DISPERLITH FoodGrade Elastic - FAKOLITH · DISPERLITH FoodGrade Elastic ... minutes or until the components have blended completely together, and then leave to rest for 1 minute before

Date 28-02-2018 Page 1

DISPERLITH FoodGrade Elastic

PROPERTIES: DISPERLITH FOODGRADE ELASTIC is a special FoodGrade paint or varnish, tested for suitability for coming intodirect contact with foods, water-based dispersion with modified acrylates copolymers, low emissions and low odour (LowVoc), free of Bisphenol A, APEO, ammonium, formaldehyde and heavy metals, highly resistant to dampness and humidity, forinterior and exterior use. DISPERLITH FOODGRADE ELASTIC forms a well-balanced and elastic film of paint, with a satinfinish, that is easy to clean and disinfect, easy to apply and, quick drying, also at low temperatures, from 3ºC, with low odourand providing an excellent finish, in line with the DIN EN 13300 Standard, wet scrub resistance Class 1, covering Class 1 (>250ml/m²), highly impermeable to water vapour, Class 3 (SD = 1.57), and water permeability Class 1 (W = 0.03). DISPERLITHFOODGRADE ELASTIC is a paint with (EC) UNE-EN 1504-2:2005 marking and that is highly resistant to Class 1 and 2aggressive chemical attack, with testing of the food simulants, along with the usual cleaning and disinfecting agents in theirmaximum recommended solutions, TECNALIA Report 050844 and Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜD Germanyand/or Fakolith R&D+i. (For more security, before use, ask your case to our Tech. Department). Available in white and othercolours.

FOODGRADE TECHNOLOGY: DISPERLITH FOODGRADE ELASTIC is certified as a FoodGrade paint, apt for being in directcontact with foods and drinks, and that duly complies with all current European regulations regarding materials that comeinto contact with foods, (EC) Regulation 852/2004, (EC) Regulation 1935/2004, (EC) HACCP Regulation 1895/2005, and (EC)GMP Regulation 2023/2006, as well as Spanish RD 847/2011 and (EU) Commission Regulation No. 10/2011, along with thesubsequent amendments thereto, regarding plastic objects and materials designed to come into contact with foods. To thisend DISPERLITH FoodGrade Elastic has been tested with simulants A, B, C (OM2-40ºC) and D2 (OM2, 20ºC), as shown in thetrials run by Fakolith, through independent certificating entities such as Tecnalia and the CNTA (Spanish National FoodTechnology Centre), among others, insofar as there is compliance in all of the tested cases with the overall and specificmigration limits imposed by the Regulation for the above-mentioned simulants, which are equivalent to all simulants andfood groups. DISPERLITH FOODGRADE ELASTIC has been awarded the Declaration of Food Conformity – Health RegisterFAKOLITH RGSEAA ES-39.005259/T y ROESP E-0043-E.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): DISPERLITH FOODGRADE ELASTIC is an intelligentsanitary paint, treated with BioFilmStop Inhibition Technology, highly resistant to biofilm and bacteria, ISO 22196:2011(Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella

Date 28-02-2018 Page 2

enteritidis, Legionella pneumophila...) also notably improving HACCP, food safety and asepsis in the user company, whilecombining Fakolith’s innovative FOODTECH film protection technology, based on food preservatives.

RECOMMENDED USE: Even though DISPERLITH FOODGRADE ELASTIC does not allow the migration of toxic substances tofoods, because of its dispersion quality it has mainly been designed for use on exposed surfaces (walls, ceilings, skirtingboards, basic food packaging, interiors and exteriors, for contact due to dripping or occasional condensation in general, watertanks, although in general not for use in the enclosed interiors of food or drink tanks and silos, where the use of the FK-45epoxy range is generally recommended, due to its higher level of physicochemical resistance (in case of doubt consult the useof this paint for potable water deposits or other possible cases). Compatible with most surfaces, duly primed should such berequired, lacquer-finish sandwich panels and to cover well-adhered previous coats of dispersion and/or priming paints,resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. The excellent covering and water-vapour barrier qualitiesmean that it functions as an excellent waterproofing film, particularly in severe industrial, climate or sanitary conditions, forthe food industry, health sector, and pharmaceutical or cosmetics industry in general, construction and civil engineering.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application can take place atambient and surface temperatures as low as 2-3ºC and up to a maximum relative humidity of 75%. Following adequatepreparation of the surface DISPERLITH FOODGRADE ELASTIC should be applied undiluted, in two coats, using brushes, rollersor airless spray guns. The surface must be clean, free of hygroscopic salts, microorganisms, etc. and, should such be required,duly primed. Do not apply the second until the first coat has lost its wet sheen and is dry to the touch (in normal conditions,of around 20ºC with a humidity of around 60%, this will be in approx. 2-3 hours). Clean utensils immediately after use withwater. For more information consult the specifications sheet and/or application guidelines, along with the safety sheet.

AVERAGE YIELD: DISPERLITH has a yield of approx. 3-5 m²/l, although this can vary considerably, depending on how it isapplied and the texture and absorption of the surface it is applied to.

Date 28-02-2018 Page 3

FK-45 FoodGrade

DESCRIPTION: FAKOLITH FK-45 FoodGrade is a high-performance, two-component, modified epoxy FoodGrade paint with ahigh solids content, low voc, low odour and EC marking. FK-45 FoodGrade is a FoodGrade epoxy paint that ensures limitationof migrations, generates a high-gloss impermeable film that is easy to clean and disinfect, with water at temperatures of upto 90ºC. The excellent covering and vapour barrier effect qualities of this paint ensure that it will function as an excellentwaterproofing agent and long term anticorrosion treatment, when applied to metals in combination with a correctanticorrosion primer system. Compatible with most of primed surfaces, the duly primed metallic surfaces, lacquer-finishsandwich panels and compatible previous paints and/or primers with good adherence and resistant to cross-cut test Class0-1 UNE-DIN EN ISO 2409:2007. FK-45 FoodGrade is highly resistant to abrasion UNE EN ISO 5470-1:1999 and highly resistantto aggressive chemical attacks UNE EN 1504-2:2005 (chemicals compatible for epoxy), with a UNE Shore hardness of 80±5units, Shore D EN ISO 868:2003. (23±2ºC;50±5%Hr), covering Class 1 (300 µm dry film) and damp rubbing Class 1, DIN EN13300. Paint resistant to the most disinfectant cleaners according to Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜD Germanyand/or Fakolith R&D+i (For more security, before use, ask your case to our Tech. Department). Available in the most frequentindustrial colours (grey, green, red, blue, cream, yellow, black...).

FOOD GRADE PAINT CERTIFIED AS APT FOR DIRECT CONTACT: FK-45 FoodGrade epoxy paint duly complies with all currentEuropean regulations regarding materials that come into contact with foods, (EC) Regulation 852/2004, (EC) Regulation1935/2004, (EC) HACCP Regulation 1895/2005, and (EC) GMP Regulation 2023/2006, as well as Spanish RD 847/2011 and (EU)Commission Regulation No. 10/2011, along with the subsequent amendments thereto, regarding plastic objects and materialsdesigned to come into contact with foods. To this end FK-45 FoodGrade Hygienic has been tested with simulants A, B, C(OM2-40ºC) and D2 (OM2, 20ºC), as shown in the trials run by Fakolith, through independent certificating entities such asTecnalia and the CNTA (Spanish National Food Technology Centre), among others, insofar as there is compliance in all of thetested cases with the overall and specific migration limits imposed by the Regulation for the above-mentioned simulants,which are equivalent to all of the simulants and, as a result are apt for direct contact with all foods and drinks (with theexception of vinegar, which damages epoxy resin). FK-45 FoodGrade Hygienic has been awarded the Declaration of FoodConformity – Health Register FAKOLITH RGSEAA ES-39.005259/T. Available in the most standard industrial colours for thefood industry and the health sector.

RECOMMENDED USE: FK-45 FoodGrade epoxy paint is specifically formulated for the protection and finishing of surfacesthat come into direct contact with all manner of foods and drinks, in line with current European regulations, and is forapplication to the interiors of food tanks and silos, food transport elements, skirting boards, floors, walls, ceilings, objects,machinery, installations, structures, etc. located in interiors. Generally for use in the food industry, the health sector, thepharmaceuticals and cosmetics industry, construction and civil engineering.

HOW TO APPLY: Following adequate preparation of the surface and having confirmed the suitability of the environment,FK-45 FoodGrade paint can be applied by brush or roller, or for finishes and optimum applications using AirMix type sprayingequipment (Airless with air in spray gun and product heater, recommended equipment, Wagner Super Finish 23 Plus). Slowlypour component A into component B (never the other way round), mix together gently using an electric mixer, for at least 2minutes or until the components have blended completely together, and then leave to rest for 1 minute before starting to

Date 28-02-2018 Page 4

apply. When mixing always use complete batches of component A and component B, to avoid errors in the mixing ratio.Carefully plan application, bearing in mind the possibly short pot-life of the mix. Can be applied over fibreglass nettingsystems in tanks and on floors mixed with non-slip quartz sand. Should it be necessary adjust the viscosity of the paint bythinning with 5-10% of special FoodGrade solvent, FK-45 Solvent OEM.

ATTENTION TO THE CONDITIONS OF APPLICATION AND CURING: The drying times and the waiting time for the second coatdepend on the actual thickness of the layer, the temperature, the relative humidity and the ventilation. The ambienttemperature and the base temperature, as well as that of the paint should never be lower than + 10ºC or higher than 35ºC,and the relative humidity should not be higher than 70-75%. The surface temperature of the base to be painted shouldalways be at least 3°C above the dew point to avoid condensation. It is estimated that the ideal application temperature isaround 20ºC and 60% relative humidity. In the event that environmental conditions are not appropriate for its applicationand curing, these should be adapted with extraction and ventilation of air, either at room temperature, with cold or heat,with dehumidifiers, etc., until the environmental conditions are adequate and stable during the application and curing, andalways avoiding the generation of moisture condensation, since this would prevent the proper curing of the paint, especiallymade to monitor in tanks and confined spaces. Epoxy paint should not be in contact with water or surface condensationduring the first 72 hours of curing, or the paint may not cure properly, appearing "Amine Blush" wash spots.

DEPOSITS OF FOOD LIQUIDS: In general, the film will present its complete curing, from 10 to 14 days for contact with foodand drinks (cured at 23ºC, 50% relative humidity, layer> 300 microns dry). At a lower temperature and / or higher humidityand layer, the curing time can be significantly increased. On the other hand, if the temperature conditions are higher, thehumidity is lower and / or there is less coating, the curing time can be significantly reduced. It is necessary to maintainsuitable environmental conditions during application and curing, for which it is necessary to use ventilation systems with airextraction and hot air, preferably dehydrated, avoiding condensation, to maximize the curing conditions. Before filling a tankthat has been coated with FK-45 FoodGrade paints range, the complete curing of the film should be checked, as well as atleast an initial cleaning on the entire surface, with clear water, or preferably with neutral soap and later rinse.

OTHER GENERAL APPLICATIONS: the painting offers good general resistance, at least after 72 hours of curing, although werecommend not to subject the paint film to severe chemical-physical aggressions until it has been cured for at least 1 week(walls, floors, ceilings, indirect contact).

AVERAGE YIELD: according to recommended coat thickness, depending on use of FK-45 FoodGrade

- For a dry thickness in microns of 200 µm – consumption is 302 gr/m² - a yield of 3.31 m²/kg.- For a dry thickness in microns of 300 µm - consumption is 453 gr/m² - a yield of 2.21 m²/kg.- For a dry thickness in microns of 400 µm - consumption is 604 gr/m² - a yield of 1.66 m²/kg.- For a dry thickness in microns of 500 µm - consumption is 755 gr/m² - a yield of 1.32 m²/kg.- For a dry thickness in microns of 662 µm - consumption is 1 kg/m² - a yield of 1.00 m²/kg.

Date 28-02-2018 Page 5

FK-45 FoodGrade Hygienic

DESCRIPTION: FAKOLITH FK-45 Foodgrade Hygienic is a high-performance, two-component, modified epoxy novoloacFoodGrade paint with a high solids content, low voc, low odour and CE marking, with a higher level of physicochemicalresistance and performance than FK-45 FoodGrade. FK-45 FoodGrade Hygienic is a FoodGrade epoxy paint that ensureslimitation of toxic migrations, generates a high-gloss impermeable film that is easy to clean and disinfect, with water attemperatures of up to 90ºC. The excellent covering and vapour barrier effect qualities of this paint ensure that it willfunction as an excellent waterproofing agent and long term anticorrosion treatment, when applied to metals in combinationwith a correct anticorrosion primer system. Compatible with most duly primed mineral and metallic surfaces, lacquer-finishsandwich panels and previous, well adhered coats of compatible paints and/or primers, resistant to cross-cut test Class 0-1UNE-DIN EN ISO 2409:2007. FK-45 FoodGrade Hygienic is highly resistant to abrasion UNE EN ISO 5470-1:1999 and extremelyresistant to aggressive chemical attacks UNE EN 1504-2:2005 (chemicals compatible for epoxy), with a UNE Shore hardnessof 80±5 units, Shore D EN ISO 868:2003. (23±2ºC;50±5%Hr), covering Class 1 (300 µm dry film) and damp rubbing Class 1,DIN EN 13300. Paint resistant to the most disinfectant cleaners according to Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜDGermany and/or Fakolith R&D+i (For more security, before use, ask your case to our Tech. Department). Available in themost frequent industrial colours (Colourless, Grey Ral 7004, Green Ral 6002, Red Ral 3009, Blue RAL 5012, Ivory Ral 1015,Yellow Ral 1003, Black 9017).

FOOD GRADE PAINT CERTIFIED FOR DIRECT CONTACT: FK-45 FoodGrade Hygienic epoxy paint duly complies with all currentEuropean regulations regarding materials that come into contact with foods, (EC) Regulation 852/2004, (EC) Regulation1935/2004, (EC) HACCP Regulation 1895/2005, and (EC) GMP Regulation 2023/2006, as well as Spanish RD 847/2011 and (EU)Commission Regulation No. 10/2011, along with the subsequent amendments thereto, regarding plastic objects and materialsdesigned to come into contact with foods. To this end FK-45 FoodGrade Hygienic has been tested with simulants A, B, C(OM2-40ºC) and D2 (OM2, 20ºC), as shown in the trials run by Fakolith, through independent certificating entities such asTecnalia and the CNTA (Spanish National Food Technology Centre), among others, insofar as there is compliance in all of thetested cases with the overall and specific migration limits imposed by the Regulation for the above-mentioned simulants,which are equivalent to all of the simulants and, as a result are apt for direct contact with all foods and drinks (with theexception of vinegar, which damages epoxy resin). FK-45 FoodGrade Hygienic has been awarded the Compliance Declaration– Sanitary Registration FAKOLITH RGSEAA ES-39.005259/T. Available in the most standard industrial colours for the foodindustry and the health sector.

BPA-FREE TECHNOLOGY: As an added value, FK-45 Foodgrade Hygienic has been developed with BPA-free technology resins,and is also free of Bisphenol A, a still allowed component, but now present in the SHVC EU list (Substances of very highconcern). Bisphenol A has been forbidden in France and progressively will be in other countries.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): FK-45 Foodgrade Hygienic is a FoodGrade paint thatreconciles FoodGrade Technology and Sanitary BioFilmStop Inhibition Technology, highly resistant to biofilm bacteria andmould, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcusaureus, Salmonella enteritidis, Legionella pneumophila...) and, moreover, notably improving HACCP, food safety and asepsisfor the user company, while combining Fakolith’s innovative FOODTECH film protection technology, based on food

Date 28-02-2018 Page 6

preservatives.

RECOMMENDED USE: FK-45 FoodGrade Hygienic epoxy paint is specifically formulated for the protection and finishing ofsurfaces that come into direct contact with nearly all manner of foods and drinks, in line with current European regulations,and is for application to the insides of food tanks and silos, food transport elements, skirting boards, floors, walls, ceilings,objects, machinery, installations, structures, etc. located in interiors. Generally, for use in the food industry, the healthsector, the pharmaceuticals and cosmetics industry, construction and civil engineering.

HOW TO APPLY: Following adequate preparation of the surface and having confirmed the suitability of the environment,FK-45 FoodGrade Hygienic paint can be applied by brush or roller, or for finishes and optimum applications using AirMix typespraying equipment (Airless with air in spray gun and product heater, recommended equipment, Wagner Super Finish 23Plus). Slowly pour component A into component B (never the other way round), mix together gently using an electric mixer,for at least 2 minutes or until the components have blended completely together, and then leave to rest for 1 minute beforestarting to apply. When mixing always use complete batches of component A and component B, to avoid errors in the mixingratio. Carefully plan application, bearing in mind the possibly short pot-life of the mix. Can be applied over fibreglass nettingsystems in tanks and on floors mixed with non-slip quartz sand. Should it be necessary adjust the viscosity of the paint bythinning with 5-10% of special FoodGrade solvent, FK-45 Solvent OEM.

ATTENTION TO THE CONDITIONS OF APPLICATION AND CURING: The drying times and the waiting time for the second coatdepend on the actual thickness of the layer, the temperature, the relative humidity and the ventilation. The ambienttemperature and the base temperature, as well as that of the paint should never be lower than + 10ºC or higher than 35ºC,and the relative humidity should not be higher than 70-75%. The surface temperature of the base to be painted shouldalways be at least 3 ° C above the dew point to avoid condensation. It is estimated that the ideal application temperature isaround 20ºC and 60% relative humidity. In the event that environmental conditions are not appropriate for its applicationand curing, these should be adapted with extraction and ventilation of air, either at room temperature, with cold or heat,with dehumidifiers, etc., until the environmental conditions are adequate and stable during the application and curing, andalways avoiding the generation of moisture condensation, since this would prevent the proper curing of the paint, especiallymade to monitor in tanks and confined spaces. Epoxy paint should not be in contact with water or surface condensationduring the first 72 hours of curing, or the paint may not cure properly, appearing "Amine Blush" wash spots.



FORCED DRYING: in general, applications with forced drying with hot air dehydrated can greatly reduce the drying, curing andcommissioning time. An example of this can be the application in interior of pipes, where specialist companies after theapplication with systems and special equipment, artificially circulate a current of hot dehydrated air, and after checking thecorrect curing, make a later washing with water, before of the definitive commissioning. The contribution of heat at a highertemperature shortens the programming of the curing cycle. For more details, consult technical data sheet and / orapplication guides, and safety data sheet.

AVERAGE YIELD: according to recommended coat thickness, depending on use of FK-45 FoodGrade Hygienic

- For a dry thickness in microns of 200 µm - consumption is 272 gr/m² - a yield of 3.68 m²/kg.- For a dry thickness in microns of 300 µm - consumption is 407 gr/m² - a yield of 2.46 m²/kg.- For a dry thickness in microns of 400 µm - consumption is 543 gr/m² - a yield of 1.84 m²/kg.- For a dry thickness in microns of 500 µm - consumption is 678 gr/m² - a yield of 1.47 m²/kg.- For a dry thickness in microns of 736 µm - consumption is 1 kg/m² - a yield of 1.00 m²/kg.

Date 28-02-2018 Page 7

FAKOPUR FoodGrade (Soon available)

1 and 5 l. Kits (A+B)

DESCRIPTION: FAKOPUR FoodGrade is a 2-component polyurethane food contact safe paint, based on foodgrade aromaticsolvent with fast-evaporating and drying, free of Bisphenol A, APEO, ammonia, formaldehyde and heavy metals, with highresistance to humidity, for indoor and outdoor use. FAKOPUR FoodGrade forms a balanced paint film, easy to apply, quickdrying, and glossy finish, which according to DIN EN 13300 is resistant to wet scrubbing Class 1 (<5μm), covering Class 2 (9.6m²/l) and Class 1 (6.2 m²/l). Good adhesion over multiple surfaces, excellent flexibility, resistance to abrasion. Apply over drybases from 5ºC and max. 75% relative humidity. Paint with excellent resistance to weathering, and to most of the cleanersand disinfectants according to Test DIN EN ISO 4628-2: 2004-01 made by TÜV SÜD Germany and/or Fakolith R+D+i.Polyurethane paints generally have better resistance to acid solutions and outdoors, but worse resistance to alcoholicsolutions than those based on epoxy resins (for more security consult before our Technical Department). Available in WhiteRAL 9010, Grey RAL 7004, Metallic Grey RAL (9006), Green RAL 6002, and blue RAL 5012, check availability and minimumquantity for other colors.

FOODGRADE TECHNOLOGY: FAKOPUR FoodGrade polyurethane paint duly complies with all current European regulationsfor food contact materials, Regulation CE 852/2004, Regulation 1935/2004/CE, Regulation CE 1895/2005, production underGMP, HACCP and Regulation CE 2023/2006, as well as RD 847/2011 and Regulation (EU) No. 10/2011 of the Commission andits subsequent amendments on materials and plastic objects destined to come into contact with food. For this FAKOPURFoodGrade has been tested with simulants A, B, C and D2 (OM2-40ºC), as shown in tests carried out by Fakolith inindependent certified entities such as the National Centre for Technology and Food Safety (CNTA), among others, andcomplies in all tested cases with the limits of global and specific migration imposed by Regulations for the afore mentionedsimulants that are equivalent to all food groups and therefore to the aptitude for direct contact with nearlly all foods andbeverages (exception: alcoholic beverages greater than 20º). FAKOPUR FoodGrade has a Food Contact Declaration ofCompliance – Sanitary Registration FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

BIOFILMSTOP SANITARY TECHNOLOGY (treated article BPR Art.3): FAKOPUR FoodGrade is a food contact paint thatcombines FoodGrade Technology with BioFilmStop Inhibition Technology, highly resistant to biofilm and bacteria, ISO22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus,Salmonella enteritidis, Legionella pneumophila...) also notably improving HACCP, food safety and asepsis in the usercompany, while combining Fakolith’s innovative FOODTECH film protection technology, based on food preservatives.

RECOMMENDED USE: FAKOPUR FoodGrade polyurethane is specially formulated for the protection and finishing of surfacesin direct contact with almost all types of food and drinks, according to European regulations. Although FAKOPUR FoodGradeafter its proper cure does not migrate toxic substances to food, due to its nature has been designed mainly for its use in opensurfaces, objects and various elements, both indoors and outdoors, but in general is not recommended as unique coatinginside food and beverage containers, where we recommend in general the use of the FK-45 FoodGrade epoxy range, due to itshigher level of physicochemical resistance (in case of doubt ask our technical service). Compatible with several duly primed orpainted surfaces, well-adhered and resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. It has excellentphysicochemical resistance, fast-drying glossy paint, dries even at low temperatures, suitable for OEM painting, maintenanceand renovation of multiple surfaces, such as agricultural trailers and other food transport elements, machinery, equipment

Date 28-02-2018 Page 8

and other objects for the food industry, health sector, pharma and cosmetics, industry in general, construction and civilworks. Its fast-evaporating foodgrade solvent gives off an intense odor during application and drying, so it is notrecommended its application at food processing or sanitary plants at the working day. Application recommended betterduring technical stops providing adequate air ventilation, or OEM industries.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated or splashed. After the adequate preparation of thebase and having checked the aptitude of the environment, FAKOPUR FoodGrade is applicable with brush, roller or for AirlessAirMix (Airless with air in gun and product heater, recommended equipment Wagner Super Finish 23 Plus). Slowly pourcomponent B over component A, and stir it at low speed for at least 2 minutes until it is correctly homogenized. Add and mixuntil complete homogenization the required solvent SOLPUR FG Solvent (can be diluted according to need between 5-15%).Always mix complete sets of A+B to avoid errors in the mixing ratio. In general, the film will be completely cured after 3-7days and ready for contact with foods (cured at 23ºC, with relative humidity of 50% and a dry film coat 150 microns). Formore details, consult technical sheet and / or application guides, and safety data sheet

AVERAGE YIELD: according to recommended coat thickness, depending on use of FAKOPUR FoodGrade

- For a dry thickness in microns of 50 µm – consumption is 111 ml./m² - a yield of 9 m²/l.- For a dry thickness in microns of 75 µm - consumption is 167 ml./m² - a yield of 6 m²/l.- For a dry thickness in microns of 150 µm - consumption is 222 ml./m² - a yield of 4,5 m²/l.

Date 28-02-2018 Page 9

DISPERSOL FoodGrade (Soon available) EU and FDA compliant

DESCRIPTION: DISPERSOL FoodGrade is an enamel dispersion food contact safe paint, based on a non-aromatic solvent, and100% pure acrylates, low odor, free of APEO, ammonia, formaldehyde and heavy metals, with high resistance to humidity,for indoor and outdoor use. DISPERSOL FoodGrade forms a highly balanced enamel paint film, stain-insulating, easy to apply,quick drying, low odor and excellent matte finish, which conforms to DIN EN 13300 is wet scrub resistant Class 1, withcovering Class 2 (250 ml / m²), excellent water vapor permeability Class 1 (SD = 0.48), and very low water absorption Class 3(W = 0.05). Generally, it has good adhesion on multiple surfaces. It could be applied in a temperature from 2-3ºC (without iceand in dry environment and base) and max. 75% relative humidity. This paint is resistant to most of disinfectants andcleaners according to Test DIN EN ISO 4628-2: 2004-01 made by TÜV SÜD Germany and / or Fakolith R+D+i. (For moresecurity consult before its use our Technical Department). Available in white, grey RAL 7004, metallic grey RAL (9006), greenRAL 6002, and blue RAL 5012, check availability and minimum quantity for other colors.

FOODGRADE FDA and EU TECHNOLOGY: DISPERSOL FoodGrade is certified as enamel food contact paint suitable for directand indirect contact with food and beverages, within the Official R & D & I project "FDA & EU FOODGRADE COATINGSRTC-2016-5067-2" that Fakolith leads together with the Technological Center AIMPLAS. As a novelty, complies with the 2standards for food-grade paints of international reference, both the American FDA 21 CFR 175.300 and the EuropeanRegulation EU 10/2011, in addition to complying with all the rest of the in force regulations for food contact materials, ECRegulation 852/2004, Regulation 1935/2004 / CE, Regulation EC 1895/2005, separate production under HACCP andRegulation EC 2023/2006 GMP, as well as RD 847/2011 and subsequent updates as Regulation (EU) No. 10/2011 and FDA 21CFR 175.300. DISPERSOL FoodGrade has the mandatory Compliance Declaration - with all the tests and rules for foodcontact, traceability and good praxis manufacturing that it complies. Sanitary Registration FAKOLITH RGSEAAES-39.005259/T and ROESP E-0043-E.

BIOFILMSTOP SANITARY TECHNOLOGY (treated article BPR Art.3 and FDA 21 CFR 175.300): DISPERSOL FoodGrade combinesFoodGrade Technology with BioFilmStop Inhibition Technology, highly resistant to biofilm and bacteria, ISO 22196:2011(Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonellaenteritidis, Legionella pneumophila...) also notably improving HACCP, food safety and asepsis in the user company, whilecombining Fakolith’s innovative FOODTECH film protection technology, based on food preservatives.

RECOMMENDED USE: DISPERSOL FoodGrade does not allow the migration of toxic substances to foods, as dispersionenamel paint it has mainly been designed for use on open surfaces (walls, ceilings, skirting boards, machinery, equipment,panels, various mineral objects, wood, metal, both indoors and outdoors, in contact to dripping or occasional condensationbut general not for foods or drinks tanks, where we recommend the use of the FK-45 FoodGrade epoxy range, due to itshigher level of physicochemical resistance (in case of doubt consult our technical department). Compatible with several dulyprimed or painted surfaces, well-adhered and resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. Its has goodphysicochemical resistance as low odor enamel paint, even dries at low temperatures, is ideal for painting and renovating.several kinds of surfaces at the food industry, health sector, and pharmaceutical or cosmetics industry in general,construction and civil engineering.

Date 28-02-2018 Page 10

HOW TO APPLY: Carefully protect all surfaces that are not to be treated or splashed. Application can take place at ambientand surface temperatures as low as 2-3ºC and up to a maximum relative humidity of 75%. Following adequate preparation ofthe surface DISPERSOL FoodGrade should be applied undiluted, in two coats, using brushes, rollers or airless. The surfacemust be clean, free of hygroscopic salts, microorganisms, etc. and, duly primed if required. Do not apply the second until thefirst coat has lost its gloss and is touch dry (in normal conditions, around 20ºC with a relative humidity 60%, approx. 2-3hours). Clean utensils after use with DlSPERSOL FG Solvent. For further details, consult technical and safety data sheetand/or application guides.

AVERAGE YIELD: DlSPERSOL FoodGrade has a yield of approx. 3-5 m²/l, applied in two hands, although this can varyconsiderably, depending on how it is applied and the texture and absorption of the surface.

IMPORTANT NOTE: This product is in process of approval and testing, so the information offered here is an informativeadvance. It will be updated continuously until the issuance of its definitive technical and safety data sheet, and its launchingon the market.

Date 28-02-2018 Page 11

DISPERSOL FoodGrade Varnish (Soon available) EU and FDA compliant

DESCRIPTION: DISPERSOL FoodGrade Varnish is a colorless food contact safe varnish, based on foodgrade aromatic solvent,and 100% pure acrylates, free of Bisfenol A, APEO, ammonia, formaldehyde and heavy metals, with high resistance tohumidity, for indoor and outdoor use. DISPERSOL FoodGrade forms a highly balanced varnish film, easy to apply, quickdrying, and excellent glossy finish, which conforms to DIN EN 13300 is resistant to wet scrub Class 1, and very low waterabsorption Class 3 (W = 0.03). Generally, it has good adhesion on several surfaces. It could be applied in a temperature from2-3ºC (without ice and in dry environment and base) and max. 75% relative humidity. Varnish resistant to most ofdisinfectants and cleaners according to Test DIN EN ISO 4628-2: 2004-01 made by TÜV SÜD Germany and / or FakolithR+D+i. (For more security consult before its use our Technical Department).

FOODGRADE FDA and EU TECHNOLOGY: DISPERSOL FoodGrade Varnish is certified as food contact varnish suitable fordirect and indirect contact with food and beverages, within the Official R & D & I project "FDA & EU FOODGRADE COATINGSRTC-2016-5067-2" that Fakolith leads together with the Technological Center AIMPLAS. As a novelty, complies with the 2standards for food-grade paints of international reference, both the American FDA 21 CFR 175.300 and the EuropeanRegulation EU 10/2011, in addition to complying with all the rest of the in force regulations for food contact materials, ECRegulation 852/2004, Regulation 1935/2004 / CE, Regulation EC 1895/2005, separate production under HACCP andRegulation EC 2023/2006 GMP, as well as RD 847/2011 and subsequent updates as Regulation (EU) No. 10/2011 and FDA 21CFR 175.300. DISPERSOL FoodGrade has the mandatory Compliance Declaration - with all the tests and rules for foodcontact, traceability and good praxis manufacturing that it complies. Sanitary Registration FAKOLITH RGSEAAES-39.005259/T and ROESP E-0043-E.

BIOFILMSTOP SANITARY TECHNOLOGY (treated article BPR Art.3 and FDA 21 CFR 175.300): DISPERSOL FoodGrade Varnishcombines FoodGrade Technology with BioFilmStop Inhibition Technology, highly resistant to biofilm and bacteria, ISO22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus,Salmonella enteritidis, Legionella pneumophila...) also notably improving HACCP, food safety and asepsis in the usercompany, while combining Fakolith’s innovative FOODTECH film protection technology, based on food preservatives.

RECOMMENDED USE: After curing process DISPERSOL FoodGrade Varnish does not allow the migration of toxic substancesto foods, because of its dispersion quality it has mainly been designed for use at open surfaces and several objects made ofdifferent materials, mineral, wood, metal, both indoors and outdoors, but not for food and drink tanks, where werecommend the use of the FK-45 FoodGrade epoxy range, due to its higher level of physicochemical resistance (in case ofdoubt ask to our technical department) Compatible with several duly primed or painted surfaces, well-adhered and resistantto cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. It has good physicochemical resistance, dries even at lowtemperatures, suitable for OEM painting, maintenance and renovation in several surfaces, objects for the food industry,health sector, pharmacy and cosmetics, industry in general, construction and civil works. Its fast-evaporating foodgradesolvent gives off an intense odor during application and drying, so it is not recommended its application at food processing orsanitary plants at the working day. Application recommended better during technical stops providing adequate airventilation, or OEM industries.

Date 28-02-2018 Page 12

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashed. Application can take place atambient and surface temperatures as low as 2-3ºC and up to a maximum relative humidity of 75%. Apply DISPERSOLFoodGrade Varnish in two coats (it could be diluted with 5-15% of SOLPUR FG Solvent for a better finish), using brushes,rollers or airless spray guns. Surface must be clean, free of hygroscopic salts, microorganisms, etc., and duly primed ifnecessary. Once the first coat is touch dry, the second one can be applied (in usual conditions 20ºC – 60 % humidity. Approx.1 hour). When cleaning of utensils or dilution is required, use SOLPUR FG Solvent or universal solvent. It will be ready fordirect contact with food between 3-7 days. For further details, consult technical and safety data sheet and/or applicationguides.

AVERAGE YIELD: DISPERSOL FoodGrade Varnish has a yield of approx. 2-5 m²/l, applied in two hands, although this can varyconsiderably, depending on how it is applied and the texture and absorption of the surface.

IMPORTANT NOTE: This product is in process of approval and testing, so the information offered here is an informativeadvance. It will be updated continuously until the issuance of its definitive technical and safety data sheet, and its launchingon the market.

Date 28-02-2018 Page 13

MONOPOX FoodGrade (Soon available) EU and FDA compliant

PROPERTIES: MONOPOX FoodGrade is a new food contact paint or primer, single-component, epoxy with pleasant odor-likefoodgrade alcohol as solvent, free of Bisphenol A, APEO, ammonia, formaldehyde and heavy metals, with high resistance tohumidity, for indoor use. MONOPOX FoodGrade forms a film of technical paint, elastic, waterproof, resistant to immersionin hot water. Good adhesion in general on multiple surfaces. Applicable from 5ºC and max. 75% relative humidity. Paintresistant to most cleaning disinfectants according to Test DIN EN ISO 4628-2: 2004-01 made by TÜV SÜD Germany and / orFakolith R+D +i. (For greater security consult your case prior to use with our Technical Department). Available in white, forother colors check availability and minimum quantity.

FOODGRADE FDA and EU TECHNOLOGY: MONOPOX Foodgrade is certified as food contact epoxy paint suitable for directand indirect contact with food and beverages, within the Official R & D & I project "FDA & EU FOODGRADE COATINGSRTC-2016-5067-2" that Fakolith leads together with the Technological Center AIMPLAS. As a novelty, complies with the 2standards for food-grade paints of international reference, both the American FDA 21 CFR 175.300 and the EuropeanRegulation EU 10/2011, in addition to complying with all the rest of the in force regulations for food contact materials, ECRegulation 852/2004, Regulation 1935/2004 / CE, Regulation EC 1895/2005, separate production under HACCP andRegulation EC 2023/2006 GMP, as well as RD 847/2011 and subsequent updates as Regulation (EU) No. 10/2011 and FDA 21CFR 175.300. MONOPOX Foodgrade Extreme has the mandatory Compliance Declaration - with all the tests and rules forfood contact, traceability and good praxis manufacturing that it complies. Sanitary Registration FAKOLITH RGSEAAES-39.005259/T and ROESP E-0043-E.

BIOFILMSTOP SANITARY TECHNOLOGY (treated article BPR Art.3 and FDA 21 CFR 175.300): MONOPOX Foodgrade combinesFoodGrade Technology with BioFilmStop Inhibition Technology, highly resistant to biofilm and bacteria, ISO 22196:2011(Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonellaenteritidis, Legionella pneumophila...) also notably improving HACCP, food safety and asepsis in the user company, whilecombining Fakolith’s innovative FOODTECH film protection technology, based on food preservatives.

MAIN USE: MONOPOX FoodGrade food paint has been designed mainly for use as primer and finishing paint of sanitary hotwater tanks (SHW) and interior of pipes in buildings, in food industry, health sector, pharma and cosmetics, industry ingeneral, construction and civil works. Due to its good anticorrosive protection it can be applied as a metal primer to the restof our FoodGrade paints, if necessary (Consult our technical department).

APPLICATION PROCEDURE: Protect well all surfaces that should not be treated or splashed. Applicable from 5ºC of ambienttemperature and of the base and maximum 75% relative humidity. MONOPOX FoodGrade will be applied undiluted in twohands, with brushes, rollers or airless. The base should be clean, free of hygroscopic salts, microorganisms, etc., and properlyprimed if required. When the application of the first coat is lighter and dry to the touch, the second coat can be applied(under normal conditions 20ºC-60% humidity, approximately 3 hours). The cleaning of the utensils or dilution if required,will be carried out only with the food solvent FK-45 OEM Solvent. For more details, consult technical data sheet and / orapplication guides, and safety data sheet.

Date 28-02-2018 Page 14

MEDIUM PERFORMANCE: MONOPOX FoodGrade has a performance of approx. of 3-5 m² / l. applied in 2 hands. Dependingon the form of application, texture and absorption of the base can vary appreciably.

IMPORTANT NOTE: This product is in the process of approval and testing, so the information provided here is a theoreticaladvance, and will be updated continuously, until the issuance of its final technical and safety sheet, and put on the market.

Date 28-02-2018 Page 15

FK-45 FoodGrade Extreme (Soon available) FDA and EU compliant

DESCRIPTION: FAKOLITH FK-45 Foodgrade Extreme is a high-performance, two-component, modified epoxy novoloacFoodGrade paint with a high solids content, low voc, low odour and CE marking, with improved drying and curing conditions,at low temperatures and high relative humidity. FK-45 FoodGrade Extreme is a FoodGrade epoxy paint that ensureslimitation of toxic migrations, generates a high-gloss impermeable film that is easy to clean and disinfect, with water attemperatures of up to 90ºC. The excellent covering and vapour barrier effect qualities of this paint ensure that it willfunction as an excellent waterproofing agent and long term anticorrosion treatment, when applied to metals in combinationwith a correct anticorrosion primer system. Compatible with most duly primed mineral and metallic surfaces, lacquer-finishsandwich panels and previous, well adhered coats of compatible paints and/or primers, resistant to cross-cut test Class 0-1UNE-DIN EN ISO 2409:2007. FK-45 FoodGrade Extreme is highly resistant to abrasion UNE EN ISO 5470-1:1999 and extremelyresistant to aggressive chemical attacks UNE EN 1504-2:2005 (chemicals compatible for epoxy), with a UNE Shore hardnessof 80±5 units, Shore D EN ISO 868:2003. (23±2ºC;50±5%Hr), covering Class 1 (300 µm dry film) and damp rubbing Class 1,DIN EN 13300. Paint resistant to the most disinfectant cleaners according to Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜDGermany and/or Fakolith R&D+i (For more security, before use, ask your case to our Tech. Department). Available in themost frequent industrial colours (Colourless, Grey Ral 7004, Green Ral 6002, Red Ral 3009, Blue RAL 5012, Ivory Ral 1015,Yellow Ral 1003, Black 9017).

FOODGRADE FDA and EU TECHNOLOGY: FK-45 Foodgrade Extreme is certified as food contact epoxy paint suitable fordirect and indirect contact with food and beverages, within the Official R & D & I project "FDA & EU FOODGRADE COATINGSRTC-2016-5067-2" that Fakolith leads together with the Technological Center AIMPLAS. As a novelty, complies with the 2standards for food-grade paints of international reference, both the American FDA 21 CFR 175.300 and the EuropeanRegulation EU 10/2011, in addition to complying with all the rest of the in force regulations for food contact materials, ECRegulation 852/2004, Regulation 1935/2004 / CE, Regulation EC 1895/2005, separate production under HACCP andRegulation EC 2023/2006 GMP, as well as RD 847/2011 and subsequent updates as Regulation (EU) No. 10/2011 and FDA 21CFR 175.300. FK-45 Foodgrade Extreme has the mandatory Compliance Declaration - with all the tests and rules for foodcontact, traceability and good praxis manufacturing that it complies. Sanitary Registration FAKOLITH RGSEAAES-39.005259/T and ROESP E-0043-E.

BIOFILMSTOP SANITARY TECHNOLOGY (treated article BPR Art.3 and FDA 21 CFR 175.300): FK-45 Foodgrade Extremecombines FoodGrade Technology with BioFilmStop Inhibition Technology, highly resistant to biofilm and bacteria, ISO22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus,Salmonella enteritidis, Legionella pneumophila...) also notably improving HACCP, food safety and asepsis in the usercompany, while combining Fakolith’s innovative FOODTECH film protection technology, based on food preservatives.

BPA-FREE TECHNOLOGY: As an added value, FK-45 Foodgrade Extreme has been developed with BPA-free technology resins,and is also free of Bisphenol A, a still allowed component, but now present in the SHVC EU list (Substances of very highconcern). Bisphenol A has been forbidden in France and progressively will be in other countries.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): FK-45 Foodgrade Extreme is a FoodGrade paint that

Date 28-02-2018 Page 16

reconciles FoodGrade Technology and Sanitary BioFilmStop Inhibition Technology, highly resistant to biofilm bacteria andmould, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcusaureus, Salmonella enteritidis, Legionella pneumophila...) and, moreover, notably improving HACCP, food safety and asepsisfor the user company, while combining Fakolith’s innovative FOODTECH film protection technology, based on foodpreservatives.

RECOMMENDED USE: FK-45 FoodGrade Extreme epoxy paint is specifically formulated for the protection and finishing ofsurfaces that come into direct contact with nearly all manner of foods and drinks, in line with current European regulations,and is for application to the insides of food tanks and silos, food transport elements, skirting boards, floors, walls, ceilings,objects, machinery, installations, structures, etc. located in interiors. Generally, for use in the food industry, the healthsector, the pharmaceuticals and cosmetics industry, construction and civil engineering.

HOW TO APPLY: Following adequate preparation of the surface and having confirmed the suitability of the environment,FK-45 FoodGrade Extreme paint can be applied by brush or roller, or for finishes and optimum applications using AirMix typespraying equipment (Airless with air in spray gun and product heater, recommended equipment, Wagner Super Finish 23Plus). Slowly pour component A into component B (never the other way round), mix together gently using an electric mixer,for at least 2 minutes or until the components have blended completely together, and then leave to rest for 1 minute beforestarting to apply. When mixing always use complete batches of component A and component B, to avoid errors in the mixingratio. Carefully plan application, bearing in mind the possibly short pot-life of the mix. Can be applied over fibreglass nettingsystems in tanks and on floors mixed with non-slip quartz sand. Should it be necessary adjust the viscosity of the paint bythinning with 5-10% of special FoodGrade solvent, FK-45 Solvent OEM.

ATTENTION TO THE CONDITIONS OF APPLICATION AND CURING: The drying times and the waiting time for the second coatdepend on the actual thickness of the layer, the temperature, the relative humidity and the ventilation. The ambienttemperature and the base temperature, as well as that of the paint should never be lower than + 3ºC or higher than 35ºC,and the relative humidity should not be higher than 80%. The surface temperature of the base to be painted should alwaysbe at least 3 ° C above the dew point to avoid condensation. It is estimated that the ideal application temperature is around20ºC and 60% relative humidity. In the event that environmental conditions are not appropriate for its application andcuring, these should be adapted with extraction and ventilation of air, either at room temperature, with cold or heat, withdehumidifiers, etc., until the environmental conditions are adequate and stable during the application and curing, and alwaysavoiding the generation of moisture condensation, since this would prevent the proper curing of the paint, especially made tomonitor in tanks and confined spaces. Epoxy paint should not be in contact with water or surface condensation during thefirst 72 hours of curing, or the paint may not cure properly, appearing "Amine Blush" wash spots.



FORCED DRYING: in general, applications with forced drying with hot air dehydrated can greatly reduce the drying, curing andcommissioning time. An example of this can be the application in interior of pipes, where specialist companies after theapplication with systems and special equipment, artificially circulate a current of hot dehydrated air, and after checking thecorrect curing, make a later washing with water, before of the definitive commissioning. The contribution of heat at a highertemperature shortens the programming of the curing cycle. For more details, consult technical data sheet and / orapplication guides, and safety data sheet.

AVERAGE YIELD: according to recommended coat thickness, depending on use of FK-45 FoodGrade Extreme


Date 28-02-2018 Page 17

DISPERLITH HYGIENIC

PROPERTIES: DISPERLITH HYGIENIC is the first ecological paint to be awarded European Union Ecolabel Certification, Reg. No.ES-CAT/044/001, in accordance with the new, and demanding, Ecolabel criteria, regarding water-based dispersion paintsformulated with vinyl acetate and ethylene modified copolymers, low emissions and low odour (zero-zero Voc), free of APEO,ammonium, formaldehyde and heavy metals, for interior use. DISPERLITH HYGIENIC forms a well-balanced film of paint thatis easy to apply, quick drying, with low odour that provides an excellent finish, in line with the DIN EN 13300 Standard, wetscrub resistance Class 2 (>260 ml/m²), covering Class 1, with a high level of water vapour transpiration, Class 1 (SD = 0.03),and water permeability, Class 1 (W = 0.9). Paint resistant to the most disinfectant cleaners according to Tests DIN EN ISO4628-2: 2004-01 by TÜV SÜD Germany and/or Fakolith R&D+i (For more security, before use, ask your case to our Tech.Department)Good adhesion, particularly on mineral or painted surfaces. Applicable at temperatures of 5ºC or over, up to a maximumrelative humidity of 75%. Available in white and other colours.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): DISPERLITH HYGIENIC is an intelligent sanitary paint,treated with BioFilmStop Inhibition Technology, highly resistant to biofilm and bacteria, ISO 22196:2011 (Escherichia coli,Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella enteritidis,Legionella pneumophila...). The paints of the Disperlith range positively contribute to compliance with (EC) 852/2004, aremanufactured subject to HACCP and GMP (EC) 2023/2006, also notably improving HACCP, food safety and asepsis for theuser company. Declaration of Conformity – Health Register FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

RECOMMENDED USE: DISPERLITH HYGIENIC is recommended as an interior finish paint for domestic interiors, particularlyfor walls and ceilings, both dry and in conventional damp or humid environments, such as bathrooms and kitchens, whethernew or in the process of renovation and restoration, can be used on practically any kind of dry, cured and consistent surface(plasterboard, plaster, previously painted surfaces, texturglas, etc.). For construction and civil engineering works, andcommunal areas in the food industry, health sector, public sector, or the pharmaceuticals and cosmetics industry in general.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application can take place atambient and surface temperatures as low as 5ºC. DISPERLITH HYGIENIC should be applied undiluted in two coats usingbrushes, rollers or airless spray guns. The surface must be clean, free of hygroscopic salts, microorganisms, etc. and, shouldsuch be required, must be duly primed. Do not apply the second until the first coat has lost its wet sheen and is dry to thetouch (in normal conditions, of around 20ºC with a humidity of around 60%, this will be in approx. 2-3 hours). Clean utensilsimmediately after use with water. For more information consult the specifications sheet and/or application guidelines, alongwith the safety sheet.


Date 28-02-2018 Page 18

DISPERLITH INDUSTRY

PROPERTIES: DISPERLITH INDUSTRY is a special water-based dispersion paint, formulated with 100% pure acrylates, lowemissions and low odour (Low Voc), free of APEO, ammonium, formaldehyde and heavy metals, highly resistant todampness/humidity, for interior and exterior use. DISPERLITH INDUSTRY forms a well-balanced film of paint that is easy toapply, quick drying, low odour and provides an excellent finish, in line with the DIN EN 13300 Standard, wet scrub resistanceClass 1, covering Class 1 (250 ml/m²), water vapour transpiration Class 2 (SD = 0.27), and water permeability Class 3 (W =0.08). Excellent adhesion on surfaces of all kinds, (direct tensile adhesion on glazed tiles 80-100 kg/cm² UNE-EN ISO4624-2002, Cross-cut test Class 1 UNE-EN ISO 2409:2007. Paint resistant to the most disinfectant cleaners according to TestsDIN EN ISO 4628-2: 2004-01 by TÜV SÜD Germany and/or Fakolith R&D+i. Highly resistant to surface carbonation andalkalinity. Applicable at temperatures of 5ºC or over and up to a maximum relative humidity of 75%. Available in white andother colours.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): DISPERLITH INDUSTRY is an intelligent sanitary paint,treated with BioFilmStop Inhibition, highly resistant to biofilm bacteria and mould, DIN-UNE EN 15457:2008 (Aspergillus,Cladosporium, Penicillium, Algae…), as well as bacteria, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillussubtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pneumophila...). The paints ofthe Disperlith range positively contribute to compliance with (EC) 852/2004, are manufactured subject to HACCP and GMP(EC) 2023/2006, also notably improving HACCP, food safety and asepsis for the user company. With Statement ofCompliance – Health Register FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

RECOMMENDED USE: DISPERLITH INDUSTRY is mainly recommended for ceilings and walls, interior or exterior, and iscompatible with most surfaces, duly primed, should such be required, and to cover well-adhered previous coats of dispersionor priming paints, resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. Particularly in severe industrial, climate orsanitary conditions, for the food industry, health sector, and pharmaceutical or cosmetics industry in general, constructionand civil engineering.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application can take place atambient and surface temperatures as low as 5ºC and up to a maximum relative humidity of 75%. Following adequatepreparation of the surface DISPERLITH INDUSTRY should be applied undiluted, in two coats, using brushes, rollers or airlessspray guns. The surface must be clean, free of hygroscopic salts, microorganisms, etc. and, should such be required, dulyprimed. Do not apply the second until the first coat has lost its wet sheen and is dry to the touch (in normal conditions, ofaround 20ºC with a humidity of around 60%, this will be in approx. 2-3 hours). Clean utensils immediately after use withwater. For more information consult the specifications sheet and/or application guidelines, along with the safety sheet.

AVERAGE YIELD: DISPERLITH INDUSTRY has a yield of approx. 4-5 m²/l, although this can vary considerably, depending onhow it is applied and the texture and absorption of the surface it is applied to.

Date 28-02-2018 Page 19

DISPERLITH ELASTIC

PROPERTIES: DISPERLITH ELASTIC is a special water-based dispersion paint, formulated with modified acrylates copolymers,low emissions and low odour (Low Voc), free of APEO, ammonium, formaldehyde and heavy metals, highly resistant todampness and humidity, for interior and exterior use. DISPERLITH ELASTIC forms a well-balanced and elastic film of paint,with a satin finish, that is easy to clean and disinfect, easy to apply and, quick drying, also at low temperatures, from 3ºC,with low odour and providing an excellent finish, in line with the DIN EN 13300 Standard, wet scrub resistance Class 1,covering Class 1 (>250 ml/m²), highly impermeable to water vapour, Class 3 (SD = 1.57), and water permeability Class 1 (W =0.03). Applicable at temperatures of 3ºC or over and up to a maximum relative humidity of 75%. DISPERLITH ELASTIC is apaint with (EC) UNE-EN 1504-2:2005 marking and that is highly resistant to Class 1 and 2 aggressive chemical attack, withtesting of the food simulants, along with the usual cleaning and disinfecting agents in their maximum recommendedsolutions, TECNALIA Report 050844 and Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜD Germany and/or Fakolith R&D+i (Formore security, before use, ask your case to our Tech. Department). Available in white and other colours.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): DISPERLITH ELASTIC is an intelligent sanitary paint,treated with BioFilmStop Inhibition, highly resistant to biofilm bacteria and mould, DIN-UNE EN 15457:2008 (Aspergillus,Cladosporium, Penicillium, Algae…), as well as bacteria, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillussubtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pneumophila...). The paints ofthe Disperlith range positively contribute to compliance with (EC) 852/2004, are manufactured subject to HACCP and GMP(EC) 2023/2006, also notably improving HACCP, food safety and asepsis for the user company. With Statement ofCompliance – Health Register FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

RECOMMENDED USE: DISPERLITH ELASTIC is designed for interior and exterior use, and is compatible with most surfaces,duly primed should, such be required, and to cover well-adhered previous coats of dispersion or priming paints, resistant tocross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. Its excellent covering and water-vapour barrier qualities mean that itfunctions as an excellent waterproofing film, particularly in severe industrial, climate or sanitary conditions, for the foodindustry, health sector, and pharmaceutical or cosmetics industry in general, construction and civil engineering (for contactwith foods in open areas use the version Disperlith FoodGrade Elastic).

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application can take place atambient and surface temperatures as low as 2-3ºC and up to a maximum relative humidity of 75%. Following adequatepreparation of the surface DISPERLITH ELASTIC should be applied undiluted, in two coats, using brushes, rollers or airlessspray guns. The surface must be clean, free of hygroscopic salts, microorganisms, etc. and, should such be required, dulyprimed. Do not apply the second until the first coat has lost its wet sheen and is dry to the touch (in normal conditions, ofaround 20ºC with a humidity of around 60%, this will be in approx. 2-3 hours). Clean utensils immediately after use withwater. For more information consult the specifications sheet and/or application guidelines, along with the safety sheet.


Date 28-02-2018 Page 20

FK-45 Hygienic Forte

DESCRIPTION: FAKOLITH FK-45 Hygienic Forte is a high-performance, two-component, Bisphenol A free, modified epoxysanitary paint, with a high solids content, low voc, low odour and EC marking, with higher physicochemical resistance andperformance than FK-45 FoodGrade. FK-45 Hygienic Forte is a FoodGrade epoxy paint that ensures limitation of migrations,generates a high-gloss impermeable film that is easy to clean and disinfect, with water at temperatures of up to 100ºC,highly resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. FK-45 FoodGrade Hygienic Forte is highly resistant toabrasion UNE EN ISO 5470-1:1999 and highly resistant to aggressive chemical attacks UNE EN 1504-2:2005 (chemicalscompatible for epoxy), with a UNE Shore hardness of 80±5 units, Shore D EN ISO 868:2003. (23±2ºC;50±5%Hr), coveringClass 1 (300 µm dry film) and damp rubbing Class 1, DIN EN 13300. Paint resistant to the most disinfectant cleaners accordingto Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜD Germany and/or Fakolith R&D+i (For more security, before use, ask yourcase to our Tech. Department). Available in the most frequent industrial colours (grey, green, red, blue, cream, yellow,black...) an now also in green and blue hospital.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): An intelligent sanitary paint, treated with BioFilmStopInhibition, highly resistant to biofilm bacteria and mould, DIN-UNE EN 15457:2008 (Aspergillus, Cladosporium, Penicillium,Algae…), as well as bacteria, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomasaeruginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pneumophila...). The paints of the Disperlith rangepositively contribute to compliance with (EC) 852/2004, are manufactured subject to HACCP and GMP (EC) 2023/2006, alsonotably improving HACCP, food safety and asepsis for the user company. With Statement of Compliance – Health RegisterFAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

BPA-FREE TECHNOLOGY: As an added value, FK-45 Hygienic Forte has been developed with BPA-free technology, it has beenformulated with epoxy resin free of Bisphenol A, component that has been prohibited in some countries.

RECOMMENDED USE: FK-45 Hygienic Forte sanitary epoxy paint is specifically formulated for the protection and finishing ofsurfaces where the highest levels of biological protection are required, along with high levels of physicochemical resistance,and is for application on skirting boards, floors walls and ceilings, objects, installations, structures, etc. located in interiors.Generally for use in the food industry, the health sector, the pharmaceuticals and cosmetics industry, construction and civilengineering.

HOW TO APPLY: Following adequate preparation of the surface and having confirmed the suitability of the environment,FK-45 FoodGrade Forte paint can be applied by brush or roller, or for finishes and optimum applications using AirMix typespraying equipment (Airless with air in spray gun and product heater, recommended equipment, Wagner Super Finish 23Plus). Slowly pour component A into component B (never the other way round), mix together gently using an electric mixer,for at least 2 minutes or until the components have blended completely together, and then leave to rest for 1 minute beforestarting to apply. When mixing always use complete batches of component A and component B, to avoid errors in the mixingratio. Carefully plan application, bearing in mind the possibly short pot-life of the mix. Can be applied over fibreglass nettingsystems in tanks and on floors mixed with non-slip quartz sand. Should it be necessary adjust the viscosity of the paint bythinning with 5-10% of special FoodGrade solvent, FK-45 Solvent OEM.

Date 28-02-2018 Page 21

ATTENTION TO THE CONDITIONS OF APPLICATION AND CURING: The drying times and the waiting time for the second coatdepend on the actual thickness of the layer, the temperature, the relative humidity and the ventilation. The ambienttemperature and the base temperature, as well as that of the paint should never be lower than + 10ºC or higher than 35ºC,and the relative humidity should not be higher than 70-75%. The surface temperature of the base to be painted shouldalways be at least 3 ° C above the dew point to avoid condensation. It is estimated that the ideal application temperature isaround 20ºC and 60% relative humidity. In the event that environmental conditions are not appropriate for its applicationand curing, these should be adapted with extraction and ventilation of air, either at room temperature, with cold or heat,with dehumidifiers, etc., until the environmental conditions are adequate and stable during the application and curing, andalways avoiding the generation of moisture condensation, since this would prevent the proper curing of the paint, especiallymade to monitor in tanks and confined spaces. Epoxy paint should not be in contact with water or surface condensationduring the first 72 hours of curing, or the paint may not cure properly, appearing "Amine Blush" wash spots. The paintingoffers good general resistance, at least after 72 hours of curing, although we recommend not to subject the paint film tosevere chemical-physical aggressions until it has been cured for at least 1 week (walls, floors, ceilings, indirect contact).

AVERAGE YIELD: according to recommended coat thickness, depending on use of FK-45 Hygienic Forte


Date 28-02-2018 Page 22

DISPERLITH POX

PROPERTIES: DISPERLITH POX is a two-component, water-based epoxy paint with CE Marking, formulated using specialepoxy resins, low emissions and low odour (Low Voc), free of APEO, ammonium, formaldehyde and heavy metals, waterproofhighly resistant to abrasion, dampness/humidity and the consequences thereof, for interior use. DISPERLITH POX forms awell-balanced film of paint, highly resistant to stains, easy to apply, quick drying, low odour and providing an excellent finish,in line with the DIN EN 13300 Standard, wet scrub resistance Class1 and coverage Class 1. Excellent adhesion on surfaces of allkinds. Highly resistant to surface carbonation and alkalinity. Applicable at temperatures as low as 2-3ºC and up to amaximum relative humidity of 75%. Paint resistant to the most disinfectant cleaners according to Tests DIN EN ISO 4628-2:2004-01 by TÜV SÜD Germany and/or Fakolith R&D+i (For more security, before use, ask your case to our Tech. Department).Available in white. For colours consult availability, orders must be for a minimum quantity.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): DISPERLITH POX is an intelligent sanitary paint, treatedwith BioFilmStop Inhibition, highly resistant to biofilm bacteria and mould, DIN-UNE EN 15457:2008 (Aspergillus,Cladosporium, Penicillium, Algae…), as well as bacteria, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillussubtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pneumophila...). The paints ofthe Disperlith range positively contribute to compliance with (EC) 852/2004, are manufactured subject to HACCP and GMP(EC) 2023/2006, also notably improving HACCP, food safety and asepsis for the user company. With Statement ofCompliance – Health Register FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

RECOMMENDED USE: DISPERLITH POX is mainly recommended for use on walls, ceilings and skirting boards, and iscompatible with most surfaces, duly primed should such be required, lacquer-finish sandwich panels, and to cover well-adhered previous coats of dispersion and/or priming paints. Resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007,the excellent qualities of this paint ensure that it functions as a hybrid, between a water-based dispersion and an epoxypaint, with improved physicochemical resistance, particularly in severe industrial, climate or sanitary conditions, for the foodindustry, health sector, and pharmaceutical or cosmetics industry in general, construction and civil engineering.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Apply DISPERLITH POX usingbrushes, rollers or airless spray guns. The surface must be clean, free of hygroscopic salts, microorganisms, etc. and, shouldsuch be required, duly primed. Following suitable preparation of the surface, slowly pour component A into component B(never the other way round), mix together gently using an electric mixer, for at least 2 minutes or until the components haveblended completely together, and then leave to rest for 1 minute before starting to apply. When mixing always use completebatches of component A and component B, to avoid errors in the mixing ratio. Drying times and the length of time you willhave to wait between coats will depend on the actual thickness of each coat, temperature, level of relative humidity andventilation. However, generally speaking you will not have to wait for more than 1-4 hours before applying a second coat.Clean utensils immediately after use with water. For more information consult the specifications sheet and/or applicationguidelines.


Date 28-02-2018 Page 23

RENOLITH FK-32

PROPERTIES: RENOLITH FK-32 is a special dispersion paint, with a high capacity for covering, based on dearomatised solvents,with 100% pure acrylates, low odour, free of APEO, ammonium, formaldehyde and heavy metals, highly resistant todampness and humidity, for interior use. RENOLITH FK-32 forms a well-balanced film of paint, highly resistant to stains, easyto apply, quick drying, low odour and providing an excellent finish, in line with the DIN EN 13300 Standard, wet scrubresistance Class 1 covering Class 2 (250 ml/m²), water vapour transpiration Class 1 (SD = 0.11) and water permeability Class 3(W = 0,04 ). Good adhesion, particularly on mineral or painted surfaces. Applicable at temperatures as low as 1ºC (free of iceand in dry atmospheres and surface conditions) and up to a maximum relative humidity of 75%. Available in white and othercolours, consult possibilities.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): RENOLITH FK-32 is an intelligent sanitary paint, treatedwith BioFilmStop Inhibition, highly resistant to biofilm bacteria and mould, DIN-UNE EN 15457:2008 (Aspergillus,Cladosporium, Penicillium, Algae…), as well as bacteria, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillussubtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pneumophila...). The paints ofthe Disperlith range positively contribute to compliance with (EC) 852/2004, are manufactured subject to HACCP and GMP(EC) 2023/2006, also notably improving HACCP, food safety and asepsis for the user company. With Statement ofCompliance – Health Register FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

RECOMMENDED USE: RENOLITH FK-32 is mainly recommended for use in the renovation of interior walls and ceilings thatsuffer from stain problems, where a rapid, low odour application is required. Compatible with most surfaces, duly primedshould such be required, and to cover well-adhered previous coats of dispersion or priming paints, resistant to cross-cut testClass 0-1 UNE-DIN EN ISO 2409:2007. Particularly recommended for use in severe industrial, climate or sanitary conditions,for the food industry, health sector, and pharmaceutical or cosmetics industry in general, construction and civil engineering.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application can take place atambient and surface temperatures as low as 2-3ºC and up to a maximum relative humidity of 75%. RENOLITH FK-32 shouldbe applied undiluted, in two coats, using brushes, rollers or airless spray guns. The surface must be clean, free of hygroscopicsalts, microorganisms, etc. and, should such be required, duly primed. Do not apply the second until the first coat has lost itswet sheen and is dry to the touch (in normal conditions, of around 20ºC with a humidity of around 60%, this will be inapprox. 2-3 hours). The cleaning of utensils, or thinning if required, can be done using FK-37 dearomatised solvent. For moreinformation consult the specifications sheet and/or application guidelines, and the safety sheet.


Date 28-02-2018 Page 24

Documents

DISPERLITH FoodGrade Elastic - FAKOLITH · DISPERLITH FoodGrade Elastic ... minutes or until the components have blended completely together, and then leave to rest for 1 minute before