" Flange x 2" Male Thread 1 $3.80M220MPT 2" Full Port Flange x 2" Male Thread 1 $3.80

M300MPT 3" Flange x 3" Male Thread 1 $11.63

FLANGE PLUGS (SOLID & W/GAUGE PORT)PART NO DESCRIPTION QTY PRICE

M100PLG 1" Flange Plug 10 $1.84


M220PLG 2" Full Port Flange Plug 10 $4.82


M100PLG025 1" Flange Plug with ¼" FPT 10 $9.80

M100PLG050 1" Flange Plug with ½" FPT 10 $9.80

M200PLG018 2" Flange Plug with 1⁄8" FPT 10 $11.52

M200PLG025 2" Flange Plug with ¼" FPT 10 $11.52

M200PLG038 2" Flange Plug with 3⁄8" FPT 10 $11.52

M200PLG050 2" Flange Plug with ½" FPT 10 $11.52

M200PLG075 2" Flange Plug with ¾" FPT 10 $11.52

M200PLG100 2" Flange Plug with 1" FPT 10 $11.52

M220PLG075 2" Full Port Flange Plug with ¾" FPT 10 $19.31

M300PLG075 3" Flange Plug with ¾" FPT 10 $20.83

M300PLG100 3" Flange Plug with 1" FPT 10 $21.47

NEW!


1-800-640-2476


FLANGED CROSSPART NO DESCRIPTION QTY PRICE

M100CR 1" Flanged Cross 10 $16.22


M220CR 2" Full Port Flanged Cross 1 $29.10

M220CRSS 2" Full Port SS Flanged Cross 1 $178.18


FLANGE x 90° HOSE BARB ELBOWPART NO DESCRIPTION QTY PRICE

M100075BRB90 1" Flange x ¾" 90° Hose Barb Elbow 10 $1.93

M100BRB90 1" Flange x 1" 90° Hose Barb Elbow 10 $1.93

M100125BRB90 1" Flange x 1¼" 90° Hose Barb Elbow 10 $1.93

M100150BRB90 1" Flange x 1½" 90° Hose Barb Elbow 10 $14.39


M200125BRB90 2" Flange x 1¼" 90° Hose Barb Elbow 10 $7.97



M220150BRB90 2" Full Port Flange x 1½" 90° Hose Barb Elbow 1 $7.97

M220BRB90 2" Full Port Flange x 2" 90° Hose Barb Elbow 1 $7.97



FLANGE x HOSE BARB TEEPART NO DESCRIPTION QTY PRICE

M100100HBT 1" Flange x 1" Hose Barb Tee 10 $6.88

M100125HBT 1" Flange x 1¼" Hose Barb Tee 10 $8.46

M220200HBT 2" Full Port Flange x 2" Hose Barb Tee 1 $12.75

M300300HBT 3" Flange x 3" Hose Barb Tee 1 $27.78




M220BRB45 2" Full Port Flange x 2" 45° Hose Barb Elbow 10 $17.65


FLANGE GASKETSPART NO DESCRIPTION QTY PRICE

M100G 1" EPDM Manifold Gasket 1 $1.84

M101G* 1" EPDM Manifold Gasket with Rib 1 $1.53

M100GV 100 Series FKM (viton type) Gasket 1 $4.89

150G 1½" EPDM Gasket 1 $.88

150GV 200 Series FKM (viton type) Gasket 1 $9.78

200G 220 Series Full Port EPDM Gasket 1 $.93

200GV 220 Series Full Port FKM (viton type) Gasket 1 $15.15


M221G* 2" Full Port EPDM Manifold Gasket with Rib 1 $1.77

300G 3" EPDM Gasket 1 $1.28

300GV 300 Series FKM (viton type) Gasket 1 $20.80


FLANGE CLAMPSPART NO DESCRIPTION TORQUE QTY PRICE

FC100 100 Series Worm Screw Clamp 50-60 in/lbs 10 $8.75




Rib keeps gasket in place during assembly.



T-BOLT FLANGE CLAMPSPART NO DESCRIPTION TORQUE QTY PRICE

FC220TB 2" Full Port Hi-Torque T-Bolt Flange Clamp 125 in/lbs 10 $27.23

FC300TB 3" Full Port Hi-Torque T-Bolt Flange Clamp 125 in/lbs 10 $28.44

T-Bolt

BOLTED FLANGE CLAMPSPART NO DESCRIPTION TORQUE QTY PRICE

FC220B 2" Full Port Bolted Flange Clamp 150 in/lbs 1 $38.49

FC300B 3" Bolted Flange Clamp 150 in/lbs 1 $42.89

BoltedTeflon coated SS nut

For Heavy duty use!


1-800-640-2476

Manifold Y Line Strainers

FEATURES• EPDM gaskets.• 316 stainless steel screens.• 150 P.S.I. maximum.


2" MANIFOLD Y LINE STRAINERSPART NO DESCRIPTION MAX

PSI QTY PRICE

MLS200-06 2" Manifold Y Strainer w/6 Mesh Screen 150 1 $77.33





MLS200-50M 2" Manifold Y Strainer w/Mounting Bracket w/50 Mesh Screen 150 1 $85.13





PSI QTY PRICE






Manifold T Line Strainers

1" MANIFOLD T LINE STRAINERSPART NO DESCRIPTION MAX

PSI QTY PRICE

MLST100-16 1" Manifold T Strainer w/16 Mesh Screen 150 1 $36.13





2" MANIFOLD T LINE STRAINERSPART NO DESCRIPTION MAX

PSI QTY PRICE






NEW!


1-800-640-2476

Manifold Y Line Strainers



Easy off threaded strainer ring!

Threaded end cap to remove screen!


PSI QTY PRICE





MLS300-50 3" ManifoldY Strainer w/50 Mesh Screen 100 1 $431.55

2" FULL PORT MANIFOLD Y LINE STRAINERSPART NO DESCRIPTION MAX

PSI QTY PRICE

MLS222-04 2" Full Port Manifold Y Strainer w/4 Mesh Screen 150 1 $118.03









*WARNING: 3" Polypropylene “Y” Strainer to be used on suctionside or non-pressure side in all applications.


1-800-640-2476

Manifold Bolted Tank Fittings “Bottom Drain”FEATURES

• Stainless steel bolts.• Bolt head plugs sealed ultrasonically.• Glass reinforced polypropylene.• EPDM gaskets standard.• FKM (viton type) available.

Note: Tank not included.

Longer bolts available for thicker tanks! See page 235.See page 113 for gaskets.

Fully Drainable!

™

3" 6-bolt

3"

1"-2" 4-bolt

MANIFOLD BOLTED BOTTOM DRAIN TANK FLANGESPART NO DESCRIPTION QTY PRICE

MBF100BD 1" Flange x 1" EPDM Female Thread 27 $42.12

MBF100BDV 1" Flange x 1" FKM(viton type) Female Thread 27 $63.69

MBF150200BD 2" Flange x 1½" EPDM Female Thread 27 $39.99

MBF150200BDV 2" Flange x 1½" FKM (viton type) Female Thread 27 $114.66



MBF220BD 2" Full Port Flange x 2" EPDM Female Thread 27 $53.39

MBF220BDV 2" Full Port Flange x 2" FKM(viton type)Female Thread 27 $121.04



MANIFOLD BOLTED TANK FLANGESPART NO DESCRIPTION QTY PRICE

MBF100 1" Flange x 1" EPDM Female Thread 27 $31.70

MBF100V 1" Flange x 1" FKM (viton type) Female Thread 27 $82.80



MBF220 2" Full Port Flange x 2" EPDM Female Thread 27 $54.14

MBF220V 2" Full Port Flange x 2" FKM (viton type) Female Thread 27 $142.04



Manifold Bolted Tank Fittings

PATENTED

MANIFOLD POLY BULKHEAD FITTINGSPART NO DESCRIPTION HOLE SIZE QTY PRICE

MTF220 2" Manifold Poly Bulkhead EPDM Tank Fitting 3¼" 1 $27.09

MTF300 3" Manifold Poly Bulkhead EPDM Tank Fitting 4½" 1 $46.23

MANIFOLD POLY BOTTOM DRAIN TANK FLANGESPART NO

MTF220BDMTF300BD

DESCRIPTION HOLE SIZE QTY PRICE 2" x 2" Full Port Manifold EPDM Flange 3¼" 1 $27.55 3" x 3" Manifold EPDM Flange 4½" 1 $48.18

*Gasket and clamp not included. Please see page 85 for items.

*Note

*Gasket not included. Please see page 85 for items.

*Note *Note

*NoteGroove allows more drainage!

Manifold “Bottom Drain” & Bulkhead Tank Fittings ™PATENTED


1-800-640-2476

DRY-DISCONNECTSDRY-DISCONNECTS

Male Adapter Dry Poppet DPCMT100

Female Coupling Dry Poppet DPCF100

Dry Poppet CouplingsFEATURES• Lightweight.• Minimal fluid spillage.• Easy to use.• Economical.• Reduces risk of exposure.• Wide range of chemical resistance.• Maximum operating pressure 70 P.S.I. @ 70°F.• Maximum operating temperature 150°F.• 30 GPM maximum flow.• Precision molded in polypropylene.• 1" Female NPT threads.

APPLICATIONS• Agriculture• Industrial• Pharmaceutical• Chemical processing

Male Adapter & Female Coupler shown coupled together but sold separately.

1" Female NPT Threads

2" Male NPT Thread

Pull back to disconnect!

DRY POPPET COUPLINGSPART NO DESCRIPTION QTY PRICE

DPCF100 Female Dry Poppet Coupler, 1" Female NPT Threads w/ FKM (viton type) Seals 1 $131.52

DPCM100 Male Dry Poppet Adapter, 1" Female NPT Threads w/ FKM (viton type) Seals 1 $119.63

DPCMT100 Male Dry Poppet Adapter, w/2" Male Threaded Body, 1" Female NPT Threads w/ FKM (viton type) Seals 1 $119.62

Male Adapter Dry Poppet DPCM100

2" Male NPT Thread


1-800-640-2476

Prevents Accidental Spills And Exposure! Patented Double Ball Design With Cam Lever Connection!

1½" Polypropylene Dry-Disconnect

Comes complete with dust covers to protect balls and

seals when not in use. Lanyard included.

Female Dry-Mate

User friendly: Operating a Banjo Dry-Mate is simple. The handles interlock making it easy to identify which handle opens or closes first. No guessing involved! The two Dry-Mate halves couple together with cam levers for positive engagement.Design: The Banjo Dry-Mate is designed for safe and easy spill free connections. The “double ball” design allows maximum flow, while the cam lever style of connection is the most recognized fluid connector.

patented

FEATURES• Lightweight.• Unrestricted 1½" flow.• Minimal fluid spillage.• Easy to use.• Economical.• Reduces risk of exposure.• Wide range of chemical resistance.• Cannot be uncoupled in open position.• Spillage Data: 1½" = 2 ml and 2" = 2 ml• Maximum operating pressure 100 P.S.I.

@ 70°F or 70 P.S.I. @ 150°F.

Old style Dry-Mate

Manifold Connection also available page 78.

Interlocking Handles

316 Stainless Steel Cam Levers

PTFE Seats

FKM (viton type) Face Seal, EPDM & Kalrez optional

Fiberglass Reinforced Polypropylene

Double BallConcave/Convex

Automatic Safety Lock

Buttons

Low Profile Handles Available

Female Dry-MateMale Dry-Mate

POLY DRY-MATE SETSPART NO DESCRIPTION MAX

PSIPIPE SIZE


DM150AD 1½" Poly Dry-Mate Set 100 1½" 1½" 1 $425.17

POLY MALE DRY-MATEPART NO DESCRIPTION MAX

PSIPIPE SIZE


DM150A 1½" Male x FPT NPT 100 1½" 1½" 1 $205.49

DM150AB 1½" Male x FPT BSP w/FKM Seals 100 1½" 1½" 1 $205.49

DM150ABE 1½" Male x FPT BSP w/EPDM Seals 100 1½" 1½" 1 $205.49

DM150ABT 1½" Male x FPT BSP w/ Kalrez® Seals 100 1½" 1½" 1 $1527.65

DM150AE 1½" Male x FPT NPT w/EPDM Seals 100 1½" 1½" 1 $205.49

DM150AT 1½" Male x FPT NPT w/Kalrez® Seals 100 1½" 1½" 1 $1527.65

POLY FEMALE DRY-MATEPART NO DESCRIPTION MAX

PSIPIPE SIZE


DM150D 1½" Female x FPT NPT 100DM150DB 1½" Female x FPT BSP 100

1½" 1½" 1 $219.65 1½" 1½" 1 $219.65

DM150DBE 1½" Female x FPT BSP w/EPDM Seals 100 1½" 1½" 1 $219.65

DM150DBT 1½" Female x FPT BSP w/Kalrez® Seals 100 1½" 1½" 1 $1527.65

DM150DEDM150DT

1½" Female w/EPDM Seals 100 1½" 1½" 1 $205.491½" Female w/Kalrez® Seals 100 1½" 1½" 1 $1527.65

DMMT201A

Male Threads


1-800-640-2476

Prevents Accidental Spills And Exposure! Patented Double Ball Design With Cam Lever Connection!

2" Polypropylene Dry-Disconnect

Comes complete with dust covers to protect balls and

seals when not in use. Lanyard included.

Female Dry-Mate


patented

FEATURES• Lightweight.• Unrestricted 1½" flow.• Minimal fluid spillage.• Easy to use.• Economical.• Reduces risk of exposure.• Wide range of chemical resistance.• Cannot be uncoupled in open position.• Spillage Data: 1½" = 2 ml and 2" = 2 ml• Maximum operating pressure 100 P.S.I.

@ 70°F or 70 P.S.I. @ 150°F.

Old style Dry-Mate

Manifold Connection also available page 62.

Interlocking Handles

316 Stainless Steel Cam Levers

PTFE Seats

FKM (viton type) Face Seal, EPDM & Kalrez optional

Fiberglass Reinforced Polypropylene

Double BallConcave/Convex

Automatic Safety Lock

Buttons

Low Profile Handles Available

Female Dry-MateMale Dry-Mate

POLY DRY-MATE SETSPART NO DESCRIPTION MAX

PSIPIPE SIZE


DM200AD 2" Poly Dry-Mate Set 100 2" 1½" 1 $425.17

POLY MALE DRY-MATEPART NO DESCRIPTION MAX

PSIPIPE SIZE


DM200A 2" Male x FPT NPT 100 2"DM200AB 2" Male x FPT BSP 100 2"

1½" 1 $205.49

1½" 1 $205.49

DM200AE 2" Male x FPT NPT w/EPDM Seals 100 2" 1½" 1 $205.49

DM200AT 2" Male x FPT NPT w/ Kalrez® Seals 100 2" 1½" 1 $1527.39

DMMT201A 2" Male x Male NPT w/low profile handle 100 2" 1½" 1 $215.19

DMMT201AE 2" Male x Male NPT w/low profile handle w/EDPM Seals 100 2" 1½" 1 $215.19

POLY FEMALE DRY-MATEPART NO DESCRIPTION MAX

PSIPIPE SIZE


DM200D 2" Female x FPT NPT 100 2"DM200DB 2" Female x FPT BSP 100 2"DM200DE 2" Female w/EPDM Seals 100 2"DM200DT 2" Female w/Kalrez® Seals 100 2"

1½" 1 $215.19

1½" 1 $215.19

1½" 1 $215.19

1½" 1 $1527.39

DMMT201A

Male Threads


1-800-640-2476

FEATURES• Lightweight.• Unrestricted 3" flow.• Minimal fluid spillage.• Easy to use.• Economical.• Reduces risk of exposure.• Wide range of chemical resistance.• Cannot be uncoupled in open position.• Spillage Data: 3" = 25 ml• Maximum operating pressure 100 P.S.I.

@ 70°F or 75 P.S.I. @ 150°F.

APPLICATIONS• Agriculture• Industrial• Pharmaceutical• Chemical processing

Female Dry-MateDM300DFP

PREVENTS ACCIDENTAL SPILLS AND EXPOSURE!

Male & Female Sold Separately

patented

Male & Female shown coupled together.Male & Female sold separately as shown below.

3" FULL PORT POLY DRY-MATEPART NO DESCRIPTION MAX

PSIPIPE SIZE


DM300AFP 3" FP Male x 3" Female NPT Threads w/ FKM(viton type) Seals 100 3" 3" 1 $368.47

DM300ABFP 3" FP Male x 3" BSP Threads w/ FKM(viton type) Seals 100 3" 3" 1 $368.47

DM300DFP 3" FP Female x 3" Female NPT Threads w/ FKM(viton type) Seals 100 3" 3" 1 $411.82

DM300DBFP 3" FP Female x 3" BSP Threads w/ FKM(viton type) Seals 100 3" 3" 1 $411.82

Male Dry-MateDM300AFP


3" Polypropylene Dry-Disconnect


1-800-640-2476

Poly IBC/Spray Tank Lids

Spring Loaded Vent

TL6531231MPT

6" IBC SOLID TANK LIDSPART NO DESCRIPTION GASKET QTY PRICETL650S 6" Solid Tank Lid w/Gasket Santoprene 1 $13.11

TL650E 6" Solid Tank Lid w/Gasket EPDM 1 $14.34

6" IBC TANK LIDS W/UNVENTED 2" PLUGPART NO DESCRIPTION GASKET QTY PRICETL651S 6" Tank Lid w/Unvented 2" Plug w/Gasket Santoprene 1 $14.25

TL651E 6" Tank Lid w/Unvented 2" Plug w/Gasket EPDM 1 $15.49

6" IBC TANK LIDS W/VENTED 2" PLUGPART NO DESCRIPTION GASKET QTY PRICETL652S 6" Tank Lid w/Vented 2" Plug w/Gasket Santoprene 1 $15.15TL652E 6" Tank Lid w/Vented 2" Plug w/Gasket EPDM 1 $16.38

5½" LIDS FOR SPRAY TANKSPART NO DESCRIPTION QTY PRICE

TL600 5½" Non-Vented Tank Lid 1 $8.49

TL600C 5½" Vented Tank Lid 1 $12.12

2" VENTED & NON-VENTED BUNG PLUGSPART NO DESCRIPTION QTY PRICE

231EPA EPA plug with Non-Removable Vent 1 $7.08231MPT 2" MPT Solid Bung w/EPDM Gasket 1 $6.16231MPTBN 2" MPT Solid Bung w/Buna Nitrile Gasket 1 $6.16TL6531 2" Vented Plug w/EPDM Gasket 1 $12.52

6" EPA TANK LIDS W/VENTED 2" PLUGPART NO DESCRIPTION GASKET QTY PRICE

TL652EPA 6" EPA Tank Lid w/Vented 2" Plug EPDM 1 $19.08

231EPA


1-800-640-2476

IBC/TANK ACCESSORIESIBC/TANK ACCESSORIESIBC Polypropylene Accessories

V20207

DIN60 (Buttress)Thread

DIN60 (Buttress)Thread

60FDIN

201FPT

200CAPSH 200CAP

2" BUTTRESS X 2" MALE NPTPART NO DESCRIPTION GASKET QTY PRICETA283 2" Buttress x 2" Male NPT Threads w/Gasket Santoprene 1 $19.83

2" BUTTRESS X 2" MALE ADAPTERPART NO DESCRIPTION GASKET QTY PRICE

TA283QD 2" Buttress x 2" Male Adapter QDC w/Gasket Santoprene 1 $15.45

2" FEMALE NPT CAPPART NO DESCRIPTION QTY PRICE

201FPT 2" Female NPT Cap 1 $4.30

211FPT 2" Female NPT Cap 1 $4.30

60FDIN 60 MM DIN Cap (Buttress Thread) 1 $4.30

LANYARDPART NO DESCRIPTION QTY PRICE

V20207 11" Polyurethane Lanyard 1 $1.86

2" CAM LEVER DUST CAPPART NO DESCRIPTION QTY PRICE

200CAPSH 2" Cam Lever Dust Cap w/short arms 1 $17.31

200CAP 2" Cam Lever Dust Cap 1 $17.31

202CAP2" CAM LEVER DUST CAP

PART NO DESCRIPTION QTY PRICE201CAPSH 2" Cam Lever Dust Cap w/short arms & rings 1 $17.31

202CAP 2" Cam Lever Dust Cap 1 $12.58

201CAPSH

211FPT


1-800-640-2476

FEATURES• Stainless steel bolts.• Bolt head plugs sealed ultrasonically.• Glass reinforced polypropylene.• EPDM gaskets standard & FKM (viton type) available.

Poly Bolted Tank Flanges

UltrasonicallySealed Bolts inside tank!

BF300

POLY BOLTED TANK FLANGESPART NO DESCRIPTION QTY PRICE

BF075 ¾" x 1" Threaded EPDM Flange 27 $42.04

BF075V ¾" x 1" Threaded FKM (viton type) Flange 27 $82.80

BF100 1" x 1" Threaded EPDM Flange 27 $42.04

BF100V 1" x 1" Threaded FKM (viton type) Flange 27 $56.95

BF125 1¼" x 1" Threaded EPDM Flange 27 $42.04

BF150 1½" x 2" Threaded EPDM Flange 27 $34.48

BF150V 1½" x 2" Threaded FKM (viton type) Flange 27 $114.66


BF200V 2" x 2" Threaded FKM (viton type) Flange 27 $114.66

BF220 2" x 2" Full Port Threaded EPDM Flange 27 $45.10

BF220V 2" x 2" Full Port Threaded FKM (viton type) Flange 27 $114.66


BF300V 3" x 3" Threaded FKM(viton type) Flange 16 $173.28


1-800-640-2476

www.banjocorp.com [email protected] IBC/TANK ACCESSORIESIBC/TANK ACCESSORIESPoly Bolted “Bottom Drain” Tank Flanges

• Allows 100% Rinse Free – No Sediment Build Up!• Excellent for avoiding herbicide cross contamination!• Bolted design for superior strength!• Fits most cone bottom & chemical inductor tanks, 30

gallon sand larger.

Longer boltsAvailable on

page 235! TANK WALL BOTTOM

Foot Gasket (4 ea.)

Full Gasket (1 ea.)

Tank BottomWall

FEATURES• Stainless steel bolts.• Bolt head plugs sealed ultrasonically.• Glass reinforced polypropylene.• EPDM gaskets standard.

FKM (viton type) available.• Longer bolts available.

BF300BD

100% Fully Drainable!

Tank not included

POLY BOTTOM DRAIN BOLTED TANK FLANGESPART NO DESCRIPTION QTY PRICE

BF075BD ¾" x 1" Threaded EPDM Flange 27 $42.04

BF075BDV ¾" x 1" Threaded FKM (viton type) Flange 27 $63.69

BF100BD 1" x 1" Threaded EPDM Flange 27 $42.04

BF100BDV 1" x 1" Threaded FKM (viton type) Flange 27 $63.69

BF125BD 1¼" x 1" Threaded EPDM Flange 27 $42.04

BF125BDV 1¼" x 1" Threaded FKM (viton type) Flange 27 $63.69

BF150BD 1½" x 2" Threaded EPDM Flange 27 $42.04

BF150BDV 1½" x 2" Threaded FKM (viton type) Flange 27 $121.04


BF200BDV 2" x 2" Threaded FKM (viton type) Flange 27 $121.04

BF220BD 2" x 2" Full Port Threaded EPDM Flange 27 $45.10

BF220BDV 2" x 2" Full Port Threaded FKM (viton type) Flange 27 $121.04


BF300BDV 3" x 3" Threaded FKM(viton type) Flange 27 $184.74

Ultrasonically Sealed!

™PATENTED


1-800-640-2476

FEATURES• Double sided female

NPT threads.• Available with EPDM or

FKM (viton type) gasket.

FEATURES• Double sided female

NPT threads.• Standard with EPDM

gasket, FKM (viton type)available.

Bulkhead Tank Fittings

POLY BULKHEAD FITTINGSPART NO DESCRIPTION HOLE SIZE QTY PRICE

TF050 ½" Poly Bulkhead EPDM Tank Fitting 15⁄8" 1 $9.12

TF050V ½" Poly Bulkhead FKM(viton type) Tank Fitting 15⁄8" 1 17.84

TF075 ¾" Poly Bulkhead EPDM Tank Fitting 15⁄8" 1 $9.12

TF075VTF100TF100VTF125TF125V

¾" Poly Bulkhead FKM(viton type) Tank Fitting 15⁄8" 1 $17.84

1" Poly Bulkhead EPDM Tank Fitting 2¼" 1 $10.84

1" Poly Bulkhead FKM(viton type) Tank Fitting 2¼" 1 $23.82

1¼" Poly Bulkhead EPDM Tank Fitting 2¼" 1 $12.62

1¼" Poly Bulkhead FKM(viton type)Tank Fitting 2¼" 1 $23.82

TF150 1½" Poly Bulkhead EPDM Tank Fitting 3" 1 $19.43

TF150V 1½" Poly Bulkhead FKM(viton type)Tank Fitting 3" 1 $29.30

TF200 2" Poly Bulkhead EPDM Tank Fitting 3" 1 $19.43

TF200V 2" Poly Bulkhead FKM(viton type) Tank Fitting 3" 1 $33.12

TF200BSP 2" Poly Bulkhead BSP Tank Fitting 3" 1 $19.43

TF220 2" Poly Bulkhead EPDM Tank FittingTF220V 2" Poly Bulkhead FKM(viton type) Tank FittingTF300 3" Poly Bulkhead EPDM Tank FittingTF300V 3" Poly Bulkhead FKM(viton type) Tank FittingTF300BSP 3" Poly Bulkhead BSP Tank FittingTF400 4" Poly Bulkhead EPDM Tank FittingTF400V 4" Poly Bulkhead FKM(viton type) Tank Fitting

3¼" 1 $24.85

3¼" 1 $60.01

4½" 1 $441.65

4½" 1 $80.58

4½" 1 $42.50

5¾" 1 $113.84

5¾" 1 $188.07

316 SS BULKHEAD FITTINGSPART NO DESCRIPTION HOLE SIZE QTY PRICE

TF038SS 3⁄8" SS Bulkhead Tank Fitting 1" 1 $87.92

TF050SS ½" SS Bulkhead Tank Fitting 13⁄8" 1 $116.51

TF075SS ¾" SS Bulkhead Tank Fitting 15⁄8" 1 $173.36

TF100SS 1" SS Bulkhead Tank FittingTF125SS 1¼" SS Bulkhead Tank Fitting

2¼" 1 $211.01

2¼" 1 $211.01

TF150SS 1½" SS Bulkhead Tank Fitting 3" 1 $265.08

TF200SS 2" SS Bulkhead Tank Fitting 3" 1 $265.08

TF220SS 2" SS Bulkhead Tank Fitting 3¼" 1 $279.80

TF300SS 3" SS Bulkhead Tank Fitting 43⁄8" 1 $428.70


1-800-640-2476

CAM

LEVE

R COU

PLIN

GS

3 ARMS

E

FEATURES• Stainless steel rings, arms & pins.• Most complete line of polypropylene couplings available.• Versatile — interchangeable with all types of cam lever couplers.• Precision molded — insures a uniform and accurate fit.• Durable — Polypropylene is glass reinforced for rugged strength and durability.• Smooth operating — finger rings are designed for easy opening of cam levers.• Complete series of ½", ¾", 1", 1¼", 1½", 2", 3" and 4" NPT thread.• BSP threads available 1"- 3" sizes (excluding 1¼").• Operating conditions:

– 3/8" thru 2" — 100 P.S.I. at 0°F; 125 P.S.I. at 70°F; 70 P.S.I. at 150°F.– 2½", 3" & 4" Cap-50 P.S.I.; Couplings 75 P.S.I. max.

• Economical and superior in performance.• Standard with EPDM gaskets. Buna “N”, and FKM (viton type) also available.

Polypropylene Cam Lever Couplings

A B C D

F PL CAP

NOTE: *¼", 3/8" and ½" series couplings interchange with ¾" size couplings. Coupling ends are ¾" size.**1¼" series couplings interchange with 1" size couplings. Coupling ends are 1" size.***1½" x 1¼" couplings interchange with 1½" size couplings. Coupling ends are 1½" size.

WARNING: Couplings should not be disconnected under pressure or with liquid in the line.

303B & 303C & All 4" Couplings

have 3 Arms for POSITIVE SEAL!

CAM LEVER COUPLINGSITEM DESCRIPTION ¼" * 3⁄8" * ½" * ¾" 1" 1¼" ** 1½" x 1¼"

*** 1½" 2" 2½" 3" 3" 3 ARMS 4" 3 ARMS

A Male Adapter-Female Thread 75A1/4 75A3/8 75A1/2 75A3/4 100A 125A 150125A 150A 200A 300A 400AB Female Coupler- Male Thread 75B1/2 75B3/4 100B 125B 150125B 150B 200B 300B 303B 400BC Female Coupler-Hose Shank 050C 075C 100C 125C 150125C 150C 200C 300C 303C 400CD Female Coupler-Female Thread 075D3/8 050D 075D 100D 125D 150125D 150D 200D 300D 400DE Male Adapter-Hose Shank 050E 075E 100E 125E 150125E 150E 200E 300E 400EF Male Adapter-Male Thread 050F 075F 100F 125F 150125F 150F 200F 300F 400F

PL Plug for Female Coupler 75PL 75PL 100125PL 100125PL 150PL 150PL 200PL 250PL 300PL 400PL

CAP Cap for Male Adapter 075CAP 075CAP 100125CAP 100125CAP 150CAP 150CAP 200CAP 250CAP 300CAP 400CAP(2 arms)

CAPSH Cap w/Short Arms 200CAPSH


1-800-640-2476

www.banjocorp.com [email protected] CAM LEVER COUPLINGSCAM LEVER COUPLINGS

NOTE: ½" couplings interchange with ¾" couplings. Banjo 1¼" Couplers & Adapters will interchange with 1" Couplings.

Only the Threads and Barbs are 1¼".

½" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX

PSI GASKET QTY PRICE

75A1/2 ¾" Male Adapter-½" Female Thread 125 N/A 10/bag $4.61

75B1/2 ¾" Female Coupler-½" Male Thread 125 EPDM 10/bag $10.55

050C ¾" Female Coupler-½" Hose Shank 125 EPDM 10/bag $10.55

050D ¾" Female Coupler-½" FemaleThread 125 EPDM 10/bag $10.55

050E ¾" Male Adapter-½" Hose Shank 125 N/A 10/bag $4.98

050F ¾" Male Adapter-½" Male Thread 125 N/A 10/bag $4.98

075CAP ¾" Cap-Male Adapter 125 EPDM 10/bag $10.55

75PL ¾" Plug-Female Coupler 125 N/A 10/bag $4.98

¾" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


75A3/4 ¾" Male Adapter-¾" Female Thread 125 N/A 10/bag $4.61

75B3/4 ¾" Female Coupler-¾" Male Thread 125 EPDM 10/bag $10.55

075C ¾" Female Coupler-¾" Hose Shank 125 EPDM 10/bag $10.55

075D ¾" Female Coupler-¾" FemaleThread 125 EPDM 10/bag $10.55

075E ¾" Male Adapter-¾" Hose Shank 125 N/A 10/bag $4.98

075F ¾" Male Adapter-¾" Male Thread 125 N/A 10/bag $4.98

075CAP ¾" Cap-Male Adapter 125 EPDM 10/bag $10.55

75PL ¾" Plug-Female Coupler 125 N/A 10/bag $4.98

1" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


100A 1" Male Adapter-1" Female Thread 125 N/A 10/bag $4.61

100B 1" Female Coupler-1" Male Thread 125 EPDM 10/bag $12.12

100C 1" Female Coupler-1" Hose Shank 125 EPDM 10/bag $12.12

100D 1" Female Coupler-1" FemaleThread 125 EPDM 10/bag $12.12

100E 1" Male Adapter-1" Hose Shank 125 N/A 10/bag $5.54

100F 1" Male Adapter-1" Male Thread 125 N/A 10/bag $5.54

100125CAP 1" Cap-Male Adapter 125 EPDM 10/bag $11.64

100125PL 1" Plug-Female Coupler 125 N/A 10/bag $4.80

¾" x ¼" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


75A1/4 ¾" Male Adapter-¼" Female Thread 125 N/A 10/bag $4.61

¾" x 3⁄8" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


75A3/8 ¾" Male Adapter-3⁄8" Female Thread 125 N/A 10/bag $4.61075D3/8 ¾" Female Coupler-3⁄8" FemaleThread 125 N/A 10/bag $10.55

1" x 1¼" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


125A 1" Male Adapter-1¼" Female Thread 125 N/A 10/bag $5.43125B 1" Female Coupler-1¼" Male Thread 125 EPDM 10/bag $12.12

125C 1" Female Coupler-1¼" Hose Shank 125 EPDM 10/bag $12.12

125D 1" Female Coupler-1¼" FemaleThread 125 EPDM 10/bag $12.12

125E 1" Male Adapter-1¼" Hose Shank 125 N/A 10/bag $5.54

125F 1" Male Adapter-1¼" Male Thread 125 N/A 10/bag $5.54

100125CAP 1" Cap-Male Adapter 125 EPDM 10/bag $11.64


1½" x 1¼" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


150125A150125B150125C150125D

1½" Male Adapter-1¼" Female Thread 125 N/A 10/bag $5.24

1½" Female Coupler-1¼" Male Thread 125 EPDM 1 $14.22

1½" Female Coupler-1¼" Hose Shank 125 EPDM 1 $14.22

1½" Female Coupler-1¼" FemaleThread 125 EPDM 1 $14.22

150125E 1½" Male Adapter-1¼" Hose Shank 125 N/A 10/bag $5.55

150125F 1½" Male Adapter-1¼" Male Thread 125 N/A 10/bag $5.55

150CAP 1½" Cap-Male Adapter 125 EPDM 1 $14.22

150PL 1½" Plug-Female Coupler 125 N/A 10/bag $5.36

NOTE: 1½" x 1¼" couplings interchange with 1½" size couplings. Coupling and Adapter ends are 1½" size. Only the threads and barbs are 1¼".

1½" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


150A150B150C150D

1½" Male Adapter-1½" Female Thread 125 N/A 10/bag $5.24

1½" Female Coupler-1½" Male Thread 125 EPDM 1 $14.22

1½" Female Coupler-1½" Hose Shank 125 EPDM 1 $14.22

1½" Female Coupler-1½" FemaleThread 125 EPDM 1 $14.22

150E 1½" Male Adapter-1½" Hose Shank 125 N/A 10/bag $5.55

150F 1½" Male Adapter-1½" Male Thread 125 N/A 10/bag 5.55


150PL 1½" Plug-Female Coupler 125 N/A 10/bag $5.36



200A 2" Male Adapter-2" Female Thread 125 N/A 10/bag $6.17

200B 2" Female Coupler-2" Male Thread 125 EPDM 1 $17.31

201B 2" Female Coupler-2" Extended Male Thread 125 EPDM 1 $17.31200C 2" Female Coupler-2" Hose Shank 125 EPDM 1 $17.31

200D 2" Female Coupler-2" FemaleThread 125 EPDM 1 $17.31

200E 2" Male Adapter-2" Hose Shank 125 N/A 10/bag $7.30

200F 2" Male Adapter-2" Male Thread 125 N/A 10/bag $7.30

200CAP 2" Cap-Male Adapter 125 EPDM 1 $17.31

200CAPSH 2" Cap-Male Adapter w/Short Arms 125 EPDM 1 $17.31


2½" POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX



250PL 2½" Plug-Female Coupler 75 N/A 1 $20.41


1-800-640-2476

A B C D

E F CAP PLUG

SPOOL ADAPTERSPART NO DESCRIPTION MAX


200FF 2" Male Adapter-2" Male Adapter 125 N/A 10/bag $19.04

300F200F 3" Male Adapter-2" Male Adapter 125 N/A 1 $38.11

300FF 3" Male Adapter-3" Male Adapter 125 N/A 1 $38.11



300A 3" Male Adapter-3" Female Thread 75 N/A 1 $14.93


303B 3" Female Coupler-3" Extended Male Thread 75 EPDM 1 $37.33

300C 3" Female Coupler-3" Hose Shank 75 EPDM 1 $29.10

303C 3" Female Coupler w/3 Arms-3" Hose Shank 75 EPDM 1 $37.33

300D 3" Female Coupler-3" Female Thread 75 EPDM 1 $29.10

300E 3" Male Adapter-3" Hose Shank 75 N/A 1 $19.13

300F 3" Male Adapter-3" Male Thread 75 N/A 1 $19.13

300CAP 3" Cap-Male Adapter 50 EPDM 1 $29.10

300PL 3" Plug-Female Coupler 75 N/A 1 $15.17

4" w/3 ARMS POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


400A 4" Male Adapter-4" Female Thread 75 N/A 1 $22.78


400C 4" Female Coupler-4" Hose Shank 75 EPDM 1 $57.67

400D 4" Female Coupler-4" Female Thread 75 EPDM 1 $57.67

400E 4" Male Adapter-4" Hose Shank 75 N/A 1 $22.78

400F 4" Male Adapter-4" Male Thread 75 N/A 1 $22.78

400CAP 4" Cap-Male Adapter (w/2 arms) 50 EPDM 1 $42.06

400PL 4" Plug-Female Coupler 75 N/A 1 $17.90

REPLACEMENT PARTS POLY CAM ARM W/RINGPART NO DESCRIPTION QTY PRICE

75K ½" & ¾" SS Cam Arm w/Ring 1 $3.18

100K 1" & 1¼" SS Cam Arm w/Ring 1 $3.00

150(200)K 1½" & 2" SS Cam Arm w/Ring 1 $3.92

300K 3" SS Cam Arm w/Ring 1 $5.55

REPLACEMENT PARTS POLY COUPLING PINS & RINGSPART NO DESCRIPTION QTY PRICE

75P ½" & ¾" Pin 1 $0.72

100P 1" & 1¼" Pin 1 $0.72

200P 1½" & 2" Pin 1 $0.88

300P 3" & 4" Pin 1 $1.74

100RING ½", ¾", 1" & 1¼" Ring 1 $0.59

150RING 1½", 2" & 3" Ring 1 $0.69

POLY CAM LEVER COUPLINGSPART NO DESCRIPTION PSI

MAX GASKET QTY PRICE



3" Female Coupler w/3 Arms-3" Hose Shank 75 1 $37.33

PART NO DESCRIPTION PSIMAX GASKET QTY PRICE

303B200A 3" Female Coupler w/3 Arms-2" Male Adapter 75 EPDM 1 $51.98


1-800-640-2476

F

DC

Polypropylene Switch-a-Roos

FEATURES• Precision molded in polypropylene, reinforced with fiberglass for

strength and durability.• Stainless steel rings, cam levers and pins resist corrosion.• Banjo 90° angle couplings and adapters will reduce the

number of elbows and other pipe fittings used in plumbingapplications.

F

Spray Tip

Switch-A-Roo(Male Adapter) 75A

Cam Lever Coupling75B

Available with ¼", 3/8", ½", ¾"Female Threads

¾" Male Adapter

Self-Aligning Knurl

¾" Female Coupler

WARNING: Couplings should not be disconnected under pressure or with liquid in the line.

Self Aligning Groove

1½" & 2" Polypropylene 90° Couplings

FEATURES• The Switch-A-Roo is a fast, convenient method of changing

spray nozzles on fertilizer application equipment.• Precision molded in polypropylene (fiberglass reinforced) for

high strength and toughness.• The female coupling is available in either ½" or ¾" pipe

thread and normally mounted on the spray boom.• The male adapter is available in four different thread sizes ¼",

3⁄8", ½", and ¾" to fit all size spray nozzles.• Switch-A-Roo’s available with self-aligning grooves.

1½" 90° POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


150A90150C90150D90150F90

1½" 90° Male Adapter-1½" Female Thread 125 EPDM 1 $8.27

1½" 90° Female Coupler-1½" Hose Shank 125 EPDM 1 $17.03

1½" 90° Female Coupler-1½" Female Thread 125 EPDM 1 $17.03

1½" 90° Male Adapter-1½" Male Thread 125 EPDM 1 $9.91

2" 45° POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


200F45 2" 45° Male Adapter-2" Male Thread 125 N/A 10/bag $16.65

2" 90° POLY CAM LEVER COUPLINGSPART NO DESCRIPTION MAX


200A90 2" 90° Male Adapter-2" Female Thread 125 EPDM 1 $9.43

200B90 2" 90° Female Coupler-2" Male Thread 125 EPDM 1 $21.13

200C90 2" 90° Female Coupler-2" Hose Shank 125 EPDM 1 $21.13

200D90 2" 90° Female Coupler-2" Female Thread 125 EPDM 1 $21.13

200F90 2" 90° Male Adapter-2" Male Thread 125 EPDM 1 $10.63

220FSWP90 2" Male Adapter w/90° Sweep -2" Male Thread 125 EPDM 1 $38.89

45°2" Polypropylene 45° Couplings

POLY SWITCH-A-ROOSPART NO DESCRIPTION QTY PRICE

75A1/4/SA ¾" Male Adapter-¼" w/Self-aligning Groove 10/bag $4.61

75A3/8/SA ¾" Male Adapter-3⁄8" w/Self-aligning Groove 10/bag $4.61

75A1/2/SA ¾" Male Adapter-½" w/Self-aligning Groove 10/bag $4.61

75A3/4/SA ¾" Male Adapter-¾" w/Self-aligning Groove 10/bag $4.61

75B1/2 ¾" Female Coupler-½" Male Thread 10/bag $10.55

75B3/4 ¾" Female Coupler-¾" Male Thread 10/bag $10.55

BA

FSWP


1-800-640-2476

www.banjocorp.com PIPE FITTINGSPIPE FITTINGSFEATURES• Glass reinforced polypropylene.• Heavy duty (Schedule 80).• Lightweight with excellent strength.• NPT threads.• Excellent chemical resistance.• Pressure to 150 P.S.I. at 70°F.

POLY NIPPLESPART NO DESCRIPTION QTY PRICE

NIP025-SH ¼" Short Poly Nipple 10/bag $1.04

NIP038-SH 3⁄8" Short Poly Nipple 10/bag $1.04

NIP050-SH ½" Short Poly Nipple 10/bag $1.17

NIP050-3 ½" x 3" Poly Nipple 10/bag $2.22

NIP075-SH ¾" Short Poly Nipple 10/bag $1.21

NIP075-4 ¾" x 4" Poly Nipple 10/bag $2.32

NIP075-6 ¾" x 6" Poly Nipple 10/bag $2.72

NIP100-SH 1" Short Poly Nipple 10/bag $1.73

NIP100-4 1" x 4" Poly Nipple 10/bag $2.46


NIP125-SH 1¼" Short Poly Nipple 10/bag $1.73

NIP125-4 1¼" x 4" Poly Nipple 10/bag $3.06

NIP125-6 1¼" x 6" Poly Nipple 10/bag $3.48

NIP150-SH 1½" Short Poly Nipple 10/bag $3.18

NIP150-3 1½" x 3" Poly Nipple 10/bag $3.93




NIP200-SH 2" Short Poly Nipple 10/bag $3.61



NIP300-SH 3" Short Poly Nipple 1 $11.33

NIP300-4 3" x 4" Poly Nipple 1 $17.03

NIP300-6 3" x 6" Poly Nipple 1 $21.96

NIP400-SH 4" Short Poly Nipple 1 $16.64

POLY PIPE COUPLINGSPART NO DESCRIPTION QTY PRICE

CPLG025 ¼" Poly Pipe Coupling 10/bag $3.16

CPLG038 3⁄8" Poly Pipe Coupling 10/bag $3.56

CPLG050 ½" Poly Pipe Coupling 10/bag $3.56

CPLG075 ¾" Poly Pipe Coupling 10/bag $3.56

CPLG100 1" Poly Pipe Coupling 10/bag $4.04

CPLG125 1¼" Poly Pipe Coupling 10/bag $5.45

CPLG150 1½" Poly Pipe Coupling 10/bag $9.07

CPLG200 2" Poly Pipe Coupling 10/bag $10.35

CPLG300 3" Poly Pipe Coupling 1 $29.29

POLY REDUCING COUPLINGSPART NO DESCRIPTION QTY PRICE

RC100-075 1" x ¾" Poly Reducing Coupling 10/bag $5.27

RC150-100 1½" x 1" Poly Reducing Coupling 10/bag $8.97

RC150-125 1½" x1¼" Poly Reducing Coupling 10/bag $8.95

RC200-050 2" x ½" Poly Reducing Coupling 10/bag $9.51

RC200-100 2" x 1" Poly Reducing Coupling 10/bag $9.51

RC200-125 2" x 1¼" Poly Reducing Coupling 10/bag $9.51

RC200-150 2" x 1½" Poly Reducing Coupling 10/bag $9.51

RC300-200 3" x 2" Poly Reducing Coupling 1 $33.76

POLY REDUCING NIPPLESPART NO DESCRIPTION QTY PRICE

RN050-038 ½" x 3⁄8" Poly Reducing Nipple 10/bag $1.76

RN075-050 ¾" x ½" Poly Reducing Nipple 10/bag $1.89

RN100-050 1" x ½" Poly Reducing Nipple 10/bag $2.43

RN100-075 1" x ¾" Poly Reducing Nipple 10/bag $2.22

RN125-075 1¼" x ¾" Poly Reducing Nipple 10/bag $2.56

RN125-100 1¼" x 1" Poly Reducing Nipple 10/bag $2.32

RN150-100 1½" x 1" Poly Reducing Nipple 10/bag $2.75

RN150-125 1½" x1¼" Poly Reducing Nipple 10/bag $2.46

RN200-125 2" x 1¼" Poly Reducing Nipple 10/bag $3.37

RN200-150 2" x 1½" Poly Reducing Nipple 10/bag $2.73

RN300-200 3" x 2" Poly Reducing Nipple 1 $11.28

POLY REDUCING BUSHINGPART NO DESCRIPTION QTY PRICE

RB038-025 3⁄8" MPT x ¼" FPT Reducing Bushing 10/bag $2.32

RB050-018 ½" MPT x 1⁄8" FPT Reducing Bushing 10/bag $2.32

RB050-025 ½" MPT x ¼" FPT Reducing Bushing 10/bag $2.32

RB050-038 ½" MPT x 3⁄8" FPT Reducing Bushing 10/bag $2.32

RB075-018 ¾" MPT x 1⁄8" FPT Reducing Bushing 10/bag $2.32

RB075-025 ¾" MPT x ¼" FPT Reducing Bushing 10/bag $2.32

RB075-038 ¾" MPT x 3⁄8" FPT Reducing Bushing 10/bag $2.32

RB075-050 ¾" MPT x ½" FPT Reducing Bushing 10/bag $2.32

RB100-018 1" MPT x 1⁄8" FPT Reducing Bushing 10/bag $2.46

RB100-025 1" MPT x ¼" FPT Reducing Bushing 10/bag $2.46

RB100-050 1" MPT x ½" FPT Reducing Bushing 10/bag $2.46

RB100-075 1" MPT x ¾" FPT Reducing Bushing 10/bag $2.46

RB125-038 1¼" MPT x 3⁄8" FPT Reducing Bushing 10/bag $2.46

RB125-075 1¼" MPT x ¾" FPT Reducing Bushing 10/bag $2.46

RB125-100 1¼" MPT x 1" FPT Reducing Bushing 10/bag $2.46

RB150-075 1½" MPT x ¾" FPT Reducing Bushing 10/bag $3.26

RB150-100 1½" MPT x 1" FPT Reducing Bushing 10/bag $3.26

RB150-125 1½" MPT x1¼" FPT Reducing Bushing 10/bag $3.26

RB200-075 2" MPT x ¾" FPT Reducing Bushing 10/bag $3.56

RB200-100 2" MPT x 1" FPT Reducing Bushing 10/bag $3.56

RB200-125 2" MPT x 1¼" FPT Reducing Bushing 10/bag $3.56

RB200-150 2" MPT x 1½" FPT Reducing Bushing 10/bag $3.56

RB300-150 3" MPT x 1½" FPT Reducing Bushing 1 $14.81

RB300-200 3" MPT x 2" FPT Reducing Bushing 1 $14.81

RB400-300 4" MPT x 3" FPT Reducing Bushing 1 $22.97

Please order in bag/box quantities for quick and easy shipping /receiving of your order. Use BANJO Part Numbers when ordering.

All items priced each, not per bag or box quantity.


1-800-640-2476

Polypropylene Pipe Fittings

POLY CROSSESPART NO DESCRIPTION QTY PRICE

CR025 ¼" Poly Cross 10/bag $10.14

CR038 3⁄8" Poly Cross 10/bag $11.13

CR050 ½" Poly Cross 5/bag $15.81

CR075 ¾" Poly Cross 5/bag $15.81

CR100 1" Poly Cross 5/bag $15.81

CR125 1¼" Poly Cross 1 $23.57

CR150 1½" Poly Cross 1 $23.57

CR200 2" Poly Cross 1 $28.85

POLY TEESPART NO DESCRIPTION QTY PRICE

TEE025 ¼" Poly Tee 10/bag $3.32

TEE038 3⁄8" Poly Tee 10/bag $3.43

TEE050 ½" Poly Tee 10/bag $3.43

TEE075 ¾" Poly Tee 10/bag $3.87

TEE100 1" Poly Tee 10/bag $5.59

TEE125 1¼" Poly Tee 10/bag $6.45

TEE150 1½" Poly Tee 1 $9.24

TEE200 2" Poly Tee 1 $11.52

TEE300 3" Poly Tee 1 $54.91

POLY GAUGE TEE (GAUGE NOT INCLUDED)PART NO DESCRIPTION QTY PRICE

TEG075 ¾" Poly Tee w/ ¼" Female Thread 10/bag $15.67

TEG100 1" Poly Tee w/ ¼" Female Thread 10/bag $15.67

POLY PIPE PLUGSPART NO DESCRIPTION QTY PRICE

PLUG025 ¼" Poly Pipe Plug 10/bag $1.98

PLUG038 3⁄8" Poly Pipe Plug 10/bag $2.13

PLUG050 ½" Poly Pipe Plug 10/bag $2.46

PLUG075 ¾" Poly Pipe Plug 10/bag $2.46

PLUG100 1" Poly Pipe Plug 10/bag $2.46

PLUG125 1¼" Poly Pipe Plug 10/bag $2.46

PLUG150 1½" Poly Pipe Plug 10/bag $3.93

PLUG200 2" Poly Pipe Plug 10/bag $3.93

PLUG300 3" Poly Pipe Plug 1 $15.51

POLY PIPE CAPSPART NO DESCRIPTION QTY PRICE

CAP025 ¼" Poly Pipe Cap 10/bag $2.13

CAP038 3⁄8" Poly Pipe Cap 10/bag $2.27

CAP050 ½" Poly Pipe Cap 10/bag $4.77

CAP075 ¾" Poly Pipe Cap 10/bag $4.77

CAP100 1" Poly Pipe Cap 10/bag $4.77

CAP125 1¼" Poly Pipe Cap 10/bag $5.36

CAP150 1½" Poly Pipe Cap 10/bag $6.75

CAP200 2" Poly Pipe Cap 10/bag $7.84

CAP300 3" Poly Pipe Cap 1 $28.06

• Glass reinforced polypropylene.• Heavy duty (Schedule 80).• Lightweight with excellent strength.• NPT threads.• Excellent chemical resistance.• Pressure to 150 P.S.I. at 70°F.

POLY CROSSESPART NO DESCRIPTION QTY PRICE

HBC050075 ½" x ¾" Hose Barb Cross 1 $15.81


1-800-640-2476

www.banjocorp.com [email protected] PIPE FITTINGSPIPE FITTINGS

90° POLY ELBOWSPART NO DESCRIPTION QTY PRICE

EL025-90 ¼" 90° Poly Elbow 10/bag $2.77

EL038-90 3⁄8" 90° Poly Elbow 10/bag $3.44

EL050-90 ½" 90° Poly Elbow 10/bag $3.11

EL075-90 ¾" 90° Poly Elbow 10/bag $3.37

EL100-90 1" 90° Poly Elbow 10/bag $3.97

EL125-90 1¼" 90° Poly Elbow 10/bag $4.96

EL150-90 1½" 90° Poly Elbow 10/bag $7.79

EL200-90 2" 90° Poly Elbow 1 $9.24

EL300-90 3" 90° Poly Elbow 1 $47.05

90° POLY STREET ELBOWSPART NO DESCRIPTION QTY PRICE

SL025-90 ¼" 90° Poly Street Elbow 10/bag $2.77

SL038-90 3⁄8" 90° Poly Street Elbow 10/bag $3.26

SL050-90 ½" 90° Poly Street Elbow 10/bag $3.26

SL075-90 ¾" 90° Poly Street Elbow 10/bag $3.48

SL100-90 1" 90° Poly Street Elbow 10/bag $4.12

SL125-90 1¼" 90° Poly Street Elbow 10/bag $5.15

SL150-90 1½" 90° Poly Street Elbow 10/bag $8.03

SL200-90 2" 90° Poly Street Elbow 1 $9.53


45° POLY STREET ELBOWSPART NO DESCRIPTION QTY PRICE

SL075-45 ¾" 45° Poly Street Elbow 10/bag $5.61

SL100-45 1" 45° Poly Street Elbow 10/bag $8.21

SL125-45 1¼" 45° Poly Street Elbow 10/bag $10.17

SL150-45 1½" 45° Poly Street Elbow 10/bag $10.86



45° POLY ELBOWPART NO DESCRIPTION QTY PRICE

EL100-45 1" 45° Poly Street Elbow 10/bag $10.71

90° POLY HOSE BARB ELBOWPART NO DESCRIPTION QTY PRICE

HBEL100-90 1" 90° Poly Hose Barb Elbow 10/bag $1.98


HBB20012590 2" x 1¼" 90° Poly Hose Barb Elbow 10/bag $11.79


HBEL150/100-90 1½" x 1" 90° Poly Hose Barb Elbow 1 $18.08


1-800-640-2476

316 SS HOSE BARBSPART NO DESCRIPTION QTY PRICE

HB025SS ¼" Male Thread x ¼" Hose Shank 1 $13.26

HB025-038SS ¼" Male Thread x 3⁄8" Hose Shank 1 $13.26

HB025-050SS ¼" Male Thread x ½" Hose Shank 1 $13.26

HB038SS 3⁄8" Male Thread x 3⁄8" Hose Shank 1 $13.26

HB038-050SS 3⁄8" Male Thread x ½" Hose Shank 1 $14.92

HB050SS ½" Male Thread x ½" Hose Shank 1 $16.60

HB050-058SS ½" Male Thread x 5⁄8" Hose Shank 1 $19.40

HB050-075SS ½" Male Thread x ¾" Hose Shank 1 $19.40

HB075-050SS ¾" Male Thread x ½" Hose Shank 1 $19.40

HB075SS ¾" Male Thread x ¾" Hose Shank 1 $19.40

HB075-100SS ¾" Male Thread x 1" Hose Shank 1 $27.13

HB100-075SS 1" Male Thread x ¾" Hose Shank 1 $27.13

HB100SS 1" Male Thread x 1" Hose Shank 1 $27.13

HB125SS 1¼" Male Thread x 1¼" Hose Shank 1 $40.66

HB150SS 1½" Male Thread x 1½" Hose Shank 1 $42.14



POLY 90° HOSE BARBSPART NO DESCRIPTION QTY PRICE

HB025-90 ¼" Male Thread x ¼" 90° Hose Barb 10/bag $1.18

HB025/038-90 ¼" Male Thread x 3⁄8" 90° Hose Barb 10/bag $1.18

HB025/050-90 ¼" Male Thread x ½" 90° Hose Barb 10/bag $1.18

HB038-90 3⁄8" Male Thread x 3⁄8" 90° Hose Barb 10/bag $1.18

HB050/038-90 ½" Male Thread x 3⁄8" 90° Hose Barb 10/bag $1.18

HB050-90 ½" Male Thread x ½" 90° Hose Barb 10/bag $1.18

HB050/075-90 ½" Male Thread x ¾" 90° Hose Barb 10/bag $1.18

HB075/050-90 ¾" Male Thread x ½" 90° Hose Barb 10/bag $1.48

HB075-90 ¾" Male Thread x ¾" 90° Hose Barb 10/bag $1.48

HB075/100-90 ¾" Male Thread x 1" 90° Hose Barb 10/bag $1.48

HB100/075-90 1" Male Thread x ¾" 90° Hose Barb 10/bag $1.91

HB100-90 1" Male Thread x 1" 90° Hose Barb 10/bag $1.91

HB100/125-90 1" Male Thread x 1¼" 90° Hose Barb 10/bag $2.34

HB125/100-90 1¼" Male Thread x 1" 90° Hose Barb 10/bag $2.34

HB125-90 1¼" Male Thread x 1¼" 90° Hose Barb 10/bag $2.34

HB125/150-90 1¼" Male Thread x 1½" 90° Hose Barb 10/bag $6.75

HB150/125-90 1½" Male Thread x 1¼" 90° Hose Barb 10/bag $6.75

HB150-90 1½" Male Thread x 1½" 90° Hose Barb 10/bag $6.75

HB200/150-90 2" Male Thread x 1½" 90° Hose Barb 10/bag $7.40

HB200-90 2" Male Thread x 2" 90° Hose Barb 10/bag $7.40

HB300-90 3" Male Thread x 3" 90° Hose Barb 1 $35.77

POLY STRAIGHT HOSE BARBSPART NO DESCRIPTION QTY PRICE

HB025 ¼" Male Thread x ¼" Hose Barb 10/bag $0.99

HB025-038 ¼" Male Thread x 3⁄8" Hose Barb 10/bag $.099

HB025-050 ¼" Male Thread x ½" Hose Barb 10/bag $1.18

HB038 3⁄8" Male Thread x 3⁄8" Hose Barb 10/bag $1.06

HB038-025 3⁄8" Male Thread x ¼" Hose Barb 10/bag $1.06

HB038-050 3⁄8" Male Thread x ½" Hose Barb 10/bag $1.06

HB050-025 ½" Male Thread x ¼" Hose Barb 10/bag $1.06

HB050-038 ½" Male Thread x 3⁄8" Hose Barb 10/bag $1.06

HB050 ½" Male Thread x ½" Hose Barb 10/bag $1.06

HB050-075 ½" Male Thread x ¾" Hose Barb 10/bag $1.18

HB075-038 ¾" Male Thread x 3⁄8" Hose Barb 10/bag $1.18

HB075-050 ¾" Male Thread x ½" Hose Barb 10/bag $1.18

HB075-058 ¾" Male Thread x 5⁄8" Hose Barb 10/bag $1.45

HB075 ¾" Male Thread x ¾" Hose Barb 10/bag $1.18

HB075-100 ¾" Male Thread x 1" Hose Barb 10/bag $1.45

HB100-075 1" Male Thread x ¾" Hose Barb 10/bag $1.45

HB100 1" Male Thread x 1" Hose Barb 10/bag $1.45

HB100-125 1" Male Thread x 1¼" Hose Barb 10/bag $1.78

HB125-075 1¼" Male Thread x ¾" Hose Barb 10/bag $1.78

HB125-100 1¼" Male Thread x 1" Hose Barb 10/bag $1.78

HB125 1¼" Male Thread x 1¼" Hose Barb 10/bag $1.78

HB125-150 1¼" Male Thread x 1½" Hose Barb 10/bag $3.40

HB150-100 1½" Male Thread x 1" Hose Barb 10/bag $2.66

HB150-125 1½" Male Thread x 1¼" Hose Barb 10/bag $2.66

HB150 1½" Male Thread x 1½" Hose Barb 10/bag $2.66

HB150-200 1½" Male Thread x 2" Hose Barb 10/bag $4.58

HB200-150 2" Male Thread x 1½" Hose Barb 10/bag $4.58

HB200 2" Male Thread x 2" Hose Barb 10/bag $3.64

HB300 3" Male Thread x 3" Hose Barb 1 $11.78

HB400 4" Male Thread x 4" Hose Barb 1 $24.69

POLY FEMALE HOSE BARBSPART NO DESCRIPTION QTY PRICE

HBF075 ¾" Female Thread 10/bag $2.91

HBF075-100 ¾" Female Thread x 1" Hose Shank 10/bag $2.91

HBF100 1" Female Thread x 1" Hose Shank 10/bag $2.04

Polypropylene Pipe Fittings


1-800-640-2476

PIPE FITTINGSPIPE FITTINGS

POLY SWIVELPART NO DESCRIPTION MAX

PSI QTY PRICE

SW100 1" Male x 1" Female Swivel 75 1 $14.11

SW150 1½" Male x 1½" Female Swivel 75 1 $17.27

SW200 2" Male x 2" Female Swivel 75 1 $19.36

SW220 2" Full Port Male x 2" Full Port Female Swivel 75 1 $32.23

8 STATION POLY MANIFOLDPART NO DESCRIPTION QTY PRICE

TM075/050 8 Station Manifold ¾" Inlet x ½" Outlet, ¼" Gauge Port 1 $28.84

POLY HOSE BARB THREADED TEESPART NO DESCRIPTION QTY PRICE

HBT100-100 1" Hose Barb x 1" Hose Barb x 1" Male Thread Hose BarbTee 1 $6.55

HBT150-100 1½" Hose Barb x 1½" Hose Barb x 1" Male Thread Hose Barb Tee 1 $18.08

HBT150-150 1½" Hose Barb x 1½" Hose Barb x1½" Male Thread Hose Barb Tee 1 $40.78

POLY HOSE BARB TEESPART NO DESCRIPTION QTY PRICE

HBT025 ¼" Hose Barb Tee 10/bag $1.58HBT038 3⁄8" Hose Barb Tee 10/bag $1.58HBT050-038 ½" x ½" x 3⁄8" Hose Barb Tee 10/bag $2.05HBT050 ½" Hose Barb Tee 10/bag $2.05HBT050-075 ½" x ½" x ¾" Hose Barb Tee 10/bag $2.05HBT075-050 ¾" x ¾" x ½" Hose Barb Tee 10/bag $2.05HBT075 ¾" Hose Barb Tee 10/bag $2.05HBT075-100 ¾" x ¾" x 1" Hose Barb Tee 10/bag $2.05HBT100-075 1" x 1" x ¾" Hose Barb Tee 10/bag $2.16HBT100 1" Hose Barb Tee 10/bag $2.16HBT200 2" Hose Barb Tee 1 $9.01HBT300 3" Hose Barb Tee 1 $25.05

POLY HOSE MENDERSPART NO DESCRIPTION QTY PRICE

HM025 ¼" x ¼" Hose Barb 10/bag $1.09HM038 3⁄8" x 3⁄8" Hose Barb 10/bag $1.09HM050 ½" x ½" Hose Barb 10/bag $1.12HM075 ¾" x ¾" Hose Barb 10/bag $1.22HM100 1" x 1" Hose Barb 10/bag $1.49HM125 1¼" x 1¼" Hose Barb 10/bag $1.68HM150 1½" x 1½" Hose Barb 10/bag $2.98

HM200 2" x 2" Hose Barb 10/bag $3.74

HM300 3" x 3" Hose Barb 1 $11.69

PIPE SEALANTPART NO DESCRIPTION QTY PRICE

RS21 RECTORSEAL® No. 21™ (8 oz-24/case) 1 can $27.54

RSTB RECTORSEAL® TRU-BLU™ (8 oz-24/case) 1 can $26.05

RSTB-2 RECTORSEAL® TRU-BLU™ w/TFE (2 oz) 1 tube $8.56

Recommended procedure for sealing pipe threads:We DO NOT recommend using pipe tape. Pipe tape enlarges the outside diameter of the male thread and may cause the female thread to split.

We recommend using a pipe thread sealant. Use on clean tapered threads. Apply a thick even coat on male threads using brush applicator. For pipe diameters smaller than 1¼" apply to male threads only. For 1¼" and larger sizes apply to both male and female threads. Avoid applying excessive amounts. Hand tighten joints and then torque another ½ to ¾ turn until threads seal. RECTORSEAL® No. 21™: This is a slow drying, soft set multi-purpose sealant designed for use where black is preferred. 8 oz. can with brush in the cap. Conforms to TT-S-1732. RECTORSEAL® TRU-BLU™: This is a fast drying, flexible set thread sealant designed for high vibration environments. Teflon®* has been added to enhance thread lubrication during assembly and break out. 8 oz. can with brush in the cap. Conforms to TT-S-1732.

NOTE: All recommendations as to use of parts and materials mentioned in this catalog assume that the buyer will ascertain their suitability and that all safety and health standards are met.*DuPont Registered Trademark

NEW Full Port Swivel!

Please order in bag/box quantities for quick and easy shipping /receiving of your order. Use BANJO Part Numbers when ordering.

All items priced each, not per bag or box quantity.


1-800-640-2476

¾" MINI T-STRAINER W/BLACK BOWLPART NO DESCRIPTION QTY PRICE

LSTM075-30LSTM075-50LSTM075-80LSTM075-100

¾" x ¾" Black Bowl Strainer w/30 Mesh Screen 1 $18.26




Polypropylene Mini “T ” Line Strainers

½" Mini T-Strainer with Clear Bowl

½" Mini T-Strainer with Black Bowl

FEATURES• Heavy-duty glass reinforced polypropylene.• Clear or black polypropylene bowl.• Polypropylene ribbed 316 stainless steel screens.• EPDM gaskets standard.• Clear Bowl Max 100 P.S.I. at 70°F.

Black Bowl Max 150 P.S.I. at 70°F.• Convenient color coded screens for easy mesh

size identification. (Refer to chart below)

½" MINI T-STRAINER W/CLEAR BOWLPART NO DESCRIPTION QTY PRICE

LSTM050-30CLSTM050-50CLSTM050-80CLSTM050-100C

½" x ½" Clear Bowl Strainer w/30 Mesh Screen 1 $24.29




½" MINI T-STRAINER W/BLACK BOWLPART NO DESCRIPTION QTY PRICE

LSTM050-30LSTM050-50LSTM050-80LSTM050-100

½" x ½" Black Bowl Strainer w/30 Mesh Screen 1 $18.26




¾" MINI T-STRAINER W/CLEAR BOWLPART NO DESCRIPTION QTY PRICE

LSTM075-30CLSTM075-50CLSTM075-80CLSTM075-100C

¾" x ¾" Clear Bowl Strainer w/30 Mesh Screen 1 $24.52




SCREENSMESH SIZE RIB COLOR30 MESH YELLOW50 MESH RED80 MESH BLUE100 MESH GREEN


1-800-640-2476

FEATURES• Heavy-duty glass reinforced polypropylene.• Clean-out plug.• 316 stainless steel reinforced screens.• EPDM gaskets standard. FKM (viton type) available.• 150 P.S.I. at 70°F.

Polypropylene “T” Line Strainers

¾" And 1"1¼" And 1½"

¾" T-STRAINER W/SS SCREENSPART NO DESCRIPTION QTY PRICE

LST075-16 ¾" x ¾" T Strainer w/16 Mesh SS Screen 1 $32.78





1" T-STRAINER W/SS SCREENSPART NO DESCRIPTION QTY PRICE

LST100-16 1" x 1" T Strainer w/16 Mesh SS Screen 1 $32.78



LST100-80 1" x 1" T Strainer w/80 Mesh SS Screen 1 $38.57LST100-100 1" x 1" T Strainer w/100 Mesh SS Screen 1 $38.57

1¼" T-STRAINER W/SS SCREENSPART NO DESCRIPTION QTY PRICE

LST125-16 1¼" x 1¼" T Strainer w/16 Mesh SS Screen 1 $65.31





1½" T-STRAINER W/SS SCREENSPART NO DESCRIPTION QTY PRICE

LST150-16 1½" x 1½" T Strainer w/16 Mesh SS Screen 1 $65.31





SCREENSMESH SIZE RIB COLOR16 MESH GRAY30 MESH YELLOW50 MESH RED80 MESH BLUE100 MESH GREEN

Add poly micro valve for easy clean out!

LVHB038050MTV LV050100MTV


PSIPIPE SIZE

OPENING THRU BALLQTY PRICE

LV038050MTV3⁄8" Female x ½" Male NPT Micro Valve for ½" Drain Plug 300 3⁄8"x½" 3⁄8" 1 $17.87

LVHB038050MTV3⁄8" Hose Barb x ½" Male NPT Micro Valve for ½"Drain Plug 300 ½" 3⁄8" 1 $17.87

LV050100MTV ½" Female x 1" Male NPT Micro Valve for 1" Drain Plug 300 ½"x1" 15⁄32" 1 $17.87

LVHB075100MTV ¾" Hose Barbx 1" Male NPT Micro Valve for 1" Drain Plug 300 1" 15⁄32" 1 $17.87


1-800-640-2476

FEATURES• Precision molded construction.• Corrosion resistant.• Lightweight.• Fiberglass reinforced.• Easy grip end cap.• Poly ribbed 304 stainless steel screen.• EPDM gaskets FKM (viton type) available.• Heavy duty end cap threads.• 150 P.S.I. Maximum.• Clean-out plug.• Female NPT x Female NPT.

½"-1¼" Polypropylene “Y” Strainers

½" Y-STRAINER W/POLY RIBBED SS SCREENSPART NO DESCRIPTION QTY PRICE

LS050-20 ½" x ½" Y Strainer w/20 Mesh SS Screen 1 $31.00LS050-40 ½" x ½" Y Strainer w/40 Mesh SS Screen 1 $31.00LS050-60 ½" x ½" Y Strainer w/60 Mesh SS Screen 1 $31.00LS050-80 ½" x ½" Y Strainer w/80 Mesh SS Screen 1 $31.00

¾" Y-STRAINER W/ POLY RIBBED SS SCREENSPART NO DESCRIPTION QTY PRICE

LS075-20 ¾" x ¾" Y Strainer w/20 Mesh SS Screen 1 $31.00LS075-40 ¾" x ¾" Y Strainer w/40 Mesh SS Screen 1 $31.00LS075-60 ¾" x ¾" Y Strainer w/60 Mesh SS Screen 1 $31.00LS075-80 ¾" x ¾" Y Strainer w/80 Mesh SS Screen 1 $31.00

1" Y-STRAINER W/ POLY RIBBED SS SCREENSPART NO DESCRIPTION QTY PRICE

LS100-20 1" x 1" Y Strainer w/20 Mesh SS Screen 1 $31.00LS100-40 1" x 1" Y Strainer w/40 Mesh SS Screen 1 $31.00LS100-80 1" x 1" Y Strainer w/80 Mesh SS Screen 1 $34.04

1¼" Y-STRAINER W/ POLY RIBBED SS SCREENSPART NO DESCRIPTION QTY PRICE

LS125-20 1¼" x 1¼" Y Strainer w/20 Mesh SS Screen 1 $31.00LS125-40 1¼" x 1¼" Y Strainer w/40 Mesh SS Screen 1 $31.00LS125-80 1¼" x 1¼" Y Strainer w/80 Mesh SS Screen 1 $34.04

Add poly micro valve for easy clean out!


1-800-640-2476

FEATURES• Precision molded construction.• Corrosion resistant.• Lightweight.• Fiberglass reinforced.• Easy grip end cap.• Poly ribbed 316 stainless steel screen.• EPDM gaskets FKM (viton type) available.• Heavy duty end cap threads.• 1 ½"- 2" 150 P.S.I. Maximum.• Clean-out plug.• Female NPT x Female NPT.

1½"-2" Polypropylene “Y” Strainers

1½" Y-STRAINER W/ALL POLY SCREENSPART NO DESCRIPTION QTY PRICE

LS150-12P 1½" x 1½" Y Strainer w/12 Mesh All Poly Screen 12 $68.22LS150-20P 1½" x 1½" Y Strainer w/20 Mesh All Poly Screen 12 $68.22LS150-50P 1½" x 1½" Y Strainer w/50 Mesh All Poly Screen 12 $68.22

2" Y-STRAINER W/ALL POLY SCREENSPART NO DESCRIPTION QTY PRICE

LS200-12P 2" x 2" Y Strainer w/12 Mesh All Poly Screen 12 $68.22LS200-20P 2" x 2" Y Strainer w/20 Mesh All Poly Screen 12 $68.22LS200-50P 2" x 2" Y Strainer w/50 Mesh All Poly Screen 12 $68.22

1½" Y-STRAINER W/POLY RIBBED SS SCREENSPART NO DESCRIPTION QTY PRICE

LS150-06 1½" x 1½" Y Strainer w/6 Mesh SS Screen 12 $68.22LS150-12 1½" x 1½" Y Strainer w/12 Mesh SS Screen 12 $68.22LS150-20 1½" x 1½" Y Strainer w/20 Mesh SS Screen 12 $68.22LS150-30 1½" x 1½" Y Strainer w/30 Mesh SS Screen 12 $68.22LS150-50 1½" x 1½" Y Strainer w/50 Mesh SS Screen 12 $68.22LS150-80 1½" x 1½" Y Strainer w/80 Mesh SS Screen 12 $68.22LS150-120 1½" x 1½" Y Strainer w/120 Mesh SS Screen 12 $68.22

2" Y-STRAINER W/POLY RIBBED SS SCREENSPART NO DESCRIPTION QTY PRICE

LS200-06 2" x 2" Y Strainer w/6 Mesh Poly Ribbed SS Screen 12 $68.22LS200-12 2" x 2" Y Strainer w/12 Mesh Poly Ribbed SS Screen 12 $68.22LS200-20 2" x 2" Y Strainer w/20 Mesh Poly Ribbed SS Screen 12 $68.22LS200-30 2" x 2" Y Strainer w/30 Mesh Poly Ribbed SS Screen 12 $68.22LS200-50 2" x 2" Y Strainer w/50 Mesh Poly Ribbed SS Screen 12 $68.22LS200-80 2" x 2" Y Strainer w/80 Mesh Poly Ribbed SS Screen 12 $68.22LS200-100 2" x 2" Y Strainer w/100 Mesh Poly Ribbed SS Screen 12 $68.22LS200-120 2" x 2" Y Strainer w/120 Mesh Poly Ribbed SS Screen 12 $68.22


1-800-640-2476

3" SS Y-STRAINERSPART NO DESCRIPTION QTY PRICE

LSS300-BC 3" SS Body, Cap & Gaskets 1 $982.34

LSS300-B 3" SS Body 1 $643.95

LSS300-C 3" SS Cap 1 $179.52

LSS300-S EPDM Screen Seal 2 6.24

LSS300-SV FKM (viton type) Screen Seal 2 $23.97

LSS300-G EPDM Cap Gasket 1 $6.91

LSS300-GV FKM (viton type) Cap Gasket 1 $23.97

LSS300-H Handle/Clamp Assembly 1 $65.04

3" “Y” StrainersFEATURES• Lightweight.• High volume.• Constructed of glass reinforced polypropylene.• ½" drain plug in bottom of cap.• Reinforced 304 stainless steel screen.• 3" female NPT threads.• 75 P.S.I. maximum.*

NOTE: Screens Sold Separately. See chart below.

FEATURES• EPDM gaskets standard FKM (viton type) available.• Corrosion resistant.• 200 P.S.I. maximum.• Clean-out plug.• 316 Stainless steel screens sold separately.

3" Female NPT threads!

*WARNING: 3" Polypropylene “Y” Strainer to be used on suction side or non-pressure side in all applications.

3" Y-STRAINERSPART NO DESCRIPTION QTY PRICE

LSM300-04 3" x 3" Y Strainer w/4 Mesh Screen 2/Box $454.71LSM300-08 3" x 3" Y Strainer w/8 Mesh Screen 2/Box $454.17LSM300-12 3" x 3" Y Strainer w/12 Mesh Screen 2/Box $454.17LSM300-20 3" x 3" Y Strainer w/20 Mesh Screen 2/Box $454.17LSM300-50 3" x 3" Y Strainer w/50 Mesh Screen 2/Box $454.17

See page 142 for poly micro

valve clean out!


1-800-640-2476

HANDLER CHEMICAL INDUCTORS

The 15 US gallon Handler 1 is the smallest Handler and is designed primarily forinduction of chemical into sprayers. The Handler 1 is a free standing unit (shown)and is a popular factory installed addition to some of the top sprayers on the market today. The Handler 1 also features a special venturi designed for small sprayers with capacities of less than 300 gallons. The Handler 1 does notcome with the venturi balk draw capability.

Handler I $1425.00


1-800-640-2476


With a capacity of 42 US gallons and 2" or 3" connection sizes, the Handler II allowsthe user to batch mix everything from liquids to dry products and powders, as welldirectly induct chemical into the sprayer. The Handler II comes standard with the ability to draw directly from bulk containers using the Handler double venturi. The The Handler II has a standard single nozzle agitation system for mixing dryformulations and assisting in tank cleaning. It is available with or without theintegrated pump and pump platform.

Handler II with 2" Plumbing $1797.00Handler II with 3" Plumbing $2585.00


1-800-640-2476


The Handler III is available with 2" or 3" connections. The 70 gallon capacity ofthis unit allows the user to batch mix everything from liquids to dry flowable andpowders, as well as directly induct chemical through a venturi while the sprayer isbeing filled. The Handler III comes standard with the ability to draw from bulkcontainers using the Handler double venturi. The Handler III is available with orwithout an integrated pump and comes with a RotaCraft tank rinse nozzleto prevent contamination of products. It also has a standard single nozzle agitation system for mixing dry formulations.

Handler III with 2" Plumbing $2247.00Handler III with 3" Plumbing $2980.00


1-800-640-2476


The Handler IV is definitely the king of the batch and induction systems on the market today. Two 2" agitators, two lids, 3" manifold fittings, full draining cone-bottom tank, convenient forklift-ready base and containment tray. The largeground operator, the aerial appplicator and the commercial user all love theversatility of the Handler IV. With a working capacity of 230 US gallons, theHandler IV allows the user to batch mix everything from liquids to dry flowablesand powders. The Handler IV comes complete with all the plumbing requiredfor recirculation with 3" lines, plus a RotoCraft tank rinse nozzle to prevent productcontamination. The bottom of the Handler IV is sloped for full drainage, and a special bulkhead at the bottom of each tank ensures complete drainage. Withthe Handler IV you can fill your sprayer in less time and save money.

Handler IV with 3" Plumbing $4725.00


1-800-640-2476

NEW Liquid Blockage Monitor System (LBMS) Detects Low Flow and Blocked Lines.

Now you can know your liquid application flow from the cab of your tractor.Features of LBMS:

• Magnetic sensing technology mounted behindVisaGage II Flow Monitors.

• Can be mounted to existing VisaGage II units,new magnetic balls are supplied.

• Identifies where magnetic balls are floating ineach row during application.

• Shows both low and no-flow, plus premiumsystems show high flow for broken lines.

• See a visual display and hear an audible alarm on the control panel from your tractor cab.• Can be used with cloudy or dark liquids, LED is visible to the sides of the columns.• Each row with a problem, will be highlighted by a flashing LED light at the row. No need to remember or

search for the blocked row when you come to a stop.• Alarm will reset automatically when the blockage has been corrected.• Can “Pause” the system to capture problem rows for investigation later when you are able to stop.• Two display options are available, our standard wired display or the popular wireless Apple iPad®.• LBMS iPad app is free and available from the Apple App Store. Plus the app can be run in the background.

www.cds-johnblue.com

Plumb between VisaGagesets to complete system

Control/Powerfor LBMS System

Pump

Add additional extensionharnesses as needed

Add additional end cap fittings#SMPT-0061 as needed

Control/Powerfor LBMS System

Pump

Use harnesses assupplied with system

Example of Traditional “Grouped” VisaGages

Installation Options for SMSS Style VisaGage II Flow Monitors

Example of Optional “Spaced” Sets of VisaGages:For use with a log type manifold system or when a shorter

line length to each row is desired


1-800-640-2476

Premium System (Wireless)

Step 1: Purchase a Premium 8 Row Liquid Blockage Monitor Kit, #BMI-08

Step 2: If the harness lengths supplied are not long enough for your machine measurements, additional harnesses can be ordered and added anywhere in the circuit:

BMPT-012 28FT Extension harnessBMPT-013 15FT Extension harnessBMPT-014 7FT Extension harness

Step 3: Purchase the required number of 4-Row Sensor Expansion Kits (#BMPT-001, item

E) to cover the number of rows on your machine (extra rows are ok). The location of the individual sensors does not matter and they do not have to be evenly split.

Step 4: Order the required number of VisaGage II assemblies for your machine. At installation replace the standard balls with the appropriate magnet ball for your specific row flow rate.

Step 5: Purchase an iPad 2 or newer model (Wi-Fi or 3G any memory size) and make sure it is running iOS 6 or higher. Purchase a charging adapter that will work best for your tractor.

Add extra sensorassemblies here(typ. both sides)

A

F

B

C

D E

Premium System * (iPad2 or newer display running iOS 6 or higher)

Part Number Description

BMi-08

Premium 8 Row Kit Includes:A. iPad ram mounting bracketB. Input harnessC. 28 ft. extension harnessD. Wireless sensor kitE. Standard sensor kitF. Two terminator plugs

BMPT-0014 Row Sensor Expansion Kit for adding to BMi-08 - Includes: standard sensor, tee harness, magnet balls and hardware.

*VisaGage II’s are ordered separately: SMSS4 set of 4 Flow Monitor Spray Type and SMFD4 set of 4 Flow Monitor Divider Type.

How To Order:

Standard Control Panel (Wired)*

Standard Control System *


BM-08AP

Applicator 8 Row Kit Includes:A. Control panel with mount bracketB. Input harnessC. 28 ft. extension harnessD. Tee harnessE. Two standard sensor kitsF. Two terminator plugs

BM-08PL

Planter 8 Row Kit Includes:A. Control panel mounting bracketB. Input harnessC. 28 ft. extension harnessD. Tee harnessE. Two standard sensor kitsF. Two terminator plugsG. Two 15 ft. extension harnesses

BMPT-0014-Row Sensor Expansion Kit for adding to BM-08AP and BM-08PL - includes: standard sensor, tee harness, magnet balls and hardware.

*VisaGage II’s are ordered separately: SMSS4 set of 4 Flow Monitor Spray Type and SMFD4 set of 4 Flow Monitor Divider Type.

Blocked RowLED

SelectionButton

Alarm SettingIndicator

Standard Control Panel

10 ft12 ft

28 ft

15 ft 15 ft

C

A B

D F

G

F

Add extra sensorassemblies here(typ. both sides)

Step 1: Purchase one of the Standard 8 Row Liquid Blockage Monitor Kits, BM-08AP or BM-08PL, which differ by item(s) “G”. See the following:

Step 2: If the harness lengths supplied are not long enough for your machine measurements, additional harnesses can be ordered and added anywhere in the circuit:

BMPT-012 28FT Extension harnessBMPT-013 15FT Extension harnessBMPT-014 7FT Extension harness

Step 3: Purchase the required number of 4-Row Sensor Expansion Kits (#BMPT-001, item E) to cover the number of rows on your machine (extra rows are ok). The location of the individual sensors does not matter and they do not have to be evenly split.

Step 4: Order the required number of VisaGage II assemblies for your machine. At installation replace the standard balls with the appropriate magnet ball for your specific row flow rate.

How To Order:

F

CALL FOR PRICINGAgroSpray Ltd. Tillsonburg, Ontario [email protected]

1161-800-640-2476

CDS JOHN BLUE PISTON PUMPS

NEW NGP 4055-F SERIESModel Max Max Max ListNumber GPM PSI RPM INLET OUTLET CLUTCH Price

NGP4055F 10.2 120 450 1" FLANGE 1" OUTLET NO CLUTCH $2,082.00Equivilent to the 1250 series

NEW NGP 5055-DRF SERIESModel Max Max Max ListNumber GPM PSI RPM INLET OUTLET CLUTCH Price

NGP5055DRF 20.4 120 450 1" FLANGE 1" FLANGE NO CLUTCH $3,113.85

NEW NGP5655-ARF SERIESModel Max Max Max ListNumber GPM PSI RPM INLET OUTLET CLUTCH Price

NGP5655ARF 31.2 120 450 1" SMALL 1" SMALL NO CLUTCH $3,025.8411/2" LARGE 11/2" LARGE

APPLY 2 PRODUCTS AT 2 RATES WITH 1 PUMP

NGP6050 SERIESModel Max Max Max ListNumber GPM PSI RPM INLET OUTLET CLUTCH Price

NGP6050 21 120 450 11/2" 11/2" ROPE $2,506.36NGP6055 21 120 450 11/2" 11/2" NO CLUTCH $2,006.32NGP6058 21 120 450 11/2" 11/2" ELECTRIC $2,708.99NGP6059 21 120 450 11/2" 11/2" HYDRAULIC $2,627.37


1-800-640-2476

CDS JOHN BLUE PISTON PUMPSNGP7050 SERIES

Model Max Max Max ListNumber GPM PSI RPM INLET OUTLET CLUTCH Price

NGP7050 34.2 120 450 11/2" 11/2" ROPE $2,877.98NGP7055 34.2 120 450 11/2" 11/2" NO CLUTCH $2,350.17NGP7058 34.2 120 450 11/2" 11/2" ELECTRIC $3,068.74NGP7059 34.2 120 450 11/2" 11/2" HYDRAULIC $3,029.25


NGP8050 42 120 450 11/2" 11/2" ROPE $3,602.23NGP8055 42 120 450 11/2" 11/2" NO CLUTCH $3,176.25NGP8058 42 120 450 11/2" 11/2" ELECTRIC $3,833.65NGP8059 42 120 450 11/2" 11/2" HYDRAULIC $3,735.26

NEW NGP8055-AR DUAL RATE PISTON PUMPModel Max Max Max ListNumber GPM PSI RPM INLET OUTLET CLUTCH Price

NGP8055AR 42 120 450 11/2" 11/2" NO CLUTCH $2,989.68

21.0 GPM PER SIDE


NGP9050 68.4 120 450 11/2" 11/2" ROPE $3,851.98NGP9055 68.4 120 450 11/2" 11/2" NO CLUTCH $3,533.26NGP9058 68.4 120 450 11/2" 11/2" ELECTRIC $4,150.00NGP9059 68.4 120 450 11/2" 11/2" HYDRAULIC $4,129.68

NEW NGP9055-AR SERIESModel Max Max Max ListNumber GPM PSI RPM INLET OUTLET CLUTCH Price

NGP9055AR 68.4 120 450 11/2" 11/2" NO CLUTCH $3,353.28

34.2 GPM PER SIDE


1-800-640-2476

CDS-JOHN BLUE LOW PRESSURE POLY PUMPS

DP43PDESCRIPTION PRICE

Maximum Flow: 4.3 gpm @ 550 rpm and 290 psi. $599.00Maximum Pressure: 290 psi.Maximum Speed: 650 rpmMaximum Power: 1.0 hp @ 550 RPM and 290 psi.Diaphragms: 2


Maximum Flow: 19.8 gpm $864.00Maximum Pressure: 218 psi.Maximum Speed: 550 rpmMaximum Power: 2.8 hpDiaphragms: 3

DPD282PDESCRIPTION PRICE

Maximum Flow: 28.2 gpm $1,285.00Maximum Pressure: 218 psiMaximum Speed: 550 rpmMaximum Power: 4.1 hpDiaphragms: 3


Maximum Flow: 33.3 gpm $1,344.00Maximum Pressure: 218 psi.Maximum Speed: 550 rpmMaximum Power: 4.8 hpDiaphragms: 3


1-800-640-2476

CDS-JOHN BLUE LOW PRESSURE POLY PUMPS




Maximum Flow: 55.5 gpm $2,517.99Maximum Pressure: 218 psi Maximum Speed: 550 rpmMaximum Power: 8.0 hpDiaphragms: 5

NEW DP-687-P (replaces DP-605.2-P)DESCRIPTION PRICE



1-800-640-2476

PUMP REPAIR KITSPART# DESCRIPTION PRICEF-592 Gasket Repair Kit - For Acid Pumps FA-500 and FA-501 $83.91

F-592-U Gasket Repair Kit - For Fumigant Pumps FA-500-U, FA-500 and FAC-500-U $190.18

109414 Gasket Repair Kit - For Acid Pumps FA-550 and FA-551 $203.10

109415 Gasket Repair Kit - For Fumigant Pumps FU-550 and FU-551 $248.75

L-1095-B Gasket Repair Kit - For L-1094 Pump (for SN Above 2100) and L-905 Pump $108.67

L-3090 Gasket Repair Kit - For L-3000-SS, L-4900, L-4905 and L-4910 Pumps $158.45

L-4090 Gasket Repair Kit - For L-4000-SS, L-4400, and L-4409 Pumps $104.01

L-4090-U Gasket Repair Kit - For L-4400 Fumigant Pump $229.83

S-555-Q Gasket Repair Kit - For “Blue” Quad Spray Pump $188.31

S-555-T Gasket Repair Kit - For “Blue” Twin Spray Pump $109.76

115036 Gasket Repair Kit - For LM-1255 Pump $157.76

113717 Gasket Repair Kit - For LM-2450 Pump $85.91

111953 Gasket Repair Kit - For LM-4450 and L-4400-HS Pumps $95.63

111947 Gasket Repair Kit - For LM-4950 and L-4900-HS Pumps $166.63

116134 Gasket Repair Kit - For NGP-4050 $165.73

116135 Gasket Repair Kit - For NGP-5050 call




115789-AR Gasket Repair Kit - For NGP-8055-AR $140.45

115789-DR Gasket Repair Kit - For NGP-8055-DR $140.45


113842 Fumigant Kit - For LM-2450 Pump $273.47

114638 Fumigant Kit - For LM-4450 and L-4400-HS Pumps $236.67

114899 Fumigant Kit - For LM-4950 and L-4900-HS Pumps $460.83

Gasket Repair Kit includes all gaskets and rubber seals; o-rings, piston seals, rod seals and crankshaft seals

Squeeze Pump Hoses PART# DESCRIPTION PRICEL-1265 Squeeze Pump Hose Kit - 6 Hose Set, 1/2” Hose $77.66

LA-1265 Squeeze Pump Hose Kit - 8 Hose Set, 5/16” Hose $63.29

87249 Squeeze Pump Hose - 1 Hose, 1/2” Hose $7.03

87250 Squeeze Pump Hose - 1 Hose, 5/16” Hose $6.85

08-0010 3/8” Diameter Squeeze Tube for “B” Model Pump $5.95

08-0020 5/8” Diameter Squeeze Tube for “L” Model Pump $9.32


1-800-640-2476

Miscellaneous ComponentsPART # DESCRIPTION PRICEJBSMPT-007 O-ring $2.39

JBSMPT-0009 Ball storage unit - optional - holds up to 40 balls $8.96

JBSMPT-0014 1” NPT female inlet port and 1/4” female NPT $7.74

JBSMPT-0021 7/16” Stainless Steel Ball - optional $2.23

JBSMPT-0034 #112 Viton O-ring - optional - used to seal orifice plates $1.12

JBSMPT-0049 flange with o-rings and 1/4” female NPT port for gauge. $8.66

JBSMPT-0050 Yellow Ball l - 13% heavier than the blue plastic ball $1.08

JBSMPT-0051 1/4” Tube Push Connect Elbow Adapter $5.46



Poly Applicator Check Valves, 3PsiJBCV-1103 Poly Check Valve, 1/4” NPT Female Inlet and Outlet $10.65

JBCV-1103-P14 Poly Check Valve, 1/4” Push Connect Inlet and Outlet $16.92



Poly Applicator Check Valves, 10PsiJBCV-1110 Poly Check Valve, 1/4” NPT Female Inlet and Outlet $10.65




Low Pressure Poly Pump Repair KitsModel # Repair Kit Price Valve Kit PriceDP-193-PP DP-63988197 $318.60 DP-639872973 $347.89DP-282-P DP-62981097 $336.60 DP-62980597 $483.19DP-332-P DP-62981097 $336.60 DP-62980597 $483.19DP-448-P DP-28989397 $422.83 DP-28988597 $641.25DP-555-P DP-55980997 $499.66 DP-55980397 $801.69DP-605.2-P DP-14989397 $654.60 DP-14987697 $960.39DP-43-P DP-94991297 $217.15 DP-94991697 $92.12


1-800-640-2476

JOHN BLUE VISAGUAGE ASSEMBLY

4 ROW ASSEMBLYJBVISAGUAGE4 $193.61

KIT INCLUDES 4- CHECK VALVES8 -1/4"NPT X 1/4" HOSE FITTING4- 3/8 MPT 90 X 1/4" HOSE FITTING1-TEE1- 1/4" STREET ELBOW1- 0-60 PRESSURE GUAGE1- BJHB100075 HOSE BARB4- ORFICE ORING4- S.S ORFICE DISC


KIT INCLUDES 6- CHECKVALVES12 -1/4"NPT X 1/4" HOSE FITTING6- 3/8 MPT 90 X 1/4" HOSE FITTING1-TEE1- 1/4" STREET ELBOW1- 0-60 PRESSURE GUAGE1- BJHB100075 HOSEBARB6- ORFICE ORING6- S.S ORFICE DISC


KIT INCLUDES 8- CHECKVALVES16 -1/4"NPT X 1/4" HOSE FITTING8- 3/8 MPT 90 X 1/4" HOSE FITTING1-TEE1- 1/4" STREET ELBOW1- 0-60 PRESSURE GUAGE1-BJHB100075 HOSEBARB8- ORFICE ORING8- S.S ORFICE DISC


1-800-640-2476

JOHN BLUE VISAGUAGE ASSEMBLY


KIT INCLUDES 12- CHECKVALVES24 -1/4"NPT X 1/4" HOSE FITTING12- 3/8 MPT 90 X 1/4" HOSE FITTING1-TEE1- 1/4" STREET ELBOW1- 0-60 PRESSURE GUAGE1- BJHB100075 HOSEBARB12- ORFICE ORING12- S.S ORFICE DISC


KIT INCLUDES 16- CHECKVALVES32 -1/4"NPT X 1/4" HOSE FITTING16- 3/8 MPT 90 X 1/4" HOSE FITTING1-TEE1- 1/4" STREET ELBOW1- 0-60 PRESSURE GUAGE1- BJHB100075 HOSEBARB16 ORFICE ORING16- S.S ORFICE DISC


KIT INCLUDES 24- CHECKVALVES48 -1/4"NPT X 1/4" HOSE FITTING24- 3/8 MPT 90 X 1/4" HOSE FITTING2-TEE1- 1/4" STREET ELBOW1- 0-60 PRESSURE GUAGE2- HB100075 HOSE BARB24- ORFICE ORING24- S.S ORFICE DISC1- BJTEE075 2- BJHB075901- BJHB075


1-800-640-2476

VISA GUAGE FLOW MONITORSFOR USE WITH SPRAYERS

PART# DESCRIPTION PRICEJBSMSS1 Single Flow Monitor Assembly - Spray Type includes single

body, 3/8” NPT female inlet and outlet,(5) 1/2” diameter $24.57

balls,end cap, Viton O-rings and stainless steel retainer

clips.

JBSMSS4 Set of 4 Flow Monitor Assembly - Spray Type includes 4

bodies, 1/2” NPT female inlet, 3/8” NPT female outlet, (20) $77.33

1/2” diameter balls, end cap, Viton O-rings and stainless

steel retainer clips.

JBSMSS1-PE14 Spray Single - 1/4 Elbow Push out, NPT in $30.90



JBSMSS4-PE14 Spray Set 4 - 1/4 Elbow Push out, NPT in $103.40



*ADD FUM AFTER PART # FOR FUMIGANT MODELS

FOR USE WITH FLOW DIVEDERS OR SQUEEZE PUMPS

PART# DESCRIPTION PRICEJBSMFD1 Single Flow Monitor Assembly - Flow Divider Type includes

single flow divider monitor body, 3/8” NPT female inlet $21.75

and outlet, (5) 1/2” diameter balls, end cap,Viton O-rings

and stainless steel retainer clips.

JBSMFD4 Set of 4 Flow Monitor Assembly - Flow Divider Type

includes 4 bodies, 3/8” NPT female inlet and outlet, $82.63

(20) 1/2” diameter balls, end cap, Viton O-rings

and stainless steel retainer clips.

JBSMFD1-PE14 FD Single - Elbow 1/4 Push in/Out $26.94

JBSMFD1-PE38 FD Single - Elbow 3/8 Push in/Ou $27.45

JBSMFD1-PE56 FD Single - Elbow 5/16 Push in/Out $27.24

JBSMFD4-PE14 FD Set of 4 - Elbow 1/4 Push in/Out $108.79

JBSMFD4-PE38 FD Set of 4 - Elbow 3/8 Push in/Out $110.79

JBSMFD4-PE56 FD Set of 4 - Elbow 5/16 Push In/Out $109.94

*ADD FUM AFTER PART # FOR FUMIGANT MODELS


1-800-640-2476

CDS-John Blue Company is excited to introduce our upgraded 12-Volt Speed Controller. We have taken our customers’ ideas and incorporated them into our new design. Accurate and smooth control over a wide range of RPM’s, stand-alone gauge option, easily readable digital display, better wiring connectors, standard run/hold on 35 amp units plus much more. We consolidated greater amp capacity through better design, all at a competitive price. The 12-Volt Controller coupled with the CDS-John Blue 12-Volt Pump is ideal for low volume fertilizer applications.

The CDS-John Blue 12-Volt Controller is available in 15 and 35 amp models. A stainless steel ammonia pressure gauge is available as an option with or without a plumbing kit. The 35 amp is also available with a digital display, which keeps pressurized fertilizers or chemicals out of the cab of the tractor. The remote stainless steel sensor has a ¼” NPT male fitting and uses a 20 foot wiring harness. The 35 amp control comes standard with run/hold feature, which can be wired to your implement lift switch using a whisker or proximity switch.

Features:• Rheostat manual speed control for 12-Volts Pumps.• 6” wiring pigtails for power input and output for motor standard.• Sealed heavy-duty electrical connectors.• Reverse polarity protection.• On/off control switch with power indicator lamp.• Smoother adjustment of pump flow/pressure, which results in reduced sensitivity at

the top of the adjustment scale.• Heavy-duty OEM style stainless steel pressure sensor, for positive liquid control.• In-line automotive style fuse.• Optional stainless steel ammonia gauge can be mounted either outside of the cab or

onto the control box with the provided bracket.• Run/hold circuit on 35 amp units.• Control mounting hardware included.• All CDS-John Blue 12-Volt Controllers are backed by a 1-year warranty.• Input/output wiring set, see part number AKSCP-029.• Gauge, tube and fittings kit, see part number AKSCP-033.

12-Volt Speed Controller


1-800-640-2476


15 Amp ControllersAKSC15-200 15 amp control, no gauge with wiring kitAKSC15-201 15 amp control, with ss gauge, tube and wiring kitAKSC15-205 15 amp control, no gauge or wiring kitsAKSC15-206 15 amp control with ss gauge only

35 Amp ControllersAKSC35-200 35 amp control, no gauge with wiring kitAKSC35-201 35 amp control, with ss gauge, tube and wiring kitAKSC35-205 35 amp control, no gauge or wiring kitsAKSC35-206 35 amp control with ss gauge only

35 Amp Digital Controllers – no chemicals in the cabAKSC35-202 35 amp control digital gauge with wiring kitAKSC35-207 35 amp control digital gauge, no wiring kit

Spare PartsAKSCP-021 15 ft. digital pressure sensor extension cableAKSCP-023 60 psi ss ammonia gauge kit – ¼” male npt inlet, includes: AKSCP-005 gauge,

AKSCP-022 bracket, 90505 screwsAKSCP-029 Input/output wiring set, includes: 10 ft. red/black power in, 20 ft. white/black mo-

tor outAKSCP-030 Replacement digital pressure sensor assemblyAKSCP-031 20 ft. motor output extension cableAKSCP-032 Replacement 20 ft. digital pressure sensor cableAKSCP-033 Gauge, tube and fittings kit, includes: 20 ft. ¼” poly tube, union, ¼” npt male &

female adapters, AKSCP-023 gauge kitAKSCP-034 Mounting screw set, includes: 4 each #10-24x1” screws and ext. tooth washer

locknuts

12-Volt Controller and Accessories

$197.72 $260.09 $145.88 $184.97

Price

$280.89 $352.20$195.32$240.12

$448.59$422.04


1-800-640-2476

CDS-John Blue 12-Volt PumpsAutomatic demandChemical resistant construction suitable for most fertilizers2-year unconditional warrantyFour piston diaphragm for a smoother flow.

12VOLT 2.2GPMPART# DESCRIPTION PRICE

$201.99JBAP0816W 2.2 gpm, max amp draw 7 amps

Inlet/outlet ports 15 mm quick connect ports $181.62

JBAP0819W 2.2 gpm, max amp draw 7 amps, ports ½” NPT male

12VOLT 3.6GPMPART# DESCRIPTION PRICEJBAP1216W 3.6 gpm, max amp draw 12 amps $214.99

inlet/outlet ports 15 mm quick connect ports Including clear sight glass strainer


inlet/outlet ports ½” NPT male

12VOLT 4.8GPMPART# DESCRIPTION PRICEJBAP1816W 4.8 gpm, max amp draw 13 amps $243.99

inlet/outlet ports 15 mm quick connect portsincluding clear sight glass strainer


inlet/outlet ports ½” NPT male

12VOLT REPLACEMENT PARTSPART# DESCRIPTION PRICEJBAK1317W Universal Microswitch kit $23.15JBAK1322W Universal pump head $88.59JBAK1323W Universal inlet strainer 90 degrees $23.65JBAK1584W Quick connect ½” bar $1.76JBAK1591W Quick connect ½” bar $9.56JBAK1592W Quick connect ¾” barb elbow $10.08


1-800-640-2476

CDS-John Blue Flow Divider

302 SS balanced spring offers superior performance and corrosion resistance.

Field repairable without removing distribution lines.

Exclusive Viton® lip seal is more stable and has a longer life than conventional diaphragms.

Upper portion of needle is 316 SS, which means longer seal life. The special glass-filled Teflon® middle needle offers smooth operation with minimum friction. New - Spherical designed needle tip has better impact resistance.

316 SS sleeve can be easily removed for cleaning in the field. Alignment pin ensures that the sleeve will be replaced in exactly the same position every time.

New - Spherical tip allows needle to open easier increasing accuracy at lower application rates.

Viton® o-rings are used for positive sealing for even hard to handle products.

New - Shorter sleeve increases volume in chamber, reducing operating pressures.

New - Numbered ports for ease of tracing lines.

New - Tapered inlets reduce turbulence resulting in smoother flow and improving accuracy.

New - Company name and phone number engraved in part for better in-field serviceability (not pictured)

New - Added wrench flats for ease of installation.US Pat No 6311716

Flow Divider and Flow Divider MountPart Number Description Outlets Inlet Outlet PRICE

FD-0610 Stainless Steel Flow Divider 6 3/4” FPT 1/4” FPT $544.02

FD-1210 Stainless Steel Flow Divider 12 3/4” FPT 1/4” FPT $806.29

FD-2010 Stainless Steel Flow Divider 20 1” FPT 1/4” FPT $1507.90

113989 Manifold Mount

Newly Revised Flow Divider

$91.61


1-800-640-2476

Impellicone® Flow Divider for Anhydrous Ammonia

CDS-John Blue Impellicone Flow DividersPart Number Description Inlet Size Outlet SizeNEW IP-0600 6 Outlet NH3 Flow Divider 1” NPT 1/4” NPTIP-1300 13 Outlet NH3 Flow Divider 1” NPT 1/4” NPTIP-1800 18 Outlet NH3 Flow Divider 1” NPT 1/4” NPT

The CDS-John Blue Impellicone is a flow divider designed for Anhydrous Ammonia (NH3) . It distributes NH3

to multiple rows across an applicator with the accuracy and flexibility you have come to expect from CDS-John Blue Products. Impellicone’s name comes from the unique shaped needle, which spins and mixes the liquid and gas phases distributing

them evenly to the number of outlets you need. The CDS-John Blue Impellicone can be used for all NH3

applications at normal rates, while also offering the flexibility to plug unused outlets without sacrificing accuracy. A simple design allows for ease of service without removing the distribution lines, however it is recommended that proper handling techniques for NH3 be used at all times. The

Impellicone’s superior accuracy allows better control of targeted rates greatly reducing the over-application of NH3. This will result in

less nitrogen leaching, lower crop yield variability and ultimately lowering overall application costs.

After extensive testing through Iowa State, field trials and a lengthy approval process, CDS-John Blue Company is proud to offer patented technology in three

models, IP-0600 (6-outlet), IP-1300 (13 outlet) and IP-1800 (18 outlets).

PRICE$427.92$527.50$718.20


1-800-640-2476

The CDS-John Blue Replacement Knife

R-Series CDS-John Blue Replacement Knives:• High strength ductile knife.• Easy to replace (R-483) tube.• Hard facing to protect the tube.• Easy replacement - only one pin is needed to replace

(R-482) toe, no cutting or welding is required.

R-481

CDS-John Blue Products Deliver the Features and Durability You Can Depend On - Year After Year!

CDS-John Blue Company is an industry leader with significant name recognition and a superb reputation in the field. Our customers demand CDS-John Blue Pumps because they have proven to be a reliable and effective tool for the agricultural industry.

Ed WunschVice PresidentBig W Sales, CA

Replaceable Knife and ComponentsPart Number Blade TypeR-481 Front SweptR-482 Front SweptR-483 Front Swept

DescriptionHeavy Duty Blade - Super Ductile Iron With Replaceable Toe & Tube Replaceable Toe - Ductile Iron, Replacement for R-473 & R-481 Blades Replaceable Tube - 1/8” Stainless Steel, Replacement for R-481 Blades

PRICE$94.95$32.50$24.99


1-800-640-2476

Irrigation Injection Pumps

Compact, Durable Small Range Pump Units

Pumping cylinders can be mounted in parallel for large volume applications or for injection of two non-compatible products.

A simple change of stroke length sets the precise flow to be injected.

Maximum pressure 150 psi.

E-Z Meter Pumps with the double ball, built-in check valves provide better performance by virtually eliminating air locking. Available in 316 stainless steel or Teflon® cylinders.

The latest state of the art technology is used in the CDS-John Blue piston cup seals. The upgraded seals are more forgiving when the pump is run dry between supply tank refills. The special CDS-John Blue piston cup shape provides a positive seal without the need for future adjustments. Piston cups can be changed in the field with standard tools.

Reaching New Heights in Quality and Performance

Install a CDS-John Blue Irrigation Pump and you install a pump backed by more than 125 years of manufacturing expertise. CDS-John Blue Company offers the most advanced technology for accurately metering fertilizers and chemicals through irrigation systems - drip, pivot, turf and nursery applications. All CDS-John Blue Irrigation Pumps are designed for accuracy, built for durability and proven in the field. Our broad range of injection pumps are available in both simplex and duplex models. All wetted internal parts exposed to agricultural products are made from 316 stainless steel, chemically resistant polypropylene and the highest quality seals available today. When irrigation injection of fertilizers and chemicals demands an accurate injection rate, maximum dependability and long-term reliability, then choose the CDS-John Blue Irrigation Injection Pumps that have been engineered with you in mind.


1-800-640-2476

9000 Series Cast Iron, Gear-Driven Models

9006C-O 117 78 600 Cast iron pump with oil-lubricated gear drive and 13⁄8" 45 lbs. 540 rpm female PTO hub with locking collar and mounting clip.

Clips pump to PTO shield of most tractors. 11⁄2" Inlet, 11⁄4" outlet.

9008C-O 115 76 1000 Cast iron pump with oil-lubricated gear drive and 13⁄8" 46 lbs. 11000 rpm female PTO hub with locking collar and mounting clip.


9016C-O 117 78 600 Cast iron pump with oil-lubricated gear drive and 43 lbs. 1" solid shaft, ports (NPT): 11⁄2" Inlet, 11⁄4" outlet.

9018C-O 115 76 1000 Cast iron pump with oil-lubricated gear drive and 43 lbs. 1" solid shaft, ports (NPT): 11⁄2" Inlet, 11⁄4" outlet.

9028C-O 115 76 1000 Cast iron pump with oil-lubricated gear drive and 13⁄4” 49 lbs. 1000 rpm female PTO hub with locking collar and mounting clip.


3430-0334 Seal and o-ring repair kit 4 oz. 3430-0591 Life Guard® silicon carbide seal kit 4 oz.

Available by special order: Life Guard®silicon carbide seal- Add Suffix"B"- (i.e.: 9006C-O-B) -Add $123.17

Additional features:• Life Guard® silicon carbide seals standard in all stainless steel models

• Viton® mechanical seals standard in all cast iron and polypropylene models

• Stainless steel wear rings standard in all cast iron models

• Corrosion-resistant impellers standard in all models

Rotation, clockwise or counterclockwise, is determined when looking at theshaft end of the pump.

Roundup is a registered trademark of Monsanto Company.

Most Hypro centrifugal pumps come standard with a stainless steel shaft.

Model Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

Ready for use

with Roundup®!

9006C-O-SP 120 77 600 Cast iron pump with oil-lubricated gear drive and 13⁄8" 540 rpm 57 lbs. PTO hub with locking collar and mounting clip. Clips pump to

PTO shield of most tractors, 11⁄2" Inlet, 11⁄4" outlet NPT ports.

9016C-O-SP 120 77 600 Cast iron pump with oil-lubricated gear drive and 1" solid 57 lbs. shaft, 11⁄2" Inlet, 11⁄4" outlet NPT ports.

9028C-O-SP 117 69 1000 Cast iron pump with oil-lubricated gear drive and 13⁄4" 1000 rpm 59 lbs. PTO hub with locking collar and mounting clip. Clips pump to

PTO shield of most tractors, 11⁄2" Inlet, 11⁄4" outlet NPT ports.

3430-0334 Seal and o-ring repair kit 4 oz. 3430-0591 Life Guard® silicon carbide seal kit 4 oz. 3430-0480SP Self-priming chamber kit 21 lbs.

9000 Series Self-Priming Cast Iron, Gear-Driven ModelsModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

Available by special order: Life Guard® silicon carbide seal - Add Suffix "B" - (i.e.: 9016C-O-B-SP) - Add $116.39.

CENTRIFUGAL PUMPS

1520-0034 9000P-O and 9000C-O 4 lbs. $ (not for 9040 Series)

PTO Mounting ClipsPart For Estimated ListNumber Pump Series Weight Each Price

$1383.90

$1312.50

$1248.00

$1296.75

$1522.50

$1696.80

$1678.95

$1954.32

$49.35$222.60

$49.35$222.60

$318.15

72.45


1-800-640-2476

Model Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price9006P-O 97 83 600 Corrosion-resistant and durable polypropylene pump with 37 lbs.

oil-bath lubricated gear drive for PTO mounting. Viton® seals

and 13⁄8" 540 rpm female PTO hub w/locking collar kit.

9008P-O 86 67 1000 Corrosion-resistant and durable polypropylene pump with 37 lbs. oil-bath lubricated gear drive for PTO mounting. Viton® seals

and 13⁄8" 1000 rpm female PTO hub with locking collar kit.

9016P-O 97 83 600 Corrosion-resistant and durable polypropylene pump with 37 lbs. oil-bath lubricated gear drive and 1" solid shaft. Viton® seals.

9018P-O 86 67 1000 Corrosion-resistant and durable polypropylene pump with 37 lbs. oil-bath lubricated gear drive and 1" solid shaft. Viton® seals.


Available by special order: Life Guard®silicon carbide seal- Add Suffix"B"- (i.e.: 9006P-O-B) -Add $120.92.

9202C 105 170 6000 Pedestal mount, cast iron pump with 5⁄8" solid shaft and 17 lbs. Viton® shaft seal. 11⁄4" Inlet; 1" outlet NPT ports.

9203C† 140 170 6000 Pedestal mount, cast iron pump with 5⁄8" solid shaft and 17 lbs. Viton® shaft seal. 11⁄2" Inlet, 11⁄4" outlet NPT ports.

9203C-R 140 170 6000 Pedestal mount, clockwise rotation cast iron pump, with 5⁄8" 17 lbs. solid shaft, Viton® seal and 11⁄2" x 11⁄4" NPT ports.

9205C 180 190 4200 Pedestal mount, cast iron pump with 7⁄8" solid keyed shaft, 38 lbs. Viton® seal, and 2" inlet x 11⁄2" outlet NPT ports.

9206C†† 225 80 4200 Pedestal mount, cast iron pump with 5⁄8" solid shaft and Viton® 23 lbs. shaft seal. 2" Inlet, 11⁄2" outlet NPT ports.

3430-0332 Seal and o-ring repair 3 oz. 3430-0537 Seal and o-ring repair kit (9205 models) 4 oz. 3430-0589 Life Guard® silicon carbide seal kit 3 oz. 3430-0646 Life Guard® silicon carbide seal kit (9205 models) 4 oz.

Life Guard®silicon carbide seal - Add Suffix “B” - (i.e.: 9203C-B) - Add $122.04.

9200 Series Cast Iron, Pedestal-Mount Models


CENTRIFUGAL PUMPS

9203C-SP 120 157 5500 Self-priming, pedestal mount, cast iron pump with 5⁄8" solid 30 lbs. shaft, Viton® seal, and 11⁄2" inlet, 11⁄4" outlet NPT ports.

9203C-R-SP 140 155 5500 Self-priming, pedestal mount, clockwise rotation cast iron pump 30 lbs. with 5⁄8" solid shaft, Viton® seal, and 2" x 2" NPT ports.

9205C-SP 180 120 3800 Self-priming, pedestal mount, cast iron pump with 7⁄8" solid 64 lbs. keyed shaft, Viton® seal, and 2" inlet x 2" outlet NPT ports.

9205C-BSP 180 120 3800 Self-priming, pedestal mount, cast iron pump with 7⁄8" solid 48 lbs. keyed shaft, Viton® seal, and 2" x 2" BSP ports.

3430-0332 Seal and o-ring repair kit (9203 models) 3 oz. 3430-0537 Seal and o-ring repair kit (9205 models) 4 oz. 3430-0589 Life Guard® silicon carbide seal kit (9203 models) 3 oz. 3430-0646 Life Guard® silicon carbide seal kit (9205 models) 4 oz. 3430-0480SP Self-priming chamber kit (9203 models) 21 lbs. 3430-0481SP Self-priming chamber kit (9205 models) 37 lbs. 3430-0482SP Self-priming chamber kit for reverse rotation ONLY 26 lbs.

9200 Series Self-Priming, Cast Iron, Pedestal-Mount ModelsModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

Life Guard® silicon carbide seal - Add Suffix “B” - (i.e.: 9203C-SP-B) - Add $122.04.

$1326.15

$1326.15

$1310.40

$1310.40

$517.00

$523.00

$536.55

$1316.70

$686.70

$942.90

$953.00

$2032.80

$2032.80

$70.08$242.55

$54.60$50.40

$212.10$223.65

$54.60$50.40$212.10$223.65$318.15$1630.65$770.70


1-800-640-2476

9203P-S 100 80 4200 Pedestal mount pump designed for direct drive with an electric 14 lbs. motor or belt and pulley drive with an electric motor or gas engine,7⁄8" solid keyed 316 stainless steel shaft, 11⁄2" inlet 11⁄4" outlet.

9500P-S 100 80 4200 Clockwise rotation pedestal mounted pump designed 13 lbs. for direct drive with a gas engine or electric motor, 7⁄8"

solid keyed 316 stainless steel shaft, 11⁄2" inlet 11⁄4" outlet.


CENTRIFUGAL PUMPS9200 and 9500 Series Polypropylene Pedestal-Mount Models


9202S 105 170 6000 Pedestal mount, 316 stainless steel pump with 5⁄8" solid 416 18 lbs. stainless steel shaft and Life Guard® silicon carbide shaft seal.

Ports (NPT): 11⁄4" inlet; 1" outlet.


Ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9203S-R 140 170 6000 Pedestal mount, clockwise rotation, 316 stainless steel pump with 19 lbs. 5⁄8" solid 416 stainless steel shaft and Life Guard® silicon carbide

shaft seal. Ports (NPT): 11⁄2" inlet, 11⁄4" outlet.


Ports (NPT): 2" inlet, 11⁄2" outlet.

9200 Series Stainless Steel, Pedestal-Mount ModelsModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

9203S-SP 120 157 5500 Self-priming, pedestal mount, 316 stainless steel pump 38 lbs. with 5⁄8" solid 416 stainless steel shaft and Life Guard® silicon

carbide shaft seal. Ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9200 Series Self-Priming, Stainless Steel, Pedestal-Mount ModelsModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

9262S-C 88 124 6000 Pedestal mount, stainless steel pump with 12-volt heavy duty 27 lbs. clutch with 5” diameter A-section pulley, 416 stainless steel shaft

and Life Guard® silicon carbide shaft seal, 11⁄4" NPT inlet,

1" NPT outlet, counterclockwise rotation.

9263S-C 140 124 6000 Pedestal mount, stainless steel pump with 12-volt heavy 26 lbs. duty clutch with 5” diameter A-section pulley, (3430-0592), 416

stainless steel shaft and Life Guard® silicon carbide shaft seal,

11⁄2" NPT inlet, 11⁄4" NPT outlet, counterclockwise rotation.

9263S-CR 140 124 6000 Pedestal mount, stainless steel pump with 12-volt heavy duty 26 lbs. clutch with 5” diameter A-section pulley, (3430-0592), 416

stainless steel shaft and Life Guard® silicon carbide shaft seal,

11⁄2" NPT inlet, 11⁄4" NPT outlet, clockwise rotation.


9200 Series Stainless Steel, Pedestal-Mount Models with 12-Volt Clutch

$648.90

$702.45

$1161.25

$1182.30

$1193.85

$1413.10

$942.90

$1592.85

$1694.00

$1708.00

$70.10$242.55


1-800-640-2476

9253P-C 100 80 4200 Pedestal mount, polypropylene pump with 12-volt heavy 20 lbs. duty clutch with 51⁄4" diameter A-section pulley, 11⁄2" NPT inlet,

11⁄4" NPT outlet, counterclockwise rotation.

9553P-C 100 80 4200 Pedestal mount, polypropylene pump with 12-volt heavy 19 lbs. duty clutch with 51⁄4" diameter A-section pulley, 11⁄2" NPT inlet

11⁄4" NPT outlet, clockwise rotation.


9263C-C-SP 120 157 6000 Pedestal mount, cast iron pump with 12-volt heavy duty clutch 40 lbs. with 5" diameter A-section pulley, 11⁄2" NPT inlet, 11⁄4" NPT

outlet, counterclockwise rotation.

9263C-CR-SP 140 155 6000 Pedestal mount, cast iron pump with 12-volt heavy duty clutch 42 lbs. with 5" diameter A-section pulley, (3430-0592)

2" NPT inlet, 2" NPT outlet, clockwise rotation.

3430-0589 Life Guard® silicon carbide seal kit 3 oz.

9200 Series Polypropylene, Pedestal-Mount Models with 12-Volt Clutch

9200 Series Self-Priming Cast Iron, Pedestal-Mount Models with 12-Volt Clutch



9262C-C 88 124 6000 Pedestal mount, cast iron pump with 12-volt heavy duty clutch 25 lbs. with 5" diameter A-section pulley, 11⁄4" NPT inlet, 1" NPT


9263C-C† 140 124 6000 Pedestal mount, cast iron pump with 12-volt heavy duty clutch 25 lbs. with 5" diameter A-section pulley, 11⁄2" NPT inlet, 11⁄4" NPT


9263C-CR 140 124 6000 Pedestal mount, cast iron pump with 12-volt heavy duty clutch 25 lbs. with 5" diameter A-section pulley, (3430-0592)

11⁄2" NPT inlet, 11⁄4" NPT outlet, clockwise rotation.


9200 Series Cast Iron, Pedestal-Mount Models with 12-Volt ClutchModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

Life Guard® silicon carbide seal - Add Suffix “B” - (i.e.: 9263C-C-SP-B) - Add $123.17.

Life Guard® silicon carbide seal - Add Suffix “B” - (i.e.: 9263C-CB) - Add $123.17.† Universal flange (220 x 200) - Add Suffix “U” - (i.e.: 9263C-CU) - Add $40.00

Life Guard® silicon carbide seal - Add Suffix "B" - (i.e.: 9553P-C-B) - Add $123.17.

CENTRIFUGAL PUMPS

2526-0011 7⁄8" 5.25"-A 30 5000 4.85 9203P, 9253P-C, 9500P-S, 8 lbs.

9205C, 9205C-SP

3430-0592 5⁄8" 5.00" 30 5000 3.75 9202C, 9203C, 9204C, 9203C-R, 9 lbs. Double 9262C-C, 9263C-C, 9263C-CR,

Groove-A 9203C-SP, 9262S-C,9263S-C, 9263S-CR, 9263C-C-SP, 9263C-CR-SP

Part Shaft Pulley Max. Max. Max. AMPS For Estimated ListNumber Size Type HP RPM @ 12V Pump Model Weight Ea. Priceart For Estimated Lumber Pump Series Weight Each Price

12 Volt Clutch

$979.65

$989.10

$1000.65

$1420.65

$1432.22

$1592.85

$1329.30

$54.60$212.10

$212.10

$70.10$242.55

$1010.10

$757.05


1-800-640-2476

9302CT-GM1 63 105 2-3 gpm hydraulic gear motor/cast iron pump for open/closed 26 lbs. ,,,,,,,,center systems, ports (NPT): 11⁄4" inlet, 1" outlet.

9302C-HM1C 72 150 13 gpm hydraulic motor/cast iron pump for open/closed 26 lbs. center systems, ports (NPT): 11⁄4" inlet, 1" outlet.

9302C-HM2C 65 96 6 gpm hydraulic motor/cast iron pump for closed 26 lbs. center systems, ports (NPT): 11⁄4" inlet, 1" outlet.

9302C-HM4C 72 120 7 gpm hydraulic motor/cast iron pump, open/closed 26 lbs. center systems, ports (NPT): 11⁄4" inlet, 1" outlet.

9303C-HM1C* 114 130 13 gpm hydraulic motor/cast iron pump for open/closed 26 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4"" outlet.

9303C-HM2C 97 95 6 gpm hydraulic motor/cast iron pump for closed 26 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303C-HM3C* 125 98 24 gpm hydraulic motor/cast iron pump, large open 29 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303C-HM4C 115 93 7 gpm hydraulic motor/cast iron pump, open/closed 26 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303C-HM5C* 147 145 16 gpm hydraulic motor/cast iron pump, open/closed 26 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9305C-HM3C 182 160 19 gpm hydraulic motor/cast iron pump, large open 46 lbs. center systems, ports (NPT): 2" inlet, 11⁄2" outlet.

9306C-HM1C** 207 130 13 gpm hydraulic motor/cast iron pump, open/closed 33 lbs. center systems, ports (NPT): 2" inlet, 11⁄2" outlet.



9307C-GM10† 370 135 20 gpm hydraulic gear motor/cast iron pump for open/closed center 86 lbs. systems with Life Guard® silicon carbide seal, ports (NPT): 3" inlet,

2" outlet.

9307C-GM12† 370 135 22 gpm hydraulic gear motor/cast iron pump for open/closed center 86 lbs. systems with Life Guard® silicon carbide seal, ports (NPT): 3" inlet,

2" outlet.

3430-0332 Seal and o-ring repair kit 3 oz. 3430-0500 Seal and o-ring repair kit (9305 models) 3 oz. 3430-0589 Life Guard® silicon carbide seal kit (9302 and 9303 models) 3 oz. 3430-0601 Life Guard® silicon carbide seal kit (9305 models) 3 oz. 3430-0604 Life Guard® silicon carbide seal kit (9307 models) 3 oz.

9300 Series Cast Iron, Hydraulic Motor-Driven Models

Model Max. Max. Estimated ListNumber GPM PSI Description Weight Ea. Price

The hydraulic motor features a fixed displacement internal gear design for smooth operation. A double lip Teflon shaft seal provides excellent reliability even with high hydraulic oil back pressure. The hardened stainless steel motor/pump shaft is supported by two needle bearings and a ball bearing for dependable operation through years of use.

9263S-C-SP 120 157 Self-priming pedestal mount, stainless steel pump with 12-volt heavy duty 44 lbs. clutch with 5" diameter A-section pulley, (3430-0592), and Life Guard®

silicon carbide shaft seal, 11⁄2" NPT inlet, 11⁄4" NPT outlet,

counterclockwise rotation.


9200 Series Self-Priming, Stainless Steel, Pedestal-Mount Models with 12-Volt Clutch

Life Guard® silicon carbide seal - Add Suffix “B” - (i.e.: 9303C-HM4C-B) - Add $122.40.* Universal flange (220 x 200) - Add Suffix “U” - (i.e.: 9303C-HM3C-U) - Add $50.85.** Universal flange (220 x 220) - Add Suffix “U” - (i.e.: 9306C-HM3C-U) - Add $50.85.† Due to size and weight of pump, only truck routing is recommended. Hypro will not be responsible for damage in shipment for other transit requests.

CENTRIFUGAL PUMPS

$2721.00

$1115.10

$1115.10

$1115.10

$1115.10

$1150.80

$1150.80

$1223.00

$1150.80

$1150.80

$1949.85

$1347.15

$1420.65

$1347.15

$5637.00

$5637.00

$54.60$55.65$212.10$214.20$490.35


1-800-640-2476

In June 2006, Hypro developed and implemented proprietary software to test every hydrauliccentrifugal pump against maximum performance standards. The test is fully automated, removing the possibility of human error. Hypro's exclusive factory testing adds another level of quality control to its process and guarantees each pump’s performance before ever leavingthe factory floor. All data is stored and can be distributed to users. Currently, the data must berequested by contacting our Technical Department at 1-800-445-8360 and providing pumpmodel and serial number.

9303C-HM1C-SP 122 130 Self-priming, 13 gpm hydraulic motor/cast iron pump for 38 lbs. open/closed center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303C-HM2C-SP 104 80 Self-priming, 6 gpm hydraulic motor/cast iron pump for closed 38 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303C-HM3C-SP 120 95 Self-priming, 24 gpm hydraulic motor/cast iron pump, large open 38 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303C-HM4C-SP 99 97 Self-priming, 7 gpm hydraulic motor/cast iron pump, open/closed 38 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303C-HM5C-SP 140 140 Self-priming, 16 gpm hydraulic motor/cast iron pump, open/closed 39 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9305C-HM3C-SP 178 154 Self-priming, 19 gpm hydraulic motor/cast iron pump, large open 74 lbs. center systems, ports (NPT): 2" inlet, 2" outlet.

9305C-HM3C-BSP 178 154 Self-priming, 19 gpm hydraulic motor/cast iron pump, large open 75 lbs. center systems, ports (BSP): 2" inlet, 2" outlet.

3430-0589 Life Guard® silicon carbide seal kit (9303 models) 3 oz. 3430-0601 Life Guard® silicon carbide seal kit (9305 models) 3 oz. 3430-0480SP Self-Priming chamber kits (9303 models) 21 lbs. 3430-0481SP Self-Priming chamber kits (9305 models) 37 lbs.

9300 Series Self-Priming, Cast Iron, Hydraulic Motor-Driven ModelsModel Max. Max. Estimated ListNumber GPM PSI Description Weight Ea. Price

9303P-HM1C 110 130 13 gpm hydraulic motor/polypropylene pump for open/closed 20 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303P-HM2C 82 95 6 gpm hydraulic motor/polypropylene pump for closed 19 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303P-HM3C 110 93 24 gpm hydraulic motor/polypropylene pump, large open 21 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303P-HM4C 82 85 7 gpm hydraulic motor/polypropylene pump, open/closed 19 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.

9303P-HM5C 116 120 16 gpm hydraulic motor/polypropylene pump, open/closed 20 lbs. center systems, ports (NPT): 11⁄2" inlet, 11⁄4" outlet.


9300 Series Polypropylene, Hydraulic Motor-Driven Models

Hydraulic-Driven Pump Testing


Life Guard® silicon carbide seal - Add Suffix “B” - (i.e.: 9303C-HM4C-B-SP) - Add $122.40.

Life Guard® silicon carbide seal - Add Suffix “B” - (i.e.: 9303P-HM4C-B) - Add $122.40.

CENTRIFUGAL PUMPS

$1568.85

$1568.85

$1642.25

$1568.85

$1568.85

$2667.00

$2667.00

$1202.25

$1202.25

$1274.70

$1202.25

$1202.25

$212.10$214.20$318.50$1630.65

$74.55$232.05


1-800-640-2476

9300 Series Stainless Steel, Hydraulic Motor-Driven ModelsModel Max. Max. Estimated ListNumber GPM PSI Description Weight Ea. Price

9302ST-GM1 63 105 2-3 gpm hydraulic gear motor/316 stainless steel pump with 416 26 lbs. stainless steel shaft and Life Guard® silicon carbide seals. 11⁄4" NPTinlet, 1" NPT outlet.

9302S-HM1C 72 150 13 gpm hydraulic motor/316 stainless steel pump for open/closed center 26 lbs. systems with 416 stainless steel shaft and Life Guard® silicon carbide seals.11⁄4" NPT inlet, 1" NPT outlet.



9303S-HM1C 114 130 13 gpm hydraulic motor/316 stainless steel pump for open/closed center 28 lbs. systems with 416 stainless steel shaft and Life Guard® silicon carbide seals.11⁄2" NPT inlet, 11⁄4" NPT outlet.





9306S-HM1C 207 130 13 gpm hydraulic motor/316 stainless steel pump for open/closed center 35 lbs. systems with 416 stainless steel shaft and Life Guard® silicon carbideseals. 2" NPT inlet, 11⁄2" NPT outlet.

9306S-HM3C 214 135 24 gpm hydraulic motor/316 stainless steel pump for open/closed center 38 lbs. systems with 416 stainless steel shaft and Life Guard® silicon carbide seals. 2" NPT inlet, 11⁄2" NPT outlet.

9306S-HM5C 212 140 17 gpm hydraulic motor/316 stainless steel pump for open/closed center 35 lbs. systems with 416 stainless steel shaft and Life Guard® silicon carbide seals. 2" NPT inlet, 11⁄2" NPT outlet.

9300 Series Self-Priming, Stainless Steel, Hydraulic Motor-Driven ModelsModel Max. Max. Estimated ListNumber GPM PSI Description Weight Ea. Price

9303S-HM1C-SP 114 130 Self-priming, 13 gpm hydraulic motor/316 stainless steel pump 42 lbs. for open/closed center systems with 416 stainless steel shaft and

Life Guard® silicon carbide seals. 11⁄2" NPT inlet, 11⁄4" NPT outlet.






Life Guard® silicon carbide seals.11⁄2" NPT inlet, 11⁄4" NPT outlet.



CENTRIFUGAL PUMPS

$2055.90

$2055.90

$2055.90

$2055.90

$2109.45

$2109.45

$2186.10

$2109.45

$2109.45

$2494.80

$2571.45

$2494.80

$3123.75

$3123.75

$3199.35

$3123.75

$3123.75


1-800-640-2476

1200C 74.0 150 800 Cast iron 4-roller pump with Super Rollers, 32 lbs. Buna-N seals, 11⁄2" NPT ports, and a 1" solid shaft.

3430-0207 Locking collar kit for model 1200C 8 oz.

Roller/Gear Pumps and Accessories

1700C 45.0 200 1000 Cast iron 5-roller pump with Super Rollers, 20 lbs. Viton seals, 1" NPT ports, and 15⁄16" solid shaft.

1700N 45.0 200 1000 Ni-Resist 5-roller pump with Super Rollers, 21 lbs. Viton seals, 1" NPT ports, and 15⁄16" solid shaft.

1700XL 45.0 200 1000 SilverCast 5-roller pump with Super Rollers, 21 lbs. Viton seals, 1" NPT ports, and 15⁄16" solid shaft.


1200 Series Roller Pump


1500 Series Roller Pumps



† The maximum recommended operating pressure is 100 psi for pumps fitted with Buna-N or Teflon rollers.

†† Rotation, clockwise or counterclockwise, is determined when looking at theshaft end of the pump. Standard rotation for all roller pumps is counterclockwise,except 4000 series.

1502C 62.1 150 1000 Cast iron 6-roller pump with Super Rollers, 25 lbs. Buna-N seals, 11⁄2" NPT ports, and 15⁄16" solid shaft.

1502N 62.1 150 1000 Ni-Resist 6-roller pump with Super Rollers, 26 lbs. Buna-N seals, 11⁄2" NPT ports, and 15⁄16" solid shaft.

1502XL 62.1 150 1000 SilverCast 6-roller pump with Super Rollers, 26 lbs. Viton seals, 11⁄2" NPT ports, and 15⁄16" solid shaft.

Teflon rollers† - Add Suffix “T2” - (i.e.: 1502C-T2) - Add $81.36.Polypropylene rollers - Add Suffix “T3” - (i.e.: 1502C-T3) - No additional charge.Viton seals - Add Suffix “Q” - (i.e.: 1502C-Q) - Add $7.91.Reverse rotation†† - Add Suffix “R” - (i.e.: 1502C-R) - Add $ 10.17.

Teflon rollers† - Add Suffix “T2” - (i.e.: 1700C-T2) - Add $65.80. Polypropylene rollers - Add Suffix “T3” - (i.e.: 1700C-T3) - No additional charge.

Reverse rotation†† - Add Suffix “R” - (i.e.: 1700C-R) - Add $10.17.

All Hypro roller pumps need either an adapter or quick coupler

Polypropylene rollers - Add Suffix “T3” - (i.e.: 1200C-T3) - No additional charge.Reverse rotation†† - Add Suffix “R” - (i.e.: 1200C-R Add $11.30

$689.85

$1141.35

$1573.95

$448.35

$929.25

$1255.80

Call$47.77


1-800-640-2476

4001C 9.1 150 1800 Cast iron 4-roller pump with Super Rollers, Viton seals, 5 lbs. 3⁄4" NPT ports, and 5⁄8" solid shaft.

4001C-H 9.1 150 1800 4001C-A pump with 1⁄2" hollow shaft. 5 lbs. 4001N 9.1 150 1800 Ni-Resist 4-roller pump with Super Rollers, Viton seals; 5 lbs.

3⁄4" NPT ports, and 5⁄8" solid shaft.

4001N-H 9.1 150 1800 4001N-A pump with 1⁄2" hollow shaft. 5 lbs. 4001XL 9.1 150 1800 SilverCast 4-roller pump with Super Rollers Viton seals, 5 lbs.


4001XL-H 9.1 150 1800 SilverCast 4001XL-A pump with 1⁄2" hollow shaft. 5 lbs.

4001 Series Roller PumpsModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

4001N-EH 10.4 30 1900 12 Volt DC motor-driven, Ni-resist, 4-roller pump with Super Rollers, 20 lbs. Viton seals, 3⁄4" NPT ports, 1⁄2" hollow shaft.

4001N-E2H 9.9 50 1600 12 Volt DC motor-driven, Ni-resist, 4-roller pump with Super Rollers, 22 lbs. Viton seals, 3⁄4" NPT ports, 1⁄2" hollow shaft. Designed for

higher pressures.

4001XL-EH 10.4 30 1900 12 Volt DC motor-driven, Silver Cast, 4-roller pump with Super 20 lbs. Rollers, Viton seals, 3⁄4" NPT ports, 1⁄2" hollow shaft.

4001XL-E2H 9.9 50 1600 12 Volt DC motor-driven, Silver Cast, 4-roller pump with Super 22 lbs. Rollers, Viton seals, 3⁄4" NPT ports, 1⁄2" hollow shaft. Designed for

higher pressures.

4001 Series Roller Pumps with 12 Volt DC MotorModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

* Rotation, clockwise or counterclockwise, is determined when looking at the shaftend of the pump. Standard rotation for all Series 4000 roller pumps is clockwise.

Consult performance tables for operating pressure and volume.

Teflon rollers - Add Suffix “T2” - (i.e.: 4001C-T2) - Add $ 27.12. Polypropylene rollers - Add Suffix “T3” - (i.e.: 4001C-T3) - No additional charge.

Reverse rotation* - Add Suffix “R” - (i.e.: 4001C-R) - Add $9.04.

Teflon rollers - Add Suffix “T2” - (i.e.: 4001N-EHT2) - Add $ 27.12.Polypropylene rollers - Add Suffix “T3” - (i.e.: 4001N-EHT3) - No additional charge.

$215.25

$233.10

$372.75

$391.65

$552.30

$569.10

$804.30

$893.55

$984.90

$1074.15


1-800-640-2476

Teflon rollers - Add Suffix “T2” - (i.e.: 4101N-EHT2) - Add $27.12Polypropylene rollers - Add Suffix “T3” - (i.e.: 4101N-EHT3) - No additional charge.


4101C-H 7.2 150 2600 4101C-A pump with 1⁄2" hollow shaft. 5 lbs.

4101N 7.2 150 2600 Ni-Resist 4-roller pump with Super Rollers, Viton seals, 5 lbs. 3⁄4" NPT ports, and 5⁄8" solid shaft.

4101N-H 7.2 150 2600 4101N-A pump with 1⁄2" hollow shaft. 5 lbs.

4101XL 7.2 150 2600 SilverCast 4-roller pump with Super Rollers, Viton seals, 5 lbs. 4101XL-H 7.2 150 2600 SilverCast 4101XL-A pump with 1⁄2" hollow shaft. 5 lbs.

4101 Series Roller PumpsModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

4101N-EH 7.5 50 1900 12 Volt DC motor-driven, Ni-Resist, 4-roller pump with Super 20 lbs. Rollers, Viton seals, 3⁄4" ports, 1⁄2" hollow shaft.

4101N-E2H 5.9 90 1600 12 Volt DC motor-driven, Ni-Resist, 4-roller pump with Super 22 lbs. Rollers, Viton seals, 3⁄4" ports, 1⁄2" hollow shaft. Designed for

higher pressures.

4101XL-EH 7.5 50 1900 SilverCast, 12 Volt DC motor-driven, 4-roller pump with Super 19 lbs. Rollers, Viton seals, 3⁄4" ports, 1⁄2" hollow shaft.

4101XL-E2H 5.9 90 1600 SilverCast, 12 Volt DC motor-driven, 4-roller pump with Super 22 lbs. Rollers, Viton seals, 3⁄4" ports, 1⁄2" hollow shaft. Designed for

higher pressures.

4101 Series Roller Pumps with 12 Volt DC Motor


Teflon rollers - Add Suffix “T2” - (i.e.: 4101C-T2) - Add $ 27.12.

Polypropylene rollers - Add Suffix “T3” - (i.e.: 4101C-T3) - No additional charge.Reverse rotation - Add Suffix “R” - (i.e.: 4101C-R) - Add $ 9.04.

4101C-25 8.9 100 Cast iron 4 roller pump with Super Rollers, Viton seals, and 3⁄4" NPT 28 lbs. $ ports powered by 2.5 hp PowerPro™ gas engine.

4101XL-25 8.9 150 SilverCast 4 roller pump with Super Rollers, Viton seals, and 3⁄4" NPT 29 lbs. ports powered by 2.5 hp PowerPro™ gas engine.

4101 Series Roller Pumps with PowerPro ™ Gas EngineModel Max. Max. Estimated ListNumber GPM PSI Description Weight Ea. Price

4101C 7.2 150 2600 Cast iron 4-roller pump with Super Rollers, Viton seals, 5 lbs. $201.60

218.40

360.15

376.95537.60556.50

$792.75

$880.95

$972.30

$1060.50

709.80

$1055.25


1-800-640-2476







Teflon rollers - Add Suffix “T2” - (i.e.: 6500C-T2) - Add $ 50.85.Polypropylene rollers - Add Suffix “T3” - (i.e.: 6500C-T3) - No additional charge.Reverse rotation †† - Add Suffix “R” - (i.e.: 6500C-R) - Add $10.17.

Teflon rollers - Add Suffix “T2” - (i.e.: 7560C-T2) - Add $ 68.93.

Polypropylene rollers - Add Suffix “T3” - (i.e.: 7560C-T3) - No additional charge.Reverse rotation † - Add Suffix “R” - (i.e.: 7560C-R) - Add $ 9.04.

Teflon rollers - Add Suf fix “T2” - (i.e.: 7700C-T2) - Add $ 59.89. Polypropylene rollers - Add Suffix “T3” - (i.e.: 7700C-T3) - No additional charge. Reverse rotation †† - Add Suffix “R” - (i.e.: 7700C-R) - Add $9.00

Viton seals, 3⁄4" NPT ports, and 5⁄8" solid shaft.

6500N 21.8 300 1200 8 lbs.

6500XL 21.8 300 1200 SilverCast 6-roller pump with Super Rollers, Super Rotor, 8 lbs. Viton seals, 3⁄4" NPT ports, and 5⁄8" solid shaft.

7560C 22.5 300 1000 Cast iron 8-roller pump with Super Rollers, Super Rotor, 11 lbs. Viton seals, 3⁄4" NPT ports, and 15⁄16" solid shaft.

7560N 22.5 300 1000 Ni-Resist 8-roller pump with Super Rollers, Super Rotor, 12 lbs. Viton seals, 3⁄4" NPT ports, and 15⁄16" solid shaft.


7560C-GM30 20.1 300 1000 Same as 7560C, coupled to an SAE 2 bolt A flanged, 33 lbs. low speed, high torque hydraulic motor. 3 cubic inch

motor displacement,12 gpm hydraulic flow max.

7560N-GM30 20.1 300 1000 Same as 7560N, coupled to an SAE 2 bolt A flanged, 33 lbs. low speed, high torque hydraulic motor. 3 cubic inch


7560XL-GM30 20.1 300 1000 Same as 7560XL, coupled to an SAE 2 bolt A flanged, 33 lbs. low speed, high torque hydraulic motor. 3 cubic inch


7700C 22.1 200 800 Cast iron 7-roller pump with Super Rollers, Super Rotor, 12 lbs. Viton seals, 3⁄4" NPT ports, and 15⁄16" solid shaft.

7700N 22.1 200 800 Ni-Resist 7-roller pump with Super Rollers, Super Rotor, 12 lbs. Viton seals, 3⁄4" NPT ports, and 15⁄16" solid shaft.


6500C 21.8 300 1200 Cast iron 6-roller pump with Super Rollers, Super Rotor, 8 lbs.

NiCast 6-roller pump with Super Rollers, Super Roter,Viton seals. 3/4" NPT ports and 5/8" solid shaft

$217.35

$493.50

$695.10

$285.60

$563.85

$827.40

$1259.95

$1981.35

$1667.00

$299.25

$563.85

$847.35


1-800-640-2476

1320-0015 3⁄4" 5⁄8" steel * 4000, 6500 1320-0016 5⁄8" 5⁄8" steel * 4000, 6500 1320-0022 13⁄8" (6 spline) 5⁄8" die cast 540 6500 1320-0033 13⁄8" (6 spline) 15⁄16" die cast 540 1500, 1700, 7560, 7700 1320-0038 13⁄8" (21 spline) 15⁄16" die cast 1000 1500, 1700, 7560 1320-0053 13⁄8" (21 spline) 5⁄8" die cast 1000 4000, 6500 1320-0054 3⁄4" 15⁄16" die cast * 1500, 1700, 7560, 7700 1320-0059 13⁄8" (6 spline) 1" die cast 540 1200

1320-0076 13⁄8" (6 spline) 15⁄16" forged steel 540 1500, 1700, 7560, 7700 1320-0077 13⁄8" (6 spline) 5⁄8" forged steel 540 6500 1320-0078 13⁄8" (21 spline) 15⁄16" forged steel 1000 1500, 1700, 7560 1320-0079 13⁄8" (21 spline) 5⁄8" forged steel 1000 4000, 6500 1320-0080 13⁄4" (20 spline) 15⁄16" forged steel 1000 1500, 1700, 7560 1320-0081 13⁄8" (6 spline) 1" forged steel 540 1200

1321-0006 13⁄8" (6 spline) 5⁄8" die cast 540 6500

1321-0007 13⁄8" (6 spline) 15⁄16" die cast 540 1500, 1700, 7560, 7700 1321-0008 13⁄8" (21 spline) 5⁄8" die cast 1000 4000, 6500 1321-0009 13⁄8" (21 spline) 15⁄16" die cast 1000 1500, 1700, 7560 1321-0012 13⁄8" (multi-speed) 5⁄8" die cast 540/1000 4000, 6500 1321-0013 13⁄8" (multi-speed) 15⁄16" die cast 540/1000 1500, 1700, 7560, 7700

1323-0072 13⁄8" (6 spline) 15⁄16" forged steel 540 1500, 1700, 7560, 7700 1323-0073 13⁄8" (21 spline) 15⁄16" forged steel 1000 1500, 1700, 7560 1323-0074 13⁄8" (6 spline) 5⁄8" forged steel 540 6500 1323-0075 13⁄8" (21 spline) 5⁄8" forged steel 1000 4000, 6500 1323-0076 13⁄8" (multi-speed) 15⁄16" forged steel 540/1000 1500, 1700, 7560, 7700 1323-0077 13⁄8" (multi-speed) 5⁄8" forged steel 540/1000 4000, 6500

Adapters for PTO and Gas Engine Adaption (Female to Female)

Quick Couplers (Female to Female)

Part Pump End For Pump List Number PTO (I.D.) (I.D.) Material RPM Series Price

* Refer to the recommended pump rpm.

Part Pump End For Pump List Number PTO (I.D.) (I.D.) Material RPM Series Price

3430-0387 1502C and 1502N Roller kit includes: 6 Super Rollers, 1 o-ring gasket, and 2 Buna-N seals 1 lb. 7 oz.

3430-0386 1502XL Roller kit includes: 6 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 1 lb. 8 oz.

3430-0437 1700 Roller kit includes: 5 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 1 lb. 5 oz.

3430-0380 6500 Roller kit includes: 6 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 8 oz.

3430-0381 7560/7700 Roller kit includes: 8 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 12 oz.

3430-0390 4001/4101 Roller kit includes: 4 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 3 oz.

Roller and Rotor Repair KitsKit For Pump Estimated ListNumber Series Description Weight Ea. Price

$40.42$39.11$23.88$34.91$45.93$35.96$54.86Call

$41.73$40.16$50.66$39.11$76.12$77.96

$47.25$51.45$57.48$56.17$46.46$49.35$60.11$65.10$59.58$60.11$60.11$60.11

$79.27

$81.90

$72.97$42.52

$61.68

$36.22


1-800-640-2476

9910-KIT1640* 9910-D30, D303 6:1 gear box for standard 5.5 hp 8 lbs. and D403 gas engine with 3⁄4" shaft.

9910-KIT1642 9910-D50, D503, 6:1 gear box for standard 8-18 hp 9 lbs. D813, D1064 and D1265 gas engine with 1" shaft.

8000-0056 D30, D303, D403, 6:1 gear box for standard 5.5 hp 9 lbs. D50 and D503 or 6.5 hp gas engine with 3⁄4" shaft.

Gear Reduction KitsKit For Pump Estimated ListNumber Model Description Weight Ea. Price

*This kit can also be used with 9910-D50, D503 and D813, providing that pumps are operated at lower pressures that do not exceed 5.5 hpgas engine capability.

9910-HYD5312 9910-D30, D303, D403, D50, D503, Kit includes one flange with SAE 6 lbs. D813, D1064 and D1265 "A" 2-bolt hydraulic motor mount,

one 1" hollow shaft and hardware

for mounting.

9910-HYD1570 9910-D160 and D250 Kit includes one flange with SAE 6 lbs. "A" 2-bolt hydraulic motor mount,

one coupling and hardware for

mounting. Hollow 1" shaft 1⁄4" keyed.

9910-HYD2495 9910-D70, D115, D135, D160 and Kit includes one flange with SAE 2 lbs. 4 oz. D250 "A" 2-bolt hydraulic motor mount,

one coupling, two pins and spacer

for D135. Hollow 1" shaft 1⁄4" keyed.

9910-KIT1703 9910-D30 2 lbs. 5 oz. 9910-KIT1707 9910-D50 Male shaft adapter, 3 lbs. 10 oz. 9910-KIT1711 9910-D70 and D115 mounting bracket and 6 lbs. 9910-KIT2202 9910-D503, D303 and D403 necessary hardware. 1 lb. 6 oz. 9910-KIT2203 9910-D813, D1064, D1265 1 lb. 9 oz.

9910-KIT1704 9910-D50, D30, D303 and D403 Female PTO coupler and retaining 7 lbs. 9910-KIT1708 9910-D70 and D115 clamp, torque arm and mounting 6 lbs. 9910-KIT2204 9910-D503, D813, D1064 and D1265 bracket, chains, and necessary 7 lbs.

hardware.

9910-KIT1702 9910-D30 3 lbs. 9910-KIT1706 9910-D50 Male PTO shaft adapter, 4 lbs. 6 oz. 9910-KIT1710 9910-D70 and D115 mounting bracket and 6 lbs. 9910-KIT2200 9910-D503, D303 and D403 necessary hardware. 2 lbs. 2 oz. 9910-KIT2201 9910-D813, D1064, D1265 2 lbs. 4 oz.

13⁄8" 6 Spline PTO Shaft Kits

1" Solid Shaft Kits

Hydraulic Motor Mounting Flange Kits

Kit For Pump Estimated ListNumber Model Description Weight Ea. Price



New!

$317.10

$940.80

$697.20

$317.10$288.75$286.65

$190.05$236.25$334.19$171.15$171.15

$190.05$236.25$333.90$171.15$171.15

$315.00

$402.15

$315.00


1-800-640-2476

For PumpModel

Diaphragm Kit(Desmopan)

Diaphragm Kit(Buna-N)

Valve Kit O-ring Kit

9910-D709910-KIT1720

$ 129.159910-KIT2364

$ 202.659910-KIT2365

$ 21.78

9910-D115and D135

9910-KIT1721 $ 182.70

9910-KIT2370 $ 302.40

9910-KIT2026 $ 26.25

9910-D1609910-KIT1730

$ 226.809910-KIT2374

$ 400.059910-KIT1908

$ 45.41

9910-D2509910-KIT1722

$ 325.509910-KIT2114

$ 599.559910-KIT1904

$ 51.18

9910-D12GRGI9910-KIT1882

$ 72.719910-KIT1992

$ 112.35

9910-D5039910-KIT1881

$ 106.059910-KIT1987

$ 283.509910-KIT1984

$ 43.31

9910-D252(all versions)

9910-KIT1723 $ 84.26

9910-KIT2408 $ 64.83

9910-KIT2409 $ 15.48

9910-D30(all versions)

9910-KIT1724 $ 107.10

9910-KIT2110 $ 106.05

9910-KIT1917 $ 172.20

9910-KIT1916 $ 58.53

9910-D509910-KIT1725

$ 143.859910-KIT2111

$ 132.309910-KIT1920

$ 195.309910-KIT1919

$ 50.13

9910-DBS110, DBS140, DBA110 and DBA140

9910-KIT2444 $ 117.60

9910-KIT2445 $ 261.45

9910-KIT2446 $ 29.40

9910-DBS160, DBS200, DBA160 and DBA200

9910-KIT2456 $ 156.45

9910-KIT2374 $ 400.05

9910-KIT2457 $ 32.28

9910-D3039910-KIT2423

$ 69.829910-KIT2388

$ 162.759910-KIT2389

$ 19.68

9910-D4039910-KIT2423

$ 69.829910-KIT2388

$ 162.759910-KIT2389

$ 19.68

9910-D8139910-KIT2479

$ 136.509910-KIT1963

$ 266.709910-KIT2376

$ 69.82

9910-D10649910-KIT2480

$ 162.759910-KIT1964

$ 352.809910-KIT2378

$ 86.10

9910-D12659910-KIT2100

$ 297.159910-KIT2024

$ 331.809910-KIT2347

$ 56.70

9910-D15549910-KIT1734

$ 281.409910-KIT1965

$ 477.759910-KIT1972

$ 310.80

9910-D15169910-KIT2113

$ 264.609910-KIT2053

$ 423.159910-KIT2349

$ 67.20

Diaphragm Pump Repair Kits


1-800-640-2476

Piston Pumps

5315C-HX Cast iron pumps with torque arm, 5⁄8" ID hollow shaft, $ 505.705315C-HRX 1.5 500 1800 1⁄2" NPT ports, 140˚F maximum temp. Cup material: 10 lbs. 505.705315C-CHX HX (leather), HRX (Buna-N), CHX (Teflon). 539.70 5320C-HX Cast iron pumps with torque arm, 5⁄8" ID hollow shaft, 505.055320C-HRX 2.2 500 1800 1⁄2" NPT ports, 140˚F maximum temp. Cup material: 10 lbs. 505.055320C-CHX HX (leather), HRX (Buna-N), CHX (Teflon). 539.705325C-HX Cast iron pumps with torque arm, 5⁄8" ID hollow shaft, 505.055325C-HRX 2.5 500 1800 1⁄2" NPT ports, 140˚F maximum temp. Cup material: 10 lbs. 505.055325C-CHX HX (leather), HRX (Buna-N), CHX (Teflon). 539.705330C-HX Cast iron pumps with torque arm, 5⁄8" ID hollow shaft, 505.055330C-HRX 3.0 500 1800 1⁄2" NPT ports, 140˚F maximum temp. Cup material: 10 lbs. 505.055330C-CHX HX (leather), HRX (Buna-N), CHX (Teflon). 539.70

5206C 8.0 600 800 Cast iron pump with leather cups and Ni-Resist sleeves, 18 lbs. 1" solid shaft with base, 3⁄4" ports, 140˚F maximum temp.

5206C-H 8.0 400 800 Cast iron pump with leather cups and Ni-Resist sleeves, 18 lbs. 13⁄8" hollow shaft w/base, 3⁄4" ports, 140˚F maximum temp.

5210C 10.0 400 600 Cast iron pump with leather cups and Ni-Resist sleeves, 18 lbs. 1" solid shaft with base 3⁄4", ports, 140˚F maximum temp.

5210C-H 10.0 400 600 Cast iron pump with leather cups and Ni-Resist sleeves, 18 lbs. 13⁄8" hollow shaft w/base, 3⁄4" ports, 140˚F maximum temp.

3430-0037 Leather cup kit. 3 oz.

5200 Series Big Twin® Piston Pumps

5300 Series Small Twin® Piston Pumps with Hollow Shaft


Fabric Cups - Add Suffix “F” - (ie.: 5206C-F) - Add $ 14.79.Buna-N Cups - Add Suffix “R” - (ie.: 5206C-R) - Add $ 14.79.Model Estimated ListNumber GPM PSI RPM

5315C-X Cast iron pumps with base, 5⁄8" OD solid shaft, $ 505.705315C-RX 1.5 500 1800 1⁄2" NPT ports, 140˚ F maximum temp. 10 lbs. 505.705315C-CX Cup material: X (leather), RX (Buna-N), CX (Teflon). 539.705320C-X Cast iron pumps with base, 5⁄8" OD solid shaft, 505.055320C-RX 2.2 500 1800 1⁄2" NPT ports, 140˚ F maximum temp. 10 lbs. 505.05

5320C-CX Cup material: X (leather), RX (Buna-N), CX (Teflon). 539.705325C-X Cast iron pumps with base, 5⁄8" OD solid shaft, 505.055325C-RX 2.5 500 1800 1⁄2" NPT ports, 140˚ F maximum temp. 10 lbs. 505.05 5325C-CX Cup material: X (leather), RX (Buna-N), CX (Teflon). 539.705330C-X Cast iron pumps with base, 5⁄8" OD solid shaft, 505.055330C-RX 3.0 500 1800 1⁄2" NPT ports, 140˚F maximum temp. 10 lbs. 505.055330C-CX Cup material: X (leather), RX (Buna-N), CX (Teflon). 539.70

5300 Series Small Twin® Piston Pumps with Solid ShaftModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

$884.00

$884.10

$884.10

$884.10


1-800-640-2476

9910-D70 19 290 550 2 - diaphragm pump - 11⁄4" HB inlet, 1" HB outlet. 25 lbs.

Select shaft kit for desired drive.

9910-D70GR 19 290 3600 2 - diaphragm pump - 3⁄4" hollow shaft with gear reduction 31 lbs.

for 5 hp gasoline engine

9910-D115 30.1 290 550 3 - diaphragm pump - 11⁄2" HB inlet, 1" HB outlet. 33 lbs.

Select shaft kit for desired drive.

9910-D115GR34 30.1 290 3600 3 - diaphragm pump - 3⁄4" hollow shaft with gear reduction 41 lbs.

for 5 hp gasoline engine

9910-D135 34.8 290 550 3 - diaphragm pump - 11⁄2" HB inlet,1" HB outlet. 38 lbs.

13⁄8"-6 splined male shaft.

9910-D160† 42.5 290 550 4 - diaphragm pump - 2" HB inlet, 11⁄2" HB outlet. 66 lbs.


9910-D250† 66 290 550 6 - diaphragm pump - 2" HB inlet, 11⁄2" HB outlet. 89 lbs.


Diaphragm Pumps and Accessories Low Pressure Diaphragm Pumps


Control units, shaft kits, gear boxes and repair kits available; see pages 60-61 for pricing.† Due to size and weight of pump, only truck routing is recommended. Hypro will not be responsible for damage in shipment for other transit requests.

Medium Pressure Diaphragm PumpsModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

9910-D252 6.1 290 650 2 - diaphragm pump - 3⁄4" HB inlet, 1⁄2" NPT outlet, 12 lbs. 3⁄4" solid keyed shaft.

9910-D252GRGI 6.1 290 2800 2 - diaphragm (semi-hydraulic) pump - 3⁄4" HB inlet; 14 lbs. 3⁄8" HB outlet. 3⁄4" hollow shaft, gear reduced for

2-3.5 hp gas engine and 9910-KIT1990 control unit.

9910-D252GRGI58 5.5 290 3600 2 - diaphragm (semi-hydraulic) pump - 3⁄4" HB inlet; 14 lbs. $3⁄8" HB outlet. 5⁄8" hollow shaft, gear reduced for

2-3.5 hp gas engine and 9910-KIT1990 control unit.

9910-D252GRGIAP 6.1 290 2800 2 - diaphragm (semi-hydraulic) pump - 3⁄4" HB inlet; 14 lbs. 3⁄8" HB outlet. 3⁄4" hollow shaft with a 5⁄8" output shaft, gear reduced

for 3 hp gas engine and 9910-KIT1990 control unit.

9910-D30 9.0 580 550 2 - diaphragm pump - 1" HB inlet, 1⁄2" HB outlet. 23 lbs.

9910-D30AP-A 24 lbs. Same pump as 9910-D30 with 3⁄4" solid thru shaft. Select shaft kit with base or gear reduction.

9910-D30GRGI 9.0 580 3600 2 - diaphragm pump - assembled with gearbox 9910-KIT1640 33 lbs. and control 9910-GR40 for mounting on 5 hp gas engine.

9910-D30-B-GRGI Same pump as 9910-D30GRGI with Buna-N diaphragms. 32 lbs.



9910-D403GRGI 10.6 580 3600 3 - diaphragm pump - assembled with gearbox 9910-KIT1640 32 lbs.

Model Max. Max. Max. ListNumber GPM PSI RPM Description Price

9910-DP423 11 290 550 3 - diaphragm poly pump- 1 1/4" HB inlet, 1" HB outlet

9910-DP423GRGI 11 290 3600 3 - diaphragm poly pump- assembled, with gearbox & control 9910-GS25for mounting on 6.5 hp gas engines

9910-GS25 11 290 Control unit includes relief valve, pressure gauge, two HB outlets and 3/4 HB bypass

Poly Diaphragm Pump Series

-B With BUNA-N

$973.60

$1620.00

$1461.60

$1959.20

$1576.00

$2590.04

$3263.20

$1133.60

$1700.80

$309.75

$701.60

$971.20

$971.20

$971.20

$877.60

$936.00

$1573.60

$1573.60$907.20$907.20

$1652.00


1-800-640-2476

High Pressure Diaphragm PumpsModel Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

9910-D813 21.4 725 550 3 - diaphragm pump - 11⁄4" HB inlet, 3⁄4" NPT outlet. Select 51 lbs. shaft kit or gearbox. 13⁄8"-6 splined male shaft extension.

9910-D813GRGI† 21.4 725 3600 3 - diaphragm pump - assembled with gearbox 9910-KIT1642 66 lbs. and control 9910-VDR50 for mounting on 11 hp gas engines.

9910-D1064† 27.9 725 550 4 - diaphragm pump - 11⁄2" HB inlet, 3⁄4" NPT outlet. Select 56 lbs. shaft kit or gearbox. 13⁄8"-6 splined male shaft extension.

9910-D1064GRGI† 27.9 725 3600 4 - diaphragm pump - assembled with gearbox 9910-KIT1642 75 lbs. and control 9910-VDR50 for mounting on 18 hp gas engines.

9910-D1265† 33.3 725 550 5 - diaphragm pump - 11⁄2" HB inlet, 3⁄4" NPT outlet. 67 lbs. 13⁄8" - 6 splined male shaft extension, select shaft kit or gearbox

9910-D1516† 39.8 725 550 6 - diaphragm pump - 11⁄2" HB inlet and 78 lbs. 3⁄4" NPT outlet. 13⁄8" 6-splined male shaft extension.

Control units, shaft kits, gear boxes and repair kits available; †Due to size and weight of pump, only truck routing is recommended. Hypro will not be responsible for damage in shipment for other transit requests.

Medium Pressure Diaphragm Pumps (continued)Model Max. Max. Max. Estimated ListNumber GPM PSI RPM Description Weight Ea. Price

and control 9910-RM40 for mounting on 5-61⁄2 hp gas engines.

Control units, shaft kits, gear boxes and repair kits available;

9910-D50 14.0 580 550 2 - diaphragm pump - 11⁄4" HB inlet, 1⁄2" HB outlet. 35 lbs. 9910-D50-B 14.0 580 550 Same Pump as 9910-D50 with Buna-N diaphragms. 35 lbs. 9910-D50AP-A Same pump as 9910-D50 with solid thru shaft. Select shaft kit with base or gear reduction. 37 lbs. 9910-D503 15.0 580 550 3 - diaphragm pump - 11⁄4" HB inlet, 3⁄4" NPT outlet. 28 lbs.

Select shaft kit or gearbox.

9910-D503GRGI 15.0 580 3600 3 - diaphragm pump - assembled with gearbox 9910-KIT1642 41 lbs. and control 9910-RM40 for mounting on 8 hp gas engines.

9910-D503GRGI34 15.0 580 3600 3 - diaphragm pump - assembled with gearbox 9910-KIT1640 40 lbs.

$1242.40$1242.40$1301.60

$1242.40

$2108.00

$1986.40

$1547.20

$2648.80

$1752.80

$2853.60

$2656.80

Call


1-800-640-2476

PowerPro™ Gasoline EnginesHigh Quality, Field-Proven Engine

2.5 HP

13 HP Electric Start

8

• Available in multiple horsepower options to suit adiverse range of agricultural, industrial, and lawn & gardenapplications

• Electric-start option available for quick start-up

• Dual-element air filter provides highest degree of filtering

• Cast iron cylinder sleeve for commercial use

• Overhead valve for cleaner operation on most models;flat head on 2.5 HP

• Equipped with a robust low-oil sensor to preventengine damage

• Choose between CARB/EPA certified or EPA onlycertified engines

• Engines can be configured to various Hypro pumpmodels or purchased individually

• Supported with a one-year warranty from Hypro;repair parts available for easy servicing

Part Estimated List

Number HP Description Weight Ea. Price2549-0043 2.5 Power ProTM gas engine with 5/8" keyed shaft. Equipped with low-oil sensor to prevent 23 lbs.

engine damage.2549-0044 2.5 Power ProTM gas engine with 5/8" keyed shaft. Equipped with low-oil sensor to prevent 23 lbs.

engine damage. EPA only.2541-0045 6.5 Power ProTM gas engine with 3/4" keyed shaft. Equipped with overhead valve for cleaner 40 lbs.

operation and low-oil sensor to prevent engine damage.2541-0053 6.5 Power ProTM gas engine with 3/4" keyed shaft, electric start. Equipped with overhead 40 lbs.

valve for cleaner operation and low-oil sensor to prevent engine damage.2541-0046 6.5 Power ProTM gas engine with 5/8" keyed shaft. Equipped with overhead valve for cleaner 40 lbs.

operation and low-oil sensor to prevent engine damage.2541-0055 6.5 Power ProTM gas engine with 5/8" threaded shaft, electric start. Equipped with overhead 40 lbs.

valve for cleaner operation and low-oil sensor to prevent engine damage.2541-0054 6.5 Power ProTM gas engine with 5/8" threaded shaft, 2: 1 chain reduction drive - electric 40 lbs.

start. Equipped with overhead valve for cleaner operation and low-oil sensor to preventengine damage.

2541-0047 9 Power ProTM gas engine with 1" keyed shaft. Equipped with overhead valve for cleaner 58 lbs.operation and low-oil sensor to prevent engine damage.

2541-0056 9 Power ProTM gas engine with 1" keyed shaft, electric start. Equipped with overhead 58 lbs.valve for cleaner operation and low-oil sensor to prevent engine damage.

2541-0048 13 Power ProTM gas engine with 1" keyed shaft. Equipped with overhead valve for cleaner 73 lbs.operation and low-oil sensor to prevent engine damage.

2541-0049 13 Power ProTM gas engine with 1" keyed shaft, electric start. Equipped with overhead 73 lbs.valve for cleaner operation and low-oil sensor to prevent engine damage.

2541-0050 13 Power ProTM gas engine with 1" threaded shaft. Equipped with overhead valve for cleaner 73 lbs.operation and low-oil sensor to prevent engine damage.

2541-0051 13 Power ProTM gas engine with 1" threaded shaft, electric start. Equipped with overhead 73 lbs.valve for cleaner operation and low-oil sensor to prevent engine damage.

6.5 HP

Call

Call

Call

Call

Call

Call

Call

Call

Call

Call

Call

Call

Call


1-800-640-2476

PWP2P7RT 7 HP Kodiak OHV 2" X 2" Port Size

150 gpm max capacity 25 ft suction lift 134 ft max head

43 Lbs

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in qualityand reliability for professional end-users. Whether to transfer chemical or spray chemical Kodiak has the pump to get the job done.

• Powered by Kodiak OHV engine• 2” Poly pump• Chemical resistant• Viton seals• Assembled in Canada

Established Canadian player has been supplyingprofessional grade equipment for 18 years with over 300,000 units active in the field.

$329.00


1-800-640-2476

PWP2CH5GX 5.5 HP Honda GX160 2" X 2" Port Size

150 gpm max capacity 25 ft suction lift 134 ft max head

49 Lbs

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in qualityand reliability for professional end-users. Whether to transfer chemical or spray chemical Kodiak has the pump to get the job done.

• Powered by HondaGX engine

• 2” Poly pump• Chemical resistant• Viton seals• Assembled in Canada

Established Canadian player has been supplyingprofessional grade equipment for 18 years with over 300,000 units active in the field.

$549.00AgroSpray Ltd. Tillsonburg, Ontario [email protected]

1521-800-640-2476

SPRAY TIPS AND NOZZLES—BROADCAST NOZZLES

TYPE (BROADCAST NOZZLES) SIZE ORIFICE INSERT/TIP BODY MATERIAL

EXAMPLETIP NO.

CNDDOLLARS

Extended Range Tips(Tapered Flat Fan Spray)

Color-Coded

All Sizes

Stainless Steel XR8010SS 9.20

Stainless Steel/Acetal XR8001VS 8.12

Acetal (110° Only) XR11002-VP 3.64

Ceramic/Polypropylene XR11003-VK 6.28

Tip with Quick TeeJet® cap and gasket assembly 015 -02 Acetal (110° Only) XR11002-VP-C 5.06

Extended Range Tips(Tapered Flat Fan Spray)

Color-Coded

All Sizes

Stainless Steel/Nylon XRC8004-VS 9.32

Ceramic/Nylon XRC11004-VK 7.61

Acetal/Nylon XRC110025-VP 4.34

Spray Tips(Tapered Flat Fan Spray)

Color-Coded All Sizes

Acetal TT11001-VP 7.66

Acetal TT11002-VP-C 9.14Tip with Quick TeeJet® cap and gasket assembly

Air Induction XR Flat Spray Tips(Tapered Flat Spray) Color-Coded

All Sizes UHMWPE Polymer AIXR11004VP 8.45

Tip with Quick TeeJet® cap and gasket assembly All Sizes UHMWPE Polymer AIXR11003VP-C 9.83

Air Induction Spray Tips(Tapered Flat Fan Spray)

Color-Coded

All Sizes Stainless Steel/Acetal AI110015-VS 15.54


Color-Coded

All Sizes

Stainless Steel/Nylon AIC11004-VS 16.85

Acetal/Nylon AIC11004-VP 7.78

Ceramic/Nylon AIC110025-VK 13.72


Color-Coded

All Sizes Acetal TTI11004-VP 8.45

Tip with Quick TeeJet® cap and gasket assembly All Sizes Acetal TTI11005-VP-C 10.00

Drift Guard Tips(Tapered Flat Fan Spray)

Color-CodedAll Sizes

Stainless Steel/Acetal DG8002VS 11.25

Acetal DG11002-VP 6.70



Stainless Steel/Acetal TP11001VS 7.25

Acetal TP8002VP 10.98


-0050 or Smaller Brass TP800050 4.75

Larger than -0050 Brass TP800067 4.75

Smaller than -01 Stainless Steel TP800067-SS 28.00

-01 and LargerStainless Steel TP11001-SS 12.51

Hardened Stainless Steel TP11001-HSS 17.24

Spray Tips(Twin Tapered Flat Fan Spray)

Color-CodedAll Sizes Stainless Steel/Acetal TJ60-8003VS 14.14

Double Outlet QJ Adapter with 2 Turbo TeeJet® Tips(Twin Tapered Flat Fan Spray)

Color-Coded

All Sizes Acetal /Nylon QJ90-2XTT11004-VP 22.77

Spray Tips(Twin Tapered Flat Fan Spray)

Color-Coded

All Sizes Acetal TTJ60-11004VP 9.18

Tip with Quick TeeJet® cap and gasket assembly All Sizes Acetal TTJ60-11005VP-C 10.57


1-800-640-2476

SPRAY TIPS AND NOZZLES—BROADCAST NOZZLES

TYPE (BROADCAST NOZZLES) SIZE ORIFICE INSERT/TIP BODY MATERIAL

EXAMPLETIP NO. DOLLARS

Twin Tapered Flat Fan Spray Color-Coded

02-06 Acetal AITTJ60-11004VP 9.53

08-15 Acetal AITTJ60-11008VP 10.97

Tip with Quick TeeJet® cap and gasket assembly

02-06 Acetal AITTJ60-11003VP-C 11.07

08-15 Acetal AITTJ60-11015VP-C 13.50

Spray Tips(Dual Pattern Tapered Flat Fan Spray)

Color-Coded

All Sizes Acetal AI3070-02VP 9.56

Tip with Quick TeeJet® cap and gasket assembly All Sizes Acetal AI3070-04VP-C 11.98

Drift GuardTwinJet Spray Tips(Twin Tapered Flat Fan Spray)

Color-Coded

All Sizes Stainless Steel/Acetal DGTJ60-11004VS 17.26

Spray Tips(Wide Angle Flat Fan Spray)

Color-Coded

All SizesStainless Steel/Acetal TF-VS4 15.49

Acetal TF-VP4 3.48


All SizesBrass TK-3 8.00

Stainless Steel TK-SS3 14.56

Color-Coded All Sizes Stainless Steel/Acetal TK-VS3 13.86


Color-CodedAll Sizes Acetal TK-VP3 1.13

Nozzles(Wide Angle Tapered Flat Fan Spray)

See Example

Brass

1/8K-1/4K-3/8K-1/2K-

3/4K-90 to 1203/4K-140 to 210

1K-3001K-450

6.159.70

15.4021.6935.5565.52

122.81143.70

Stainless Steel

1/8K-SS1/4K-SS3/8K-SS1/2K-SS

3/4K-SS80 to1203/4K-SS140 to 210

1K-SS3001K-SS450

18.5822.4530.1136.4349.6689.33

181.69212.58

Spray Nozzles( Wide Angle Tapered Flat Fan Spray)

Color-Coded

All Sizes Stainless Steel/AcetalQCTF-VS15 to 80

QCTF-VS100 to 12040.7555.62

( Wide Angle Tapered Flat Fan Spray)

Color-Coded

All Sizes Stainless Steel/Acetal

QCK-SS20 to 40QCK-SS50 to 80

QCK-SS100 & 120QCK-SS150 to 210

43.8247.9159.7994.51



Stainless Steel/Acetal 1/4TTJ05-VS 19.92

Acetal 1/4TTJ06-VP 10.30

Spray Tips(Wide Angle Full Cone Spray)


Stainless Steel/Acetal FL-5VS 13.84

Acetal FL-5VC 8.78


1-800-640-2476

SPRAY TIPS AND NOZZLES—BANDING & DIRECTED NOZZLES

TYPE (BANDING & DIRECTED NOZZLES) SIZE ORIFICE INSERT/TIP BODY MATERIAL

EXAMPLETIP NO.

CNDDOLLARS

Air InductionEven Spray Tips (Even Flat Fan Spray)

Color-Coded

All Sizes Stainless Steel/Acetal AI95015EVS $ 15.90

Even Spray Tips(Even Flat Fan Spray)

Color-CodedAll Sizes Stainless Steel/Acetal DG9504EVS 11.25

Spray Tips(Even Flat Fan Spray)

-01 And LargerBrass TP8001E 4.95

Stainless Steel TP8001E-SS 12.73

Hardened Stainless Steel TP8001E-HSS 17.52

Color-Coded -01 And Larger Stainless Steel/Acetal TP8001EVS 7.25

Spray Tips(Twin Even Flat Fan Spray)

Color-Coded

All Sizes Stainless Steel/Acetal TJ60-8003EVS 19.71

Spray Tips(Double Outlet Flat Fan Spray)

All SizesBrass TQ150-01 10.61

Stainless Steel TQ150-01-SS 19.20

Air Induction(Underleaf Banding Spray Tips)

Color-Coded

All Sizes Stainless Steel/Acetal AIUB8504VS 19.65

UB(Underleaf Banding Spray Tips)

All SizesBrass D25143-UB-8504 17.28

Stainless Steel D25143-UB-8504-SS 32.89

OC Spray Tips(Off Center Flat Fan Spray)

-01 to -08, -12, -16

Brass OC-02 12.98

Stainless Steel OC-SS02 19.20

Spray Tips(Full Cone Spray)

Smaller than 1Brass TG-0.9 18.39

Stainless Steel TG-SS0.9 49.88

1 and LargerBrass TG-1 10.57

Stainless Steel TG-SS1 23.34

Spray Tips(Hollow Cone Spray)

All SizesBrass TX-1 6.85

Stainless Steel TX-SS1 43.05

(Hollow Cone Spray) Color-Coded

All SizesCeramic/Polypropylene

TXA8004VKTXB8003VK

TX-VK3

6.946.946.94

Stainless Steel/Polypropylene TX-VS4 7.67

(Hollow Cone Spray) Color-Coded

All Sizes Ceramic/Polypropylene TXR8002VK 6.76

100 Tip Pack All Sizes Ceramic/Polypropylene TXR8003VK-100X 675.88

Air Induction (Hollow Cone Spray)

Color-CodedAll Sizes Ceramic/Polypropylene AITXA8001VK

AITXB8004VK15.5415.54

Orifice DiscsAll Sizes

Acetal DVP-2 1.09Hardened Stainless Steel D2 1.72

Stainless Steel DE2 1.55Ceramic DCER-2 4.78

Cores

All Sizes

Nylon DC23-NY 1.55Brass DC23 3.01

Hardened Stainless Steel DC23-HSS 7.23Ceramic DC25-CER 7.27


1-800-640-2476

SPRAY TIPS AND NOZZLES—BOOMLESS NOZZLES

TYPE (BOOMLESS NOZZLES) SIZE ORIFICE INSERT/TIP BODY MATERIAL

EXAMPLETIP NO.

CND DOLLARS

Large Capacity Nozzles and Swivels(Boomless Flat Spray)

All Sizes Brass

4418-3/4-2TOC4629-3/4-TOC

5430-3/4-2TOC5880-3/4-2TOC

259.02199.92268.18302.84

OC Spray Tips(Large Capacity Off-Center Flat Spray Tips)

See Example

Brass OC-20 54.20

Stainless Steel OC-SS20 105.43

Nozzles (Boomless Flat Spray)

Color-Coded

¼" 10, 20, 25 Acetal1/4XP25R-VP1/4XP25L-VP

58.5658.56

½" 40 or 80 Acetal1/2XP40R-VP1/2XP40L-VP

69.7669.76

Nozzles(Boomless Flat Spray)

All Sizes

Brass1/4KLC3/4KLC

49.2468.94

Stainless Steel1/4KLC-SS18

3/4KLC-SS10880.71

101.34

Nozzles(Extra Wide Angle Tapered Flat Fan Spray)

All Sizes Brass TFW-12 11.72

TYPE (FERTILIZER NOZZLES) SIZE ORIFICE INSERT/TIP BODY MATERIAL

EXAMPLETIP NO.

CND DOLLARS

Fertilizer Nozzles(Solid Stream Nozzle)

0002-0080 Stainless Steel H1/4U-SS0002 $ 16.71

SJ7 Fertilizer Nozzles(7 Orifices with Quick TeeJet® Connection)

Color-Coded

All Sizes Acetal SJ7-04-VP 13.24

SJ3 Fertilizer Nozzles(3 Solid Stream Orifices)

Color-Coded

All Sizes Acetal SJ3-04-VP 10.40

CP4916

CP4928

4908

Flow Regulators(Orifice Regulating Plates and Components)

See Example

Brass 4908-1/4T 10.61

Stainless Steel4908-1/4T-SS

CP4928-SSCP4916-28

46.9141.13

3.64


1-800-640-2476

CAPS (for pressures up to 300 PSI/20 bar)

Quick TeeJet

Cap

Quick TeeJet Cap and Seal Gasket

Seal Gasket

CP19438-EPR(EPDM Standard)

CP19438-VI(Viton Optional)

Quick TeeJet Cap Color Code Quick TeeJet Cap Color Code * Specify Color Code (see chart). Unless otherwise specified, a Yellow (6) Cap will be supplied.

BLACK . . . . . . . . . . . . . WHITE . . . . . . . . . . . . . RED . . . . . . . . . . . . . . . BLUE . . . . . . . . . . . . . . GREEN . . . . . . . . . . . .

12345

YELLOW . . . . . . . . . . . BROWN . . . . . . . . . . . ORANGE . . . . . . . . . . GRAY . . . . . . . . . . . . . . VIOLET . . . . . . . . . . . .

6 7 8 †9 10

† Gray option only offered on polypropylene caps and rated to 150 PSI (10 bar)

FOR USE WITH SPRAY TIPS(300 PSI/20 bar rating) PART NO. CND

DOLLARS

TeeJet® Flat Spray Tips (Smaller Capacities)

Standard-0067 to -08

XR-01 to -08

Turbo TwinJet®

AIXR TeeJet®

TurboTeeJet®

OC TeeJet®

DG TeeJet®

Cap Only . . . . . . . . . . . . . . . . . . . . .

Cap and Seat Gasket Set . . . . . . .

CP25611-*-NY $ 0.85

25612-*-NYR 1.19

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP25611-9-PP 1.07

25612-9-PP 1.36

Fits Hardi

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP23307-*-CE 1.01

23306H-*-CELR 1.40

TeeJet® Flat Spray Tips (Larger Capacities)Standard-10 to -20

XR-10 to -15

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP25609-*-NY .98

25610-*-NYR 1.36

AI Turbo TwinJet®-02 to -06

DG TwinJet®

Turbo TeeJet® InductionAI TeeJet® & AIUB TeeJet®

TJ TwinJet® SJ3 StreamJet

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP25597-*-NY .98

25598-*-NYR 1.36

Fits Hardi

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP21399-*-CE .88

21398H-*-CELR 1.40

AI3070 AI Turbo TwinJet® -08 to -15

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP98578-1-NY 1.62

98579-1-NYR 2.26

Turbo FloodJet® TK-VS FloodJet®TK-VP FloodJet®

Locating Nib

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP25599-*-NY .98

25600-*-NYR 1.36

TK FloodJet® FL FullJet® TX ConeJet®

TG Full Cone Hose Shank AITXA

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP25607-*-NY .98

25608-*-NYR 1.36Cap Only . . . . . . . . . . . . . . . . . . . . .


CP25607-9-PP 1.07

25608-9-PP 1.36

Fits Hardi

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP58350-*-CE .88

58348H-*-CELR 1.40

Disc Core

Seal

Core

CP18999-EPR

Disc-Core(Insert Core into Seal)

Cap Only . . . . . . . . . . . . . . . . . . . . . CP25607-*-NY .98

TXR ConeJet®

Cap Only . . . . . . . . . . . . . . . . . . . . .

Cap, Gasket and O-Ring Set . . .

CP114395-1-NYB

114396-1-NYR

.98

1.62

Disc Core

Ceramic Disc-Core

TXB ConeJet® AITXB

Cap Only . . . . . . . . . . . . . . . . . . . . .


CP26277-1-NY .98

26278-1-NYR 1.48

(¼ only)

Adapter Cap with EPDM Seat Gasket, BlackQuick TeeJet Outlet Adapter . . .

Quick TeeJet Outlet Adapter . . .

QJ4676-1/8-NYR 2.73

QJ(B)4676-1/4-NYR 2.73

Adapter Cap 1/4TTJ withEPDM Seat Gasket, Black

Quick TeeJet Outlet Adapter, 90° . .

Quick TeeJet Outlet Adapter, 45° . .

QJ4676-90-1/4-NYR 5.19

QJ4676-45-1/4-NYR 5.19

Shutoff Cap withEPDM Seat Gasket, Black

Quick TeeJet Shut-Off Cap and Seat Gasket Set . . . . . . . . . . . . . . . 19843-NYR 2.61


1-800-640-2476

MULTIPLE NOZZLE BODIES WITH FERTILIZER OUTLET AND CHEMSAVER

QJ363F QJ365FQJ364F

QJ363F-1000-*-NYB Single or Double Hose Barb Nozzle Body . . . . . . . . . . . . . . . . . . . . . . . . . . 27.20 QJ364F-1000-*-NYB Single or Double Hose Barb Nozzle Body . . . . . . . . . . . . . . . . . . . . . . . . . . 27.20 QJ365F-1000-*-NYB Single or Double Hose Barb Nozzle Body . . . . . . . . . . . . . . . . . . . . . . . . . . 27.20 QJ363F-1000-*-NYB-VI Single or Double Hose Barb Nozzle Body, Viton . . . . . . . . . . . . . . . . . . . 32.67 QJ364F-1000-*-NYB-VI Single or Double Hose Barb Nozzle Body, Viton . . . . . . . . . . . . . . . . . . . 32.67 QJ365F-1000-*-NYB-VI Single or Double Hose Barb Nozzle Body, Viton . . . . . . . . . . . . . . . . . . . 32.67 Note: Hose I.D.: 1000 = 1″

TRIPLE NOZZLE BODIES WITH CHEMSAVER

24230A-2 24230A-1

24230A-1-*-NYB -406, -540, -785 Triple Nozzle Body with Single Hose Shank . . . . . . . 24.9924230A-2-*-NYB -406, -540, -785 Triple Nozzle Body with Double Hose Shank . . . . . . 23.8024230A-3-*-NYB -406, -540, -785 Triple Nozzle Body with Triple Hose Shank . . . . . . . . 23.80

Note: Hose I.D.: 406= 3/8″, 540 = ½″, 785 = ¾″,

NOZZLE BODY SYSTEMS FOR DRY BOOMSCND

DOLLARS

QJS NOZZLE BODIES FOR DRY BOOMS

QJS-B2-*-2-AA QJS-S2-*-2-AA

QJS-B2-*-*-AA -500, -750, -1000 Hose Shank, Bottom Mount, Dual Outlet Nozzle Body. . . . $ 114.26

QJS-B2-*-*-MM -500, -750, -1000 Hose Shank, Bottom Mount, Dual Outlet Nozzle Body. . . . 42.34

QJS-B2-*-*-CM -500, -750, -1000 Hose Shank, Bottom Mount, Dual Outlet Nozzle Body. . . . 35.29

QJS-B2-*-*-EM -500, -750, -1000 Hose Shank, Bottom Mount, Dual Outlet Nozzle Body. . . . 252.58

QJS-S2-*-*-AA -500, -750, -1000 Hose Shank, Side Mount, Dual Outlet Nozzle Body . . . . 115.92

QJS-S2-*-*-MM -500, -750, -1000 Hose Shank, Side Mount, Dual Outlet Nozzle Body . . . . 44.00

QJS-S2-*-*-CM -500, -750, -1000 Hose Shank, Side Mount, Dual Outlet Nozzle Body . . . . 36.94

QJS-S2-*-*-EM -500, -750, -1000 Hose Shank, Side Mount, Dual Outlet Nozzle Body . . . . 254.24

Note: Hose I.D.: 500 = ½″, 750 = ¾″, 1000 = 1″

MULTIPLE NOZZLE BODIES WITH CHEMSAVER®

QJ365CQJ365E

QJ364CQJ364E

QJ363CQJ363E

QJ363C-*-1-NYB -500, -750, -1000 Nozzle Body with Single Hose Shank . . . . . . . . . . . 22.71QJ363C-*-2-NYB -500, -750, -1000 Nozzle Body with Double Hose Shank . . . . . . . . . 22.71QJ364C-*-1-NYB -500, -750, -1000 Nozzle Body with Single Hose Shank . . . . . . . . . . . 22.71QJ364C-*-2-NYB -500, -750, -1000 Nozzle Body with Double Hose Shank . . . . . . . . . 22.71QJ365C-*-1-NYB -500, -750, -1000 Nozzle Body with Single Hose Shank . . . . . . . . . . . 22.71QJ365C-*-2-NYB -500, -750, -1000 Nozzle Body with Double Hose Shank . . . . . . . . . 22.71QJ363C-*-1-NYB-VI -500, -750, -1000 Nozzle Body with Single Hose Shank . . . . . . . . . . . 25.91QJ363C-*-2-NYB-VI -500, -750, -1000 Nozzle Body with Double Hose Shank . . . . . . . . . 25.91QJ364C-*-1-NYB-VI -500, -750, -1000 Nozzle Body with Single Hose Shank . . . . . . . . . . . 25.91QJ364C-*-2-NYB-VI -500, -750, -1000 Nozzle Body with Double Hose Shank . . . . . . . . . 25.91QJ365C-*-1-NYB-VI -500, -750, -1000 Nozzle Body with Single Hose Shank . . . . . . . . . . . 25.91QJ365C-*-2-NYB-VI -500, -750, -1000 Nozzle Body with Double Hose Shank . . . . . . . . . 25.91Note: Hose I.D.: 500 = ½″, 750 = ¾″, 1000 = 1″

SINGLE NOZZLE BODIES WITH CHEMSAVER

QJ39685-1R QJ39685-2 QJ39685-1L

19349 19350 19351 22251 22252

19349-211-*-NYB -406, -540, -785 Single Hose Shank Quick TeeJet Nozzle Body with Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.62

19350-212-*-NYB -406, -540, -785 Double Hose Shank Quick TeeJet Nozzle Body with Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.62

19351-213-*-NYB -406, -540, -785 Triple Hose Shank Quick TeeJet Nozzle Body with Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.62

22251-311-*-NYB -375, -500, -750 Single Hose Shank Quick TeeJet Nozzle Body with Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.62

22252-312-*-NYB -375, -500, -750 Double Hose Shank Quick TeeJet Nozzle Body with Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.62

QJ39685-*-500-NYB ½″ Hose ID, Quick TeeJet Nozzle Body with Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.85

Note: Hose I.D.: 375 & 406 = 3/8″, 540 = ½″, 750 & 785 = ¾″

HOSE SHANK NOZZLE BODIES

18635 18636 18637

18635-111-406-NYB Single Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . . . 4.6818638-111-540-NYB Single Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . . . 4.6818719-111-785-NYB Single Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . . . 4.6818636-112-406-NYB Double Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . 4.6818639-112-540-NYB Double Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . 4.6818720-112-785-NYB Double Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . 4.6818637-113-406-NYB Triple Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . . . 4.6818640-113-540-NYB Triple Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . . . 4.6818721-113-785-NYB Triple Hose Shank Quick TeeJet Nozzle Body . . . . . . . . . . . . . . . . . . . . . 4.68Note: Hose I.D.: 406 = 3/8″, 540 = ½″, 785 = ¾″


1-800-640-2476

MULTIPLE NOZZLE BODIES WITH FERTILIZER OUTLET AND CHEMSAVER

QJ365FQJ364FQJ363F

QJ363F-1-NYB

QJ364F-1-NYB

QJ365F-1-NYB

QJ363F-1-NYB-VI

QJ364F-1-NYB-VI

QJ365F-1-NYB-VI

1" Split Eyelet Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . 22.69



1" Split Eyelet Diaphragm Check Valve, Viton . . . . . . . . . . . . . . . . . . . . 27.70



TRIPLE NOZZLE BODIES WITH CHEMSAVER

24216A-*-NYB -20 mm, -½", -¾" -1" TeeJet Triple Nozzle Body . . . . . . . . . . . . . . . . . . . 24.33

24231A-NYB TeeJet Triple Nozzle Body with ¼" Inlet. . . . . . . . . . . . . . . . . . . . . . . . . . 25.68

SINGLE NOZZLE BODIES WITH CHEMSAVER

QJ17560A †QJ7241 QJ22187

QJ17560A-*-NYB-VI -25 mm, -20 mm, -½", -¾", -1" Quick TeeJet Split Eyelet with ChemSaver, Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.23

QJ17560A-*-NYB -25 mm, -20 mm, -½", -¾", -1" Quick TeeJet Split Eyelet with ChemSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.08

†QJ7421-*-NYB -½", -¾", -1" Quick TeeJet Split Eyelet, less ChemSaver . . . . . . . . . . . . 4.70

QJ22187-*-NYB -½", -¾", -1" Quick TeeJet Split Eyelet, less ChemSaver . . . . . . . . . . . . 11.87

† Does Not Include ChemSaver

RAPID STOP NOZZLE BODY ADAPTER

CP98583

CP98583-1-3/4-SS Rapid Stop for 3/4" QJ360C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.11

CP98583-1-1-SS Rapid Stop for 1" QJ360C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.11

CP98583-2-3/4-SS Rapid Stop for 3/4" QJ17560A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.11

CP98583-2-1-SS Rapid Stop for 1" QJ17560A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.11

CP98583-3-1-SS Rapid Stop for 1" QJ360F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.11

QJS NOZZLE BODIES FOR WET BOOMS

QJS-S2-AA QJS-B2-AA

QJS-T4-AAAA

QJS-B2-*-AA -20mm, -½", -¾" -1" Bottom Mount, Dual Outlet Nozzle Body . . . . . $ 114.26QJS-B2-*-MM -20mm, -½", -¾" -1" Bottom Mount, Dual Outlet Nozzle Body . . . . . 42.34

QJS-B2-*-CM -20mm, -½", -¾" -1" Bottom Mount, Dual Outlet Nozzle Body . . . . . 35.29

QJS-B2-*-EM -20mm, -½", -¾" -1" Bottom Mount, Dual Outlet Nozzle Body . . . . . 251.58

QJS-S2-*-AA -20mm, -½", -¾" -1" Side Mount, Dual Outlet Nozzle Body . . . . . . . . 115.92

QJS-S2-*-MM -20mm, -½", -¾" -1" Side Mount, Dual Outlet Nozzle Body . . . . . . . . 44.00

QJS-S2-*-CM -20mm, -½", -¾" -1" Side Mount, Dual Outlet Nozzle Body . . . . . . . . 36.94

QJS-S2-*-EM

QJS-T4-AAAA

-20mm, -½", -¾" -1" Side Mount, Dual Outlet Nozzle Body. . . . . . . . 254.25

-20mm, -½", -¾", -1" Parallel, Four Outlet Nozzle Body . . . . . . . . . . . 226.17

HIGH FLOW MULTIPLE NOZZLE BODIES

CP98488-VIQJ383QJ383F

QJ383-*-NYB -¾", -1" Split Eyelet High Flow Nozzle Body, Viton . . . . . . . . . . . . . . . . 35.97

QJ383F-*-NYB -¾", -1" Split Eyelet High Flow Nozzle Body with Fertilizer Outlet, Viton . . 39.27

CP98488-VI -11/16", to 3/8" Inlet Adapter Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.67

MULTIPLE NOZZLE BODIES WITH CHEMSAVER®

QJ363CQJ363E

QJ365CQJ365E

QJ364CQJ364E

QJ363C-*-NYB -25 mm, -½", -¾" -1" Split Eyelet Diaphragm Check Valve . . . . . . . . . . 18.17QJ363E-*-NYB -20 mm Split Eyelet Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . 18.17QJ364C-*-NYB -25 mm, -½", -¾" -1" Split Eyelet Diaphragm Check Valve . . . . . . . . . . 18.17QJ364E-*-NYB -20 mm Split Eyelet Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . 18.17QJ365C-*-NYB -25 mm, -½", -¾" -1" Split Eyelet Diaphragm Check Valve . . . . . . . . . . 18.17QJ365E-*-NYB -20 mm Split Eyelet Diaphragm Check Valve . . . . . . . . . . . . . . . . . . . . . 18.17QJ363C-*-NYB-VI -25 mm, -½", -¾" -1" Split Eyelet Diaphragm Check Valve, Viton . . . . 20.94QJ363E-*-NYB-VI -20 mm Split Eyelet Diaphragm Check Valve, Viton . . . . . . . . . . . . . . . 20.94QJ364C-*-NYB-VI -25 mm, -½", -¾" -1" Split Eyelet Diaphragm Check Valve, Viton . . . . 20.94QJ364E-*-NYB-VI -20 mm Split Eyelet Diaphragm Check Valve, Viton . . . . . . . . . . . . . . . 20.94QJ365C-*-NYB-VI -25 mm, -½", -¾" -1" Split Eyelet Diaphragm Check Valve, Viton . . . . 20.94QJ365E-*-NYB-VI -20 mm Split Eyelet Diaphragm Check Valve, Viton . . . . . . . . . . . . . . . 20.94

NOZZLE BODY SYSTEMS FOR WET BOOMSCND

DOLLARS

24231A 24216A


1-800-640-2476

ADAPTERSCND

DOLLARS

SINGLE NOZZLE BODY ADAPTERS WITH CHEMSAVER®

QJ8360 QJ8355QJT8360 QJP19011

QJ8360-NYB ¼" (M) Diaphragm Check Valve Quick TeeJet Nozzle Body . . . . . . . $ 5.84

QJ8355-*-NYB -1/8", ¼" (F) Diaphragm Check Valve Quick TeeJet Nozzle Body . . . . 11.77

QJT8360-NYB Quick TeeJet Adapter, fits TeeJet Bodies using CP1325 Cap . . . . . . 6.35

QJP19011-NYB Quick TeeJet Adapter, fits ⅜" BSPP (M) Thread . . . . . . . . . . . . . . . . . . . 7.71

NOZZLE BODY ADAPTERS

QJ90-2

QJ90-1

QJ¼TT

55240-CELR

22674

QJ¼T-NYBQJT-NYB

QJ90-2-NYR Quick TeeJet Duo Nozzle Adapter with EPDM Gasket . . . . . . . . . . . . 5.19QJ90-1-NYR 90° Quick TeeJet Adapter with EPDM Gasket . . . . . . . . . . . . . . . . . . . . 5.19

QJ1/4TT-NYB

QJ1/4T-NYB

QJT-NYB

22674-1/4-NYB

55240-CELR50854-NYB

Quick TeeJet Nozzle Body Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.20



Quick TeeJet 45° Nozzle Body Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 3.20

Hardi Quick TeeJet Adapter with EPDM Gasket . . . . . . . . . . . . . . . . . . 3.20

Quick TeeJet Nozzle Body 1" (25 mm) Extension . . . . . . . . . . . . . . . . . 4.52

SWIVELS

QJ8600 QJ8600-2

QJ8600-1/4-NYB Quick TeeJet Single Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.55

QJ8600-2-1/4-NYB Quick TeeJet Double Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.31

QJ98595-1/4-*

QJ114401-5/16-*

QJ98594-3/8-*

QJ98592-1/4-*

QJ114400-5/16-*

QJ98590-3/8-*

QJ98588-1/4

QJ114398-5/16

QJ98586-3/8

QJ98598-90-1/4

QJ98599-90-3/8

QJ114403-1/4

QJ114404-5/16

QJ114405-3/8

QJ114430-1/4-*

QJ114432-5/16-*

¼" Push-to-Connect Straight Cap & Body . . . . . . . . . . . . . . . . . . . . . . . 20.26 5/16" Push-to-Connect Straight Cap & Body . . . . . . . . . . . . . . . . . . . . . . 20.26

⅜" Push-to-Connect Straight Cap & Body . . . . . . . . . . . . . . . . . . . . . . . 20.26

¼" Push-to-Connect Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.68 5/16" Push-to-Connect Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.68

⅜" Push-to-Connect Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.68

¼" Push-to-Connect Straight Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.58 5/16" Push-to-Connect Straight Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.58

⅜" Push-to-Connect Straight Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.58

¼" Push-to-Connect 90º Fixed Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.23

⅜" Push-to-Connect 90° Fixed Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.23

¼" Push-to-Connect 90° Swivel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.48 5/16" Push-to-Connect 90° Swivel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.48

⅜" Push-to-Connect 90° Swivel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.70

¼" Push-to-Connect Capless Body, PTC In & PTC Out . . . . . . . . . . . 18.98 5/16" Push-to-Connect Capless Body, PTC In & PTC Out . . . . . . . . . . . 18.98

QJ114434-3/8-* ⅜" Push-to-Connect Capless Body, PTC In & PTC Out. . . . . . . . . . . . . 18.98

*Specify diaphragm check valve opening pressure

QJ98594 QJ98595

QJ114401

QJ98590 QJ98592

QJ114400

QJ98586 QJ98588

QJ114398

QJ98598 QJ98599

QJ114430 QJ114432 QJ114434

QJ114403 QJ114404 QJ114405


1-800-640-2476

BOOM COMPONENTSCND

DOLLARS

ROLLOVERS

98453-1/4M

98452-1/4M 98451-1/4M

98450-1/4M

(B)98450-1/4F Double Rollover with Diaphragm Check . . . . . . . . . . . . . . . . $ 47.93(B, S, P)98450-1/4M Double Rollover with Diaphragm Check . . . . . . . . . . . . . . . . 47.93(B, S, P)98450-3/8M Double Rollover with Diaphragm Check . . . . . . . . . . . . . . . . 47.93(B)98451-1/4F Single Rollover with Diaphragm Check . . . . . . . . . . . . . . . . . 44.49(B, S, P)98451-1/4M Single Rollover with Diaphragm Check . . . . . . . . . . . . . . . . . 44.49(B, S, P)98451-3/8M Single Rollover with Diaphragm Check . . . . . . . . . . . . . . . . . 44.49(B)98452-1/4F Double Rollover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.65(B, S, P)98452-1/4M Double Rollover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.65(B, S, P)98452-3/8M Double Rollover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.65(B)98453-1/4F Single Rollover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.21(B, S, P)98453-1/4M Single Rollover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.21(B, S, P)98453-3/8M Single Rollover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.21AB98450-KIT Rollover Spare Parts Kit (See PL98450 for details) . . . . . . . . 11.41

Note: B = BSPT thread, S= NPS thread, P=BSPP thread, no letter=NPT thread

TEEJET TIP STRAINERS

Strainer505360518079

4514Slotted Strainer

19845Strainer

4067Cup Strainer

19845-*-PP Polypropylene throughout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.715053-*-SS Brass with Stainless Steel Screen . . . . . . . . . . . . . . . . . . . . . . . . 3.31

6051-SS-* Stainless Steel throughout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.11

8079-PP-* Polypropylene with Stainless Steel Screen . . . . . . . . . . . . . . 1.39

5054-*-SS Extra-long, Brass with Stainless Steel Screen . . . . . . . . . . . . 11.44

4067-SS-* Cup Strainer, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.81

4514-* Slotted Strainer, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.55

4514-NY-* Slotted Strainer, Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.47

9106 Fused Bronze Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.57

TEEJET CHECK VALVES

4193AStrainer– Check Valve

11750Check Valve

4193A-*-*SS Brass with Stainless Steel Screen . . . . . . . . . . . . . . . . . . . . . . . . 5.824193A-SS-*-*SS Stainless Steel throughout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.974193A-PP-*-*SS Polypropylene with Stainless Steel Screen and Viton Ball . . . 4.624193A-PP-*-SS-*SS Polypropylene with Stainless Steel Screen and Ball . . . . . . 8.0911750-* Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6911750-SS-* Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.6611750-PP-* Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.54

39.9543.68

39188-8400-406-SS Hose Shank Check Valve, Stainless Steel . . . . . . . . . . . . . . . . .39188-8400-540-SS Hose Shank Check Valve, Stainless Steel . . . . . . . . . . . . . . . . .

TEEJET HOSE SHANKS

42518400

8400-T-406

4251-250, etc. Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.74

4251-250-SS, etc. Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.72

8400-406-NYB Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.20

8400-500-NYB Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.20

8400-T-406-NYB Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.69

Note: Hose I.D.: 250 = 1/4", 406 = 3/8", 500 = ½"

TEEJET CAPS

CP1325CP8027

CP18032A

CP1325 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.58CP1325-SS Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.49CP8027-NYB Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.03CP8027-1-NYB Extra-long, Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.35CP18032A-NYB Winged TeeJet Cap, Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.47CP20230 Brass, for use with Ceramic Discs and Cores . . . . . . . . . . . . . 1.90

CP3819 Brass, for use with ¾T and ¾TT Bodies . . . . . . . . . . . . . . . . . . 12.50

CP3819-SS Stainless Steel, for use with ¾T and ¾TT Bodies . . . . . . . . . 35.50

TEEJET ADAPTERS

4676 CP6250 6406

4676-1/8, -1/4, -3/8 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.27

4676-3/4 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.92

4676-ENP-1/8, -1/4, -3/8 Brass, Nickel-plated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.71

4676-SS-1/8, -1/4 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.11

4676-NYB-1/8, -1/4 Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.68

CP6250 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.21

CP6250-I Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99

6406 Brass, 1/8 Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.53

6406-I Steel, 1/8 Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.81

39188


1-800-640-2476

BOOM COMPONENTSCND

DOLLARS

HOSE SHANK CONNECTORS

605361008400

10123

1343413437

1343613439

1343513438

6053-400, -535

6100-500, -675, -800

10123-1/4-281

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.05

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.93

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.48

8400-1/4-300, -406,-535-NYB Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.458400-3/8-535-NYB Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.93

8400-3/8-406-NYB

8400-1/2-406, -535-NYB

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.93

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.50

8400-3/4-535, -660, -785-NYB Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.698400-T-406 Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.69

13434-406-NYB

13435-406-NYB

13436-406-NYB

13437-540-NYB

13438-540-NYB

13439-540-NYB

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12

Note: Hose I.D.: 300 = 1/4", 400 & 406 = 3/8", 500 & 535 = ½", 660 = 5/8", 785 = ¾"

PIPE PLUGS

8400

8400-1/4-PPB

8400-3/8-NYB

8400-1/2-NYB8400-3/4-NYB

Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.72

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.72

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.31

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.64

HOSE DROPS

21353

21354

21353-6-15-NYB Quick TeeJet Hose Drop, EPDM Gasket, 15"/38 cm . . . . . 13.91

21353-6-24-NYB

21354-15-NYB

21354-24-NYB

Quick TeeJet Hose Drop, EPDM Gasket, 24"/61 cm . . . . . 13.91 TeeJet Hose Drop, Nylon throughout, 15"/38 cm . . . . . . 9.18 TeeJet Hose Drop, Nylon throughout, 24"/61 cm . . . . . . 10.23

SINGLE SWIVEL TEEJET NOZZLE BODY ASSEMBLIES

500076208600

5000-1/8T, -1/4T

5540-1/4

7620-T

8600-1/4T-NYB

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.74

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.91

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.34

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.92

DOUBLE SWIVEL TEEJET NOZZLE BODY ASSEMBLIES

5932 6240 8600-2

6240-1/4TT

5932-2-1/4T

8600-2-1/4T-NYB

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.43

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40.46

Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.99

VARI-SPACING TEEJET CLAMP ASSEMBLIES

AA111 AA111-SQ

AA111-1/2, -3/4, -1

AA111-1-1/4

AA111SQ-1

AA111SQ-1-1/4

AA111SQ-1-1/2

Clamp Sub-assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.30






1-800-640-2476

BOOM COMPONENTSCND

DOLLARS

TEEJET HOSE SHANK BODY ASSEMBLIES

6471B9191B

812112201

6472B9192B

812012202

12670

15427

6471B-400TD TeeJet Nozzle Body Assembly, Brass . . . . . . . . . . . . . . . . . . $ 14.72

6471-SS-C400TD TeeJet Nozzle Body Assembly, Stainless Steel . . . . . . . . . 132.07

6472B-400TD TeeJet Nozzle Body Assembly, Brass . . . . . . . . . . . . . . . . . . 14.72


8120-NYB-540TD, -406TD TeeJet Nozzle Body Assembly, Nylon . . . . . . . . . . . . . . . . . . 3.64







12201-CE-785TD, -1062TD TeeJet Nozzle Body Assembly, Celcon . . . . . . . . . . . . . . . . . 15.81

12202-CE-785TD, -1062TD TeeJet Nozzle Body Assembly, Celcon . . . . . . . . . . . . . . . . . 15.81

12670-406TD-NYB TeeJet Nozzle Body Assembly, Nylon . . . . . . . . . . . . . . . . . . 7.64

12670-406TD-SS TeeJet Nozzle Body Assembly, Stainless Steel . . . . . . . . . 60.12

15427-1-296 TeeJet Nozzle Body Assembly, Brass . . . . . . . . . . . . . . . . . . 10.51

Note: Hose I.D.: 296 = 1/4", 406 = 3/8", 540 = ½", 531 = ½", 785 = ¾", 1062 = 1"

TEEJET SPLIT-EYELET BODY ASSEMBLIES

7421 25775-NYB 7421-TD

25775-1/2T-NYB, -3/4T-NYB, -1T-NYB With Nylon Clamp and Body . . . . . . . . . . . . . . . . . . . . . . . . . . 6.39

7421-1/2T, -3/4T, -1T With Brass Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.31

7421-1/2T-SS, -3/4T-SS, -1T-SS With Stainless Steel Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.74

7421SS-1/2T-SS, -3/4T-SS, -1T-SS With Stainless Steel throughout . . . . . . . . . . . . . . . . . . . . . . 24.60

7421-1/2T-NYB, -3/4T-NYB With Nylon Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.51

7421-1T-NYB With Nylon Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.51

7421-3/4TD With Brass Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.527421-1/2TD-SS, -3/4TD-SS, -1TD-SS With Stainless Steel Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.34

SPLIT-EYELET CONNECTORS

75218370

7521A-1/2x1/8, etc. With Brass Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.98

7521C-1/2x1/8, etc. With Stainless Steel Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.99

7521B-1/2x1/8, etc. Stainless Steel throughout . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.06

8370A-1-1/4x With Brass Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.34

8370A-1-1/2x With Brass Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.03

8370A-2x With Brass Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.69

8370B-1-1/4x Stainless Steel throughout . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.29

8370B-1-1/2x Stainless Steel throughout . . . . . . . . . . . . . . . . . . . . . . . . . . . 48.62

8370B-2x Stainless Steel throughout . . . . . . . . . . . . . . . . . . . . . . . . . . . 52.24

8370C-1-1/4x With Stainless Steel Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.51

8370C-1-1/2x With Stainless Steel Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.74

8370C-2x With Stainless Steel Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.29

TEEJET NOZZLE BODIES WITH CHEMSAVER®

4664B8355

6135A

8360

13430-1

4666B 13430-110742A

4664B Diaphragm Check Valve, Brass . . . . . . . . . . . . . . . . . . . . . . . . 33.56

6135A-1/4, -3/8 Diaphragm Check Valve, Brass . . . . . . . . . . . . . . . . . . . . . . . . 50.07

8355-1/8-NYB, -1/4-NYB Diaphragm Check Valve, Nylon . . . . . . . . . . . . . . . . . . . . . . . 12.10

8360-NYB Diaphragm Check Valve, Nylon . . . . . . . . . . . . . . . . . . . . . . . 19.25

13430-1-NYB Diaphragm Check Valve, Nylon . . . . . . . . . . . . . . . . . . . . . . . 24.87



13431-NYB Diaphragm Check Valve, Nylon . . . . . . . . . . . . . . . . . . . . . . . 19.91

4666B Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.56

6140A-1/4, -3/8 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.52

10742A Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.42

12328-1/2-NYB, -3/4-NYB Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101.90


1-800-640-2476

BOOM COMPONENTSCND

DOLLARS

TEEJET CHEMSAVER® COMPONENTS

CP4620Diaphragm

CP4624Retainer Cap

21950 CP21953CP56709

56714

9758

CP5671156720

98465-15

55300

CP4620-VI

CP4620-FA

CP6227-TEF

CP21953-EPR

CP21953-VI

CP4624

21950-*-NYB

56720-1/8-B or F

55300

55300-1

9758

CP56709-VI

56714-NYB

CP56711-NYB

Diaphragm, Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.76

Diaphragm, Fairprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.53

Diaphragm,Teflon (use with 4620) . . . . . . . . . . . . . . . . . . . . 0.89

Diaphragm, EPDM Rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.53

Diaphragm, Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.71

Retainer Cap, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.27

ChemSaver End Cap Sub-assembly . . . . . . . . . . . . . . . . . . . 4.21

Air ChemSaver Nozzle Body Shutoff . . . . . . . . . . . . . . . . . . 43.01

Air ChemSaver Nozzle Body Shutoff . . . . . . . . . . . . . . . . . . 43.01

Air ChemSaver Nozzle Body Shutoff for QJS . . . . . . . . . . . 43.01

Brass End Cap ASB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.43

QJ350 Diaphragm, Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.86

QJ350 End Cap Sub-assembly . . . . . . . . . . . . . . . . . . . . . . . . 6.13

Retaining Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.55

55295-*-12 e-ChemSaver® Electric Tip Shutoff (12VDC). . . . . . . . . . . . 217.29

55295-*-24

58140-NYB

98465-15

e-ChemSaver Electric Tip Shutoff (24VDC). . . . . . . . . . . . . 217.29

Manual ChemSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.06

Check Valve End Cap Assembly . . . . . . . . . . . . . . . . . . . . . . . 19.21

55295

BOOM COMPONENTS CND DOLLARS

VARI-SPACING CLAMPSQJ111-1/2, -3/4, -1, or -1-1/4QJ111SQ-3/4, -1, -1-1/4, -1-1/2

QJ111SQ-304SSQJ111HP-3/4

Vari-Spacing Quick TeeJet Clamp . . . . . . . . . . . . . . . . . . . . . $3.08

Vari-Spacing Quick TeeJet Clamp . . . . . . . . . . . . . . . . . . . . . 3.08

Stainless (Same sizes as QJ111SQ above) . . . . . . . . . . . . . . 6.84

¾" High Profile QJ Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.95

CP1335

CP1336

CP1321

1/8T, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.62

1/8TT, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.62

¼T, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.62

CP1321-SS ¼T-SS, Stainless Steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.60

CP12094-NYB ¼T-NY, Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.73

CP1322 ¼TT, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.50

CP1322-SS ¼TT-SS, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.60

CP8028-NYB ¼TT-NY, Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.79

CP8108 ¼TT, Extra-long, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.77

CP1323 ⅜T, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.31

CP1324 ⅜TT, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.50

CP1339 ½T, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.14

CP1340 ½TT, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.14

CP3817 ¾T, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.47

CP3817-SS ¾T, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.52

CP3818 ¾TT, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.47

CP3818-SS ¾TT, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.52

22669-1/4-PPB 45° Nozzle Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.95

23220-* Plug Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.4020900-* Ball Valve, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64.57

QJ111 QJ111SQ

20900 23220

22669

T Body(Female Thread)

TT Body(Male Thread)


1-800-640-2476

FLANGE AND MANIFOLD FITTINGSCND

DOLLARS

QUICK CONNECT FITTINGS FOR VALVES AND MANIFOLDS

*Also available in BSPT Threads**All Quick Connect fittings come with clip and O-ring

45529-1/2 ½″ Straight Hose Barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.08

45529-3/4 ¾″ Straight Hose Barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.08

45529-5/8 5/8″ Straight Hose Barb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.08

45529-1 1″ Straight Hose Barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.08

45529-3/4M ¾″ Straight Hose Barb x Male Quick Connect . . . . . . . . . . . . 10.08

45529-1M 1″ Straight Hose Barb x Male Quick Connect. . . . . . . . . . . . . 10.08

45529-90-1/2 ½″ 90° Hose Barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.08

45529-90-3/4 ¾″ 90° Hose Barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.08

45529-90-1 1″ 90° Hose Barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.08

45529-C Quick Connect Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.08

45529-P Quick Connect Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.08

(B)58456-1/4 Large Quick Connect x ¼" Female NPT* Gauge Port . . . . . 19.50

(B)58456-3/4 Large Quick Connect x ¾" Female NPT* . . . . . . . . . . . . . . . . . 19.50

(B)58456-1 Large Quick Connect x 1" Female NPT* . . . . . . . . . . . . . . . . . 19.50

(B)58456-1-1/4 Large Quick Connect x 1¼″ Female NPT* . . . . . . . . . . . . . . . . 19.50

(B)58456-1-1/2 Large Quick Connect x 1½″ Female NPT* . . . . . . . . . . . . . . . . 19.50

58456-1000 Large Quick Connect x 1"/25 mm Hose Barb . . . . . . . . . . . . 19.50

58456-1250 Large Quick Connect x 1¼"/32 mm Hose Barb. . . . . . . . . . . 19.50

58456-1500 Large Quick Connect x 1½"/38 mm Hose Barb. . . . . . . . . . . 19.50

58456-2000 Large Quick Connect x 2"/51 mm Hose Barb . . . . . . . . . . . . 19.50

58456-C Large Quick Connect Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.50

AA440 MANIFOLD INLET/BYPASS CONNECTIONS

37156 37548 37558

CP37156-PP 1" Straight Hose Barb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.85

CP(B)37548-PP 1″ Threaded Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.85

CP37558-PP Blank Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.85

CP39584-PP 1¼″ Straight Hose Barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.85

CP37684-PP ¼" Threaded Gauge Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.85

(B) = BSPT

ADAPTER CABLES FOR 430 & 540 MANIFOLDS AND E-CHEMSAVER®CND

DOLLARS

98552-05 0.5 Meter MetriPack 2-wire Adapter Cable . . . . . . . . . . . . . . . . . $ 17.7198552-15 1.5 Meter MetriPack 2-wire Adapter Cable . . . . . . . . . . . . . . . . . 22.8398552-30 3.0 Meter MetriPack 2-wire Adapter Cable . . . . . . . . . . . . . . . . . 29.7498552-60 6.0 Meter MetriPack 2-wire Adapter Cable . . . . . . . . . . . . . . . . . 36.6298546EC-05 0.5 Meter MetriPack 3-wire Adapter Cable . . . . . . . . . . . . . . . . . 17.7198546EC-15 1.5 Meter MetriPack 3-wire Adapter Cable . . . . . . . . . . . . . . . . . 22.8398546EC-30 3.0 Meter MetriPack 3-wire Adapter Cable . . . . . . . . . . . . . . . . . 29.74

98546EC-60 6.0 Meter MetriPack 3-wire Adapter Cable . . . . . . . . . . . . . . . . . 36.62

58480-0 Mini-Din Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4958480E(C)-05 0.5 Meter Mini-Din with Flying Leads . . . . . . . . . . . . . . . . . . . . . . 18.0358480E(C)-05-* 0.5 Meter Mini-Din with Faston Connection . . . . . . . . . . . . . . . . 37.8758480E(C)-05-** 0.5 Meter Mini-Din with Connector . . . . . . . . . . . . . . . . . . . . . . . . 34.9058480E(C)-15 1.5 Meter Mini-Din with Flying Leads . . . . . . . . . . . . . . . . . . . . . . 21.9958480E(C)-15-* 1.5 Meter Mini-Din with Faston Connection . . . . . . . . . . . . . . . . 30.4558480E(C)-15-** 1.5 Meter Mini-Din with Connector . . . . . . . . . . . . . . . . . . . . . . . . 40.0158480E(C)-30 3.0 Meter Mini-Din with Flying Leads . . . . . . . . . . . . . . . . . . . . . . 36.9458480E(C)-30-* 3.0 Meter Mini-Din with Faston Connection . . . . . . . . . . . . . . . . 45.4258480E(C)-30-** 3.0 Meter Mini-Din with Connector . . . . . . . . . . . . . . . . . . . . . . . . 53.80Note: E version = 2-wire, EC version = 3-wire

98552

58480

98546


1-800-640-2476

ELECTRICALLY OPERATED VALVESCND

DOLLARS

DIRECTOVALVE BALL VALVES

356344B346B

(B)344BEC-2-C or D ¾", 1", Flanged or Quick Connect 2-Way Electric Shutoff Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 360.29

(B)344BEC-3-C or D ¾", 1", Flanged or Quick Connect 3-Way Electric Shutoff Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440.29

(B)344BE-2-C or D ¾", 1", Flanged or Quick Connect 2-Way Electric Shutoff Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360.29

(B)344BE-3-C or D ¾", 1", Flanged or Quick Connect 3-Way Electric Shutoff Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440.29

356BEC-C or D Flanged 2-Way Electric Shutoff Trunnion Valve . . . . . . . . . . . . . 484.39

(B)346BEC-2-C or D 1¼", 1½" or Flanged 2-Way Electric Shutoff Ball Valve . . . . . . . 671.97

(B)346BEC-3-C or D 1¼", 1½" or Flanged 3-Way Electric Shutoff Ball Valve . . . . . . . 671.97

(B) = BSPT

PRESSURE REGULATING VALVES

344BR 344BRL 346BR

344BPR 346BPR

(B)344BR-2-C or D ¾", 1" or Flanged Regulating Ball Valve . . . . . . . . . . . . . . . . . . . . . 359.69

(B)344BRL-2-C or D ¾", 1" or Flanged Linear Regulating Ball Valve . . . . . . . . . . . . . . 359.69

(B)344BPR-2-C or D ¾", 1" or Flanged Regulating Ball Valve . . . . . . . . . . . . . . . . . . . . . 355.70

(B)346BR-2-C or D 1¼", 1½" or Flanged Regulating Ball Valve . . . . . . . . . . . . . . . . . . 775.11

(B)346BPR-2-C or D 1¼", 1½" or Flanged Regulating Ball Valve . . . . . . . . . . . . . . . . . . 775.11

(B)346BPR-3-C or D 1¼", 1½" or Flanged Regulating Ball Valve . . . . . . . . . . . . . . . . . . 775.11

Note: Regulating valves are available in 1, 3 or 6 RPM. PR valve cycle times are double that of R and RL regulating valves.(B) = BSPT

FLOW METERSCND

DOLLARS

FLOW METERS

801 801 Flow Meter with 50 Series Flanged Inlets . . . . . . . . . . . . . . $768.75

801A 801 Flow Meter with 430 Bolted Manifold Inlets . . . . . . . . . . . . 768.75

D26-F75 D26 Flow Meter with 75 Series Flanged Inlets . . . . . . . . . . . . . . 882.95

802 802 Flow Meter with 75 Series Flanged Inlets . . . . . . . . . . . . . . 822.99

801A

801

D26-F75

802


1-800-640-2476

ELECTRIC MANIFOLD VALVES CND DOLLARS

ALL "B" TYPE DIRECTOVALVES ARE AVAILABLE WITH CABLE (C) OR DIN (D) ELECTRICAL CONNECTIONSALL "430" TYPE DIRECTOVALVES ARE AVAILABLE WITH DIN (D) ELECTRICAL CONNECTIONS

STAINLESS STEEL BALL

POLYPROPYLENEBALL

430 2-WAY MANIFOLD Stainless Steel Ball & Stem

431EC-2-D 2-Way DirectoValve Manifold . . . . . . . . . . $ 269.20

432EC-2-D 2-Way DirectoValve Manifold . . . . . . . . . . 488.99



435EC-2-D 2-Way DirectoValve Manifold . . . . . . . . . . 1184.58Manifold assemblies are available with a variety of inlets/outlets. Contact your TeeJet dealer or sales office for more information. (B) = BSPT

440B MANIFOLD(B)441BEC-C or D DirectoValve Manifold . . . . . . . . . . . . . . . . . 545.48 $ 449.69

(B)442BEC-C or D DirectoValve Manifold . . . . . . . . . . . . . . . . . 1061.15 869.51




Manifold assemblies are available with a variety of inlets/outlets. Contact your TeeJet dealer or sales office for more information. (B) = BSPT

450B SERIES MANIFOLDS

450B Narrow450B

(B)451BEC-2(N)-C or D DirectoValve Manifold . . . . . . . . . . . . . . . . . 465.20 369.39






460 2-WAY MANIFOLD Stainless Steel Ball & Stem

(B)461BEC-2-C or D

(B)462BEC-2-C or D

(B)463BEC-2-C or D

(B)464BEC-2-C or D

2-Way DirectoValve Manifold . . . . . . . . . . 441.98




(B)465BEC-2-C or D 2-Way DirectoValve Manifold . . . . . . . . . . 2288.25Manifold assemblies are available with a variety of inlets/outlets. Contact your TeeJet dealer or sales office for more information. (B) = BSPT

490B MANIFOLD Stainless Steel Ball & Stem

(B)491BEC-C or D 356 Trunnion Valve Manifold . . . . . . . . . . 536.39




(B)495BEC-C or D 356 Trunnion Valve Manifold . . . . . . . . . . 2734.98Manifold assemblies are available with a variety of inlets/outlets. Contact your TeeJet dealer or sales office for more information. (B) = BSPT

540 2-WAY MANIFOLD Plunger Valve

541EC-2 2-Way DirectoValve Manifold . . . . . . . . . . 345.88





Manifold assemblies are available with a variety of inlets/outlets. Contact your TeeJet dealer or sales office for more information.Power cable not included. 98546-* cable must be ordered separately.


1-800-640-2476

ALL "B" TYPE DIRECTOVALVES ARE AVAILABLE WITH CABLE (C) OR DIN (D) ELECTRICAL CONNECTIONSALL "430" TYPE DIRECTOVALVES ARE AVAILABLE WITH MINI-DIN ELECTRICAL CONNECTIONS

ELECTRIC MANIFOLD VALVES CND DOLLARS

ALL "B" TYPE DIRECTOVALVES ARE AVAILABLE WITH CABLE (C) OR DIN (D) ELECTRICAL CONNECTIONSALL "430" TYPE DIRECTOVALVES ARE AVAILABLE WITH DIN (D) ELECTRICAL CONNECTIONS

STAINLESS STEEL BALL

POLYPROPYLENEBALL

430FB, 450FB AND 460FB FLOW BACK VALVES

460FB

430FB

450FB

Stainless Steel Ball & Stem

431EC-3FB-D 2-Way DirectoValve Flow Back Manifold .... $290.75

433EC-3FB-D 2-Way DirectoValve Flow Back Manifold .... 773.59

435EC-3FB-D 2-Way DirectoValve Flow Back Manifold .... 1289.36

(B)451BEC-3FB-C or D 2-Way DirectoValve Flow Back Manifold .... 511.69 $406.28

(B)453BEC-3FB-C or D 2-Way DirectoValve Flow Back Manifold .... 1585.62 1269.75

(B)455BEC-3FB-C or D 2-Way DirectoValve Flow Back Manifold .... 2584.27 2094.75

(B)461BEC-3FB-C or D 2-Way DirectoValve Flow Back Manifold .... 811.46

(B)463BEC-3FB-C or D 2-Way DirectoValve Flow Back Manifold .... 2339.79

(B)465BEC-3FB-C or D 2-Way DirectoValve Flow Back Manifold .... 3917.07Manifold assemblies are available with a variety of inlets/outlets. Contact your TeeJet dealer or sales office for more information. (B) = BSPT

ELECTRIC MANIFOLD 3-WAY VALVESCND

DOLLARS

430 3-WAY Stainless Steel Ball & Stem

431EC-3-D Shutoff/Bypass DirectoValve Manifold . . . . . . . . . . . . . . . . $ 322.52

433EC-3-D Shutoff/Bypass DirectoValve Manifold . . . . . . . . . . . . . . . . 914.71

435EC-3-D Shutoff/Bypass DirectoValve Manifold . . . . . . . . . . . . . . . . 1544.36


460 3-WAY (E) Stainless Steel Ball & Stem

(B)461BEC-3E-C or D Shutoff/Bypass DirectoValve Manifold . . . . . . . . . . . . . . . . 716.63




460 3-WAY (C) Stainless Steel Ball & Stem

(B)461BEC-3C-C or D Shutoff/Bypass DirectoValve Manifold . . . . . . . . . . . . . . . . 633.01




430 CONTROL VALVE ASSEMBLIES

98600-A

98600-B

98600-C

98600-A-435EC 2-Way Manifold with Pressure Relief Valve . . . . . . . . . . . . . 1328.69

98601-A-435EC Flow Back Manifold with Pressure Relief Valve . . . . . . . . . 1433.43

98602-A-435EC 3-Way Manifold with Pressure Relief Valve . . . . . . . . . . . . . 1688.45

98600-B-435EC 2-Way Manifold with Strainer, Pressure Relief and Regulating Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1784.29

98601-B-435EC Flow Back Manifold with Strainer, Pressure Relief and Regulating Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1928.46

98602-B-435EC3-Way Manifold with Strainer, Pressure Relief and Regulating Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2144.06

98600-C-435EC 2-Way Manifold with Flow Meter, Strainer, Pressure Relief and Regulating Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 2553.03

98601-C-435EC Flow Back Manifold with Flow Meter, Strainer, Pressure Relief and Regulating Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 2657.80

98602-C-435EC 3-Way Manifold with Flow Meter, Strainer, Pressure Relief and Regulating Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 2912.80

Control valve assemblies are available in a variety of sizes and configurations. Contact your TeeJet dealer or sales office for more information.


1-800-640-2476

ELECTRIC SOLENOID VALVESCND

DOLLARS

DIRECTOVALVE® CONTROL VALVES ELECTRONICALLY OPERATED

AA144A-1AA144P-1

AA144A-2AA144P-2

AA144A-1-3AA144F-1-3AA144P-1-3

CP21737 AA145H

AA144A-3AA144P-3

AA(B)144A-1 Polypropylene (100 PSI/7 bar, 10 GPM/37.9 l/min rating) . . . . . . $181.96

AA(B)144A-2 Polypropylene (100 PSI/7 bar, 10 GPM/37.9 l/min rating) . . . . . . 368.62

AA(B)144A-3 Polypropylene (100 PSI/7 bar, 10 GPM/37.9 l/min rating) . . . . . . 555.31

AA(B)144P-1 Polypropylene (100 PSI/7 bar, 10 GPM/37.9 l/min rating) . . . . . . 250.77



AA(B)144A-1-3 Polypropylene (3 way, 65 PSI/4.5 bar, 8 GPM/30 l/min rating) . . 247.60

AA(B)144P-1-3 Polypropylene (3 way, 65 PSI/4.5 bar, 8 GPM/30 l/min rating) . . 299.79

AA(B)144F-1-3 Polypropylene (3 way, 50 PSI/3.5 bar, 8 GPM/30 l/min rating) . . 203.86

AA145H-1 Nylon (100 PSI/7 bar, 15 GPM/56.7 l/min rating) . . . . . . . . . . . . . . 416.62

CP21737-NYB ¾" Close Nipple Black Nylon (144A 144P 2-Way) . . . . . . . . . . . . . . 5.50

MANUALLY OPERATED VALVESCND

DOLLARS

DIRECTOVALVE BALL VALVES

AA343MAA344MAA346M

AA(B)343M-2-(3/8 or 1/2)-PP Manually Operated, 2-Way, Polypropylene . . . . . . . . . . . . $ 51.70

AA(B)343M-3-(3/8 or 1/2)-PP Manually Operated, 3-Way, Polypropylene . . . . . . . . . . . . 62.48

AA(B)344M-2-3/4 or 1 Manually Operated, 2-Way, Nylon . . . . . . . . . . . . . . . . . . . . . 70.15

*AA344M-2-F Manually Operated, 2-Way, Nylon . . . . . . . . . . . . . . . . . . . . . 70.15

AA(B)344M-3-3/4 or 1 Manually Operated, 3-Way, Nylon . . . . . . . . . . . . . . . . . . . . . 84.82

AA(B)344M-2-(3/4 or 1)-PP Manually Operated, 2-Way, Polypropylene . . . . . . . . . . . . 52.92

AA(B)344M-3-(3/4 or 1)-PP Manually Operated, 3-Way, Polypropylene . . . . . . . . . . . . 64.01

AA(B)346M-2-(1-1/4 or 1-1/2)-PP Manually Operated, 2-Way, Polypropylene . . . . . . . . . . . . 85.05

AA(B)346M-3-(1-1/4 or 1-1/2)-PP Manually Operated, 3-Way, Polypropylene . . . . . . . . . . . . 103.14

*See page 13 for 50 Series Flanges (B) = BSPT

PRESSURE RELIEF/REGULATING VALVES

6815 AA110

8460 23120

AA(B)110-(1/4 or 3/8)-*- Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64.99

AA(B)110-1 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287.60

AA(B)110-1-DI Ductile Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222.65

AA(B)110-1-AL Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184.77

AA(B)110-1-1/4 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295.45

AA(B)110-(1-1/4 or 1-1/2)-DI Ductile Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224.52

AA(B)110-(1-1/4 or 1-1/2)-AL Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200.25

AA(B)110-1-1/2 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295.44

(B)6815-1/2, -3/4 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86.34

(B)6815G-1/2-300, -3/4-300 With Guide Vane, Brass (300 PSI/20 bar) . . . . . . . . . . . . . . . 158.77

(B)6815G-1/2-700, -3/4-700 With Guide Vane, Brass (700 PSI/48 bar) . . . . . . . . . . . . . . . 158.77

(B)6815-1/2-HSS, -3/4-HSS Brass with Hardened Stainless Steel Valve Seats (not 1200) . . 121.98

8460-1/2, -3/4 Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.39

(B)23120-(1/2 or 3/4)-PP Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40.58

(B)23120A-(1/2 or 3/4)-PP Polypropylene with Viton and 316-SS . . . . . . . . . . . . . . . . . 61.21

(B)23120-1/2-PP-60-VI Polypropylene with Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.21

(B)23120-3/4-PP-60-VI Polypropylene with Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.21

(B) = BSPT

DIRECTOVALVE MANUALLY OPERATED CONTROL VALVE

CP21737 AA6B

AA(B)6B Manually Operated Control Valve . . . . . . . . . . . . . . . . . . . . . 59.83

CP21737-NYB ¾" Close Nipple Black Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . 5.50

(B) = BSPT


1-800-640-2476

MANUALLY OPERATED VALVESCND

DOLLARS

TEEVALVE® MANUAL CONTROL VALVE

AA17Y

AA17L

Aluminum, with 1" NPT Inlet Connection . . . . . . . . . . . . . . $151.98

Aluminum, with ¾" NPT Inlet Connection . . . . . . . . . . . . . . 151.98

THROTTLING VALVES

12690-1/2-NYB, -3/4-NYBThrottling Valve, Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(B)23520-1/2-PP, -3/4-PP

109.31 Throttling Valve, Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . 35.12

(B) = BSPT

SPRAY GUNS CND DOLLARS

GUNJET SPRAY GUNS

AA2AY-HSSInsert

AA143-AL

AA23H

AA23L-7676

DX-HSS tip

AA30

AA30L-22425

AA31

AA43L or AA43H

AA43Lor AA43H

23624-30L

AA2AA2A

AA2-AL

AA2A-AL

AY-HSS

AA143-AL-3/4, or -GH

AA23L

AA23H

AA23L-7676-8

AA23L-7676-18

AA23L-7676-24

AA23L-7676-36

AA23L-7676-48

AA(B)30L-PP

AA(B)30L-1/4

AA(B)30-1/4

AA(B)30L-22425-8

AA(B)30L-22425-18

AA(B)30L-22425-24

AA(B)30L-22425-36

AA(B)30L-22425-48

AA31

AA31TL

(B)23624-30L-1/4

Brass, with AY-SS — Orifice Insert . . . . . . . . . . . . . . . . . . . . . . . $ 206.58

Brass, with AY-SS — Orifice Insert . . . . . . . . . . . . . . . . . . . . . . . 170.23

Aluminum, with AY-SS — Orifice Insert . . . . . . . . . . . . . . . . . 143.09

Aluminum, with AY-SS — Orifice Insert . . . . . . . . . . . . . . . . . 131.02

Orifice Insert only for #2 GunJet . . . . . . . . . . . . . . . . . . . . . . . . 11.10

GunJet Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106.56

Brass Inlet Body and Cap, less Tip . . . . . . . . . . . . . . . . . . . . . . . 80.52

Brass Inlet Body and Cap, less Tip . . . . . . . . . . . . . . . . . . . . . . . 82.78

(With 8"/20 cm Extension) Brass, with Cap, less Tip . . . . . . 119.60

(With 18"/46 cm Extension) Brass, with Cap, less Tip . . . . . 127.50



(With 48"/122 cm Extension) Brass, with Cap, less Tip . . . . 173.28

With Cap, less Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.30

With Cap, less Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.92

With Cap, less Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.92

(With 8"/20 cm Extension) Brass, with Cap, less Tip . . . . . . 116.52




(With 48"/122 cm Extension) Brass, with Cap, less Tip . . . . 170.23

Brass, with Cap, less Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86.71

With Trigger Lock, Brass, with Cap, less Tip . . . . . . . . . . . . . . 78.51

MeterJet Spray Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170.27

8604 Inlet Strainer for No. 23L and No. 31 GunJet Spray Guns . 17.89

AA(B)43L or 43H Brass, with D-Disc Tip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198.98

AA(B)43L-AL or 43H-AL Aluminum, with D-Disc Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165.33

AA(B)43LA or 43HA Brass, with D-Disc Tip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180.27

AA(B)43LB Brass, less Cap and Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161.21

AA(B)43LC-1/2, -3/4, 43HC-1/2, -3/4 Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160.02

AA(B)43LD Brass, less Cap and Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149.68

AA(B)43HD

AA(B)43LA-AL or 43HA-AL

AA(B)43LB-AL or 43HB-AL

Brass, less Cap and Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160.02

Aluminum, with D-Disc Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158.34

Aluminum, less Cap and Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150.97

AA(B)43LC-1/2, -3/4, 43HC-1/2, -3/4AL Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160.02

AA(B)43LD-AL Aluminum, less Cap and Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139.95

AA(B)43HD-ALDX-HSS

Aluminum, less Cap and Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149.74 Spray Tip for #43 GunJet, Hardened Stainless Steel . . . . . . 28.70

AA17

2352012690


1-800-640-2476

SPRAY GUNS AND ACCESSORIES CND DOLLARS

TEEJET® LAWN SPRAY GUN

25990-3/4 CP25670 25657

25660

25660-1.5, 3.0, or 4.0 TeeJet Lawn Spray Gun with Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . $ 115.41

(B)25660-0 TeeJet Lawn Spray Gun without Nozzle . . . . . . . . . . . . . . . . . . . . . 101.07

CP25670-*-NY Nozzle for TeeJet Lawn Spray Gun . . . . . . . . . . . . . . . . . . . . . . . . . . 16.25

25990-3/4 and -GGH Hose Shank Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.91

25657-NYB Lawn Gun Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.47

*Note: Extension No. 22665 can be found on page 21.

TRIGGERJET® SPRAY GUN WITH EXTENSION, STRAINER AND TIP

22670-PP

50800

(B)22670-PP-15-* TriggerJet with Extension; Polypropylene, with Spray Tip . . . . 51.45

(B)22670-PP-24-* TriggerJet with Extension; Polypropylene, with Spray Tip . . . . 59.30

(B)22570-PP-15-* TriggerJet with Extension; Polypropylene, without Spray Tip . . 46.30

22570-PP-24-* TriggerJet with Extension; Polypropylene, without Spray Tip . . 53.97

50800-15-PP-* ¼ or ⅜ Hose Barb, 15" Extension, with Spray Tip . . . . . . . . . . . . . 18.78

50800-21-AL-* ¼ or ⅜ Hose Barb, 21" Extension, with Spray Tip . . . . . . . . . . . . . 22.45

TRIGGER VALVES

50800-PP

22650-PP

46886466

61046590

50800-PP-*

(B)22650-PP-*

4688

6466

6104

6590

TriggerJet Spray Gun; Polypropylene . . . . . . . . . . . . . . . . . . . . . . . 14.42

TriggerJet Spray Gun; Polypropylene . . . . . . . . . . . . . . . . . . . . . . . 32.64

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.42

Brass, with Non-locking Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.75

Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.91

Brass, with Non-locking Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.78

SPRAY GUN ACCESSORIES

11740B

13212

3056

371357029

11990

4676

7599

3056 Garden Hose Adapter for No. 46 Trigger Valve, Brass . . . . . . . . . 12.14

4676-3/47029

7599-1/4-ENP, -3/8-ENP

Outlet Adapter, Brass, for #12 GunJet Spray Guns . . . . . . . . . . . . 13.92 (F) x ½" NPT (M) Inlet Adapter with Gasket Brass for #42 and #43 GunJet Spray Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.98 Inlet Adapter for #23 GunJet, Brass . . . . . . . . . . . . . . . . . . . . . . . . . 5.05

11740B ¾" Garden Hose Swivel, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42.15

11990-6

11990-18, -19

13212-3/8, -1/2

¼" NPS Swivel, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.03 ½" NPT (M) Swivel, Brass, for #43 and #143 GunJet Spray Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42.60 Garden Hose Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.27

ADJUSTABLE CONEJET® TIPS

38720-PPB- 5500- 5500-PPB-

38720-PPB-X8,-X12,-X18,-X26 Adjustable ConeJet Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.64

5500-PPB-* Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.35

5500-* Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.73

5780-AX Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.12

12430-AY-HSS Brass with Hardened Stainless Steel Orifice and Core Insert . . 67.01

*- Specify Tip Capacity


1-800-640-2476

SPRAY GUNS AND ACCESSORIES CND DOLLARS

TRIGGER VALVE EXTENSIONS—Less Tip, Strainer and Cap

7715

4673

6671

9527

22665

7715-87715-187715-247715-307715-367715-48

8"/20 cm Straight Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.27 18"/46 cm Straight Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.54 24"/61 cm Straight Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.94 30"/76 cm Straight Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.08 36"/91 cm Straight Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.98 48"/122 cm Straight Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.05

4673-84673-184673-244673-304673-364673-48

8"/20 cm Curved Extension with Adjustable Body . . . . . . . . . . . . 22.31 18"/46 cm Curved Extension with Adjustable Body . . . . . . . . . . . 27.12 24"/61 cm Curved Extension with Adjustable Body . . . . . . . . . . . 28.48 30"/76 cm Curved Extension with Adjustable Body . . . . . . . . . . . 31.35 36"/91 cm Curved Extension with Adjustable Body . . . . . . . . . . . 33.53 48"/122 cm Curved Extension with Adjustable Body . . . . . . . . . . 38.38

6671-86671-186671-246671-306671-366671-48

8"/20 cm Curved Extension with Fixed Nozzle Body . . . . . . . . . . 15.50 18"/46 cm Curved Extension with Fixed Nozzle Body . . . . . . . . . 19.84 24"/61 cm Curved Extension with Fixed Nozzle Body . . . . . . . . . 20.49 30"/76 cm Curved Extension with Fixed Nozzle Body . . . . . . . . . 23.17 36"/91 cm Curved Extension with Fixed Nozzle Body . . . . . . . . . 27.37 48"/122 cm Curved Extension with Fixed Nozzle Body . . . . . . . . 30.50

9527-89527-189527-249527-369527-48

8"/20 cm High Pressure Curved Extension . . . . . . . . . . . . . . . . . . . . 43.89 18"/46 cm High Pressure Curved Extension . . . . . . . . . . . . . . . . . . 50.78 24"/61 cm High Pressure Curved Extension . . . . . . . . . . . . . . . . . . 52.03 36"/91 cm High Pressure Curved Extension . . . . . . . . . . . . . . . . . . 67.46 48"/122 cm High Pressure Curved Extension . . . . . . . . . . . . . . . . . 72.99

22665-15-PP TriggerJet Extension (15"/38 cm) . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.14

22665-24-PP TriggerJet Extension (24"/610 cm) . . . . . . . . . . . . . . . . . . . . . . . . . . 21.88

TANK AGITATION AND CONTAINER RINSING NOZZLESCND

DOLLARS

JET AGITATORS & EDUCTORS

Y33180-PP, Y9270-PP & 46550-PP

6290 6290SC

6290-* Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $51.77

6290-*-SS

6290SC-*

6290SC-*-SS

Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131.42

With Suction Caps, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47.12

With Suction Caps, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 187.67

Y33180-PP and Y9270-PP Eductor Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72.00

46550-1/4-PP Eductor Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.51

46550-1-1/2-PP Eductor Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133.46

TANK & CONTAINER RINSING NOZZLES

VSM

2324055270

D41892

(B)55270-1/2-11-POM Tank Rinsing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97.37

(B)55270-3/4-18-POM

D41892-(B)1/2-POM-6

Tank Rinsing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97.37

Rotary Tank Rinsing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213.01

23240-3-316SS-5.7-316SS Container Rinsing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 764.21

23240-3-316SS-7-316SS Container Rinsing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 794.88 (B)VSM-1/2 Nylon 28, 44, 90 Container Rinsing Nozzle . . . . . . . . . . . . . . . . . . . 47.44


1-800-640-2476

LINE STRAINERS

AA122 LINE STRAINERS

AA122

37270-122-PP

AA122ML

STRAINER NO.

PIPE CONN.NPT (F)

MATERIAL CDN DOLLARS(STRAINER& SCREEN)

SCREENNO. MESH

CND DOLLARS(SCREEN

ONLY)HEAD BOWL

AA(B)122-1/2-PP AA(B)122ML-1/2-PP (B)37270-122-1/2-PP

½"

Polypropylene Polypropylene

$ 20.8222.7082.76

CP23174-1-304SS CP23174-2-304SS

16 30

$ 7.21

AA(B)122-3/4-PP AA(B)122ML-3/4-PP (B)37270-122-3/4-PP

¾"20.8222.7082.76

CP45102-3-SSPP*CP45102-4-SSPP*CP45102-5-SSPP*

5080

1007.94

AA122ML-QC

AA122ML-QCQuick

Connect42.42

CP45102-3-SSPP*CP45102-4-SSPP*CP45102-5-SSPP*

5080

1007.94

AA124A LINE STRAINERS

AA124A

STRAINER NO.

PIPE CONN.NPT (F)

MATERIAL CND DOLLARS(STRAINER& SCREEN)

SCREENNO. MESH

CND DOLLARS(SCREEN

ONLY)HEAD BOWL

AA(B)124A-3/4-I¾"

Cast Iron

Nylon

$ 107.11 CP16903-1-SSPP* 16

$ 15.43AA(B)124A-3/4-AL Aluminum 106.32 CP16903-3-SSPP* 30

AA(B)124A-1-I1"

Cast Iron 107.11 CP16903-4-SSPP* 50

AA(B)124A-1-AL Aluminum 106.32 CP16903-5-SSPP* 80

AA124

AA(B)124-1-1/4-I1¼"


21.73AA(B)124-1-1/4-AL Aluminum 165.35 CP15941-2-SSPP* 30

AA(B)124-1-1/2-I1½"


AA(B)124-1-1/2-AL Aluminum 165.35 CP15941-4-SSPP* 80

AA(B)124-2-I2"

Cast Iron 379.21 CP14634-1-SS 16

72.47AA(B)124-2-AL Aluminum 379.21 CP14634-2-SS 30

AA(B)124-2-1/2-I2½"

Cast Iron 379.21 CP14634-3-SS 50

AA(B)124-2-1/2-AL Aluminum 379.21 CP14634-4-SS 80


1-800-640-2476

LINE STRAINERS

AA126-PP FLUSH-OUT STRAINER WITH MOUNTING LUGS

AA126-3 or 4

AA126-F50

AA126-F75

AA126-5 or 6

STRAINER NO.

PIPE CONN.NPT (F)


SCREENNO. MESH

CND DOLLARS(SCREEN

ONLY)HEAD BOWL

AA126ML-F50 50 Series Flange

Polypropylene Polypropylene $38.46

CP16903-1-SSPP*CP16903-3-SSPP*CP16903-4-SSPP*CP16903-5-SSPP*CP16903-6-SSPP*CP16903-7-SSPP*

16305080

100200

$ 15.43AA(B)126ML-3 ¾" NPT

AA(B)126ML-4 1" NPT

AA126ML-F75 75 Series Flange

Polypropylene Polypropylene 78.72

CP15941-1-SSPP*CP15941-2-SSPP*CP15941-3-SSPP*CP15941-4-SSPP*CP15941-5-SSPP*CP15941-6-SSPP*

16305080

100120

21.73AA(B)126ML-5 1¼" NPT

AA(B)126ML-6 1½" NPT

AA124A SELF-CLEANING LINE STRAINERS

AA124A-SC

STRAINER NO.

PIPE CONN.NPT (F)


SCREENNO. MESH

CND DOLLARS(SCREEN

ONLY)HEAD BOWL

AA(B)124A-3/4SC-AL ¾"

Aluminum Nylon $ 132.85

CP12285-1-SSCP12285-4-SSCP12285-2-SSCP12285-3-SSCP12285-6-SS

16305080

100

$ 23.78

AA(B)124A-1SC-AL 1"

AA(B)124-1-1/4SC-AL 1¼"

Aluminum Nylon 230.09

CP12290-1-SSCP12290-2-SSCP12290-3-SSCP12290-4-SSCP12290-8-SS

16305080

100

41.60

AA(B)124-1-1/2SC-AL 1½"

AA124ML LINE STRAINERS WITH MOUNTING LUGS

AA124ML

STRAINER NO.

PIPE CONN.NPT (F)


SCREENNO. MESH

CND DOLLARS(SCREEN

ONLY)HEAD BOWL

AA(B)124ML-3/4-AL ¾"

Aluminum Nylon

$ 124.71

CP16903-1-SSPP*CP16903-3-SSPP*CP16903-4-SSPP*CP16903-5-SSPP*

16305080

$ 15.43AA(B)124ML-1-AL 1"

AA(B)124ML-1-1/4-AL 1¼"191.83

CP15941-1-SSPP*CP15941-2-SSPP*CP15941-3-SSPP*CP15941-4-SSPP*

16305080

21.73

AA(B)124ML-1-1/2-AL 1½"

AA(B)124ML-2-AL 2"443.21

CP14634-1-SSCP14634-2-SSCP14634-3-SSCP14634-4-SS

16305080

72.47

AA(B)124ML-2-1/2-AL 2½"

*With Polypropylene frame

Also available with BSPT connectionAgroSpray Ltd. Tillsonburg, Ontario [email protected]

1-800-640-2476

SELF-CLEANING LINE STRAINERS WITH MOUNTING LUGS

AA126ML-3 or 4SC

AA124ML-SC

STRAINER NO.

PIPE CONN.NPT (F)

MATERIAL CND DOLLAR(STRAINER& SCREEN)

SCREENNO. MESH

CND DOLLARS(SCREEN ONLY)HEAD BOWL

AA(B)126MLSC-3¾"

Polypropylene $ 59.46CP12285-1-SSCP12285-4-SSCP12285-2-SSCP12285-3-SSCP12285-6-SS

16305080

100

$ 23.78

AA(B)124ML-3/4SC-AL Aluminum Nylon 155.20

AA(B)126MLSC-41"

Polypropylene 59.46

AA(B)124ML-1SC-AL Aluminum Nylon 155.20

AA126MLSC-F50 Flange Polypropylene 59.46

AA(B)126MLSC-51¼"

Polypropylene 99.75CP12290-1-SSCP12290-2-SSCP12290-3-SSCP12290-4-SSCP12290-8-SS

16305080

100

41.60

AA(B)124ML-1-1/4SC-AL Aluminum Nylon 266.89

AA(B)126MLSC-61½"

Polypropylene 99.75

AA(B)124ML-1-1/2SC-AL Aluminum Nylon 266.89

AA126MLSC-F75 Flange Polypropylene 99.75

SPRAYER CALIBRATION ACCESSORIESCND

DOLLARS

CALIBRATION ITEMS

CP20016-NY

CP24034A-PP

CP24034A-PPCP20016-NY

TeeJet Calibration Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $47.97 TeeJet Cleaning Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.61

SPRAY CHECK PAPERS

20301-20302-

20301-1N

20301-2N

20301-3N

20302-1

Water Sensitive Spray Paper 1" x 3" Cards; 50 Cards/Pkg . . . . . 50.40

Water Sensitive Spray Paper 2" x 3" Cards; 50 Cards/Pkg . . . . . 83.70

Water Sensitive Spray Paper 1" x 20" Strips; 25 Strips/Pkg . . . . 156.11

Oil Sensitive Spray Paper 2" x 3" Cards; 50 Cards/Pkg . . . . . . . . 68.19


1-800-640-2476

VERTICAL TANKS

See next page for outlet specs table.

VERTICAL TANKS

Snyder’s vertical tanks are versatile enough to use for everything from bulk storage to portable nurse applications. These tough, lightweight tanks come in a variety of styles and sizes from 65 gallons to 16,500 gallons. Snyder vertical tanks feature stable flat bottoms, maximum drainage siphon assemblies and molded-in tie down lugs.

FEATURES: • Heavy duty bolted fittings standard on 550 gallon and above to reduce threat of fitting loosening during use.• Fitting compatible siphon tubes to allow bottom fill of tank.• Molded-in tie downs for securing and lift lugs for easy movement.• UV inhibitors molded in for longer tank life.

Gallons Diameter Height Manway Part No. Outlet Specs FOB65 23 1/4” 46” 6” 155-- A L

120 32” 39” 10” H15402-- V C150 33 3/4” 60” 14” 5710-- U L200 39 3/4” 56” 14” 5720-- U L200 40” 48” 6” 154-- V L200 33” 67” 10” 802-- E M205 42” 43” 10” H15404-- V C300 35” 80” 10” 163-- E M310 42” 60” 10” H16302-- N1 C360 48” 51” 10” H16303-- N1 C400 45” 64” 18” 174-- N2 L550 64” 46” 18” 806-- N2 P,M550 64” 47” 18” 182-- N2 L,C550 48” 74” 18” 180-- N2 L,M,P,C710 60” 68” 18” H17002 N2 C850 48” 118” 18” 181-- N2 L,M,P

1000 60” 89” 18” H18301-- N2 C1100 64” 91” 18” 183-- N2 L,M,P1100 86” 57” 10” 171-- I L,P,C1100 86” 86” 57” 81200-- I M1500 86” 74” 10” 177-- I L,P,C1500 86” 74” 18” 81201-- I M1550 64” 125” 18” 184-- N2 L,M,P1650 86” 80” 10” 178-- I L,P2000 96” 84” 18” H50501-- N2 C2000 90” 88” 18” 5050-- N2 L,P2000 90” 88” 18” 813-- N2 M2100 102” 72” 18” 10018-- N2 P2500 90” 107” 18” 5090-- N2 L,P2500 90” 107” 18” 81400-- N2 M2600 96” 98” 18” H50904-- N2 C

VERTICAL

www.snydernet.comPlease Note, only tanks from FOB Point L,P are available due to shipping purposes


1-800-640-2476

VERTICAL TANKS

Gallons Diameter Height Manway Part No. Outlet Specs FOB3000 96” 112” 18” H5130-- H C3000 90” 127” 18” 5130-- H L,P3000 90” 126” 18” 8160-- H M3000 102” 97” 18” 74100-- H L,P,C4000 102” 131” 18” 8190-- H M4100 102” 130” 18” 736-- H P4100 120” 100” 18” 820-- H M4300 120” 104” 18” H7420-- H C4400 90” 183” 18” 5210-- H L4500 102” 143” 18” 7420-- H L4700 102” 159” 18” H74202-- H C5000 102” 156” 18” 10020-- H P5000 120” 116” 18” H70001-- H C5000 102” 161” 18” 8210-- H M5400 142 1/2” 91” 18” H70002-- H C5600 142” 102” 18” 5250-- H P6000 102” 188” 18” 7430-- H L,P,C6000 120” 132” 18” 7000-- H L,P6300 120” 140” 18” 8220-- H M6500 120” 145” 18” H7140-- H C6600 120” 153” 18” H53001-- H C6900 120” 154” 18” 7140-- H L,P7600 144” 123” 18” H53002-- H C7650 142” 123” 18” 5300-- H L7800 120” 176” 18” 10032-- H C7900 120” 176” 18” 7370-- H L8300 120” 185” 18” H53003-- H C8900 120” 194” 18” 7400-- H L9800 120” 215” 18” 7450-- H L10500 142” 169” 18” 5330-- H L,P10000 142 1/2” 161” 18” H53301-- H C11000 142 1/2” 177” 18” 10053-- H C12500 142” 199” 18” 5350-- U/W L15000 142” 235” 18” 5370-- U/W L16500 142” 259” 18” 5380-- U/W L

VERTICAL

VERTICAL TANKS

FEATURES: • Heavy duty bolted fittings standard on 550

gallon and above to reduce threat of fitting loosening during use.

• Fitting compatible siphon tubes to allow bottom fill of tank.

• Molded-in tie downs for securing and lift lugs for easy movement.

• UV inhibitors molded in for longer tank life.

A = 6” fill, one 3/4” outlet with anti-vortex. B = 8” fill, one 1 1/4” outlet. E = 10” fill,, one 2” HD outlet with siphon tube. I = 10” fill, one 2” bolted with siphon tube. H = 18” manway, one 3” bolted fitting with siphon tube. N1 = 18” manway, one 2” HD outlet with siphon tube.N2 = 18” manway, one 2” bolted outlet with siphon tube.U = No holes or fittings. Fittings can be ordered separately.V = 6” screw-on cap, one 1 1/4” outlet fitting. W = 18” manway.

OUTLET SPECS:



1-800-640-2476

CONE BOTTOM TANKSSnyder’s mix tanks are available in sizes from 17 gallons to 110 gallons, while our cone bottom storage tanks hold from 475 gallons to 11,850 gallons. The 15º, 30º and 45º cone options provide fast discharge and complete drainage, and both our mix tanks and storage tanks feature engineered welded steel stands. Optional fitting locations and gallonage tapes are also available.

Add 26” to the tank height to get overall height in stand.

OUTLET LEGEND: Q = 10” or 18” fill, and one 2” bolted outlet. O = 18” manway, one 3” total drain bolted outlet.

Gallons DiameterHeight

w/stand Manway Part No.Outlet Specs

Stand Required FOB

30º Cone Bottom70 32” 50” 8” H15601-- T C475 60” 69” 18” H15603-- O 78801000 C

1000 86” 83” 10” 189-- O 79100000 L,C1250 95” 84” 18” 8310-- O 90401202 M1400 86” 93” 10” 190-- O 79100000 L,C1600 95” 87” 18” 8330-- O 90401202 M1775 86” 111” 10” 191-- O 79100000 L,C2000 90” 125” 18” 5070-- O 79100000 L2500 90” 148” 18” 5110-- O 79100000 L,C2600 95” 125” 18” 8350-- O 90401201/1202 M3000 90” 167” 18” 5150-- O 79100000 L,C3000 95” 141” 18” 8360-- O 90401201/1202 M5500 90” 255” 18” 7040-- O 79100000 L6500 90” 296” 18” 7180-- O 79300000 L6900 142” 160” 18” 5280-- O 79500000 L8250 142” 184” 18” 5320-- O 79500000 L11850 142” 239” 18” 5340-- O 79500000 L

45º Cone Bottom500 64” 81” 18” 6190-- O 78800000 L

1000 64” 120” 18” 5000-- O 78800000 L1500 64” 158” 18” 5010-- O 78800000 L2850 90” 163” 18” 5100-- O 79200000 L4350 90” 217” 18” 5180-- O 79200000 L

15º Cone Bottom3000 90” 136” 18” 7460-- O N/A L

CONE BOTTOM TANKS

www.snydernet.com

FEATURES: • Molded-in gallonage markers (indicators).• Slope bottom for easy draining and accurate measuring.• Standard 1 1/4” fitting.• UV inhibitors are molded in for longer tank life.

Gallons Diameter Height Part No. Outlet Specs Stand Required FOB17 18 1/2” 34” 185-- K 48400000 L35 31” 34” 158-- M 48600000 L65 31” 41” 156-- M 48600000 L110 31” 56” 607-- M 48600000 L

MIX TANKS

K = 8” screw-on cap, 1 1/4” outlet with anti-vortex.L = Removable top, one 3/4” outlet , one 1 1/2” or 2 1/2” molded-in hose barb (optional 3/4” to 1 1/4” fitting available).M = 10” fill, one 3/4” outlet, one 1 1/2” or 2 1/2” molded-in hose barb (1 1/4” fitting available).

OUTLET LEGEND

Please Note, only tanks from FOB Point L,P are available due to shipping purposes


1-800-640-2476

CONE BOTTOM TANKS w/POLY STANDS

Part No. Description78800000 64” Cone Stand 500-1000-1500 (4 leg)79200000 90” Cone Stand 45 ton gross weight capacity (8 leg)78801000 475 Gallon basket & stand for P/N H15603--

CONE BOTTOM STANDS 45ºPart No. Description

79000000 86” 1000-1450-1650 Cone Stand (4 leg)79100000 90” 45 ton gross weight capacity Cone Stand (8 leg)79300000 90” 45 ton gross weight capacity Cone Stand (12 leg) 6500 CB90401201 95” stands for P/N 833, 835 & 836 (3” clearance, 4 leg)90401202 95” stands for P/N 833, 835, & 836 (12” clearance, 4 leg)79500000 142” Cone Stand 100 ton gross weight capacity (12 leg)

CONE BOTTOM STANDS 3Oº

steel cone Bott om st Ands

Description Diameter Height w/stand Manway Part No. Outlet Specs Stand FOB225 w/poly stand 48” 55” 18” H15604-- O-2” Included C325 w/poly stand 48” 66” 18” H15605-- O-2” Included C

1000 86” 78” 10” 189-- O 1003 Poly or 79000 Steel C1400 86” 90” 10” 190-- O 1003 Poly or 79000 Steel C1775 86” 105” 10” 191-- O 1003 Poly or 79000 Steel C

Poly Stand Only 86” 36” N/A 1003-- N/A -- C

pol y c one Bott om st Ands & c one Bott om t Anks

The new polyethylene cone stands eliminate corrosion and the associated maintenance costs. The stands are forkliftable, and are designed not to interfere in viewing the liquid levels of the cone tank.

pol y cone Bott om t Anks & st Ands

www.snydernet.com

FEATURES: • Molded-in gallonage markers (indicators).• Slope bottom for easy draining and accurate measuring.• Standard 1 1/4” fitting.• UV inhibitors are molded in for longer tank life.

MIX TANK STANDSPart No. Description48400000 17 mix tank stand (18”Wx28”L) 24 lbs.48600000 35-65-110 mix tank stand (30”Wx20”L) 29 lbs.



1-800-640-2476

Gallons Diameter Height Length Part No. Outlet Specs FOB30 PCO 19” 22 1/2” 24 1/2” 1091-- U - 6” Lid L,P,C50 PCO 19 1/2” 22 1/2” 38” 1171-- U - 6” Lid L,P,C

100 PCO 30” 31” 38” 1201-- U - 10” Lid L,P,C150 PCO 36” 29” 48” 1571--- U - 10” Lid L,P,C200 PCO 36” 39 1/2” 48 1/2” 1661-- U - 10” Lid L,P,C325 PCO 38” 36 3/4” 69” 1721-- U - 18” Lid C

PCO TANKS

OUTLET LEGEND: U=No holes or fittings. Fittings can be ordered separately.

Gallons Tank Width Height Length Part No. Outlet Specs FOBRectangular Tanks

50 25 1/2 16 40 1/2 1006000C-- U M100 25 1/2 28 1/2 40 1/2 1006100C-- U M

Horizontal TanksGallons Diameter Height Length Part No. Outlet Specs FOB

25 23” 26 3/4” 18 1/2” 103-- A P55 23” 26” 38 1/4” 105-- A L,P,M,C110 30” 34 1/4” 49 3/4” 111-- C L,P,M,C150 30” 34 3/4” 60” 113-- C M150 32” 36 1/2” 55 1/4” 115-- C L,C200 32” 36 1/2” 70 1/2” 123-- C L,M,C200 38” 41 3/4” 52” 125-- C M,C300 38” 42” 71 1/2” 133-- C P,M,C400 42” 46 1/4” 72” 135-- C L500 42” 47” 92” 10029-- C C500 48” 52 1/4” 74 3/4” 139-- C L,C1000 64” 68” 86 1/2” 1431-- U - 10” Lid L2600 70” 70” 165” H14301-- H C

HORIZONTAL TANKS

FEATURES:• Molded-in gallonage markers (indicators).• 6” threaded opening.• Molded-in inserts for 12 volt pump mounting.• UV inhibitors are molded in for longer tank life.

FEATURES:• Molded-in gallonage markers (indicators).• Flat spots on each end for easy agitation.• Design requires no additional support or

banding.• UV inhibitors are molded in for longer life.

FEATURES:• 10” threaded cap for easy filling.• Molded-in gallonage markers (indicators).• Center sumps and end flat spots.• UV inhibitors are molded in for longer life.

OUTLET LEGEND: A = 6” fill, one 3/4” outlet with anti-vortex. H =18” manway, one 3” bolted outlet w/siphon.C = 10” fill, two 1 1/4” outlet (1 w/anti-vortex). U = No holes or fittings. Fittings can be ordered separately.

Gallons Diameter Height Length Part No. Outlet Specs FOB8 12” 14 3/4” 16” 102-- R L,P,C

12 12” 18 3/4” 16” 104-- R L,P,C15 14” 13 1/4” 32” 110-- G L,C25 17 3/4” 16 1/4” 36” 114-- G L,C

LAWN & GARDEN TANKS

APPLICATOR TANKS

G = 6” Cap, no outlet.R = 6” fill, one 1” diameter 3/4” long 1/2” ID threaded, molded spout with 4 1/4” x 20” molded-in anchor inserts.

OUTLET LEGEND:



1-800-640-2476

APPLICATOR TANKS

OUTLET LEGEND: U = No holes or fittings. Fittings can be ordered separately.

Gallons Diameter Height Length Part No. Outlet Specs FOB300 48” 30” 72” 1471-- U - 10” Lid C400 48” 39” 72” 1241-- U - 10” Lid C525 58” 36” 81” 1481-- U - 10” Lid L,C850 68” 44” 93” 1501-- U - 10” Lid L1025 78” 47” 93 1/2” 1491-- U - 10” Lid L1300 86” 66” 89” 1001-- Q - 18” Lid L

ELLIPTICAL TANKS

FEATURES:• Molded-in gallonage markers (indicators).• Low profile for ease of transport.• Bottom sumps and recessed end flat spots.• UV inhibitors are molded in for longer life.

OUTLET LEGEND: C = 10” FILL, TWO 1 1/4” Outlets, one with anti-vortex.

Gallons Diameter Height Length Part No. Outlet Specs FOB200 TV 32” 42 1/2” 48” 127-- C L

200 STV 24” 45 1/2” 59” 126-- C C250 STV 24” 59” 59 3/4” 118-- C C260 TV 31” 48” 54” 131-- C L

SIDEMOUNT/TRIM-VUE TANKS

FEATURES:• Molded-in gallonage markers (indicators).• Designed for easy viewing from tractor cab.• Bottom sumps for better drainage.• UV inhibitors are molded in for longer life.

Gallons Diameter Height Length Part No. Outlet Specs FOB300 46” 33” 64 1/2” 134-- C L500 57” 38 1/2” 77” 138-- C L

OUTLET LEGEND: C = 10” FILL, TWO 1 1/4” Outlets, one with anti-vortex.

CHAMPION SPRAYER TANKS

FEATURES:• Molded-in gallonage markers (indicators).• Unique design excellent for custom applications.• Bottom sumps for ease of draining.• UV inhibitors are molded in for longer life.

www.snydernet.com

Gallons Diameter Height Part No. Outlet Specs FOB1100 79” 79” 62602-- C C

OUTLET LEGEND: L = 10” (Lnk) or 18” (CA) lid.

SPHERICAL TANKS

FEATURES:• Designed for special applications, reduces sloshing.• Bottom sump for better drainage.• UV inhibitors are molded in for longer life.



1-800-640-2476

www.snydernet.com

LEG TANKS & SUPER NURSE TANKS

FEATURES:• Molded-in gallonage markers (indicators).• Molded-in baffles to reduce sloshing.• Total drain bolted fitting standard for complete drainage.• 18” manway for easy access.• UV inhibitors are molded in for longer tank life.

Gallons Diameter Height Length Part No. Outlet Specs Bands/Hoops Required FOB715 Slope 47” 49” 104” 10043-- T N/A L,M1000 Slope 46” 48” 154” 541-- T 45900003 L1250 Slope 46” 57” 154” 543-- T 45200007 L1615 Slope 69” 61 1/4” 140” 10034-- T 45800009 M2015 Slope 69” 72 1/4” 140” 10035-- T 45800011 M3100 Slope 92” 74” 142” 75002-- T 45800000 L

TOTAL DRAIN/SLOPE BOTTOM TANKS

A = 6” fill, one 3/4” outlet with anti-vortex. D = 18” manway, one 2” bolted outlet with siphon tube. T = 18” fill, one 2” total drain bolted outlet. E = 10” fill, one 2” HD outlet with siphon tube. G = 6” cap, no outlet.H = 18” manway, one 3” bolted outlet. O = 18” manway, one 3” bolted total drain fitting. Q = 18” manway, one 2” bolted fitting. S = 10” fill, one 1 1/4” outlet.

OUTLET LEGEND

CENTER SUMP DRAINABLE & ELLIPTICAL LEG

Gallons Diameter Height Length Part No. Outlet Specs Hoops Required FOB1650 71” 55” 140” 1007-- H - 18” Lid 45800003 C,M2000 84” 55” 142” 10023-- H - 18” Lid 45800007 P,C2600 82” 70” 155” 8470-- H - 24” Lid 99402226 L,P,M,C3000 92” 76” 142” 7500-- H - 18” Lid 45800000 L,P,M,C

ELLIPTICAL LEG TANKS

FEATURES:• Molded-in gallonage markers (indicators).• Low profile for ease of transport.• Molded-in baffles reduces sloshing.• UV inhibitors are molded in for longer life.OUTLET LEGEND: H = 18” Manway, one 3” bolted outlet with siphon tube.

These tanks feature total drain center sumps to ensure complete drainage. Total drain bolted fitting is a standard option, all angles in the tank drain to the center sump for complete product application. No wasted liquids equal valuable savings.



1-800-640-2476

www.snydernet.com

LEG TANKS & SUPER NURSE TANKS

Gallons Diameter Height Length Part No. Outlet Specs Bands/Hoops Required FOB30 23” 25 3/4” 19 1/2” 108-- G 33900093 L,P,M,C60 23” 25 3/4” 38” 106-- A 33900093 L,P,M,C

125 30” 34 1/2” 50” 112-- S 33900094 L,P,C200 41” 31 3/4” 54” 122-- S 33900094 L230 38” 42 1/2” 52” 128-- S 33900095 L,P,C300 38” 42 1/2” 72” 132-- S 33900095 L,P,M300 38” 38” 67” H13201-- S 45400006 C500 49” 49” 72” H14001-- E 45300007 C525 48” 52 1/2” 75” 140-- E 33900096 L,P,M730 57 1/2” 57 1/2” 80” 136-- E 33900097 L,C,P

LEG TANKS

FEATURES:• Molded-in gallonage markers (indicators).• Free standing HLT requires no cradles for support (optional).• Ribbed for strength with built-in supports.• UV inhibitors are molded in for longer tank life.

Perfect for nurse applications, Snyder leg tanks eliminate the need for steel mounting saddles and cradles and come in a variety of sizes. Snyder leg tanks feature screw-on and hinged leak-proof lids, recessed areas for tie downs, molded-in gallonage markers and sturdy self-supporting molded-in legs.

A = 6” fill, one 3/4” outlet with anti-vortex. D = 18” manway, one 2” bolted outlet with siphon tube. T = 18” fill, one 2” total drain bolted outlet. E = 10” fill, one 2” HD outlet with siphon tube. G = 6” cap, no outlet.H = 18” manway, one 3” bolted outlet. O = 18” manway, one 3” bolted total drain fitting. Q = 18” manway, one 2” bolted fitting. S = 10” fill, one 1 1/4” outlet.

OUTLET LEGEND

FEATURES:• Molded-in gallonage markers (indicators).• Molded-in baffles to reduce sloshing.• Bolted fitting standard to reduce fitting loosening during use.• UV inhibitors molded in for longer tank life.

Gallons Diameter Height Length Part No. Outlet Specs Bands/Hoops Required FOB750 46” 48 1/2” 116 1/2” 130-- D 45900006 L1025 48” 50” 139” 144-- D 45300003 L,P,C1200 68” 40” 140” 832-- H 99402212 M1600 68” 50” 140” 837-- H 99402217 M1685 60” 62” 159” 146-- H 45500001 L,M2000 60” 70 1/2” 160” 751-- H 45500002 L3400 82” 86” 155” 7520-- H 45700001 L

SUPER NURSE TANKS



1-800-640-2476

www.snydernet.com

Gallons Diameter Height Part No. Outlet Specs FOB150 54 1/2” 25 3/4” 160-- E P300 64” 32 1/2” 162-- E P450 64” 48” 165-- E P

UTILITY TANKS

E = 10” fill, one 2” HD outlet with siphon tubeFEATURES:• Molded-in gallonage markers (indicators).• 300 and 450 gallon tanks have offset lid for

easy-access side filling.• Natural color is FDA compliant for water.• UV inhibitors are molded in for longer tank life.

Gallons Diameter Height Length Part No. Bands/Hoops Required FOB2500HS 82” 72” 156” 846071327 Included L,M

3250 Dual 92” 72” 178” 870071347 Included L,M

2500HS 82” 72” 156” 8460000C95003 N/A L,M3200HS Dual-right 92” 72” 178” 8240000C95002 N/A L,M

3200 Dual-left 92” 72” 178” 8230000C95002 N/A L,M

FEATURES: • Molded-in gallonage markers (indicators).• Heavy duty steel support.• Snyder Unitized Molded Outlet (SUMO®) for complete drainage.• UV inhibitors are molded in for longer life.

Tank assemblies have 24” transport lids, and 3” sumo outlets. 3250 Dual, has 2-24” transport lids, and 2-3” Sumos.Tank only, have 1-24” transport lid, and 1-3” sumo.

VALUE ADDED SUPER NURSE ASSEMBLY

VALUE ADDED SUPER NURSE - TANKS ONLY

VALUE ADDED TANKS, UTILITY TANKS & CONTAINMENTS



1-800-640-2476

LADDERS

90404227 Ladder - 2600 SN (P/N 847--)

Part No. Description Width Length Weight 40100000 25x23” 16” 18” 17 lbs 40400000 110x30”, 150x30”

150x32”, 200x32” 12” 21” 38 lbs 40500000 200x38”, 300x38” 12” 28 1/2” 57 lbs 40800000 400x42” 12” 30 1/2” 69 lbs 40900000 500x48” 12” 37 1/2” 78 lbs

Two curved support sections with bands and padding for one tank. 25x23” requires only 1 curved support section.

sAddles

Part No. Description 33200003 Padding-12”x36 1/2” 33900035 47” band each (fits 25x23”, 55x23”) 33900037 71 1/2” band each (fits 110x30”, 150x30”,

150x32”, 200x32”) 33900038 80” band each (fits 200TV, 260TV, 200 champ,

525 elliptical) 33900039 84” band each (fits 200x38”, 300x38”) 33900040 102” band each (fits 500x48”, 720x54”) 33900041 129” band each (fits 1000x65”) 33900093 56” leg tank band each (fits 30 & 60 gallon) 33900094 74” leg tank band each (fits 125 gallon) 33900095 95” leg tank band each (fits 230 & 300 gallon) 33900096 119” leg tank band each (fits 500 gallon) 33900097 136” leg tank band each (fits 730 gallon) Elliptical Bands 33900104 64” band (fits 300 elliptical) 33900105 100” band (fits 850 elliptical) 33900106 111” band (fits 1000 elliptical)

34700014 J-bolt Package Horizontal Leg Tanks

pAdding & BAnds

Part No. Description Width Length Weight 43100000 110x30”, 150x32” 24” 40” 55 lbs 43200000 150x30”, 200x32” 24” 55” 67 lbs 43600000 200x38” 36” 40” 70 lbs 43700000 300x38”, 400x42” 36” 55” 86 lbs 44000000 500x48” 45” 55” 106 lbs

cr Adles

Part No. Description Width Length Weight 45100000 200 x 38” 28” 41” 110 lbs 45400000 500 x 48” 38” 48” 164 lbs 45600000 1000 x 65” 45200001 1000 X 46”

Part No. Description 45400006 300 X 38” hoop assembly (2) 45300007* 500 X 49” hoop assembly (2) 45300001 525 x 48” hoop assembly (2) 45400002 730 x 54” hoop assembly (each) 45200003** 750 x 46” hoop assembly (3) 45900004 1000 x 46” center drain hoop assembly (4) 45300003 1025 x 48” hoop assembly (4) 45800009 1615 drainable hoop assembly 45500001 1685 x 60” hoop assembly (4) 45500002 2000 x 60” hoop assembly (4) 45800011 2015 drainable hoop assembly 45700001 3400 super nurse assembly (4)

34700529 J-bolt package for 1025-2000 super nurse

Elliptical Hoop Assemblies 99402212 1200 Elliptical hoop assembly 99402217 1600 elliptical hoop assembly 45800003 1650 elliptical hoop assembly (4) 45800007 2000 elliptical hoop assembly 99402226 2600 super nurse hoop assembly (4) 45700004 2600 elliptical hoop assembly (4) (narrow) 45800000 3000 elliptical hoop assembly (4)

34700530 J-bolt package for 3000 elliptical 34701580 J-bolt package for 2600 elliptical (3/4”)

skid Assem Blies

STEEL ACCESSORIES

www.snydernet.com

Hoop Assem Blies

Saddles, pads and bands

Cradles Skid assemblies Hoop assemblies


1-800-640-2476

FITTINGS & ACCESSORIES

Part No. Description 33100186 EPDM gasket for 2” PP bltd 33100187 VITON gasket for 2” PP bltd 33100188 EPDM gasket for 3” PP bltd 33100189 VITON gasket for 3” PP bltd

REPLACEMENT GASKETS forPOLY PRO BOLTED FITTINGS

Part No. Description 34700088 10” threaded cap 34300038 5” McPhee cap 34300047 6” screw-on cap 34300216 8” lid assembly 34701243 14” lid assembly 34300012 18” lid assembly 34300226 4” insert w/vent for 18” lid 34100125 18” hinged lid assembly 34700352 24” lid assembly 8570000C95401 24” poly hinged lid (new) 34500008 Poly lid tie

LIDS & MANWAYS

Part No. Description 34300005 3/4” SII std. poly 34300006 1” SII std. poly 34300003 1 1/4” SII std. poly 34300008 1 1/2” SII std. poly

All fittings include EPDM gaskets.

DOUBLE THREADED APPLICATOR FITTINGS

Part No. Description 34700007 anti-vortex (1-1 1/4” ftg.) 34300009 anti-vortex (cap only) 34100115 2” (vent cap) 34100114 2” (vent cap with mesh screen)

ANTI-VORTEX VENTS

Part No. Description 34100103 2” poly pro bltd w/EPDM 34701111 2” poly pro bltd w/VITON 34700842 2” poly pro bltd w/EPDM (SST) 34700841 2” poly pro bltd w/EPDM (LST) 34700852 2” poly pro bltd w/VITON (SST) 34700849 2” poly pro bltd w/VITON (LST) 34100105 3” poly pro bltd w/EPDM 34701112 3” poly pro bltd w/VITON 34700844 3” poly pro bltd w/EPDM (SST) 34700843 3” poly pro bltd w/EPDM (LST) 34700851 3” poly pro bltd w/VITON (SST) 34700850 3” poly pro bltd w/VITON (LST) SST = short siphon tube LST = long siphon tube

BOLTED DOUBLE FLANGE FITTINGS

Part No. Description 33100001 EPDM for applicator ftg. 33100002 VITON for applicator ftg. 33100140 EPDM gasket for 2” PE ftg. 33100139 VITON gasket for 2” PE ftg. 33100142 EPDM for 3” PE ftg. 33100006 VITON for 3” PE ftg.

REPLACEMENT GASKETS forDOUBLE THREADED FITTINGS

Part No. Description 34701596 2” bltd FXF SS316-3/EPDM 34701597 2” bltd FXF SS316-3/VITON 34701598 3” bltd FXF SS316-3/EPDM 34701599 3” bltd FXF SS316-3/VITON 34701600 4” bltd FXF SS316-3/EPDM 34701601 4” bltd FXF SS316-3/VITON

STAINLESS STEEL BOLTED FITTINGS

www.snydernet.com

Part No. Description 34100104 2” double threaded w/ EPDM 34701142 2” double threaded w/ VITON 34700840 2” double threaded w/ EPDM (SST) 34700845 2” double threaded w/ EPDM (LST) 34700847 2” double threaded w/ VITON (SST) 34700848 2” double threaded w/ VITON (LST) 34300120 3” double threaded w/ EPDM 34700542 3” double threaded w/ VITON 34700539 3” double threaded w/ EPDM (SST) 34700538 3” double threaded w/ EPDM (LST) 34700546 3” double threaded w/ VITON (SST) 34700545 3” double threaded w/ VITON (LST) SST = short siphon tube LST = long siphon tube

DOUBLE THREADED FITTINGS

Part No. Description 34100116 2” PP Total Drain bltd/EPDM 34100117 3” PP Total Drain bltd/EPDM Exclusively for cone bottom and center sump tanks.

BOLTED TOTAL DRAIN FITTINGS

34100148 2” Poly Pro long siphon tube 34700534 2” Poly Pro short siphon tube 34100149 3” Poly Pro long siphon tube 34700535 3” Poly Pro short siphon tube

REPLACEMENT SIPHON TUBES

Part No. Description 34100380 2” Stress Reliever - adapter only. 34701647 2” Bolted Fitting with Stress Reliever adapter & siphone tube. 34701630 3” Bolted fitting with Stress Reliever adapter & siphon tube. 34100379 3” Stress Reliever - adapter only.

STRESS RELIEVER


1-800-640-2476

Model THS-200 and Pro-Model THS-100

The original hand-held herbicide wipe-on applicator is easier than hoeing and safer than spraying; designed to apply systemic herbicides only where you need them, on the weeds. Sideswipe's patented design delivers just enough chemical to do the job, without the excessive drip problems of other hand-held applicators. Sideswipe is the practical and environmentally sound choice for applying herbicides. One fill-up will eliminate weeds on up to 1800 sf (Pro-Model THS-100) or 1200 sf (Model THS-200).

Part# Description PriceXXTHS100 Large Sideswipe $49.95XXTHS200 Small Sideswipe $45.95XXTH101 Handle $14.20XXTH102W Elbow $12.60XX103W Drip Ring $1.02XX104W Large Pad $24.34XX105W Large Shield $8.66XX204 Small Pad $22.95XX205 Small Shield $7.88


1-800-640-2476

Documents

Download the Parts & Service catalogue (.pdf, 16 MB)