Double Slider Double Slider above

Double Slider below

X X X X

X X

Unequal Vent

X X

– DOUBLE SLIDER- Min 2016 Max 6060

– DOUBLE SLIDER ABOVE/BELOW- Min 2030 Max 6060

Minimum egress for half-vent is 4036

NOTE: For engineering approval contact your Milgard representative for anyconfiguration over 40 square feet. Each Milgard Manufacturing plant reservesthe right to alter or change sizes and configurations according to locationcapabilities. Ask your Milgard rep about specialty applications.

Windows over 40 square feet shipped open for field glazing. Varies by location.

8125T-1NOVEMBER 2008

Double Sliding WindowsTuscany™ Vinyl Replacement Window

The Tuscany Series Double Slider is designed forNew Construction, Insert Replacement or Z BarReplacement applications. The standard DoubleSlider frame is 3 1/4” deep with a 9/16” deepscreen pocket projection. It comes with a 1 3/4”tall nail fin at a 1 3/8” setback. The Block framemodel is available for Insert Replacement into anexisting wood window frame. We also offer twodifferent Z Bar frame options for Replacement into stucco exterior applications.

The Tuscany Double Slider gives you a high quality window with traditional styling detailsand outstanding energy performance. They areavailable in White or Tan frames. The durablevinyl frames are virtually maintenance free andwill never need painting or staining. We buildyour windows to your exact size and specifica-tions, at NO extra charge.

Both Tuscany Double Slider sash operate smoothlyon tandem rollers. The roller assemblies have a

height adjustment feature to allow proper panelalignment. Tuscany Double Sliders feature ourexclusive SmartTouch™lock. We even have apatent pending for this Milgard innovation. The passive sash has a unique concealed detent to secure the outer panel in the closed position for easier locking.

Like all Milgard windows, patio doors and skylights, the Tuscany series carries a Full LifetimeWarranty to the original, single family homeown-er, covering both materials and labor. And onlywith Tuscany, you also get a Lifetime accidentalglass breakage warranty. The Milgard Warranty is fully transferable for up to ten years. For moreinformation, locate our clearly the best one-pagewarranty on our website at milgard.com.

Commercial and multi-family or apartment projects are covered by a 10 year Warranty fromthe date of manufacture, covering all materials and labor, including the glass unit(s).

8125T-2 NOVEMBER 2008

Double Sliding WindowsTuscany™ Vinyl Replacement Window

CONFIGURATIONS

The Tuscany Series Double Slider gives you its unique either sideventilation with both sash operable. They can be ordered as individ-ual windows or combined with picture windows for additional archi-tectural appeal.

COMPONENTS

FRAMETuscany is available in a variety of frame and trim choices. The 3-1/4” deep nail on frame is ideal for both New Construction andReplacement installations. We offer a standard nail fin frame for NewConstruction, a Block frame with no fins for insert Replacement andtwo different Z bar flange options, welded into the frame, for stuccoexterior Replacement applications. Frame components are made of ahigh performance uPVC, rigid polyvinyl chloride material, custom com-pounded for superior impact resistance, color retention and weatherresistance. The frame and sash corners are all precision mitered andfusion welded for a lifetime of air and water resistance.

The Tuscany product line meets or exceeds the AAMA/WDMA/CSA101/I.S.2/A 440-05 Industry Specification for Windows and Doors. Theyare also tested for Forced Entry Resistance to the ASTM F588-97 stan-dard, Grade 20 level. Each window is labeled with the NFRC Energy Starperformance information, based on the type of glazing you select.

AVAILABLE FRAME STYLES*Tuscany offers both New Construction and Replacementinstallation frames with specific features for each installation process.

NO NAIL-ON FIN:8125T Block Frame

1-5/8” Narrow Z-Bar2-1/8” Wide Z-Bar

INCLUDES NAIL-ON FIN:8125T 1-3/8” Nail Fin Setback

1-3/8” Nail Fin Setback, 2” Long Nail Fin with Optional:3/4” Flat J-Channel1” Contoured J-Channel2” Brickmold-style J-Channel

*Not all frame styles available at all Milgard locations.Contact your sales representative for more information.

BLOCK FRAMEThe block frame style is a window frame profile without a nailfin. The block frame allows an installer to insert the replace-ment window into the existing frame, without disturbing thehome’s internal or external wall surfaces. Installation methodincludes carefully drilling through the jamb.

Z-BAR (STANDARD AND WIDE)Two extruded Z-bar frame choices are available withTuscany™ series, standard (approximately 1-5/8”) and wide(approximately 2-1/8”). Z-bar installation, the method ofremoving the aluminum sash but leaving the frame in place, isideal with aluminum retrofit in stucco applications and cansave a significant amount on installation costs.

NAIL-ON FIN (1-1/4” OR 2” FIN WIDTHS AVAILABLE)A pre-punched nail flange extends around the perimeter frame,securing the window in rough openings and acting as a part ofthe flashing system.

FIN SETBACKS ARE AVAILABLE IN:1-3/8” nail fin setback (1-1/4” or 2” pre-punched nail flange)1” nail fin setback with stucco key (1-1/4” pre-punched nail flange)

The 2” pre-punched nail flange frame also has an exterior accessorygroove which allows for optional J-channel trim:

2” Brickmold1” Contour3/4” Flat

The 2” brickmold is sent separately to the field with the window,and snapped in-place after window installation. The 1” contour and3/4” flat options are welded in place at the factory. All trim optionsare extruded by Milgard and are available in white and tan.

WEEP SYSTEMHollow sill construction and offset weep baffles release anyaccumulated moisture from the sill pockets and help preventblow back, and helps control the water flow caused by acombination of wind and rain.

GLAZING MATERIAL AAMA-approved glazing tape adheres glass to the fixed andvent panel frames which seals and cushions the glass. Rigidvinyl setting blocks are used to support the unit above thesill, preventing glass shear (glass in the insulted unitbecomes offset). Extruded vinyl glazing (snap-in) bead isapplied around the interior edge. “Interior glazing” makesreplacement of glazing unit convenient; bead is mitered at45 degree for a finished look. Insulating dual glazed paneshas a 7/8'” overall glass thickness, are dual seal equivalent,sealed for optimal energy efficiency. All Tuscany™ windowscurrently meet or exceed EnergyStar® performance in all cli-mate zones with a 0.35 u-factor or lower. Specialty glassoptions are available upon request which can help achieve asmuch as a 26% improvement in u-factor. Specialty glassoptions for privacy, noise abatement and aesthetics are avail-able upon request.

8125T-3NOVEMBER 2008

Double Sliding WindowsTuscany™ Vinyl Replacement Window

WEATHERSTRIPPINGSilicone-treated water-repellent polypropylene fin seal weatherstrip-ping provides a durable, weather tight seal. The weatherstripping isinstalled in an integral, continuous keyway around 3-sides of thevent and on the fixed interlock.

ROLLER ASSEMBLYSelf-lubricating, wear resistant, dual nylon rollers with stainlesssteel axles provide flexible, free-wheeling, smooth and silent opera-tion. The adjustable rollers are engineered for reduction of frictionand torque on the operable vent frame.

LOCKING ASSEMBLYMilgard’s exclusive patent-pending SmartTouch™ direct action lockmechanism provides security and finger-tip operation. The lockengages when the window is closed. The lock offers a visual indicatorthat when the window is closed, it is also locked. The SmartTouch™lock is unlike most locking mechanisms available today as it requiresno squeezing or twisting to operate, making it ideal in designs for theaging in place.

SCREENMilgard's exclusive PureView™ screen frames are cambered alu-minum, assembled with rigid nylon corner clips. Rolled pull rail pro-vides simple installation and removal. Screens come standard withmatching frame color. PureView's innovative screen uses smallerdiameter yarn, improving the interior view. The finer mesh alsoreduces the appearance of a screen, enhancing curb appeal.PureView's fiberglass charcoal screen mesh is strong, durable andeasy to replace. All screens are under one year warranty.

ENERGY PACKAGESMilgard offers two energy efficiency upgrade packages that offerincreased U-Value performance. 3D™ and 3D MAX™ use the ENER-GY STAR® criteria from each climate zone and utilize materials thatare tailored to each individual climate to increase energy efficiency.The combination of the frame material, product design and glazingunit make up the 3 components of the energy packages. TheTuscany Series receives up to 23% increase in energy efficiency withthe 3D MAX package.

Note:• Packages available in most markets.

Please see your local sales representative for details.• 3D and 3D MAX energy packages are based on insulated glass units with

Single Strength (3/32") and Double Strength (1/8") glass. Some glass thickness-es and internal grid combinations may result in lower energy performance.

• 3D and 3D MAX energy packages are not included with the 8125 DoubleSlider, 5621WS Wide Stile Sliding Door, 8225 Double Hung when selectinggrids and are currently not available in breather tube applications.

OPTIONS

GRIDSAvailable in 5/8” flat or 1-1/16” sculptured aluminum profiles.Color-matched to frame. Simulated divided lite (SDL) gridsare also available in some locations, using 5/8” grids betweenthe glass panes for three-dimensional shadowing as well as7/8” contoured vinyl grid applied to the interior and exteriorglass panes.

All grids are color matched to frame in white or tan.

GLASSFull Lifetime Glass Breakage Warranty. For complete warran-ty details visit milgard.com.

TEST STANDARDSSee Test Reports/Energy Ratings section.

Caution: The use of petroleum based fuels or solvents as release agents instucco wall installations or glass cleaning will chemically attack materials usedin seals and other components, and voids the Milgard Warranty. The use of waxbased release agents is recommended.

Expanding foam for insulation purposes should not be used. Backer rod or loosepacked fiberglass bat insulation is recommended.

Double Sliding WindowsTuscany™ Vinyl Replacement Window

8125T-4 NOVEMBER 2008

Due to continual product research and development, details may be changed at any time. ©2008Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

8125T Assembly Drawing: 1-3/8” (35 mm) Nail Fin Setback

8125T-5NOVEMBER 2008

Horizontal View

8125T Assembly Drawing: 1-3/8” (35 mm) Nail Fin Setback

8125T-6NOVEMBER 2008Due to continual product research and development, details may be changed at any time. ©2008

Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

Vertical View

8125T Assembly Drawing: Block Frame (No Nail Fin)

Due to continual product research and development, details may be changed at any time. ©2008Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)8125T-7NOVEMBER 2008

Horizontal View

Vertical View

8125T Assembly Drawing: 1-5/8” (41 mm) Narrow Z-Bar with Block Frame (No Nail Fin)

8125T-8NOVEMBER 2008Due to continual product research and development, details may be changed at any time. ©2008

Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

Horizontal View

8125T Assembly Drawing: 1-5/8” (41 mm) Narrow Z-Bar with Block Frame (No Nail Fin)

Due to continual product research and development, details may be changed at any time. ©2008Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)8125T-9NOVEMBER 2008

Vertical View

8125T Assembly Drawing: 2-1/8” (54 mm) Wide Z-Bar with Block Frame (No Nail Fin)

8125T-10NOVEMBER 2008Due to continual product research and development, details may be changed at any time. ©2008

Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

Horizontal View

8125T Assembly Drawing: 2-1/8” (54 mm) Wide Z-Bar with Block Frame (No Nail Fin)

Due to continual product research and development, details may be changed at any time. ©2008Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)8125T-11NOVEMBER 2008

Vertical View

8125T Assembly Drawing: 1” (25 mm) Contoured J-channel

8125T-12NOVEMBER 2008Due to continual product research and development, details may be changed at any time. ©2008

Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

Horizontal View

8125T Assembly Drawing: 1” (25 mm) Contoured J-channel

Due to continual product research and development, details may be changed at any time. ©2008Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)8125T-13NOVEMBER 2008

Vertical View

8125T Assembly Drawing: 1-3/8” (35 mm) Nail Fin Setback with Optional 3/4” (19 mm) Flat J-channel

8125T-14NOVEMBER 2008Due to continual product research and development, details may be changed at any time. ©2008

Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

Horizontal View

8125T Assembly Drawing: 1-3/8” (35 mm) Nail Fin Setback with Optional 3/4” (19 mm) Flat J-channel

Due to continual product research and development, details may be changed at any time. ©2008Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)8125T-15NOVEMBER 2008

Vertical View

8125T Assembly Drawing: 2" (51 mm) Brickmold-style J-channel

8125T-16NOVEMBER 2008Due to continual product research and development, details may be changed at any time. ©2008

Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

Horizontal View

8125T Assembly Drawing: 2" (51 mm) Brickmold-style J-channel

Due to continual product research and development, details may be changed at any time. ©2008Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)8125T-17NOVEMBER 2008

Vertical View