Radius DividerManual

Index

p3-4

p5

p6-7

Product description

Recycling

Assembly instructions|Radius Divider

Radius Divider Green Furniture Concept3

Metal sheet

Plastic glide

Metal clip

Product descriptionParts

Radius Divider Green Furniture Concept4

Radius Divider can be made to any curvature between 0-45 degrees, both concave and convex. Standardmodules are straight and convex /concave 45 degrees.

Product descriptionApperance

Color & pattern

Standard or custom colors can be chosen as well as color mixes. The Radius Divider comes with cut out holes for a see-through effect (custom patterns possible) or plain which gives a surface where a message or imagecan be applied.

Curvature

Radius Divider Green Furniture Concept5

Glides are made of PE and are sorted as plastic.

Recycling

Sheets, clips and small parts are made of steel and are sorted as metal.

Radius Divider Green Furniture Concept6

Divider metal sheet x1 Divider glides x2 Divider clip x1

Screw A x6

Assembly instructionsIOU Back

Bolt A x1

Radius Divider Green Furniture Concept7

Insert the metal sheet into the plastic glides.

Slide the clip between the metal sheets to makethe Dividers stable. The clip should be placed200 milimeters from the top.

Use screw A to attach the metal sheet to theplastic glides.

Assembly instructionsIOU Back

3 4

1 2

Use two screw A to the outermost rib on eachside to attach the metal sheet to Nova C back.The ideal distance between the metal sheetand Nova C back is 30 milimeters.

Use bolt A to tighten the clip to the metal sheets.

5

greenfc.com