Embed Size (px)
Citation preview
DONGGUAN FORSIGHT STAMPING TOOLING CO.,LIMITED
Head office :Hongkong Forsight Stamping Tooling Co.,Limited
Starts from here, grows with you!
Facility address: 1st floor, No.B building, #553, Lianhu Road, Qiaotou
Town, Dongguan City, Guangdong Province, 523528 P.R CHINA
Quality Certificate ISO9001-2008
Where we are?
Progressive die
Transfer die
Hand transfer ( Tandem)
Single Operation die
Checking fixture
ForsightTooling
Tool shop covers 3000m2
Max capacity 20-25 medium-sized dies per month Current employee: 90 personQuality control System: ISO 9001-2008
In 2010 May.Tony Yang, Jaosn Guan, Peter Hoo opens 13-Men small tool & die shop at Tangxia Town, Dongguan City.We purchased a used 250T Seyi press, we worked sixteen hours a day, seven days a week.
Who we are?
In 2011FST moved to the new facility at Qiaotou Town, Donguan City, By the end of 2010, the number of employees increased to 30.
In 2012FST purchased a new 800T mechanical press with a good-sized coil feeder.By the end of 2012, The number of employees increased to 50.In 2014FST purchased another used 300T Taiwan Press with a coil feeder for tryout.In 2016FST will purchase a 1000 Ton press.
Why we are different?
Quality is our life!
Strong sense of responsibility and mission
Improving the technology continuously
We build, we careIn 2012FST started to provide homeline tryout support for SNOP, a French stamping company-tier-1 of Peugeot Citroen
In 2014FST team provided the homeline tryout support for for Cosma Victor, Montezuma facilities, a tier 1 worldwide stamping company for GM.
Forever Our goal is never change,
Providing the good quality tools at a very low maintenance cost!
Jason and Peter at SNOP facility
Tony and Peter at Cosma Victor facility
Homeline support
U.S.A
China
We build, we careHomeline support
In 2015FST provided the homeline tryoutsupport at Magna Formex facility to assist GM D2UC PPAP. In 2016FST team provided the homeline tryout support at MA Group France
Mexico
Magna
We build, we care
July 2016FST team provided the homeline tryout support at MA FranceThe tier-1 supplier of Nissan Micra
Homeline support
France
What we build for?Glass chancel parts
Door edge latch comp
Door lock comp
Armrest hinge comp
Stringers ass compsSeat system compls
Exhaust system comp
Engine mount brackets
Engine cooling Sytem components
Motor casing
Exhaust system comp
Dust cover comp
Floor refine comp
Auti-collisiion beam comps
Air bag comps
Sunroof ass compos
Storage room brackets
What we can do more for you?
In 2014
FST team participate the all car locks design & development for New Mazada 8 with the help of customer.
Product design & development
The Management team.
General ManagerJason Guan
Product Department Project Management Engineering departmentSales & Client Service
Gordon NiPeter HooMirandaTony Yang
Tool Shop Machining Quality Control Team A Team BSales Client Service Detail DrawingCAE & Layout Die design
50%
15%9% 8%
18%20%
15%
62%
3%
20132013
• Ship to North America
Tier 1& 2
Tool Shop
InternalTrading Company
Tier 3
Customer Classification
• To Europe & U.K
• To Asia & •Domestic
• To other countries
Customer Distribution
Who & Where are our customers?
2012
2013
2014
•3,330,000 USD (3.33 million)
•50 Employees
•4,150,000 USD ( 4.15 million)
•65 Employees
•5,000,000 USD ( 5.0 million)
•80 Employees
What`s wordwide end users?
The annual marketing turnover
2015•5,400,000 USD ( 5.4 million)
80 Employees
Project management and Customer service
Customer
§Homeline Support §Process Approval
§ T1 Sample Approval
• 2D & 3D part prints• Tool Specificaiton• Time schedule
§ 50% Die design
§ 100% Die design
§Process Design
• Part print• Tolerance• Press capacity• simulation
§Detail drawing
§Machining• 2d machining• 3d machining• QC check
§Tool Assembly & Die Spotting & Tryout
§ OK Part Approval
§ Tool Buyoff & Approval
§ Tool Delivery
§Die design Approval
OP10 FO & FLD
Design-Simulation ability
Simuation software- Autoform
Material: CR440Y780T-DP-GI40/40
OP10 FO
THINNING
Design-Simulation ability
Material: CR440Y780T-DP-GI40/40
Die design ability-Progressive die
Strop layout & Die design in 3d
The team has extensive experiencein the design of progressive tools upon the European and North American tool standards.
Die design ability-Transfer die
3d design softwares includes U.G, Catia, Topsolid.
2d designAutocad 2010 , 2011, 2014
Die design ability-Transfer die with fingers
Material ExperienceCR440Y780T-DP-GI SPHC 500 SUS304 HCT340XD H340LAD
SPHC270 AL 160ST AL 100PS AL AC200
SPHE
GMW2M-ST-S-CR3
DC04 GMW3020M-ST-S-270B2 GMW2M-ST-S-CR3 HCT260XD-DX52DST-S-CR3-EG60G60G
GMW2M-ST-S-CR3 SPHC440 GMW2M-ST-S-CR3 DX54D
Project ExperienceCosma E2SC
GM Volt
Honda Civic
Landrover
GM D2XX
Tooling Experience with in-die clinch
The tool makers are very very familiar with the in-die clinching technology.
The buyoff will simulate under the condition of production.
Tooling Experience-TandemDie InformationRobot feed Tandem dies6 operationsPress tonnage: 1000 Ton+600 Ton
Material Information:SP781-440 BDThickness: 1.2 mm
Tooling Experience-Tandem
Die InformationCoil Fed Tandem dies 4 operations Press: 600T+400TMaterial spec: FE600DP-F ZNT/F Thickness: 1.0 mm
OP10 OP20
OP30 OP40
Tooling Experience-Casting Die
Die InformationEnd customer : Gedia Tool type: Casting Progressive Tool Tool size : 2200*800*600 mm Material: DP600 Thickness: 2.0 mm
Progressive Tool For BMW i03 Project
Die InformationTool size: 3885*1340*1090mmMaterial:HC260LAD+Z100 1.2T
Tooling Experience-Prog Die
Equipments-Machining
CNC Planner 3000×2500 mm + Small CNC 6 sets
Outsource-Maching & Tryout
Max outsource press for tryout: 1200 Ton, Bloster size 5000*2000 mm
Max outsource CNC equipments for maching: 5000*2500 mm
Form pattern outsource
Equipments-Tryout presses
Tonnage: 800Ton With digital Tonnage Monitor
Bed size:4000*1800 mmShut height: 1100 mm max
Coil feeder:Max coil allow: 1500 mm WideStock thickness:0.6-6.0mmm Max load: 10.0Ton
Equipments-Tryout presses
Tonnage: 300TonBed size:2400*1000 mmShut height: 590 mm max
Tonnage: 250TonBed size:1800*740 mm
Shut height: 530 mm max
Quality Control-ISO 9001:2008
Program CMM machineBrand: Leader
Stroke: 1000*800*700mm
Quality is our life, without quality 99.9%=0%
