Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 1

CLUTCH

2-Ribbed 9 stand Boninfante clutch hats w/ 0.093 custom CNCPE sec levers 0.125 pri-2500ea 3-Complete 9 stand Boninfante pressure plates-1500ea 3-Complete 9 stand Boninfante flywheels-1500ea 3-Clutch stands (sets of 9)-900ea 1-9 stand pack loader-150 1-9 stand clutch hat cooling block-750 1-Complete DMR 9 stand clutch program - x2 hats, x3 pressure plates, x3 flywheels, x3 set of stands, pack loader and hat cooling block as described above-15000

16-New A1 5/8" x 6.700" flywheel stand studs-20ea 2-Goodson flywheel grinder wheels FGW-57 – New in box-50ea

16-New blank 0.093 secondary levers-50ea 44-Used 0.093 secondary levers-20ea 1-New 0.125 radius primary levers - full 0.375" wide (set of 6)-600 1-New 0.125 radius primary levers - lightened 0.280" wide (x5)-500

40-New 9 stand Boninfante floaters - 0.266" thick, 6/4 groove-40ea 14-New 9 stand Boninfante floaters - 0.266" thick, 3 groove-40ea 10-New 9 stand Boninfante floaters - 0.266" thick, 6 groove-40ea 2-New 9 stand Boninfante floaters - 0.266" thick, 4 groove-40ea 1-All Boninfante floaters listed above-3000

19-New 9 stand Stroppini floaters - 0.350" thick, 6 groove-40ea 20-New 9 stand Stroppini floaters - 0.285" thick, 4 groove-40ea 19-New 9 stand Stroppini floaters - 0.285" thick, 6 groove-40ea 1-All Stroppini floaters listed above-2100

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 2

20-New 8 stand SSI floaters - 0.325" thick, 4 groove-40ea 20-New 8 stand SSI floaters - 0.265" thick, 4 groove-40ea 1-All SSI floaters listed above-1400

1-Trick Titanium clutch can, 9.4”, has not been run since 2011 re-cert, great condition-3500

1-Snoozels and bearings, all items in picture-300

HEADS

6-ARP exhaust stud kit (245-1301) - new in packet-80ea 20-Felpro Stage5 exhaust gaskets (1418) - new in packet-40ea

1-New 2.450" Victory Intake valves, bead lock groove, flat top (set of 8)-960 140-2.450" Intake valves, bead lock groove, flat top-50ea ($5600 lot) 89-2.450" Intake valves, bead lock groove, dome top-50ea ($3560 lot)

1-Tripple-T pushrod checker-200

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 3

3-Morel lifters (set of 8)-600ea

20-Pushrods, 7/16-10.735 – 25ea 13-Pushrods, 7/16-10.630 – 25ea

1593-Autolite spark plugs-3ea ($3200 lot)

12.5-Titanium fuel rails, suit AJPE Stage 5, sold as pairs-150ea (1500 lot) 3-Steel fuel rails, suit AJPE Stage 5, sold as pairs-100ea

2-TAK Titanium blower restraint brackets, no pins (set of 4)-300ea

18-Inner head studs (7/16-4.2”), set of 8-50ea

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 4

2-Stage5 2-3/4” headers, pair, used-400ea

6-New steel 3/8 10deg square locks (CV596), set of 16 pairs-40ea

7-7deg triple titanium retainers, set of 16-160ea

4-7deg double retainer, suit titanium springs, set of 16-160ea

4-New 7deg double retainer, suit titanium springs, set of 16-240ea 3-7deg double retainer, suit titanium springs, set of 16-160ea

5-New 3/8 7deg locks, set of 16 pairs-40ea

Titanium valve springs, new and used, call if interested

7-AJPE rocker stand studs (7/16 x 3.6875”), set of 8-30ea

AJPE Stage 5 heads, need various repairs-mostly exhaust guides, call if interested.

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 5

SUPERCHARGERS

1-Complete 14/71 PSI TF Supercharger (inc. snout, starter mount and restraint)-7000

1-PSI setback snout (inc. coupler and shaft)-1000

124-Moulded Teflon strips - moulded, easy push in style-13.5ea

1-PSI bearing tools (71001-TL20, TL19, TL18, TL17)-400lot

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 6

RACKS

130-Buttons - suit JE piston-500 lot

18-Used Venolia pistons 1.590"-720 lot

1-Sleeve installer (hammer)-100 1-Sleeve slide hammer-150 1-Main cap puller-100

1-Rod pusher-60 1-Rod vice-100 1-Rod length checker-300

5-Piston racks-150ea

1-Digital rod + piston total height checker-600

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 7

CHASSIS

1-American racing front wheels, pair-800

1-Stange TF diff parts, pinion bearing (JW7049/JW7010), left crown bearing (JP10049/JP10010), front pinion bearing (29675), (L420410), x2 pinion seals (CR26299), x2 hub seals (CR44917), new oil pump internal gear and shaft, oil pump adaptor (L70060), x4 pinion bearing spacers-200lot

1-Strange 34 spline drive hubs, pair-900 There is an axle available as well.

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 8

SHORT MOTOR

7-Crow T/F Camshaft RC8 300-500 Grind #1452 - Fresh regrind-300ea

4-Keyway crank hubs, used-150ea 4-Keyway crank gears, used-60ea 9-3 bolt cam hubs-80ea 12-RCD timing pointers-20ea 3-Titanium mag drive clamps-100ea 2-Oil pickup hoses-150ea

30-BAE top row head stud, old style block, std steel (12.650") – new-25ea 24-BAE head studs, std steel (7.135") – new-25ea

5-System 1 oil filters (210-606), new in box-200ea

2-Triangluar idlers, inc snout and shaft-1500

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 9

2-Moroso BAE oil pan, 8in deep-400ea

1-BAE block #1480H - rods out 5/6 journal, welded, needs machining, first time windowed-3500

1-BAE block #1366L - rods out 3/4 journal, damage to cam tunnel + lifter bores-2000

1-BAE block #1356L - rods out 3/4 journal, damage to cam tunnel + lifter bores-2000

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 10

MANAGEMENT

1-Box of assorted new and used MSD plug leads and parts (approx. 4 sets worth)-1000

6-MSD coils, used, tested at rocket-400ea

1-MSD pro-crimp tool (35051)-70

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 11

TOOLS

1-Tripple T roll cage tray-800

2-Toolbox top trays-400ea

1-Wing mount clutch tray-300

1-Bottom end tool tray-100

Darren Morgan Racing Parts List 20-11-13 PH: 0408 147 606 Page 12

1-Fuel jugs, set of 5-100

1-Front wheel tow fork-100

1-Wash bay, inc tray, tank and lines-600 4-Aluminium pit tables-500ea