Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
DLSeriesAccessories
Bulletin 7001-63E
Contents
Current Probes 2Differential Probes 3Passive Probes & FET Probe 4Logic Probes and Accessories 5Adapters, Front Panel Protectve Covers 6DL750, DL1600, DL7400 Series Accessories 7DL750 High-Voltage MeasurementAccessories, Cables 8Carrying Cases, Probe Cases 9Instrument Carts, Printer paper 10Software 11
2
Probe power
BNC inputBNC input
Probe power
Measured signal
Power supply
701933 DC to 50MHz, 30A
Yokogawa’s 700937, 701930, 701931 and 701932 current probes make it easy to observe current waveforms onan oscilloscope. Depending on your signal’s bandwidth and maximum current, you can choose the right currentprobe for your measurement.
Bandwidth: DC to 50MHz(-3dB)Maximum peak current value: 30ArmsAmplitude accuracy
(0 to 30Arms): ±1.0% of rdg ±1mV(to 50Apeak): ±2.0% of rdg (DC,45 to 66Hz)
Weight: Approx. 230 g
701932 DC to 100MHz, 30A
Bandwidth: DC to 100 MHz(-3dB)Maximum continuous input range: 30ArmsAmplitude accuracy
(0 to 30Arms): ±1.0% of rdg ±1mV(to 50Apeak): ±2.0% of rdg (DC,45 to 66Hz)
Weight: Approx. 240 g
See the bulletin 7019-30E for detailed specifications. When using the DL to power the current probes, make sure that the total current consumption of the probes does not exceed the DL’s probe power rating. See the following web site for
details.http://www.yokogawa.com/tm/probe/
701930 DC to 10MHz, 150A
Bandwidth: DC to 10 MHz(-3dB)Maximum continuous input range: 150ArmsAmplitude accuracy
(0~150Arms): ±1.0% of rdg±1mV(~300Apeak): ±2.0% of rdg (DC,45 to 66Hz)
Weight: Approx. 500g
701931 DC to 2MHz, 500A
Bandwidth: DC to 2 MHz(-3dB)Maximum continuous input range: 500ArmsAmplitude accuracy
(0 to 500Arms): ±1.0% of rdg±5mV( to 700Apeak): ±2.0% of rdg (DC,45 to 66Hz)
Weight: Approx. 520g
• Bandwidth: DC to 2/10/50/100 MHz• Max Current: Max 30/150/500 A• Clamp Configuration Makes Current Measurements Easy• No External Amplifier Required: Connects Directly to DL Series
Instruments• Powered by the DL’s Probe Power Supply Connectors• Current Values Can Be Read Directly on DL Series Instruments• Includes Demagnetizing Switch and Zero Adjust Dial Functions
701934 Probe Power Supply
Number of power supply connectors: 4Output voltage: ±12 V±0.5 VRated output current: +12 V: 2.5 A, -12 V: 2.5 A (the total value of four outputs)Rated supply voltage: AC100 to 240 V (50/60 Hz)External dimensions: Approx. 80 (W) * 119 (H) * 200 (D) mmWeight: Approx. 1.1 kg
A power supply for current probes,FET probes, and differential probes.Supplies power for up to fourprobes, including large currentprobes.
Current Probes For High Current and Wide Bandwidth Measurements
Coming Soon
3
700924
701921
700925
701922
701920
DC to 100MHz(-3dB)
DC to 100MHz(-3dB)
DC to 15MHz(-3dB)
DC to 200MHz(-3dB)
DC to 500MHz(-3dB)
1/100,1/1000
1/10,1/100
1/10,1/100
1/10 (fixed)
1/10 (fixed)
±1400V(DC+ACpeak)
±700V(DC+ACpeak)
±500V(DC+ACpeak)
±20V(DC+ACpeak)
±12V(DC+ACpeak)
±1400V(DC+ACpeak)
±1000V(DC+ACpeak)
±1000V(DC+ACpeak)
±60V(DC+ACpeak)
±40V(DC+ACpeak)
For High voltage measurement•High voltage(+/-1400V) can be measured safely•Useful for evaluating high-frequency inverter circuits (e.g., IGBT)•High common mode input voltage
For high speed signal measurement•For high speed differential measurement such as LVDS•For measuring signals floating from ground in a high-speed digital circuit•Input capacity : 2.5pF
For High and medium voltage measuremet•Useful for high and medium voltage differential measurements•1/10, 1/100 (switchable)
For medium speed signal measurement•Foe CAN bus signak measurement•Sensor signal measurement for automobile development
For medium voltage measuremetAA batteries or B9852MJ Power cable**: sold separately
AA batteries or B9852MJ Power cable**: standard accessory
AA batteries or B9852MJ Power cable**: sold separately
Power supply cable
Power supply cable
ModelFrequency bandwidth
Attenuation Ratio
Maximum alloweddifferential voltage
Maximum input voltage Power supplies Application
700924 Max. ±1400V/ 100MHz
Yokogawa’s differential probes let you make wide-bandwidth differential measurements. Just connect the outputof the probe to the input of a single-ended digital oscilloscope. We provide you a variety of differential probes,which can be utilized for measuring the gate-to-source voltage of a switching power supply, read/write signals ofa hard disk drive, high-speed logic signals, CAN bus signals, and more.
Bandwidth: DC to 100MHz(-3dB)Input attenuation ratio:
Switch between 1/100 and 1/1000Maximum allowed differential voltage:
: ±1400V(DC+ACpeak) or 1000Vrms(1/1000)Maximum common mode input voltage
: ±1400V(DC+ACpeak) or 1000Vrms(1/100, 1/1000)
Differential Probes For High-Voltage and High-Bandwidth Measurements
701921 Max. ±700V/ 100MHz
Bandwidth: DC to 100MHz(-3dB)Input attenuation ratio: Switch between 1/10 and 1/100Maximum allowed differential voltage: ±700V(DC+ACpeak, 1/100)Maximum common mode input voltage: ±700V(DC+ACpeak) (1/10, 1/100)
700925 Max. ±500V/ 15MHz
Bandwidth: DC to 15MHz(-3dB)Input attenuation ratio: Switch between 1/10, 1/100Maximum allowed differential voltage
: ±500V(DC+ACpeak) or 350Vrms (1/100)Maximum common mode input voltage
: ±500V(DC+ACpeak) or 350Vrms(1/10, 1/100 )
701922 Max. ±20V/ 200MHz
Bandwidth: DC to 200MHz(-3dB)Input attenuation ratio: 1/10(fixed)Maximum allowed differential voltage: ±20V(DC+ACpeak)Maximum common mode input voltage: ±60V(DC+ACpeak)50 Ω output
701920 Max. ±12V/ 500MHz
Bandwidth: DC to 500MHz(-3dB)Input attenuation ratio: 1/10(fixed)Input impedance: 100KΩ /2.5pFMaximum allowed differential voltage: ±12V(DC+ACpeak)Maximum common mode input voltage: ±30V(DC+ACpeak)50 Ω output
B9852MJPower cable
The B9852MJ cable supplies power to the700924, 700925 and 701921 differentialprobes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)
70097650 Ω terminator
Used to connect an oscilloscope hav-ing a 1M-ohm input to a probe with a50-ohm output. It is required when us-ing the 701920 and 701922 probes withthe DL1600 series.
* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or9VDC"at the probe input power connector.
Differential Probe Selection Guide
The max. current consumption of all the above differential probes is ±125mA. Make sure that the total current consumption of the probes does not exceed the DL’s probe power rating. See the following web site for details. http://www.yokogawa.com/tm/probe/
4
Combination
700960
700988
701940
700929
700978
701941
700939
DC to 200MHz(- 3dB, 1/10)
DC to 400MHz(- 3dB, 1/10)
DC to 10MHz(- 3dB, 1/10)
DC to 100MHz(- 3dB)
DC to 100MHz(- 3dB)
DC to 500MHz(- 3dB)
DC to 900MHz(- 3dB)
1/1 or 1/10
1/1 or 1/10
1/1 or 1/10
1/10 (fixed)
1/100 (fixed)
1/10 (fixed)
1/10 (fixed)
600V(DC+ACpeak)
600V(DC+ACpeak)
600V(DC+ACpeak, nonisolated input )
1000V(DC+ACpeak, probe itself)
4000V(DC+ACpeak)
400Vrms
10V(DC+ACpeak)
10MΩ/14pF(1/10)
10MΩ/14pF(1/10)
10MΩ/22pF(1/10)
10MΩ/18pF
50MΩ/4pF
10MΩ/10pF
Approx. 2.5MΩ/Approx. 1.8pF
14- 30pF
15- 25pF
17- 46pF
20- 45pF
10- 30pF
10- 25pF
—
1.5m
1.5m
1.5m
1.5m
1.2m
1.2m
1.5m
Model Frequency Bandwidth Attenuation Ratio Maximum Input Voltage Input Resistance/Capacitance(*2) Compensation Range(*2) Cable Length
Yokogawa offers a variety of passive probes including: probes designed for probing small areas (PCBs, ICs, etc.),and for measuring high voltage levels. Yokogawa also offers a FET probe which has minimal input capacitance formaking accurate, measurements on fast signals.
For the DL1600 series1.5m long
Passive Probes & FET Probe
700960200MHz Passive Probe
For the DL1700E,7400 series1.5m longStandard accessories include:Ground lead, Pinchers tip, IC test tip, Groundattachment, Marker tip
700988400MHz Passive Probe
For the DL750 701255 module1.5m longStandard accessories include:Ground lead, Pinchers tip, IC test tip, Groundattachment, Marker tip
70194010:1 Passive Probe for DL750
For the DL750 isolation modules1.5m long
70092910:1 probe (Safety probe - for use withisolated input modules)
*1: The B9852HF contains the following eleven(11) kinds of accessories.(Insulation cap, IC cap, BNC adapter, Rigid tip, Spring tip (Ø: 0.80 mm), Spring tip (Ø: 0.38 mm), Ground spring, Adjustment tool, Pincher tip, Standard ground lead, Color coding rings)
*2: Input Capacitance: Capacitance at the tip of the probe Compensation Range: Compensation Range for the input capacitance of the oscilloscopeSee the following web site for details of these passive probes. http://www.yokogawa.com/tm/probe/
Attenuation ratio: 1/100(Fixed)1.2m longStandard accessories include:Probe cap, Pinchers tip, AdjustmentDriver, Ground lead
700978High voltage probe
For DL1700E,7400 series1.2m longStandard accessories: Basic Accessories setB9852HF-see below.
701941Miniature passive probe
Bandwidth: DC to 900MHz1.5m long50 Ω output
700939FET probe
A clip set designed for the 700988,700960 and 701940 probes.
B9852CRMini clip converter
B9852HFBasic accessories set for the 701941 probe
11 accessories have been included in this set(See below *1).
Passive Probe Selection Guide
5
Combination Combination
701980
701981
700986
700987
8
8
8
8
±10V
±10V
±42V (DC +AC peak)
DC input: H/L detection for 10V DC to 250 V DCAC input: H/L detection(50/60 Hz) for 80 V AC to 250V AC
1M/10pF
10k/9pF
Approx. 100k
Approx. 100k
+/-40V (DC +AC peak)
+/-40V (DC +AC peak)
+/-42V (DC +AC peak)
250Vrms(CAT1, CAT2)
±10 V at 0.1 V resolution
±10 V at 0.1 V resolution
1.4V
DC input 6 V DC 50%
AC input 50 V AC 50%
85.7mm * 64.2mm * 20mm
85.7mm * 64.2mm * 20mm
150mm * 60mm * 20mm
195mm * 117.3mm * 45mm
Model Inputs Nondestructive Input Voltage Range Input Impedance Input Voltage Range Threshold Level External Dimensions
See the following web site for details.http://www.yokogawa.com/tm/probe/
:mm
The DL7400 series lets you measure analog (4CH or 8CH) and logic(16-bit) signals simultaneously in one unit.The DL750 lets you capture up to 16 analog channels and 16-bit logic signals simultaneously.The following logicprobes are used with these instruments.
Maximum toggle frequency: 100MHzInput impedance (typical value): 1M/10 pF
Logic Probes and Accessories
701980Logic Probe for DL7400
Maximum toggle frequency: 250MHzInput impedance (typical value): 10k/9pF
701981Logic Probe for DL7400
Two Measurement leads(B9879PX and B9879KX)included.
700986Logic probe for the DL750 - non-isolated inputs
Use with measurement lead 758917 and 758922,758929 or 701954 adapter leads (below).701954 is shown on page 8.
700987Logic Probe for the DL750 - isolated inputs
Attached to the tips of logic probe (701980 or 701981)or mini-clips ( B9852CR ), the IC clips can be used toclip contiguous 0.5-mm pitch terminals. A total of 10clips are included.
B9852ESIC Clip
A set of 0.8m long red and black test leads, used incombination with a pair of optional 758922 or 758929alligator-clip adapters.
758917Measurement lead set
Rated at 300 V. Attaches to the 758917 test leads.Sold in pairs.
758922Small Alligator-clip Adapter
Rated at 300 V. Attaches to the 758917 test leads.Sold in pairs.
758929Large Alligator-clip Adapter
Logic Probe Selection Guide
6
BNC-Banana-jack (female) adapter.Use for circuits having voltage levels nogreater than 42 V.
Adapters
366921Conversion Adapter
Banana-plug (male)-BNC adapter.Use for circuits having voltage levels nogreater than 42 V.
366922Conversion Adapter
T-adapter for BNC connectors.Use for circuits having voltage levels nogreater than 42 V.
366923T-Adapter
Safety-terminal-binding-post adapter.Use for circuits having voltage levels nogreater than 42 V.
751512Conversion Adapter
Used to connect an oscilloscope hav-ing a 1M-ohm input to a probe with a50-ohm output.
70097650 Ω terminator
A BNC (jack)-RCA (plug) adapter.Use for circuits having voltage levels nogreater than 42 V.
366928Conversion Adapter
An adapter for fitting a 4mm widebanana plug to a BNC connector (male).
758924BNC Adapter
A transparent cover to protect the front panel.
Front Panel Protective Covers
B9989FAFor DL1700E/1600 Series
A transparent cover to protect the front panel.
B8023EAFor DL750
A transparent cover to protect the front panel.
B8051DPFor DL7400 Series
7
NDIS cable(5m) includedBridge resistance: 120 Ω (701955)
350 Ω (701956)
DL750 Accessories
701955·701956NDIS Bridge Heads
D-sub cable(5m) includedSupports Shunt-CalBridge resistance: 120 Ω (701957)
350 Ω (701958)
701957·701958D-sub Bridge Heads
A 1.5m long connector-to-connectoradapter cable complying with NDIS-MILC26482. Used to connect a MIL-stan-dard cable to the strain module
700940NDIS Connector Cable
An NDIS connector for direct connec-tion to astrain module.
A1002JCNDIS Connector
For recording and playing voice memos
701951Earphone microphone
For playing voice memos
701952Speaker cable
For the DC power supply model (/DC).Cigarette lighter plug type1.8m long
701970DC power cord
For the DC power supply model (/DC).Alligator clip type1.8m long
701971DC power cord
Powers instrument for approx. 2 hoursCharging time: approx. 4.5 hoursMax. Power consumption: 200VA
DL1600 Series Accessories
701680Battery Box (only works with - DC model)
For connection between DL1640 Series and 701680.Comes standard with the 701680 battery box.
B8050WPBattery box connection cable
For the DC power supply model (-DC).
A1105JCDC power supply connector
See the following web site for detailed dimensions.http://www.yokogawa.com/tm/img/Bu/701965/tm-701965_01.gif
DL7400 Series Accessories
701965Rack mount kit(for EIA rack)
For use with the Power Supply Analysis option (/G4)Output voltage: Approx. 0 to 5 VOutput current: Approx. -100 to 0 mA
701935Deskew signal source
8
Large-sized Small-sized Combination For screw terminal
These accessories enable safe high-voltage measurements when used together with DL750 isolatedinput modules. [Note: read the User’s Manual carefully before making high-voltage measurements]
Use with DL750 isolation modulesFor High-voltage measurements1.5m long
DL750 High-Voltage Measurement Accessories
700929Isolation Probe
1000Vrms-CAT2,1.8m longSafety BNC(male) to safety banana(female) use incombination with 701959, 701954, 758921, 758922or 758929
7019011:1 BNC safety adapter lead
701902:1000Vrms-CAT2(BNC-BNC), 1m701903:1000Vrms-CAT2(BNC-BNC), 2m
701902·701903Safety BNC cable
Set contains one black and one red clip.1000Vrms-CAT2It can be connected with 701901.
701959Safety Mini clip(Hook Type)
Set contains one black and one red clip.1000Vrms-CAT2
701954Alligator clip(Dolphin type)
Adapters for fitting a 4mm banana plug to a fork termi-nal. Set contains one black and one red clip.1000Vrms-CAT2
758921Fork terminal adapter
Cables
A 1m long (366924) and 2m long(366925) BNC-BNC cables.Use only for circuits having voltage lev-els no greater than 42 V.
366924·366925BNC cable
A 1m long BNC-alligator clip cable.Use only for circuits having voltagelevels no greater than 42 V.
366926BNC cable
Do not use this cable for purposes otherthan DL750/1600/1700/7400GO/NO-GO judgement.Used to connect an external device.
366973Go/No-Go Cable
A subassembly of 1.2m long test leadswith alligator-clip adapters.Use only for circuits having voltage lev-els no greater than 42 V.
366961Measurement lead
Color Pin No. Signal Name LogicYellow 2 START IN NegativeWhite 3 GO OUT NegativeGreen 4 NOGO OUT NegativeBlue 5 GND
9
Three pockets are provided for storing accessories and the user’s manual.Can store the DC power supply model and the Battery box
Carrying Cases, Probe Cases
701964Soft Carrying Case for DL1600/DL1700E series
Soft type carrying case.
700914Soft Carrying Case for DL1700E series.
Hard type carrying case.
701950Hard Carrying Case for DL1600/DL1700E series
Three pockets are provided for storing accessories and the user’s manual.
701963Soft Carrying Case for DL750
For storing accessories (probes, etc).It can be attached on the side of the DL1600 and 1700E series.
B9918EZSoft probe case for DL1600,1700E series.
For storing accessories (probes, etc).It can be attached to the DL750’s front panel protective cover.
B9946EBSoft Case for the DL750
For storing accessories (probes, etc).
B9969ETSoft case for the DL7400 series.
10
We offer compact, deluxe and all-purpose instrument cars to meet your needs.
Compact Instrument Cart500 mm (W) 560 mm (D) 705 mm (H)/A option: keyboard, mouse table/B option: comes with a 3-prong power strip
SpecificationsUpper shelf angle:Horizontal or approximately 18Outer (maximum) dimensions:500 mm (W) 560 mm (D) 705 mm (H)Upper shelf dimensions:450 mm (W) 450 mm (D) 25 mm (H)Middle/lower shelf dimensions:450 mm (W) 450 mm (D) 25 mm (H)Space between middle and upper shelves: 300 mmSpace between middle and lower shelves: 240 mm(without accessory tray)Maximum load (per shelf): 20 kgCart weight: 21 kg
Instrument Carts
701960
Deluxe Instrument Cart570 mm (W) 580 mm (D) 839 mm (H)/A option: keyboard, mouse table/B option: comes with a 3-prong power strip
SpecificationsShelf position:Adjustable to any position using screw holesOuter (maximum) dimensions:570mm (W) 580 mm (D) 839mm (H)Upper shelf dimensions: 450mm (W) 450mm (D) 35mm (H)Lower shelf dimensions:450mm (W) 450mm (D) 35mm (H)Space between upper and lower shelves:Depends on position of shelvesMaximum load (per shelf): 50 kgCart weight: 25 kg
701961
All-Purpose Instrument Cart467 mm (W) 693 mm (D) 713 mm (H)
SpecificationsOuter (maximum) dimensions:467 mm (W) 693 mm (D) 713 mm (H)Upper/lower shelf dimensions:457 mm (W) 683 mm (D)Drawer:610 mm (W) 380 mm (D)Slide-out table:380 mm (W) 440 mm (D)Casters:100 mm diameter wheels (front casters with stoppers)Maximum load (per shelf): 50 kgCart weight: 23.5 kg
701962
Printer Paper
For the DL1600, DL1700E, DL7400 seriesPaper width: 112mmPaper length: 30mOrder Q’ty: 5 (1set)
B9850NXDL Printer Paper (Except for DL750)
For the DL750Paper width: 112mmPaper length: 10mOrder Q’ty: 10 (1set)
B9988AEPrinter paper for the DL750
Cable holder
BracePowerStrip (/B option)
Handle Mouse standattachmentscrew
Keyboard tray
Mousestand
11
Current Probe
Current Probe
Current Probe
Current Probe
Power supply
701933
701930
701931
701932
701934
1
1
1
1
1
DC to 50MHz
DC to 10 MHz
DC to 2 MHz
DC to 100 MHz
Number of connectors : 4
Product Model Name Description Order
Q’ty Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Current Probes Logic Probes
Differential Probes
Adapters
Passive Probes, FET Probe
Differential Probe
Differential Probe
Differential Probe
Differential Probe
Differential Probe
Power cable
700924
700925
701920
701921
701922
B9852MJ
1
1
1
1
1
1
Passive Probe
Passive Probe
Passive Probe
10:1 probe
High voltage probe
Miniature passive probe
FET probe
Basic accessories set for the 701941 probe
Mini clip converter
700960
700988
701940
700929
700978
701941
700939
B9852HF
B9852CR
1
1
1
1
1
1
1
1
1
200MHz bandwidth, 600V
500MHz bandwidth, 600V
10MHz bandwidth, 600V
100MHz bandwidth isolation probe
100MHz bandwidth, 4000V
500MHz bandwidth, 400Vrms
900MHz bandwidth, 10V
11 accessories have been included
for 700988/700960/701940 probes
Logic Probe
Logic Probe
Logic Probe
Logic Probe
IC Clip
Measurement lead set
Small Alligator-clip Adapter
Large Alligator-clip Adapter
701980
701981
700986
700987
B9852ES
758917
758922
758929
1
1
1
1
1
1
1
1
Maximum toggle frequency : 100MHz
Maximum toggle frequency : 250MHz
For DL750 non-isolated input
For DL750 isolated inputs
For contiguous 0.5-mm pitch terminals
For 700987 Isolated logic probe
300Vrms-CAT2
1000Vrms CAT2
Conversion Adapter
Conversion Adapter
T-Adapter
Conversion Adapter
50 Ω terminator
Conversion Adapter
BNC Adapter
366921
366922
366923
751512
700976
366928
758924
1
1
1
1
1
1
1
BNC-Banana-jack (female) adapter
Banana-plug (male)-BNC adapter
T-adapter for BNC connectors
Safety terminal-binding post adapter
Feed-through type
A BNC (jack)-RCA (plug) adapter
BNC-banana jack(female) adapter
Max. ±1400V/ 100MHz
Max. ±500V/ 15MHz
Max. ±12V/ 500MHz
Max. ±700V/ 100MHz
Max. ±20V/ 200MHz
Supplies power to the DL unit
Front Panel Protective Cover
Front Panel Protective Cover
Front Panel Protective Cover
B9989FA
B8023EA
B8051DP
1
1
1
A transparent cover for the DL1700E/1600
A transparent cover for the DL750
A transparent cover for the DL7400
Front Panel Protective Covers
Product Model Name Description Order
Q’ty
Software
Waveform Viewer lets you view waveforms on yourPC, just as you view them on the DL Seriesinstrument.
700919Waveform Viewer for DL series
Wirepuller displays an image of the front panel DLSeries on your PC for monitoring waveform signals.You control the DL Series by simply using your PC’smouse and keyboard to perform actions on thedisplayed front panel.
Wirepuller (free)
The MATLAB tool kit for DL series is a plug-in forMATALAB software. The toolkit can be used to controlsupported DL series instruments using MATLAB or toacquire data from the DL series for use in MATLAB viaa communication interface (GP-IB, USB, Ethernet).
701991MATLAB tool kit
Visit the following web sites for details about this software:1. 700919 Waveform Viewer for DL series
http://www.yokogawa.com/tm/700919/
2. Wirepullerhttp://www.yokogawa.com/tm/wirepuller/
3. MATLAB tool kithttp://www.yokogawa.com/tm/701991/
Model Numbers and Suffix Codes
Soft Carrying Case
Soft Carrying Case
Hard Carrying Case
Soft Carrying Case
Soft Case
Soft Case
Soft Case
701964
700914
701950
701963
B9918EZ
B9946EB
B9969ET
1
1
1
1
1
1
1
For the DL1600/DL1700E series
For the DL1700E series
For the DL1600/DL1700E series
For the DL750
For the DL1600,1700E series
For the DL750
For the DL7400 series
Battery Box
Battery box connection cable
DC power supply connector
701680
B8050WP
A1105JC
1
1
1
For DL1600 series
For connection between DL1640 Series and 701680
For the DL1640 Series DC power supply model (-DC).
Bridge Head
Bridge Head
Bridge Head
Bridge Head
NDIS Connector Cable
NDIS Connector
Earphone microphone
Speaker cable
DC power cord
DC power cord
701955
701956
701957
701958
700940
A1002JC
701951
701952
701970
701971
1
1
1
1
1
1
1
1
1
1
NDIS cable(5m) included, 120
NDIS cable(5m) included, 350
D-sub cable(5m) included, 120
D-sub cable(5m) included, 350
NDIS-MIL conversion, 1.5m long
For the Strain module
For recording and playing voice memos
For playing voice memos
Cigarette lighter plug type
Alligator clip type
Instrument Cart
Instrument Cart
Instrument Cart
701960
/A
/B
701961
/A
/B
701962
1
1
1
Compact Instrument Cart
keyboard, mouse table
3-prong power strip
Deluxe Instrument Cart
keyboard, mouse table
3-prong power strip
All-Purpose Instrument Cart
Waveform Viewer for DL series
Wirepuller
MATLAB tool kit
700919
-
701991
1
-
1
For the DL1600, DL1700E, DL7400 series
Free Software
plug in software for the MATLAB
Printer paper
Printer paper
B9850NX
B9988AE
5(1set)
10(1set)
For the DL1600, DL1700E, DL7400
For the DL750
Rack mount kit
Deskew signal source
701965
701935
1
1
for EIA rack
For Power Supply Analysis option
Isolation Probe
1:1 BNC safety adapter lead
Safety Mini clip(Hook Type)
Alligator clip(Dolphin type)
Fork terminal adapter
Safety BNC cable
Safety BNC cable
700929
701901
701959
701954
758921
701902
701903
1
1
1
1
1
1
1
For DL750 isolation module
1000Vrms-CAT2, A1.8m long
A set of brack and red clip, 1000Vrms-CAT2
A set of brack and red clip, 1000Vrms-CAT2
A set of brack and red clip, 1000Vrms-CAT2
1000Vrms, 1m long
1000Vrms, 2m long
BNC cable
BNC cable
BNC cable
GO/NO-GO Cable
Measurement lead
366924
366925
366926
366973
366961
1
1
1
1
1
1m long
2m long
A 1m long BNC-alligator clip cable
For DL750/1600/1700/7400 GO/NO-GOjudgement.
A subassembly of 1.2m long test leads with alligator-clip adapters
Carrying Cases, Probe Cases
DL1600 Series Accessories
DL750 Accessories
Instrument Carts
Software
Printer PaperDL7400 Series Accessories
DL750 High-Voltage Measurement Accessories
Cables
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
Product Model Name Description Order
Q’ty
* Microsoft, Windows are trademarks or registered trademarks of Microsoft Corporation in the US and other countries.
* MATLAB is a registered trademark of the Math Works, Inc in the US.
ML-14E
Represented by :
YOKOGAWA CORPORATION OF AMERICA20420 Century Blvd. Germantown, Maryland 20874, U.S.A.Phone: (1)-301-916-0409, Fax: (1)-301-916-1498
YOKOGAWA EUROPE B.V.Databankweg 20, 3821 AL, Amersfoort, THE NETHERLANDSPhone: (31)-33-4641858, Fax: (31)-33-4641859
YOKOGAWA ENGINEERING ASIA PTE. LTD.5 Bedok South Road, Singapore 469270Phone: (65)-62419933, Fax: (65)-62412606
YOKOGAWA MEASURING INSTRUMENTS KOREA CORP.Phone: (82)-2-551-0660, Fax: (82)-2-551-0665
YOKOGAWA SHANGHAI TRADING CO., LTD.Phone: (86)-21-6880-8107, Fax: (86)-21-6880-4987
Subject to change without notice. [Ed : 04/b] Printed in Japan, 409(KP)All Rights Reserved, Copyright© 2004, Yokogawa Electric Corporation.
YOKOGAWA ELECTRIC CORPORATIONCommunication & Measurement Business Headquarters2-9-32 Nakacho, Musashino-shi, Tokyo, 180-8750 JapanPhone: (81)-422-52-6768, Fax: (81)-422-52-6624
E-mail: [email protected]