Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
FG2DOUBLE GLAZED FRAMELESS PARTITION
SEPTEMBER 2014
TYPE THICKNESS GLASS TYPE SOUND REDUCTION
FG2 1090 92 MM 10MM TEMP + 10MM TEMP 45 dB
FG2 1090 92 MM 12MM TEMP + 10MM TEMP 45 dB
FG2 1090 92 MM 10MM TEMP + 10,76MM SOUND LAM 46 dB
FG2 1290 118 MM 10MM TEMP + 10MM TEMP 45 dB
FG2 1290 118 MM 12MM TEMP + 10MM TEMP 46 dB
FG2 1290 118 MM 10MM TEMP + 10,76MM SOUND LAM 47 dB
FG2 1090 92 MM 10MM TEMP + 12,76MM SOUND LAM 46 dB
FG2 1290 118 MM 48 dB10MM TEMP + 12,76MM SOUND LAM
TYPE SUMMARY
3000MM
2500MM
2400MM
2100MM
12MM TOUGHENED
10MM TOUGHENED
12MM LAMINATED
10MM LAMINATED
FLOOR
MAX. HEIGHT OF DIFFERENT GLASS TYPES
ISSUES TO FOCUS ON
The adjacent construction must at least have the same sound reduction. FG2 partition can carry itself, only and gives no support to other construction. The above construction is not movable.
Before installation the area must be cleaned and without any dust.
Special tools for moving the glass are required.
Access to lift in materials must be secured.
TOP, BOTTOM AND WALLSTARTER
WALLSTARTER
TOP
Bottom
Glass into profile MIN: 15mm
Glass into profile MIN: 10mm
3 3 3 3 1515
Space at profiles + between glass (if silikone joints)CALCULATION OF GLASS DIMENSIONS:
if 30mm profiles = Structure opening height - 32mm
WIDTH
Wallstarter: - 15MMInto frame: + 10MMSilicone joint between glass: - 3MM
Gla
ss in
to p
rofil
e M
IN:
15m
m
if 40mm profiles = Structure opening height - 32mm
HEIGHT
1090
1290
30MM MM PROFIL
40MM MM PROFIL
30MM MM PROFIL
40MM MM PROFIL
AGVP-15 + FG2 AVUF
AGGP-15 + AVUF 2
AGGP-15 + FG2 AVUF
AGVP-15 + AVUF 2
CORNER SOLUTIONS
1090: 90° CORNER SILICONE JOINTS 1290: 90° CORNER SILICONE JOINTS
135° CORNER SILIKOCE JOINTS
Glass indside
centre partition
Gla
ss o
utsi
de
cent
re p
artit
ion
Corner partition outside28MM 2MM
41MM 23MM
24M
M38
MM
12mm glas:41MM 25MM10mm glas:
54MM 36MM12mm glas:54MM 38MM10mm glas:
10m
m g
las:
26M
M38
MM
12m
m g
las:
45M
M57
MM
12m
m g
las:
45M
M55
MM
10m
m g
las:Glass indside
Gla
ss o
utsi
de
2MM2MM
1MM
68°
cent
re p
artit
ion
centre partition
FRAME FOR DG GLAZED DOOR
FRAME FOR 10MM GLAZED DOOR (34R)
FRAME FOR 40dB DOOR
FRAME FOR 35dB DOOR
FRAME FOR DOOR WITHOUT CLASSIFICATION
DOOR TYPE FRAME DIM LOCK BOX HINGES STD COLOURWHITEN-1
STD WHITESTD N-1STAINLESS- STEELSIMONSW
5655651498EL580PZW141GLUTZ
ATELIERSTUDIO
FG2 1090FG2 1290
COMMENTS TO FRAMECORNER MITRE JOINT.(ALL TYPES OF FRAME)
DG 4+6DG 4+4
SOLID35dB40dB
10MM GLASS 34HORZ34VERTFG2 1290 34R
FG2 1090 34R
DOOR SCHEDULE AND DETAILS 10mm in to frame +/- 1mm tolerance.
FATCS ON SOLID AND DG DOORS
Scandinavien Sash lock. (DEKO standard) Used in standard doors. Can be with or without predrilled hole for cylinder. Striking plate (RUKO 820).
Night latch. Automatic blocking and turnable latch.Latch can be turned off. Same striking plate as 565 (RUKO820)
Latch bolt lock. The lever latch is retracted with handle. Used in combination with electrical striking plate.
Electrical lock box. Striking plate 4630
Electrical lock box. Striking plate 4630
European Sash lock box. Drop shaped cylinder. Keyhole/cylinder below handle. Has its own striking plate
Lock box used in Switzerland. Round cylinder. Keyhole/cylinder below handle. Same striking plate as PZW141.
565
560
1498
EL 580
EL 582
PZW141
GLUTZ
USABLE LOCK BOXES
BOTTOM SOLUTIONS
HINGES:
DEKO Standard
WIPE STRIP
OR THICKER
3 m
m
9 m
m 20 m
m
40 mm DOOR LEAF
FINISHED FLOOR
3 m
m
8 m
m
20 m
m
OR THICKER
10 m
m
FLOOR FINISH
40 mm DOOR LEAF
FLOOR FINISH10 m
m
5 m
m
40 mm DOOR LEAF
JOINT
OR THICKER
40 mm DOOR LEAF
10 m
m
30
15
45
14,5
10
FLOOR
FLOOR
10
RUBBER STRIP(SLEEPEER)
ALUMINIUM FLOOR PROFILE
HARDWOOD FLOOR PROFILE
MATERIALS
ITEMNUMBER DESCRIPTION NOTESLENGHT UNIT
374862
374876
374877
374998
414148
AGVP-15MM/W JOINTSTRIP N1
AGVPA-15MM/W JOINTSTRIP N1
AGVPT-15MM N1
FG2 AVUF 1090
AGVP-15 N1 90GR FAST CORNER
MINI PVG GREY
754826 RUBBER STRIP GREY FOR 12,8MM GLASS
300
300
300
300
300
40M
25M
PCS.
PCS.
PCS.
PCS.
PCS.
ROLL.
ROLL.
991310 FRAME FG2 1090
374997 ADFU FG2 300 PCS.
754833
754829
515482
785993
785998
785997
795953
TECHNIFLEX JOINT 3X9
TECHNIFLEX JOINT 3X7.5
ROLL.
ROLL.
16X18X100MM. PLASTIC CHOCKS FOR FG PCS.
PUTTY KNIFE PREPARED FOR RUBBER STRIP
10X7,5MM CHOCK FOR TECHNIFLEX (TIL 10MM GLASS)
12X9MM CHOCK FOR TECHNIFLEX(TIL 12MM GLASS)
CLEANING SET FOR GLASS
PCS.
PCS.
PCS.
UNTS.
FOR WALL
FOR FRAME
SUPPORT TOOLS
754821 RUBBER STRIP GREY FOR 12MM GLASS 25M ROLL.
414156 PVG 8MM GLASS GREY 40M ROLL.
PCS.
754851 CRYSTAL FIX SILICONE BULLIT.
if FG2 1290, this must be changed to 313757 AVUF-2 N1
if FG2 1290 this must be a 1290 frame instead.
999999 ANGEL BRACKET 30X25X25MM (SANINR. 281889) PCS.
745849 ADJUSTMENTS CHOCKS BOX.
374999
12M
12M
USED WHEN GLASS IS 12 MM
USED WHEN GLASS IS 10 MM
USED FOR 10 MM GLASS
FOR 10 MM GLASS
FOR 12 MM GLASS
USED FOR 12 MM AND 12.8 MM GLASS
*
*
* NEW ITEMNUMBERS
INSTALLATION INSTRUCTIONS
At 90° corner AGVPT FAST CORNER (37xxxx) is used on the outer side. Inside the profiles are pushed together.
A cutout is made in the AGVPT (374877) with a Feincutter, giving space for the plastic chock on which the glass is placed (555482).
6060
100
100
Profile joints at wallstarter and floor. The wallstarter is the continu-ous part, giving the same expres-sion at frame. Sawcut are finished by apolishing block.
1. Step: Place profiles for first layer of glass.
2. Step: Measure to door hole.
3. Step: Place profiles for second layer of glass.
4. Step: Install AVUF (profile in the midddle) incl. of PVG. Notes that it has to click into AGVP-15 / AGVPT-15
5. Step: Install frame. See instructions below.
6. Step: First layer of glass must be installed and cleaned on the inside
7. Step: Second layer of glass must be cleaned on the inside and then installed.
8. Step: AGVPT-15 + rubber strip to be fixed on the two outsides of the partition.
30/40
30/40
PARTITION.
FRAME.
1. Step: Frame pieces are assembled.
3. Step: ADFU FG2 is being placed in the back of the frame.
4. Step: Put PVG into AVUF2 and glue it to the MDF back of the frame.
2. Step: Frame is fixed in bottom back to the floor with angle brackets.