DORMA Entrance Systems™

Low EnergyOperators

DORMAAutomatics

DORMA ED700 — Smooth, Quiet Operation and Elegant Slimline Design

Barrier-free AccessED700

DORMA AutomaticsLow Energy Operators

For applications requiringbarrier-free access, theDORMA ED700 is the perfectsolution. Simple and easy toinstall, the ED700 providesmany features and functionsto make existing doors easilyaccessible.

The DORMA ED700 iscustom ordered to match the application. All commonapplications for outswingand inswing doors — eitherwith push arm or slide track arm for tight sideclearance — can be adaptedfor barrier-free access.

Extruded aluminum covers in custom lengths are avail -able to match aestheticallywith the door frame.

The ED700 may be used for door widths up to 48"(1220 mm) and a maximumweight of 200 lb (91 kg).

For best accessibility, theoperator can open the doorup to an opening angle of 110°.

FeaturesSlide track arm availablefor inswing applications.

Full length headeravailable on request.

5.5" W × 5" H ExtrudedAluminum Header (140 × 127 mm).

For inswing and outswingdoors.

Scissor-arm for inswing &outswing applications.

Finishes204-R1 clear anodized.

313-R1 dark bronzeanodized.

Special finishes available(custom anodized, paint,architectural metalcladding).

Cutting Edge Technology

DORMA AutomaticsLow Energy Operators

DORMA AutomaticsLow Energy Operators

Features & FunctionsSettings and AdjustmentsAll major adjustments areeasily accessible on thecontrol unit allowing correctsettings for varying door andpedestrian requirements.Main adjustments are asfollows:

Open speed.

Time delay (hold opentime, 1–30 seconds).

Close speed.

Open check speed.

Open force.

Options for ActivationPushbutton (momentaryactuation opens door;time-delayed closing).

Internal Push-&-Go (Slightpush of door will initiatepowered door opening).

Card Readers.

Power Assist.

Remote Controls.

3-Position Door Control SwitchOFF (easy manual operation).

ON (low energy modeoperation).

OPEN (door fully opensand remains).

Optional Accessory InterfaceMotion sensor (door opensand remains until sensorzone clears; time-delayedclosing).

Presence sensor (swingarea protection; preventsclosed door from opening/open door from closing).

Built-in lock-out functionand support for dual-stateoverhead safety sensors.

Door-Mounted Sensors(Approach/Door Open;Swing side/Door Inhibit).

Built-in Power Supply forSensors

Electrical Requirements120 VAC, 50/60 Hz, 5 A minimum.

Standards

ETL listed for US andCanada (UL325).

Full compliance with ANSIA156.19 – AmericanNational Standard for PowerAssist and Low EnergyPower Operated Doors.

Full compliance with theAmericans with DisabilitiesAct of 1990.

NFPA 252 90 minute firerating when used withrated door and hardware.

PLANSCALE: 2.4" = 1'0" (1:5)

ELEVATIONSCALE: 2.4" = 1'0" (1:5)

1-1/2"Typ

VERTICAL SECTIONSCALE: 3" = 1'0" (1:4)

5-1/2"

2-1/8"

1-31/32"

Unit Width(= Door width + 3")

Incoming 120 VAC(opposite pivot)

5-1/2"

5"

3/4"

PLANSCALE: 2.4" = 1'0" (1:5)

ELEVATIONSCALE: 2.4" = 1'0" (1:5)

1-1/2"Typ

VERTICAL SECTIONSCALE: 3" = 1'0" (1:4)

5-1/2"

1-7/8"

1-31/32"

Unit Width(= Door width + 3")

Incoming 120 VAC(opposite pivot)

5-1/2"

5"

1-3/16"

ED700Configurations

Surface Applied Outswing Scissor-Arm(Push Application)

Surface applies theoperator to the doorframe with a push armassembly attached to the top door rail.

Aesthetic solutions for swinging door applications.

Surface AppliedInswing Scissor-Arm (Pull Application) (Standard)

Surface applies theoperator to the doorframe with push armassembly attached to the top door rail.

Left HandReverse Bevel(LHR)

Left HandIN Swing(LH)

Right HandIN Swing

(RH)

As Viewed from EXTERIOR

Right HandReverse Bevel

(RHR)

Door Handing Definition

Aesthetic SolutionsDORMA AutomaticsLow Energy Operators

ED400-IGMAGNEO Sliding Entrance System

DORMA AutomaticsLow Energy Operators

DORMA ED400-IG — Concealed Automatic In-Ground Floor Closer

eht secud ortni AMRODED400-IG Automatic FloorCloser for applications that

- eriuqer ssecca teem ot deenments and simultaneously

hcus ,kool cissalc a niat niamas an arched door or an all-

- noit ulover sihT .edaçaf ssalgary new operator conceals the

eht ni stnenop moc citam otuafloor near the door threshold.

The ED400-IG functions ineither low energy or full powermode, and can be used inboth new construction andretro-fit applications. DORMApartnered with Opcon

Manufacturing Systems toconstruct a closer that directsthe energy generated by theED400 drive unit to the pivotin a rotating motion, thusallowing consistent, smoothoperation.

The install box that stores theoperator is completely weatherproof and is only 7" deep. All ED400 operator functions,such as Push & Go, PowerClose, and Lock Interface, are

- ilppa siht ni elbaliava yllufcation, which DORMA isnonetheless able to offer at avalue-conscious price.

Powered by linear magneticdrive technology (LMD), theDORMA MAGNEO is anentrance system designed forany modern interior—whetherpublic, commercial, or private.Its sleek Contur design hasminimalist clean lines thatblend seamlessly to meetdiscriminating applications.Innovative magnetictechnology ensures that theMAGNEO is safe, reliable,whisper quiet, and resistantto wear.

Ideal for both new andretrofit interior applications,the MAGNEO’s moderndesign and easy operationmake it an attractive andefficient way to update both

the function and appearanceof existing interior doorways.

The versatile MAGNEO meetsall safety requirements forlow energy applications. Itsextra sensitive operationinstantly detects anyobstruction. Activation isachieved via touchless designpush plate, radio remotecontrol, or traditional infraredmotion detectors.

DORMA MAGNEO — Sliding Entrance System

DORMA Entrance Systems™

Providing entrance systems that meet or exceed industry standards while maintaining architectural appeal.

Crane Revolving DoorsThe choice of leading architectsfor commercial and institutionalbuildings, Crane Manual,Automatic, & Security RevolvingDoors can be found in buildingsworldwide.

DORMA AutomaticsA leading innovator of automatic door systems, DORMA Automatics offersproducts for practically anyapplication: retail, health care,office buildings, airports,hospitality, and more.

DORMA Entrance Systems™

Pedestrian Flow, Safety & Security

DORMA Architectural HardwareProviding Safety & Security Around the Door

DORMA GlasElegance, Versatility & Beauty

ModernfoldSound & Space Management

DORMA Group North America

DORMA Entrance Systems924 Sherwood DriveLake Bluff, IL 60044

Toll Free: 877.367.6211Fax: 877.423.7999

Email: automatics@dorma-usa.comwww.dorma-usa.com

©2010 DORMA Group North AmericaDORMA is a registered trademark of DORMA Properties, Inc.

Printed in U.S.A.

6.10CT 2.5M USA 07000353