Upload
vonhi
View
255
Download
5
Embed Size (px)
Citation preview
PrintPage
PrintChapter
MILANO - TECHNICAL CATALOG
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
GENERAL CHARACTERISTICS FOR FLARED TUBE FITTINGS SAE 37 - JIC
(1) (2)
(3)
Ex. 070426-8-6-8 C
Pressue TUBE THREAD UNFNominal Inch Class 2A(PN) bar
PN 350PN 350PN 250PN 250PN 200PN 200PN 160PN 160PN 125PN 100PN 080
1/4 5/16 3/8 /1 2
5/8 3/4 7/8 1 1.1/4 1.1/2 2
Trace
-4-5-6-8-10-12-14-16
-20 -24-32
7/16 x 201/2 x 209/16 x 183/4 x 167/8 x 141.1/16 x 121.3/16 x 121.5/16 x 121.5/8 x 121.7/8 x 122.1/2 x 12
TABLE PRESSURE, TUBE AND THREAD
The fittings characteristics included on this catalog are similar to standard SAE J846, J514, J515, J531, J518 and DIN EN ISO 8434-2code:The code system used is similar to standard SAE J846, consists of two number groups and a letters group: the first number group identify fittings, the second one symbolizes the sizes identification, and letters group symbolizes the material and assembly, as described below:
FITTINGS SAE IDENTIFICATION:SAE identifies fittings through a six digits number, divided into 3 groups of 2 digits each, representing:a) The fitting’s type;b) The fitting’s format;c) The fitting’s side and combinations.
MATERIAL IDENTIFICATION: The raw material is identified by the letters:B = BRASSC = CARBON STEELS = STAINLESS STEELEx: 070102-8-2 C
ASSEMBLY IDENTIFICATION: Add the letter "A" to request the fitting with its multiple components (body, nut, and sleeve)Ex: 070102-8-2 CAAdd "+ O" to request a fitting with O-ringEx: 070120-8-8 C+OAdd "+ L" to request a fitting with locknutEx: 070601-8-8 C+L
The fitting size is determined by the dash system, each one representing their respective side size. The size of the tube end must precede the thread dimension or the others fitting sides.For fittings with different sizes combination for tube end, the largest tube end must precede the smaller unions, bends and elbows. For "TEEs”, the tube end (1) must be the higher then (2). The traces must be given as the sequency defined below:
Components Steel (C) Brass (B) Stainless(S)
SAE CA 360 SAE 30316
SAE CA377 SAE 30316
SAE 12L14 9SMnPb
Drawn
SAE 10201030 / 1035Forged
Forged Forged
RAW MATERIAL
Body Fitting
linear and nut
Wide Body
Fitting
Drawn Drawn
Material Surface Treatment
Steel (C)
Brass (B) Pickling
Stainless (S) Pickling and Passivation
Surface Treatments:
- Zinc Electrodeposition with blue chromate (Trivalent)Resistance: 96 Hours of Salt Fog
Testing (Salt Spray) ASTM B-117- Rust or Black Phosphating (for
welding items)
ECOLOGICAL SURFACE TREATMENT
The MILANO has been using the treatment of
zinc electrodepositing with blue shade
(Trivalent) environmentally friendly, with the
use of trivalent chromium.
Other information, please consult our Sales or
Technical department.
E-mail: [email protected]
Phone +55 019 2102-2500
Site: www.milano.ind.br
82
83
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
070102..... 070202..... 071502..... 070302.... 070424.... 070425....
TUBE TO MALE NPT
TUBE TO FEMALE NPT
070103..... 070603..... 070203..... 070426.... 070427....
070101..... 070119..... UDLJIC..... 070201.... 070401.... 070501....
TUBE TO TUBE
070601..... 070701..... 070801..... 070958.... 070959.... 070118....
BULKHEAD UNIONS
070120..... 070122..... 070220..... 070320.... 070428.... 070429....
TUBE TO STRAIGHT UNF THREAD
Page 85
Page 86
Page 87
Page 88
Page 89
Male Connector
Female Connector
Male Elbow
Female Bulkhead Connector
Long Male Elbow
Female Elbow
45° Male Elbow
Male Run Tee
Female Run Tee
Male Branch Tee
Female Branch Tee
Union
Bulkhead Union
Connector
Union (higher hex)
Bulkhead Union Elbow
Long Connector
Union (Long)
45° Bulkhead Union Elbow
Elbow
UnionElbow
Bulkhead Run Tee
45° Elbow
Union Tee
Bulkhead Branch Tee
Run Tee
Union Cross
Bulkhead LockNut
Branch Tee
PrintPage
PrintChapter
MILANO - TECHNICAL CATALOG
MILANO - TECHNICAL CATALOG
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
AUXILIARY COMPONENTS
Nut Long Nut Inch Sleeve Cap Plug070110..... 070111L ..... 070115..... 070112.... 070109....
TUBE END REDUCER
One Piece Two Piece070105..... 070123..... (Body)
Assembled with Nut 070110
TUBE TO MALE THREAD
Swivel Nut Elbow
45° Swivel Nut Elbow
Swivel Nut Run Tee
Swivel Nut Branch Tee
070221..... 070321.... 070432.... 070433....
TUBE TO SWIVEL NUT
Notes:
Page 90
Page 91
Page 92
Male AdapterBSP / Metric
Male Swivel AdapterBSP / Metric
Male Swivel AdapterBSP / Metric NPT / BSP TAPER (BSPT)UMJIC........x........ UPG.....UNFx.......UPG......UNFx.......Pag. 93 Pag. 94Pag. 95
MALE SWIVEL ADAPTER
PrintPage
PrintChapter
84
85
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
TThread B
NPT Hex(Ex)
Inch InchTrace Trace
1/29/167/89/169/165/85/8
- 3/4- 7/8
13/1613/167/81.1/815/1615/161.1/81.1/81.1/81.3/81.1/41.3/81.3/4
1.11/161.11/1622
1/41/41/45/165/163/83/83/83/81/21/21/21/25/85/85/83/43/43/47/8111.1/41.1/41.1/21.1/22
- - - 6- - 6- 6- - - - - - - - - - -
161620202424
- 4- 4- 4
55
6
888810101012121214
- - - - - - - 32
Thread A
UNF
class 2A
7/16-207/16-207/16-20/1 2-201/2-209/16-189/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-147/8-141.1/16-121.1/16-121.1/16-121.3/16-121.5/16-121.5/16-121.5/8-121.5/8-121.7/8-121.7/8-122.1/2-12
-
- 2- 4- 8- 2- 4
2- 4
68
- 4- 6- 8- 12- 6- 8- 12- 8- 12- 16- 12- 12- 16- 16- 20- 20- 24- 32
1/8-271/4-181/2-141/8-271/4-181/8-271/4-183/8-181/2-141/4-183/8-181/2-143/4-143/8-181/2-143/4-141/2-143/4-141-11.1/23/4-143/4-141-11.1/21-11.1/21.1/41.1/41.1/22-11.1/2 2.5/8
I
14,014,014,014,014,014,114,114,114,116,716,716,716,719,319,319,321,921,921,922,623,123,124,324,327,527,533,9
L
31,036,042,7 31,036,131,836,336,342,538,938,945,447,043,148,049,552,352,157,1 53,153,558,461,562,268,1 68,179,0
M
22,626,9
- 24,126,926,926,929,031,231,831,833,736,036,836,8
,38 9 42,242,2 -
43,946,046,052,3 52,3
- 59,277,7
M2
18,321,1
- 19,621,121,121,122,022,324,924,925,126,428,228,2
-32,532,5
- 35,337,337,3
-40,4
- 45,256,4
N
19,827,7
- 19,827,722,827,731,037,331,031,037,340,433,037,340,4 40,440,4
- 42,945,250,059,6 60,5
- 67,176,2
N3
29,736,3
-30,7
--
40,1---
46,2---
55,1--
62,0-
67,3-
76,5-
93,7-
104,1122,2
P
9,714,219,09,714,29,714,214,219,014,214,219,019,014,219,019,019,019,023,919,019,023,923,924,624,625,426,2
N2
16,321,8
- 16,321,8 17,0 21,824,1 29,7 24,1 24,129,7 30,5 24,8 29,7
- 30,5 30,5
- 32,332,7 37,6
- 42,4
- 45,053,6
1 - The table codes refers to the fittings in Carbon Steel (C)
To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070102-8-8 S, 070202-8-6 S.
To order Brass (B), remove the letter "C" and put the letter "B". Ex 070102-8-8 B 070302-12-12 B.
PrintPage
PrintChapter
MILANO - TECHNICAL CATALOG
MALE CONNECTOR
070102
Ex. 070102-8-8 C
45° MALE ELBOW
070302
Ex. 070302-12-12 C
A
L
I P
BEX
N2
M2
B
A
MALE ELBOW
070202
Ex. 070202-8-6 C
MALE RUN TEE
070424
Ex. 070424-8-8-8 C
B
A
M
N
A
NM
B
A
M
LONG MALE ELBOW
071502
Ex. 071502-6-8 C
MALE BRANCH TEE
070425
Ex. 070425-8-8-6 C
N3
B
A
M
B
M
M
A A
N
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
MILANO - TECHNICAL CATALOG
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
13/16
1/41/45/165/163/83/83/81/21/21/25/83/43/47/811.1/41.1/22
- 4- 4- 5- 5- 6- 6- 6- 8- 8- 8- 10- 12- 12- 14- 16- 20- 24- 32
7/16-207/16-201/2-20/1 2-20
9/16-189/16-189/16-183/4-163/4-163/4-167/8-141.1/16-121.1/16-121 3/16-12.1.5/16-121.5/8-121.7/8-122.1/2-12
- 2 1/8-27- 4 1/4-18- 2 1/8-27
4 1/4 18- -- 2 1/8-27 - 4 1/4-18- 6 3/8-18- 4 1/4-18 - 6 3/8-18- 8 1/2-14- 8 1/2-14- 8 1/2-14- 12 3/4-14- 12 3/4-14- 16 1-11.1/2- 20 1.1/4-11.1/2- 24 1.1/2-11.1/2- 32 2-11.1/2
11/16-
3/4- -
- - 1-
1.1/8-
1.3/81.1/21.5/8
2- -
30,5-
30,5- -
32,5- -
36,6-
40,1-
44,444,444,445,7
- -
46,7-
46,7--
52,3--
59,4-
67,6-
73,973,478,581,3
--
30,235,329,735,3
-35,637,1
-39,645,648,052,152,352,359,763,266,575,4
27,430,927,430,926,931,233,231,636,136,141,742,148,047,255,159,273,483,8
16,822,416,822,416,822,425,922,425,931,231,231,234,536,141,143,252,860,7
TThread B
NPT I1 L L2 M1 N1AThread
UNFclass 2A EX1 EX2
Inch Inch Inch Inch
Hex Hex
InchTrace Trace
9/163/4 9/163/4 -
3/47/8 -
7/8/1.1 8
1.1/81.1/8 1.3/81.3/81.5/8
22.3/8 2.7/8
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070103-8-8 S, 070603-8-6 S + L.
To order Brass (B), remove the letter "C" and put the letter "B". Ex 070203-6-8 B 070426-8-6-8 B.
PrintPage
PrintChapter
86
FEMALE BRANCH TEE
070427
Ex. 070427-8-8-8 C
A A
B
M1 M1
N1
FEMALE RUN TEE
070426
Ex. 070426-8-6-8 C
A
M1
A
B
M1
FEMALE ELBOW
070203
Ex. 070203-6-8 C
A
B
N1
M1
Onlinequotation
Onlinequotation
Onlinequotation
FEMALE BULKHEAD CONNECTOR
070603
Ex. 070603-8-6 C+L
L
EX2A
B
070 03
FEMALE CONNECTOR
1
Ex. 070103-8-8 C
L2
A
B
EX1Online
quotationOnline
quotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
1/45/163/81/25/83/47/811.1/41.1/22
- 4- 5- 6- 8- 10- 12- 14- 16- 20- 24- 32
7/16-201/2-209/16-183/4-167/8-141.1/16-121.3/16-121.5/16-121.5/8-121.7/8-122.1/2-12
2
1/29/165/813/1615/161.1/81.1/41.3/81.11/16
2.5/8
11/163/413/1611.1/81.3/81.1/21.5/81.7/82.1/82.3/4
34,834,835,841,147,854,956,157,261,769,886,4
22,624,126,931,836,842,243,946,052,359,277,7
T Hex L1 MThread A
UNFclass 2A Ex1 Ex2
Inch Trace Inch
Hex
Inch
87
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C"and put the letter "S". Ex 070101-8-8 S, S 070201-12-12 S.
To order Brass (B), remove the letter "C" and put the letter "B".
Ex 070401-16-16-16 B, 070501-8-8-8-8 B.
PrintPage
PrintChapter
MILANO - TECHNICAL CATALOG
UNION
070101
L1
Ex1
AA
Ex. 070101-6-6 C
UNION TEE
070401
M M
A
M
Ex. 070401-16-16-16 C
UNION CROSS
070501
A
M M
MM
A
Ex. 070501-8-8-8-8 C
UNION (HIGHER HEX)
070119
A
L1
EX2A
Ex. 070119-8-8 C
UNION (LONG)
UDL JIC
2M
Ex1A A
Ex. UDL JIC-6-6 C
UNION ELBOW
070201
Ex. 070201-12-12 C
A
N1
M1
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
MILANO - TECHNICAL CATALOG
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
1/4
5/163/81/25/83/47/811.1/41.1/22
- 4
- 5- 6- 8- 10- 12- 14- 16- 20- 24- 32
7/16-20
1/2-209/16-183/4-167/8-141.1/16-121.3/16-121.5/16-121.5/8-121.7/8-122.1/2-12
11/16
3/413/1611.1/81.3/81.1/21.5/81.7/82.1/82.3/4
30,5
30,532,536,640,144,444,444,445,746,053,1
27,7
39,639,639,6
25,9
25,9
31,835,3
40,941,148,5
2,4
2,42,43,23,23,23,23,23,23,23,2
52,6
52,655,462,069,678,579,279,884,189,4106,7
18,3
19,621,124,928,232,535,337,340,445,256,4
24,6
26,227,734,539,645,247,249,355,159,473,4
40,4
41,146,053,660,767,869,371,179,286,9104,4
38,9
38,942,449,355,162,063,565,067,367,873,9
6,4
6,46,97,99,110,410,410,410,410,410,4
TI1 I2 K1 L4 M2 M3 M4 M9 T1
Inch Trace
Thread AUNF
class 2Aclass 2B
HexEX2Inch
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070601-8-8 S + L, 070701-12-12 S + L.
To order Brass (B), remove the letter "C" and put the letter "B". Ex. 070601-16-16 B + L, 070118-12 B.
PrintPage
PrintChapter
88
BULKHEAD UNION
070601
Ex. 070601-8-8 C+L
BULKHEAD RUN TEE
070958
Ex. 070958-12-12-12 C+L
L4
A A
EX2
I1 0,8
K1I2
M3M4
A M3A
45° BULKHEAD UNION ELBOW
070801
Ex. 070801-8-8 C+L
BULKHEAD LOCKNUT
070118
Ex. 070118-12 C
A
M9
A
I2 K1
M2
EX2
T1
Thread A
BULKHEAD UNION ELBOW
070701
Ex. 070701-12-12 C+L
BULKHEAD BRANCH TEE
070959
Ex. 070959-8-8-8 C+L
I2
M4
K1
A
M3
M3 M3
M4
AA
I2
K1
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
10 7/8-14 1
15,1
- -- -
- -
1/41/41/41/45/163/83/83/81/21/21/21/25/85/85/83/43/43/43/47/87/811111.1/41.1/41.1/41.1/21.1/22
- 4- 4- 4- 4- 5- 6- 6- 6- 8- 8- 8- 8- 10- 10- 10- 12- 12- 12- 12- 14- 14- 16- 16- 16- 16- 20- 20- 20- 24- 24- 32
7/16-207/16-207/16-207/16-201/2-209/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-147/8-141.1/16-121.1/16-121.1/16-121.1/16-121.3/16-121.3/16-121.5/16-121.5/16-121.5/16-121.5/16-121.5/8-121.5/8-121.5/8-121.7/8-121.7/8-122.1/2-12
- 4- 5- 6- 8- 5- 6- 8- 10- 6- 8- 10- 12- 8- 10- 12- 8- - 12- 16- 14- 16- 14- 16- 16- 20- 16- 20- 24- 24- 32- 32
7/16-201/2-209/16-183/4-161/2-209/16-183/4-167/8-149/16-183/4-167/8-141.1/16-123/4-167/8-141.1/16-123/4-16
1.1/16-121.5/16-121.3/16-121.5/16-121.3/16-121.5/16-121.5/16-121.5/8-121.5/16-121.5/8-121.7/8-121.7/8-122.1/2-122.1/2-12
9,1 9,9 11,1
11,1 12,7 9,9
12,7 15,1 11,1
15,1 11,1 12,7
15,1 15,1
15,115,1 15,1
15,1
15,1
9,1
9,19,9
11,1
12,7
15,1
15,1
15,1
15,1
15,1
15,1
22,6-
26,9 -
24,126,929,2
- 31,8 31,834,0
- 36,8 36,838,9
- 42,242,246,0 43,9
- -
46,046,0
- -
52,3-
59,2-
77,7
26,2-
31,8 -
27,731,836,8
- 33,5 36,843,2
- 39,4 43,249,3
- 45,249,352,1 50,8
- -
52,152,1
- -
57,2-
60,7-
73,4
26,7---
26,729,0
---
33,038,6
--
38,6--
40,143,9
-45,7
--
47,2---
48,5-
48,5-
47,2
T
14,014,014,014,014,014,114,114,116,716,716,716,719,319,319,321,921,921,921,922,622,623,123,123,123,124,324,324,327,527,533,9
I I3
35,3- --
36,839,6
--
-47,8
-- -
53,1-- -
63,5 -68,3
72,1 -
- 88,1
- 98,6
- 122,9
I4
17,8-
19,6-
17,819,622,4
-19,622,425,9
-22,425,929,5
-25,929,529,529,5
29,529,5
-,29 5
-29,5
-29,5
I5
31,231,2 33,0 34,8 31,233,035,1 38,1 36,6 37,640,6 44,7 41,7 43,247,2 45,2 46,4 50,050,8 50,551,3 51,8 51,151,8 53,8 59,2 55,156,9 60,264,3 70,6
L5
52,8- --
54,558,7
-- -
68,6-- -
77,2-- -
91,7-
96,5- -
101,1-- -
119,1-
131,3-
159,8
L6 M
18,3- --
19,621,1
-- -
24,925,4
- -
28,2--
32,532,5
-35,3
- -
37,3-- -
40,4-
45,2-
56,4
M2 M7 M8
Thread AUNF
class 2A
Thread BUNF
class 2A
Inch InchInchTrace Trace
9/165/811/167/85/811/167/8111/167/811.1/47/811.1/47/8
1.1/41.1/21.3/81.1/21.3/81.3/81.1/21.7/81.11/161.7/82.1/82.1/82.3/42.3/4
HexEX
89
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S".
Ex 070120-8-8 S + O, 070220-12-12 S + O.
To order Brass (B), remove the letter "C" and put the letter "B". Ex 070320-8-8 B + O, 070220-8-8 B + O.
070429
Ex. 070429-12-12-10 C+O
MM
B
AA
M7
I 5
BRANCH TEESTRAIGHT THREAD
070428
Ex. 070428-12-10-12 C+O
BA
M M7
I5
M
RUN TEESTRAIGHT THREAD
070320
Ex. 070320-8-8 C+O
B
A
M2M
8
I5
ELBOW45° STRAIGHT THREAD
PrintPage
PrintChapter
MILANO - TECHNICAL CATALOG
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
CONNECTOR070120
Ex. 070120-8-8 C+O
A
I
BEX
I3
L5
STRAIGHT THREADLONG CONNECTOR
070122
Ex. 070122-12-12 C+O
AB
EX
L6
I4 I3
STRAIGHT THREADELBOW070220
Ex. 070220-8-8 C+O
M7
M
A
B
I5
STRAIGHT THREAD
MILANO - TECHNICAL CATALOG
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
SWIVEL NUT ELBOW 45° SWIVEL NUT ELBOW
070221 070321
Ex. 070221-8-8 C Ex. 070321-12-12 C
SWIVEL NUT RUN TEE SWIVEL NUT BRANCH TEE
070432 070433
Ex. 070432-8-8-8 C Ex. 070433-12-12-12 C
9/16 22,6 18,3 25,4 23,95/8 24,1 19,6 26,9 25,411/16 26,9 21,1 31,8 28,47/8 31,8 24,9 35,1 32,51 36,8 28,2 41,1 36,61.1/4 42,2 32,5 44,4 38,11.3/8 43,9 35,3 45,2 41,11.12 46,0 37,3 50,8 44,42 52,3 40,4 58,7 51,62.1/4 59,2 45,2 65,8 57,2
1/45/163/81/25/83/47/811.1/41.1/22
- 4- 5- 6- 8- 10- 12- 14- 16- 20- 24- 32
7/16-201/2-209/16-183/4-167/8-141.1/16-121.3/16-121.5/16-121.5/8-121.7/8-122.1/2-12 2.7/8 77,7 56,4 85,9 73,9
TM M2 M5 M6
Inch Trace
Thread AUNF
class 2Aclass 2B
HexEX3Inch
A
A
M
EX3
M5 A
M2
AEX3
M6
A
A
M5M
EX3
M M5
EX3
A
MM
A
A
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070221-8-8 S, 070321-12-12 S.
To order Brass (B), remove the letter "C" and put the letter "B". Ex 070432-8-8-8 B, 070221-8-8 B.
PrintPage
PrintChapter
90
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
91
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
31,0 36,8
1/45/163/81/25/83/47/811.1/41.1/22
4
6810
- - 5- - - - 12- 14- 16- 20- 24- 32
7/16-201/2-209/16-183/4-167/8-141.1/16-121.3/16-121.5/16-121.5/8-121.7/8-122.1/2-12
9/165/811/167/811.1/41.3/81.1/222.1/42.7/8
1/29/165/813/1615/161.1/81.1/41.3/81.11/1622.5/8
25,426,927,732,537,642,246,049,355,658,769,8
10,411,212,714,216,817,319,319,823,128,430,2
15,517,018,321,324,625,927,428,4
35,844,2
20,320,321,323,927,932,533,333,8
41,952,1
TD L L1 L3
Inch Inch InchTrace
Thread AUNF
class class
2A2B
Hex HexEX EX1
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070110-12 S, 070111-12 S.
To order Brass (B), remove the letter "C" and put the letter "B". Ex 070115-8 B, 070109-20 B.
PrintPage
PrintChapter
MILANO - TECHNICAL CATALOG
NUT INCH SLEEVELONG NUT
070111
Ex. 070111L-16 C Ex. 070115-16 CEx. 070110-12 C
070115 070110
CAP PLUG
070109
Ex. 070112-16 C Ex. 070109-20 C
070112
A
L1
EXA
D
EX
L
L1
A
EX EX1
L3
A
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
Onlinequotation
MILANO - TECHNICAL CATALOG
TUBE END REDUCER - ONE PIECE
L
L
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
Ex. 070105-14-10 C
070105
5/8 para 1/23/4 para 5/87/8 para 3/41 para 7/8
- 10 para - 8- 12 para - 10- 14 para - 12- 16 para - 14
36,542,146,748,5
T
Nominal outside diameter of the tube L
Inch Trace
Ex. 070123-10-6 C
ExtremityTo reduce
Reducer
TUBE END REDUCER - TWO PIECE
070123
Nut070110
3/8 para 1/4 - 6 to - 4 24,61/2 para 1/4 - 8 to - 4 25,41/2 para 3/8 - 8 to - 6 25,45/8 para 1/4 - 10 to - 4 26,25/8 para 3/8 - 10 to - 6 26,23/4 para 1/4 - 12 to - 4 27,73/4 para 3/8 - 12 to - 6 27,73/4 para 1/2 - 12 to - 8 30,27/8 para 3/8 - 14 to - 6 28,77/8 para 5/8 - 14 to - 10 33,71 para 3/4 - 16 to - 12 37,31.1/4 para 3/4 - 20 to - 1 38,81.1/4 para 1 - 20 to - 16 40,31.1/2 para 1.1/4 - 24 to - 20 42,9
T
Nominal outside diameter of the tube L
Inch Trace
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S".
Ex 070105-14-10 S, 070123-10-6 S.
To order Brass (B), remove the letter "C" and put the letter "B".
Ex 070105-10-8 B, 070123-20-16 B.
PrintPage
PrintChapter
92
Onlinequotation
Onlinequotation
93
MALE ADAPTER BSP THREAD
MALE ADAPTER METRIC THREAD
UM JIC M
Ex. UMJIC -8XM16X1,5 C
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
UM JIC BSP
Ex. UMJIC -8X1/2 BSP C
21,823,0
1/41/41/45/163/83/81/21/25/83/43/43/4111.1/41.1/41.1/21.1/2
- 4- 4- 4- 5- 6- 6- 8- 8- 10- 12- 12- 12- 16- 16- 20- 20- 24- 24
1/8-281/4-193/8-191/4-191/4-193/8-193/8-191/2-141/2-141/2-143/4-141-111-111.1/4-111.1/4-111.1/2-111.1/4-111.1/2-11
3/47/8
5/83/47/83/4
7/81.1/81.1/81.1/81.3/81.3/41.3/4222.3/822.3/8
14,014,014,014,014,214,216,816,819,321,821,8
23,024,024,027,427,4
7,611,211,211,211,211,211,214,514,514,514,518,518,518,518,518,518,518,5
27,731,533,031,531,833,337,342,243,247,246,754,655,957,758,758,761,761,7
TI I3 L
Inch Trace
HexEXInch
BSPThread
1/45/163/81/25/83/41
- 4- 5- 6- 8- 10- 12- 16
M10x1M12x1,5M14x1,5M16x1,5M20x1,5M24x1,5M27x2
14171922263036
14,014,014,216,819,321,823,0
7,17,68,69,49,910,911,9
29,531,532,537,142,447,050,0
T ThreadMetric I I3 L
Inch Trace
HexEX
Inch
EXA
L
I I3
Metric
EX
A
L
I I3
BSP
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S".
Ex UMJIC 8x1 / 2 BSP S, UMJIC 12XM24X,5 S.
PrintPage
PrintChapter
MILANO - TECHNICAL CATALOG
Onlinequotation
Onlinequotation
MILANO - TECHNICAL CATALOG
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
UPG UNF x BSP
SWIVEL STRAIGHT THREAD CONNECTOR
Ex. UPG 3/4 UNFX3/8 BSP C
1/45/163/83/81/25/83/411.1/4
7/16-201/2-209/16-209/16-203/4-167/8-141.1/16-121.5/16-121.5/8-12
1-11
1/8-28 1/4-19 1/4-19 3/8-19 3/8-19 1/2-14 3/4-14
1.1/4-11
31,536,036,538,040,549,052,057,563,5
15,017,017,518,019,522,524,527,033,5
7,5 11,0 11,0 11,0 11,0 14,5 14,5 18,5 18,5
9/165/811/163/47/811.1/41.1/22
T ThreadBSP
L B I3 ExThread
UNF class 2BInch
EX
L
B I3
BSP
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S".
Ex.: UPG 3/4 UNFX3 / 8 BSP S, UPG 1.1/16 UNFXM24X1,5 S.
UPG UNF x M
Ex. UPG 7/8 UNFXM20X1,5 C
1/4 5/16 3/8 1/2 5/8 3 /4 1 1.1/4
7/16-201/2-209/16-183/4-167/8-141.1/16-121.5/16-121.5/8-12
M10x1M12x1,5M14x1,5M16x1,5M20x1,5M24x1,5M27x2M36x2
32,0 36,0 37,5 41,5 47,5 50,0 56,5 63,0
16,5 19,0 19,0 21,0 24,5 25,0 29,0 33,5
8,59,010,011,012,013,014,016,0
9/165/811/167/811.1/41.1/22
T ThreadMetric L B I3 Ex
ThreadUNF
class 2BInch
EX
L
B I3
Metric
SWIVEL STRAIGHT THREAD CONNECTOR
PrintPage
PrintChapter
94
Onlinequotation
Onlinequotation
95
DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS
1 - The table codes refers to the fittings in Carbon Steel (C).
To order Stainless Steel (S), remove the letter "C" and put the letter "S".
Ex UPG 3/4 UNFX3/8 BSPT S, UPG 1.1/16 UNFX1/2 NPT S.
UPG UNF x BSPT
Ex. UPG 3/4 UNFX3/8 BSPT C
1/4 5/16 3/8 1/2 1/2 5/8 3/4 3/4 1 1 1.1/4
7/16-201/2-209/16-183/4-163/4-167/8-141.1/16-121.1/16-121.5/16-121.5/16-121.5/8-12
1/4-191/4-191/4-191/4-193/8-191/2-141/2-143/4-143/4-141-111.1/4-11
34,0 37,0 37,5 40,0 40,0 48,5 51,0 52,5 57,0 60,0 67,0
13,5 15,0 15,5 17,0 17,0 19,5 21,0 21,0 24,0 24,0 28,5
12,0 12,0 12,0 12,0 12,0 16,0 16,0 17,5 17,5 20,5 22,5
9/165/811/167/87/811.1/41.1/41.1/21.1/22
T Thread
BSPT L B P Ex
Thread A
UNF class 2BInch
A
L
B P
BSPTEx
SWIVEL STRAIGHT THREAD CONNECTOR
UPG UNF x NPT
Ex. UPG 7/8 UNFX1/2 NPT C
1/4 5/16 3/8 3/8 1/2 5/8 5/8 3/4 3/4 1
7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/8-14 7/8-14 1.1/16-12 1.1/16-12 1.5/16-12
1/4-18
1/4-18 3/8-18
1/4-18
3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14
37,0 40,0 40,4 40,4 42,9 47,5 52,0 54,6 54,6 59,2
13,515,015,515,517,019,519,521,021,024,0
14,214,214,214,214,214,219,019,019,019,0
1.1/4
9/165/811/163/47/811
1.1/41.1/2
T Thread A UNF
ThreadNPT L B P Ex
class 2BInch
A
L
B P
NPT
Ex
SWIVEL STRAIGHT THREAD CONNECTOR
PrintPage
PrintChapter
MILANO - TECHNICAL CATALOG
Onlinequotation
Onlinequotation