DIN Rail Mounted Patch Panels provide an effective patching solution for industrial networks inside controlpanels and distribution cabinets where DIN mounted equipment is being used. The modular designaccommodates copper, fiber and multimedia modules to support most applications. The low-profile angleddesign minimizes cable bend radius in shallow enclosures where space is a premium and can be side stackableto grow with your networking changes.

• Cable strain relief to secureand protect connection points

CONNECTING THE WORLD TO A HIGHER STANDARD

W W W . S I E M O N . C O M / S I S

DIN Rail Mounted Patch Panel

• Angled design for low-profile cable routing

• 4-port opening compatiblewith Siemon Ethernet andmultimedia modules

STANDARDS COMPLIANCE• European Standard EN 50022

• IEC International Standard 60715

APPLICATIONS• Inside equipment cabinets with DIN rails

• Alongside Industrial Ethernet switches and PLC’s

• Mounting clipscompatible withstandard 35mmDIN rails

• Rugged 16 gauge steel constructionwith a durable black powder finish

SS_SIS_DIN_RevC_C 10/23/14 3:25 PM Page 1

© 2

014

Sie

mon

W W W . S I E M O N . C O M / S I S

Compatible Modules and Outlets

Siemon Interconnect SolutionsWatertown, CT USAPhone (1) 860 945-4213 E-Mail - Customer Service. - SIS_customerservice@siemon.comE-Mail - Technical Support. - SIS_techsupport@siemon.com

DIN Rail Mounted Patch Panel

Note: When using shielded jacks bond other end of link to ground

Contact SIS technical support for additional sizes and configurations not shown

Z-MAX Outlets - Category 5e, 6 and 6A UTP and shielded

MAX Fiber Adapter Modules - LC, SC, ST

MAX Multi Media

Z(XX)-(X)(XX)(X)

Bezel ColorUTP or Shielded

Category

(Blank) = UnshieldedS = Shielded

Door Option(Blank) = No DoorD = Door (Hybrid only)

01= Black02= White03= Red04= Gray05= Yellow

*5e66A

06= Blue07= Green09= Orange20= Ivory80= Light Ivory

MX-F-S2-(XX)*.........

Flat module with 1 duplex STadapter (2 fibers)

MX-F-SC-(XX)*.........

Flat module with 1 duplex SCadapter (2 fibers)

MX-F-SA-(XX) ..........

Flat module with 1 simplex STadapter (1 fiber)

MX-F1-LC(X)-(XX) .......

Flat module with 1 duplex LCadapter (2 fibers)

For additional resource information:Visit our web site at www.siemon.com/SIS

Use (X) to specify LC adapter color: blank = beige, U = blue

Use (XX) to specify color: 01 = black, 02 = white, 04 = gray, 20 = ivory, 25 = bright white, 80 = light ivory

Modules include dust caps, one color-matching, one red, and one blue icon per port.

*These modules can be used only with DIN-PNL-04W-01

DIN-PNL-04-01 ..............................4-port panel, black powder coat

DIN-PNL-04W-01 ..........................Open port panel to accommodate duplexfiber modules, black powder coat

Ordering Information:

MX-F-BA-(XX) .........

Flat module with 1 BNC adapter, 75 ohms

MX-F-FA-(XX)...........

Flat module with 1 F-type adapter, 75 ohms, 2 GHz

Use (XX) to specify color: 01 = black, 02 = white, 04 = gray, 20 = ivory, 25 = bright white, 80 = light ivory

Modules include one color-matching, one red, and one blue icon.

Hybrid outlet includes one printed red, blue, white, black icon set.

*5e available shielded only

MX-F-RC-(XX)..........

Flat module with 1 RCA connectorwith solder tail

UTP Shielded

SIS-

DIN

_RA

IL_C

SS_SIS_DIN_RevC_C 10/23/14 3:25 PM Page 2