Upload
others
View
44
Download
3
Embed Size (px)
Citation preview
Dispersions for architectural coatings
Vinavil 03 V
Ravemul PC2
Vinavil 4555
Vinavil 4528
Ravemul T33
Ravemul T37
Vinavil 4425
Vinavil EVA 4612
Crilat D120S
Crilat 4724
Crilat 4706
Crilat D117
Crilat 4818
Crilat 4816
Vinavil 03 V page 2
Ravemul PC2 page 4
Vinavil 4555 page 6
Vinavil 4528 page 8
Ravemul T33 page 10
Ravemul T37 page 12
Vinavil 4425 page 14
Vinavil EVA 4612 page 16
Crilat D120S page 18
Crilat 4724 page 20
Crilat 4706 page 22
Crilat D117 page 24
Crilat 4818 page 26
Crilat 4816 page 28
INDEX
1
VINAVIL 03 VVINAVIL 03 V is an anionic/non-ionic water dispersion of vinyl-acetate/vinyl-versatate copolymer with 50% solid content, free from alkylphenol-ethoxylates (APEO-free).
PACKAGING
VINAVIL 03 V is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
VINAVIL 03 V remains stable for at least 6 months when stored at temperatures between +5°C ÷ +40°C.
VINAVIL 03 V is suitable for formulating interior/exterior wall paints and coatings at various PVC and has excel-lent rheological behaviour for application of both thin and thick coats.VINAVIL 03 V is highly versatile, easy to formulate and is used in a wide range of paints at medium or high PVC. Products containing VINAVIL 03 V have ex-
cellent properties in terms of binding and adhesion capacity, colour strength and weather resistance. Thanks to all these special characteristics, VINAVIL 03 V is one of the leading dispersion products used in the building industry.VINAVIL 03 V is also used as a fixative for the temporary encapsulation of asbestos cement.
APPLICATIONS
The main characteristics of VINAVIL 03 V are:
a) free from alkylphenol-ethoxylates (APEO-free) b) good water resistance c) high binding power with respect to pigments and fillers d) excellent compatibility with additives and fillers e) excellent rheology behaviour f) highly versatile, suitable for use in various formulates
2
VINAVIL 03 V
3
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 50±1 MVPF 01bis
Brookfield viscosity (1) mPa.s 3.500±500 UNI EN ISO 2555
pH 4.5±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +5 UNI 8490-14
Particle size distribution μm 0.1÷0.6 MVANS 20
Density at 23°C Kg/dm³ 1.06 MVPF 18
Glass transition temperature °C 28±1 MVANS 01
(1) RVT 20 rpm spindle 3, 23°C
INTERIOR PAINT 75% PVCWET SCRUB RESISTANCE – NORM DIN 53778
N° C
ycle
s
Vinavil 03 V Competitor 1 Competitor 2 Competitor 3
1.200
1.000
800
600
400
200
0
RAVEMUL PC2 RAVEMUL PC2 is an anionic/non-ionic water dispersion of vinyl-acetate/vinyl-versatate copolymer with 50% solid content, free from alkylphenol-ethoxylates (APEO-free).
PACKAGING
RAVEMUL PC2 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
RAVEMUL PC2 remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
RAVEMUL PC2 is suitable for formulating interior/exterior paints and coatings at various PVC.Particle size distribution has been specially designed to give paints high hiding power.RAVEMUL PC2 is characterised by its optimum combi-nation of various parameters which have high impact
on finished products for the building industry, such as binding capacity, rheological behaviour, low film sen-sitivity to water, compatibility with various types of fillers, pigments and additives and weather resistance.When used in exterior paints, it gives them the properties of low water absorption and good permeability to vapour.
APPLICATIONS
The main characteristics of RAVEMUL PC2 are:
a) free from alkylphenol-ethoxylates (APEO-free)b) good alkali resistancec) good water resistanced) high hiding powere) excellent compatibility with additives and fillersf) excellent rheology behaviourg) highly versatile, suitable for use in various formulates
4
RAVEMUL PC2
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 50±1 MVPF 01
Brookfield viscosity (1) mPa.s 3.000±500 UNI EN ISO 2555
pH 4.5±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +3 UNI 8490-14
Particle size distribution μm 0.2÷1.2 MVANS 20
Density at 23°C Kg/dm³ 1.06 MVPF 18
Glass transition temperature °C 28±1 MVANS 01
(1) RVT 20 rpm spindle 3, 23°C
COMPONENTS w. % FUNCTION SUPPLIERSWater 28.00
Tego Foamex 1488 0.10 Defoamer Evonik
Natrosol Plus 331 0.40 Thickener Aqualon
Natrosol 250 MBR 0.20 Thickener Aqualon
Soda (sol 10%) 0.10 Neutralizing agent Various
Reotan L 0.50 Dispersant Lamberti
Sodium hexametaphosphate 0.20 Dispersant Various
Disponil PL 400 0.20 Wetting agent Cognis
Acticide SPX 0.28 Biocide Thor
Texanol 0.70 Coalescent Eastman
Ethylene glycol 0.50 Co-solvent Various
TiO2 type RXL 19.00 Pigment Tioxide
CaCO3 type Omyacarb 10AV 17.00 Filler Omya
Polestar 200P 6.50 Filler Imerys
Talc 9.00 Filler LuzenacRavemul PC2 16.00 Binder VinavilTego Foamex 1488 0.10 Defoamer Evonik
Water 1.00
Total 100.00
INTERIOR MATT PAINT WITH HIGH HIDING POWER
Rif. 01 025E E
5
VINAVIL 4555VINAVIL 4555 is an anionic/non-ionic water dispersion of vinyl-acetate/vinyl-versatate copolymer with 55% solid content, free from solvents (plasticizer and coalescing agents) and from alkylphenol-ethoxylates (APEO-free).
PACKAGING
VINAVIL 4555 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
VINAVIL 4555 remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
VINAVIL 4555 is suitable for formulating interior/exterior paints and textured coatings, satin and gloss paints with good adhesion and sheen.Thanks to its special characteristics, formulates con-taining VINAVIL 4555 have good rheological properties and excellent dirt pick-up resistance.Thanks to its high resistance to alkalinity and good weather resistance, it may also be used in the prepa-ration of exterior paints and textured coatings. Paints
at high PVC, formulated with VINAVIL 4555, are cha-racterised by high wet scrub resistance. When used in water paints, the binding power of VINAVIL 4555 is best expressed when coalescing agents are added to lower the filming temperature. The amount used de-pends on the effectiveness of the coalescing agent. For diethylenglycol monobutyl ether acetate, for example, the amount required is 2-3% on the VINAVIL 4555 in the formulation.
APPLICATIONS
The main characteristics of VINAVIL 4555 are:
a) free from alkylphenol-ethoxylates (APEO-free) b) good water resistance c) high binding power with pigments and fillers d) excellent compatibility with additives and fillers e) excellent rheology behaviour f) highly versatile, suitable for various applicationsg) high solid content dispersion
6
VINAVIL 4555
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 55±1 MVPF 01
Brookfield viscosity (1) mPa.s 3.000±1
.000 UNI EN ISO 2555
pH 5.0±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +13 UNI 8490-14
Particle size distribution μm 0.1÷0.6 MVANS 20
Density at 23°C Kg/dm³ 1.1 MVPF 18
Glass transition temperature °C 28±1 MVANS 01
Resistance to freeze-thaw N° of cycles > 5 UNI 8490-13
(1) RVT 20 rpm spindle 3, 23°C
N° C
ycle
s
Vinavil 4555 Competitor 1 Competitor 2 Competitor 4Competitor 3
INTERIOR PAINT 75% PVCWET SCRUB RESISTANCE – NORM DIN 53778
1.200
1.000
800
600
400
200
0
7
VINAVIL 4528 VINAVIL 4528 is an anionic/non-ionic water dispersion of vinyl-acetate/vinyl-versatate copolymer with 50% solid content, free from alkylphenol-ethoxylates (APEO-free).
PACKAGING
VINAVIL 4528 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
VINAVIL 4528 remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
VINAVIL 4528 is suitable for formulating interior/exterior paints and textured coatings and is particularly versatile when used in products with low and high PVC and in wall textured coatings.VINAVIL 4528 has a high binding power in paints with
a medium to high PVC and has good alkali and water resistance.Its specific low viscosity makes it particularly simple to dose when used in automatic plant equipment and ma-kes handling easier during paint manufacturing.
APPLICATIONS
The main characteristics of VINAVIL 4528 are:
a) free from alkylphenol-ethoxylates (APEO-free) b) good water resistance c) high binding power with respect to pigments and fillers d) excellent compatibility with additives and fillers e) excellent rheology behaviour f) highly versatile, suitable for various applications
8
VINAVIL 4528
CHARACTERISTICS VALUE METHODBrookfield RVT Viscosity at 20rpm, 23°C (mPa.s) 10
.000 UNI EN ISO 2555
pH 7.5 ISO 976
Density (g/ml) 1.62 MVPF 18
Solid content (%) 64 MVPF 01
VOC content (g/l) 8.5 ISO 11890
Wet scrub resistance (n° cycles) 1.900 DIN 53778
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 50±1 MVPF 01
Brookfield viscosity (1) mPa.s <500 UNI EN ISO 2555
pH 5.0±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +5 UNI 8490-14
Particle size distribution μm 0.2÷0.4 MVANS 20
Density at 23°C Kg/dm³ 1.1 MVPF 18
Glass transition temperature °C 28±1 MVANS 01
Resistance to freeze-thaw N° of cycles >5 UNI 8490-13
(1) RVT 20 rpm spindle 1, 23°C
COMPONENTS w. % FUNCTION SUPPLIERSWater 24.00
Comiel L 808E 0.20 Defoamer Comiel
Natrosol PLUS 331 0.50 Thickener Aqualon
Soda (sol 10%) 0.10 Neutralizing agent Various
Sodium hexametaphosphate (sol 10%) 2.50 Dispersant Various
Disponil PL 400 0.20 Wetting agent Cognis
Acticide B 20 0.20 Biocide Thor
Texanol 0.40 Coalescent Eastman
Ethylene glycol 0.50 Co-solvent Various
TiO2 type RXL 10.00 Pigment Huntsman
Polestar 200 P 6.00 Filler Imerys
CaCO3 type Omyacarb 5 AV 40.50 Filler OmyaVinavil 4528 14.00 Binder VinavilWater 0.90
Total 100.00
WASHABLE PAINT 75% PVC
9
RAVEMUL T33 RAVEMUL T33 is a water dispersion of a special vinyl terpolymer with 55% solid content, characterised by its high glass transition temperature and low film-forming temperature. Ravemul T33 is free from alkylphenol-ethoxylates (APEO-free).
PACKAGING
RAVEMUL T33 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
RAVEMUL T33 remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
RAVEMUL T33 is particularly suitable for use in for-mulates such as wall textured coatings with high gloss and low dirt pick-up, water paints with low water ab-sorption for conventional applications, high gloss and matt wall enamels. RAVEMUL T33 is characterised by a high glass transition temperature which makes it par-ticularly suitable for wall textured coating at low PVC, with characteristic of poor blocking tendency and low
dirt pick-up retention over the years. The films obtained using RAVEMUL T33 show very high alkali resistance, even at high pH. RAVEMUL T33-based products, there-fore, may be applied on substrates with a high level of alkalinity. We recommend, however, that substrates are verified beforehand to make sure they are well conso-lidated. RAVEMUL T33 is compatible with fillers, pig-ments and the most commonly used additives.
APPLICATIONS
The main characteristics of RAVEMUL T33 are:
a) free from alkylphenol-ethoxylates (APEO-free) b) excellent water resistance c) high gloss d) excellent rheology behavioure) low dirt pick-up f) excellent blocking resistance
10
RAVEMUL T33
CHARACTERISTICS VALUE METHODBrookfield RVT Viscosity at 20 rpm, 23°C (mPa.s) 3
.650 UNI EN ISO 2555
ICI Viscosity at 10˙000 s-1 (Poise) 2.97 ASTM D 4287
pH 7.56 ISO 976
Dirt pick-up (ΔL) 4.74 UNI 10792
Hiding power (RC) 0.99 UNI ISO 3905
Gloss at 20° after 24h 53.4 UNI 9389
Gloss at 60° after 24h 80.5 UNI 9389
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 55±1 MVPF 01
Brookfield viscosity (1) mPa.s 3.000±1
.000 UNI EN ISO 2555
pH 4.5±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +12 UNI 8490-14
Particle size distribution μm 0.4÷1.2 MVANS 20
Density at 23°C Kg/dm³ 1.1 MVPF 18
Glass transition temperature °C 34±1 MVANS 01
Resistance to freeze-thaw N° of cycles >5 UNI 8490-13
(1) RVT 20 rpm spindle 3, 23°C
COMPONENTS w. % FUNCTION SUPPLIERSWater 12.80
Ethylene glycol 2.00 Co-solvent Various
Sodium hexametaphosphate (sol 10%) 1.00 Dispersant Various
Coadis BR3 0.20 Dispersant Coatex
Acticide SPX 0.15 Biocide Thor
Tego Foamex 1488 0.10 Defoamer Evonik
Butyl diglycol acetate 2.00 Coalescent Various
TiO2 type R-HD2 19.50 Pigment Tioxide
Tego Foamex 1488 0.15 Defoamer Evonik
Ammonia (sol 30%) 0.60 Neutralizing agent Various
Rheotech 2000 (*) 3.50 Thickener CoatexRavemul T33 57.00 Binder VinavilWater 1.00
Total 100.00
(*) dilution 1:1 with water
GLOSS PAINTRif. 04 022E E
11
RAVEMUL T37 RAVEMUL T37 is a water dispersion of vinyl-acetate terpolymer with versatic acid esthers. Ravemul T37 is free from alkylphenol-ethoxylates (APEO-free).
PACKAGING
RAVEMUL T37 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
RAVEMUL T37 remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
RAVEMUL T37 is particularly suitable for use in lime-ba-sed paints and coatings for intumescent and fire-retardant paints. Thanks to its high alkali resistance, it is also used as an additive for cement-based systems such as repair mor-tars, construction joints, grout protection and thermal insu-lation finishing systems (EIFS).RAVEMUL T37 is particularly recommended where good hydrophobicity is required, being the polymer film highly wa-
ter resistant. Moreover, thanks to the high alkali resistance and excellent compatibility with cement, it is recommended for applications where the following performance characte-ristics need to be improved: adhesion to the substrate, fle-xibility, dimensional stability during the drying phase, resi-stance to wear and reduction of water permeability.RAVEMUL T37 is highly compatible and stable in lime-ba-sed paints.
APPLICATIONS
The main characteristics of RAVEMUL T37 are:
a) free from alkylphenol-ethoxylates (APEO-free) b) excellent alkali resistance c) high chemical resistance d) excellent compatibility with additives and fillers e) excellent rheology behaviour f) low water absorption
12
RAVEMUL T37
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 50±1 MVPF 01
Brookfield viscosity (1) mPa.s 1.000±500 UNI EN ISO 2555
pH 4.5±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +3 UNI 8490-14
Particle size distribution μm 0.4÷1.2 MVANS 20
Density at 23°C Kg/dm³ 1.1 MVPF 18
Glass transition temperature °C 34±1 MVANS 01
(1) RVT 20 rpm spindle 2, 23°C
Before exposure After exposure
INTUMESCENT COATINGS BEFORE AND AFTER EXPOSURE
In case of fire when exposed to flame, the coating expands to form a protective foam to the substrate where it is applied.
13
VINAVILL 4425 VINAVIL 4425 is an anionic/non-ionic water dispersion of vinyl-acetate/acrylate copolymer with 55% solid content, free from solvents (plasticizer and coalescing agents) and alkylphenol-ethoxylates (APEO-free).
PACKAGING
VINAVIL 4425 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
VINAVIL 4425 remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
VINAVIL 4425 is a vinyl/acrylic dispersion developed for formulating interior paints with high scrub resistance and excellent dirt pick-up resistance.
APPLICATIONS
The main characteristics of VINAVIL 4425 are:
a) free from alkylphenol-ethoxylates (APEO-free)b) high scrub resistance, even at high PVC c) excellent dirt pick-up resistanced) excellent mechanical stabilitye) low water absorption of the filmf) high hiding powerg) good compatibility with additives most commonly used for formulating water paints
14
VINAVIL 4425
UNIT VALUE METHOD 1. SUPPLY SPECIFICATIONSSolid content % 55±1 MVPF 01
Brookfield viscosity (1) mPa.s 1.000±500 UNI EN ISO 2555
pH 4.5±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +7 UNI 8490-14
Particle size distribution μm 0.2÷0.4 MVANS 20
Density at 23°C Kg/dm³ 1.07 MVPF 18
Glass transition temperature °C 28±1 MVANS 01
(1) RVT 20 rpm spindle 1, 23°C
15
N° C
ycle
s
Vinavil 4425 Competitor 1 Vinyl-versatate Styrene-acrylic
INTERIOR PAINT 80% PVCWET SCRUB RESISTANCE – NORM DIN 53778
1.600
1.400
1.200
1.000
800
600
400
200
0
INTERIOR PAINT 80% PVC - DIRT PICK-UP METHOD UNI 10792
VINAVIL 4425 L = 14.8
Vinyl-versatate L = 16.8
Competitor 1 L = 16.3
VINAVIL EVA 4612VINAVIL EVA 4612 is a water dispersion of vinyl-acetate/ethylene copolymer, free from solvents (plasticizer and coalescing agents), alkylphenol-ethoxylates (APEO-free) and is characterised by very low free monomer content.
PACKAGING
VINAVIL EVA 4612 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
VINAVIL EVA 4612 remains stable for at least 6 months when stored at temperatures between +5°C ÷ +40°C.
VINAVIL EVA 4612 is odourless and suitable for the pre-paration of interior/exterior paints, including those at high PVC, satin paints and wall textured coatings where a low content of volatile organic compounds (VOC) is required.VINAVIL EVA 4612 allows the formulation of paints in accordance to Ecolabel norms, which are identified by a specific labelling.The VINAVIL EVA 4612 contained in formulates develo-
pes very good rheology to make application easier, high binding, hiding properties and excellent compatibility with pigment pastes. Thanks to the presence of ethylene in the monomer composition, VINAVIL EVA 4612 has a mini-mum film-forming temperature (MFFT) of 0°C. This pro-perty allows painting products to be formulated without the use of coalescing agents and plasticizer, which redu-ces VOC content to levels well below 1 g/l.
APPLICATIONS
The main characteristics of VINAVIL EVA 4612 are:
a) free from alkylphenol-ethoxylates (APEO-free) b) no coalescing agent for film-forming required c) good water resistance d) high binding power with respect to pigments and fillers e) excellent compatibility with additives and fillers f) excellent rheology behaviour g) low content of volatile organic compounds (VOC)
16
VINAVIL EVA 4612
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 52±1 MVPF 01
Brookfield viscosity (1) mPa.s 3.500±1
.000 UNI EN ISO 2555
pH 4.5±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C 0 UNI 8490-14
Particle size distribution μm 0.2÷0.6 MVANS 20
Density at 23°C Kg/dm³ 1.1 MVPF 18
Glass transition temperature °C 12±1 MVANS 01
(1) RVT 20 rpm spindle 3, 23°C
In spite of the differences of VOC content, all tested samples are conforming to 2004/42/CE.
MEASUREMENT VOC EMISSIONS OF PAINTSWITH GC-MASS METHOD EN 13999-1 PART 2
VOC
(mg/
m3 )
Paint75% PVCAcV/VeoVa
Paint75% PVC
Vinavil EVA 4612
Low-VOCpaint fromEngland
Low-VOC paint from
Italy
10.000
9.000
8.000
7.000
6.000
5.000
4.000
3.000
2.000
1000
0
After 24 hours After 10 days
101
1.234
74
23 12 38
2.021
9.647
17
CRILAT D120S CRILAT D120S is a water dispersion of styrene/acrylic copolymer used as a binder in the preparation of interior/exterior wall paints and textured coatings such as quartz, silicate, siloxane and coloured renders.
PACKAGING
CRILAT D120S is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
CRILAT D120S remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
CRILAT D120S is a multi-purpose, styrene/acrylic di-spersion used in a multitude of interior/exterior paint formulations, including those at high PVC with excel-lent wet scrub resistance, quartz paints, wall textured coatings and coloured renders.CRILAT D120S is highly compatible with hydraulic and mineral binders which makes it suitable for formula-ting cementitious and silicate-based products.The high water resistance of the CRILAT D120S film offers the best solution when formulates, characteri-
sed by high water resistance (paints, wall textured co-atings, covering products for roofs and terraces) and formulates without pigments, are required.Thanks to the high binding power of CRILAT D120S, paints at high PVC with excellent wet scrub resistance may be prepared.The excellent alkali resistance allows the prepara-tion of paints and wall textured coatings suitable for exterior applications, also on substrates with high alkalinity.
APPLICATIONS
The main characteristics of CRILAT D120S are:
a) free from solvents or coalescing agents and plasticizer b) high water resistance c) good compatibility with hydraulic binders, minerals and polysiloxane d) excellent adhesion e) high binding power with respect to pigments and fillers f) excellent alkali resistance g) highly versatile, suitable for various applications
18
CRILAT D120S
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 50±1 MVPF 01
Brookfield viscosity (1) mPa.s 9.000±3
.000 UNI EN ISO 2555
pH 8.0±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +18 UNI 8490-14
Particle size distribution μm 0.08÷0.15 MVANS 20
Density at 23°C Kg/dm³ 1.06 MVPF 18
Glass transition temperature °C 26±1 MVANS 01
Resistance to freeze-thaw N° of cycles >5 UNI 8490-13
(1) RVT 20 rpm spindle 5, 23°C
Dynamometer Alliance MTS RT/50Break value: 0.9 MPa
Type of break: A (break of substrate)
MEASUREMENT OF ADHESION BY TENSILE TEST OF A TEXTURED COATING BASED ON CRILAT D120S UNI EN ISO 4624
19
CRILAT 4706
CRILAT 4724
CRILAT 4818
CRILAT 4816
CRILAT D117
CRILAT D120S
Broo
kfiel
d RV
T vi
scos
ity a
t 20
rpm
, 23°
C (m
Pa. s
)
SILICA PAINTS: ACCELERATING STORAGE STABILITY AT 50°C
Days
50.000
45.000
40.000
35.000
30.000
25.000
20.000
15.000
10.000
5.000
00 15 30
CRILAT 4724CRILAT 4724 is a water dispersion of styrene/acrylic copolymer (APEO-free) used as a binder in the preparation of interior/exterior wall paints and coatings such as quartz, silicate and siloxane paints as well as wall textured coatings and paints at high PVC, with excellent scrub resistance.
PACKAGING
CRILAT 4724 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
CRILAT 4724 remains stable for at least 6 months when stored at temperatures between +5°C ÷ +40°C.
CRILAT 4724 has been developed for a multitude of applications in formulations for interior/exterior paints, wall textured coatings and, thanks to its excellent com-patibility with hydraulic and mineral binders, it is used in cement and silicate-based systems.Even when used in paints at high PVC, because of its high binding power with respect to pigments and fillers,CRILAT 4724 offers excellent wet scrub resistance.
The high water resistance of the CRILAT 4724 film offers the best solution when formulates characterised by high water repellence such as paints, wall textured coatings and covering products for roofs and terraces are required.The excellent alkali resistance allows the preparation of paints and wall textured coatings suitable for exterior applications, also on substrates with high alkalinity and in combination with polysiloxane resins.
APPLICATIONS
The main characteristics of CRILAT 4724 are:
a) free from alkylphenol-ethoxylates (APEO-free) b) high water resistance c) excellent compatibility with hydraulic binders, minerals and polysiloxane d) high binding power, also in paints at high PVC e) excellent alkali resistance f) highly versatile, suitable for various applications
20
CRILAT 4724
CHARACTERISTICS METHOD UNIT VALUE CLASSIFICATIONDirt pick-up ( L) UNI 10792 0.24 Very low
Liquid-water transmission rate (W24) UNI EN 1062-3 (Kg/(m.h0.5)) 0.19 Medium
Water-vapour transmission rate (Sd) UNI EN ISO 7783-2 (m) 0.010 High
Künzel Theory W24 x Sd < 0.1 DIN 18550 (Kg/(m.h0.5)) 0.002 Respected
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 50±1 MVPF 01
Brookfield viscosity (1) mPa.s 9.000±3
.000 UNI EN ISO 2555
pH 8.5±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +15 UNI 8490-14
Particle size distribution μm 0.08÷0.15 MVANS 20
Density at 23°C Kg/dm³ 1.06 MVPF 18
Glass transition temperature °C 24±1 MVANS 01
(1) RVT 20 rpm spindle 5, 23°C
In accordance with Künzel Theory the wall is considered dry when W24 · Sd < 0,1 Kg/(m.h0.5) where:W24<0.5 Kg/(m.h0.5) and Sd <2m
The siloxane paint based on Crilat 4724 has the ability to make the surface hydrophobic by changing the surface tension reaching the drop effect.
SILOXANE PAINT BASED ON CRILAT 4724
21
CRILAT 4706CRILAT 4706 is a water dispersion of styrene/acrylic copolymer free from alkylphenol-ethoxylates (APEO-free) and solvents, which forms a transparent, slightly sticky and flexible film, with excellent water resistance.
PACKAGING
CRILAT 4706 is available in bulk quantities, 1000 L IBC and 125 kg PE drums.
STORAGE
CRILAT 4706 remains stable for at least 6 months when stored at temperatures between +5°C ÷ +40°C.
CRILAT 4706 is suitable for formulating interior/exterior paints, where more flexibility is required compared with conventional styrene/acrylics products.CRILAT 4706 is used for preparing quartz paints and wall textured coatings, water-based membranes, silicate and siloxane-based systems and solvent-free formulates. Thanks to its low film-forming temperature, CRILAT 4706
does not require the addition of coalescing agents in the formulation.The good flexibility of the film allows the preparation of wall textured coatings with no problem of cracking when applied in thick layers. Its high resistance to water, alkali and dirt pick-up, allows the formulation of liquid mem-branes for roofs.
APPLICATIONS
The main characteristics of CRILAT 4706 are:
a) free from alkylphenol-ethoxylates (APEO-free)b) free from solvents or coalescing agents and plasticizer c) no coalescing agent for film-forming required d) high water resistance e) compatible with hydraulic and mineral binders (cement, polysiloxane and silicate) f) good flexibility g) low dirt pick-up h) excellent alkali resistance
22
CRILAT 4706
COMPONENTS w. % FUNCTION SUPPLIERSWater 15.40
Tego Foamex 1488 0.10 Defoamer Evonik
Natrosol 250 MBR 0.30 Thickener Aqualon
Ammonia (sol 28%) 0.10 Neutralizing agent Various
Sodium hexametaphosphate (sol 10%) 1.00 Dispersant Various
Acticide MBS 0.20 Biocide Thor
Disponil PL 400 0.40 Wetting agent Cognis
Reotan L 0.40 Dispersant Lamberti
Propylene glycol 0.40 Co-solvent Various
TiO2 type Tioxide RXL 3.00 Pigment Huntsman
Crilat 4706 60.00 Binder Vinavil
CaCO3 5 μm type Omyacarb 5AV 4.50 Filler Omya
Plastorite 000 14.00 Filler Luzenac
Tego Foamex 1488 0.20 Defoamer Evonik
Total 100.00
CHARACTERISTICS VALUE METHODBrookfield RVT Viscosity at 20 rpm, 23°C (mPa.s) 5
.100 UNI EN ISO 2555
pH 8.34 ISO 976
Dirt pick-up (ΔL) 5.50 low UNI 10792
Strength at break (N/mm2) 1.4 UNI 8490/17
Elongation at break (%) 1.300 UNI 8490/17
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 50±1 MVPF 01
Brookfield viscosity (1) mPa.s 6.000±2
.000 UNI EN ISO 2555
pH 8.0±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C 0 UNI 8490-14
Particle size distribution μm 0.08÷0.14 MVANS 20
Density at 23°C Kg/dm³ 1.06 MVPF 18
Glass transition temperature °C 6±1 MVANS 01
(1) RVT 20 rpm spindle 5, 23°C
WATER PROOF MEMBRANERif. 07 02E E
23
CRILAT D117CRILAT D117 is a water dispersion of acrylic copolymer with 46% solid content, free from alkylphenol-ethoxylates (APEO-free).
PACKAGING
CRILAT D117 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
CRILAT D117 remains stable for at least 6 months when stored at temperatures between +5°C ÷ +40°C.
CRILAT D117 is suitable for formulating exterior paints, tex-tured coatings and decorative interior paints (veiling, etc.).CRILAT D117 gives paints and wall textured coatings ex-cellent characteristics of weather and strong alkali resi-
stance, good colour fastness and low sensitivity to water.Thanks to these properties, the product allows the prepa-ration of various formulates of high quality and of presti-gious products for exterior use (building industry).
APPLICATIONS
The main characteristics of CRILAT D117 are:
a) free from alkylphenol-ethoxylates (APEO-free) b) high water resistance c) high binding power with respect to pigments and fillers d) excellent alkali resistance e) excellent colour strength
24
CRILAT D117
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 46±1 MVPF 01
Brookfield viscosity (1) mPa.s 4.000±1
.500 UNI EN ISO 2555
pH 9.0±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +9 UNI 8490-14
Particle size distribution μm 0.1÷0.2 MVANS 20
Density at 23°C Kg/dm³ 1.06 MVPF 18
Glass transition temperature °C 18±1 MVANS 01
(1) RVT 20 rpm, 23°C, spindle 3
COMPONENTS w. % FUNCTION SUPPLIERSWater 65.40
Ethylene glycol 0.60 Co-solvent Various
Texanol 1.00 Coalescent Eastman
Tego Foamex 1488 0.20 Defoamer Evonik
Acticide SPX 0.20 Biocide Thor
Tego Phobe 1650 7.00 Siloxane binder Evonik
Crilat D117 22.00 Binder Vinavil
Rheothec 2000 3.20 Thickener Coatex
Tego Foamex 1488 0.10 Defoamer Evonik
AMP 90 0.30 Neutralizing agent Angus
Total 100.00
Add the pigment pasta to get the desired colour.
FINISHING VEILED WITH DECORATIVE EFFECT
Rif. 03 040E
25
CRILAT 4818CRILAT 4818 is a water dispersion of acrylic copolymer with 47% solid content, free from alkylphenol-ethoxylates (APEO-free).
PACKAGING
CRILAT 4818 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
CRILAT 4818 remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
CRILAT 4818 is suitable for formulating exterior paints and wall textured coatings with high performance of du-rability and weather resistance. The excellent alkali re-
sistance, the colour fastness, the water resistance and the dirt pick-up of CRILAT 4818 allow the preparation of products where high durability class paints is required.
APPLICATIONS
The main characteristics of CRILAT 4818 are:
a) free from alkylphenol-ethoxylates (APEO-free)b) high water resistancec) high binding power with respect to pigments and fillers, also at high PVCd) excellent alkali resistancee) excellent colour strengthf) high weather resistance
26
CRILAT 4818
Method Exterior paint Exterior paint Exterior paint UNI EN ISO 11507 based on based on based on St/A (1) St/A (2) Crilat 4818 L 85.46 85.88 87.44
a* 7.76 7.37 6.19
b* 23.70 22.82 21.03
200 hours cycle UV-CON ΔE* 1.66 2.17 1.14
400 hours cycle UV-CON ΔE* 5.71 3.19 2.38
600 hours cycle UV-CON ΔE* 9.43 6.54 3.36
800 hours cycle UV-CON ΔE* 11.86 9.18 4.62
1000 hours cycle UV-CON ΔE* 12.95 10.43 5.48
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 47±1 MVPF 01
Brookfield viscosity (1) mPa.s <200 UNI EN ISO 2555
pH 8.5±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C +10 UNI 8490-14
Particle size distribution μm 0.1÷0.2 MVANS 20
Density at 23°C Kg/dm³ 1.06 MVPF 18
Glass transition temperature °C 18±1 MVANS 01
(1) RVT 20 rpm spindle 1, 23°C
COLORIMETRIC MEASUREMENTS OF EXTERIOR PAINTS, AFTER TEST OF ARTIFICIAL WEATHERING EXPOSURE WITH THE USE OF UV LAMPS
UV-CON Cycle:
Segment 1 (4h) 2 (8h)
Water spray ON OFF
UV irradiance OFF ON
27
CRILAT 4816CRILAT 4816 is a water dispersion of acrylic copolymer with 50% solid content, free from solvents (plasticizer and coalescing agents) and from alkylphenol-ethoxylates (APEO-free).
PACKAGING
CRILAT 4816 is available in bulk quantities, 1000 L IBC and 125 Kg PE drums.
STORAGE
CRILAT 4816 remains stablefor at least 6 months when stored at temperatures between +5°C ÷ +40°C.
CRILAT 4816 is suitable for formulating interior/exterior odourless wall paints and coatings with a low impact on the environment. CRILAT 4816 has been developed for formulating inte-rior/exterior paints with a low VOC (volatile organic com-pounds) in compliance with Directive 2004/42/CE.
Its high alkali resistance and excellent colour fastness allow it to be used in exterior paints with characteristics of excellent weather resistance. CRILAT 4816 remains stable in highly alkaline systems, such as lime and potassium silicate.
APPLICATIONS
The main characteristics of CRILAT 4816 are:
a) free from alkylphenol-ethoxylates (APEO-free)b) no coalescing agent for film-forming requiredc) high water resistance d) excellent alkali resistancee) excellent colour strengthf) low dirt pick-upg) good adhesion on old alkyd paintsh) high weather resistance
28
VINAVIL CRILAT 4816
UNIT VALUE METHOD1. SUPPLY SPECIFICATIONSSolid content % 50±1 MVPF 01
Brookfield viscosity (1) mPa.s <1.000 UNI EN ISO 2555
pH 8.0±0.5 ISO 976
2. TYPICAL VALUESMinimum film-forming temperature °C 0 UNI 8490-14
Particle size distribution μm 0.06÷0.12 MVANS 20
Density at 23°C Kg/dm³ 1.06 MVPF 18
Glass transition temperature °C 8±1 MVANS 01
(1) RVT 20 rpm spindle 1, 23°C
29
LIME PAINT (Rif. 02 007E E)ACCELERATED STORAGE STABILITY AT 50°C
51.000
25.750
36.000
24.00016.000
10.000
CRILAT 4816 COMPETITOR
Broo
kfiel
d RV
T vi
scos
ity a
t 20
rpm
, 23°
C
(mPa
. s)
Days
60.000
50.000
40.000
30.000
20.000
10.000
0
0 15 30
Notes:
30
Notes:
31
Published byVinavil S.p.A.
Graphic design – LayoutPensieri e Colori Cooperativa Sociale
PhotosVinavil S.p.A. / Mapei S.p.A.
PrintingArti Grafiche Beta
Milan, March 2011
www.vinavil.com
HEAD OFFICES:VINAVIL AMERICAS Deerfield Beach (Miami) FL | U.S.A. Laval (Montreal) Qc | CANADA
VINAVIL EGYPT Cairo | EGYPT
VINAVIL FAR EAST SINGAPORE
HEADQUARTERS:
VINAVIL S.p.A.Via Valtellina, 63 | 20159 Milano | ITALYTel. +39 02695541 | Fax +39 0269554890