Upload
dangkien
View
213
Download
0
Embed Size (px)
Citation preview
DISCOVERYDAYS 2018
Today’s technologies, tomorrow’s solutions: A converter‘s, recycler‘s & brand owner‘s perspective.
The EREMA Event for Plastics Recycling & the Circular Economy.
The
27-29 June 2018 Ansfelden, Austria
Programme
THU28
WED FRI27 29
TOMORROW‘S SOLUTIONS
TODAY‘S TECHNOLOGIES
TODAY‘S TECHNOLOGIES
In collaboration with:
DIS
CO
VER
Y
DAYS
2018
POST CONSUMER RECYCLING
THE RECYCLER‘S PERSPECTIVE
Lighthouse projects & creative end products
PRODUCTION WASTE
RECYCLING THE CONVERTER‘S PERSPECTIVE
CIRCULAR ECONOMY
THE PLASTICS INDUSTRY‘S
PERSPECTIVE
JUNE JUNEJUNE
Lighthouse projects & best practice examples
The circular economy is the order of the day. And one of the big issues for the plastics and recycling indus-
try of the future. In order for the circular economy to be successful on a widespread basis and to unleash its full
potential we as plastics industry have to question a number of things and take a new approach. The future calls
for innovative ideas and concepts – ones that span processes, companies and industries. But we don‘t have to
reinvent everything. Because we already have effective solutions, effective technologies and creative (recycled)
products in many areas.
We aim to take a look at both levels at the EREMA DISCOVERY DAYS 2018 and journey into the future together
with you and notable experts to identify and discuss possible requirements for you and the industry. Plus, we
will put the spotlight on current best practice examples, lighthouse projects and technologies which are already
taking effect and ensure a strong performance for you – the focus is on solutions for post-consumer
recyclers and production waste recyclers.
We are convinced that the circular economy is a trigger for cooperation and collaboration. And this is
why it is a pleasure for us to hold this event together with notable partners and key players in the plastics value
chain. We invite you to acquire leading knowledge and come to the EREMA DISCOVERY DAYS 2018. Join us
on the journey! We look forward to your visit!
Your EREMA team
In collaboration with:
www.erema.com/en/discovery-days-2018/
Be part of it!
Registernow!
08.00 Organised transfer with shuttle bus from the recommended hotels to EREMA
08.30 Welcome reception and registration at EREMA
09.00Official opening of the EREMA Discovery Days 2018
EREMA Management
SESSION: State-of-the-art recycling for supermarket film & shrink-wrap film
09.10 – 09.35Presentation SAICA Nature Cycle
Luis Pellejer, Director SAICA NATUR CYCLE PLUS
09.35 – 09.55Performance factors in supermarket film recycling – Question & answer
with the speakers and experts from EREMA on stage
SESSION: Spotlight on recycled products from Henkel
09.55 – 10.20Driving Circular Economy of Laundry & Home Care Packaging
Thorsten Leopold, Head of International Packaging Development Home Care, Henkel AG & Co. KGaA Düsseldorf
10.20 – 10.40Performance factors in packaging recycling – Question & answer
with the speakers and experts from EREMA on stage
10.40 – 11.00 Coffee break
DAY 1 | Wednesday, 27 June POST-CONSUMER RECYCLING THE RECYCLER‘S PERSPECTIVE
SESSION: Think big! Large scale “recycling eco-systems”
11.00 – 11.25From Waste to Plastics. How a waste incinerating company makes steps forward
Berry Bellert, Manager Kunststoffen Attero
11.25 – 11.45Performance factors in household waste recycling – Question & answer
with the speakers and experts from EREMA on stage
11.45 – 12.15
Wrap up & EREMA company news
Gerold Breuer, Head of Marketing & Business Development, EREMA Group GmbH
• POWERFIL: EREMA´s business unit for filtration: Robert Obermayr, Head of Business Unit Powerfil
• ReFresher: EREMA´s high-efficiency anti-odour technology
• Spare Parts Online: new EREMA Webshop
• QualityOn: EREMA´s online measurement systems
• re360: on the way to smart factories & made to measure repellets
• Network is key: information about exhibition and trial runs in the afternoon
12.15 – 13.15 Lunch
12.15 – 15.00
EXHIBITION 01 | Parallel exhibition with key players from the entire plastics value chain
EXHIBITION 02 | EREMA: CAREFORMANCE – We care about your performance
for details, please see section „EXHIBITIONS“ at the end of this programme
DAY 1 | Wednesday, 27 June POST-CONSUMER RECYCLING THE RECYCLER‘S PERSPECTIVE
DAY 1 | Wednesday, 27 June POST-CONSUMER RECYCLING THE RECYCLER‘S PERSPECTIVE
13.30 – 15.00MACHINE DEMONSTRATIONS | POST-CONSUMER RECYCLING live in operation
Latest recycling technology of EREMA and partners
14.00 Conclusion of the event
from 15.00 on Organised transfer with shuttle bus from EREMA to the recommended hotels
DAY 1 | Wednesday, 27 June GALA EVENING
Gala evening: “Circularity: a business imperative”
at the EREMA Customer Centre
18.30 Organised transfer with shuttle bus from the recommended hotels to EREMA
19.00 Come together
Opening speech
Manfred Hackl, CEO EREMA Group
Key note speech – Circular Economy: a virgin polyolefin producer’s vision
Günter Stephan, Head of Circular Economy Solutions, Borealis
Gala dinner, music & show act
22.00 Organised transfer with shuttle bus from EREMA to the recommended hotels
08.00 Organised transfer with shuttle bus from the recommended hotels to EREMA
08.30 Welcome reception and registration at EREMA
09.00 – 09.15Welcome & impressions from day 1
Gerold Breuer, Head of Marketing & Business Development, EREMA Group GmbH
09.15 – 09.40Key note speech: Plastics for life
Axel Kühner, CEO Greiner Group
09.45 – 10.05 Plastics Recycling: The current status in Europe – advocacy & initiatives
Antonino Furfari, Managing Director Plastics Recyclers Europe
10.05 – 10.45
Discussion panel:
Circular economy and raw material producers – parallel worlds or a complementary concept?
Panel: representatives of Borealis, Braskem, ExxonMobil, INEOS, and more
DAY 2 | Thursday, 28 June CIRCULAR ECONOMY THE PLASTICS INDUSTRY‘S PERSPECTIVE
10.45 – 11.05 Coffee break
11.05 – 11.25Lighthouse project from USA: S.C. Johnson shows the recycling process of curbside film
Speaker from S.C. Johnson
11.30 – 12.00
Session: Fit for recycling in injection moulding
Presentation ENGEL:
iQ weight control intelligent process fluctuation compensation
Univ.-Prof. DI Dr. Georg Steinbichler, Head of Institute of Polymer Injection Moulding and Process Automation at the
Johannes Kepler University in Linz and Vice President of R&D Technology at ENGEL AUSTRIA GmbH
Presentation Haidlmair:
FDU Flat Die Unit – special hotrunner system for recycling plastics
Andreas Kißler, FDU-Manager, Haidlmair GmbH
12.05 – 12.25
LIT factory – research factory for lightweight engineering, recycling and recompounding
Univ.-Prof. DI Dr. Jürgen Miethlinger, MBA, Head of Institute of Polymer Extrusion & Compounding, JKU, Linz
Christoph Burgstaller, CEO TCKT – Transfercenter für Kunststofftechnik GmbH
12.30 – 12.40KEYCYCLE – EREMA plant engineering
Michal Prochazka, Head of EREMA Business Unit KEYCYCLE
12.40 – 12.50Wrap up & information about the afternoon
Gerold Breuer, Head of Marketing & Business Development, EREMA Group GmbH
DAY 2 | Thursday, 28 June CIRCULAR ECONOMY THE PLASTICS INDUSTRY‘S PERSPECTIVE
12.50 – 14.00 Lunch
12.50 – 15.00
EXHIBITION 01 | Parallel exhibition with key players from the entire plastics value chain
EXHIBITION 02 | EREMA: CAREFORMANCE – We care about your performance
for details, please see section „EXHIBITIONS“ at the end of this programme
13.30 – 15.00MACHINE DEMONSTRATIONS | RECYCLING live in operation
Latest recycling technology of EREMA, injection moulding processing of recyclates
DAY 2 | Thursday, 28 June CIRCULAR ECONOMY THE PLASTICS INDUSTRY‘S PERSPECTIVE
Departure
13.45
Science walk through the Borealis Innovation Headquarters in Linz
Organized transfer to Borealis and back to the recommended hotels
Departure and meeting point: Front Office EREMA headquarters
Departure
13.45
Site visit: Greiner Packaging in Kremsmünster – company tour
Organized transfer to Greiner Packaging and back to the recommended hotels
Departure and meeting point: Front Office EREMA headquarters
from 15.00 on Organised transfer with shuttle bus from EREMA to the recommended hotels
08.00 Organised transfer with shuttle bus from the recommended hotels to EREMA
08.30 Welcome reception and registration at EREMA
09.00 – 09.15Welcome & impressions from day 1 & 2
Gerold Breuer, Head of Marketing & Business Development, EREMA Group GmbH
09.15 – 09.40Greiner Bio-One’s plastic reuse concept, based on production waste recycling
Harald Zodl, Senior Project Manager, Greiner Bio-One International GmbH
09.40 – 10.00Efficient castfilm lines for hygiene films
Martin Kaltenecker, Head of Sales, SML Maschinen Gesellschaft mbH
10.00 – 10.20State of the art biax-film production
Peter Bielansky, Process Engineering / Product Management, Brückner Maschinenbau GmbH & Co. KG
10.20 – 10.40 Coffee break
10.40 – 11.00Business case: ISEC evo adapts ideally to scrap logistics
Manfred Dobersberger, CEO PureLoop GmbH
11.00 – 11.30Performance factors for production waste recycling – Question & answer
with the speakers and experts from EREMA on stage
DAY 3 | Friday, 29 June PRODUCTION WASTE RECYCLING THE CONVERTER‘S PERSPECTIVE
DAY 3 | Friday, 29 June PRODUCTION WASTE RECYCLING THE CONVERTER‘S PERSPECTIVE
14.00 Conclusion of the event at the EREMA Customer Centre
from 14.15 on Organised transfer with shuttle bus from EREMA to the recommended hotels
11.45 – 13.00 Lunch
12.50 – 14.00
EXHIBITION 01 | Parallel exhibition with key players from the entire plastics value chain
EXHIBITION 02 | EREMA: CAREFORMANCE – We care about your performance
for details, please see section „EXHIBITIONS“ at the end of this programme
12.30 – 14.00MACHINE DEMONSTRATIONS | Production waste recycling live in operation
Latest recycling technology of EREMA, PURE LOOP and partners
11.30 – 11.45Wrap up & information about the afternoon
Gerold Breuer, Head of Marketing & Business Development, EREMA Group GmbH
DAY 1 – Day 3 Wednesday, 27 to Friday, 29 June EXHIBITIONS
EXHIBITION 01 | Key players from the entire plastics value chain
• Sorting, pretreatment & washing equipment
• Downstream equipment
• Plastic converting machinery
• Melt filter producers
• Universities, laboratories & associations
• Info corner: re360360 degree overview – in real time. The new Manufacturing Execution System from EREMA
• Info corner: EREMA Spare Parts Online Order easily, quickly and safely in the webshop!
• Exhibition with products made of recyclate Innovative solutions from different manufacturers show that products made of recyclate are not only in the interest of the environment but are also practical and offer attractive designs.
• EREMA Quality Corner EREMA quality testing laboratory & online measurement systems: Quality On:Colour and QualityOn:MVR
EXHIBITION 02 | EREMA: CAREFORMANCE – We care about your performance