Dopo Double Power 7 MotherboardReplacement

This guide will show you how to successfully remove the tablet's motherboard.

Written By: mike pelosi

Dopo Double Power 7 Motherboard Replacement Draft: 2018-12-25Guide ID: 53448 -

This document was generated on 2019-10-02 08:26:46 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 8

TOOLS:iFixit Opening Tools (1)Flush Wire Cutters (1)Tweezers (1)Phillips #0 Screwdriver (1)

Dopo Double Power 7 Motherboard Replacement Draft: 2018-12-25Guide ID: 53448 -

This document was generated on 2019-10-02 08:26:46 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 8

Step 1 — Rear Panel

The rear panel is secured to thefront case and can simply be priedapart without damage.

Step 2

Carefully, wedge the plastic openingtool in-between the seam thatseparates both halves of the tablet.

Dopo Double Power 7 Motherboard Replacement Draft: 2018-12-25Guide ID: 53448 -

This document was generated on 2019-10-02 08:26:46 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 8

Step 3

Run the plastic opening tool alongthe seam looking for the clips and liftup on the rear panel.

Step 4

The rear panel should comecompletely off.

Dopo Double Power 7 Motherboard Replacement Draft: 2018-12-25Guide ID: 53448 -

This document was generated on 2019-10-02 08:26:46 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 8

Step 5 — Motherboard

Remove any static tape covering themotherboard.

Dopo Double Power 7 Motherboard Replacement Draft: 2018-12-25Guide ID: 53448 -

This document was generated on 2019-10-02 08:26:46 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 8

Step 6

Using the flat end of a spudger or tweezers, remove the three cables connected to themotherboard.

The cables can be disconnected by lifting up on the black section of the socket, as shown by thearrow.

Once the lever is lifted, pull out the cable by gently tugging on it.

Dopo Double Power 7 Motherboard Replacement Draft: 2018-12-25Guide ID: 53448 -

This document was generated on 2019-10-02 08:26:46 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 8

Step 7

Using a Phillips Head Screwdriversize 0, remove the four screwsattaching the motherboard.

Step 8

Using wire cutters, cut the red, black, and grays wires. Leave enough wire to be re-soldered back ifpossible.

The motherboard can now be removed

Dopo Double Power 7 Motherboard Replacement Draft: 2018-12-25Guide ID: 53448 -

This document was generated on 2019-10-02 08:26:46 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 8

To reassemble your device, follow these instructions in reverse order.

Dopo Double Power 7 Motherboard Replacement Draft: 2018-12-25Guide ID: 53448 -

This document was generated on 2019-10-02 08:26:46 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 8