DIN 2440 & DIN 2441. Steel Tubes; Medium-Weight Suitable for
Screwing & Heavy-Weight Suitable for Screwing
Hot-formed|
Nominal Diameter(ND): 6, 8, 10, 15, 20, 25, 32, 40, 50, 65, 80,
100, 125 mm(1/8,1/4,3/8,1/2,3/4, 1, 11/4, 11/2, 2, 21/2, 3, 4, 5
inch)
Outside Diameter(OD): 10,2 139,7 mm
Wall Thickness: DIN 2440: 2 4,6 mm; DIN 2441: 2,65 5,40 mm
Notes:1. Steel Grade St 332. Length up to 9 m.3. "Black" pipes
(without thread).4. ND 6 20 mm pipes are cold-formed, and ND 25 125
mm hot-formed.5. Mechanical properties according to DIN 17100.6.
Test certificates according to DIN EN 10204.
DIN 2440 & DIN2441. Steel Tubes; Medium-Weight Suitable for
Screwing & Heavy-Weight Suitable for Screwing
Welded Pipes
Nominal Diameter: 10, 15, 20, 25, 32, 40, 50, 65, 80, 100
mm(3/8,1/2,3/4, 1, 11/4, 11/2, 2, 21/2, 3, 4 inch)
Outside Diameter: 17,2 114,3 mm
Wall Thickness: DIN 2440: 2,35 4,50 mm; DIN 2441: 4,50; 4,85
mm
Notes:1. Steel Grade St 332. Length up to 9 m3. "Black" pipes4.
Mechanical properties and chemical composition as for hot-formed
pipes
