Embed Size (px)
Citation preview
USERMANUAL
DL9 Mirror Dash Cam
What’s in the Box?
Camera Overview
Icons Introduction
How to Power on
Setting
Specifications
Precautions
Troubleshooting
Contact US
1
1
2
2
3
12
12
12
13
CONTENTS
DL9 Mirror Dash Cam Rear Camera Rear Extension Cable
Car Charger Adapter 2 * Straps 2 * 3M Adhesive
2 * Screws Crowbar + Five Cable Clips Quick User Manual
WHAT’S IN THE BOX?
QUICKREFERENCE
GUIDEDL9 Car Dash Camera
CAMERA OVERVIEW
ICONS INTRODUCTION
LCD Touch Screen
Power ButtonBack Clasp
Speaker
Front Camera
RESETRESET
USB Power PortCard Slot Rear Camera IN
13:0101.08.2019
1:16:28 WDR
32GB Micro SD Card
Start Recording
Audio On / Off
Lock Video
Playback
Setup
Back
Up
Down
Stop Recording
HOW TO POWER ON
1
2
① Insert the car charger with cable into your car’s cigarette lighter socket.② Insert the USB end of the cable of car charger into the dash cam USB port (Charger is Input DC12-24V, Output DC 5V 3A).
Notes:① The battery takes about four hours to be charged fully. ② When the battery is charging, a icon is shown on the bottom left corner of the screen.③ The battery can last for about 10 minutes after it is charged fully. ④ The battery is mainly used to power the "parking monitor" function. For normal video recording, please connect the car charger to use the power supply. It is not recommended to use battery power, in order to avoid the battery without power and cause the parking monitoring function to fail. ⑤ To avoid damaging to the device, please do not charge the battery via the USB data cable with other adapters.
01 02
SETTINGAfter turning on the camera, click the screen and press to stop recording.
13:0101.08.2019
2:56:43 WDR
Tuesday
The time displayed in the top-left corner indicates how much time is left for the insertedcard to record. After recording some videos, the time will be reduced accordingly; whenthe time display “0:00:00”, that means the card is full. If turning on ”Loop Record”, youdon’t need to change or format the card, it still records and the newest file willautomatically overwrite the oldest file.
The icon in the middle is shown to adjust the brightness of screen.Clicking will darken, and clicking will lighten.
13:0101.08.2019
2:56:43 WDR
Tuesday
On the screen, slide from left or right by finger to right or left to switch the front and backviews; Slide up or down to adjust the angle of view of the front and back .
2. Lock / Unlock the current videoClick the recording icon to start recording, then click the unlock-icon to lock thecurrent recording video.
1. Audio: Allows the recorded videos with sound or no sound. Turn on/off for optional, default is on.Click to turn on/off the record Audio.
13:0101.08.2019
0:00:17 WDR
Lock current file
Tuesday
Click the lock-icon to unlock the current recording video.
13:0101.08.2019
0:00:17 WDR
Unlock file
Tuesday
03 04
13:0101.08.2019
2:56:43 WDR
Tuesday
FILE190119-053900-000001F
FILE190119-073330-000004F
FILE190119-071855-000003F
FILE190119-063906-000002F
13:0201.08.2019
FILE190119-074723-000006F
[ 1 / 2 ] [00 : 00 : 45]
F
R
F
R
Tuesday
F
R
F
R
This icon is for saving the unlocked videos of front camera; This icon is for saving the unlocked videos of rear camera; This icon is for saving the the emergency locked videos of front camera;This icon is for saving the the emergency locked videos of rear camera.
13:0101.08.2019
Tuesday
00:00:09 00:01:25FILE190119-053900-000001F.MOV 11/12
Back to enter video listLock / Unlock the currently playing videoClick to the previous videoClick to fast backwardClick to pause the currently playing videoClick to fast forwardClick to the next video
A video with the icon means the video is locked, do not overwrite when the card is full.
4. SetupClick to enter Recording SettingResolution: 1080P / 720P for optional, default is 1080P. Set the video resolution for recording.
1080P
720P
Parking monitor
Gravity sensor
Loop Record 13:0201.08.2019
Resolution
Tuesday
Loop Record: 1 Minute / 3 Minutes / 5 Minutes for optional, default is 3 Minutes.The files will be saved every 3 minutes if you choose 3 minutes. When the memory card isfull, the new files will cover the old one if the loop recording is on; If it is off, the camerawon’t record any more when the card is full, need to format the SD card or change a newone.
1 Minute
2 Minutes
5 Minutes
Parking monitor
Gravity sensor
13:0201.08.2019
Resolution
Loop Record
Tuesday
Gravity Sensor: Off / Low / Medium / High for optional, default is Low.Gravity Sensor means any collision will activate the camera to record, and the videos willbe locked which will never be covered by new files. The video will be stored as a file based on the time you set in the loop recording. Whendriving, if the road is bumpy, please adjust it to low or turn off it directly to prevent thecamera doesn’t work because of the memory card is full. When parking, recommend youto adjust it to medium.
Tuesday
05 06
3. Playback: Play the recorded videos on the card. File front / File rear / File front locked / File rear locked file for optional.Click to enter into Playback Interface, here you can play the recorded videos.
Off
High
Medium
LowParking monitor
13:0201.08.2019
Resolution
Loop Record
Gravity sensorTuesday
Parking Monitor: Off / On for optional, default is off.The camera will be turned on automatically and start recording, if there is a hit of the carduring parking. The video will be saved and the camera automatically shutdown after 30seconds.
Off
On 13:0201.08.2019
Resolution
Loop Record
Gravity sensor
Parking monitorTuesday
Screen Save: Off / 30seconds / 1 minute /2 minutes for optional, default is 1 minute.The screen will be turned off automatically after the time you set.After turning off, the screen will reduce power consumption, the camera still work andrecord under the display off. Just click the screen, it will turn on.
Off
30 Seconds
1 Minute
2 Minutes
13:0201.08.2019
Screen save
Boot streaming
Language settings
Date formatTuesday
Boot streaming: Off / On for optional, default is on.When the camera is turned on, the rear view screen automatically show, comprehensivemonitoring of the rear traffic conditions in the real time, without delay.
Language: Chinese / English / French / German / Japanese / Spanish / Italian for optional.Set the language of the system.
Off
On 13:0201.08.2019
Screen save
Boot streaming
Language settings
Date formatTuesday
English
13:0201.08.2019
Screen save
Boot streaming
Language settings
Date formatTuesday
Date Format: Year month day,Month day year,Day month year for optional, default is Month day year.Set the time format you prefer.
Year month day
Month day year
Day month year13:02
01.08.2019
Screen save
Boot streaming
Language settings
Date formatTuesday
07 08
Video watermark: Off / On for optional, default is off. Note: When you select on,time watermark will be displayed in the video
On
Off 13:0201.08.2019
Video watermark
Touch-tone
Volum
WDRTuesday
On
Off 13:0201.08.2019
Video watermark
Touch-tone
Volum
WDRTuesday
Touch-tone: Off / On for optional, default is on. Turn On / Off the button sound.
Volum: Off / High / Medium / Low for optional, default is Medium.Adjust the volume in the playback video.
Off
High
Medium
Low
13:0201.08.2019
Video watermark
Touch-tone
Volum
WDRTuesday
WDR (Wide Dynamic Range): Off / On for optional, default is on.Balance light and darkness in driving to get the best image automatically.
Frequency: 50Hz / 60Hz for optional, default is 60Hz.
Date / time: Set the time shown on screen of this camera.
On
Off13:02
01.08.2019
Video watermark
Touch-tone
Volum
WDRTuesday
50Hz
60Hz 13:0201.08.2019
Frequency
Date/time
Format
Default settingTuesday
13:0201.08.2019
Frequency
Date/time
Format
Default settingTuesday
2019/1/8 13:02:26
Reset
2019 / 01 / 08 / 13 : 02 : 26
OK
09 10
Format: Format the SD card.
Format the card?
All data will be deleted
Yes13:02
01.08.2019
Frequency
Date/time
Format
Default settingTuesday
Note: ① All data will be deleted. Before formatting your memory card, please remember to backup your important data on your other devices.② Every time you insert a SD card, please format it in the camera to ensure that the SD card is compatible with the camera.
Default setting: Restore factory default settings.
Version number: Check the camera’s version information.
All settings will be deleted.
Yes 13:0201.08.2019
Frequency
Date/time
Format
Default settingTuesday
DL9-BSLL-MS396363-V01
20190101 13:0201.08.2019
Version number
Tuesday
SPECIFICATIONS
PRECAUTIONS
Name
Size
Net Weight
Screen
Micro SD Card
MIC
Model
Viewing Angle
WorkingTemperature
Battery
Max VideoResolution
WDR
AKASO Mirror Dash Cam
255*70*38mm
339g
16GB-128GB(included 32GB)
Built-in
10 inch HD Touch Screen
DL9
340° (Front+Rear)
-4°F - 158°F
Support
750mAh
1080P
1. Please safekeeping, prevent the lens from scratching and dirty.2. Please pay attention to anti-fouling and moisture-proof.3. Do not exposure the machine to the sun directly, prevent the built-in battery from damage.
TROUBLESHOOTINGQ: Why the camera always say “no card inserted”?A: 1. Please ensure that the memory card is class 10 and above. 2. Format the memory card on computer firstly. When you format it on computer, please choose "FAT32(Default)" on File system, and choose "32 kilobytes" on Allocation unit size. 3. Format it in the camera.
Q: The camera don’t work any more.A: Please check whether the memory is full, if yes, please save the files and format the SD card.
Q: The image is blurry.A: The windshield will reflect the light, please adjust the camera.
11 12
Q: The camera lose power often.A: Due to different vehicle designs, please rotate the car charger to adjust it keep stable.
Q: The camera is unable to be turned on.A: Please make sure that whether the charge indicator light is on or off, if off, please re-insert the car charger and reset the camera.
Q: All buttons are not responding. A: Please reset the camera to restart.
Q: The camera doesn’t record automatically after turning on.A: Check whether the memory card is full or reformat the card, if this problem exists, please change a new card.
Q: The video has no voice.A: Please confirm whether recording mode is on, a icon is showing on the screen. If the icon is , please click to turn on the audio
Q: The camera keeps turning on and off automatically.A: Please charge the camera via USB car charger, do not charge the battery via the USB data cable with other adapters.
CONTACT USFor any inquires, issue or comments concerning our products, please send E-mail to theaddress below, and we will respond as soon as possible.E-mail: [email protected]
13 14
![[INSERT SPEAKER’S NAME] [INSERT TITLE] [INSERT DATE]](https://img.pdfslide.us/doc/110x75/56812c68550346895d90fff9/insert-speakers-name-insert-title-insert-date-5685c9ae3d2da.jpg)
