Upload
vudiep
View
219
Download
0
Embed Size (px)
Citation preview
DORMADoor Controls
The Lock Range
2
DORMA Locks.
3
6–11
12–15
Mortice locks for timber doors
Mortice locks for narrow-stile doors
DORMA LocksProduct range
4
Welcome to the safe side.
DORMA locks offercompelling benefits thanksto assured high quality andfunctional integritycombined with long servicelifetimes. With high-gradematerials, carefulmanufacturing and acomprehensive qualitymanagement system, theseproducts are able to satisfyvirtually all the technical
requirements ever likely to arise. Conforming to BS EN12209, BS EN 179 or DINstandards, DORMA locksoffer unbeatableperformance, safety andsecurity.Under Approved DocumentM and BS8300, locks arerecommended to have aminimum backset of 55mm
and centres of 72mm (thedistance from the leverhandle follower to keycentre) to ensure ease ofoperation. Both the Premierand Contract series of locksmeet these recommendations.Whichever solution you optfor, you can be sure thatabsolute reliability andengineering excellence willbe included as standard.
Nightlatch with ProjectSashlock WC sashlock Latch Nightlatch anti-thrust bolt rollerbolts Deadlock
Lock No. 151F 191F 115F 116F 117 484 132F
Features BS EN 12209 BS EN 12209 BS EN 12209 BS EN 12209 DIN 18251-1, DIN 18251-1, BS EN 12209marked marked marked marked Class 3 Class 3 marked
Bolt projection (mm) Double-throw, Single-throw, Double-throw, Double-throw, Double-throw,20 10 20 20 20
Backset D (mm) 55, 60 55, 60 55, 60 55, 60 55, 60 55, 60 55, 60
Forend widths (mm) 20 20 20 20 20 20 20
Latch and bolt position Central Central Central Central Central Central Central
Forend designs
Square ends ● ● ● ● ● ●
Radiused ● ● ● ● ● ●
Forend finishes
Satin-brushed stainless steel ● ● ● ● ● ● ●
For Europrofile cylinders ● ● ● ● ●
For bathroom/WC,bolt projection 10 mm ●
Complete withstrike plate and screws ● ● ● ● ● ● ●
Page 6 6 7 7 7 8 9
Premier seriesMortice locks for timber doors
CF267
All DORMA ‘F’ and MorticeEscape Locks are CE markedand CERTIFIRE approved for1hr on timber doors and 4hrson metal doors (intumescentpack required for 1hr timberdoors – not required for 1/2hr timber fire doors ormetal doors).
5
DORMA locks – uniquedesign features combinedwith manufacturing qualityof the highest standard
Mortice 9mm Lock withsashlock & Mortice latch Follower Emergency Emergency Lock with roller catchW.C. sashlock & deadlock lock escape lock escape lock latch and bolt and bolt Deadlock Latch
752F/790F 515F/532F 180 181 182 952.0 985.0 917.0 936.0
BS EN 12209 BS EN 12209 BS EN 12209 DIN 18250 DIN 18250 DIN 18251-2, DIN 18251-2, DIN 18251-2, DIN 18251-2,marked marked marked EN 179 EN 179 Class 3 Class 3 Class 3 Class 3
Double-throw, 20 Double-throw, Double-throw, Double-throw, Double-throw, Single-throw, Single-throw, Single-throw,Single-throw, 10* 20 22 22 22 20 20 20
55 55 55 55 55 25, 30, 35, 25, 30, 35, 25, 30, 35, 25, 30, 35,40, 45 40, 45 40, 45 40, 45
20 20 20 20 20 24 24 24 24
Central Central LH or RH LH or RH LH or RH Central Central Central Central
● ● ● ● ● ●
● ● ● ● ●
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ●
● *
● ● ● ● ●
10 10 11 11 11 12 13 14 15
*790F
Mortice locks for narrow-stile doorsMortice escape locksContract series
Premier Series – Project Locks
Mortice locks for timber doors
6
D20
7.5
24
8
12
41
10
7
38
7
235
15.2
38
35
330
8
11
3237 20
209
46
8598
165
7221
.5
7
63
17.2
10.2
33.7
X9
90º
X5.
5
90º
X8
3
151FMortice Sashlock for Europrofile cylindersNight Latch FunctionFollower-to-Keyway centres72mm
191FMortice Bathroom/WC Lock8mm turn followerFollower-to-turn follower centres 78mm
Features
– Galvanised steel lockcase, bronze bushed
– Latch bolt nickel- plated brass
– Nickel plated brassdeadbolt with anti-drillsteel rollers
– Sashlock bolt projection,double throw, 20mm
– Bathroom/WC lock bolt projection, singlethrow, 10mm
– 8 mm heavy sprungsquare follower
– Special bronze-bushed, self-adjusting clamp followerfor rattle-free lever handles
– Maintenance-free, pre-lubricated silent-pattern latch
– Through-bolt protectionsleeves for holes forstandard fixings
– Technical Specification toBS EN 12209, CE markedand CERTIFIRE approved
– Non-handed
Backsets D (mm)
55, 60
Forend widths (mm)
20
Forend designs
– Radiused– Square ends
Forend finish
– Satin-brushed stainless steel
1,5
R 0,5
R 0,5
R 1
R 1
16
5
18
19
10
9
R12
14
45
7
24
5
45
11
9
54
36
,5
82
"X"R 0,5
R 0,
5
38
R 0,5
R 0,5
9
R 40
7
Mortice locks for timber doors
Premier Series – Project Locks
D2024
12
41
10
7
38
7
15.2
330
8
11
32
209
235
46
8598
165
21.5
63
X5.
5
90º
X8
Features
– Galvanised steel case,bronze bushed
– Latch bolt nickel-platedbrass
– 8 mm heavy sprungsquare follower
– Special bronzed-bushed,self-adjusting clamp follower for rattle-freelever handles
– Maintenance-free, pre-lubricated silent-pattern latch
– Through-bolt protectionsleeves for holes forstandard fixings
– Technical Specification:115F and 116F to BS EN 12209, CEmarked and CERTIFIREapproved, 117 to DIN 18251-1 Class 3
– Non-handed
Backsets D (mm)
55, 60
Forend widths (mm)
20
Forend designs
– Radiused– Square ends (except 117)
Forend finish
– Satin-brushed stainlesssteel
115FMortice Latch
116FMortice Nightlatch for Europrofile cylindersFollower-to-Keyway centres 72mm
117Mortice Nightlatch with anti-thrust bolt for Europrofile cylindersFollower-to-Keyway centres 72mm
Premier Series – Project Locks
Mortice locks for timber doors
484Mortice Rollerbolt Lock for Europrofile cylinders
Features
– Galvanised steel lock case– Roller bolt of brass,
adjustable– Nickel-plated brass
deadbolt with anti-drillsteel rollers
– Bolt projection, double-throw, 20 mm
– Forend in centre, non-handed
– Technical Specification:DIN 18251-1
Backsets D (mm)
55, 60
Forend widths (mm)
20
Forend design
– Square ends
Forend finishes
– Satin-brushed stainlesssteel
63
13
37
72
16
5
9
6
21
,5
23
5
20
98
30
10,2
38
17,2
35
6,1
32
90
° 9
0°
D
3
10,1
33
,7
25
7
101
13
,5
8
9
D20
7.5
8
6.5
6.5
15.2
38
35
330
37 20
209
235
46
8598
165
7210
38
21.5
7
63
17.2
10.2
33.7
X9
90º
X5.
5
90º
X8
3
(24)
132FMortice Deadlock for Europrofile cylinders
Features
– Galvanised steel case– Nickel plated brass
deadbolt with anti-drillsteel rollers
– Bolt projection, double-throw, 20 mm
– Through-bolt protectionsleeves for holes forstandard fixings
– Technical Specification to BS EN 12209, CE marked andCERTIFIRE approved
– Non-handed
Backsets D (mm)
55, 60
Forend widths (mm)
20
Forend design
– Radiused– Square ends
Forend finish
– Satin-brushed stainlesssteel
Mortice locksfor timber doors
Premier Series – Project Locks
Contract SeriesMortice locks for timber doors
Features
– Galvanised steel lock case– Latch bolt nickel-plated
steel– Nickel plated steel
deadbolt with anti-drillsteel rollers
– 752F/532F lock boltprojection, double throw,20mm
– 790F lock bolt projection,single throw, 10mm
– 8 mm heavy sprungsquare steel follower indrawn steel bushes
– Maintenance-free, pre-lubricated silent-pattern latch
– Holes for standard fixings– Technical Specification
to BS EN 12209, CE marked andCERTIFIRE approved
– Non-handed
Backset (mm)
55
Forend widths (mm)
20
Forend designs
– Radiused – Square ends
Forend finish
– Satin-brushed stainlesssteel
8
15
,5–
0,5
13
13
12
8
17
46
21
,58
72
35
16
5
52
32
49
38
23
5
38
D 30
20
10
2024
752FMortice Sashlock for Europrofile cylindersNight Latch functionFollower-to-Keyway centres 72mm
515FMortice Latch
532FMortice Deadlock for Europrofile cylinders
790FMortice Bathroom/WC Lock8mm turn operated followerFollower-to-turn follower centres 78mm
1,5
R 0,5
R 0,5
R 1
R 1
16
5
18
19
10
9
R12
14
45
7
24
5
45
11
9
54
36
,5
82
"X"R 0,5
R 0,
5
38
R 0,5
R 0,5
9
R 40
1010
235
8
9
38
3
165
72
4621
.5
(6.3)
14
(6)
11
1415
.5
(4)
6385
98
37
10
209
17.2
33.7
10.2
X9
90º
X6
90º
X10
3
3.3
1
D
22
33
3235 8
12
20
(24)
10
7
45
7
38
180Mortice Sashlock for Europrofile cylinders9mm square followerNight Latch FunctionFollower-to-Keyway centres 72mm
181Mortice Escape Lock forEuroprofile cylinders9mm square followerFollower-to-Keyway centres 72mm
EN179
182Mortice Escape Panic Lock for Europrofile cylinders9mm split followerFollower-to-Keyway centres 72mm
EN179
Features
– Galvanised steel lock case– Latch and bolt of
nickel-plated steel– Bolt projection,
180 and 181 have a9mm Square follower
– 182 has a 9mm ‘Split’follower
– Specifications toDIN 18250 for fire andsmoke check doors
– Technical Specification:180 to BS EN 12209, CE marked
– 181/182 to BS EN 179,CE marked andCERTIFIRE approved
Backsets D (mm)
55
Forend widths (mm)
20
Forend designs
– Radiused– LH or RH
Forend finish
– Satin-brushed stainlesssteel
181 - Internal function
(Emergency escape side)Operation of the lever handleretracts the latch and theprojected bolt
181 - External function
Key retracts the latchboltand deadbolt
182 - Internal function
(Emergency escape side)Operation of the lever handleretracts the latch and theprojected bolt
182 - External function
Lever retracts the latchbolt,key retracts the deadbolt
Mortice locks for timber doorsMortice Escape Locks
11
Illustration shows LH/ISO6 lock(Mirror image applies for RH/ISO5 lock)
Locks with latch and bolt
Mortice locks for narrow-stile doors
D
13
15
10
X10
7.5
15.5
178
31
3644
38
245
221 8
90º X
5.4
92
8
3
20
90º
X10
55
24
46
7688
20.7
525
952.0Mortice Sashlock for Europrofile cylindersNight Latch functionFollower-to-Keyway centres 92mm
Features
– Lock case, zinc-plated– Latch and bolt
nickel- plated– Bolt projection,
single-throw, 20 mm– Bolt with anti-saw
protection– 8 mm square follower– With night latch function– Technical Specification:
DIN 18251-2 Class 3– Non-handed
Backsets D (mm)
25, 30, 35, 40, 45
Forend width (mm)
24
Forend finish
– Satin-brushed stainlesssteel
Forend design
– Square ends
Special designs
– Bolt projection 15 mm
12
13
D
15.5
17
15
6-15
48
147
168
180
178
48.5
245
92
24
8
3
90º
X10
90º
X10
X5.
4
20
3636
221
985.0Mortice Rollerbolt Lock forEuroprofile cylinders
Features
– Lock case zinc-plated– Adjustable roller catch
and bolt, nickel-plated– Bolt projection,
single-throw, 20 mm– Bolt with anti-saw
protection– Technical Specification:
DIN 18251-2– Non-handed
Backsets D (mm)
25, 30, 35, 40, 45
Forend width (mm)
24
Forend finish
– Satin-brushed stainlesssteel
Forend design
– Square ends
Mortice locks for narrow-stile doors
Locks with roller catch and bolt
14
Deadlocks Mortice locks for narrow-stile doors
14
D
8115
.5
15
48
112
105
117
8
243
90º
X10
90º
X10
X5.
4
20
36
181
157
Features
– Lock case zinc-plated– Bolt nickel-plated with
anti-saw protection– Bolt projection,
single-throw, 20 mm– Technical Specification:
DIN 18251-2– Non-handed
Backsets D (mm)
25, 30, 35, 40, 45
Forend width (mm)
24
Forend finish
– Satin-brushed stainlesssteel
Forend design
– Square ends
917.0Mortice Deadlock for Europrofile cylinders
15
D
14
15
11
154
170
128
108.
510
0.5
87.5
54.5
14
24
8
3
90º
X10
34
X5.
4
19
936.0Mortice Latch
Features
– Lock case zinc-plated– Latch nickel-plated– 8 mm square follower– Technical Specification:
DIN 18251-2– Non-handed
Backsets D (mm)
25, 30, 35, 40, 45
Forend width (mm)
24
Forend finish
– Satin-brushed stainlesssteel
Forend design
– Square ends
Mortice locks for narrow-stile doorsLatch locks
TB 0
9/1
1
DORMA UK LimitedDoor Controls DivisionWilbury WayHitchinHertfordshireSG4 0AB
Tel: 01462 477600Fax: 01462 477601E-mail: [email protected]
www.dorma-uk.co.uk
DORMA Ireland LimitedPO Box 1050MaynoothCo. Kildare
Tel: 01 295 8280Fax: 01 295 8284E-mail: [email protected]
www.dorma.ie
Door Controls
MovableWalls
Glass Fittings andAccessories
Automatics
Service