31
Last Date: 18.07.2014 S.No. Timing: 10.00 AM to 4.30 PM Directorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No. 0172-2740674) PROSPECTUS For admission to Government Industrial Training Institute, Sector 28-C, Chandigarh, Ph. No. 0172-2679016 & Government Industrial Training Institute for Women, Sector 11-C, Chandigarh, Ph. No. 0172-2740250 Session 2014-2015 Issued under the authority of Secretary, Technical Education, Chandigarh Administration Chandigarh. Instructions: (i) Candidates are advised to study the prospectus carefully before applying for admission. (ii) The prospectus is subject to any alteration and modification without notice. (iii) This is for information only and does not constitute a legal document. (iv) Prospectus will be available at both the institutes and the forms complete in all respect can be deposited in any institute. Price: Rs. 100/- at the counter : Rs. 130/- by Registered post

Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

  • Upload
    vananh

  • View
    231

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

Last Date: 18.07.2014 S.No. Timing: 10.00 AM to 4.30 PM

Directorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh

(Ph. No. 0172-2740674)

PROSPECTUS

For admission to

Government Industrial Training Institute,

Sector 28-C, Chandigarh, Ph. No. 0172-2679016

&

Government Industrial Training Institute for Women,

Sector 11-C, Chandigarh, Ph. No. 0172-2740250

Session 2014-2015

Issued under the authority of Secretary, Technical Education, Chandigarh Administration

Chandigarh.

Instructions:

(i) Candidates are advised to study the prospectus carefully before applying for

admission.

(ii) The prospectus is subject to any alteration and modification without notice.

(iii) This is for information only and does not constitute a legal document.

(iv) Prospectus will be available at both the institutes and the forms complete in all

respect can be deposited in any institute.

Price: Rs. 100/- at the counter

: Rs. 130/- by Registered post

Page 2: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

COUNSELLING SCHEDULE Venue :- G.I.T.I. Sector 28C Chandigarh Last Date:11.07.2014

DATE/DAY TIME CATEGORY

30.07.2014 Wednesday

UT POOL MATRIC

Above 55%

9.30 am General Category + Supernumerary + Women Category

31.07.2014 Thursday

UT POOL MATRIC

All %age

9.30 am General Category + Supernumerary + Women Category

01.08.2014 Friday

UT POOL MATRIC

9.30 am

Reserved Categories

(SC, PWD, DEF, FF, Sports, EWS)

04.08.2014 Monday

UT POOL MATRIC

9.30 am

Reserved Categories

(OBC only)

05.08.2014

MIDDLE UT POOL

All %age

9.30 am General Category + Supernumerary + Women Category

06.08.2014

MIDDLE UT POOL

9.30 am

All Reserved Categories

07.08.2014

GENERAL POOL

MATRIC & MIDDLE

All %age

9.30 am

All Categories (Matric)

2:30 pm All Categories (Middle)

14.08.2014

9.30 am

All Vacant Seats of UT Pool

2:30 pm All Vacant Seats of General Pool

Note : (IMPORTANT INSTRUCTIONS FOR THE CANDIDATES):

1. No separate letters will be sent to the candidates for counseling. Candidates should report

15 minutes before the prescribed time and if any candidate does not report on the

schedule date and time of counseling, his/her candidature will debarred.

2. The admission will strictly will be made on merit i.e. on the basis of marks obtained in

the entry qualification of each trade mentioned in the prospectus.

3. Original certificates and testimonials and fees will be required at the time of

interview. Candidates without the same will not be interviewed and their seat will be

offered to the next candidates in order of merit.

4. Admitted candidates will have to report to the respective class In-charges immediately

after the admission and in the event a trainees fails to report or is absent for four

consecutive days from the days of admission (without information) is deemed to have not

accepted the admission and in such case the same seat will be offered to the other

deserving candidates on the last date of counseling against vacant seats in order of merit.

5. The procedure of submitting the application form and fee structure is given in the

prospectus.

6. Candidates seeking admission in trades with different entry qualification should fill other

forms only.

7. The seats remaining vacant even after last date of admission will be filled on first

come first serve basis up to 19.08.2014.

Page 3: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

ACKNOWLEDGEMENT

1. Your application for admission to the Courses at Govt. Industrial Training

Institutes Chandigarh has been received and entered at Serial No.__________

Dated_____________ in the register.

2. In all future correspondence with this office you should quote the Serial No.

mentioned above with your percentage and total number of marks on

the aggregate.

For Admission Incharge,

Centralized Admission Committee

GITI & GITI (W), Chandigarh

(Please bring the prospectus while submitting Application form and on the day of

counseling)

Page 4: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

ABOUT DIRECTORATE OF TECHNICAL EDUCATION,

UNION TERRITORY, CHANDIGARH

Directorate of Technical Education, Union Territory, Chandigarh

PEC University of Technology Campus,

Sector 12, Chandigarh-160012

Tel. No. +91-0172-2740674, Fax No. 0172-2740678

The Directorate of Technical Education was set up on the

formation of Union Territory, Chandigarh in November, 1966.

This Directorate is headed by Sh. Sandeep Hans, PCS, as Joint

Secretary and Director Technical Education. Two Govt.

Industrial Training Institutes viz; Govt. Industrial Training

Institute, Sector 28 C, Chandigarh and Govt. Industrial Training

Institute for Women, Sector 11C, Chandigarh are running under

Aegis of Directorate of Technical Education, UT, Chandigarh.

Both these institutes cater to the vast manpower requirements of

industry in Chandigarh and neighboring states.

Page 5: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

LIST OF COURSES, DURATION AND QUALIFICATIONS FOR ADMISSION:

ENGINEERING TRADES:

S.

No.

Name of the Trade Semester

(6 months

each)

Units Qualification

1. Plumber Two One Passed 8th

class.

2. Carpenter Two One Passed 8th

class.

3. Welder Two One Passed 8th

class.

4. Automobiles Centre

of Excellence

(1 year + 6+6

months)

Six Passed 10th

class under 10+2 system

5. Fitter Four Three Passed 10th

class.

6. Machinist Four Two Passed 10th

class.

7. Turner Four Two Passed 10th

class.

8. Electrician Four Two Passed 10th

class.

9. Instrument Mechanic Four Two Passed 10th

class.

10. Mechanic Refrigeration &

Air Conditioning

Four Two Passed 10th

class..

11. Draughtsman Civil Four One Passed 10th

class.

12. Electronic Mechanic Four Two Passed 10th

class.

13. Tool & Die Maker PTJ&F* Four One Passed 10th

class.

14. Draughtsman Mechanical* Four One Passed 10th

class.

15. ITESM * Four One Passed 10th

class.

16. Machinist Grinder* Four One Passed 10th

class.

NON-ENGINEERING TRADES :

S.

No.

Name if the Trade Semesters

(6 months

each)

Units Qualifications

1. Computer Operator &

Programming Assistant

Two Three Passed 10th

class.

2. Stenography English Two Three Passed 10th

class.

3. Stenography Hindi Two Two Passed 10th

class with Hindi as

compulsory subject.

4. Stenography Punjabi Annual Exam One Passed 10th

class

5. Hair and Skin Care Two Two Passed 10th

class.

6. Dress Making Two Two** Passed 10th

class.

7. Human Resources

Executive

Two Two** Passed 10th

class.

8. Finance Executive Two Two** Passed 10th

class.

9. Marketing Executive Two Two** Passed 10th

class.

10. Cutting & Sewing Two Five Passed 8th

class .

11. Embroidery & Needle

Work

Two Two Passed 8th

class .

Weightage of 3 credit points will be given to the NCC ‘A’ Certificate holders.

* NOTE: There will be no admission in Tool & Die Maker, Draughtsman Mechanical,

ITESM and Machinist Grinder trades during this session.

** Admission to Human Resources Executive, Finance Executive, Marketing Executive and one

additional unit in Dress Making will be made only after affiliation with NCVT (National Council for

Vocational Trades) based on accreditation by QCI (Quality Council of India).

Page 6: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

SANCTIONED INTAKE CAPACITY AND RESERVATION AT GOVT. I.T.I SECTOR 28 C, CHANDIGARH

*One additional seat in each trade over in above sectioned strength in General Pool will be given to Kashmiri Migrants.

UT Pool for Chandigarh: 292 (85%) General Pool for other states: 52 seats (15%) S.

No

Name of Course Sanctioned

seats

Open

Seats

SC

(15%)

Depe

nden

ts of

defen

ce

perso

nal

(5%)

P

W

D

(3%)

FF

(2%)

S

P

O

R

T

S

(2%)

WOMEN

(30%)

O

B

C

(27%)

Supernumerar

y

30%

Open

Seats

SC

(15%)

ST

(5%)

Dependen

ts of

defence

personnel

(5%)

PWD

(3%)

Children

freedom

fighter

(2%)

W

O

M

E

N

(30%)

O

B

C

(27%)

S

P

O

R

T

S

(2%)

Supernumerary

(30%)

Fee

Waver

Full

fee Full

Fee

EWS

Fee

Waver

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

10th

based Trades

1. Steno English 16 2 2 1 1 - - 2 2 4 4 - - - - - - - 1 1 - 1

2. Steno Hindi 16 2 2 - - 1 - 2 2 4 4 - - - 1 - 1 - - 1 - 1

3. Automobile 96 12 13 4 2 2 2 - 25 22 21 4 1 2 1 1 - - 4 4 1 4

4. Electronics 16 3 2 - 1 - - 1 4 4 3 1 - - - - - - 1 - - 1

5. Electrician 16 3 2 1 1 - - - 4 3 3 1 1 - - - - - - 1 - 1

6. Fitter 32 3 5 2 - 2 1 - 8 8 8 - - - - - 1 - 2 - - 2

7 Draughtsman

Civil 16 3 2 1 1 - 1 1 3 3 3 1 - - - - - - - 1 - -

8. Instrument

Mechanic 16 3 2 1 - - - - 4 4 3 1 1 1 - - - - - - - -

9. Mech. Ref. & AC 16 3 2 - - - 1 - 4 4 4 - - 1 - - - - 1 - - 1

10. Turner 12 1 1 - - - - - 3 3 3 - - 1 - 1 - - 1 1 - 1

11. Machinist 12 1 1 - - - - - 3 3 2 1 - 1 1 - - - 1 1 - 1

12. COPA 20 3 3 1 2 - - 1 4 4 4 1 - - - - - - 1 1 - 1

8th

based Trades

13. Welder 12 1 1 1 - - 1 - 3 2 3 - - - - 1 - 1 1 - - -

14. Carpenter 16 2 2 1 - - - - 4 3 3 1 1 1 - - - - 1 1 - -

15. Plumber 16 2 2 1 - - - - 4 4 4 1 1 1 - - - - - 1 - -

16. Cutting & Sewing 16 3 2 - 1 - - 1 3 4 3 1 - - - - - - 1 1 - 1

TOTAL 344 47 44 14 9 5 6 8 80 79 75 13 5 8 3 3 2 1 15 14 1 15

Page 7: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

SANCTIONED INTAKE CAPACITY AND RESERVATION AT GOVT. I.T.I (WOMEN), SECTOR 11- C, CHANDIGARH

Name of Course Total

Sanc-

tioned

Seats

in all

the

trades

Total

Seats

Sanct-

ioned

under

U.T.

Quota

85%

Union Territory Pool for Chandigarh

(85% Seats)

Total

Seats

Sanc-

tioned

under

General

Quota

15%

General Pool for Other States

(15% Seats)

Total

Super

-

nume

rary

Seats

30%

Division of Total

30%

Supernumerary

Seats

OBC

27%

SC

15%

Dep. Of

Defence

5%

Handi-

capped

3%

F.F.

2%

Sports

2%

Open OB

C

27

%

SC

15

%

ST

5

%

Dep.

Of

Defen

ce 5%

Handi

-

cappe

d 3%

F.

F.

2

%

Ope

n

Super-

nume

rary

Seats

UT

Pool

85%

Super-

numera

ry Seats

General

Pool

15%

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Cutting & sewing 64 54 14 08 03 02 01 01 25 10 03 02 01 01 -- -- 03 19 16 03

Embroidery & Needle Work 32 27 07 04 01 01 01 01 12 05 01 01 -- -- -- -- 03 10 09 01

Dress Making *32 27 07 04 01 01 01 01 12 05 01 01 -- -- -- -- 03 10 09 01

Stenography ‘English’ 32 27 07 04 01 01 01 01 12 05 01 01 -- -- -- -- 03 10 09 01

Stenography ‘Hindi’ 16 14 04 02 01 -- -- -- 07 02 01 -- -- -- -- -- 01 05 04 01

Stenography ‘Punjabi’ 16 14 04 02 01 -- -- -- 07 02 01 -- -- -- -- -- 01 05 04 01

Computer Operator &

Programming Assistant

40 34 09 05 02 01 01 01 15 06 02 01 -- -- -- -- 03 12 10 02

Hair & Skin Care 32 27 07 04 01 01 01 01 12 05 01 01 -- -- -- -- 03 10 09 01

*Human Resources Executive 40 34 09 05 02 01 01 01 15 06 02 01 -- -- -- -- 03 12 10 02

*Finance Executive 40 34 09 05 02 01 01 01 15 06 02 01 -- -- -- -- 03 12 10 02

*Marketing Executive 40 34 09 05 02 01 01 01 15 06 02 01 -- -- -- -- 03 12 10 02

Total 384 326 86 48 17 10 09 09 147 58 17 10 01 01 -- -- 29 117 100 17

Note: 1. Admission to the trade of Stenography Punjabi will be made under State Scheme for which the Examination will be conducted at State Level and Certificates will be issued by the U.T.

Chandigarh Administration.

2. One additional seat will be available for Kashmir Migrants in addition to merit quota.

*3. Admission to Human Resources Executive, Finance Executive, Marketing Executive and one additional unit in Dress Making will be made only after affiliation with NCVT

(National Council for Vocational Trades) based on accreditation by QCI (Quality Council of India)

Page 8: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

RESERVATION OF SEATS IN ADMISSION: 85% seats of the total sanctioned intake of the

institute will be filled up from amongst the Trainees who pass their qualifying examination from

School/College recognized by Chandigarh Administration and situated in the Union Territory,

Chandigarh as a regular student of the said School/College. (A certificate from the head of

School/College to this effect must be attached). These seats will be termed as ‘U.T. Pool”. The

remaining 15% seats will be filled from amongst the Trainees who pass their qualifying

examination from the institutions other than those located in the Union Territory, Chandigarh or

otherwise. These seats will be termed as ‘General Pool’.

However, the Trainees whether belonging to reserved category or not. Who have passed

their qualifying examination from the institute located in Union Territory, Chandigarh, but are

not eligible for admission under U.T. pool quota, are eligible for admission in General Pool

quota.

1. SCHEDULED CASTE (SC) CANDIDATES: 15% of seats are reserved for the scheduled

caste candidates in each pool.

“Scheduled Caste candidates from all over India will be eligible for admission who

have Certificates issued in the candidate’s name only from the competent authority.”

2. OTHER BACKWARD CLASS (OBC) CANDIDATES: 27 % Seats are reserved for

trainees of UT/General Pool.

“Benefit of reservation to this category will be extended on the pattern of central govt.

wherein the OBC candidate’s caste would have to be as is included in the Central list and

the Union Territory-Chandigarh list and the Certificate is issued in candidates name only.

The list is Aheria, Aheri, Heri, Naik, Thori or Turi Bagria/ Bagaria Bairagi, Baragi/ Baregi

Barai, Tamboli/ Tomboli Barra Barwar Batera/ Battera Beta, Hensi/ Hansi or Hasi

Bharbhunja, Bharbhuja Bhat, Bhatra, Darpi, Ramiya, Bhuhalia-Lohar, Bhubalia-Lohar

Chang, Changar, Chhimba/ Chimba, Chhippi/ Chhipi/ Chippi, Chirimar/ Chrimar,

Christian converted from Scheduled Castes, Daiya, Dakaut/ Dahakaut, Dhimar, Dhinwar,

Jhinwar, Kahar, Mallah, Dhobi, Dhosali, Dosali, Faquir, Gadaria/ Gaddaria

Gawala/ Gwala/ Gowala/ Gowale/ Gawla/ Yadav/ Ahir Ghasiara, Ghosi Ghirath including

Chahng & Bahti Gwaria, Gauria or Gwar Hajjam/Hazam, Nai Jhangra-Brahman/ Jhangara-

Brahman/ Jangra-Brahman, Khati Jogi, Nath Jullaha/ Julaha (excluding those in Scheduled

Caste) Kamboj Kanjar, Kanchan Kumhar/ Kumahar Kurmi Khanghera Kuchband Labana,

Vanzara Lakhera, Manihar

3. DEPENDENTS OF DEFENCE AND PARA MILITARY FORCES etc: 5% seats in

each pool would be filled from the following categories of Trainees, in order of following

preference:

(a) Sons/daughters/spouse of defence personnel who are awardees of gallantry decorations of

Paramvir/Mahavir chakra in person or posthumously.

OR

Sons/daughters of defence personnel and para-military personnel like CRPF, BSF, IB,

N.S.G/ Special services bureau etc. Who are killed or are totally incapacitated in action

while in action and are wholly dependent on them.

(b) Sons/daughters of defence personnel and para-military personnel like CRPF, BSF, IB,

N.S.G/ Special services bureau etc. Who died while in service and were wholly

dependent on them.

Page 9: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

(c) Sons/daughters /Spouse of Ex-servicemen Defence personnel and para-military personnel

like CRPF, BSF, IB, N.S.G/ Special services bureau etc. Who are incapacitated while in

service and are wholly dependent on them.

(d) Sons/daughters of ex-servicemen (defence personnel and para-military personnel like

CRPF, BSF, IB, N.S.G/ Special services bureau etc.) Who are totally dependent on them.

(e) Sons/daughters of Serving defence personnel and para-military personnel like CRPF,

BSF, IB, N.S.G/ Special bureau etc. Who are wholly dependent on them.

4. CRITERIA FOR PERSONS WITH DISABILITY: 3 % seats in each pool would be filled

from amongst the person with disability. They will furnish a medical certificate by the Principal

Medical officer/ Civil Surgeon of Chandigarh or his concerned district indicating percentage of

disability whether he or she is otherwise able to carry on the studies and perform the duties in the

respective course, name of the disease causing handicap, whether handicap is temporary or

permanent, whether handicap is progressive or non-progressive. The Trainees having temporary

handicap would not be considered against the reserved seats for person with disability. Where

the certificates are issued by any authority other than the Principal Medical Officer of

Chandigarh and the candidate’s turn comes for admission against reserved seat for person with

disability, the concerned head of institution shall refer the candidates to the Principal Medical

Officer, Chandigarh and shall admit the candidate only after confirmation from the P.M.O.

Chandigarh.

5. CRITERIA FOR CHILDREN/GRAND CHILDREN OF FREEDOM FIGHTER:

2 % seats in each pool would be filled from the children and grand children of freedom fighters.

Note:

(i) A freedom fighter is a person who has either been granted freedom fighter pension

by the Chandigarh Administration or been awarded Tamra Patra for his political

sufferings. No person other than the above mentioned persons will be considered as

freedom fighters for the purpose of reservation in admission. The requisite certificate will be

issued by the Deputy Commissioner, Chandigarh and the certificate issued by any other

authority will not make the children and grand children of the freedom fighter eligible for

seeking admission in the institutions of U.T. Chandigarh. The certificate issued by the Deputy

Commissioner in Chandigarh will be taken into consideration irrespective of the form in which it

is issued, if the meaning otherwise is clear.

(ii) Grand Children means son’s sons/daughters or daughter’s sons/daughters.

(iii) The certificate of the candidates who apply under this category from the Chandigarh pool

should be verified by the Deputy Commissioner, U.T. Chandigarh. The outside candidates who

apply against this quota will have to submit their freedom fighter certificate from their concerned

Deputy Commissioner of the state.

6. CONCESSION /FACILITIES:

1. Stipend @ Rs. 100 PM will be paid to all the trainees as per their attendance. However, if

trainee is not interested to get the same and is interested in getting stipend through

various centrally sponsored schemes, he/she should give a written undertaking within a

fortnignt from the date of admission duly countersigned the Class In-Charges and their

parents.

2. Merit scholarship of Rs. 125 per month to 4% trainees will also be awarded on the basis

of result of internal examination which will be conducted after three months training.

3. No Tuition fee will be charged from SC/ST & Persons with disability, even if he/she

takes admission against any other category.

4. Every trainee will give his/her Bank account number along with IFSC code immediately

after the admission for disbursal of funds.

Page 10: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

POST MATRIC SCHOLARSHIP SCHEME:

Rate of Scholarship/Maintenance Allowance Under Different Categories.

Category Annual Income Admission and

Course fee

reimbursement

* Monthly

Maintenance

Allowance

Day Scholar Hostler

SC/ST 2,50,000 Max. upto 10,000

P.A.

230 380

OBC 1,00,000 - do - 190 290

Minority 2,00,000 - do- 230 380

Persons with

disability

1,80,000(Centre) - do - 400 700

60,000/-(UT) - 300 500

* Monthly maintenance allowance is for 10 months only from 1st April or from the date of

admission. The Trainees of this institute are covered under Group IV with entry qualification as

10th.

Conditions for availing above scheme:

a) Those residing permanently are eligible for Post Matric Scholarships.

b) Scholarship will be not be given to more than two Trainees in a family.

c) The Trainees obtaining benefits of scholarships under one scheme shall not be allowed to

avail benefits of scholarship under any other scheme.

d) Income certificates should be on self certification basis by way of an affidavit in non-

judicial stamp paper for self employed or from employer of employed parents.

e) Trainees should be regular in attendance for which a yardstick will be decided by the

competent authority.

f) The application forms for Post Matric Scholarships can be downloaded from the website

of the Director Higher Education, UT, Chandigarh i.e. www.chdeducation.gov.in and can

also be obtained from the training branch of the institute.

g) Desirous candidates may submit their request within three weeks from the date of

admission.

7. TUTION FEE WAIVER SCHEME:

1) 5 % of seats from amongst the seats reserved for UT Pool will be reserved for

Economically Weaker Sections (EWS). They will get Full tuition fee waiver benefit

in order of their merit. The candidates seeking admission under this quota will have to

submit income certificate based on the economic index and issued by competent

authority.

2) 3 % Seats from amongst the seats reserved for UT Pool will be reserved for Women

candidates in order of their merit.

3) 2 % Seats from amongst the seats reserved for UT Pool. However all the Physically

Challenged candidates are exempted for depositing of tuition fees.

Page 11: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

GENERAL NOTES

If the requisite numbers of candidates of the reserved seats in U.T. Pool are not available,

the seats will be thrown open to the candidates belonging to general category of the said

pool and similarly in general pool also.

The student who has applied in one or more than one reserved category is to be

considered in General Category first in order of his/her merit and then be given chance in

other categories.

Medical Aid: The institute has its own dispensary and the services of qualified and

experienced part-time Doctor for providing necessary medical facilities to the Trainees are

available. Full time pharmacist and Dresser are also available.

N.C.C. and Games:-The interested trainees can take part in NCC and Games. Facilities for

certain numbers of games exist at present and interested trainees can take part in one or more

of the items of which facilities are available.

Library and Reading Room:- There is a library containing Technical Books which can be

used for reference by the Trainees

Working Hours: The trainees will undergo training work for 42 hours per week including four

hours for extra-curricular activities, library reading and physical training, out of which ten

hours per week shall generally be put on theory, Engineering Drawing, Workshop Calculation

& Science and Employability Skills.

The timings are as follows:

From 9:00 AM to 5:20 PM with half an hour break from 1:00PM. to1:30 PM.. All Saturday

and Sunday will be observed as holidays.

Office Working Hours: 9:00 AM to 5:00 PM with half an hour lunch break from 1:30 to 2:00

PM. All Saturday and Sunday are holidays.

Holiday: The institute will observe all the gazetted and two restricted holidays during the

calendar year as declared by the Chandigarh Administration Chandigarh from time to time.

However two holidays will be at the discretion of the Principal of the Institution which shall be

granted as and when the occasion arises.

Attendance and Leave: The minimum compulsory attendance for the trainees in regard of

their eligibility for the final test is 80 percent of the actual number of working days. The

shortage of attendance below 80 percent but not below 70 per cent shall be condoned by the

Director, Technical Education; in exceptional cases provided that the trainee has not missed the

essential training and the absence was due to unavoidable circumstances reasons beyond

his/her control.

Note:-If the trainee absents himself for more than the half the number of days i.e. 50%

attendance, for whatever reasons his name will automatically struck off from the institute.

Leave. In addition to holiday, casual leave upto the limit of 12 days during the

month’s duration course and 24 days during the 2 years course will be

admissible to trainees subject to maximum 10 days at any one time. If trainee

is stipend holder he will continue to draw stipend at the full rate during such

leave.

Medical Leave Besides above trainees will be granted medical leave upto 3 Weeks on

producing the Medical certificate from Medical Officer or a Registered

Medical Practitioner.

Page 12: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

Special Leave Extraordinary leave will be allowed to the trainee upto 15 days. Stipend will

be admissible during such leave. In case, overstay Leave the name of the

trainee will be struck off from the rolls and treated as absconder.

Absconder: A trainee who absents himself from Training Institute/Centre for 10 Consecutive

days without permission and without informing the Principal will be treated as an absconder

and his/her name will be struck off from the rolls with effect from the 1st

day of his absence.

Study Tour: For the purpose of obtaining an idea of the actual working conditions, the

trainees nearing completion of their training will be sent to near by Industrial Workshops.

Medical Examination: The trainees seeking admission in any regular course, in any Branch

or in the hostel are required to obtain Medical Certificate from a MBBS Doctor, as required

under Training Manual of DGE&T, Govt. of India, New Delhi and submit the same on the date

of finalization of their admission at the concerned institute.

Final Trade Test: A trainee has to undergo final trade test examination which is being

conducted by the Director general Employment & Training New Delhi. The certificate issued

to him will be National/State level certificate. The examination question papers supplied by the

DGET will probably be in both the language (viz; English and Hindi). The examinee can reply

in English or Hindi or regional language Punjabi also. The final trade test will be held after the

completion of the course as per the course duration viz. six months, one year, two years, or

three years. Employability Skills is a compulsory subject for all trades. If the same has been

passed earlier in examination conducted by the DGET, the trainee shall be exempted for

appearing in the same.

Apart from above examination, regular monthly tests will be conducted by respective class in-

charges and performance of the same will be highlighted in the progress cards and will be

taken into account while assigning Sessional marks. Improvement in any subject is not

available.

The examination fee is required to be deposited as per the dates displayed on the notice

board. A late fee of Rs. 5/- will be charged extra after due date.

The failed trainees of conventional trades as well as COE – Automobile trade will have to

deposit the reappear forms and fees within one month from the declaration of the Result.

The final trade test/Supplementary exams are held at the end of each semester. However

in case of Automobile trade under COE the same are held in August and February

respectively for which date will be displayed on the notice board.

National trade Certificate:- On completion of the training PNTC and NTC will be given free

of cost. In case of loss of Original NTC/STC by the trainee, the duplicate can be requested by

submitting Rs. 100 along with the coy of F.I.R.

Apprenticeship Training A trainee who passes All India Trade Test under Craftsman test

Scheme is eligible to join the industry as apprenticeship. He/she may contact the

Apprenticeship Cell at Govt. ITI, Sector 28 C, Chandigarh for signing the contract as

Apprenticeship and further he/she can join the local industry as per vacancy.

Provision To Appear As Private Candidate The Candidate can also appear in the All India

Trade Test under Craftsman test Scheme as a private candidate with the following eligibility

conditions:

The applicant should have minimum prescribed entry qualification for a particular trade

under CTS (Craftsman Training Scheme) in which he/she desirous of appearing as private

candidate.

The applicant should possess a minimum of three year experience in the relevant trade in

establishments implementing Apprenticeship Training Scheme/Small establishments and shops

under factory Act or Registered with any Government/Local Authorities.

Page 13: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

The private candidate would appear for the first time of supplementary examinations

during the month of December/January for which Press advertisement will be given. He/she is

also eligible to avail five additional chances with in the period of Three years of pass the final

trade test for the award of National Trade Certificate in the subsequent examination.

Cost of form: Rs. 25/-

Cost of appearing in the examination: Rs. 200/-

RULES AND REGULATIONS

(i) Each student may enjoy the full benefits of the facilities placed at his disposal but he has

to abide by the rules and regulations of the Institute also. These rules are solely designed

to safeguard the welfare of Trainees and are liable to change/modify without any prior

notice from time to time. The Trainees are advised to keep themselves informed and

aware about the day to day instructions and updations in the Institute. A plea of ignorance

of any rules cannot be accepted as an excuse of breaking it. Trainees are expected to

maintain the decorum and to pay the due respect to all faculty members. Every staff

member has authority to point out the indiscipline created by the trainees even of other

trades also.

(ii) Loud talking, loitering or congregating in the corridor, being a source of

destruction is not permitted.

(iii) Late arrival and early departures from the class are recorded as absence from the class.

(iv) The trainees are advised to work in the workshop as per the instructions of the class In-

charges.

(v) No student has any authority over the employees of the Institution.

(vi) Tools and other machinery must be left in good order after use. If damaged, the fact of

the same must be immediately reported for necessary action.

(vii) No responsibility can be accepted for any loss or damage to student’s property.

(viii) The studies at the Institute require attention and diligence on the part of Trainees. A

student neglecting his studies and showing unsatisfactory progress will be given two

warnings after which if he/she fails to improve, he/she will be liable for expulsion from

the Institution.

(ix) Trainees shall observe all safety precautions. The Institution is not responsible or

accidents of whatever natures in the Institute, Hostel, Workshop and Playground.

(x) Trainees are issued identity cards at the time admission. Loss of the card must be reported

immediately and duplicate card will be issued on payment of Rs. 50. Failure to inform

about the loss will be seriously taken.

(xi) Trainees are advised to deposit all cash with local Post Office and draw their

requirements from time to time. The Institute is not responsible for any loss by the theft

or otherwise.

(xii) Trainees are not allowed to take part in the ragging Politics or go to Press if any student

found violating the rules, he will be expelled from the Institute.

(xiii) Vehicles and their accessories brought by the Trainees in the Institute campus will be at

their own risk and responsibility. Institute will not be responsible for any theft or loss.

However, if the trainees need the facilities of parking/security of their vehicles, the same

are to be requested to the Principal through their class Incharge and nominal charges will

be taken from them.

(xiv) The Trainees must inform their change of address, otherwise the institute will not be

responsible in any event arising thereof.

(xv) For Govt. ITI, Sector 28C, Chandigarh it is compulsory to wear the Gray Colour Trouser

and Sky Blue Colour Shirt for all the Trainee of Engineering trades and Gray Colour

Trouser and white Colour Shirt for all the Non Engineering trades during all working

days from 9.00 AM to 5.00 PM.

(xvi) Caution money deposited by the trainee will be refunded to them on completion of

institutional training. Caution money will be forfeited in the case of trainees who

discontinue their training after one month of commencement of training.

Page 14: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

(xvii) Late deposit of fees will be fined @ of Rs. 1/- per day for first 15 days after which the

name will be removed from the rolls However, readmission can be granted at the

discretion of the Principal with re-admission charges of Rs. 200/-.

PROCEDURE FOR SUBMITTING APPLICATION FORM

The application for admission along with the required certificates/self attested copies as

detailed below should be addressed to the Principal, Govt. Industrial Training Institute,

Sector 28 C, Chandigarh or the Principal, Govt. Industrial Training Institute for Women,

Sector 11 C, Chandigarh, The application form for admission is enclosed.

(i) A Self attested Photo copy of academic entry qualification Certificate and

Certificate regarding proof of age. (Two Copies)

(ii) Candidates claiming seats against reserve categories should submit self attested

copy of the certificate issued in their name. Sample enclosed at Appendix ‘A’

(iii) Character Certificate from the Institute/School/College last attended. In case of

Gap period the same can be had from municipal councilor/Gazetted

Officer/Sarpanch as per Appendix “D”.

(iv) Recent passport size photograph is to be affixed on the application form at the

given space.

Note:- (i) Applicants applying for any reserve category including SC/ST/OBC should attend

interview along with general category candidates. If they are not selected along

with general candidates, they should avail another chance in the interview

exclusively for reserve category candidates.

(ii) Applicants seeking admission against Sports quota must submit gradation

certificate from Director of Sports and an affidavit for their achievements as

required.

(iii) Incomplete applications received will not be considered.

(iv) Application submitted on the form contained in the current year prospectus will

only be accepted.

(v) Certificate of dependants of Armed/B.S.F. Forces Personnel killed or disabled in

action duly signed and verified form the 1st Class Magistrate of area or competent

authority of the services concerned as per specimen at Appendix “B”.

(vi) Certificate of disabled for handicapped Trainees, duly signed and verified by

P.M.O. on appendix “C”.

(vii) During training, the trainees will not be allowed to pursue any other course of

study.

viii) The candidates should write the permanent address on the application form as

well as on the back of Matriculation Certificate where their PNTC & NTC can

be dispatched.

PROCEDURE TO PREPARE THE MERIT LIST:

1. U.T. Pool: CBSE Examination (Total of first: five subjects, in the detail marks certificate,

of qualifying examination provided the candidate has been declared pass).

The following criteria will be followed for preparing Merit lists for admission to various trades

with entry qualification as Matriculation:

( i ) The CGPA will be multiplied by 9.5 (multiplying factor ), which provide overall

indicative percentage of marks for determining their merit. If there are more than on

candidates with same indicative percentage, preference will be given to the candidates

having obtained higher Maths and Science Grade Points. If still there are more than one

candidates even after applying this method, the candidates having obtained higher

Grade Points in English subject, will be given preference However, in the trades, where

Maths and Science subjects are not essential, in such cases, after taking into account the

Page 15: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

overall indicative percentage or marks, the candidates with higher Grade Points in the

subject of English, will be given preference.

(ii) The candidates who have passed their Matriculation Examination prior to the

introduction of grading System by the CBSE or from other State Boards and State

Boards and apply for admission in any Trade having entry qualification of

Matriculation, in those cases, instead of taking their percentage of marks obtained, the

Grades awarded by the CBSE will be taken into account of CPGA will be decided, as

per CBSE formula and then the figure coming out of it, will be multiplied by

9.5(multiplying factor), which provide overall indicative percentage of marks for

determining their merit. In case of tie, procedure as explained in Para ( I ) will be

followed so that there is no discrimination in any case.

(iii) As the Grading System has not been followed in the Eighth Class Examination

and 12th

Class Examination, in these cases, the merit lists will be prepared as per the

marks obtained by the candidates in their respective qualifying examination.

Grade Range (marks) Grade Grade Point

91-100 A1 10

81-90 A2 9

71-80 B1 8

61-70 B2 7

51-60 C1 6

41-50 C2 5

31-40 D 4

21-30 E1 3

20 & Below E2 2

2. General Pool:

a) Punjab State: Either the certificate issued for the qualifying examination indicates

grand total (marks obtained/maximum marks) OR Punjabi out of 150, math, Science,

Social Studies, English and Hindi out of 100 each i.e. total of 650 marks only.

Note: The Board declares a candidate pass even if he/she passes in five subjects the

aggregate will be taken from 550 marks only.

b) Haryana State: Indicated grand total (Marks obtained/maximum marks) are taken for

Merits. Under semester system the GPA (Grade Point Average) *10 will be taken into

Account for considering the merit

c) Himachal/Bihar/U.P.: Indicated grand total (Marks obtained/marks) are taken for

Merits.

d) Open School: If grand total (Marks obtained/Maximum marks) are not given, First

five subjects will be considered for the pass Candidates.

e) Remaining other States: Either the certificate issued for the qualifying examination

indicates grand total (Marks Obtained/maximum marks) OR the Candidate should bring

the same from the concerned school.

Page 16: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

Appendix A

Certificate to be submitted by candidate belonging to Scheduled

Scheduled Castes/Scheduled Tribes/O.B.C.

I know Sh./Ms___________________________ S/o, W/o, D/o___________________

of (Place & District)_______________________________________________personally. He

belongs to _________________________community which has been declared Scheduled

Castes/Scheduled Tribes/O.B.C. in _____________(State)

___________________________________________________________________________

Dated: Signature________________________

Designation______________________

Seal of the court or stamp of Office of the

Officer signing the certificate must be affixed

here

(The certificate may be signed by 1st class Magistrate/Competent Authority of the area)

Appendix B

Certificate to be submitted by children of deceased/disabled ex/servicemen including those

killed or disabled during peace time/children of ex-servicemen/children of serving

jawans/children of serving Officers and ex-servicemen.

Certified that Sh./Ms____________________________ S/o, W/o, D/o __________________of

(Place & district)_____________________________________is a child of deceased/disabled

Ex serviceman including those killed or disabled during peace time/child of ex-serviceman/child

of serving jawan/child of serving Officer and ex/serviceman.

Dated:_______________ Signature:______________________

Designation_____________________

Seal of the Officer

(The certificate may be signed by the competent authority of the services concerned or 1st class

Magistrate of the area)

SAMPLE OF FORMS

Page 17: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

Appendix C

Certificate to be submitted by the Candidates with disability

Certified that Sh./Ms_________________________ S/o, W/o, D/o______________________

is physically disabled and extent of which is not that much that it will hinder to pursuit his/her

studies.

Dated: Signature____________________________

Designation__________________________

Office seal

The certificate be signed by P.M.O. Chandigarh

___________________________________________________________________________

Appendix D

Certificate of Character from the Gazetted Officer

Note: This Certificate is required form the candidates who are having gap period in between this

session and the qualifying exam.

I certify that Sh./Ms.______________________ S/o, W/o, D/o____________________

is personally known to me for the last_______ Years. He/She bears a good moral character.

Dated: Signature_______________________

Designation_____________________

Stamp

The above certificate may be signed by Gazetted Officer/1st class Magistrate.

___________________________________________________________________________

SAMPLE OF FORMS

Page 18: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

Application Form for Admission to

Govt. I.T.I., Sector 28 C, Chandigarh & Govt. I.T.I. (Women), Sector 11 C, Chandigarh

Session 2014-2015

(To be f i l led by the candidate in his/her own handwriting in block let ters )

Name of candidate

Father’s name and

Occupation

Address

Phone/Mobile Nationality

Date of Birth (DD/MM/YY) Religion

Reserved category (SC/ST/OBC/Sports/Women/Defence/EWS/Freedom Fighter/

Persons with disability/Kashmiri Migrant) ______________________

Education Qualification: Attach self attested copies of certif icates for following:

Examination passed Year Marks

obtained

Total

Marks

Percent

Marks/CGPA

Name of

School/Board/University

from which you have Passed

MATRIC

MIDDLE

Details of the bank account in which Stipend/Scholarship can be credited :(immediately after admission)

Name of the

Bank/Address

Account Number

IFSC

code

I certify that the information given is correct to the best of my knowledge and belief and will

abide by the rules and regulations as mentioned in the prospectus.

____________________ _________________________

(Signature of candidate) (Signature of Father/Guardian)

Certificates (Self Attested) Enclosed with this Form:

1. Date of Birth Certificate: Matriculation/Middle

2. Detail marks Certificate: Matriculation/Middle

3. Any Reserve Category:_____________________________________

4. Any other:_______________________________________________

__________________

(Signature of Receiver)

*Middle standard marks are required for admission in middle based trades.

Space for self

attested passport

size photograph

Page 19: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

(FOR OFFICE USE ONLY)

Percentage of marks in Matric (10th

)

MATHS

SCIENCE

ENGLISH

Weightage of NCC, if any

Overall Percentage

10th

8th

Reserve Category, if any

Dated Signature of Person Deputed

Original Documents and Percentage

Checked

Signature Signature

Details of Admission:

Admitted in Trade

Roll No

Receipt No.

Date

Reserved Category, if any

Asstt. Admission Incharge

Admission Incharge

Page 20: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

ABOUT GOVERNMENT INDUSTRIAL TRAINING INSTITUTE,

SECTOR 28 C, CHANDIGARH

The Industrial Training Institute was set up in 1962 in the erstwhile State of joint Punjab. At

present Industrial Training Institute Sector: 28-C, Chandigarh is run by the Chandigarh

Administration, Chandigarh under the control of Directorate of Technical Education, UT,

Chandigarh.

The institute is headed by Er. H.S.Kalra, as Principal.

The Institute is one of the oldest and largest in this region of the country.

It has presently 20 Trades viz., Plumber; Welder (Gas & Electric) Fitter; Turner; Carpenter;

Electrician; Instrument Mechanic; Information Technology & Electronic system maintenance,

Mechanic Refrigeration & Air Conditioning, Draughtsman Civil; Draughtsman Mechanical,

Electronics Mechanic, Tool & Die Maker, Machinist Grinder, Machinist, Computer Operator

Programming Assistant, Cutting & Sewing, Stenography English, Stenography Hindi etc. and

Automobile Centre of Excellence. The overall strength of this institute is 576 trainees excluding

30% Supernumerary Seats.

AIMS AND OBJECTIVE

The aim of the I.T.I. is to create a learning environment for the trainees and provide

opportunities for them to realize their complete potential. Emphasis is laid on development of

individual aptitudes for learning and ability to adapt to the practical working. Our main

objective is to provide a curriculum designed to develop a trainee so that he/she emerges as

Technically skilled citizen who can adjust him/her self in the modern industry as well as be a

skilled and successful entrepreneur. Aims of the Institute are:-

i) To ensure a steady flow of skilled workers in different trades for the industry,

ii) To raise the quality and quantity of industrial production by systematic training of

workers

iii) To reduce the unemployment among the educated youth by equipping them for suitable

industrial employment.

Page 21: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

FACULTY

The institute has highly-qualified, trained and dedicated faculty with ample experience. They are

innovative well-versed in use of modern technology to enhance the teaching learning process.

Faculty members are regularly sent to participate in workshop and refresher courses in order to

keep in touch with the latest development and change in technology and industry.

CURRICULUM

The curriculum of each trade is uniformly sub-divided into activities and tasks to be carried out

every week. The curriculum of most of the trades has been revised and updated by the trade

wise committees constituted by the Director General Employment & Training (DGET). The

curriculum also shows the achievement level at the end of each unit.

TRAINING FRAME WORK

(a) Technical Training in Engineering trades such as Welder (Gas & Electric) , Plumber and

Carpenter for a period of one year, Mechanic Electronics, Electrician, Fitter, Turner,

Machinist Draughtsman Civil ; Draughtsman Mechanical; Instrument Mechanic; Mech.

Ref. and AC ; Machinist Grinder for the period of 2 years & Tool and Die Maker for a

period of three years.

(b) Training in Non-Engineering Trades such as Computer Operator and Programming

Assistant, Stenography English, Stenography Hindi and Cutting & Sewing for one year

duration.

Conditions:

(i) Candidates applying for admission should attain the age of 14 years as on 01.08.2014.

(ii) Candidate should be physically fit for the work involved in the trade for which they are to

be trained.

(iii) He/she should be of good moral character.

(iv) Candidate will be selected by a admission committee constituted for the purpose.

Page 22: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

INSTITUTE MANAGING COMMITTEE (IMC):

The Chandigarh Administration has constituted an Institute Management Committee

under the Chairmanship of Sh. Manish Bagrodia Managing Director, Winsome Yarns Ltd.

with a primary objective of increasing the relevance of training and has close Industry

Institute interface by participating in the admission, examination, industrial and placement of

trainees. The Institute Managing Committee has all powers as per the guidelines received

from the Director General Employment & Training, Ministry of Labour, New Delhi from to

time.

Members:-

1 Sh. Manish Bagrodia, Managing Director Winsome

Yarns Ltd.

Chairman

2 Regional Director, CII, Sector 31-A, Chandigarh

CII Representative

3 Regional Employment Officer or Representative

Representative Regional

Employment Exchange

4 Research Officer, Director Technical Education,

Union Territory, Chandigarh

Representative of Director

Technical Education, Union

Territory, Chandigarh

5 Sh. Vikram Sahgal, Managing Director, Micron

Instruments, Chandigarh

Industry Member

6 Sh. Nitin Mehan, Managing Director, Auto Pace Pvt.

Ltd.

Industry Member

7 Sh. Sanjay Dahuja, Managing Director, Dynamic

Motors

Industry Member

8 Sh. Ashok Gupta, Managing Director, Diplast Plastic

Ltd.

Industry Member

9 Sh. Nitin Peshawaria Alvind Industries Chandigarh

Industry Member

10 Principal, ITI, Chandigarh

Member Secretary

11 Sh. R.K. Sharma, Group Instructor, G.I.T.I,

Chandigarh

Senior Faculty

12 Sh. Arun Gupta, Group Instructor, G.I.T.I,

Chandigarh

Co-ordinator

13 Trainee of the Institute

Trainees Representative

Page 23: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

ACHIEVEMENTS

The Institute has following achievements to its credit in the recent past:

1. Best ITI award by the DGET:- The institute has been awarded the best ITI award in the

year 1995, 2003, 2005 by the Directorate, General of Employment and Training, New Delhi.

2. State Level Best Craftsman Award in following Trades:- The trainees of following trades

stood first in the state level competition conducted by the Directorate General of

Employment and Training, New Delhi.

1 Machinist

2 Electronic Mechanic

3 Instrument Mechanic

4 Cutting & sewing

5 Electrician

6 Draughtsman Civil

7 Draughtsman Mechanical

3. Regional Test Centre for CII Work Skills Competition: - The institution has the

distinction of continuously being selected as Regional Test Centre for CII Work Skills

Competition in Northern Region to its credit since 2000.

PREVIOUS PLACEMENTS:

The placement record of the institute is very impressive. Many reputed companies recruited our

Trainees through campus interviews.

Birla Textile Mills, Baddi (H.P.)

Bosch Ltd, New Delhi.

Cooper Automotives Ltd., Panchkula.

Denso Haryana Pvt., Ltd., Gurgaon, (Haryana)

Diplast Plastics Ltd., Mohali.

Drish Shoes Ltd, Panchkula.

Essen Deinki, Chandigarh.

Godrej & Boyce Mfg., Co. ltd., Mohali

Groz-Beckert Asia Pvt. Ltd, Chandigarh.

Hero Honda Motors Ltd, Dharuhera.

Hyundai Motor India Ltd., New Delhi.

IFB Industries Ltd., Chandigarh.

Larsen & Tourbo Ltd., Chandigarh

LG Electronics India Pvt., Greater Noida.

Mahindra First Choice Wheels Ltd. New Delhi.

Micron Instrument, Chandigarh.

MOI Engg. Ltd, Mohali.

Nestle India Ltd., Samalkha (Haryana).

New Holland Tractors (India) Pvt., Ltd., Greater Noida (U.P.)

Procter & Gamble hygiene and Health Care Ltd., Mandideep (M.P.)

Synergy Telecommunications, Chandigarh.

T & G Pure Aqua Pvt. Ltd, Chandigarh.

Tube Product of India, Mohali.

Voltas Ltd., International Operation Business Group, Chennai.

Winsome Knitwear, Chandigarh

4. Memorandum of Understanding (MOU’s)

The Institute has signed MOU with the following companies for training and placement to

trainees of respective trades:

1) Engineers Auto (EA) __________ (for Fitter, Turner, Machinist, Welder and Instrument Mechanic).

2) LG electronics India Pvt. Ltd_________( for Ref & A/C ITESM and Electronics Mechanic).

3) International Switchgear Pvt. Ltd ____________(for Electrician trade).

4) Architects Inc. (TAI) ____________( for Draughtsman Civil).

5) Diplast Plastic Ltd.___________ (for Plumber).

Page 24: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

INSTRUCTIONAL STAFF

PRINCIPAL

1. Er. H.S Kalra

GROUP INSTRUCTORS

1. Sh. Rakesh Chander Sharma

2. Sh. Rakesh Kumar

3. Sh. Raj Kumar Sharma

4. Er. Arun Kumar

INSTRUCTORS

1. Sh. Desh Raj Sharma Workshop Calculation & Science

2. Sh. Prubhjot Singh -do-

3. Sh.Parminder Pal Singh -do-

4. Vacant Engg. Drawing

5. Er. Ashwani Kumar Nanda -do-

6. Sh. Kulwinder Singh Draughtsman (Civil)

7. Sh. Daljit Singh Draughtsman (Mechanical)

8. Vacant Electrician

9. Er. Ravinder Kaushal Electrician

10. Sh. Ram Kumar Instrument Mechanic

11. Sh. Kulwinder Singh -do-

12. Sh. Bant Singh Mechanic, Refrigeration & Air Conditioning

13. Sh. Shiv Kumar -do-

14. Sh.Ajaib Singh Fitter

15. Sh. Mukesh Kumar -do-

16. Sh. Sunil Kumar -do-

17. Sh. Sanjeev Kumar Turner

18. Sh. Jagdish Singh -do-

19. Sh. Varinder Singh Machinist

20. Sh. Jorawar Singh -do-

21. Sh. Surinder Singh Carpenter

22. Sh. Inderpreet Singh Lamba Tool & Die maker (PTJ&F)

23. Sh. Ramesh Chander Machinist Grinder

24. Er. Rekha Handa ITESM

25. Er. Bindu Bala Electronic Mechanic

26. Er. Pankaj -do-

27. Ms Suman Gupta Computer Operator & Programming Assistant.

Page 25: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

28. Sh. Rajesh Kaushal Automobile, Centre of Excellence

29. Er. Chandi Parshad -do-

30. Sh. Rakesh Verma -do-

31. Sh. Charanjit Singh -do-

32. Sh. Subhash Chand Welder

33. Sh. Amarjit Singh Plumber

34. Ms. Parveen Sharma Stenography English

35. Ms. Bhupinder Kaur Language (English)

36. Sh. Rajinder Kumar Stenography (Hindi)

37. Ms. Meera Sharma Cutting & Sewing

38. Sh. Shiv Charan Audio Visual

(The Vacant posts are under the process of recruitment. Till then as a stop gap

arrangement, these posts are filled through Contract/Guest Faculty.)

OFFICE STAFF:

1. Vacant Office Superintendent

2. Sh. Varinderjit Singh Senior Assistant

3. Ms. Suman Mahajan Senior Assistant

4. Sh. Krishan Pal Senior Assistant

5. Sh. Harmesh Kumar Junior Assistant

6. Ms. Jaswinder Kaur -do-

7. Sh. Sukhwinder Pal Kaur -do-

8. Ms. Madhu Bala Clerk

9. Ms. Balwinder Kumari -do-

10. Sh. Virander Pal Sharma -do-

11. Ms. Neelam Jolly Librarian

12. Vacant Part-time Medical Officer

13. Ms. Renu Aggarwal Pharmacist

14. Sh. Jagjit Singh Dresser

(Vacant posts are under process of recruitment)

Page 26: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

FEE STRUCTURE FOR ADMISSION IN GITI CHANDIGARH

S DESCRIPTION DURATION OF THE COURSE

12

Months

24

Months

A Govt. Revenue (Non-Refundable)

1 Tuition fee @ Rs.100 PM 1200 1200 (P.A)

2 Exam Fees 200 400

B

PLA Account

1 Security : (Refundable )

a Caution Money 250 250

b Library Security 100 100

2 Fund: (Non-Refundable)

a Student Fund 240 480

b Identity Card Fund 30 30

c Maint. of Play Ground Fund 60 120

d Magazine/Brochure Fund 100 200

e Stationary Fund/Class Examination

50 100

C IMC Account: (Non-Refundable)

Placement Registration fee 50 50

TOTAL 2280 2930

The tuition fee for 2 year trades can be deposited from 1st to 25

th July with the cashier for

next 12 months every year.

- In case of default in submitting tuition fees, fine @ Rs. 1/- per day for first 15 days will

be charged, after which the name will be removed from the roll. However, readmission

can be given at the discretion of the Principal with readmission fee of Rs.200/-.

Page 27: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

THE GOVERNMENT INDUSTRIAL TRAINING INSTITUTE FOR WOMEN, CHANDIGARH

1. BRIEF INTRODUCTORY BACKGROUND

The Government Industrial Training Institute for Women is situated in Sector 11-C, Chandigarh.

It was established after the partition of the Punjab as a result of amalgamation of the Zanana

Industrial School and Lady My nard Industrial School for Girls, Lahore. It is the research

Institute

of trades/crafts in Industrial School for Girls.

The Institute is under the control of the Chandigarh Administration and runs on the

pattern laid down by the Director-General of Employment and Training, Government of India.

The Director of Technical Education, Union Territory, Chandigarh, is the overall incharge of the

institute.

2. SCOPE AND OBJECTIVES The objectives of the institute are linked up with the following activities:-

(i) To ensure a steady flow of skilled workers in different trades for Industry.

(ii) To raise the quality and quantity of Industrial production by the systematic training of

workers.

(iii) To create employment opportunities among educated young women by equipping them for

suitable Industrial employment.

(iv) Computer Operator & Programming Assistant will enable the women in acquiring skill and

expertise in operating computers. This is helping women in finding jobs in many fields such as

Offices, Banks, Publishing Houses, Newspapers etc. or starting their own ventures. Rate of

employment is very high.

(v) Hair and Skin care trade will enable the women to work in Beauty Parlours/Saloons or open

their own Parlours to become self employed.

(vi) INTRODUCTION OF NEW JOB ORIENTED COURSES: Three new highly in

demand and highly paid courses viz. Human Resources Executive, Finance Executive and

Marketing Executive are being introduced from this session. The institute has already

initiated the process for affiliation of these courses with NCVT and the same is likely to be

granted before the start of the session from August, 2014.

3. STAFF The Institute is provided with adequate staff in accordance with the norms fixed by Director-

General of Employment and Training.

Page 28: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

FACULTY AT A GLANCE 1. Er. Rajan Dogra : Principal

GROUP INSTRUCTORS

1. Smt. Suman

2. Smt. Anuka

3. Sh. Naval Kishore Verma

4. Vacant

CUTTING & SEWING

1. Smt. Saroj Sharma : Instructor

2. Smt. Archana Sharma : Instructor

3. Smt. Sushma Rani : Instructor

4. Vacant : Instructor

EMBROIDERY & NEEDLE WORK

1. Smt. Roop Kaur : Instructor

2. Smt. Swarn Kanta : Instructor

STENOGRAPHY TRADES

1. Smt. Rajnish Bala : Instructor (Hindi)

2. Sh. Kesar Singh : Instructor (English)

3. Smt. Nand Kaur : Instructor (English)

4. Smt. Harvinderjit Kaur : Instructor (Punjabi)

5. Vacant : Instructor (English Language)

6. Faculty on contract : Instructor (Hindi Language)

COMPUTER OPERATOR & PROGRAMMING ASSISTANT

1. Faculty on contract : Instructor (COPA)

2. Faculty on contract : Instructor (COPA)

3. Faculty on contract : Instructor (Employability Skills)

DRESS MAKING

1. Smt. Veena Gupta : Instructor

2. Vacant : Instructor

HAIR & SKIN CARE

1. Smt. Renu Gulati : Instructor

2. Faculty on contract : Instructor

Page 29: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

HUMAN RESOURCES EXECUTIVE

1. Vacant : Instructor

2. Vacant : Instructor

FINANCE EXECUTIVE

1. Vacant : Instructor

2. Vacant : Instructor

MARKETING EXECUTIVE

1. Vacant : Instructor

2. Vacant : Instructor

HOSTEL

1. Smt. Sarojani Rani : Hostel Supdt-cum-P.T.I.

DISPENSARY

1. Vacant : Pharmacist

OFFICE STAFF

1. Vacant : Supdt. Grade-II

2. Smt. Suman Sharma : Senior Assistant

3. Smt. Chanchal Kumari : Junior Assistant

4. Sh. Krishna Lal Yadav : Junior Assistant

5. Sh. Sanjeev Kumar : Clerk-cum-Cashier

6. Smt. Reena Sharma : Clerk

4. Fee and Other Charges

A. (i) Tuition fee:- Rs 100 p.m. is chargeable from each category of trainee. Fee is payable in

two instalments, one at the time of admission to the First Semester and the other before the start

of Second Semester. No Tuition Fee is charged from SC/ST and physically handicapped trainees.

Similarly, no Tuition Fee will be charged from 5% women candidates coming from

economically weaker sections which will be determined by the Admission Selection Committee

after scrutiny of their Income/Pay Certificates.

(ii) Caution Money:- Rs. 250 is chargeable from each trainee at the time of admission.

(iii)Trade Test Fee:- (a) Regular Trainee (1st Attempt) : Rs. 100 at the end of each Semester.

(b) Failed Trainee (Second and : Rs. 125

Subsequent attempt)

B. Class Examination fee : Rs. 50 per Semester. C. Room Rent for Hostel Students : Rs. 100 p.m. (to be charged Half Yearly) D. Hostel Rent for Electricity, Water : Rs. 150 p.m. (to be charged Half Yearly) And Furniture Charges. E. Identity Card Fee : Rs. 50 at the time of admission. F. Hostel Service Charges : Rs. 100 per annum.

Page 30: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

G. Funds:- a) Student Fund : Rs. 500 for the entire session at the time of admission. b) Maintenance of Play Grounds : Rs. 75 per month per trainee (to be paid for and Lawns the entire session at the time of admission) c) Magazine/Brochure Fund : Rs. 100 per annum. H. Admission Registration Fee : Rs. 50

All the above dues are to be paid in cash and once paid are not refundable.

Every student will be required to deposit on admission a sum of Rs. 250 as Caution Money. A second deposit may also be asked for, if the first gas been exhausted. The Caution Money is refundable to the trainee on the completion of the complete course of one year duration after deduction of Government dues, if any. Caution Money will be forfeited in the case of trainees who discontinue training after one month of admission.

Note: - In case of default in submitting fees and other charges, fine @ Rs. 10/- per day for first

15 days will be charged, after which the name will be removed from the roll. However,

readmission can be given at the discretion of the Principal with readmission fee of Rs.500/-. No

attendance and other benefit will be given on account of re-admission.

The examination fee is required to be deposited by due date fixed by the institute. A late fee of Rs/- 5 will be charged extra after the due date up to 10 days before the commencement of the examination. No fee will be accepted thereafter.

5. Hostel Facilities (i) Students desirous to join hostel should apply for the same on the prescribed form. Admission

forms for hostel must have photos and signatures of parents and local guardians.

12.5% seats are reserved for Scheduled Caste and 5% for Scheduled Tribes.

(ii) Caution money of Rs/-125 will be charged from the hosteller on admission in the hostel.

(iii) Valedictory function charges of Rs 100/- per student residing in the hostel will be charged

annually at the time of admission in the hostel.

Hostel Rules (i) Mess is managed on contract basis on the rate contract duly approved by the Principal and the

Hostel Mess Committee at the time of commencement of new session.

(ii) Each student has to bring health certificate at the time of admission to the hostel.

(iii) Students must not bring costly Jewellery or keep excessive money with them. No complaint

regarding any loss shall be entertained

(iv)Students are expected to bring with them their bedding, bed linen, books, a tumbler, two

plates, a spoon and a tube light.

(v) The hostel students are not permitted the use of any private electrical appliances, radio etc. In

case of default, Rs 5/- will be imposed as fine and the electrical appliance will be confiscated

from the defaulter to be returned only when she leaves the hostel.

(vi) The Principal reserves the right of censorship of all correspondence, if felt necessary.

(vii) Normally no student will be allowed to go out of town except on second Saturday and that

too with the permission of Parents/Guardians/Principal and she must reach back hostel in time.

(viii) Parents/Guardians must write to the Principal for permission before hand in case they want

to take their daughters home during the session.

(ix) Students are required to take meals in the Dining Room in proper dress. No student can bring

food to her room.

Visitor’s Days …. Thursday and Sunday

Timings …. (i) 5.00 p.m to 6.00 p.m (Thursdays)

(ii) 10.00 a.m to 1.00 p.m and 3.00 p.m to 5.30

p.m (Sundays)

Visiting days and time will be strictly observed.

Page 31: Directorate of Technical Education, U.T, Chandigarh 2014-15.pdfDirectorate of Technical Education, U.T, Chandigarh PEC University of Technology Campus, Sector 12, Chandigarh (Ph. No

Visitors and leave from Hostel

(i) At the time of admission, each admitted student is required to bring an approved

list of visitors (Local and Outsiders) from their Parents/Guardians duly signed

along with their photographs.

(ii) No student is allowed to see a visitor without the permission of either Principal

or the Hostel Superintendent.

(iii) No guest paying or otherwise can be accommodated in the student’s room.

(iv) Students are not allowed to spend nights out of the hostel unless permitted by

the Parents/Guardians.

(v) Students are allowed to go out for shopping in groups of not less than four on

every Saturday from 10.00 a.m to 2.00 p.m. Persistent late arrivals from shopping

or locals will be dealt with in the following manner:

Ist Occasion : Warning and written intimation to

Parents/Guardians.

2nd

Occasion : Written Intimation to

Parents/Guardians to see the Principal

Personally

3rd

Occasion : Expulsion from the hostel

(vi) The permission for pictures, outings, concerts etc, shall be granted at the

discretion of the Hostel Superintendent.

(vii) No student is allowed to enter hostel during class hours except sickness or has

a signed chit from her class teacher or Hostel Superintendent.

(viii) For the upkeep of the general tidiness, cleanliness, no student shall be

allowed to leave the hostel on the last Sunday of the month.

(ix) The Hostel students going out to the Parents/Local Guardians must get a ‘Pass’

before they leave and return this ‘Pass’ back to the Hostel Superintendent on their

return duly signed by the Parents/Local Guardians. These signatures will be

matched with the signatures on Hostel Admission Forms. -