dka2285_water_delivery

Water Delivery Products

Rotors

Internal ReplacementAssemblies

Quantum Valves

Accessories

s s

e 20 07-2285 Page 1 Vertis QCA1300 19th Street, Suite 200East Moline, IL 61244

Cyan Magenta Yellow Black

It started with a philosophy: to bring the finest in design, manufacturing, and support together

to produce the best in rotors, valves and accessories for the golf course irrigation industry.

The result has been rotors that are stainless-steel tough, housed in tough, industrial-grade plastic

that can take the brunt of man or nature. Valves that are ultra-reliable, fully serviceable, and a sensible

cost-alternative to expensive pressure-regulated brass valves. And accessories that allow you to

jet-clean equipment, syringe a thirsty green, or apply costly wetting agents evenly and efficiently.

We at John Deere pride ourselves on producing rotors, valves and accessories that bring both

innovation and ease to your course at a reasonable price. These products are the culmination of

our commitment to be your full-service partner. Every model, feature and subsequent combination

of these products are designed with water conservation in mind. For all of your water management

needs, contact your local John Deere distributor.

John Deere rotors,valves, and accessories.A consistent pattern of quality.

Vertis QCA1300 19th Street, Suite 200East Moline, IL 61244

Cyan Magenta Yellow Black 07-2285 Page 2 07-2

3



4 70-SERIES GOLF ROTORS

Even in blustery conditions, the 70-Series Rotors offer an

excellent blend of high performance and ease. The series has

a built-in rear nozzle for improved coverage in gusty

conditions. Its unique design eliminates blow-by and the part-

circle rotor features a field-adjustable arc that matches the

spray pattern to the turf area. A stainless-steel riser resists

damage and pops up to a full three inches to clear taller grasses.

Dual-direction flushing protects internals from debris. All

internal components are serviceable from the rotor’s top. And

the interchangeable nozzles deliver superior precipitation rates

in a variety of radii and flows.

An efficient design, a rugged core.

70-Series Rotor



5






Specifications

Models:

Full-Circle:70E: Electric Valve-in-Head70C: Check Valve-in-Head70H: Hydraulic (N.O.)

Part-Circle:75E: Electric Valve-in-Head75C: Check Valve-in-Head75H: Hydraulic (N.O.)

Arc:70-Series: Full-Circle, 360º75-Series: Part-Circle,35º to 360º

Maximum Inlet Pressure:70E and 75E: 150 psi (10,3 bar)70C and 75C: 150 psi (10,3 bar)70H and 75H: 150 psi (10,3 bar)

Pressure Regulation Range:60 to 90 psi (4,1 to 6,2 bar)

Factory Pressure Settings:70E and 75E available in60, 70, 80, 90 psi

Standard Factory Setting:80 psi (5,5 bar)

Rotation Time:70-Series:360º in 150 seconds (nominally)

75-Series:180º in 75 seconds (nominally)

Inlet Threads:1¼" ACME female threaded*1½" NPT female threaded1½" BSP female threaded

*Standard Factory Threads

Check:70C and 75C Series:15' (4,6 m) elevation

Nozzle Trajectory: 25º

Dimensions:Body Height: 10.75" (27,3 cm)Top Diameter: 7.50" (19,1 cm)Pop-Up Height: 3.00" (7,6 cm)

Riser:Stainless Steel

Solenoid:24 VAC 50/60 HzInrush Amps: 0.30Holding Amps: 0.20

The full- or part-circle rotor shall be a John Deere Golf Irrigation water-lubricated gear-drive model capable of covering a _____ (units) radius at a base pressure of _____ (units) and a discharge rate of _____ (units) as specified on the drawing. The rotor shall be installed with a number _____ nozzle that shall be _____ in color for ease of identification.

The part-circle sprinkler shall have adjustable arc coverage of35º to 360º. Arc adjustment can be performed without the need for any special tools and can be performed with the rotor in place. The part-circle rotor shall rotate through a 180º arc in two minutes or less. Rotation through 360º shall be two and a half minutes or less for the full-circle rotor.

The rotor shall be serviceable from the top. The riser shall be of stainless steel and shall be self-flushing on both up and down action. The retract spring shall be of stainless steel and of sufficient force for positive retraction.

The rotor case shall be of commercial-grade plastic and shall have a top diameter of 7.50", a pop-up height of 3.00" and an overall body height of 10.75". The rotor shall have 1¼" female ACME, or 1½" female NPT or BSP threaded inlet.

The rotor shall have color-coded, interchangeable nozzles.

Optional Feature: Electric Valve-in-Head [70E or 75E]The rotor shall have a 24 VAC 50- or 60-cycle solenoid actuated normally closed control valve in the base of the case. The rotor shall have a top-serviceable manual selector that allows therotor to be operated manually, shut off, or in fully automaticcontrol mode.

Optional Feature: Check Valve-in-Head [70C or 75C]The rotor shall have an optional spring-loaded Check-O-Matic holdback device in the base of the case and shall be usedwith a pressure-regulating, in-line electrically actuated valve, or integrated electrically actuated valve and hold back 15' of elevation.

Optional Feature: Hydraulic [70H or 75H]The rotor shall have a normally open (N.O.) hydraulic controlvalve in the base of the case and an on/off selector switch allowing it to be turned off in the field for service.

Model Features



7

m)))

70-Series Performance Data

How to Specify/Order

Full-Circle Rotor Performance Data (U.S.)

#37RED

#40 BROWN

#45GREEN

#50BLACK

#57BLUE

Base Pressure

(psi)

Radius(ft)

Flow(gsm)

Radius(ft)

Flow(gsm)

Radius(ft)

Flow(gsm)

Radius(ft)

Flow(gsm)

Radius(ft)

Flow(gsm)

60 67 33.2 65 34.3 67 36.8 73 44.6 75 46.0

70 73 36.1 73 38.6 76 41.7 77 46.9 79 48.8

80 77 48.1 79 50.6 85 52.5 89 56.2 93 61.7

90 73 36.1 75 42.6 83 45.9 89 51.3 93 54.2

Full-Circle Rotor Performance Data (Metric)

#37RED

#40BROWN

#45GREEN

#50BLACK

#57BLUE

Base Pressure

(bars)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

4,1 20.4 2.1 7.5 19.8 2.2 7.8 20.4 2.3 8.4 22.2 2.8 10.1 22.8 2.9 10.5

4,8 22.4 2.3 8.2 22.2 2.4 8.8 23.1 2.6 9.5 23.4 3.0 10.7 24.0 3.1 11.1

5,5 23.4 3.0 10.9 24.0 3.2 11.5 25.8 3.3 11.9 27.1 3.5 12.8 28.3 3.9 14.0

6,2 22.2 2.3 8.2 22.8 2.7 9.7 25.2 2.9 10.4 27.1 3.2 11.6 28.3 3.4 12.3

Part-Circle Rotor Performance Data (U.S.)

#32YELLOW

#36GRAY

#41ORANGE

Base Pressure(psi)

Radius(ft)

Flow(gsm)

Radius(ft)

Flow(gsm)

Radius(ft)

Flow(gsm)

60 67 27.5 67 28.0 65 32.3

70 69 29.3 69 32.2 71 34.5

80 69 31.6 69 34.0 73 37.7

90 71 33.1 73 36.5 73 39.9

Part-Circle Rotor Performance Data (Metric)

#32YELLOW

#36GRAY

#41ORANGE

Base Pressure(bars)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

4,1 20.4 1.7 6.2 20.4 1.8 6.4 19.8 2.0 7.3

4,8 21.0 1.8 6.6 21.0 2.0 7.3 21.6 2.2 7.8

5,5 21.0 2.0 7.2 21.0 2.1 7.7 22.2 2.4 8.6

6,2 21.6 2.1 7.5 22.2 2.3 8.3 22.2 2.5 9.1

70-Series Full-Circle Golf Rotors

Model Valve Type Nozzle Base Pressure Thread Type

D70 = Full-Circle Rotor E = Electric Valve-in-Head 37 = #37-Red 60 = 60 psi A = ACME (1¼)

C = Check Valve-in-Head 40 = #40-Brown 70 = 70 psi B = BSP (1½)

H = Hydraulic Valve-in-Head 45 = #45-Green 80 = 80 psi N = NPT (1½)

50 = #50-Black 90 = 90 psi

57 = #57-Blue

Notes: (1) Base Pressure setting is ONLY used on E types [Electric Valve-in-Head]; it is omitted for C and H types.(2) Highlighted boxes indicate standard factory setting.

Examples: (a) 70-Series, Full-Circle, Electric Valve-in-Head, #50-Black Nozzle, 80 psi pressure setting, ACME connection. Final Part No. would be: D70E5080A(b) 70-Series, Part-Circle, Check Valve-in-Head, #32-Yellow Nozzle, ACME connection. Final Part No. would be: D75C32A

70-Series Part Circle Golf Rotors

Model Valve Type Nozzle Base Pressure Thread Type

D75 = Part-Circle Rotor E = Electric Valve-in-Head 32 = #32-Yellow 60 = 60 psi A = ACME (1¼)

C = Check Valve-in-Head 36 = #36-Gray 70 = 70 psi B = BSP (1½)

H = Hydraulic Valve-in-Head 41 = #41-Orange 80 = 80 psi N = NPT (1½)

90 = 90 psi

Note all data is current at the time of printing & subject to change. Please check with the manufacturer for updated values before specifying. All nozzles were tested at a Base Pressure 10 psi above Regulated Pressure.

Flexibility for whereyou need it most.




Versatility.

That describes the 50-Series, rotors that work as well

around greens and tees as they do in the rough and

fairways. They feature full-circle and adjustable patterns

for maximum flexibility. Easy arc adjustments can be

made in the field without any special tools. Three

nozzle orifices provide the ultimate in uniformity. The

stainless-steel riser resists damage and pops up to a

full four inches to clear taller grasses. The compact

cartridge design allows for quick and easy repair. And

the Quicklock™ design allows internals to be serviced

from the rotor’s top.

50-Series Rotors

9






Models:

Full-Circle:50E: Electric Valve-in-Head50C: Check Valve-in-Head50H: Hydraulic (N.O.)

Part-Circle:55E: Electric Valve-in-Head55C: Check Valve-in-Head55H: Hydraulic (N.O.)

Arc:50-Series: Full-Circle, 360º55-Series: Part-Circle,35º to 360º

Maximum Inlet Pressure:50E and 55E: 150 psi (10,3 bar)50C and 55C: 150 psi (10,3 bar)50H and 55H: 150 psi (10,3 bar)

Pressure Regulation Range:60 to 80 psi (4,1 to 5,5 bar)

Factory Pressure Settings:50E and 55E available in60, 70, 80 psi

Standard Factory Setting:70 psi (4,8 bar)

Rotation Time:50-Series:360º in 150 seconds (nominally)

55-Series:180º in 75 seconds (nominally)

Inlet Threads:1" ACME female threaded*1" NPT female threaded1" BSP female threaded

*Standard Factory Threads

Check:50C and 55C Series:15' (4,6 m) elevation


Dimensions:Body Height: 9.75" (24,7 cm)Top Diameter: 6.50" (16,5 cm)Pop-Up Height: 4.00" (10,2 cm)


Solenoid:24 VAC 50/60 HzInrush Amps: 0.30Holding Amps: 0.20

Model Features


The part-circle sprinkler shall have adjustable arc coverage of35º to 360º. Arc adjustment can be performed without theneed for any special tools and can be performed with the rotorin place. The part-circle rotor shall rotate through a 180º arc in two minutes or less. Rotation through 360º shall be two and a half minutes or less for the full circle rotor.

The rotor shall be serviceable from the top with a Quicklock™ design. The riser shall be of stainless steel and shall be self-flushing on both up and down action. The retract spring shall be of stainless steel and of sufficient force for positive retraction.

The rotor case shall be of commercial-grade plastic and shall have a top diameter of 6.50", a pop-up height of 4.00" and an overall body height of 9.75". The rotor shall have 1" female ACME, NPT or BSP threaded inlet.


Optional Feature: Electric Valve-in-Head [50E or 55E]The rotor shall have a 24 VAC 50- or 60-cycle solenoid actuated normally closed control valve in the base of the case. The rotor shall have a top-serviceable manual selector that allows therotor to be operated manually, shut off, or in fully automaticcontrol mode.

Optional Feature: Check Valve-in-Head [50C or 55C]The rotor shall have an optional spring-loaded Check-O-Matic holdback device in the base of the case and shall be used with a pressure-regulating, in-line electrically actuated valve, or integrated electrically actuated valve and hold back 15’ of elevation.

Optional Feature: Hydraulic [50H or 55H]The rotor shall have a normally open (N.O.) hydraulic control valve in the base of the case and shall be able to hold back at least15' of elevation and an on/off selector switch allowing it to be turned off in the field for service.

Specifications



11

)m)

ve

50-Series Performance Data


50-Series Golf Rotors Medium-Range

Model Type Nozzle Base Pressure Thread Type

D50 = 1" Full-Circle Rotor E = Electric Valve-in-Head 08 = #08-Black 60 = 60 psi A = ACME

D55 = 1" Part-Circle Rotor C = Check Valve-in-Head 12 = #12-Gray 70 = 70 psi B = BSP

H = Hydraulic Valve-in-Head 14 = #14-Yellow 80 = 80 psi N = NPT

16 = #16-Orange 90 = 90 psi

18 = #18-Brown

19 = #19-Red

25 = #25-Blue

28 = #28-Green

Notes: (1) Base Pressure setting is ONLY used on E types [Electric Valve-in-Head]; it is omitted for C and H types. (2) Highlighted boxes indicate standard factory setting.(3) Light green boxes indicate nozzle performance is not optimum at designated pressure.

Example: 50-Series, Full-Circle, Electric Valve-in-Head, #25-Blue Nozzle, 70 psi pressure setting, ACME thread type. Final Part No. would be: D50E2570A

Full-Circle Rotor Performance Data (U.S.)

#08BLACK

#12 GRAY

#14YELLOW

#16ORANGE

#18BROWN

#19RED

#25BLUE

#28GREEN

Base Pressure(psi)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

60 37 7.9 39 9.9 47 13.8 51 16.9 53 19.8 55 19.7 59 22.6 62 28.0

70 37 10.1 39 11.5 47 15.4 55 18.3 57 20.2 55 21.1 67 26.6 71 30.8

80 59 22.2 69 28.5 72 32.4

Full-Circle Rotor Performance Data (Metric)

Base Pressure(bars)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

4,1 11.2 0.5 1.8 11.9 0.6 2.2 14.3 0.9 3.1 15.5 1.1 3.8 16.1 1.2 4.5 16.7 1.2 4.5 17.9 1.4 5.1 18.8 1.8 6.4

4,8 11.2 0.6 2.3 11.9 0.7 2.6 14.3 1.0 3.5 16.7 1.2 4.2 17.3 1.3 4.6 16.7 1.3 4.8 20.4 1.7 6.0 21.6 1.9 7.0

5,5 18.0 1.4 5.0 21.0 1.8 6.5 21.9 2.0 7.4

Part-Circle Rotor Performance Data (U.S.)

#08BLACK

#12 GRAY

#14YELLOW

#16ORANGE

#18BROWN

#19RED

#25BLUE

#28GREEN

Base Pressure(psi)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

60 37 7.9 40 9.0 49 11.9 53 15.0 57 16.8 55 19.7 61 21.2 63 26.4

70 37 10.1 40 12.0 47 14.5 51 16.3 55 18.3 55 21.1 59 24.4 65 26.2

80 59 22.2 65 26.4 67 30.6

Part-Circle Rotor Performance Data (Metric)

Base Pressure(bars)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

Radius(m)

Flow(l/s)

Flow(m3/hr)

4,1 11.2 0.5 1.8 12.2 0.6 2.0 14.9 0.8 2.7 16.1 0.9 3.4 17.3 1.1 3.8 16.7 1.2 4.5 18.5 1.3 4.8 19.2 1.7 6.0

4,8 11.2 0.6 2.3 12.2 0.8 2.7 14.3 0.9 3.3 15.5 1.0 3.7 16.7 1.2 4.2 16.7 1.3 4.8 17.9 1.5 5.5 19.8 1.7 6.0

5,5 18.0 1.4 5.0 19.8 1.7 6.0 20.4 1.9 6.9




12 50-SERIES BLOCK ROTORS


The part-circle sprinkler shall have adjustable arc coverage of 35º to 360º. Arc adjustment can be performed without the need for any special tools and can be performed with the rotor in place. The part-circle rotor shall rotate through a 180º arc in two minutes or less. Rotation through 360º shall be two and a half minutes or less for the full circle rotor.

The rotor shall be serviceable from the top with a Quicklock™ design. The riser shall be of stainless steel and shall be self-flushing on both up and down action. The retract spring shall be of stainless steel and of sufficient force for positive retraction.

The rotor case shall be of commercial-grade plastic and shall have a top diameter of 5.75", a pop-up height of 4.00" and an overall body height of 8.75". The rotor shall have 1" female ACME, NPT or BSP threaded inlet.


The rotor shall have a check holdback feature and shall be used with an in-line electrically actuated valve, or integrated electrically actuated valve and hold back 15' of elevation.

Model Features

Wherever you need uniformity, the 50-Series Block Rotors can rise to the occasion. A stainless-steel riser

resists damage and pops up to a full four inches to clear taller grasses. Dual-direction flushing protects

internals from debris. And all internal components are serviceable from the rotor’s top. Choose from multiple

interchangeable nozzles that deliver superior precipitation rates in a variety of radii from 37 ft. to 72 ft. and

flows from 7.9 to 32.4 gpm.



13

Models:Full-Circle:50B: Block Rotor

Part-Circle:55B: Block Rotor

Arc:50B-Series: Full-Circle, 360º55B-Series: Part-Circle, 35º to 360º

Maximum Inlet Pressure:50B and 55B: 150 psi (10,3 bar)

Rotation Time:50B-Series:360º in 150 seconds (nominally)

55B-Series:180º in 75 seconds (nominally)

Inlet Threads:1" ACME female threaded1" NPT female threaded1" BSP female threaded

Standard Factory Threads:1" ACME female threaded

Check:Checks water up to15' of elevationchange



Specifications


A spray pattern to match any turf, anywhere on the course.

50-Series Block Rotors

Model Nozzle Thread Type

D50B = 1" Full-Circle Block Rotor 08 = #08-Black A = ACME

D55B = 1" Part-Circle Block Rotor 12 = #12-Gray B = BSP

14 = #14-Yellow N = NPT

16 = #16-Orange

18 = #18-Brown

19 = #19-Red

25 = #25-Blue

28 = #28-Green

Notes: Highlighted boxes indicate standard factory setting.Example: 50-Series Full-Circle Block Rotor, #25-Blue Nozzle, ACME thread type.

Final Part No. would be: D50B25A

14 X-SERIES GOLF ROTORS

Sometimes, what’s in front of you is not the same as what’s behind you. Say for instance, the green is in front

and a bunker is in back. It’s the perfect situation for our X-Series Golf Rotors. The revolutionary X™ Technology

offers dual adjustable patterns from front and back nozzles of the same sprinkler head. It’s like getting two rotors

in one body.

Each nozzle achieves a similar radius at different flow rates, giving you precise irrigation at the transitional areas

of your golf course. No other rotor can match the X-Series in irrigation of greens and aprons and at fairway

edges for supplemental watering of roughs.

Water where you need it, less where you don’t. It’s truly water conservation at its finest.

Unique situations call for a unique rotor.

• Electric Valve-In-Head, HydraulicValve-In-Head, Check Valve-in-Head.

• 1” X-Series rotor features a full four-inchpop-up clearing tall turfgrass for even coverage.1½” X-Series rotor features a full three-inch pop-up.

• Rolled-over fl ange head keeps turfgrassclear of riser and nozzle.

• Stainless-steel riser resists damage.

• Special design eliminates blow-by andreduces pressure loss to improvesystem performance.

• Dual-direction fl ushing protects internalsfrom debris and ensures positive pop-up/down.

• Full-circle and adjustable patterns for maximumfl exibility (two back-to-back part-circle rotors in one case).

• Easy arc adjustment in the fi eld without any tools.

• Unique manual On/Off control for hydraulic rotors.

• Heavy-duty spring assures positive retraction.

• Radius can be adjusted up to 25 percent forbest coverage.

• Comprehensive 3-year warranty.

• Dual-radius part-circle operation.

• AUTO/OFF/ON selector on the electric VIH models.

• D75X uses the same case as the 70-Series but with a different internal drive. The drives are available separately and are retrofi table to all existing 70-Series.

• D55X uses the same case as the 50-Series but with a different internal drive. The drives are available separately and are retrofi table to all existing 50-Series.

Off Green: 70-ft. radius, 35 GPM

On Green: 60-ft. radius, 18 GPM



Model Features

1 Head - 2 Flow Rates

FAIRWAY—ROUGH GREEN—MOUNDS BUNKER

On Fairway On Rough On Green On Mounds On Green On Bunker

35 GPM70-ft. radius

16 GPM55-ft. radius

14 GPM55-ft. radius

24 GPM65-ft. radius

24 GPM65-ft. radius

8 GPM35-ft. radius

15

Pop-up Height:55X - 4"; 75X - 3"

Radius:15'–70'

Flow Rate:30.5 GPM–53 GPM

Inlet (bottom):Standard 1¼" ACME on 75Xand 1" ACME on 55X

Check:Checks water up to 15' ofelevation change

Pressure Regulation & Range:Standard at 80 psi 75X and70 psi 55X

Operating Pressure Range:60–90 psi

Maximum Pressure:150 psi

Body Height:10.75" 75X and 9.75" 55X

Top Diameter:7.5" 75X and 6.5" 55X

Adjustable Arc:35–360 degrees(Part-Circle models)



Specifications


Notes: (1) Base Pressure setting is ONLY used on E types [Electric Valve-in-Head]; it is omitted for C and H types. (2) Highlighted boxes indicate standard factory setting.Example: X-Series Rotor, Check Valve-in-Head, #25-Blue Nozzle (Front), #12-Gray Nozzle (Rear), ACME thread type. Final Part No. would be: D55XC2512A

1” Golf Rotors Dual-Nozzle, Dual-Part Circle

Model TypeNozzle Configuration Base Pressure

[E-Models Only]Thread Type

Front Rear

D55X = 1" X-Series Rotor E = Electric Valve-in-Head 25 = #25-Blue 08 = #08-Black 60 = 60 psi A = ACME

C = Check Valve-in-Head 12 = #12-Gray 70 = 70 psi B = BSP

H = Hydraulic Valve-in-Head 14 = #14-Yellow 80 = 80 psi N = NPT

90 = 90 psi

1½” Golf Rotors Dual-Nozzle, Dual-Part Circle

Model TypeNozzle Configuration Base Pressure

[E-Models Only]Thread Type

Front Rear

D75X = 1½" X-Series Rotor E = Electric Valve-in-Head 35 = #35-Yellow 14 = #14-Yellow 60 = 60 psi A = ACME

C = Check Valve-in-Head 16 = #16-Orange 70 = 70 psi B = BSP

H = Hydraulic Valve-in-Head 18 = #18-Brown 80 = 80 psi N = NPT

90 = 90 psi

1½” Rotor Performance Data

Front Nozzle (180˚) Rear Nozzle (180˚) TotalGPMNozzle Radius (ft) GPM Nozzle Radius (ft) GPM

#35YELLOW

70 35#14

YELLOW50 14 49

70 35#16

ORANGE55 16 51

70 35#18

BROWN60 18 53

X-Series Performance Data

1” Rotor Performance Data

Front Nozzle (180˚) Rear Nozzle (180˚) TotalGPMNozzle Radius (ft) GPM Nozzle Radius (ft) GPM

#25BLUE

60 24#08

BLACK35 8 32

60 24#12 RED

45 12 36

60 24#14

YELLOW55 14 38




16 QUANTUM VALVES

Hydraulic Pressure-Regulated ValvesD150H 1-1/2" NPTD200H 2" NPT

Electric Pressure Regulated ValvesD100E 1" NPTD150E 1-1/2" NPTD200E 2" NPT

Electric Dirty Water ValvesD150E3 1-1/2" NPTD200E3 2" NPT

Factory Pressure Settings:Available in 35, 50, 65 and 80 psi

Standard Factory Settings:80 psi (5,5 bar)

Solenoid24 VAC 50/60 HzInrush Amps: 0.30Holding Amps: 0.20

Solenoid24 VAC 50/60 HzInrush Amps: 0.30Holding Amps: 0.20

Model Features

High Performance• Low pressure loss• Unique snap ring serviceability• 200 PSI pressure rating• Common solenoid with valve-in-head (E-models)• Male pipe threads for strength and high-pressure rating


D100, D150 and D200 Quantum Valves

Style/Size TypePressure

Regulation[Electric Models Only]

D100 = 1" E = Pressure-Regulated Electric 35 = 35 psi

D150 = 1-1/2" E3 = Electric Dirty Water 50 = 50 psi

D200 = 2" H = Hydraulic 65 = 65 psi

80 = 80 psi

Example: To order 1-1/2” Electric Pressure-Regulated valve set at 60 PSI, you would specify D150E60.

Performance Data

Quantum Series Valve Pressure Loss

PSI Loss

Flow Rate (GPM)

30 40 50 70 90 100 120 150 180

1-1/2" 1.5 1.5 1.5 1.5 3.5 4.0 5.0 5.5 8.0

2" 1.5 1.5 1.5 3.5 4.5 5.5 6.0 9.0 —

PSI Loss

Flow Rate (GPM)

5 10 20 30 40

1" 2.0 2.5 3.5 5.0 8.5



17

Performance Data

INTERNAL REPLACEMENT ASSEMBLIES

Replacements for Toro®:1" Inlet Bodies

DI6734T Full-circle, DI6735T Part-circle, DI865T Part-circle Radius: 52'–75' Flow rate: 11.0–35.5 GPM Replacement Upgrades for: Toro® 630, 660, 730, 760 and 830, 860

1-1/2" Inlet Bodies

DI674754T Full-circle Radius: 66'–100' Flow rate: 25.1–66.0 GPM Replacement Upgrade for: Toro® 650, 670, 680, 750, 780

DI6785T Part-circle Radius: 56'–82' Flow rate: 13.0–35.3 GPM Replacement Upgrade for: Toro® 650, 680, 750, 780

DI694T Full-circle Radius: 91'–100' Flow rate: 57.0–66.0 GPM Replacement Upgrade for: Toro® 690

Replacements for Rain Bird®: 1-1/4" Inlet Bodies DI700R Full-circle, DI750R Part-circle Radius: 53'–72' Flow rate: 12.5–33.0 GPM Replacement Upgrades for: Rain Bird® Eagle 700, Eagle 750

1-1/2" Inlet Bodies DI51R Full-circle, DI47R Part-circle Radius: 53'–72' Flow rate: 12.5–33.0 GPM Replacement Upgrades for: Rain Bird® 47D, 51D

DI6785T Performance Data

#16 ORANGE

#21BROWN

#26BLUE

#29RED

#32GRAY

Base Pressure

(psi)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

50 56 13.0 61 16.4 62 21.8 65 22.4 66 25.8

60 57 14.2 62 18.0 64 23.4 70 25.1 71 26.9

70 58 15.4 64 19.4 66 24.8 72 27.0 75 29.7

80 59 16.4 65 20.7 67 26.0 75 28.8 78 31.7

90 60 17.5 68 21.9 70 28.1 77 30.6 80 33.5

100 61 18.6 70 23.1 70 28.1 79 32.1 82 35.3

TORO® Nozzle Reference

650 54 55 56 57 58

780 83 84 85 — 86

DI6734T, DI6735T & DI865T Performance Data

#14YELLOW

#16 ORANGE

#18BROWN

#25BLUE

#28GREEN

Base Pressure

(psi)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

50 52 11.0 55 13.3 60 16.8 62 21.8 66 25.0

60 54 13.0 57 14.9 62 17.5 64 23.4 68 26.6

70 56 14.5 59 16.3 63 18.6 66 24.8 70 28.1

80 58 15.5 60 17.5 65 20.0 67 26.0 71 29.5

90 59 16.3 61 18.1 67 21.9 70 28.1 73 32.5

100 59 16.3 61 18.1 67 21.9 70 28.1 73 32.5


630 31 32 33 34 —

660 — 62 63 — 64

730 31 32 33 34 35

760 62 63 64 65 66

DI700R/DI750R & DI51R/DI47R Performance Data

#14 ORANGE

#16BROWN

#18BLUE

#20RED

Base Pressure

(psi)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

50 52 12.5 55 17.0 60 22.0 64 24.5

60 55 13.5 58 18.5 62 23.5 66 26.0

70 57 15.0 60 20.0 65 25.0 67 27.5

80 61 17.0 62 22.0 66 26.0 68 29.0

90 61 18.0 62 23.5 67 27.0 70 31.5

100 61 19.0 62 24.0 67 28.5 70 33.0

Rain Bird® Nozzle Reference

47D 18 16 18 20

51D — 16 18 20

DI6754T & DI694T Performance Data

#29YELLOW

#32 GRAY

#37RED

#40BROWN

#45GREEN

#50BLACK

#57BLUE

Base Pressure

(psi)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

50 — — — — — — — — — — — — — —

60 66 25.1 68 26.9 74 34.0 78 38.0 80 41.5 — — — —

70 69 27.0 71 29.7 75 35.5 79 39.0 82 43.0 85 47.5 85 55.0

80 72 28.8 74 31.7 76 37.0 80 40.0 84 45.0 87 50.0 87 57.0

90 74 30.6 76 33.5 78 38.5 82 41.5 86 47.0 89 53.0 90 58.5

100 76 32.1 78 35.3 78 40.0 84 43.0 87 49.0 91 57.0 100 66.0


650 56 57 58 59 — — —

670 — — — 70 71 72 73, 74

680 — 84 85 86 87 88 —

750 54 55 56 — 57 58 —

780 84 85 86 87 88 89 —

DI5070 & DI3575 Performance Data

#06BLANK

#08 BLACK

#14YELLOW

#16ORANGE

#16BROWN

#25BLUE

#28GREEN

Base Pressure

(psi)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

Radius(ft)

Flow(gpm)

50 21 4.9 30 6.8 53 11.0 56 13.1 61 16.5 63 21.8 65 24.5

60 34 5.4 32 7.6 55 12.9 58 14.8 62 17.6 64 23.4 67 26.5

70 39 6.3 34 8.4 57 14.5 60 16.2 63 18.7 65 24.8 69 28.1

80 — — — — — 14.5 — 16.2 — 18.7 68 26.0 74 30.5

90 — — — — — — — — — — — — — —

100 — — — — — — — — — — — — — —

Rain Bird® Nozzle Reference

700 — — 14 16 18 20 —

750 — — 14 16 18 20 —

Notes: (1) Highlighted boxes indicate standard factory setting. (2) Light green boxes indicate nozzle performance is not optimum at designated pressure.


18 HOSE END ACCESSORIES



Valve-In-Head Adapters & Hose Economical 360° swivel action hose adapter for John Deere, TORO, Rain Bird, and Hunter sprinklers. 3/4" and 1" hose outlet. Includes brass 3/4"x1" adapter (Part # D1158)

Hose AdaptersD1125 Hose adapter, 1"D1126 Hose adapter, 1½"

Hose SwivelsD075HS Hose swivel 3/4"D100HS Hose swivel 1"

HoseHead™ All-In-One Hose Adapters & Swivels

Valve-In-Head Hose Adapter & Swivel - John Deere

D50HA Hose adapter and swivel for 50-Series D70HA Hose adapter and swivel for 70-Series

Valve-In-Head Hose Adapter & Swivel - Competitve Replacement

D075HA Hose adapter, 3/4" × 1" inlet D100HA Hose adapter, 1" × 1" inlet, Deere and Toro D150HA Hose adapter, 1" × 1-1/2" inlet, Deere and Toro D70HHA Hose adapter, 1" Hunter G6/70 D90HHA Hose adapter, 1" Hunter G90 D700RHA Hose adapter, 1" Eagle 700 D800HHA Hose adapter, Hunter G800 D900RHA Hose adapter, 1" Eagle 900

CoolShot™ & CoolShot™ Plus withRegulator Shower Nozzles The new CoolShot’s improved shower patternis now unbeatable for cooling and soakingyour greens. CoolShot Plus with regulatorincludes ON/OFF and fl ow control.

CoolShot

DN075CS CoolShot 3/4" hose thread DN075CSL CoolShot 3/4" hose thread, purple*DN100CS CoolShot 1" hose thread DN100CSL CoolShot 1" hose thread, purple*

CoolShot Plus

DN075CSP CoolShot Plus 3/4" hose threadDN075CSL CoolShot Plus 3/4" hose thread, purple*DN100CSP CoolShot Plus 1" hose threadDN100CSL CoolShot Plus 1" hose thread, purple*

CoolShot™ Plus withRegulator Economy Shower Nozzle Not as sexy as its aircraft aluminum brother,but this Economy version of the CoolShot Pluswith regulator offers the same great showerpattern and features, high-strength compositeconstruction and a nice lower price.

CoolShot Plus Economy

DN075CSPE CoolShot Plus Economy 3/4’’ hose threadDN100CSPE CoolShot Plus Economy 1’’ hose thread

HotShot™ withRegulator Multi-Pattern Nozzle If you could only have one nozzle, this wouldbe it. This heavy-duty HotShot sprays hot spots,jet cleans equipment, and soaks greens.

HotShot

DN075HSM HotShot 3/4’’ hose threadDN075HSML HotShot 3/4’’ hose thread, purple*DN100HSM HotShot 1’’ hose threadDN100HSML HotShot 1’’ hose thread, purple*

Wetting Agent ApplicatorApply your costly wetting agents evenly and effi ciently. On/off, variable fl ow control unit connects easily to the beginning or end of your hose. Two-tablet (2.5" dia. x 3" length max) capacity yields 2-acre coverage.

Wetting Agent Applicators

D075APL Wetting agent applicator, 3/4" hose inlet—3/4" outletD100APL Wetting agent applicator, 1" hose inlet—3/4" outlet

Wetting Agent Applicators with CoolShot Nozzles

D075APLCS Wetting agent applicator, 3/4" hose inlet—3/4" outlet w/ CoolShot

DN100APLCS Wetting agent applicator, 1" hose inlet—3/4" outlet w/ CoolShot

*Recycled Water I.D. Option CoolShot, HotShot, CoolShot Plus, nozzles also available in “non-potable” purple.

FanShot™ Spray NozzlesSlotted fan spray nozzles designed for various fl ows both with and without regulators.

FanShot NozzlesDN075FS10 FanShot 10 GPM, 3/4" hose threadDN075FS20 FanShot 20 GPM, 3/4" hose threadDN075FS30 FanShot 30 GPM, 3/4" hose threadDN100FS10 FanShot 10 GPM, 1" hose threadDN100FS20 FanShot 20 GPM, 1" hose threadDN100FS30 FanShot 30 GPM, 1" hose thread

FanShot Plus with NozzlesDN075FSP10 FanShot Plus 10 GPM, 3/4" hose threadDN075FSP20 FanShot Plus 20 GPM, 3/4" hose threadDN075FSP30 FanShot Plus 30 GPM, 3/4" hose threadDN100FSP10 FanShot Plus 10 GPM, 1" hose threadDN100FSP20 FanShot Plus 20 GPM, 1" hose threadDN100FSP30 FanShot Plus 30 GPM, 1" hose thread

FanShot Plus with 3 Nozzle CombosDN075FSP FanShot Plus w/ 3 nozzle combos, 3/4" hose threadDN100FSP FanShot Plus w/ 3 nozzle combos, 1" hose thread

19ROTOR INSTALLATION



y. e

t

dd

Block

Hydraulic

Electric

Check-O-Matic

DKA2285(07-09) Litho in U.S.A.

This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include finance, credit, insurance, product options and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS. John Deere reserves the right to change specification, design and price of products described in this literature without notice. John Deere’s green and yellow color scheme, the leaping deer symbol, and JOHN DEERE are trademarks of Deere & Company.

www.JohnDeere.com



Documents

dka2285_water_delivery