Upload
upoterm
View
130
Download
5
Embed Size (px)
Citation preview
Heating/Cooling Solutions
Uponor Radiant heating /coolingPE-Xa system
Uponor Provario manifold
01-06 © Uponor 2006 Page 3
Uponor Provario manifold
01-06 © Uponor 2006 Page 4
• Last segment with air vent
valve and refill and drain valve with G3/4 hose connection
• Low mounting depth
with/without thermometer 78/68 mm
• Short total length:
for example 6 loops 515 mm
Uponor Provario manifold
01-06 © Uponor 2006 Page 5
• Manifold/collector made of
fibre-glass reinforced polyamid
• 2-12 loops
(EUROCONUS connection)
• With balancing screw
• With topmeter
(indication 0-4 l/min) availible
• Supply valve insert complete
made of plastic
• Return valve insert complete
made of plastic
(without the axis)
Uponor Provario manifold
01-06 © Uponor 2006 Page 6
• With flat sealing connection screw G1
• Connection side could be changed as necessary:
left/right/two-way/down/up
Uponor Provario manifold
01-06 © Uponor 2006 Page 7
Uponor Provario manifold
Field of application
Radiant heating and cooling:
• Operating temperature /pressure
max. 60°C at 6 bar
• Test pressure max. 10 bar (water)
• Test pressure max. 5 bar for max. 2 hours (air) Carry out test procedure according pressure test report
• max. mass flow per manifold 3,5 m³/h
• max. mass flow indication 240 l/h
01-06 © Uponor 2006 Page 8
Figured out accessories
• Uponor Provario hose connection to refilland drain valve
• Uponor Provario Thermometer 0-60°C
• Uponor Provario elbow connection set
• Uponor Provario retaining ring set
• Uponor Provario single segment
• Uponor Provario connection set to
constant temperature supply unit
01-06 © Uponor 2006 Page 9
Simple mounting
Mount the bracket Click in and READY
01-06 © Uponor 2006 Page 10
Valve adjustment without tools
• Lift the adjustment ring
• Adjust calculated value 0-11
• Press down the adjustment ring
• Open hand wheel until the limit stop
• READY!
01-06 © Uponor 2006 Page 11
Exploded view
Uponor Provario manifold
01-06 © Uponor 2006 Page 12
All advantage at one glance
• Easy mounting with click in technology
• Low mounting depth ⇒ could be easily used for light weight construction
• Established plastic technology with fibre-glass reinforcedpolyamid
• Available with balancing screw or with topmeter
• Easy valve adjustment without tools
• With refill and drain valve
• Many different connection possibilities
01-06 © Uponor 2006 Page 13
Manifold valves
• Strengthened hand wheel• Integrated air vent • optimised valve plate in return
valve• Test pressure ≤ 10bar (water)
respectively ≤ 5bar with air
01-06 © Uponor 2006 Page 14
Uponor Provario manifoldProduct assortment
11 manifolds
Alternatively with topmeter or balancing screw
01-06 © Uponor 2006 Page 15
Thank you for your kind attention