double cleanse - Dermalogica

double cleanse

double cleanse

key steps1. First cleanse: PreCleanse2. Perform cleanse routine then emulsify and remove3. Perform Face Mapping® skin analysis4. Second cleanse: prescribed cleanser5. Perform cleanse routine then remove

product boost!Mix one of these options to boost second cleanser: • ½ tsp Daily Microfoliant® • 1 pump Exfoliant Accelerator 35

• ½ tsp MultiVitamin Thermafoliant® • 2-3 drops Calming Botanical Mixer • 1 pump Multi-Active Scaling Gel

benefit: this Double Cleanse will remove both oil and water-soluble debris from the skin’s surface, ensuring a professional and more thorough level of clean

step-by-step instructions:1. Cleanse the eyes and lips with PreCleanse on

damp cotton.

2. Perform first cleanse with PreCleanse, then add water to emulsify and remove.

3. Perform Face Mapping® skin analysis.

4. Perform second cleanse with prescribed cleanser according to the client’s skin type/condition.

5. Steam may be used at this time.

6. Remove product with sponges and warm water.

tip:Perform a thorough and rhythmic Double Cleanse routine to ensure all traces of debris have been removed from the skin.

oily skin:Active Clay Cleanser

normal/combination skin: Special Cleansing Gel

dry skin:Intensive Moisture Cleanser

sensitive skin:Retail option: UltraCalming™ Cleanser

acne/breakouts:Special Cleansing Gel

Boost: Exfoliant Accelerator 35 or Multi-Active Scaling Gel

ageing/pigmentation:Skin Resurfacing Cleanser

product recommendations

brushesbenefit: deep cleanse with mild exfoliation

double cleanse

key steps1. First cleanse: PreCleanse2. Perform Face Mapping® skin analysis3. Second cleanse: prescribed cleanser4. Apply damp brush to skin5. Work brush in circular motions

product boost!Mix one of these options to boost second cleanser: • ½ tsp Daily Microfoliant® • ½ tsp MultiVitamin Thermafoliant®

• 1 pump Exfoliant Accelerator 35 • 2-3 drops Calming Botanical Mixer • 1 pump Multi-Active Scaling Gel

contraindications:Medically prescribed exfoliants, impaired barrier, inflamed active acne, recently resurfaced or waxed skin.


damp cotton.





6. Dampen the brush head with water and apply to the skin.

7. Gently work in circular motions around the face for about 1-2 minutes.

8. Remove any remaining cleanser with sponges and warm water.

tip: Brushes may be used with PreCleanse, once emulsified.





sensitive skin:Retail option: UltraCalmingTM Cleanser




ultrasonic bladebenefit: therapeutic ultrasound provides deeper cleanse with added exfoliation

double cleanse

key steps1. First cleanse: PreCleanse2. Perform Face Mapping® skin analysis3. Second cleanse: prescribed cleanser4. Select exfoliation mode5. Hold blade at 45 degree angle6. Perform cleanse routine following diagram

product boost!Mix one of these options to boost second cleanser: • ½ tsp Daily Microfoliant® • 1 pump Exfoliant Accelerator 35

• ½ tsp MultiVitamin Thermafoliant • 2-3 drops Calming Botanical Mixer • 1 pump Multi-Active Scaling Gel

step-by-step instructions:1. Cleanse the eyes and lips with PreCleanse on damp

cotton.





6. Select exfoliation mode. Use the blade at a 45 degree angle.

7. Hold skin taut. Begin on neck using light upward strokes. Cover all areas of the face and neck. Periodically wipe debris off blade with cotton pad.


tips:• Ultrasonic blade may be used with PreCleanse, once emulsified.

• Choose a lower setting for sensitive skin

• Skin should be damp and blade should glide easily. If more moisture is required, add water to face with wet hands.










hydro/microdermabrasionbenefit: deeper cleanse with added mechanical exfoliation

double cleanse

key steps1. First cleanse: PreCleanse2. Perform Face Mapping®

skin analysis3. Second cleanse:

prescribed cleanser

skin textureuneven/ coarse

coarse/ even

even/ normal

normal/ sensitive

sensitive/ thin

diamond tipvery

coarse coarse moderate/ medium fine very fine

product boost!Mix one of these options to boost second cleanser:• 1 pump Exfoliant Accelerator 35

• 1 pump Calming Botanical Mixer

• 1 pump Multi-Active Scaling Gelvacuum level

high medium low

4. Select tip 5. Adjust vacuum level6. Perform cleanse routine

following diagram

*check manufacturer’s directions of use regarding working with products



damp cotton.





6. Select appropriate tip according to the client’s skin texture.

7. Adjust vacuum level: low for sensitive, medium for normal, high for coarse.

8. Perform the cleanse routine following the diagram on reverse. Move from the forehead down.


tips:• Skin should be damp and hand piece should glide easily. If more moisture is required, spritz with prescribed Dermalogica toner or add water to allow for better glide.

• Avoid working over clay and non water soluble oil based products.









resurfacing

benefit: professional exfoliation removes dulling dead skin cells, speeds up cell turnover and increases product efficacy

resurfacing

key steps1. Choose prescribed exfoliant and apply to skin2. Lightly manipulate in circular motions3. Remove according to product directions

product boost!• Reference the exfoliation chart in The Book on the Education Centre for exfoliant selections and instructions.

• Customise steam towels and/or water with Calming Botanical Mixer.

step-by-step instructions:1. Choose prescribed exfoliant according to the client’s

skin type/condition.


3. Apply exfoliant and gently manipulate in circular motions.

4. Remove exfoliant with sponges, warm water and steam towel according to product directions.

tips:• Depending on the exfoliant choice, removal will vary.

• Use with caution around eyes and lip area.

• Daily Microfoliant®

(product boost: Multi-Active Scaling Gel)

• MultiVitamin Thermafoliant®

• Daily Superfoliant™


• Purifying Masque + Exfoliant(product boost: Exfoliant Accelerator 35)

• MultiVitamin Power Exfoliant

• Exfoliant Accelerator 35

exfoliant choices

contraindications:Medically prescribed exfoliants, inflamed active acne, impaired barrier, recently resurfaced or waxed skin.

brushesbenefit: added mechanical exfoliation

resurfacing

key steps1. Choose prescribed exfoliant2. Apply damp brush to skin3. Work brush in circular motions

product boost!Mix one of these options to boost exfoliation: • 1 pump Exfoliant Accelerator 35 • 1 tube MultiVitamin Power Exfoliant

• 1 pump Multi-Active Scaling Gel (Daily Microfoliant® or Daily SuperfoliantTM)

When a double cleanse removal is required, choose one of these combinations to boost exfoliation:

• 1st PreCleanse 2nd Daily Microfoliant® or Daily SuperfoliantTM • 1st Daily Microfoliant® 2nd Daily Microfoliant®

step-by-step instructions:1. Choose and apply prescribed exfoliant according

to the client’s skin type/condition.


3. Dampen the brush head with water and apply to the skin.

4. Gently work in circular motions around the face.

5. Remove exfoliant with sponges, warm water and steam towel according to product directions.






exfoliant choices


ultrasonic bladebenefit: therapeutic ultrasound provides added exfoliation

resurfacing

key steps1. Choose prescribed exfoliant2. Select exfoliation mode3. Hold blade at 45 degree angle4. Perform exfoliation routine following diagram

product boost!Mix one of these options to boost exfoliation: • 1 pump Exfoliant Accelerator 35 • 1 tube MultiVitamin Power Exfoliant

• 1 pump Multi-Active Scaling Gel (Daily Microfoliant® or Daily SuperfoliantTM)

When a double cleanse removal is required, choose one of these combinations to boost exfoliation:

• 1st PreCleanse 2nd Daily Microfoliant® or Daily SuperfoliantTM • 1st Daily Microfoliant® 2nd Daily Microfoliant®

step-by-step instructions:1. Choose and apply prescribed exfoliant according to

the client’s skin type/condition. Steam may be used at this time.

2. Select exfoliation mode and use blade at a 45 degree angle.

3. Hold skin taut. Begin on the neck and chest using light upward strokes. Cover all areas of the face and neck. Periodically wipe debris off blade with cotton round.

4. Remove exfoliant with sponges and warm water or steam towel removal according to product directions.

tips:• Skin should be damp and blade should glide easily. If more moisture is required, add water to face with wet hands.






• MultiVitamin Power Exfoliant


exfoliant choices


hydro/microdermabrasionbenefit: increased level of mechanical exfoliation

resurfacing

key steps1. Choose prescribed exfoliant2. Select diamond tip3. Adjust vacuum level4. Perform exfoliation routine following diagram

skin textureuneven/ coarse

coarse/ even

even/ normal

normal/ sensitive

sensitive/ thin

diamond tipvery

coarse coarse moderate/ medium fine very fine

product boost!Mix one of these options to boost exfoliation:• 1 pump Exfoliant Accelerator 35

vacuum levelhigh medium low

*check manufacturer’s directions of use regarding working with products


step-by-step instructions:1. Choose and apply prescribed exfoliant according

to the client’s skin type/condition.


3. Select appropriate diamond tip according to the client’s skin texture.

4. Adjust vacuum level: low for sensitive, medium for normal, high for coarse.

5. Perform the exfoliation routine following the diagram on reverse. Move from the forehead, down.

6. Remove exfoliant with sponges and warm water according to product directions.

tips:

• Skin should be damp and hand piece should glide easily. If more moisture is required, spritz skin with prescribed Dermalogica toner or add water to allow for better glide.

• Use precaution when exfoliating over inflamed active acne.


exfoliant choices

extractions

prep benefit: helps dilate follicles, soften sebum and comedones to prepare for professional extractions, without drying or irritating the skin

extract benefit: the Dermalogica Extraction Technique is an effective and safe manual method to remove comedones and impactions

post benefit: helps soothe inflamed, irritated skin while creating an antiseptic environment

extractions – prep, extract, post

contraindications: Impaired barrier, inflamed acne lesions. Do not extract pustules or papules.

prep step-by-step:1. Dispense ½ - 1 pump of Multi-Active Scaling Gel into a cup. Using a Fan Masque Brush, apply a

thin layer to areas of congestion.2. Allow gel to activate and soften impactions for 3 minutes.

extract step-by-step:1. Apply gloves and wrap your index fingers with tissue.2. Stretch out the skin around the comedone, keeping your index fingers parallel.3. Pushing your index fingers closer together, create a mound underneath the comedone.4. Begin to rock, roll and wiggle your index fingers to help release the impaction.5. Wipe comedone debris down and away from the follicle.6. Once completed, remove Multi-Active Scaling Gel with sponges and water.

post step-by-step:Dispense Post Extraction Solution to dry cotton pads and apply to areas you extracted.

tips:

• You may use steam during extractions to help soften the comedones.

• Try working from different angles around each impaction.

galvanic desincrustationbenefit: increases alkalinity to help emulsify sebum, dilate follicles and soften comedones


prep key steps1. Cover positive electrode with damp sponge or gauze and

connect to client2. Apply Multi-Active Scaling Gel to comedones3. Saturate cotton with Multi-Active Scaling Gel and attach to working negative electrode4. Move the working electrode over congested areas5. Remove Multi-Active Scaling Gel with sponges and water

extractFollow the Dermalogica Extraction Technique

postApply Post Extraction Solution or use Direct High Frequency over dry gauze

tips:• Skin should be damp with Multi-Active Scaling Gel and electrode should glide easily. If more moisture is required, apply

more Multi-Active Scaling Gel to allow for better glide.

• Add Calming Botanical Mixer to Multi-Active Scaling Gel to help with any sensitivities.

• Do not break contact with skin while machine is on. Keep electrode moving.

• Do not exceed 3 milliamps.

step-by-step instructions:1. Cover positive electrode with damp sponge

or gauze and connect to client.

2. Dispense ½ - 1 pump of Multi-Active Scaling Gel into a cup. Using a Fan Masque Brush, apply a thin layer to areas of congestion.

3. Saturate cotton/gauze with Multi-Active Scaling Gel and attach to working negative electrode.

4. Contact the working negative electrode to skin. Turn the machine on and slowly increase intensity to proper level.

5. Move working negative electrode over the areas where Multi-Active Scaling Gel was applied.

6. Turn machine down and off.

7. Follow the Dermalogica Extraction Technique. Remove Multi-Active Scaling Gel with sponges and water.

8. Apply Post Extraction Solution or use Direct High Frequency over dry gauze.

contraindications:Metal implants, pacemaker, body piercings, medically prescribed exfoliants, impaired barrier, recently waxed skin, pregnant or trying to become pregnant.

ultrasonic bladebenefit: increases product penetration to help emulsify sebum, dilate follicles and soften comedones


prep key steps1. Apply Multi-Active Scaling Gel to comedones2. Select penetration mode3. Hold flat side of blade at 45 degree angle 4. Perform “buttering” technique


postApply Post Extraction Solution and/or use Direct High Frequency over dry gauze

step-by-step instructions:1. Dispense ½ - 1 pump of Multi-Active Scaling Gel into a cup. Using a Fan Masque Brush, apply a

thin layer to areas of congestion.

2. Select clear mode and place flat side of blade at 45 degree angle. Apply using a “buttering technique.”

3. Working hand should be in contact with the metal plates on both sides of the blade. Non-working hand maintains contact with skin and stays within 2 inches of blade.

4. Work over congested areas, then follow with the Dermalogica Extraction Technique.

5. Remove Multi-Active Scaling Gel with sponges and water.


tips:• Skin should be damp with Multi-Active Scaling Gel and blade should glide easily. If more moisture is required, apply more

Multi-Active Scaling Gel to allow for better glide.



microcurrent specific iontophoresisbenefit: increases product penetration to help emulsify sebum, dilate follicles and soften comedones


prep key steps1. Protect eyes with gauze and apply Multi-Active Scaling Gel

to comedones2. Select specific iontophoresis on negative mode3. Perform small movements over congested areas


postApply Post Extraction Solution and/or use Direct High Frequency over dry gauze


step-by-step instructions:1. Dispense ½ - 1 pump of Multi-Active Scaling Gel into a cup. Using a Fan Masque Brush, apply a

thin layer to areas of congestion.

2. Turn modality on and select specific iontophoresis negative mode.

3. Saturate probes in Multi-Active Scaling Gel from cup.

4. Work over congested areas using a figure 8 or feathering movement and keep probes 2 inches apart. Follow with the Dermalogica Extraction Technique.

5. Remove Multi-Active Scaling Gel with sponges and water.


tips:• Skin should be damp with Multi-Active Scaling Gel and probes should glide easily. If more moisture is required, apply

more Multi-Active Scaling Gel to allow for better glide.


• Keep probes moving.

direct high frequencybenefit: creates a germicidal environment to help heal extracted areas and inflamed acne lesions

extractions – post

key steps1. Apply dry gauze to skin

2. Place electrode in working hand

3. Make contact with finger to electrode

4. Apply electrode over gauze to skin, then remove finger

5. Move with light circular movements across skin

6. Place finger back on electrode to break contact and remove from skin

contraindications:Metal implants, pacemaker, medically prescribed exfoliants, impaired barrier, pregnant or trying to become pregnant.

step-by-step instructions:1. After extractions, apply Niacinamide IonActiveTM Serum on dry gauze to skin and gently insert glass electrode into hand piece.

2. Turn machine on and make contact with finger to electrode before placing on the skin.

3. Once electrode is in contact remove finger from electrode and increase intensity.

4. Move lightly across the gauze on the skin in circular movements. When completed, place finger back on electrode and remove.

5. Turn machine off and wipe skin with Post Extraction Solution on cotton.

tip: • Gauze can be folded up to ¼ inch to increase the germicidal environment.

touch therapies

pressure point massagebenefits: • great for all skin conditions

• combines aromatherapy, acupressure and lymphatic drainage

• eliminates toxins and relaxes tissues

touch therapies

products Select Soothing Additive, Revitalizing Additive, Clearing Additive, Calming Botanical Mixer

contraindications:Injuries, surgery, recent facial injections. If contraindicated to essential oils (pregnancy and/or allergy), please use Calming Botanical Mixer.

step-by-step instructions:1. Apply additive or botanical mixer onto skin

and begin inhalation therapy.

2. Thumb acupressure vertical on centre of forehead.

3. Thumb lymph drain vertical on centre of forehead.

4. Thumb acupressure horizontal on entire forehead.

5. Palmar pad lymph drain on entire forehead.

6. Cushioned middle finger lymph drain above cheekbone from nose to ears then repeat the same movement below cheekbone (alternate above and below).

7. Drain the jawline from chin to ears, then massage ears.

8. Drain forehead then jawline (repeat 5 and 7). Alternate.

9. Scoop jawline from chin to ears, glide down neck, across collarbone to shoulders.

10. Press down on front of shoulders then pivot and press down the top of shoulders.

11. Slide up back of shoulders and work occipital ridge.

12. Optional: cradle neck movement or work reflex point on big toe.

touch therapiesstress relief scalpbenefits: • great for all skin conditions

• loosens tension on the scalp, forehead and neck

• gentle pressure movements that calm and relax

productsSoothing Additive, Revitalizing Additive, Clearing Additive or Calming Botanical Mixer


Opening Movements:1. Hara to head2. Inhalation therapy 3. Hands on head4. Shoulder rock and press5. Trapezius thumb frictions6. Neck squeeze

Working Movements:7. Ear frictions8. Scissor ears9. Pressure points behind ears10. Light comb11. Deep comb (scratch & pull)12. Pressure point scalp13. Scalp waves14. Scalp fists15. Shampooing16. Light comb

Closing Movements:17. GV20 crown pressure point18. Hand on hand pressure19. Cover ears20. Light comb (cat stroke)

Optional:21. Steam towel

step-by-step instructions:

touch therapiestargeted neck and shoulderbenefits: • great for all skin conditions

• promotes relief of stress on the head, neck and shoulders

• focuses on full range of upper body muscle tension

productsSoothing Additive, Revitalizing Additive, Clearing Additive or Calming Botanical Mixer with Massage Gel-Cream

contraindications:Head/neck/shoulder injuries and/or surgery. If contraindicated to essential oils (pregnancy and/or allergy), please use Calming Botanical Mixer.

step-by-step instructions:1. Preparation techniques (apply and spread).

2. Shoulder sweep and squeeze (left side only).

3. Neck lengthening petrissage (left side only).

4. Repeat steps 2 and 3 on right side.

5. Neck pump (each side).

6. Smooth and drain.

7. Scapula release (each side).

8. Stretch and finish.

9. Finish with removal of Massage Gel-Cream with steam towel.

touch therapiesage reversalbenefits: • ideal for mature or prematurely-ageing skin

conditions and concerns

• helps smooth and diminish visible signs of ageing

• targeted movements stimulate skin renewal and repair

productsSoothing Additive, Revitalizing Additive, Clearing Additive or Calming Botanical Mixer with Massage Gel-Cream

contraindications:Injuries, surgery, recent facial injections and inflammation. If contraindicated to essential oils (pregnancy and/or allergy), please use Calming Botanical Mixer.

step-by-step instructions:Opening Movements:1. Begin inhalation therapy2. Application of massage

medium3. Spreading movements

Working movements - temples, forehead:4. Circles on temples5. Palmar drain on forehead6. S and smooth with thumbs7. Brow lift and smooth

Working movements - eyes:8. T-cross on temples9. Figure 810. Circles around eyes

Working movements - cheeks, mouth, jaw:11. Cheek hooks12. Alternating mouth smooth13. Zygomatic lift14. Jaw pulls

Working movements - neck, chest: 15. Platysma zig zag16. Chest smooth17. Pectoralis stretch18. SCM stretch/back of neck

Closing movements: 19. Pendulum

touch therapiesultracalming™ skin relief massagebenefits: • soothes sensitive or sensitised skin conditions

• relieves stress tension in face, sinuses, head and eye muscles

• improves breathing, calms the psyche and relaxes the body

productsSoothing Additive or Calming Botanical Mixer



1. Press product onto skin and begin inhalation therapy.

2. Clockwise circles on sternum.

3. Shoulder press down then forward.

4. Occipital ridge, stretch spine.

5. Pulse with middle fingers on stress point (GV16).

6. Stroke jaw and cheeks then forehead (alternate).

7. Pulse with middle finger on temples (tai yang).

8. Thenar eminence thumb stroke over brows then forefinger stroking under eyes draining to temporal node.

9. Stroke under eyes with middle finger and pinch eyebrows between thumb and forefinger to end of eyebrows.

10. Pulse with the middle finger at the inner eye soc ket (B1).

11. Move up to the inner brow bone and pulse (B2).

12. Pulse at end of brow near temples (TH23).

13. Using sides of thumbs, press by rolling on the zygomatic bone at the midpoint of each eye (S2).

14. Drain above and under the cheekbone (LI2).

15. Repeat 8 and 6.

16. Finger stroke outward lightly up the chest, neck and face. Finish by covering eyes and feather off over eyelids.

deep treatment

deep treatment

key steps1. Apply prescribed IonActive™ Serum

2. Follow with application of prescribed professional masque

3. Remove with warm steam towel customised with Calming Botanical Mixer

benefits: intensifies treatment results with serums and masques to treat various skin conditions

step-by-step instructions:1. Apply prescribed IonActive™ Serum to client’s skin.

2. Follow with prescribed professional masque over IonActive™ Serum.

3. Allow products to process and penetrate on client’s skin.

4. Remove excess product with warm steam towel or sponges.

tips:• You may use cool globes or warm stones over prescribed products to enhance treatment.

• You may perform a Touch Therapy such as Stress Relief Scalp or Targeted Neck and Shoulder during Deep Treatment.

• IonActive™ serums and masques can be patchworked to address various conditions.

• Skin needling may be used with IonActive™ Serums.

deep treatment

key steps1. Cover negative electrode with damp sponge

or gauze and connect to client

2. Attach the working positive electrode

3. Apply prescribed IonActive™ Serum

4. Move working electrode over skin

product boost!Add one of these masques over IonActive™ Serum:

• Colloidal Masque Base • Conductive Masque Base • Clinical Oatmeal Masque • MultiVitamin Power Recovery® Masque

galvanic iontophoresisbenefit: increases product penetration to boost efficacy of products

step-by-step instructions:1. Cover negative electrode with damp sponge and connect to client.

2. Attach the Roller for entire face or Ball for eyes working positive electrode.

3. Apply prescribed IonActive™ Serum to client’s skin. Professional masque may be applied over.

4. Contact the working positive electrode to skin. Turn the machine on and slowly increase intensity.

5. Move the working positive electrode over all of face, neck and chest.

6. When complete, turn machine down and off.

7. If masque was applied, remove excess product with warm steam towel and sponges.

contraindications:Metal implants, pacemaker, body piercings, impaired barrier, pregnant or trying to become pregnant.

tips:• Skin should be damp with the products applied and electrode should glide easily. If more moisture is required, spritz skin

with prescribed Dermalogica toner to allow for better glide.

• Do not break contact with skin while machine is on and keep electrode moving.

• Do not exceed 3 milliamps.

deep treatment



ultrasonic bladebenefit: increases product penetration to help boost efficacy of products


2. Select penetration mode

3. Place flat side of blade at 45 degree angle

4. Perform routine

step-by-step instructions:1. Apply prescribed IonActive™ Serum to client’s skin. Professional masque may be applied over

IonActive™ Serum.

2. Select penetration mode and place flat side of blade at 45 degree angle. Apply using a “buttering” technique.

3. Keep working hand in contact with the metal plates on both sides of the blade, while non-working hand should maintain contact with client’s skin and remain within 2 inches of blade.

4. Work over the face, neck and chest, then turn device off.



tips:• Skin should be damp and blade should glide easily. If more moisture is required, spritz skin with prescribed

toner for better glide.

deep treatment



microcurrent specific iontophoresisbenefit: increases product penetration to help boost efficacy of products


2. Select specific iontophoresis on positive mode

3. Perform routine small movements over the product

step-by-step instructions:1. Apply prescribed IonActive™ Serum to client’s skin. Professional masque may be applied over

IonActive™ Serum.

2. Turn modality on and select specific iontophoresis positive mode.

3. Saturate probes in toner from a cup.

4. Work over the face, neck and chest using a figure 8 or feathering movement and keep probes 2 inches apart.

5. If masque was applied, remove excess product with warm steam towel or sponges.


tips:• Skin should be damp with the products applied and probes should glide easily. If more moisture is required, spritz skin

with prescribed Dermalogica toner to allow for better glide.

• Select a lower setting for sensitive/thinner skin or a higher setting for more resistant/thicker skin.

• Keep probes moving.

deep treatmentLED (light emitting diode)benefit: stimulates and energises cellular activity and each wavelength or colour of light treats different skin conditions

key steps1. Apply prescribed LED-friendly products2. Apply protective eyewear to client and yourself3. Select desired LED light, rate and time4. Turn machine on and position LED over client’s face5. Turn off machine when complete

LED-friendly product selections• Hyaluronic Acid, Oligopeptide, Niacinamide IonActive™ Serums• Colloidal Masque Base• Conductive Masque Base

step-by-step instructions:1. Apply appropriate LED-friendly products to client’s skin.

2. Apply protective eyewear to both client and yourself.

3. Select desired LED light, rate and time.

4. Turn machine on and position LED over client’s face.

5. Turn off machine when complete.


contraindications:Hypersensitivity to light (photo-allergy), tendency towards photo-toxic reactions, taking of photo-sensitising or photo-toxic medication, using Retinol 1%, epilepsy, pregnancy, panic attacks and claustrophobia.

dermal layering

dermal layering

key steps Apply prescribed products in order:

1. Spritz toner over face, neck and chest

2. Apply prescribed eye treatment

3. Apply prescribed moisturiser over face, neck and chest

4. Finish treatment with sunscreen Option: SkinPerfect Primer SPF30

5. Complete Skin Fitness Plan

tip:Use Ultrasonic blade on penetration mode to penetrate water-based moisturisers (not with SPF).

benefit: hydrates, seals and protects the skin to complete the treatment

suggested options:

oily skin:

Multi-Active TonerActive Moist

Solar Defense Booster SPF50Prisma Protect SPF15

normal/combination skin:

Multi-Active TonerSkin Smoothing Cream


dry skin:

Multi-Active TonerIntensive Moisture Balance


sensitive skin:

Redness Relief EssenceBarrier Defense Booster

Calm Water GelInvisible Physical Defense SPF30

acne/breakouts:

Multi-Active TonerActive Moist

Solar Defense Booster SPF50Retail option: Oil Free Matte SPF30

ageing/pigmentation:Antioxidant HydraMistSuper Rich Repair or

Dynamic Skin Recovery SPF50

all skin types: Stress Positive Eye LiftMultiVitamin Power Firm

advanced treatments

advanced treatments

key steps1. Remove excess oil from skin

2. Completely dry skin

3. Perform dermaplaning

dermaplaningbenefit: increased mechanical exfoliation, removes fine facial hairs and prepares skin for better product penetration

step-by-step instructions:1. Start with PreCleanse, followed by a Face Mapping® skin analysis.

2. Second Cleanse: Using the prescribed cleanser, lightly perform a cleanse routine, then remove.

3. Dermaplaning should be performed in the beginning of your Resurfacing Module.

4. Apply Post Extraction Solution to ensure that any excess oils have been removed. The skin needs to be completely dry before proceeding with dermaplaning.

5. Perform the specified dermaplaning routine according to the manufacturer’s directions.

6. After dermaplaning, complete a customised professional exfoliation according to your client’s skin concerns.

7. Proceed with the rest of your modules for either ProSkin 30 or ProSkin 60.

tips:• Avoid extractions if skin is sensitised.

• During your Deep Treatment Module, customise your steam towels with Calming Botanical Mixer for product removal.

• During your Dermal Layering Module, apply Invisible Physical Defense SPF30 or SkinPerfect Primer SPF30 for sun protection.

contraindications:Current inflamed acne lesions, skin cancer, active cold sores, uncontrolled diabetes, dermatitis, open skin lesions, use of Accutane currently or within the past 6 months and/or use of prescription Retinol within a week of treatment.

advanced treatments

key steps1. Apply protective eyewear to client and yourself

2. Apply ultrasound gel

3. Perform IPL

4. Remove ultrasound gel

IPLbenefit: professional Intense Pulsed Light treatment helps even skin tone and texture

step-by-step instructions:Consultation:

1. Ensure your client fills out a Fitzpatrick scale chart, and has no contraindications to light therapy.

Double Cleanse (10 mins):

2. Start with PreCleanse, followed by a Face Mapping® skin analysis. Use only Special Cleansing Gel or UltraCalmingTM Cleanser for the second cleanse. Ensure skin is fully cleansed with no residue remaining.

Omit Resurfacing Module to avoid irritation.

IPL (30 mins):

3. Prepare client’s eye protection. Apply 2x2 gauze on the eyes first, then apply goggles.

4. Apply a medium to thick layer of cooling ultrasound gel all over the face, using a spatula. Colloidal Masque Base can be used as an alternative.

5. Begin IPL treatment according to the manufacturer’s guidelines.

6. Remove ultrasound gel with spatula first, then damp gauze. (Dry gauze may cause further irritation, as skin could be more sensitive after the IPL treatment.)

instructions continued on next card

step-by-step instructions (continued):Deep Treatment (10 mins):

7. Apply either Colloidal Masque Base or Clinical Oatmeal Masque if client is more reactive. (The skin may feel warm, and erythema may be present immediately post-IPL; therefore, only a cooling and calming masque should be incorporated into this treatment.)

8. Fill out your client’s treatment plan while you wait, including the settings on the IPL machine before turning the machine off.

9. Remove masque with cool water and sponges or cool towel.

Dermal Layering (10 mins):

10. Tone – use Multi-Active Toner or Redness Relief Essence.

11. Serum (optional) – use either UltraCalmingTM Serum Concentrate or Barrier Defense Booster. This is a great treatment for skin with rosacea / telangiectasia so UltraCalmingTM targeted treatments may be beneficial.

12. Moisturiser – use Calm Water Gel or Barrier Repair. (Avoid moisturisers with active ingredients such as Vitamin A, hydroxy acids or other exfoliating ingredients, as this may cause further irritation post-treatment.)

13. Protect – use Invisible Physical Defense SPF30 or Solar Defense Booster SPF50.

contraindications on back

contraindications:Recent sunburn or suntan; unprotected sun exposure, tanning bed or solarium use 4 weeks prior to treatment; pregnancy; breastfeeding; cancer; lupus; hypopigmentation (e.g. vitiligo); history of seizures; history of keloid scarring; severe dermatitis, active inflammatory acne or eczema (within the treatment area); active infections; Accutane use in the last 6 months; diabetes medication; herpes simplex outbreak (within the treatment area); dark skin; Vitamin A or hydroxy acids (retinoic acid, tretinoin/Retin-A, Accutane, hydroxy acids) used within 60 days of treatment; photosensitising medications; presence of a pacemaker; presence of surgical metal pins or plates under the skin of treatment area; use of St. John’s Wort within three months prior to treatment; blood-thinning agents (aspirin, ibuprofen, or Aleve used within one week of treatment, anticoagulants).

tips:• Best results are achieved with a series of three to six treatments, usually a month apart.

• Explain the IPL experience to client so they know what to expect.

• Provide information on the expected results.

advanced treatments

key steps1. Optional (according to your state legislation): Apply numbing cream, process and remove

2. Degrease skin

3. Apply skin-specific IonActive™ Serum

4. Perform microneedling

microneedlingbenefit: improves the appearance of acne scarring, skin ageing, texture and skin tone


Double Cleanse (10 mins):

1. Start with PreCleanse, followed by a Face Mapping® skin analysis.

2. Second cleanse: Using the prescribed cleanser, lightly perform a cleanse routine, then remove.

Microneedling (40 mins):

3. Optional (according to your state legislation): apply numbing cream and allow the cream to take effect per product guidelines.

4. Perform a Stress Relief Scalp or Targeted Neck and Shoulder Touch Therapy.

5. Remove numbing cream with one cleanse of Special Cleansing Gel and degrease skin with One-Step Prep.

6. Apply a skin-specific IonActiveTM Serum based on your client’s skin concerns (choose from Hyaluronic Acid, Niacinamide, or Oligopeptide).

7. Perform microneedling passes according to the manufacturer’s guidelines.

Dermal Layering (10 mins):

8. Follow Dermal Layering protocol but use Intensive Moisture Balance for the moisturiser step.

tips and contraindications on back

tips:• Microneedling clients with fillers? Wait 2 weeks after Botox and 4 weeks after a filler like Juvederm.

• Ensure you are holding the microneedling pen flush to the skin.

• Skin should be damp and pen should glide easily. If more slip and glide is required, add more IonActiveTM Serum.

• Choose the appropriate pen settings per your client’s skin concerns, based on your jurisdiction and within your scope of practice.

• If your client does not have the means to physically cover their skin (i.e. hat or visor), mix in a small amount of Invisible Physical Defense SPF30 with their moisturiser.

contraindications:Pregnancy, keloid or raised scarring; history of eczema, psoriasis and other chronic conditions; history of actinic (solar) keratosis; history of herpes simplex infections; history of diabetes; presence of raised moles, warts or any raised lesions on the targeted area.

Documents

double cleanse - Dermalogica