Embed Size (px)
Citation preview
The Intuitive Programming
DNC 880SSynchronized Press Brakes
DNC 880S numerical control is intended specifically for sheet metal bending.
According to the software installed, it will be used on synchronized or conventional press brakes with mechanical or hydraulic end stops.
DNC 880S is a competitively priced high performance product, all in a compact and slim design.
The Intuitive Programming
Easy Operating
• Intuitive and interactive programming with clear and visible field functions associated with color codes.
• Complete programming of parts on a single page.
• Quick setup of the machine thanks to direct access to setup parameters by means of clearly and logically designed menus and to basic functions by means of 5 object-oriented keys.
• Slightly inclined ergonomic keyboard with large keys for rapid data input.
• High level of comfort using the 10” TFT color screen.
• Main machine commands (push buttons, switches) ideally located under the keyboard.
Better Bending
• Delivered with offline 2D software, allowing preparation of production programs and feasibility check of the parts on a desktop computer in the office.
• Higher productivity due to the ability to easily and rapidly modify existing products.
• Fine-tuning of the machine's setting thanks to its extensive parameters.
• Display of error and warning messages on the console screen.
Powerful
• 2D graphic display.• Multi-simulation capability with
display of the optimal bending sequences, the tools and the position of the sheet between the tools as well as collision detection according to criteria defined by the operator: - Minimum length against the
operator. - Minimum return. - Maximum accuracy between
two defined faces. - Minimum operator
manipulation.• Windows XPe for multitasking and
file management.• EC safety-cycle management.• Easy communication.• Windows networking through
Ethernet (RJ45).• Connection to external devices
through USB port for software update and data backup.
• Remote maintenance.• Almost unlimited quantity of
programs and very high number of sequences.
• Over 20 languages available.• Convenient for retrofitting thanks
to its backward compatibility with earlier generations of compact CNCs.
Easy operating, better bending and powerful features all characterize
DNC 880S
The Intuitive Programming
ModEva 15TSynchronized Press Brakes
ModEva 15T is a sleek design numerical control, which can be adapted to simple as well as to sophisticated press-brakes, with up to 18 axes.
With its large 15" Touch Screen and single page programming, setting up the bending of a part is very easy, comfortable and requires very little time.
The software enables manufacturers to configure axes, inputs/outputs and auxiliary functions according to their needs. It also allows quick and user friendly programming of simple boxes and similar 3D parts.
ModEva 15T can manage sophisticated features such as complex bending aids, angle measurement, slave axes, etc.
Easy operating, better bending and powerful features all characterize
ModEva 15T
Easy Operating
• Its large 15" color Touch Screen makes programming more efficient and intuitive.
• Quick set-up of the machine thanks to direct access to set-up.
• Optional auxiliary panel for machine commands (push buttons, switches) ideally located under the keyboard.
Better Bending
• The numerical control comes with off-line PC 1200 software to prepare production programs and check the feasibility of parts on a desktop computer.
• Higher productivity thanks to easy and rapid modifications of existing products and fully featured correction page.
• Display of error and warning messages on the console screen.
Powerful
• Can control up to 18 axes.• Multi-simulation capability with
collision detection, definition of the tools and the position of the sheet between the tools, offering several solutions for optimal bending sequences.
• Extended simulation criteria for better sheet management such as: - Minimum length against the
operator. - Minimum return. - Maximum accuracy between
two defined faces. - Minimum operator
manipulation.• Windows XPe for multitasking and
file management.• EC safety-cycle management.• Ethernet for workshop networking.• Management of sophisticated
features such as complex bending aids, angle measurement, slave axes, etc.
The Intuitive Programming
ModEva RA PremiumSynchronized Press Brakes
ModEva RA Premium is the most powerful Numerical Control on the market for bending applications, allowing you to handle your most complicated projects directly on the press brake by means of the most sophisticated functions.
ModEva RA Premium combines a modern and streamlined design with a high performance software whose advanced features allow the operator to efficiently complete his daily tasks.
With extensive import and export capacities, put together with complete solutions calculations and state of the art 3D-scene display, ModEva RA Premium will make the capacities if your press brake appear endless.
ModEva RA Premium results of a collaboration between Cybelec and Metamation.
ModEva™, all rights reserved© Cybelec S.A. 2016 – V8.2
Cybelec S.A. • Rue des Uttins 27 • CH-1401 Yverdon-les-Bains • Switzerland [email protected] • www.cybelec.chTel. +41 24 447 02 00 • Fax +41 24 447 02 01
Easy Operating
• Intuitive touch screen interface.• Full 3D simulation.• Multiple view points while working.• Machine components can be
individually made invisible for better job examination.
• Automatic or interactive solutions for bending sequences, gauging, corner gauging, and tool mounting.
Better Bending
• 3D collision detection.• User defined table for bend
deduction.• Creating Programs:
- On-screen finger profile drawing. - 3D models can be imported from
PC-RA Premium or MetaBEND. - Direct programming.
• Tools: - Imported from PC-RA Premium or
MetaBEND. - Created using parameters. - Automatic tool station
dimensioning and positioning. - Tool mounts can be edited
interactively.
Powerful
• Rapid solution computation.• Almost unlimited quantity of
programs and sequences.• Windows XP Pro for multitasking
and file management.• Video-like bend simulation.• Importing DXF flat patterns with
folding information.• Importing 3D models (MetaBEND,
IGES).• Exporting computed flat patterns as
DXF files.• Automatic tool shape selection.• Automatic tool station
segmentation.• Delivered with major tool
manufacturers’ catalogs.
Easy operating, better bending and powerful features all characterize
ModEva RA Premium
PC-RA Premium Offline Software
• The PC RA Premium software bundled with each ModEva RA Premium numerical control provides the office operator with exactly the same programming possibilities as on ModEva RA Premium.
• Results can be transferred to ModEva RA Premium.
Options
• Importing STEP format files.• Importing SolidWorks native format
files.
HESSE+CO Maschinenfabrik GmbHIndustriezentrum NÖ-SüdStraße 4 - Objekt 8A-2351 Wiener NeudorfAUSTRIA
Tel.: +43/2236/638 70-0Fax: +43/2236/636 62
www.blechpower.comTechnische Änderungen, Irrtum und Druckfehler vorbehalten.
Gültig bis auf Widerruf.
www.hesse-maschinen.com
TÄGLICH AKTUALISIERTE LAGERLISTE UNTER www.hesse-maschinen.com
Trust in more than 65 years of experience! HESSE+CO was established in 1947 as a manufacturer of sheet metal working machines. Since 1980 we are specialized in dealing with new and second hand sheet metal processing machines and machine tools. We always have approximately 300 machines available in our 2.000 m² showroom, which is located only 20 minutes from the Vienna International Airport, waiting for your inspection.
Vertrauen Sie auf über 65 Jahre Erfahrung!
Die Firma HESSE+CO wurde 1947 als Hersteller von Blechbearbeitungsmaschinen gegründet. Seit 1980 sind wir auf den Handel mit neuen sowie gebrauchten Blechbearbeitungs- und Werkzeugmaschinen spezialisiert. Wir haben ständig etwa 300 Maschinen in unserer 2.000 m² großen Ausstellungshalle, die nur 20 Minuten vom internationalen Flughafen Wien entfernt ist.
Ihr Partner seit 1947
