Disclaimer

Page 2

DisclaimerThis presentation has been prepared by Inca Minerals Limited (ICG). The information contained in this presentation is a professional opinion only and is given in good faith. Certain information in this document has been derived from third parties and though ICG has no reason to believe that it is not accurate, reliable or complete, it has not been independently audited or verified by ICG. Any forward-looking statements included in this document involve subjective judgment and analysis and are subject to uncertainties, risks and contingencies, many of which are outside the control of, and may be unknown to, ICG. In particular, they speak only as of the date of this document, they assume the success of ICG’s strategies, and they are subject to significant regulatory, business, competitive and economic uncertainties and risks. Actual future events may vary materially from the forward-looking statements and the assumptions on which the forward-looking statements are based. Recipients of this document (Recipients) are cautioned to not place undue reliance on such forward-looking statements. ICG makes no representation or warranty as to the accuracy, reliability or completeness of information in this document and does not take responsibility for updating any information or correcting any error or omission which may become apparent after this document has been issued. To the extent permitted by law, ICG and its officers, employees, related bodies corporate and agents (Agents) disclaim all liability, direct, indirect or consequential (and whether or not arising out of the negligence, default or lack of care of ICG and/or any of its Agents) for any loss or damage suffered by a Recipient or other persons arising out of, or in connection with, any use or reliance on this presentation or information. This presentation is not an offer, invitation, solicitation or recommendation with respect to the subscription for, purchase or sale of any security, and neither this presentation nor anything in it shall form the basis for any contract or commitment whatsoever.All amounts in Australian dollars unless stated otherwise.

Competent Person’s StatementThe assessment of information provided by third parties, subsequently presented in this presentation relating to Project Potential, past Exploration Results, Mineral Resources and/or Ore Reserves are the views of Mr R Brown, who is a Director the Company and a Member of the Australasian Institute of Mining and Metallurgy. Mr R Brown is a Competent Person as defined in the 2004 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr R Brown consents to the inclusion in the presentation of his views of information provided by third parties, in the form and context in which it appears.

3

Recap on 2011-2013

Page 3

2011 “Recognised porphyry potential”• Recognised porphyry potential of Chanape

(previously considered poly-metallic vein project)

2012 “Confirmed porphyry model”• Acquired geo-physics data covering Chanape• Re-logged previous drilling confirming occurrence of

porphyry system at Chanape• Assayed previous core confirming widespread gold

mineralisation in breccia pipes at Chanape

2013 “Discovered mineralised porphyry”• Drilled maiden hole (CH-DDH001) into mineralised

porphyry• World expert opinion confirms prospectivity of

Chanape• Completed surface exploration generating

epithermal and porphyry drill targets DRILLING HAS COMMENCED

4

2013 - External Validation

Consultation with world experts leads to project validation and heightened development strategy• Confirmation of porphyry

potential: A Toromocho look-alike (A Chinalco development 30km to NE)

• Confirmation of epithermal gold potential: Widespread gold in rock chip sampling and in drill holes

• Confirmation of size potential: SP anomaly (2.5km x 1km) defines potential extent of porphyry mineralisation

• Recommendation: Commit to detailed surface exploration program to de-risk future drilling PHASE 1 AND PHASE 2 COMPLETED

Page 4

Jeffrey Hedenquist

visits Chanape

5

Chanape - Dual Targets

Epithermal Au-Ag Mineralisation

associated with breccia-bodies and other altered

rocks “Yanacocha-style”Porphyry Cu-Mo-

Ag+/-Au Mineralisation associated with

porphyry intrusives, skarns and breccias

“Toromocho-style”

Two forms of related mineralisation provide dual resource potential

Page 5

(not strictly to scale)

Chanape schematic geological NS cross-section

6

2013/14 - Chanape Time Line

Page 6

Activity 2013 Q2

2013 Q3

2013 Q4

2014 Q1

New Drill Permitting Phase 1 & 2* compiled submitted

Surface Exploration P1 completed

Surface Exploration P2 completed completed

Drilling P1 (epithermal mineralisatn) commenced

Drilling P2 (epi/porphyry mineralisatn)* Drilling can commence under existing drilling permit

7

2013 Q2 Surface Exploration

Low cost surface exploration to de-risk drilling Phase 1:• Alteration mapping,

geochemical sampling and ground magnetics

• Identification of near-surface gold, silver, copper mineralisation

• Phase 1 drill target generationCOMPLETED

Phase 2:• Alteration mapping,

geochemical sampling and IP• Identification and classification

of breccias• Phase 2 drill target generation• Flow on from Phase 1

COMPLETED Page 7

Phase 3 Area (remainder of project area) Mapping and sampling scheduled for Q3 2013 – Q1 2014

Phase 1 Area

Phase 2 Area

8Page 8

Q2 Phase 1 Surface Exploration

Phase 1 Results:• Six broad geochemical anomalies define

broad epithermal target zones at Chanape

• Significant rockchip results include: • Sample 298: 18.95g/t Au, 15g/t

Ag • Sample 341: 14.05g/t Au, 152g/t

Ag• Sample 268: 7.05g/t Au, 8.76g/t

Ag• Sample 208: 6.81g/t Au,

14.65g/t Ag • Sample 320: 2.24g/t Au, 50.3g/t Ag • Sample 157: 1.39g/t Au, 13.45g/t Ag • Sample 325: 1.2g/t Au, 13.45g/t Ag

• 17 breccia pipes and 21 breccia structures discovered in P1 phase

14.05g/t Au, 152g/t Ag

18.95g/t Au, 15g/t Ag

7.05g/t Au, 8.76g/t Ag

Drill result: CH-DDH001100m @ 2.0g/t Au, 41.0g/t Ag 6.81g/t Au,

14.65g/t Ag1.39g/t Au, 13.45g/t Ag2.24g/t Au, 50.3g/t

Ag

1.2g/t Au, 13.45g/t Ag Drill result: CH12

200m @ 0.71g/t Au, 5.34g/t Ag

9Page 9

Q2 Phase 2 Surface Exploration

Phase 2 Results:• Additional six broad geochemical

anomalies define broad porphyry target zones at Chanape

• Significant rockchip results include: • Sample 733: 31.60 g/t Au, 682g/t Ag,

0.52% Cu• Sample 753: 19.45g/t Au, 788g/t Ag,


4.65% Pb• Sample 341: 14.05g/t Au, 152g/t Ag,


0.22% Cu • Sample 457: 5.46g/t Au, 649g/t Ag, 1.14%

Pb• Sample 735: 4.62g/t Au, 31.40g/t Ag

• 28 breccia pipes and 7 breccia structures discovered in P2 phase PROJECT TOTAL OF 73 TO DATE – UP FROM 50 KNOWN

• Large near-surface geophysics anomaly coincides with mineralised breccia and mineralised porphyry

753: 19.45g/t Au 736: 1.08g/t Au

735: 4.62g/t Au

725: 1.22g/t Au 341: 14.05g/t Au

726: 1.86g/t Au

733: 31.60g/t Au

743: 13.75g/t Au

521: 19.35g/t Au 815: 1.01g/t Au

548: 2.23g/t Au 529: 2.12g/t Au

457: 5.46g/t Au

298: 18.95g/t Au

268: 7.05g/t Au

320: 2.24g/t Au 208: 6.81g/t Au

328: 1.22g/t Au

157: 1.39g/t Au

325: 1.22g/t Au

RCS9: 11.25g/t Au Au

Phase 2 Sampling (2013)

Phase 1 Sampling (2013)

Pre-Phase 1 Sampling (2012)

10

2013 Q3/Q4 Drilling Program

Page 10

Drilling Phase 1• Shallow angled holes

into Au-Ag targets• Develop epithermal

Au-Ag “near-surface” resource

Drilling Phase 2• Deep angled holes

through epithermal “tops” into porphyry [geophysics] targets at depth

• Begin defining extent of underlying Cu-Mo-Ag-[Au]

Hypothetical Phase 2 Drilling

Hypothetical Phase 1 Drilling

11

Phase 1 Drilling Targets

Page 11

Multiple epithermal targets generated

Example of epithermal drill

target

• Quality targets generated • Targets based on coincident geology,

geophysics and geochemistry• 13 priority holes planned ALREADY

COMMENCED

Coincident: gold, copper, magnetic low

12Page 12

Multiple porphyry targets generated


• Quality targets close to the surface and open at depth

• Targets based on coincident geophysics (chargeability, resistivity and magnetics)

• Coincident geochemistry (characteristic molybdenum halo)

• 4 priority holes designed to test epithermal/porphyry

13Page 13

Example of porphyry drill targeting


Large chargeability anomaly , close to the

surface with surface gold and molybdenum

Anomaly more than 1.5km across

14

Inca – Why Invest

Inca – Value through discovery

Dual potential at Chanape – near-surface epithermal gold and silver AND porphyry copper, molybdenum, silver and gold beneath

De-risked drilling with world class upside potential Attractive portfolio of assets in Peru and Australia Management/world expert opinion proving

exploration model Generating interest from global producers

Page 14

Documents

Disclaimer