holdings

manufacturing the futurewww.gapholdings.co.za

Doc. No.: Gm-016Rev.: 01-13/10/2015

B-BEELEVEL 2

Galvanized steel outer casing

1.6mm Steel inner tank

High quality Vitreous enamel coating

Auxiliary Port

50mm Insulation

Electric element

T/P Port

Hot Outlet

Cold Inlet

Anode

Eco ElectricEco ElectricEco ElectricThe Eco Electric geyser range is acost effective geyser that can be installedin a vertical or horizontal configuration forin roof applications. The Eco Electricgeyser has one additional port tofacilitate the easy conversion to Solaror Heat pump applications.

Solar Loop

Galvanized steel outer casing

1.6mm Steel inner tank

High quality Vitreous enamel coating

Solar Loop

50mm Insulation

2 Kw Electric element

T/P Port

Hot Outlet

Cold Inlet

Anode

Eco GreenEco GreenEco GreenThe Eco Green geyser is manufactured with two additional ports and as a result isideally suited for direct solar systems. TheEco Green geyser is weather resistantand has additional insulation allowing itto be installed inside or on top of the roof.

Solar Loop ports

Galvanized steel outer casing

1.6mm Steel inner tank

High quality Vitreous enamel coating

Double jacket cavity50mm Insulation

Solar Expansion port

2 Kw Electric element

T/P Port

Hot Outlet

Cold Inlet

Eco SolarEco SolarEco SolarThe Eco Solar geyser range is adouble jacketed indirect solar geyserdesigned specifically for solarapplications. The Eco Solar geysercan be installed in both Pumped andThermosiphon systems, with pumpedsolutions being a Vertical or Horizontalinstallation.

manufacturing the futurewww.gapholdings.co.za

geysers400kPa

5 YearMain Tank

2 YearT/P & Drain Cock

1 YearElectrical

DualVertical or Horizontal

Installation

Warranty

PortsMale ¾”

At GAP we believe in manufacturing for the future. All GAP geysers are designedto meet the growing demand for independence from conventional heating systems.GAP geysers are available in 100Lt. 150Lt. & 200Lt. sizes.

Doc. No.: Gm-016Rev.: 01-13/10/2015

B-BEELEVEL 2

manufacturing the futurewww.gapholdings.co.za

solarGAP has a range of solar solutions that is able to meet the growing demand for energy saving systems,ranging from domestic to large scale industrial systems, including custom designed residential housingprojects for developers. GAP solar systems are available in Direct and Indirect configurations, andinstalled either as a pumped or thermosiphon system.

Thermosiphon systemsThermosiphon systems rely on a natural process where the heatgenerated in the Solar Collector is transferred to the Geyserabove the solar collector through a thermal process.No mechanical process or electrical system isrequired. Thermosiphon systems are highlyefficient and require little to no maintenance.

Pumped or Retrofit systems

Pumped systems use a Solar Collector positioned on the roofto absorb thermal heat and rely on an electrical pump to

transfer the heated fluid into the geyser positioned outof sight inside the roof. Pumped systems are

aesthetically pleasing and in some casesthe existing geyser already installed

in the house can be converted to solar.

Direct and Indirect systems

Direct systems use the water in the geyser as the heatingfluid, as a result they are very efficient but can be susceptible tofreeze and are not recommended for areas with bad water quality.

Indirect systems rely on Glycol as the heating fluid in the system, for thistype of system a special geyser is required that is able to transfer the heatto the water in the tank. Indirect systems are freeze resistant and are ableto withstand adverse water conditions.

Doc. No.: Gm-016Rev.: 01-13/10/2015

B-BEELEVEL 2

Gap Holdings is a proudly South African electric and solar water heating geyser manufacturer.Founded in 2004, GAP Geysers has established itself as a reliable and trusted brand with more than adecade of experience in the water heating industry. In 2015, Gap Geysers was acquired by Gap Holdingsand a new management team are dedicated to increasing the value chain through a wider productoffering.

Manufacturing the FutureThe primary object of Gap Holdings is to be at the forefront of geyser innovation and new technologies.Our mission is to design, develop and manufacture products that will increase the efficiency andaffordability of water heating, thereby satisfying the demands of our growing customer base.

Keeping it localLocal manufacturing and the support of local suppliers within our value chain, is a fundamentalcornerstone of the Gap Holdings business acumen. This strategy stimulates growth within the sector,which benefits all who work within it, and South Africa as a whole.

Passionate about peopleGAP Holdings strives to ensure that all who work within its’ company structure should benefit from thecompany gaining market share. Of no less importance, is the belief that the company’s success can notonly be measured by its profit returns, but by the satisfaction level that every employee has, within thecompany structure. We endeavour to achieve this by seeing every individual as a unique and importantpart our team, regardless of company position.

holdings

Tel: +27 11 392-3059Tel: +27 11 392-3059Info@gapholdings.co.zaInfo@gapholdings.co.za

www.gapholdings.co.zawww.gapholdings.co.za

22 Quality Rd. Isando Ext. 422 Quality Rd. Isando Ext. 4Kempton Park, GautengKempton Park, Gauteng

Tel: +27 11 392-3059Info@gapholdings.co.za

www.gapholdings.co.za

22 Quality Rd. Isando Ext. 4Kempton Park, Gauteng

manufacturing the future

Company Profile:

Doc. No.: Gm-016Rev.: 01-13/10/2015

B-BEELEVEL 2