Embed Size (px)
Citation preview
DOG TRAINING COLLARUser Guide
STATEMENT
SAFETY INSTRUCTIONS
REINFORCE LEARNING BEHAVIOURS
TIPS
BEFORE USING THE DOG TRAINING COLLAR
WHEN USING THE DOG TRAINING COLLAR
PACKAGE CONTENTS
SPECIFICATIONS
MAINTENANCE
KEY DEFINITION
OPERATION AND FUNTIONS
Charge the Remote Transmitter
To turn the transmitter on and off
Charge the Collar Receiver
To Turn the Receiver Collar on and off
Check the Receiver Power
PAIRING AND TESTING
How to Pairing/Test the Training System
How to Wear Receiver Collar Correctly
REFERENCE SIZE FOR DIFFERENT DOGS
FAQ
WARRANTY
FCC Compliance
CONTENTS
01
01
03
04
06
09/11
04
11
12
04
02
02
03
05
06
06
06
06
07
07
07
08
09
STATEMENTThank you for purchasing a PETDIARY product that has been tested
to meet our stringent quality standards. This product is covered with
PETDIARY product and labor warranty for 12 months from the date of
its original purchase.
Please email us with your order ID and problem or issue, we will respond within 24 hours.
This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product including adding essential oils directly into the tank and base.
This warranty does not apply to normal wear and tear or commer-cial use.In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no circumstances shall there be liability for any loss – direct, indirect or incidental – or consequen-tial damage arising out of, or in connection with the use of the product.
SAFETY INSTRUCTION
Training collars are used to train the dogs and not for punishment. Use properly with care and the collar can be a safe and effective tool to train, building communication and strengthen your bond with your best friend. Obey all safety messages that follow this instruction to avoid possible injury.
01
REINFORCE LEARNING BEHAVIOURSIf your dog knows the command but responds inconsistently or acts
slower than your requirement, a training collar can sharpen his skill.
For example, you have taught your dog to come when called, but over time he responds slower. You can communicate with him via the remote trainer, so that he immediately responds to your call
1.Set the collar to initial stimulation level and test it.2.Fit the collar on your dog's neck along with his regular collar.3.Let him roam around the training area. Then give the command and simultaneously press the stimulation button.4.The instant your dog moves toward you, stop stimulation and praise him.5.If he stops before he reaches you or turns away repeat the command and continue the stimulation. Again, stop at the instant he runs to you and reward him by praising him or feeding him a treat. Repeat this for 3 or 4 times.
Tips1. If he doesn't get it for the �rst few times, don't give up and do not increase the stimulation. Try to work on this a couple of times per day.2. During the training period never give the command if you are not able to enforceit. Your dog has to make the mental connection between the static stimulation/vibration/beep to his behavior (may take a week or more for some dogs)Altogether, both methods of stopping unwanted behavior and reinforcing learning behaviors can be applied to nearly every training scenario.
02
BEFORE USING THE DOG TRAINING COLLAR
WHEN USING THE DOG TRAINING COLLAR
1
113 °F
1
2
1. Do not expose to extreme heat or store at temperatures above 113 °F or 45 °C.2. Please always keep the training collar out of reach of children.3. Charge the remote transmitter and receiver at least 2 hours when receive the item. The collar cannot receive any signals while it is being charged.
1.Avoid leaving the collar on the dog for more than 12 hours per day.2.When possible, reposition the collar on the pet’s neck every 1 to 2 hours.3.Check the �t to prevent excessive pressure.4.Take off the receiver when your dog swimming.5.The receiver will turn off automatically after 10 seconds “beep” sound when battery is low.
CH
03
PACKAGE CONTENTS
SPECIFICATIONS
1 × Handheld Transmitter1 × Receiver1 × Nylon Collar Strap1 × Wrist Strap1 × USB Charging Cable2 × Long Contact Points
2 × Long Silicone Case2 × Short Contact Points2 × Short Silicone Case2 × Anti-abrasion Buckle1 × User Manua1 × Test Light
Model T720
1-100 LevelShock/Vibration Levels
Channels
Working Time on a Full Charge
Batteries Capacity
Remote Range
Net Weight
3
Transmitter: 180 days Receiver: 25-40 daysTransmitter: 300mA Receiver: 650mA
Up to 1100ft
Transmitter: 58g / Receiver: 45g
MAINTENANCE
1.Please examine regularly to ensure tightness of the transmitter and eliminate any external damages.2.Clean the screw caps with alcohol weekly.3.Examine your dog’s neck and carry out weekly cleanup.The battery is rechargeable. In order to maintain battery life, please charge it once a month if it is not used.
04
Vibration level ❿Contacts Points
Stimulation level ❿Power Button Indicator light
CH
❶❷
❸ ❻
❼
❽
❹
❾
❺
KEY DEFINITION
1 Power Button: Press to turn the transmitter on and off.2 Tone Button: Press the tone button and the receiver beep once. Tone level is not adjustable.3 Static Stimulation Button: Press the stimulation button and the receiver emits an static stimulation once.4 Vibration Button: Press the vibration button and the receiver emits a vibration once.5 +/- Button: Adjust levels of vibration and static stimulation from 1-100.6 Channel Button: Press to select a dog channel (dog1/dog2/dog3)7 LED Light Button8 LED Light9 Indicator Light
10 Power Button11 Contacts Points: Choose a suitable length to �t for different thickness of dog hair.
05
OPERATION AND FUNTIONS
Charge the Remote Transmitter1.Connect the charger cable to the charging port.2.Plug the charger into a standard outlet.3.The battery icon will �ash during charging and be solid when charging is completed.
power button
USB charging port
To turn the transmitter on and off1.Press power button to turn on/off the transmitter. The backlight is on/off.2.The backlight will stay for about 30 seconds, if no operation then the backlight off.
Charge the Collar Receiver1.Open the rubber cover, connect the receiver to a charger into a standard socket.2.The indicator light �ashes red slowly during charging, while the red light keeps on when fully charged.
To Turn the Receiver Collar on and off1.Turn on: Press the power button once, the receiver will make a short “beep” sound, means that the receiver is turned on.2.Turn off: Press the power button once, the receiver will make a long “beep” sound and LED light no �ash any more.
06
Check the Receiver PowerWhen the receiver is turned on, press the power button twice quickly to check the power:Receiver beeps 5 times, representing 100% (80-100%)Receiver beeps 4 times, representing 80% (60-80%)Receiver beeps 3 times, representing 60% (40-60%)Receiver beeps twice, representing 40%（20-40%）Receiver beeps once, representing 20% (1-20%)
How to Pairing1.Turn on the remote and select one of the dog channel by pressing the CH button.2.Adjust vibration or static shock level by pressing “+“ or “-“ button.3.Hold power button on the receiver for 2 seconds, when the indicator light keep �ashing for 10 seconds, press any button on the remote to pair. 4.If you have multiple receivers, simply choose a different channel and pair as per the same instructions.
PAIRING AND TESTING
Test the Training System
1.Static Stimulation Function TestStatic stimulation function can not be seen with the naked eye, please use our test light. Press the static stimulation function button, the test light will shine2.Vibration Function TestPress the vibration function button, the receiver will shake.
B BB
07
3.Tone Function TestPress the tone button, the receiver will make a sound.
1. Please keep in mind the dog channel you choose and do not change to other one, or the remote control will be invalid.2. You need to pair remote transmitter and receiver before use it on the dog. Please follow the manual for the �rst use. 3. The transmitter will fall into sleep mode after 30 seconds if no interaction. Please reactivate it by pressing any button on the remote.4. When the transmitter turned off, it will not produce any functions when press buttons except for the LED light button
1.Correct wearing position helps healthy and effective pet training. Receiver shall be placed on bottom of the pet’s neck, and the screw cap must contact the pet’s skin directly.2.If you dog has thick fur on the neck, please use longer screw caps.3.The anti-abrasion buckle could prevent skin abrasion. It is recommended to use it 2 to 3 times a week.4.The space between receiver collar and the pet’s neck shall be maintained to a �nger distance, which can’t be too loose, otherwise statice effectiveness shall be badly in�uenced.5.The extra part of the nylon strap can be trimmed, or be handled with other methods.
How to Wear Receiver Collar Correctly
08
REFERENCE SIZE FOR DIFFERENT DOGSSize Neck(In)
Chest Measurement(In)
BackLenght(In)
Type
Mini
9
7.8-8.6 9.8-11.8 17.5
Small
11
12.2
13.8
15.7
23.6
11.4-14.2
9.0-11.0
9.6-12.2
11.8-13.4
13.0-14.5
17.0-18.9
7.8-9.5
13.7-16.5
16.2-18.5
18.1-20.8
20.5-23.2
30.0-33.0
Chihuahua,YorkshireTerrierChihuahua,YorkshireTerrier,Poodle,PomeranianMaltese Dog,Shih Tzu
Miniature Schnauzer,Pekingese
Schnauzer,English Cocker Spaniel
Beagle
Husky
Medium
Large
Large
Large
Huge
Reference weight for dogsLarge Dog (Body height above 24 inch, Weight above 88 lbs)Medium Dog (Height 16-24 inch, Weight 24.2-66 Ibs)Small Dog (Height 10-16 inch, Weight 8.8-22 Ibs)Mini Dog (Height under 10 inch, Weight under 8.8 Ibs)
Q: Once my pet is trained and has been obeying my commands, is it still necessary for my pet to continue to wear the receiver collar?A: You may need to reinforce your pet's memory with the ReceiverCollar from time to time.
FAQ
09
Q: How old my pet can use Pet Training systems?A: DO NOT use on puppies younger than 6 months.
Q: Can I use Pet Training systems with more than one pet?A: Yes, you can simply add one more or two receiver collars to the system to control two or three pets, because three dog channels are available with one transmitter.
Q: How do I know when to charge transmitter and receiver?A: For transmitter: the symbol will show up on the left down side of LCD screen. For receiver collar: if you hear 10 Seconds beep sound, you have to get it charged.
Q: How long can I leave Receiver Collar on my dog?A: The Receiver Collar is not designed to be worn constantly. We recommend to wear the collar on your dog less than 12 hours out of every 24-hour period.
Q: What's the function of anti-abrasion buckle?A: Anti-abrasion buckle could prevent skin abrasion, avoids hurting dog's skin when you do not need to use static shock function, and also it could be insulated from electricity.
Q: What should I do if my pet's neck becomes red and irritated?A: Discontinue to use of the pet training collar for a few days. If the condition persists beyond 48 hours, please ask your veterinarian to check. Continue to monitor your pet's skin condition closely even if the skin become to normal.
Q: Can I attach a leash to the receiver collar?A: NO. This can result in pulling the screw caps (contact points) too tightly against your pet's neck. Use a separate collar placed above the receiver collar.
10
Q: How long should I process my training session for my pet?A: Training sessions should be kept positive and short, it is better forabout 10-15 minutes long each time
Q: What are the proper levels of Vibration and Static Stimulation for my pets?A: Try to �nd the best suitable levels of Vibration and Static Stimulation for your pet starting from the lowest level. Excessive levels of stimulation shall cause strong response from your pet.
WARRANTYThis product is covered with PETDIARY product and labor warranty for 12 months from the date of its original purchase. You will be given a warranty extension to 12 months if the product is registered on our website (www.petdiarycollar.com).Any defective part will be repaired or replaced at no charge if the appliance has not been tampered with and has been used according to these printed directions.If any problems occur, please contact PETDIARY support team ([email protected]) immediately to launch a warranty claim. Specify model number and your Amazon order number. Our Consumer Service Representative will respond within 1 business day, advise you how to correct the problem yourself, or instruct you on how to return the defective unit back to us for repair or replacement.We can only provide after sales service for products that are sold by PETDIARY or PETDIARY authorized retailers and distributors. If you have purchased your unit from a different place,please contact your seller for return and warranty issues.
11
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.-Caution: Any changes or modi�cations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance
12
Manufacturer: Shenzhen Wellturn Technology Co., Ltd.
Address: Room 6001，Block 3，Yilida Building，Nanshan Avenue, Shenzhen, Guangdong, China, 518000Email: [email protected]
www.petdiarycollar.com
T720
