The Intuitive Programming

DNC 880SSynchronized Press Brakes

DNC 880S numerical control is intended specifically for sheet metal bending.

According to the software installed, it will be used on synchronized or conventional press brakes with mechanical or hydraulic end stops.

DNC 880S is a competitively priced high performance product, all in a compact and slim design.

The Intuitive Programming

CybTouch™, all rights reserved© Cybelec S.A. 2014 – V2.0

Cybelec S.A. • Rue des Uttins 27 • CH-1401 Yverdon-les-Bains • Switzerland info@cybelec.ch • www.cybelec.chTel. +41 24 447 02 00 • Fax +41 24 447 02 01

Easy Operating

• Intuitive and interactive programming with clear and visible field functions associated with color codes.

• Complete programming of parts on a single page.

• Quick setup of the machine thanks to direct access to setup parameters by means of clearly and logically designed menus and to basic functions by means of 5 object-oriented keys.

• Slightly inclined ergonomic keyboard with large keys for rapid data input.

• High level of comfort using the 10” TFT color screen.

• Main machine commands (push buttons, switches) ideally located under the keyboard.

Better Bending

• Delivered with offline 2D software, allowing preparation of production programs and feasibility check of the parts on a desktop computer in the office.

• Higher productivity due to the ability to easily and rapidly modify existing products.

• Fine-tuning of the machine's setting thanks to its extensive parameters.

• Display of error and warning messages on the console screen.

Powerful

• 2D graphic display.• Multi-simulation capability with

display of the optimal bending sequences, the tools and the position of the sheet between the tools as well as collision detection according to criteria defined by the operator: - Minimum length against the

operator. - Minimum return. - Maximum accuracy between

two defined faces. - Minimum operator

manipulation.• Windows XPe for multitasking and

file management.• EC safety-cycle management.• Easy communication.• Windows networking through

Ethernet (RJ45).• Connection to external devices

through USB port for software update and data backup.

• Remote maintenance.• Almost unlimited quantity of

programs and very high number of sequences.

• Over 20 languages available.• Convenient for retrofitting thanks

to its backward compatibility with earlier generations of compact CNCs.

Easy operating, better bending and powerful features all characterize

DNC 880S