Dillon's Blue Press, Nov 2014

Blue PressBlue PressNovember 2014$2.95 U.S./$3.95 Canadathe

INTRODUCING:

Dillon’s RapidTrim1500Case

TrimmerPage 23

INTRODUCING:

Dillon’s RapidTrim1500Case

TrimmerPage 23

DP

Which Dillon

is Right for

YOU?Page 6

Which Dillon

is Right for

YOU?Page 6

Dillon’s RF 100Automatic Primer FillerDillon’s RF 100Automatic Primer Filler

Eliminates the need for primer pick-up tubes!

Fills the primer tube while you reload!

Clear polycarbonate shieldand protective housing

Dillon’s RF 100 Automatic PrimerFiller eliminates the task of fill-

ing primer pick up tubes. Now yousimply pour your primers from theirbox into the top, press the blue but-ton and watch it run!

In about two minutes the primersare inside the protective metal hous-ing. That’s about 30 rounds you canload while the RF 100 is doing yourwork for you!

The RF 100 is available for eitherlarge or small primers, and conver-sion kits are available at one lowprice of $47.95 each.Lg. Primer Filler K95-97077 $317.95Sm. Primer Filler K95-97111 317.95Lg. (Euro. 220v) K95-97112 327.95Sm. (Euro. 220v) K95-97113 327.95Sm. Conversion K95-17903 47.95Lg. Conversion K95-17902 47.95Nylon Packcloth Dust Cover K95-11143 14.95

3

Idon’t make it a habit of writing to magazine/catalogpublishers, and even though my computer – with its

word processor – recently passed on to The GreatBeyond, I’m entertaining this undertaking with somenervousness. In a recent magazine article, Massad Ayoobcommented that Mike Dillon had a habit of selling onlythe finest products out there. After ordering from your cat-alog for not too many years, I’ve been most impressed aswell as satisfied with every item I’ve purchased from you,especially the latest ones: Dillon Leather by Mitch Rosenholsters. Top quality without paying an arm and a leg!And I’ll bet you thought I wanted your catalog/magazinesolely for its cover.

Don Mitchell – Selma, AL

Iwant to recognize the outstanding customer supportrendered to me recently by your support team, especial-

ly Eric Harvey. My RF 100 Primer Filler began to jamprimers into the feed ramp, causing primers to stop fallinginto the primer tube, or – worse yet – flip upside down,resulting in my Super 1050 loading a round with anupside down primer. Most frustrating! Eric was able todiagnose the problem and proceeded to send me a com-plete RF 100 update kit at no cost. The directions formodifying my venerable electric primer filler were clearand easy to follow. After a follow up telephone call withEric, for a minor shim adjustment to the stabilizer plate,I’m back in business with a tool working better than itever has. Thanks for products that lead the industry inaccuracy, reliability and customer support.

Ralph Talbot – San Antonio, TXThanks for the feedback, Ralph. We recognize that unlesswe provide good customer support, sooner or later we’llrun out of customers!

Here is another appeal for you to re-publish your arti-cles under separate cover. I’m sitting at my desk, cut-

ting back issues of The Blue Press to get the reviews, JohnMarshall’s articles, Brian Dillon’s articles and other inter-esting articles. It saves room on my terminally crowdedbookshelves, but I would cheerfully find a way to makeroom for a bound collection of Blue Press articles andtech reviews!

Enid Lynch –Hatton, NDEnid, we’re taking baby steps in that direction with thepublication of John Marshall’s book, 101 Classic Firearms.I’d love to do a compilation of Brian’s articles about hisgrandfather, Peter Caroline’s memoirs and a collection ofDuane Thomas’ shooting tips, but the guy who signs thecheck for the printing bill needs to know they’ll sell! Let’ssee how Blue Press readers respond to John’s book.

4

Michael J. Dillon - PublisherMark G. Pixler - Editor

[email protected] Kieft - Technical EditorContributors:Peter CarolineBrian Dillon, Ph.D.John Marshall

Robin TaylorDuane ThomasBarrett Tillman

All the electrical and/or electronic components of Dillon equipment and all Dillon textiles are covered by a one-year

warranty from date of purchase. Any modifications performed to Dillon machines, or the addition of any unapproved

equipment, including automated or mechanical add-ons fromother manufacturers, is expressly not recommended and

will void the Dillon warranty.

Issue #269November2014

Copyright 2014 byDillon PrecisionProducts, Inc.

What’s Inside:

THEBLUE PRESS

Product Index

Let’s Quit Smoking(and get the lead outwhile we’re at it)

Page 36

A SimpleSolution

Page 10

Jordon Castro –A New Face

in a New GamePage 48

Dillon Precision Products Reloading Machines:BL 550, Pg. 13; Square Deal B, Pg. 8; RL 550B, Pg. 14;

XL 650, Pg. 20; SUPER 1050, Pg. 30; SL 900 Shotshell Loader,Pg. 38; and “Big Fifty Reloader, ” Pg. 50

RF 100 Automatic Primer Filler 3Vibratory Case Cleaners 18Case/Media Separators 18Dillon Progressive Reloading Dies 34-35Redding Reloading Dies 52Dillon Reloading Scales 86Reloading Components 42-43Books & Videos 82-83Ear & Eye Protection 11-12, 33Dillon Ammo Boxes & Bins 64Dillon Leather by Mitch Rosen 24-25Concealed Carry Tote/“Plan B” Day Planner 47Range Bag/Border Shift Ammo Bag/Pistol Cases 32Targets and Target Stands 54Firearms Maintenance 66-67Tools 53Shooting Accessories by Manufacturer:Arredondo Accessories 33, 39, 59Blade-Tech Industries Holsters, etc. 28California Competition Works 37, 40, 56, 57CED Chronograph/Timer 85Check-Mate Magazines 69, 70Chip McCormick Magazines 68C-More Sights 76Comp-Tac Holsters 29Dewey Cleaning Supplies 67Hogue Handgun Grips 60International Handgun Leather 27Lone Wolf Distributors 58MagPul AR-15 Magazines/Accessories 72-73Mec-Gar Pistol Magazines 70Mernickle Holsters 22ProMag Rifle Magazines 70Safariland Holsters 29, 57Streamlight Tactical Lights 60The Wilderness Tactical Products 26, 27Wilson Combat Magazines, Parts 68Wise Company Gourmet Freeze Dried Food 83

We READ Our Mail!

5

6 Which Dillon is Right for YOU?

800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com

SQUARE DEAL B RL 550B XL 650 SUPER 1050COST Base price $379.95 $439.95 $566.95 $1719.95 Caliber Conversion price range $85.95-95.95 $45.95-55.95 $77.95-87.95 $121.95-201.95RATE Cyclic rate (Rounds per hour) 400 550 1000** 1200 One hour production rate 350 500 800** 1000 Caliber change time 10 min 5 min 10 min 20 minFEATURES Number of stations 4 4 5 8 Auto index yes no yes yes Auto Casefeeder no optional optional standard Uses standard (7/8” x 14) dies no yes yes yes Powdercheck System no no optional optional Primer Early Warning System standard standard standard standard Failsafe Powder System standard standard standard standard Separate Crimp Station yes yes yes yesSPECIFICATIONS Primer magazine capacity 100 100 100 100 Casefeed capacity (.38/.223) N/A N/A 600/500 600/500 Powder measure capacity 3/4 lb 3/4 lb 3/4 lb 3/4 lb Shipping weight 17 lbs. 25 lbs. 36 lbs.* 66 lbs. Height required above bench*** 34 in. 35 in. 44 in. 43 in. Benchtop overhang required*** 1-3/4 in. 3/4 in. 3/4 in. NoneCALIBERS Pistol .32 S&W - .45 Colt All common All common All common Rifle N/A All common All common .223 - .30-06*XL 650 weighs 47 lbs. with optional Casefeeder. **With optional Casefeeder. ***Without optional Strong Mount.

Dillon Progressive Loading Machines: Facts & Figures

SQUARE DEAL BOur automatic-indexingprogressive reloader

designed to load moderatequantities of common

handgun calibers from .32S&W to .45 Colt. It comesto you from the factory setup to load one caliber.

RL 550BThe most versatile reloaderavailable, capable of load-ing over 160 calibers. Anautomatic casefeeder isavailable for handgun

calibers. Manual indexingand an optional magnumpowder bar allow you toload magnum rifle calibers.

XL 650Truly the state of the art,our XL 650 features auto-matic indexing, an optionalautomatic casefeeder anda separate station for anoptional powder-level sensor. Available in all popular pistol and rifle

calibers.

SUPER 1050Our commercial-grade

reloader includes a swagerto remove the crimp frommilitary primer pockets,and is capable of reloadingall the common handguncalibers and several popular rifle calibers.

Page 8 Page 14 Page 20 Page 30

Which Dillon is Right for YOU?

HP1 Electronic Hearing Protector• Protection Rating NRR 21• External battery compartment • Auto shut off extends battery life• Extra-deep, replaceable ear pads • Separate volume controls for each ear• TRUE stereophonic sound• Collapsible for ease of storage• One-year warranty on electronics

HP2Non-Electronic

Hearing Protector

Dillon Hearing ProtectorsHP1 (NRR 21) Electronic Hearing Protector, Blue K95-10157 $135.00HP1 Electronic Hearing Protector, Black K95-10156 135.00HP2 (NRR 21) Non-Electronic Hearing Protector, Blue K95-10361 19.95HP2 Hearing Protector, Black K95-10360 19.95HP1/HP2 Replacement Ear Cushions K95-19022 10.00Hearing Protector Belt Clip K95-13020 3.29

HearingProtectorBelt Clip

Dillon’s HP1 Electronic Hearing Protectoramplifies weak sounds while at the same

time blocking out loud, harmful noise. Dur-ing loud noises, the HP1 maintains a com-fortable level of sound transmission – HP1Hearing Protectors are designed to nevercompletely shut off. The Dillon HP2 FoldingHearing Protector is comfortable to wear forextended periods and folds for easy storagewhen not in use.

8

SQUARE DEAL ‘B’SQUARE DEAL ‘B’

“SDB” Stock Numbers.32 S&W Long/H&R Magnum*K95-16815 $409.95.380 ACP K95-20053.38 Special K95-20102.357 Magnum K95-20103.38 Super K95-20099.38 Super Comp K95-201159mm K95-20104.40 S&W K95-2078710mm K95-20643.41 Magnum K95-20054.44 Special K95-20105.44 Magnum K95-20052.44-40 Winchester K95-21036.45 ACP K95-20101.45 Colt K95-20051.45 GAP K95-20098.45 S&W Schofield K95-20418

Total price as pictured here with optional accessories below: $555.75

SDB Strong Mount K95-22223 $64.95Low Powder Sensor K95-16306 $41.95Aluminum Bullet Tray K95-22214 $41.95SDB Tool Holder with Wrench Set K95-19441 $26.95

STANDARD FEATURES:• Automatic Indexing• Available in 18 Handgun Calibers• Loading Rate: 400-500 Rds./Hr.• Comes With One Caliber Conversion• Automatic Powder Measure• Automatic Primer System• Comes Complete With Dies• Factory Adjusted, Ready-to-Use• Lifetime “No-B.S.” Warranty

All for ONLY...$37995*

SDB DVD Instruction ManualK95-19482 $19.95

9

g. MACHINE COvERThis great looking nylon coveradds security to your loadingbench. Your reloader will be pro-tected against more than dust asthese covers come with a D-ringthat allows the heavy duty zipperto be locked.Machine Cover,K95-13795, $23.95 (H.) Master lock,K95-13083, $3.95

SQUARE DEAL ‘B’ ACCESSORIES

B. SqUARE DEAL ‘B’TOOLHEADExtra toolheads keepall your adjustmentsthe way you leftthem.K95-20113, $31.95

B.

I. LOW POWDER SENSORProvides an audible and visualreminder when it’s time to refillyour powder reservoir. When thepowder level drops to about 1000grains, a buzzer will sound and abright red LED will light.

K95-16306, $41.95

I.

J. MACHINEMAINTENANCEKITEverything youneed to keep yourDillon loadercleaned and lubri-cated up to factoryspecifications.Available in combi-nation with a spareparts kit for your machine.

Maint. Kit/SDB Spare Parts Kit K95-97015, $35.95

C. SqUARE DEAL BENCH WRENCHThe Square DealBench Wrenchhas the correctsizes for SquareDeal “B” dieadjustments.K95-19970,$8.95 each. Buy

two or more, $8.10 each.

C.

J.

H.

G.

K. SDB SPARE PARTS KITDon’t risk downtimewaiting for a replace-ment part!1 SD Shellplate Bolt1 SD Ejection Wire4 SD Wave Bearings1 Toolhead Friction Plate2 Pistol Decapping Pins1 Small Primer Seat Punch1 SD Slide Return Spring1 #10 Tinnerman Insert1 Bellcrank Cube4 Locator Pins (#1, #2, #3, #4)1 Indexer Return Spring1 Large Primer Seat Punch1 Primer Seat Punch Spring2 Pickup Tube, Small, Yellow Tips

2 Magazine Orifices, Large2 Pickup Tube, Large, Green Tips1 3/16” Index Ball2 Magazine Orifices, Small2 Retaining Clips1 SD Index Lever Assembly2 Dispensing Tips, Large2 Dispensing Tips, Small

K95-20778, $21.95

A. SqUARE DEAL ‘B’ CONvERSION KITS Change from onecaliber to anotherin minutes. Con-version includescarbide size die(except .44-40),expander/ powderfunnel, seat die,crimp die,shellplate andlocator buttons. .32 S&W Long/H&R Mag. K95-16774 $95.95(.32 S&W Requires X-Small Powder Bar K95-20780 $29.95)

.380 ACP K95-20246 85.95

.38 Special K95-20240 85.95

.357 Magnum K95-20240 85.95

.38 Super K95-20229 85.95

.38 Super Comp K95-20275 85.959mm K95-20241 85.95.40 S&W K95-20469 85.9510mm K95-20469 85.95.41 Magnum K95-20247 85.95.44 Special K95-20242 85.95.44 Magnum K95-20242 85.95.44-40 Winchester K95-21035 85.95.45 ACP/.45 GAP K95-20123 85.95.45 Colt K95-20248 85.95.45 S&W Schofield K95-20417 85.95SqUARE DEAL ‘B’ qUICK CHANgE (Not Pictured) Toolhead and powder measure. K95-16378, $98.95‘SDB’ POWDER MEASURE K95-20001, $76.95

A.


D. CARTRIDgE CASE BIN & BRACKETErgonomicallydesigned to cut yourworkload througheconomy of motion!Attaches to all Strong-Mount-equippedSDBs.K95-11672, $24.95

E. PRIMER PICKUP TUBESUsed to transfer primersfrom flip tray to primingsystem.1 Lg. tube K95-22029 $7.991 Sm. tube K95-22028 7.992 Sm., 2 Lg. K95-20056 23.954 Lg. tubes K95-20050 23.954 Sm. tubes K95-20049 23.95

F. PRIMER FLIP TRAyA heavy, high-quality tray large enough for theFederal primer package. K95-13606, $20.95 each

E.

F.

D.

10

DP

Reviewed by Peter CarolineI was walking along the firing line at Shootists

Holiday 2014, checking out the vast array of guns,when I came upon an unusual shooting bench.Initially, it appeared to be too simple and compactto be effective, but after watching it in use, I wasfascinated. The tag on the top surface identified itas a “Model 2000 Portable Shooting Bench” fromKnothole Designs in Alva, Wyoming. Later, Igoogled Knothole Designs, and called up the pro-prietor, Jim Gotsch. Mr. Gotsch is One Of Us; heexplained that hedeveloped hisportable bench as alegitimate excuse tospend more time atgun shows. Hisprice for the benchwas most reason-able: $100, plusshipping, which formy Zip code turnedout to be about$21. I promptlyordered one forreview.

Several dayslater, FedEx deliv-ered a large flatpackage. I’ll admit,I was initially a bitapprehensive. Someyears back, I hadpurchased a foldingmetal shootingbench, allegedlyportable. It weighedjust a bit less thanmy pickup truck,and the set-up wasreminiscent of aChinese puzzle, involving pressing several spring-loaded buttons at once, and the creative use ofAnglo-Saxon obscenities. Folding it up again fortransport and storage involved more of the same.The procedure became less arduous with practice,but not much.

The Knothole Designs bench was a wholly dif-ferent animal. Within five minutes of the FedExguy’s departure, I had the bench completelyassembled in my living room. But there is a secret.Included with the bench, there is a set of instruc-tions, with photo illustrations, even. The secret isto read the instructions. They are very simple andstraightforward. Only five wingnuts are employedin order to put the whole unit together. There areeven two extra wingnuts screwed to the bottom ofthe bench, in case you misplace one of the origi-nals. The only way you can mess up is if you startunscrewing anything that isn’t a wingnut. The

moral of this story is: Read The Freakin’ Manual!According to the specifications on Mr. Gotsch’s

website, the assembled bench weighs just 32pounds, overall height is 32”, seat height is 16”and the top surface is 18” x 48”. Seat dimensionsare 12” x 16”. Seat capacity is 350 pounds. Thetop and seat are made from 3/4” Grade AB fir ply-wood, with a deck stain finish. A couple of notch-es cut in the top accommodate long guns. Thesturdy metal parts are powder coated. Fortunatelyfor me, the bench is available in one’s choice of

right or left handconfiguration.

Now, you mightwell ask, “Howsteady can a 32-lb.bench be?” Theanswer is, it’s not a32-lb. bench whenyou’re sitting on theseat. Your weightpins the bench tothe ground, creatinga bench/shooter unitthat weighs 200 lbs.or more. The doubletripod design allowsit to be steady onuneven ground, butyou might want tocarry a few smallwood blocks if yourequire a level sur-face.

Several dayslater, I took theModel 2000 benchout to my favoriteshooting spot in thedesert. The best partof having one’s own

portable shooting bench is, any (unpopulated)location can become your own target or varmintrange. My shooting buddy, Jim Sanchez, and I putthe bench through its paces with both rifles andpistols, and we can both testify to its solidity andstability. You don’t have to climb over any structur-al members to get into position; you just sit down.It was quick and easy to set up from its folded-flatconfiguration, and just as easy to take down andstow flat under the truck bed cover.

If your local gun club range is too distant, toocrowded, too expensive or non-existent, the Knot-hole Designs Model 2000 portable shootingbench is a practical and affordable alternative. Itotally recommend it.

Knothole Designs, LLC • 160 Buck Creek TrailAlva, Wyoming 82711 • 307-467-5635

www.knotholedesigns.comemail: [email protected]

A SIMPLE SOLUTIONKnothole Designs Model 2000 Portable Shooting Bench

11

Pocket Carry: Better Pockets - Not Smaller GunsConstant Companion Clothing is Designed for Pocket Carry of Duty Guns

For years, gun owners have been compromis-ing on small pocket pistols that are comfort-able to carry, but lack the capacity and power

of duty guns. “I tried a variety of concealmenttechniques and found that pocket carry was the

most comfortable and accessibleway for me to carry, but I did notwant to compromise on fire-power,” said company founder,Brandon Trevino. “I knew what Ineeded was not just a biggerpocket, but a better pocket.”

The Constant Companionclothing line features a frontpocket that is over 16” deep andconstructed from ballistic nylon.It’s lint free, snag free, paddedand contoured to maintain the up-right orientation of your weapon.Unlike traditional pants, the gun

rests on your outer thigh, rather than on the top ofyour leg, making it easier to move and sit, while thecargo pocket prevents printing. The pants allow forrapid one-handed access to most full-sized andcompact handguns. The pants are Made in the USAand available online at www.concealedcargo.com.

Dillon Precision announces the release ofJohn Marshall’s new book 101 Classic

Firearms: A Chronological Foray into thegolden years ofFirearms Develop-ment, a compilation ofthe author’s populararticles appearingin The Blue Press since2007.

101 ClassicFirearms is sure to be awelcome and prizedaddition to the libraryof any serious firearmsaficionado.

Published by DillonPrecision, and printedand bound in theUSA, 101 ClassicFirearms is a high-quality full color11.5” x 9” hardcover with224 pages packed full of insights and history on

some of the world’s most important firearms. About the Author: John Marshall is an

accomplished photogra-pher and freelancewriter whose articleshave appeared in TheBlue Press, GunDigest, Guns & Ammo’sHandguns, and Ameri-can Gunsmith. Anexpert on firearms, he isalso a member of theRemington Society ofAmerica, the Smith &Wesson Collectors Asso-ciation, the Smith &Wesson Historical Foun-dation and the Ameri-

can GunsmithingAssociation. He isalso an endow-ment member ofthe National Rifle

Association.

101 Classic Firearms by John Marshall

Price: K95-40133 $29.95, Autographed K95-97130 $34.95

Bomber GlassesBomber GlassesBomber Glasses’ lenses andframes are made from High-Index Polycarbonate that isdurable, flexible and impactresistant. All colors provideUV protection.

Clear K95-10513 Smoke K95-10514 Light Blue K95-10515Yellow K95-10516Amber K95-10517Smoke Mirror K95-10518

$999

MAX Earplugs

Ear Pro EP3 Sonic Defenders®

by SureFire® protect youagainst loud, harmful noises, yetallow normal conversations tobe heard; and the soft, hypoal-lergenic polymer provides all-day comfort. NRR 24Sm. EP3 Sonic DefendersK95-25340 $12.95

Med. EP3s (Fit Most People)K95-25341 $12.95Lg. Sonic DefendersK95-25342 $12.95

EP3 Sonic DefendersBy SureFire

Smith & WessonFoam Earplugs

WinchesterHearing Protection

200 PairK95-19551 $29.99

NRR 33 200 PairK95-10456 $40.00

Pink Corded Ear PlugsK95-19670 $1.99


12

WILEY X PROTECTIVE EYEWEARABSOLUTE. PREMIUM. PROTECTION.

WILEY X PROTECTIVE EYEWEAR MEETS ANSI, EN166 AND MILITARY VO BALLISTIC STANDARDS

Romer 3 $953-Lens Pkg., Smoke Grey, Clear,

Light Rust K95-12104

WX Valor $953-Lens Pkg., Smoke Grey, Clear,


WX Saint $953-Lens Pkg., Smoke Grey, Clear,


$25995

K95-15399Reloading Dies and Caliber Con-

versions sold separately (see the back of the order blankin the center of The Blue Press).

Pictured with optional accessories:Strong Mount K95-22051 $47.95

Dillon’s RL 550B has long worn the title of “TheWorld’s Most Versatile Progressive Reloader,” and

stripping it down to its most basic form – Dillon’s BL(Basic Loader) 550 – adds a whole new dimensionof versatility for the shooter/hunter who needs tofeed several rifles.

The BL 550 is essentially an RL 550B without theautomatic priming and powder systems. Capable ofloading over 160 calibers – just like the RL 550B – ituses any manufacturer’s standard 7/8” x 14 reloadingdies. It’s priced comparably with other manufacturers’turret presses; yet unlike them, it’s fully upgradeableto Dillon’s Progressive RL 550B loader!

The interchangeable toolhead (Page 15) makes itquick, easy and inexpensive to change calibers. Forexample, if you load .30-06 for elk, .243 for deer and.22-250 for coyotes, you don’t even have to changethe shellplate. You simply pull two pins and swap thetoolhead with your .30-06 dies to another toolheadwith your .22-250 or .243 dies in less than 30 sec-onds! The additional toolheads are $22.95 each, or$20.95 each if you buy three or more – if you load forseveral rifles it’s a no-brainer! Once you get your diesadjusted, you’ll never have to re-set them.

A powder measure adapter (bottom right photo) isavailable if you want to use a manual measure thatyou already own. Or, if you want to weigh everypowder charge you load, it’s easy – you can use apowder trickler with the powder die/funnel assemblythat comes with the BL 550.

BL 550Dillon’sBasic Loader

BL 550Dillon’sBasic Loader

POWDER MEASUREADAPTER

If you load rifle car-tridges with long-grainextruded powder, you cannow use any manufactur-er’s powder measure with7/8” x 14 threads on yourRL 450, AT 500, BL 550 orRL 550B. (Requires theuse of an RL 450 powderdie – see below.)

K95-20029, $22.95RL 450 Powder Die: K95-20308, $21.95

AUTO EJECT SySTEMGreatly increases your

ammo production capabilitiesand adds a CartridgeChute/Bracket and a CartridgeBin to your reloader.

K95-22120, $30.95

PRIMER SySTEM EARLy WARNINg KITAllows you to focus on loading instead

of worrying about failing to seat a primer,and is an easy slip-on attachment to theauto prime system.

K95-20302, $25.95

AUTO PRIME SySTEMIncludes:Primer Housing /ShieldPrimer Slides, Large/SmallPickup Tubes, Large/SmallPickup Tube Tips, Large/SmallMagazine Tubes, Large/SmallMag. Orifices, Large/SmallOperating RodPrimer Track BearingHousing ScrewsRet. Spring Retaining Pin

K95-16627, $82.95

AT 500 POWDER DIE

Extra powder dies allow you tomove your powder measure from tool-head to toolhead without changing the“belling” adjustment.

Powder Die: K95-16629, $19.95Oversize Die: K95-16626, $19.95Plastic Funnel: K95-16617, $5.95

Spares, Accessories & Upgrades for AT 500s, BL 550s & RL 550Bs

AUTO POWDER SySTEM Accurate to within 0.1 grain,

our Automatic Powder Measure isworld renowned for its charge-to-charge consistency.

K95-20251, $87.95OPTIONAL MAgNUM RIFLE POWDER BAR

K95-21353, $29.95

13


14

STANDARD FEATURES:• Accommodates Over 160 Calibers• Uses Standard 7/8” x 14 Dies• Loading Rate: 500-600 Rds./Hr.• Comes With One Caliber Conversion• Interchangeable Toolhead Assembly• Automatic Powder Measure• Automatic Primer System• Lifetime “No-B.S.” Warranty


K95-14261Reloading dies sold separately.

*Prices vary on exotic-caliber machines.

Total Price as pictured here with optional accessories: $736.60

.45 ACP Die Set K95-14404 $63.95Strong Mount K95-22051 $48.95Alum. Roller Handle K95-17950 $45.95Low Powder Sensor K95-16306 $41.95Aluminum Bullet Tray K95-22214 $41.95RL 550 Toolholder with Wrench Set K95-11541 $28.95Cartridge Case Bin/Bracket K95-11185 $24.95

RL 550BRL 550BRL 550B DVD

Instruction ManualK95-19483 $19.95

I. PRIMER FLIP TRAyK95-13606, $20.95 each

J. PRIMER PICKUP TUBES1 Lg. tube K95-22029 $7.991 Sm. tube K95-22028 7.992 Sm., 2 Lg. K95-20056 23.954 Lg. tubes K95-20050 23.954 Sm. tubes K95-20049 23.95

A. RL 550B CALIBER CONvERSION KITS Contains:Shellplate, powderfunnel and locatorbuttons. Availablein all calibers;please specify cal-iber desired.K95-RL550B CON-

VERSION $45.95 (Exotic calibers, $55.95)

F. TOOLHEAD STANDSThe ultimate in conven-ience for keeping yourreloading bench clean anduncluttered.K95-22055, $20.95 eachThree or more, $18.95 ea.

B. AUTO POWDERMEASURE SySTEMSAdditional powdermeasures stay on thetoolhead. Never changepowder measurementsagain!RL 550 Powder Measure K95-20782, $76.95 ea.Magnum Rifle Powder BarK95-21353, $29.95 eachX-Small Powder BarK95-20780, $29.95 each

C. DELUxE qUICKCHANgE ASSEMBLyWith a quick changeassembly and a caliberconversion kit (SOLDSEPARATELY), you can convert in less than aminute. Complete with:• Toolhead• Powder Measure• Powder Die• Toolhead StandPrice without Dies, K95-22058, $103.95Loading dies sold separately on Pages 34, 35 & 52.

E. TOOLHEADSDon’t adjust dies when switching calibers.These precision tool holders hold your dies inperfect alignment, making caliber changesquick and easy.

K95-13909, $22.95 each Three or more, $20.95 ea.

N. EqUIPMENT DUST COvERSThis packcloth nylon machine covercomes equipped with a D-ring, allow-ing the heavy duty zipper to be locked.RL 550B Cover, K95-13795, $23.95(O.) Master lock, K95-13083, $3.95Quick-Change Cover (for use with powder measure)K95-11143, $14.95

A.

B.

C.

F.

J.

I.

N.

O.

g. 1” BENCH WRENCHK95-10842, $7.95 eachTwo or more, $7.10 ea.

G.

D. POWDER DIESExtra powder dies allow you tomove your powder measurefrom toolhead to toolheadwithout changing the “belling”adjustment.

K95-20064, $11.35 eachThree or more, $10.25 ea.X-Large Powder Die, K95-21253, $19.95 each

E.

D.

L. MACHINE MAINTENANCE KITProvides you with everythingyou need to keep your Dil-lon loader cleaned and lubri-cated up to factory specifica-tions. Available in combina-tion with a spare parts kit foryour machine.

Maint. Kit & RL 550B Spare Parts Kit K95-97016, $32.95

M. LOW POWDER SENSORProvides an audible and visualreminder when it’s time to refillyour powder reservoir. When thepowder level drops to about 1000grains, a buzzer will sound and abright red LED will light.

K95-16306, $41.95

M.

K. 550 SPARE PARTS KIT1 Seating Punch, Small1 #10 Tinnerman Insert1 Primer Cup, Large1 Primer Cup, Small1 Bellcrank Cube1 3/8” Index Ball1 550 Brass Tip Set Screw1 550 Ejector Wire1 Cartridge Retaining Spring1 550 Slide Return Spring4 Locator Pins (#1, #2, #3, #4)1 Seating Punch, Large1 550 Index Ball Spring2 Pickup Tube, Small, Yellow Tips2 Magazine Orifices, Large1 Toolhead Pin

2 Pickup Tube, Large, Green Tips2 Magazine Orifices, Small1 550 Primer Cup Spring2 Retaining Clips2 Dispensing Tip, Large 2 Dispensing Tip, Small1 Failsafe Bushing Rev. B

K95-20048, $18.95

K.

RL 550B ACCESSORIES

P. UNIvERSAL MOUNTINg HARDWARE KITIncludes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4Flat Washers, 4-Fender Washers, 2-Wood Screws.

K95-14355, $5.49

H. RL 550B CASEFEEDER UPgRADEAvailable for most pistol cartridges –will not work with rifle cartridges. Large Pistol K95-14450Small Pistol K95-14451

$254.95 (110v US Model)Large Pistol K95-14453Small Pistol K95-14454

$264.95 (220v Euro Model)CASEFEEDER CALIBER CONvER-SIONS (Page 17)

$23.95 eachH.

15



16

Dillon’s Reloading Accessory Package Deals include: either Dillon’sD-Terminator Electronic Scale or Eliminator Balance Beam Scale,

a Dial Caliper, a Primer Flip Tray, a Bench Wrench, an 8 oz. bottle ofCase Lube, a pair of clear safety glasses, a machine cover and the latestedition of the Lyman Reloading Handbook.SDB (Balance Beam Scale) K95-14482 $182.95SDB (Electronic Scale) K95-14483 251.95RL 550B (Balance Beam Scale) K95-21143 181.95RL 550B (Electronic Scale) K95-22117 250.95XL 650 (Balance Beam Scale) K95-21430 197.95XL 650 (Electronic Scale) K95-22118 266.95

Dillon’sRoller

Handle givesyour reloaderan entirely new“feel,” reducesoperatorfatigue, andmakes primerseating easier.

Alum. Roller K95-17950 $45.95Plastic Roller K95-22183 40.95

Quick-Change Cover for use withpowder measure. K95-11143 $14.95

With Dillon’s RL 450 Upgradecomponents, you can, either all

at once or one assembly at a time,upgrade your RL 450 reloader to anRL 550B!RL 450 Upgrade ComponentsFrame Change K95-20094 $94.95Powder Failsafe K95-20251 87.95Auto Prime K95-20055 85.95Auto Eject K95-20002 59.95Primer Warning K95-20302 25.95

Dillon’s Bullet Tray is a simple,shallow aluminum bullet tray

designed and located for economy ofmotion. Our tray works on the SquareDeal “B”, RL 550B and XL 650 whenequipped with the RL 550/XL 650Strong Mount, and a separate kit isavailable for the RL 1050.Bullet Tray Kit K95-22214 $41.95RL 1050 Tray Kit K95-22215 41.95

Dillon’s LowPowder Sen-

sor provides anaudible and visualreminder when it’stime to refill yourpowder reservoir.When the powderlevel drops toabout 1,000 grainsremaining in thereservoir, a buzzer will sound and abright red LED will light. Designed tofit all Dillon powder measures. Madeof clear polycarbonate, it simplyreplaces the die-cast metal lid sup-plied with the measure, and operateson two AAA batteries (included).

K95-16306 $41.95

Dillon’s “BeltedMagnum” Powder

System features a max-imum-capacity steelpowder bar that candispense more than100 grains of extrudedIMR powder. Magnumrifle cartridges can re-quire from 70 grains towell in excess of 100grains for a singlecharge. We tested thissystem with various extruded riflepowders and found that powdercharge variations stayed within plus-or-minus three-tenths of a grain.

Magnum Powder SystemK95-97126 $142.95

Dillon’sStrong

Mountsincrease yourmachine’s“footprint” toover 10”,spreading the load over the wholebench instead of stressing the leadingedge. For XL 650 owners with limitedoverhead clearance, the XL 650-onlymount raises the machine 6” abovethe bench top. All mounts come withall the fasteners necessary to mountyour machine and are coated with adurable black wrinkle finish.RL550/XL650 K95-22051 $48.95XL650-only K95-22052 45.95Square Deal “B” K95-22223 64.95

Dillon’s Toolholders are available for your RL 550B, XL 650, SL900, and Square Deal B, and ensure that the tools you need

to service your reloader are handy and organized. No more dig-ging around your bench trying to find the right size hex wrench!XL 650/SL 900 with Wrench Set K95-11555 $29.95XL 650/SL 900 w/o Wrench Set K95-11554 18.95RL 550 with Wrench Set K95-11541 28.95RL 550 w/o Wrench Set K95-11543 17.95Casefeed 550, with Wrench Set K95-11540 28.95Casefeed 550, w/o Wrench Set K95-11542 17.95Square Deal B with Wrench Set K95-19441 26.95Dipped Ball-End Hex Wrenches K95-11483 17.95One-Inch Bench Wrench K95-10842 7.95Square-Deal-Only Wrench K95-19970 8.95

Dillon Reloading Accessories

$25495*

110 Volt US ModelLarge Pistol K95-14450Small Pistol K95-14451220 Volt Euro Model, $264.95 Large Pistol K95-14453Small Pistol K95-14454

*Caliber Conversions sold separately.

Caliber Conversions

for the RL 550B Casefeeder

$23.95 Each.25-20/.32-20 Winchester K95-14206.30 Mauser/7.62x25 K95-14204.32 S&W Long K95-14205.32 H&R Magnum K95-142839mm/9x21/.38 Super/.30 Luger K95-1428410mm/9x25 Dillon K95-14285.38 S&W K95-14208.38 Super Comp. K95-14287.38/.357 Magnum K95-14286.357 SIG/.40 S&W K95-14289.38-40/.44-40 Winchester K95-14288.41 Magnum K95-14290.44 Russian K95-14209.44 Special/.44 Magnum/.44 Colt K95-14291.45 GAP K95-11441.45 ACP/.40 Super/.400 Cor-Bon K95-14292.45 Auto Rim K95-19140.45 Colt/.45 S&W/.454 Casull K95-14279.45 Winchester Magnum K95-14210

A CasefeederUPGRADEfor YOURRL 550B

A CasefeederUPGRADEfor YOURRL 550B

17Dillon’sStainless

Steel Case Gages

Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included

L. E. Wilson Case Gages, Deburring Tool.22-250 K95-12718 $36.00.243 K95-12828 36.00.25-06 K95-11760 36.00.270 K95-11828 36.006.8 SPC K95-19522 36.00.30 Carbine (Case Length Only) K95-18784 36.00.30-30 K95-12924 36.007.62 x 39 K95-14901 36.007mm Mag. K95-12336 46.00.300 AAC Blackout K95-19515 36.00.300 Win. Mag. K95-11752 46.00.300 WSM K95-18709 36.00.357 SIG K95-18708 36.00.38-40 Winchester K95-10682 36.00.44-40 Winchester K95-10697 36.00.50 Browning MG K95-14447 60.00Deburring Tool K95-16038 $20.00

Overall Length gauge The initial distance a bulletmust travel when fired (fromthe cartridge case mouth until itengages the rifling) is absolutelycritical to achieving peak accu-racy.Straight K95-14622 $38.95Curved (use for auto, lever andpump rifles)K95-14862 $39.95Modified Case (required) $6.99 each.223 Rem. K95-14627.22-250 K95-14628.243 Win. K95-14631.270 Win. K95-146417mm Rem. Mag. K95-14648.308 Win. K95-14652.30-06 K95-14653.300 Win. Mag. K95-14655

Bullet ComparatorCorrect bullet seating depth iscritical to accuracy. In addition,minor variations in bullet seat-ing depth will have an effect onboth pressure and velocity.Bullet Comparator K95-14670 $16.95Comparator Insert (required) $8.95 each.22 caliber K95-14672.24 caliber K95-14673.25 caliber K95-14674.26 caliber K95-14675.27 caliber K95-14676.28 caliber K95-14677.30 caliber K95-14678.33 caliber K95-14679.35 caliber K95-14680.37 caliber K95-14681.45 caliber K95-14682

Attain Peak Accuracy With Hornady’s L-N-L O.A.L. Gauge and Bullet Comparator

(Caliper not included)

.223 Remington K95-13254 $26.95

.308 Winchester K95-12867 27.95

.30-06 Springfield K95-12679 28.95

.380 ACP K95-15160 15.459mm Parabellum K95-15161 15.45.38 Super K95-15158 15.45.38 Special K95-15159 15.45.357 Magnum K95-15163 15.45.40 S&W K95-15164 15.4510mm K95-15162 15.45.44 Magnum K95-15165 15.45.45 ACP K95-15166 15.45.45 Colt K95-15167 15.45.45 GAP K95-12672 15.45

CV-2001 – The Industry Standard Dillon’s CV-2001 Vibratory Case Cleaner is the

largest in the industry. Its 12-1/2 quart bowl capacitywill allow you to polish up to 1,300 .38/.357 or 550.30-06 cases per hour.

Not only is our capacity greater, but our motor islarger in horsepower, internally cooled, thermallyprotected, and turns on precision ball bearings. Thisis no “hobby” machine!

The bowl and base are constructed of7/32” thick injection molded high-strengthpolypropylene which is impact and abra-sion resistant.

Case/Media SeparatorsAfter we sold thousands of our famous

first generation FL-2000 case cleaners, cus-tomers who had purchased them beganasking us to address the problem of sepa-rating the cleaned and polished brass fromthe cleaning media.

We knew from the beginning that thesimplest method of separating would be arotating squirrel cage, but we had to find adesign we could manufacture economical-ly. Our problem was that it had to be BIG –big enough to handle the entire load of theFL-2000 series case cleaners.

The solution was an injection moldedreversible part. Simple, and it works great.

Our device is large,10” x 14”, and will hold morethan 1,600 .38 Special cases. Itsits on a large media collectiontub that measures 18” x 22”.The tub keeps the mess off thefloor and bench.

It’s fast – so fast it willremove media from 1500rounds of .223 brass in a matterof seconds.

Limited Work Space?Dillon’s introducing the new CV-750 heavy duty

Vibratory Case Cleaner for those with limited space.This new case cleaner uses the same motor as theCV-2001 and is every bit as tough – just more com-pact. To accompany the CV-750, the CM-500 doesthe same job as the larger CM-2000 Case/Media Sep-arator; and, like the CV-750, handles just about halfthe capacity of the larger unit.

Although scaled down in size, these two pieces ofequipment are every bit as tough as their full-sizedcounterparts. We used the same materials in theirconstruction and designed them to work just as hard– and do it in a more compact area!

Attention European Customers:Case Cleaners are available in 220 volt!

Euro Cv-2001 K95-22047 $213.95Euro Cv-750 K95-19473 $169.95

CM-2000 Case/Media Separator K95-20675 $73.95CM-500 Case/Media Separator K95-21045 $46.95

Dillon’s Case Preparation EquipmentDillon’s Case Preparation Equipment

CV-2001K95-20493

$188.95

All Dillon CV-2001 and CV-750 Vibratory Case Cleaners have a One-Year Warranty on the electric motor.

CV-750 K95-19455 $144.95

18

19Rapid Polish 290

SHINE? You bet your brass!Dillon Precision has devel-oped another exciting newproduct to make your reload-ing faster and easier. RapidPolish 290 is the first cartridgecase finish designed specifi-cally to bring a brilliant shine(20 percent brighter than tum-bling media alone) and a pro-tective coating to reloaded

ammunition. Simply add several capfuls to themedia in your tumbler and run. Rapid Polish 290has a great residual value and stays in your tum-bling media. You’ll use less each time you cleanyour cases.Rapid Polish 290 contains no ammonia, so it

won’t weaken brass cases!Rapid Polish 290

8 oz. bottle. K95-13804 $8.95Case (20 pc.) K95-20255 135.95

DillonCaseLube

Rapid Lube 5000, Dillon’saerosol cartridge case lubri-cant, has been replaced byan “environmentally cor-rect,” non-aerosol case lube.It works the same: Simply layyour cases out, spray lightlywith one or two passes andyou’ve done it. No mess, noguesswork. Within minutesthe lubricant distributesitself around the cartridge

cases and you’re ready to load. Try a bottle.You’ll never use a grease pad again.

D.C.L. Dillon Case Lubricant8 oz. bottle K95-13733 $8.95Case (20 pc.) K95-20256 135.95

Half and Half 10 bottles of polish /10 of lubeCase (20 pc.) K95-21375 $135.95

Crushed walnut hull polishing media –quickly cleans even the dirtiest of cases. 15-pound bag K95-13287 $23.95

Ground corn cob polishing media – the best there is for that final polish.

10-pound bag K95-13496 $15.95

Don’t Forget Polishing Media!

DP

This month’s cover model isStephanie with a Benelli M4 Tac-tical Shotgun in the lounge at C2

Tactical Gun Range in Tempe,Arizona. (www.c2tactical.com).To see more photos of Stephanie

and other Blue Press cover models, you can “follow” us on Instagram@bluepress on your

smart phone, or go towww.instagram.com/bluepress

and click “follow.”

20

STANDARD FEATURES:• Automatic Indexing• Uses Standard 7/8” x 14 Dies• Loading Rate: 800-1000 Rds./Hr.• Comes With One Caliber Conversion• 5-Station Interchangeable Toolhead• Automatic Powder Measure• Automatic Primer System• Lifetime “No-B.S.” Warranty


K95-650Reloading dies sold separately.

*Prices vary on exotic-caliber machines.

XL650XL650

Total price as pictured here with optional accessories: $1127.55

Electric Casefeeder K95-210** $218.95Powdercheck System K95-21044 $68.95.45 ACP Die Set K95-14404 $63.95Strong Mount (550/650) K95-22051 $48.95Aluminum Roller Handle K95-17950 $45.95Low Powder Sensor K95-16306 $41.95Aluminum Bullet Tray K95-22214 $41.95xL 650 Toolholder with Wrench Set K95-11555 $29.95

XL 650 DVD Instruction ManualK95-19484 $19.95

21

B. POWDER MEASUREK95-20782, $76.95 eachMagnum Rifle Powder BarK95-21353, $29.95 each

X-Small Powder Bar K95-20780, $29.95 each

C. POWDER CHECK K95-21044, $68.95 each Three or more, $61.95 ea.D. qUICK CHANgEToolhead, TH Stand and Pow-der Measure

K95-22059, $107.95

H. TOOLHEADSK95-13863, $27.95 eachThree or more, $25.95 ea.I. POWDER DIESExtra powder dies allow you tomove your powder measure fromtoolhead to toolhead withoutchanging the “belling” adjustment.

K95-20064, $11.35 each, three or more, $10.25 ea.X-Large Powder Dies, K95-21253, $19.95 each

K. CASEFEED ASSEMBLySpecify large pistol, small pis-tol, large rifle or small rifle.

$218.95 (110v), $228.95 (Euro. 220v)

L. ExTRACASEFEED PLATES$38.95/49.95

g. TOOLHEAD STANDSThe ultimate in conveniencefor keeping your reloadingbench clean and uncluttered.

K95-22055, $20.95 eachThree or more, $18.95 ea.

DON’T FORgET ONE OF THESE!Universal Mounting Hardware Kit K95-14355 $5.491” Bench Wrench K95-10842 7.95

Buy two or more Bench Wrenches for $7.10 each

J. xL 650 PRIMINg SySTEM (Not Pictured)Small Priming System K95-21065 $80.95Large Priming System K95-20982 80.95

E. PRIMER PICKUP TUBESUsed to transfer primersfrom flip tray to primingsystem.1 Lg. tube K95-22029 $7.991 Sm. tube K95-22028 7.992 Sm., 2 Lg. K95-20056 23.954 Lg. tubes K95-20050 23.954 Sm. tubes K95-20049 23.95

F. PRIMER FLIP TRAyA heavy, high-quality tray large enough for theFederal primer package.

K95-13606, $20.95 each

G.

O.

xL 650 Casefeed Assembly Large pistol (110v) K95-21080 (Euro. 220v) K95-97025Large rifle (110v) K95-21081 (Euro. 220v) K95-97022Small pistol (110v) K95-21079 (Euro. 220v) K95-97021Small rifle (110v) K95-21082 (Euro. 220v) K95-97023xL 650 Casefeed Plate Large pistol K95-21072 $38.95Large rifle K95-21075 38.95Magnum rifle K95-18492 49.95Small rifle K95-21074 38.95Small pistol K95-21073 38.95

I.

H.

L.

E.

F.

B.

D.

C.

A. xL 650 CALIBERCONvERSION KITSInclude shellplate,locator buttons, pow-der funnel and case-feed adapter parts.Available in most cal-ibers; please specifycaliber desired.

(You MAY need a different casefeed plate, see item L.)K95-XL650 CONVERSION (Specify Caliber) $77.95*

*(All belted magnums and exotic calibers, $87.95 ea.)

A.

XL 650 Accessories

N. SPARE PARTS KITDon’t risk downtimewaiting for a replace-ment part!1 Priming Station Locator Tab1 650 Ejector Wire1 Slide Spring Pin1 Indexer Spring1 650 Primer Indexing Arm1 650 Index Pawl1 650 Primer Cam1 650 Ring Indexer2 Pistol Decapping Pins1 650 Index Spring Revision A1 #10 Tinnerman Insert1 Index Arm Bowed Washer1 Short Lever Spring1 Bellcrank Cube1 3/8” Index Ball1 Powder Bar Spacer Plug1 650 Brass Tip Set Screw4 Locator Pins (#1, #2, #3, #4)1 5/16” Index Ball1 Tab/Spring Arm Spring1 Case Insert Slide Spring1 650 Pawl Spring

1 Indexing Arm Spring1 Index Ball Spring2 Pickup Tube, Small, Yellow Tips1 650 Tool Head Pin2 Pickup Tube, Large, Green Tips1 Primer Cup Spring2 Retaining Clips2 650 Shellplate Cap1 650 Primer Support Shim1 Case Insert Slide Spring Cap1 Priming Station Locator TabBushing2 Dispensing Tips, Large2 Dispensing Tips, Small1 Failsafe Bushing Revision B

K95-21146, $25.95

q. LOW POWDER SENSORProvides an audible and visualreminder when it’s time to refill yourpowder reservoir.

K95-16306, $41.95

Q.

M. MACHINE MAINTENANCE KITEverything you need tokeep your Dillon loadercleaned and lubricated upto factory specifications.Available in combinationwith a spare parts kit foryour machine.

Maint. Kit & XL 650 Spare Parts Kit K95-97017, $39.95

O. EqUIPMENT DUST COvERSThis packcloth nylon machine covercomes equipped with a D-ring, allowingthe heavy-duty zipper to be locked.XL 650 Cover, K95-10443, $39.95(P.) Master lock, K95-13083, $3.95Quick-Change Cover (for use withpowder measure) K95-11143, $14.95

P.


$7995

If Cowboy Action Shooting is yourgame, why not CARRY the gun you

shoot the most? These holsters can beworn strong side, appendix carry orcross draw and are fully molded. Nowalso available for J-Frame S&Ws.4-3/4” SA Colts/clones K95-115604-5/8” Ruger Blackhawk K95-15765Ruger LCR K95-290302” J-Frame S&W Rev. K95-15764

Mernickle Holsters’Conceal-Carry

Performance Series

“Wild Bunch” 1911 Holster & Mag PouchThis holster/mag pouch was designed in

a joint effort by World Cowboy ActionShooting Champion Gene “Evil Roy”Pearcey and World Fast Draw ChampionBob Mernickle when SASS introduced the“Wild Bunch” category for CowboyAction Shooting.

When these two champions put theirheads together, they created a holsterand mag pouch that look like they weremade at the turn of the century, yet fea-ture state-of-the-art speed and accuracy.The holster is hard molded so as not tolose its shape even after thousands ofdraws. It spaces the pistol’s grip frame

away from your body so you’ll get a fullcombat grip, and the holster includes theT-nut lock system to ensure that it staysin place during a draw.

The mag pouch spaces the maga-zines so when you grab one mag, thesecond isn’t in your way; above thebelt line so the belt doesn’t interferewith the draw; and at the max depthrequired by the sport – and no more –so you’ll get a full grip and the abilityto index with your forefinger for arapid mag well insert.1911 Holster K95-19947 $139.95Mag Pouch K95-19946 44.95

Color Coded Aluminum Toolheadsfor Your RL 550B & XL 650

Blue Anodized RL 550B Toolhead K95-62132 $29.95Black Anodized RL 550B Toolhead K95-62133 29.95Gold Anodized RL 550B Toolhead K95-62134 29.95Silver RL 550B Toolhead K95-62135 29.95

Blue Anodized XL 650 Toolhead K95-62136 $34.95Black Anodized XL 650 Toolhead K95-62137 34.95Gold Anodized XL 650 Toolhead K95-62138 34.95Silver XL 650 Toolhead K95-62139 34.95

2222


23

Until now, reusing military brass, with its crimpedprimer pockets, has been a tedious task. The Dil-

lon solution is a remarkably simple device that boltsto your bench and allows you to swage the primerpockets with speed and ease. The case is supportedfrom the inside, so you won’t be tearing the rims offthe brass. A tool steel, hardened swage rod (easy tochange from large to small primers) simply rolls thecrimp away. No reaming is necessary. Our uniquecompound cam leverage system assures not onlyease of operation, but perfect alignment with eachand every round. Sound simple? It is and it works.What’s more, it’s inexpensive. The Super Swage 600comes with large and small swage rods. 6.8 SPC Back-Up Rod K95-62124 $20.959mm Adaptor K95-62168 14.95.40 S&W Adaptor K95-62169 14.95

K95-20095$100.95

The RT 1500 is used just likea standard size die. The big

difference is that while you arepushing the case into the die tosize it, an electric motor drivinga carbide cutter at 4500 RPM istrimming the case to length.Chips are drawn off through avacuum manifold that clampsto the outside of the specialsize/trim die. (Vacuum cleanerand hose not included.) The RT1500 is equipped with a quick-

disconnect power cord; and itcan be used on any standardreloader, single stage or pro-gressive.

The RT 1500 Case TrimmerAssembly K95-62164 is$327.95. (Available only in 110volt 60 hz.) Size/trim dies aresold separately (Please see chartbelow). Replacement carbidecutting blades, K95-13141, are$19.95 each. Upper lock rings,K95-13559, are $4.99 each.

.204 Ruger K95-21028 $58.95

.222 Rem. K95-21363 58.95

.223 Rem. K95-20107 50.95

.223 Rem. Carbide K95-19797 175.00

.220 Swift K95-21364 58.95

.22-250 Rem. K95-20110 55.95

.243 Win. K95-20109 55.95

.25-06 Rem. K95-21367 58.956.5 x 55mm K95-21495 58.95.270 Win. K95-20112 55.957mm Rem. Mag. K95-21366 58.95.30-30 Win. K95-20111 55.95.300 WSM K95-21029 58.95.300 Blackout K95-62140 175.00NOTE: The .300 Blackout Carbide TrimDie MUST be used with a Short Trim

Die Toolhead..308 Win. K95-20106 50.95.308 Win. Carbide K95-62126 175.00.30-06 K95-20108 50.95.30-06 Carbide K95-62159 225.00.300 Win. Mag. K95-21370 58.95.300 Wby. Mag. K95-21371 58.95.303 Brit. K95-21765 58.958 x 57 Mauser K95-21502 58.95.338 Win. Mag. K95-21368 58.95

RT 1500 Motor Only K95-61500 $297.95

RT 1200B Case TrimmersRT 1200B Trimmers will continue be soldwhile they last. The RT 1200B Case Trim-mer Assembly K95-22080 is $267.95. NOTE: The RT 1200B trimmer for the7.62 x 39 and 6.8 SPC cartridges is notcompatible with other size/trim dies, and these trim dies are not compatible

with the RT 1500.RT 1200B Motor K95-22024 $272.956.8 SPC (trim die) K95-16391 58.957.62 x 39 (die) K95-16390 58.95

Dillon’s New Rapid Trim 1500 Case TrimmerDillon’s RT 1500showninstalledon an XL 650.

RT 1500 & 1200B Size/Trim Die Calibers


XL 650 Short Trim Die ToolheadK95-62112 $33.95

MILITARY BRASS?Eliminate the “Grunt Work” with Dillon’s Super Swage 600Eliminate the “Grunt Work” with Dillon’s Super Swage 600

5JR-DL $75Afull-length belt slide that offers all-day comfort

and superior concealment for an outside-the-pants belt holster.Beretta 92 K95-18817 Colt Government Model K95-18810Colt Commander K95-18811Colt Officers K95-18812 GLOCK 17, 22, 31 K95-18813

GLOCK 19, 23, 32 K95-18814 GLOCK 26, 27, 33 K95-18815GLOCK 20, 21 K95-18816Makarov K95-18819 SIG P220, P226 K95-18818 SIG P228, P229 K95-18827S&W Military & Police 9mm/.40 Auto K95-19011S&W Military & Police .45 Auto K95-19012S&W Military & Police SHIELD™ K95-12241S&W 2” J-Frame Revolver K95-18820Springfield Armory XD 4” K95-18825Springfield Armory XD 5” K95-18874Springfield Armory XD-S K95-12236Ruger 2.25” SP-101 Revolver K95-18828


24Dillon Leather by Mitch Rosen!Dillon Leather by Mitch Rosen!

MBS-DL $50Single mag pouch with snap-

on/snap-off belt loop.1911 K95-18847Beretta K95-18848 GLOCK 17, 22, etc. K95-18849 GLOCK 20, 21, etc. K95-18850

5DM-DL $50Double mag pouch with two

belt loops.1911 K95-18851Beretta K95-18852GLOCK 17, 22, etc. K95-18853 GLOCK 20, 21, etc. K95-18854

SOS-DL $55One magazine, one tactical

light (fits 6P-size lights).1911 K95-18855Beretta K95-18856GLOCK 17, 22, etc. K95-18857 GLOCK 20, 21, etc. K95-18858

When we lost our supplier for Dillon Leather, we considered

abandoning the gunleather business. Fortunately, we were

able to team up with Mitch RosenExtraordinary Gunleather to

continue to offer a best-quality,made-in-the-USA line of belts and

holsters. We know you’ll like theseproducts – we’re happy to have

our name on them.

Clipper-DL $65Our clip-on, inside-the-waistband holster features

a steel reinforced mouth and a high-qualityspring-steel clip.Colt Commander K95-18833Colt Officers K95-18834 GLOCK 17, 22, 31 K95-18829 GLOCK 19, 23, 32 K95-18830 GLOCK 26, 27, 33 K95-18831S&W Military & Police 9mm/.40 Compact K95-19013

El Raton-DL $50This pocket holster secures and properly positions

a J-Frame revolver in your pocket. Will not comeout when you draw.2” J-Frame S&W Revolver K95-18843

25


1.5” Gun Belt32” Waist K95-1885934” Waist K95-1886036” Waist K95-1886138” Waist K95-1886240” Waist K95-1886342” Waist K95-1886444” Waist K95-18865

1.25” Gun Belt32” Waist K95-1887334” Waist K95-1886736” Waist K95-1886838” Waist K95-1886940” Waist K95-1887042” Waist K95-1887144” Waist K95-18872

Dillon Leather by Mitch Rosen!Dillon Leather by Mitch Rosen!

Best-Quality Belt-DL $70Simply the best GUN BELT you have ever owned. Full, dou-

ble-thickness leather with solid brass buckle and hardware.

Sport EXP-DL $98The Sport™ holster is a straight-drop design featur-

ing a tunnel loop and rear stabilizing slot. This isan all-around holster suited to field use, "practical"competition, and some prefer it for daily carry. Slimprofile, straight drop, close to the body.S&W 4” K-Frame Revolver K95-19372S&W 4” Lugged Barrel L-Frame Revolver K95-19373 S&W 4” Light Barrel N-Frame Revolver K95-19374 S&W 4” Lugged Barrel N-Frame Revolver K95-19375 S&W 5” Lugged Barrel N-Frame Revolver K95-19376

THE WILDERNESS’ SAFEPACKER™ HOLSTER is the ONLY mode ofconcealed carry that I have personally witnessed save a man’s life.

It’s a long story, but suffice it to say that the element of surprise afford-ed by the Safepacker did the trick. The folks at The Wilderness con-tend that the Safepacker™ is the best, most versatile and utilitarianholster in the world. I tend to agree, because the one you see picturedat left…is mine. Mark Pixler, editor

The Safepacker can be hand carried like a day planner, equippedwith a shoulder strap (not included), slipped into an attaché case,opened with the top flap stuffed between the mattress and box springson your bed, strapped to a seatbelt, attached to a sun visor, clipped to abackpack, or worn on your hip as a very low-profile “un-holster.” “Government Model” Safepacker, RH K95-11703 $89.95“government Model” Fits: Colt government Model, gLOCK 17/18/20/21/22, SIg

P-220/226, Beretta 92/96, HK USP-45, 4” K-Frame, 3” N-Frame, etc.“Commander” Safepacker, RH K95-11702 89.95“Commander” Fits: Colt Commander, SIg P-245/229, HK USP-45 Compact, Tokarev, etc. “Officers’ Model” Safepacker, RH K95-11701 89.95“Officers Model” Fits: Colt Officers’ Model, gLOCK 19/23/30/32/36, Para P-12, etc.

“GLOCK 26/27” Safepacker, RH K95-11700 89.95“gLOCK 26/27” Fits: g 26/27, Springfield xD Subcompact, Makarov, etc.

“J-Frame” Safepacker, RH K95-11699 89.95“J-Frame” Fits: S&W Centennial, Taurus M85, Walther PPK, KelTec P-11, etc.

“Mustang” Safepacker, RH K95-11698 89.95“Mustang” Fits: Colt Mustang, Pony, KelTec P-32, Beretta Tomcat, etc.

The Safepacker

Small Pistol Sheath K95-13351 $28.50 Small Revolver K95-13375 $28.50 Large Pistol Sheath K95-13358 $28.50

Center of Mass LLC’s Pistol Sheath is anadjustable, ambidextrous, multi-fit

KYDEX® holster that is durable, affordableand Made in Idaho!

The Small Pistol Sheath will hold all1911s; Browning Hi Power; Buckmark 22.;all Kahrs; Walther P-22, PP, PPK; Kel-Tec P-

11, PF9; Ruger LC9; Taurus Slim 9,.40;CZ75s and Witness.

The Small Revolver Pistol Sheath fits allJ-Frame-Size revolvers, including the newS&W Bodyguard, Ruger SP101 and LCR.

The Large Pistol Sheath will hold allSpringfield XDs; GLOCKs (excluding the

G21 w/Picatinny rail); S&W M&Ps, SDs, Sig-mas, P99s; FNs; Walther PPS, P99; HiPoints; Taurus Millenium, Pro, 24/7, 809,840, 845; HK USP Compacts, P30, P30Long, 45 Long, P2000/2000SK; SIG Polymerframe pistols; Ruger SR9, SR40, SR9C,SR40C, P345, P95; and many others.


26

The Pistol Sheath by Center of Mass LLC

Close & Ready Bedside Holster CaddyThe key to the successful gunfight-

ers of the Old West was not somuch the weapon of choice, butrather the holster. How quickly theweapon could be retrieved, aimedand fired was the difference betweensurvival and becoming a statistic. TheClose & Ready Holster Caddy pro-vides a faster and safer way to protectyour family. It works with most exist-ing holsters and slides easily betweenthe mattress and box springs oneither side of your bed.

K95-18046 $29.95Holster NOT

Included

TheWilderness’ OriginalInstructor Belt is an incredibly strong belt with a speciallydesigned “V” ring buckle. Imitation is the sincerest formof flattery, and the marketplace is full of copies of thisbelt, but none can compare to the original.

We’re selling the five-stitch version, which has extrastitch lines to make the belt more rigid vertically in

order to better support holsters, magazine pouches andother gear. This belt is a favorite with law enforcement,military personnel, firefighters, paramedics, etc. Note:The 1.75” belt works best with BDUs or jeans. The 1.5“belt features a scaled-down buckle.Measured Waist 1.5” Belt 1.75” Belt 32” Waist K95-10965 K95-10253 $39.9534” Waist K95-10966 K95-10128 39.9536” Waist K95-10967 K95-10129 39.9538” Waist K95-10968 K95-10130 39.9540” Waist K95-10969 K95-10131 39.9542” Waist K95-10970 K95-10132 39.9544” Waist K95-10971 K95-10133 44.9546” Waist K95-10972 K95-10889 44.95

IHL Ltd. Class Holster $92.95Colt Gov’t, Black K95-16456Colt Gov’t, Brown K95-14348Colt Com, Black K95-16886Colt Ofcr’s, Black K95-16887GLOCK 17, Black K95-16891GLOCK 19, Black K95-16890

IHL Prosecutor Holster $87.95Ruger Alaskan (Pictured) K95-15038S&W Governor .410/.45, 2.75” bbl. K95-15041S&W .500 Mag., 4” bbl. K95-15039Taurus Judge 2.5”.410, 2” bbl. K95-15040

IHL Solo Mag Pouch $38.95Single Stack, Black K95-16446Single Stack, Brown K95-13145Double Stack, Blk. K95-16447

IHL Belt Slide $49.95Colt Gov’t, Black K95-16468Sm. GLOCK, Black K95-16469

IHL Speed Strip Wallet.38/.357 6-rd. K95-18308 $26.50.38/.357 8-rd. K95-18987 $26.50.44/.45 6-rd. K95-18988 $26.50.410 Ga. 6-rd. K95-18990 $29.95.500 S&W 6-rd. K95-18989 $26.50

IHLINTERNATIONAL HANDGUN LEATHERby Ian Martin

IHL Hammerhead Shark 1911Slide K95-19230 $114.951911Pouch K95-19231 72.95

THE WILDERNESS TACTICAL PRODUCTSTHE WILDERNESS TACTICAL PRODUCTS

27

A.

C.

D.

A./B. Rollypoly Folding Dump Pouch K95-19999 $25.99(A.)Open: 6” Diameter 8” Tall (B.)Folded: 3”x 3”x 1.75”

C. Spartan Wallet, Foliage Green (folded) K95-19993 19.99D. Spartan Wallet, Black (open) K95-19992 19.99

MAXPEDITION HARD-USE GEAR

B.


“Revolution” Holster SeriesBlade-Tech used its extensive knowledge of Kydex© holstermaking to bring youthe Revolution line of holsters. Using a proprietary blend of polymers, Blade-Tech has engineered these holsters to offer lifetime performance in a widerange of conditions. The holsters won’t become soft in extreme temperatures(over 300º F) and won’t become fragile in low temperatures. Colt 1911 K95-40011 $29.99GLOCK 17/22 K95-40012 29.99GLOCK 19/23 K95-40013 29.99GLOCK 20/21 K95-40069 29.99GLOCK 34/35 K95-40068 29.99Smith & Wesson 4” M&P K95-40067 29.99Springfield 4” XD 9/40 K95-40071 29.99Springfield 5” XD 9/40 K95-40070 29.99

Single Mag $19.99 ea. 1911 K95-40018 Sm. GLOCK K95-40019Lg. GLOCK K95-40020B92/XD/CZ etc. K95-40021

Double Mag $26.99 ea. 1911 K95-40022 Sm. GLOCK K95-40023Lg. GLOCK K95-40024B92/XD/CZ etc.K95-40025

Quad Mag $39.99 ea. 1911 K95-40026 Sm. GLOCK K95-40027B92/XD/CZ etc.K95-40028

AR-15 Single Tek-Loc™Mag Pouch

K95-40034 $29.99

AR-15 Double Tek-Loc™Mag Pouch

K95-40033 $39.99

28

Blade-Tech Holster/Mag Pouch Hardware (left to right)Large Tek-Loc™ Universal Belt Clip with Hardware K95-40029 $8.95Tek-Loc™ Dropped Offset Holster Attachment K95-40016 19.99Dropped Offset Holster Belt Loop Attachment K95-40017 19.99 Mini Tactical Modular Mount System with Hardware K95-39920 24.99

BLADETECH Ambi Eclipse™ Straight-Drop Holster1911 K95-40117 $79.99GLOCK 17 K95-40118 79.99GLOCK 19 K95-40119 79.99GLOCK 26 K95-40120 79.99GLOCK 34 K95-40121 79.99GLOCK 42 K95-40126 79.99S&W M&P 4.5” 9/40 K95-40123 79.99Springfield XD 4” 9/40 K95-40122 79.99Springfield XDM 4.5” 9/40 K95-40124 79.99Springfield XDM 5.25” 9/40 K95-40125 79.99

BLADETECH 1.5” Inner/Outer Hook & Loop Belt32” K95-12242 $59.9934” K95-12243 59.9936” K95-12245 59.9938” K95-12246 59.9940” K95-12247 59.9942” K95-12249 59.9944” K95-12251 59.9946” K95-12253 59.9948” K95-12255 59.99


Safariland Custom Fit 567 Holsters The Model 567 Custom Fit holster is one of the lightest, thinnest, best fitting

concealment holsters available. True to its name, it adjusts to a wide variety ofpopular handguns, giving each a “custom fit” in this holster.4” K & L-Frame S&W, Ruger, and Colt Rev. K95-19262 $43.954” N-Frame S&W Revolvers K95-19263 43.95

5” N-Frame S&W Revolvers K95-19264 43.95Beretta Compact, Taurus Compact, CZ-75, Colt Commander Model K95-19265 43.95Beretta, Taurus, Browning HP, Colt 1911 K95-19266 43.95Colt Officers’ Model, GLOCK 19/23, SIG P228, HK USP Compact 9/40 K95-19267 43.95GLOCK 17, 20, 21, 22, HK USP 9/40, Ruger P Series, SIG P220 K95-19268 43.95Safariland Model 6377 ALS™ Holsters

The Model 6377 is a concealment version of the all new Automatic LockingSystem series holster. Once the weapon is holstered, it locks into place, provid-ing an extra measure of security from the standard open-top holster.Colt 1911 K95-40072 $39.95GLOCK 17/22 K95-19444 39.95GLOCK 20/21 K95-19443 39.95GLOCK 34/35 K95-40073 39.95SIG 220/226 K95-19446 39.95SIG 220/226 with Accessory Rail (no light) K95-19447 39.95SIG 228 K95-19445 39.95S&W M&P 9/40 K95-19448 39.95Springfield 4” XD 9/40 K95-40074 39.95Springfield 5” XD 9/40 K95-40075 39.95Springfield XDM 9mm K95-40076 39.95Springfield XDM .40 K95-40077 39.95

29


SafarilandCustom Fit

567

SafarilandModel6377 ALS™

Comp-Tac: Holsters Dedicated to Your VictoryComp-Tac: Holsters Dedicated to Your Victory

Comp-Tac International The International features a modular mounting system that offers the versa-

tility of different mounting options, combining a belt holster, belt drop offsetholster, paddle holster and paddle drop offset holster into one. GLOCK 17/22 K95-40110 $69.00GLOCK 34/35 K95-40109 69.00S&W M&P 9/40 K95-40111 69.00S&W M&P Pro K95-40112 69.00Springfield XD Tactical 9mm K95-40116 69.00Springfield XDM 4.5 9/40 K95-40115 69.00Springfield XDM 5.25 9mm K95-40113 69.00Springfield XDM 5.25 .40 K95-40114 69.00

Comp-Tac Infidel Ultra An inside-the-waistband holster combining the wearability of the Comp-Tac

Minotaur MTAC with the simplicity and convenience of The Infidel. Ideal forthe individual who needs to safely take his or her weapon off and on through-out the course of the day.Colt 5” 1911 K95-40102 $90.00GLOCK 17/22 K95-40103 90.00GLOCK 19/23 K95-40104 90.00S&W Shield K95-40105 90.00S&W M&P 9/40 K95-40106 90.00Springfield XD-S K95-40107 90.00Springfield XDM 4.5 9/40 K95-40108 90.00

SAFARILANDHolsters

TUFF PRODUCTS THAT PROTECT

TUFF InLine MOLLE Mag Bag™ is apadded case made of 1000 Denier Cor-

dura® with a polymer-reinforced rear panelthat holds both rifle and pistol magazines. Coyote Brown K95-15772 $79.95Black K95-15771 79.95

TUFF i Tuck ConcealCarry Phone/Firearm

Holster. Holds iPhone 4/5,Samsung™ Galaxy™ orsimilar (up to 5.5” tall x 3.5” wide x 1”deep) and hidden holster pocket fits RugerLCP/Kel-Tec P3AT or similar.Coyote Brown K95-15775 $39.95Black K95-15777 39.95

TUFF 3 Gun Ammo Bags (Set of 3) aremade of 1000 Denier Cordura® and

equipped with dual 550 cord cinch stringsfor secure closure. The Red/Blue bags holdup to 200 loose pistol/rifle rounds and Blackbag holds up to 200 loose shotgun rounds. 3 Gun Ammo Bags K95-15773 $19.95

SUPER 1050SUPER 1050

SUPER 1050 Stock Numbers.223 Remington K95-21130.223 Rem./Carbide (*$1793.95) K95-21131.22-250 Remington K95-21129.243 Winchester K95-21126.270 Winchester K95-184916.8 SPC (*$1769.95) K95-21150

(6.8 SPC comes with lg. and sm. primer systems)

.30 M1 Carbine (*$1734.95) K95-21142

.300 WSM (*$1784.95) K95-21110

.30-30 Winchester K95-210037.62x39 (*$1769.95) K95-21144

(7.62x39 comes with lg. and sm. primer systems).303 British K95-21060.308 Winchester K95-21058.308 Win./Carbide (*$1801.95) K95-21068.30-06 Springfield (*$1784.95) K95-21059.30-06 Sp./Carbide (*$1934.95) K95-62178.45-70 Gov’t (*$1829.95) K95-21064.32 S&W K95-21134.380 ACP K95-211359mm Parabellum K95-21067.38 Special K95-21136.357 Magnum K95-21137.357 SIG (*$1749.95) K95-21127.38 Super K95-21132.38 Super Comp K95-21069.38-40 Winchester K95-21158.40 S&W K95-2107010mm K95-21138.41 Magnum K95-21139.44 Special K95-21140.44 Magnum K95-21141.44-40 Winchester K95-21159.45 ACP K95-21061.45 Colt K95-21133.45 GAP K95-21002.500 S&W (*$1784.95) K95-20428

STANDARD FEATURES:• Automatic Indexing• Commercial Grade Machine• Swages Military Primer Pockets• Loading Rate: 1000-1200 Rds/Hr• Includes One Caliber Conversion• Factory Adjusted Reloading Dies• Automatic Powder Measure• Automatic Primer System• Automatic Casefeeder

$171995**Prices vary on exotic-caliber machines.


Powdercheck System K95-21044 $68.95Low Powder Sensor K95-16306 $41.95Aluminum Bullet Tray K95-22215 $41.95

Super 1050 DVD Instruction ManualK95-19485 $19.95

30

D. PRIMER PICKUP TUBESUsed to transfer primersfrom flip tray to primingsystem.1 Lg. tube K95-22029 $7.991 Sm. tube K95-22028 7.992 Sm., 2 Lg. K95-20056 23.954 Lg. tubes K95-20050 23.954 Sm. tubes K95-20049 23.95

E. PRIMER FLIP TRAyA heavy, high-quality tray large enough for theFederal primer package. K95-13606, $20.95

E.

D.

A(1).

A(2). F. 1050 MACHINE COvERThis great looking nylon coveradds security to your loadingbench. Comes equipped with aD-ring, allowing the heavy-dutyzipper to be locked.Cover,K95-13239, $39.95

(G.)Master lock,K95-13083, $3.95

G.

C. 1050 TOOLHOLDER Ensures that the tools youneed are handy and organ-ized! Wrenches included.

With bracket K95-62202, $33.95W/O bracket K95-62203, $29.951050 Ball End Dipped Wrench Set

K95-62161, $17.95

F.

A(3). 1050 PRIMER SySTEMLarge primer system conversion K95-20476 $106.95Small primer system conversion K95-20419 106.95A(4). ExTRA CASEFEED PLATELarge pistol K95-21072 $38.95Large rifle K95-21075 38.95Small rifle K95-21074 38.95Small pistol K95-21073 38.951050 POWDER MEASURE K95-20421 $81.951050 TOOLHEAD K95-20420 $198.95

A(1). qUICK-CHANgE TOOLHEAD CONvER-SIONIncludes:•Toolhead •Powder Measure

K95-21393, $270.95

A(2). CALIBER CONvER-SIONIncludes:•Shellplate•Locator Buttons•Swage Backup Rod/ Ex-pander•Casefeed Adapter•Casefeed Plunger•Powder Funnel

1050 Accessories

H. RL 1050 BULLET TRAyDesigned for “economyof motion” when load-ing. Our new bullet trayis made of durable castaluminum and is DillonBlue powder coated.

K95-22215, $41.95

H.

K. 1” BENCH WRENCHK95-10842, $7.95 each.Two or more, $7.10 each.

K.

I. SPARE PARTS KIT1 Super 1050 Spring Bushing1 Cam Guide Bolt 1/4-201 Super 1050 Toolhead Spring1 Priming Station Retaining Tab1 Ratchet Restriction Tab4 Lock Ring Inserts3 Pistol Decapping Pins2 #10 Tinnerman Inserts1 1/4” E-Clip3 Bellcrank Cubes2 Primer Punch Springs2 1/4-20 3/8 BH Screws4 Locator Pins (#1, #2, #3, #4)1 Tab/Spring Arm Spring2 Pickup Tube Tips, Small (Yellow)2 Magazine Orifices, Large (Red)

2 Pickup Tube Tips, Large (Green)2 Magazine Orifices, Small (Blue)2 Retaining Clips1 Slide Roll Pin Sleeve2 Dispensing Tips, Small2 Dispensing Tips, Large

K95-20779, $32.95

B. 1050 TOOLHEADSTANDBlack K95-62201, $49.95 Blue K95-62200, $49.95

J. MACHINE MAINTENANCE KITEverything you need tokeep your Dillon loadercleaned and lubricated upto factory specifications.Available in combinationwith a spare parts kit foryour machine. Maint. Kit & 1050 Spare Parts Kit K95-97018, $46.95

L. BUSHINg DRIvERK95-20341, $12.95 ea.

L.

M. MOUNTINg HARDWARE KITIncludes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4Flat Washers, 4-Fender Washers, 2-Wood Screws.

K95-14355, $5.49

.32 S&W K95-20634 $121.95

.32 ACP K95-20633 121.95

.380 Auto K95-20483 121.959mm K95-20482 121.95.38 Super K95-20484 121.95.38 Super Comp K95-21057 121.95.38/.357 Magnum K95-20477 121.95.357 SIG K95-20068 121.95.40 S&W K95-20545 121.9510mm K95-20788 121.95.41 Magnum K95-20478 121.95.44 Magnum K95-20479 121.95.44-40 Winchester K95-21161 121.95.45 ACP K95-20480 121.95.45 Colt K95-20481 121.95.45 GAP K95-21010 121.95.475 Linebaugh/.480 Ruger K95-20833 158.95.500 S&W Magnum K95-20834 158.95.223 Remington K95-20485 121.95.22-250 K95-21055 139.95.243 Winchester K95-21054 139.95.270 Winchester K95-21053 139.95.30 Carbine K95-20626 139.957.62x39 K95-20631 158.95.300 WSM K95-20466 158.95.303 British K95-21051 121.95.308 Winchester K95-21049 139.95.30-06 Springfield K95-21050 201.95.30-30 Winchester K95-21052 139.95.45-70 Government K95-21056 172.95

31


C.

B.

32

Protect your handguns withDillon’s rugged, padded pis-

tol cases. These cases feature apouch on one side for cleaninggear or other accessories and

magazine/ speedloaderpouches on the other.The “Small” DillonPistol Case will

accommodate most “Limited”class autos and the “Large” casewill accept pistols with scopesand extended compensators.

Small – 7.5”x 11.5” K95-10161 $18.95Large – 9.5”x12.5” K95-10162 21.95

Dillon Pistol CasesDillon Pistol Cases

I.D. Card Holder K95-14575 $2.95

Black Ammo Bag K95-13755 $25.95

Dillon’s two-compartment ammo bag is constructedwith a flexible inner liner that will allow the entire

volume to be accessible from either zippered opening.You’ll never again mix fired brass with loaded rounds!

Dillon Range Bag Dillon Range Bag

‘Border Shift’ Ammo Bag‘Border Shift’ Ammo Bag

Dillon’s NewRange Bag is de-

signed to hold theStage Bag (inset, topleft) or a BorderShift Ammo Bag(sold separatelybelow), as well as a DillonLarge Utility Box (see Page 36).The Main Compartment is 12.5”long x 7” wide x 10” high, the EndPockets are 8.5” tall x 6.5” wide x2” deep and the Front Pocket is 9” tall x 6” wide x 2” deep. Range Bag, Black K95-19366 $89.95Stage Bag K95-19259 29.95Pistol Pouch, Black K95-17027 10.95

Magazine Base Pad Tool/Scope Battery Cap Remover

Scope WindageAdjustment Tool

This is a MUST-HAVE range-bag accesso-ry. It’s a squib rod (for removing stuck

bullets), magazine base removal tool, andscope windage adjustment and battery capremoval tool.

K95-15250 $12.95

Arredondo Multi-Function Squib Rod

Secure Firearm Products Secure-Mat

The Secure-Mat features a magnetic cor-ner that keeps small parts in place when

you field strip your firearm for cleaning. Itssoft, non-slip neoprene construction pro-tects both your firearm and the work sur-face. It’s ideal for when you’re shooting anout-of-town match and have to clean yourpistol in a motel room!

K95-19398 $27.50

The Otis Technology, Inc. Breech-to-Muzzle Cleaning System cleans rifles

.22 to .50 cal., shotguns .410 bore to 10gauge and pistols .22 to .45 cal. The systemincludes three memory-flex rods, threeforged brass tips, two obstruction removers,a T-handle, 0.5 ounce solvent, all-caliberpatches, a shotgun brush adapter, twopatch savers, five bore brushes, a borereflector and a cleaning guide. Lifetimewarranty!

K95-18174 $39.95

Arredondo Accessories’ Magazine-CleaningBrush is ideal for that little job we all dread

(avoid?)! No excuse, Sir! K95-19257 $11.95

33



34Dillon’s Pistol Die SetsHex Adjustments

for WrenchQuick-Release

Die Inserts

Large,RadiusedMouths

Heavy,Headed

Decap Pin

Long,TaperedCarbide

Ring

UniqueFloatingDecapAssy.

RadiusedCarbide

TighterACCU-CRIMP

Die

VentedSeating

Stem

Sizing/Depriming DieOur sizing/depriming dies feature a unique “floating

decap assembly” with a snap spring that throws the spentprimer off the pin and eliminates the problem of primer“draw back” that often occurs when decapping militarybrass. The primary feature of Dillon’s size die design – thelong, tapered carbide ring with a radiused opening –remains unchanged.

That radiused opening, and its importance to progressivereloading, is one of the reasons why our seat and crimp diesare better. We found a way of manufacturing these dies thathas enabled us to make the lead-in radius even bigger! Thebigger radius makes progressive loading with our equipmenteven smoother – but that’s still only a part of the story.

Bullet Seating DieOur new quick-disassembly seat die allows the user to

disassemble and clean the seat die without losing adjustment.In this manner, bullet lube and shavings can be quicklyremoved from the die, thereby guaranteeing a constant seat-ing depth. We’ve incorporated a “flip-flop” seating stem and aclip that enables you to remove the die insert and change theseating stem from round nose to semi-wadcutter withoutunscrewing a seating stem out of the die body. We’ve alwaysincluded both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin,reverse the seating stem, make any minor seating depthadjustments that may be necessary and go on loading in afraction of the time it used to take.

Crimp DieWe’ve made it easy for you to remove the die insert for

cleaning without having to change the critical crimp adjust-ment. Once your crimp die is set for the proper amount ofcrimp, you’ll never have to change it. This is especially goodnews for all of you who load lead bullets! Before, you had tounscrew the die from the toolhead and disassemble the die inorder to remove any bullet lube or lead residue. Then, youhad to start from square one to re-adjust the crimp. Thosedays are over. All you have to do now is pop a clip and thedie insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die,seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

Dillon Pistol Dies (Three-Die Sets).32 S&W/.32 H&R Magnum K95-14426 $63.95.380 ACP K95-14401 63.959mm Parabellum K95-14406 63.959x25 Dillon K95-14601 132.95.357 SIG K95-22083 132.95

.38 Super K95-14399 $63.95

.38 Special/.357 Magnum K95-14400 63.9510mm/.40 S&W K95-14398 63.95.41 Magnum K95-14402 63.95.44 Special/.44 Magnum K95-14403 63.95.45 ACP/.45 GAP K95-14404 63.95.45 Colt K95-14405 63.95Dillon Carbide Size/Deprime Dies .32 S&W/.32 H&R Magnum K95-14119 $33.45.380 ACP K95-14410 27.459mm Parabellum K95-14415 27.459x25 Dillon K95-14602 104.95.357 SIG K95-16513 104.95.38 Super K95-14408 27.45.38 Special/.357 Magnum K95-14409 27.4510mm/.40 S&W K95-14407 27.45.41 Magnum K95-14411 27.45.44 Special/.44 Magnum K95-14412 27.45.45 ACP/.45 GAP K95-14413 27.45.45 Colt K95-14414 27.45Dillon Seating Dies.32 S&W/.32 H&R Magnum K95-14106 $25.45.380 ACP K95-14419 25.459mm Parabellum K95-14424 25.459x25 Dillon K95-14603 28.45.357 SIG K95-16515 28.45.38 Super K95-14417 25.45.38 Special/.357 Magnum K95-14418 25.4510mm/.40 S&W K95-14416 25.45.41 Magnum K95-14420 25.45.44 Special/.44 Magnum K95-14421 25.45.45 ACP/.45 GAP K95-14422 25.45.45 Colt K95-14423 25.45Dillon Crimp Dies.32 S&W/.32 H&R Magnum K95-14107 $24.45.380 ACP K95-14438 24.459mm Parabellum K95-14443 24.459x25 Dillon K95-14604 27.45.357 SIG K95-16514 27.45.38 Super K95-14436 24.45.38 Special/.357 Magnum K95-14437 24.4510mm/.40 S&W K95-14435 24.45.41 Magnum K95-14439 24.45.44 Special/.44 Magnum K95-14440 24.45.45 ACP/.45 GAP K95-14441 24.45.45 Colt K95-14442 24.45Spare Decapping PinsPackage of 10 K95-21528 $5.75

Size Die• Floating Decap Assembly EliminatesPrimer “Draw Back”

• Long, Tapered Carbide Ring• Radiused Opening Makes ProgressiveLoading Smoother

Seat Die• Reversible Seating Stem Makes it Easy to Change Bullet Styles

Crimp Die• Quick Disassembly, Easy to Clean

35


Dillon Three-Die Rifle Die Sets include a sizing/depriming die, a bullet seating die and a taper crimpdie. Dillon Two-Die Rifle Die Sets include asizing/depriming die and a seat/crimp die.

Sizing/Depriming DieThe sizing/depriming die is full-length, to mini-

mum tolerances, sizing cases down to function insemi- and full-automatic firearms. We strongly sug-gest that a headspace case gage be used to correctlyadjust the size die.

For high volume users, such as commercialreloaders, law enforcement agencies, and highpower or service rifle competitors, we also offer .223and .308 die sets with a full-length carbide sizingdie. Lubrication is still required, but the increasedscratch resistance and die longevity of carbide are ofgreat benefit to these groups of users.

The depriming assembly includes a carbideexpander ball for “squeak-free,” effortless neckexpansion. This expander ball is located in the mid-dle of the depriming stem to take advantage of supe-rior initial leverage for easier extraction.

In the event of a stuck case, the design of thedepriming assembly allows it to function as a stuckcase remover.

Bullet Seating DieOur bullet seating die is internally designed to keep

the bullet straight throughout the seating process.Once properly adjusted, the only measurable runoutwill be that which is inherent in the bullet.

Taper Crimp DieThe taper crimp die is also specially configured to

center both the case neck and the case body, therebyaligning the entire cartridge for a more uniformcrimp. Dillon Rifle Dies are designed to meet themore rigid requirements for both accuracy and preci-sion demanded by today’s marksman.

A taper crimp die is preferred for loading ammu-nition intended to be used in semiautomatic firearmswith detachable box magazines, and in lever-actionfirearms with tubular magazines.

Dillon Rifle Dies (Three-Die Sets).223 Remington K95-10839 $66.95.308 Winchester K95-15574 66.95.30-06 Springfield K95-10840 66.95Dillon Carbide Rifle Dies (Three-Die Sets).223 Remington K95-10096 $162.95.30 M1 Carbine K95-62128 103.95.308 Winchester K95-10793 168.95.30-06 Springfield K95-62151 274.95Except where noted, die sets include three dies:carbide size/decap, a seater and a separate crimpdie. PLEASE NOTE: Carbide rifle dies still requirecase lubrication!Dillon Size Dies.223 Remington K95-12778 $41.95.223 Remington (Carbide) K95-10223 136.95.30 M1 Carbine (Carbide) K95-97039 72.95.308 Winchester K95-10242 41.95.308 Winchester (Carbide) K95-10234 149.95.30-06 Springfield K95-12238 41.95.30-06 Springfield (Carbide) K95-62150 224.95Universal Decapping Die K95-22127 $26.95Dillon Seat Dies.223 Remington K95-21672 $29.95.308 Winchester K95-21674 29.95.30-06 Springfield K95-21673 29.95Dillon Taper Crimp Dies.223 Remington K95-21676 $27.55.308 Winchester K95-21678 27.55.30-06 Springfield K95-21677 28.55Spare Decapping Pins.223 Remington K95-13278 $3.99.308 Winchester K95-13132 3.99.30-06 Springfield K95-13069 3.99For Universal Decapping Die K95-15816 3.99Spare Dillon Die Lock Rings (Fit all 7/8” x 14 thread dies)Dillon Die Lock Ring K95-14067 $1.355-Pack Die Lock Rings K95-10669 4.15

Size Die• Full-length, to minimum tolerance

• Carbide expander ball

• Features stuck case remover

Seat Die• Designed to hold bullet straight

throughout the seating process

Taper Crimp Die• Centers case neck and body for

a more uniform crimp

Hex Adjustmentsfor Wrench

Stuck Case Remover

Solid,1-Piece

DecappingPin

RadiusedMouth

Precise,Uniform

Taper CrimpSize DiePolishedto a High

Micro-Finish

Standard7/8 x 14Threads

CarbideExpander

Ball

Dillon’s Rifle Die Sets

By Larry DrakeWhen I select a bullet for competition shooting

there are a lot of factors that help me decidewhich bullet is the best choice. The bullet has tobe available, accurate, affordable and clean.Clean means a lot to me. Clean is so importantthat it’s a higher priority than affordable. I’ll paymore for clean because, to me, it’s worth it. Tradi-tionally, the choices havebeen between lead, plat-ed, moly coated and jack-eted bullets with each hav-ing pluses and minuses formy criteria. Now, withsome new players on thefield, it might be a goodtime to examine exactlywhich bullet is the best forthe volume of shooting Ilike to do.

Straight lead is thecheapest, generally thesmokiest and most proneto depositing lead where Idon’t want it – anywhereoutside the berm I’mshooting the bullet into!Frequently, the smoke iscaused by the lubricant that is applied to the out-side of the bullet. This lubricant is necessary and itdoes help reduce fouling, but the smoke it pro-duces is a problem in its own right. The problem iscompounded when shooting at night under over-head lights. Light reflecting off of the smoke canobscure your vision and make hitting – or evenseeing – the targets difficult. This smoke is causedby our choice of projectile and powder. The rightcombination can be nearly smoke free. The wrongcombination can resemble a coal-fired freight

train. Combine that with little-to-no wind andyou’ve got a problem. Leading is a problem aswell. Everyone thinks of leading as something thathappens in the bore. While that’s certainly a prob-lem as it can degrade accuracy and, in extremecases, create a dangerous situation, it isn’t the onlyplace a handgun will lead. I shoot a lot of revolvercompetition and lead residue builds up above the

forcing cone and on thecylinder face. Left unat-tended, that lead build upcan cause the cylinder tobind, and that super nicetrigger job turns into asuper heavy trigger. Thank-fully, a little work with awire brush and a scrapercleans it all up.

Plated bullets are a bitmore expensive and gener-ally have little-to-no prob-lems with smoke or leav-ing deposits of lead.Unfortunately, plated bul-lets are often somewhatsoft and cannot be pushedto higher velocities with-out shedding their plating

to reveal the softer lead underneath. There havealso been many reports of reduced accuracy withplated bullets. That being said, I’ve used platedbullets for years in various shooting matches andhaven’t had any problems with them.

Jacketed bullets are the most expensive, butcan be the cleanest, least smoky, bullets as well.Debates rage back and forth over whether or notthey are as accurate as lead bullets but in the endthey’re the only choice for certain applications.Gas-operated rifles, like the AR15, or compensat-

Let’s Quit Smoking (and get the lead out while we’re at it)

“Straight leadis the cheapest,generally thesmokiest andmost prone todepositing leadwhere I don’twant it.”

Hard CastLead

CopperJacketed

36

DP

ed handguns, for example, should never be runwith lead bullets. Jacketed, and some plated bul-lets, are the only way to avoid fouling theweapon and clogging up the gas system or lead-ing the compensator.

Over the last few years some new choices haveappeared and one in particular is looking reallypromising. J&M Specialty of Australia is marketinga bullet coating they callHi-Tek Lube. It is a poly-mer-based coating thatcompletely encapsulatesthe projectile to reducesmoking and virtuallyeliminate leading. Thecoating is applied via amethod that might best bedescribed as “shake andbake.” The lead bullets aresized before being placedin a bucket where a verysmall amount of the liquidpolymer coating is driz-zled onto them before theyare gently shaken to dis-tribute the coating. Afterdumping the bullets out tolet the coating dry, they’rebaked in a convection type of oven to cure thepolymer. Once cooled, the process is repeated asecond time to help build up a nice thick layer ofthe coating. Once the final cooling process iscomplete, the bullets are ready for resizing. Nolube or other prep is necessary.

Lead bullets coated with moly, or molybdenumdisulfide, have been around for several years aswell and they offer some of the same benefits asthe Hi-Tek coating. Smoke and leading arereduced, and the cost is usually in line with the

Hi-Tek coated bullets and a bit less than the platedvariety. They can be kind of messy during the actu-al reloading process as the moly coating can comeoff on your hands. That kind of mess doesn’t both-er me, just as long as the bullet shoots clean.

I’ve been shooting the Hi-Tek coated bulletsoffered by SNS Cast Bullets for several monthsnow and I’m pretty happy with the results.

They’re readily availableboth online and through alocal retailer (check theselection out in this verycatalog). They are accu-rate enough that I shot aone-hole group at 25yards with my 627 (even ifit was kind of a big hole).Pricing at Dillon is $78,which puts them at awhopping $4 more thanthe uncoated bullets.That’s right I said $4. Theysell this product as a kitthat you can apply your-self, but I think for $4 perthousand more I’ll let thepros take care of coatingthe bullets. Last, but not

least, they are clean. Clean enough, anyway. I’veshot several thousand of them through my pistolsand while there’s some smoke, it isn’t enough forme to notice while shooting. As far as leadinggoes, I haven’t had to get the wire brush or thescraper out since I’ve been using these bullets.

In the end, I may not have completely stoppedsmoking, but I think I’ve found a patch, or, if Iwant to be really current, an e-cigarette. Eitherway I’ve got less smoke, no lead and more moneyin my pocket. I think I’ll take that compromise.

Let’s Quit Smoking (and get the lead out while we’re at it)

“Over the last few years somenew choiceshave appearedand one in particular islooking reallypromising.”

CopperPlated

Hi-TekCoated

37

B. SL 900 MACHINE COvERThis heavy-duty nylon cover

comes equipped with a D-ring,allowing the zipper to be locked.K95-13239, $39.95

(C.) Master lockK95-13083, $3.95

B.

C.F. WINCHESTER SHOTSHELL WADS

A. SL 900 CONvERSIONS12 Gauge Conversion

K95-20009, $359.9520 Gauge Conversion

K95-22138, $359.9528 Gauge Conversion

K95-22139, $359.9520/28 Gauge Casefeed Plate(not pictured)

K95-97045, $42.95SL 900 Powder System

K95-17817, $76.95

WT12, 12ga, Orange 500 K95-15515 $11.95WAA12, 12ga, White 250 K95-15516 8.95WAA12SL, 12ga, Pink 250 K95-15517 8.95WAA20, 20ga, White 250 K95-15518 8.95WAA28, 28ga, Red 250 K95-15519 8.95WAA41, .410, Red 250 K95-15520 8.95

E. SPARE PARTS KIT1 20 Gauge Yellow Wad Guide1 28 Gauge Green Wad Guide1 20 Gauge Locator Pin1 Index Pawl1 Ring Indexer1 Index Spring Revision A1 Hair Pin Cotter2 Bellcrank Cubes1 Case Insert Slide Spring

1 Pawl Spring1 Ejector Wire1 Plastic Wad Guide1 Swing Arm Torsion Spring1 Primer Transfer Arm1 12 Gauge Locator Pin1 Gum Rubber Insert Revision B1 Shot Fitting E-Clip1 Failsafe Bushing Revision B

K95-11154, $26.95

D. PACKAgE DEALIncludes: Lyman ReloadingHandbook, Clear SafetyGlasses, Dial Caliper, Elimi-nator Scale, Machine Cover,and Low Powder Sensor.

K95-22290, $199.95

38

Dillon’s SL 900Dillon’s SL 900STANDARD FEATURES:• Automatic Indexing• Auto Powder/Priming Systems• Adjustable Case-Activated Shot System• Factory Adjusted to Load AA Hulls• Factory Adjusted Loading Dies• The Original Tilt-Out Wad Guide• Lifetime “No-B.S.” Warranty

All for ONLY...$91995

$1149.90 with Casefeeder12 Gauge K95-97110 20 Gauge K95-9712328 Gauge K95-97124 Comes with factory adjusted dies

Shotshell Loader


12 gauge Casefeeder (pictured) K95-97037 $229.9520/28 gauge Casefeeder K95-97036 $229.9512 ga. Euro. 220v Casefeeder K95-97118 $239.9520/28 ga. Euro. 220v Casefeeder K95-97125 $239.95Aluminum Roller Handle K95-17950 $45.95Low Powder Sensor K95-16306 $41.95


SL 900 Accessories

.32 Auto 5 pack K95-10923 $16.65

.380 Auto 5 pack K95-10795 16.659mm Luger 5 pack K95-10798 16.65.357 SIG 5 pack K95-10794 16.65.40 S&W 5 pack K95-10796 16.65.45 ACP 5 pack K95-10797 16.65.38 Special 6 pack K95-10801 19.98.357 Magnum 6 pack K95-10800 19.98.44 Magnum 6 pack K95-10802 19.98

.44-40 Winchester 6 pack K95-10803 19.98

.45 Colt 6 pack K95-10804 19.98

.223 Remington 2 pack K95-10810 9.99

.22-250 2 pack K95-10809 9.99

.243 Winchester 2 pack K95-10811 9.99


.30 M1 Carbine 2 pack K95-10813 9.99

.30-30 Winchester 2 pack K95-10815 9.99

.303 British 2 pack K95-10816 9.99


.30-06 Springfield 2 pack K95-10814 9.99

.45-70 Government 2 pack K95-10818 9.996.5x55 Swedish 2 pack K95-10819 9.997.62x39 Russian 2 pack K95-10820 9.9912 Gauge 2 pack K95-10805 9.9920 Gauge 2 pack K95-10806 9.9928 Gauge 2 pack K95-10807 9.99.410 Bore 2 pack K95-10808 9.99

Hard-anodized, solid alu-minum snap caps with a

secret “Dead Cap” insert thatprotects your firing pin andoutlasts brass by 20 times.Quite simply the best snapcaps we’ve ever seen.

A-ZOOM Ammo Premium Metal Snap-Caps

Saf-T-TrainerMolded PlasticDummy/TrainingAmmoSold in packages of five:.22 LR K95-10086 $4.959mm K95-10087 4.95.38/.357 K95-10088 4.95.40 S&W K95-10060 4.95.44 Mag. K95-10061 4.95.45 Colt K95-10061 4.95

.45 ACP K95-10062 4.95

.223 K95-10063 4.957.62x39 K95-10064 4.95.308 K95-10065 4.95.30-06 K95-10066 4.9520 Ga. K95-10067 7.9512 Ga. K95-10068 7.95

Made of super tough nylon with a melting point of 480degrees. Kit includes one shotgun chamber flag and one

for your AR-15. K95-15485 $11.95

Arredondo Accessories’ Multi-Gun Chamber Flags

39


UPLULA MAG LOADERADCO SUPERTHUMB® offers

models for popular cen-terfire pistols and 10/22style magazines. ST1 is for 9mm and .40caliber Beretta, Brown-ing, Ruger, SIGARMS,S&W, etc. In addition, theST1 has interior rails and grooves to accommodate Colt Govern-ment magazines. K95-18607 $7.95ST2 is for GLOCK and Para-Ordnance magazines.

K95-18608 $7.95ST3 handles virtually all centerfire, single-column magazines.

K95-18609 $7.95ST22 is for Ruger 10/22 rifles. K95-18610 $7.95STJR is for Ruger, Browning, Colt and High Standard .22 pistols.

K95-18611 $7.95

The UpLULA™ is a mili-tary quality personal

universal pistol magazineloader. Loads virtually all9mm, .357 SIG, .40 S&W,10mm and .45 single- anddouble-stack magazines.

K95-19239 $33.95

Comp-Tac’s Trojan Horse Long Gun CaseThe Trojan Horse Long Gun Case is the first of its kind: a

safe, comfortable, simple and unobtrusive way to carryyour long guns with you. No longer do you need to worryabout a casual observer spotting you with a “Gun” case asyou transport your long guns to and from your car. Instead allthey will see is a person with a sports bag. It measures 36”Long, 4”-15” Wide, 4” Deep and features rigid side panelsthat provide concealment with no printing; an adjustable,padded shoulder strap with side-release buckle on either end;a heavy duty zipper with tactical speed pull attachment forquick deployment; inside divider with Molle straps; and twoinside zippered pockets. Will hold up to 20” long barrel withcollapsible stock.Standard Trojan Horse Long Gun Case K95-19388 $75.00Heavy Rated Trojan Horse Gun Case K95-16229 100.00

40

A.

A. B.

C. D.

E.

B. C. D.

California Competition Works’ Tactical Strippers areavailable in three, four or six-shell versions that allow

quick access to your shotgun reloads. Engineered to carryup to 3” magnum* shells as well as the longer Europeanshotshells. All CCW Tactical Strippers are equipped witheither a belt clip (A. & B.) or a UM84 attachment device

(C. & D.) that will accommodate up to a 2-1/4” duty belt.A. Six-Shell Tactical Stripper K95-18606 $23.95B. Four-Shell Tactical Stripper K95-18605 22.95C. Three-Shell Aluminum Stripper* K95-19475 34.95D. Six-Shell Covered Tactical Stripper K95-19225 33.95*Three-Shell Aluminum Stripper accommodates 2-3/4” shells only.

12 Gauge Shotshell Tactical Strippers

TACCOM, LLC’s Duaload ShotshellHolder is available in 2-, 4-, or 6-

Shell versions and can be customized tocarry your shotgun ammo in several con-figurations. The 2Up version can be ei-ther attached to a belt or MOLLE gear,and the 4Up and 6Up versions feature aBLADETECH Tek-Lok™ Universal BeltClip (included) that can be attached atvarious angles. The Duaload allows youto grab two shotshells aligned in such amanner that it makes it easy to load twoat a time into your shotgun. 2Up Belt/MOLLE K95-19530 $9.954Up w/Tek-Lok™ K95-19531 29.956Up w/Tek-Lok™ K95-19532 34.95

TACCOM, LLC’sQuaload Shotshell

Holder is a seriousgame changer! It’s soradical that they arepatenting the device.The Quaload holds the2 columns of shells nextto one another, youcan't get any closer thanhaving them touch. Noother quad load device can do this! This allows for you to controlhow the shell come out of the holer and not have to worry about rimoverlay…the rims are already overlapped in the correct position!4Up Quaload Shotshell Holder K95-19543 $39.958Up Quaload Shotshell Holder K95-19544 69.95

AP Custom USA Shotshell Carriers/Caddies, Mag ID Kits

AP Custom USA’s Shotshell Caddies are 100-percentmachined from solid billet aluminum. The 4x4 Shotshell

Caddy holds four 2-3/4” 12 Ga. shells in two adjacent slots. The4x4 is designed for loading four shells at once, either strong- orweak-handed. The 3x3 Shotshell Caddy holds three 2-3/4” 12Ga. shells in two adjacent slots.

The QL/4 Shotshell Carrier is a four-round 12 Ga. “quad-load” system consisting of a single QL shell carrier mounted toan adjustable billet aluminum backer plate on a Blade-Tech Tek-Lok. The QL/4 backer plate allows the shooter to adjust the angleof the QL to his or her liking. The backer plate is also drilled andtapped to accept Safariland ELS and Blade-Tech MOLLE attach-ments. The QL/8 Shotshell Carrier is an eight-round 12 Ga.“quad-load” system consisting of a two QL/4 shell carriers.

AP Custom USA’s Mag ID Kits enable you to color code andnumber your P-Mags and pistol magazines.

A. QL/8 Shotshell Carrier K95-12220 $99.95B. QL/4 Shotshell Carrier K95-12219 49.95C. 4x4 Shotshell Caddy K95-14343 69.95D. 3x3 Shotshell Caddy K95-14344 69.95

Replacement Spring Kit K95-12221 14.95E. Pistol Mag ID Kit, Black K95-12222 13.95

Pistol Mag ID Kit, Blue K95-12227 13.95Pistol Mag ID Kit, Red K95-12229 13.95

F. P-Mag ID Kit, Black K95-12230 15.95P-Mag ID Kit, Blue K95-12232 15.95P-Mag ID Kit, Red K95-12233 15.95

TACCOM, LLC Tactical and Competition Accessories


F.

WARNINg: These products contain lead, which is known to cause birth defects, other reproductive harm and cancer. Handling components, ammunition, cleaning firearms or discharging firearms in poorly ventilated areas may result in lead

exposure. Have adequate ventilation at all times and wash your hands thoroughly after exposure.

42

TopBrassLoad-Ready Brass100% ReconditionedAll Top Brass, Inc. reconditionedbrass products receive a full visualinspection prior to packaging.

.223 Remington, 1000 K95-19545 $236.009mm Parabellum, 1000 K95-19546 129.99.40 S&W, 1000 K95-19547 149.99

.308 Cal., 168 gr., HPBT, 100/pkg. K95-19665 31.95“Famous Maker” Match Bullet Seconds

(This is not LOADED ammunition.)5.56mm/.224 Caliber 52 gr. HPBT MatchKing 100/box K95-10178 $25.9555 gr. BlitzKing 100/box K95-14458 28.9569 gr. HPBT MatchKing 100/box K95-13007 27.95

(Requires 1x7” to 1x10” barrel twist.)77 gr. HPBT MatchKing 500/box K95-18171 157.95

(Requires 1x7” to 1x10” barrel twist.)6mm/.243 Caliber 70 gr. HPBT MatchKing 100/box K95-12386 30.956.5mm123 gr. HPBT 100/box K95-14459 44.95142 gr. HPBT 100/box K95-14460 46.957.62mm/.308 Caliber168 gr. HPBT MatchKing 100/box K95-10177 42.95175 gr. HPBT MatchKing 100/box K95-17481 44.95

Unprimed brass sold in packages of 100 (This is not LOADED ammunition.)Description Stock # 1 Pkg. 5 Pkg. 10 Pkg..32 H&R Magnum K95-30258 $19.00 $88.00 $168.00.32-20 Winchester K95-31282 25.00 116.00 224.009mm K95-31277 17.00 79.00 152.00.38 Short Colt K95-39919 20.00 91.00 175.00.38 Special K95-31278 18.00 80.00 154.00.38 Super +P K95-31276 20.00 90.00 173.00.38 Super Comp K95-30257 20.00 90.00 173.00.357 SIG K95-30528 22.00 102.00 196.00.40 S&W K95-31283 20.00 93.00 180.0010mm K95-31281 21.00 98.00 188.00.45 ACP K95-31284 22.00 99.00 190.00.45 Auto Rim K95-31279 24.00 109.00 209.00.45 Colt K95-30259 24.00 111.00 214.00.500 S&W Magnum K95-38596 61.00 281.00 542.00

Description Stock # 250 500 1000Bullets for the 7.62 x 39 Cartridge 123 gr. RN-DS* K95-17210 $42.00 $81.00 $150.00.380 Caliber Bullets 100 gr. RN-DS* K95-17532 24.00 46.00 85.009 Millimeter Bullets115 gr. RN-DS* K95-17533 25.00 49.00 90.00115 gr. HBRN-TP* K95-17178 27.00 52.00 96.00124 gr. RN-DS* K95-17534 27.00 51.00 95.00124 gr. HBRN-TP* K95-17272 30.00 57.00 106.00124 gr. HBFP-TP* K95-17385 30.00 57.00 106.00147 gr. RN-DS* K95-17535 31.00 60.00 110.00.357 Caliber Bullets125 gr. FP-DS* K95-17536 28.00 53.00 98.00158 gr. RN-DS* K95-17540 33.00 63.00 117.00158 gr. FP-DS* K95-17539 33.00 64.00 118.00

.40 Caliber/10 Millimeter Bullets155 gr. FP-DS* K95-17541 35.00 68.00 126.00155 gr. HBRN-DS* K95-17238 36.00 70.00 130.00165 gr. FP-DS* K95-17232 36.00 70.00 130.00165 gr. HBFP-DS* K95-17271 41.00 79.00 146.00180 gr. FP-DS* K95-17542 38.00 74.00 137.00180 gr. RS-DS* K95-17515 35.30 68.26 127.00.45 Caliber Bullets185 gr. HBRN-DS* K95-17543 41.00 78.00 145.00185 gr. FP-DS* K95-17516 35.30 68.26 127.00200 gr. FP-DS* K95-17537 41.00 78.00 145.00200 gr. HBFP-DS* K95-17517 45.00 78.00 146.00230 gr. RN-DS* K95-17549 42.00 80.00 149.00Description Stock # 200 400 800.44 Caliber Bullets240 gr. FP-DS* K95-17545 39.00 76.00 140.00

Berry’s Manufacturing Preferred Plated Bullets

SierraRifle Bullets

*DS = Double Struck, TP = Thick Plate, HB = Hollow Base, RN = Round Nose, FP = Flat Point, SWC = Semi Wadcutter, WC = Wadcutter

StarlineBrass

Privi Partisan Projectiles.308 Cal. 150 gr. FMJ 100/pkg. K95-15809 $27.99.357 Cal. 158 gr. JHP 100/pkg. K95-15808 17.99.40 Cal. 180 gr. JHP 100/pkg. K95-15812 20.99.45 Cal. 230 gr. FMJ 100/pkg. K95-15813 22.99

ARMSCOR Projectiles.357 Cal. 158 gr. FMJ 100/pkg. K95-15819 $11.99.45 Cal. 230 gr. FMJ 100/pkg. K95-15814 15.99


Eliminates thesticky wax feel

lead bulletshave. 5 packK95-17108$6.95

GSIInternationalPre-Lube for Lead Bullets

Hard-Cast Lead Bullets Stock # 500 10009mm RN 115 gr. K95-15306 $39.00 $73.009mm RN 125 gr. K95-15258 40.00 74.009mm FP 125 gr. K95-15279 40.00 74.009mm RNFP 147 gr. K95-15259 43.00 80.00.38/.357 RN 95 gr. K95-15291 37.00 69.00.38/.357 RNFP 100 gr. K95-15260 38.00 72.00.38/.357 RN 125 gr. K95-15261 40.00 74.00.38/.357 RNFP 125 gr. K95-15307 40.00 74.00.38/.357 DEWC 148 gr. K95-15262 43.00 80.00.38/.357 SWC 158 gr. K95-15263 43.50 81.00 .38/.357 RN 158 gr. K95-15292 43.50 81.00.38/.357 RNFP 158 gr. K95-15264 43.50 81.00 .38/.357 RN 160 gr. K95-15281 43.50 81.00.40/10mm FP 140 gr. K95-15265 42.00 78.00.40/10mm SWC 175 gr. K95-15266 50.00 92.00.40/10mm FP 180 gr. K95-15267 50.50 94.00.40/10mm RN 200 gr. K95-15285 49.00 91.00.44 RNFP 180 gr. K95-15283 50.50 94.00.44 RNFP 200 gr. K95-15274 53.00 98.00.44 RNFP 240 gr. K95-15275 60.00 110.00.44 SWC 240 gr. K95-15276 60.00 110.00.45 SWC 185 gr. K95-15269 50.50 94.00.45 SWC 200 gr. K95-15270 53.00 98.00.45 RN 230 gr. K95-15271 57.00 106.00.45 Colt RN 160 gr. K95-15293 55.00 101.00.45 Colt RNFP 180 gr. K95-15295 51.00 94.00.45 Colt RNFP 200 gr. K95-15272 53.00 98.00.45 Colt RNFP 250 gr. K95-15273 63.00 118.00 Stock # 250 500.45/70 Govt. RNFP 405 gr. K95-15321 $64.00 $120.00

NEW! Coated Bullets Stock # 500 1000.30 M1 Carbine RN 115 gr. K95-15403 $43.00 80.00.380 RN 95 gr. K95-15393 40.00 $74.009mm RN 115 gr. K95-15394 41.00 76.009mm RN 124 gr. K95-15331 42.00 78.009mm FP 125 gr. K95-15396 42.00 78.009mm RN 125 gr. K95-15332 42.00 78.009mm No-Lube-Groove 125 gr. K95-15756 42.00 78.009mm FP 147 gr. K95-15333 47.00 88.009mm/.38 Super RN 160 gr. K95-15397 52.00 97.00.38/.357 RN 95 gr. K95-15858 40.00 74.00.38/.357 RNFP 100 gr. K95-15859 41.00 76.00.38/.357 FP 105 gr. K95-15860 42.00 77.00.38/.357 FP 125 gr. K95-15879 42.00 79.00.38/.357 RNFP 130 gr. K95-19679 44.00 81.00.38/.357 DEWC 148 gr. K95-15880 47.00 88.00.38/.357 SWC 158 gr. K95-15881 52.00 97.00.38/.357 RN 160 gr. K95-15400 52.00 97.00.40/10mm FP 140 gr. K95-15335 47.00 87.00.40/10mm RNFP 165 gr. K95-19677 55.00 101.00.40/10mm FP 175 gr. K95-15336 57.00 106.00.40/10mm FP 180 gr. K95-15337 58.00 107.00.40/10mm RN 200 gr. K95-15338 60.00 112.00.40/10mm FP 220 gr. K95-15855 66.00 123.00.44 RNFP 200 gr. K95-15882 60.00 112.00.44 SWC 240 gr. K95-15891 69.00 129.00.45 SWC 185 gr. K95-15856 58.00 108.00.45 RN 200 gr. K95-15339 60.00 112.00.45 RNFP 200 gr. K95-15857 60.00 112.00.45 SWC 200 gr. K95-15340 60.00 112.00.45 RN 230 gr. K95-15401 66.00 124.00.45 RN No Lube Groove 230 gr. K95-19678 66.00 124.00 Stock # 250 500.30/30 RNFP 158 gr. K95-15854 $27.00 $50.00

SNS Casting Hard-Cast Lead Bullets43

By John MarshallBack in the mid-1950s, the U.S. Air Force

sought a new small-caliber survival rifle to be partof their pilots’ emergency gear. It was to be used incase of ejection over hostile territory. Their requestwas for a .22 Hornet-chambered arm that would becompact, light and that could float in water. The AirForce was then using two main firearms designedfor downed pilot survival. The first of these was theM4 Survival Weapon. Designed in 1949 by (thenUSAF Major) Burton T. Miller, it was a bolt-actionrifle with a retractable wire stock, chambered forthe .22 Hornet. The second was the M6 AircrewSurvival Weapon, an over-under firearm designedand produced by Ithaca in 1951. It was chamberedfor the .22 Hornet and the .410 shotgun round.Responding to the Air Force request, a new survivalweapon was designed by Eugene Stoner ofArmaLite, then a division of Fairchild Aircraft.

The AR-5 was a lightweight 4-shot bolt actionin .22 Hornet. The action, magazine and detach-able barrel of the AR-5 could be stowed in itsremovable stock. It could float either stowed orassembled. This firearm was adopted by the AirForce in 1956 as the MA-1. However, with itslarge inventory of previous survival weapons, theAir Force never opted to actually place the MA-1into general issue. While Stoner was disappointedin this setback, he decided to develop a .22 semi-automatic survival rifle for the civilian market. Itwould be based on some of the concepts pio-neered with the AR-5, using much of the researchand tooling for that rifle.

Stoner, born in 1922, had an interesting history,and was destined to become one of the premierpost-WWII weapons designers. He attended highschool in Long Beach, California, but soon after-wards went to work for the Vega Aircraft Company,installing armament in airplanes. When America

became embroiled in World War II, Stoner enlistedin the Marine Corps. Working in aviation ord-nance, he served in the South Pacific and northernChina. Following the end of the war and his honor-able discharge from the Marines, he found work inthe machine shop of Whittaker, an aircraft equip-ment company. He became a design engineer, andin 1954, started work as chief engineer forArmaLite. Stoner is perhaps best known for design-ing lightweight combat rifles, notably the 7.62 x51mm AR-10. Its scaled-down offspring, the AR-15, morphed into the family of M16 weapons stillused by the U.S. and many other nations. His workon what became the AR-7 is a lesser-knownaccomplishment, but still a significant firearmsdevelopment.

First introduced by ArmaLite in 1959 as the“AR-7 Explorer,” it became instantly popular on thecivilian market. The rifle used a lightweight 16”detachable barrel, first made of aluminum (latercomposite polymer) with a steel liner. Whendetached, it would fit into the plastic stock alongwith the aluminum receiver and an 8-round single-stack magazine. Capping the stock with a rubberbuttplate, the disassembled and stowed rifle meas-ured just 17-1/2” in length. Overall length whenassembled was 35-1/4”. The action was a conven-tional blowback type, with a pull-out operatinghandle in the bolt and a pivoting safety lever onthe right side. The magazine was released with alever located in the forward part of the triggerguard. The keyed barrel slid into the externallythreaded forward part of the receiver. A multi-grooved threaded nut mounted around the barrelscrewed onto the receiver threads, tightening thebarrel firmly into the receiver. The rear sight was asimple aperture plate, crudely adjustable for eleva-tion, and locked into position with a single screw.The front sight was ramped, and could be adjustedfor windage by tapping it in its dovetail either rightor left as necessary. The right side of the receiverfeatured the ArmaLite “Pegasus” flying-horse-super-imposed-on-crosshairs logo. Below that, cast intothe receiver, was “AR-7/EXPLORER/COSTA MESA,CALIF. U.S.A./PATENTS PENDING.” The serial

number was stamped vertically into the forwardportion of the trigger guard. The barrel was marked“.22 LONG RIFLE ONLY” on its right side.

The stock, buttplate, receiver, magazine andbarrel had a gloss black finish, while the bolt andoperating handle were not blued. Very early stockscan be found with a solid brown or marbled/swirled brown color. There was no hold-opendevice, and the bolt did not lock back on the lastshot. The cartridge feed ramp was made part of themagazine. The stock was secured when assembledto the receiver with a long thumbscrew, the headof which was recessed into the pistol grip. On theleft side of the receiver, a single screw retained asideplate. When this was removed, it allowedaccess to the trigger and hammer mechanism forcleaning and lubrication. The screw could alsosecure a special scope mount to the receiver ifdesired. Extra-capacity aftermarket magazines of10, 15, 20 and 50 rounds quickly appeared on themarketplace. These, of course, would not fit forstorage into the stock. The twin recoil springs onthis rifle are fairly stiff, and require high-speedammo for reliable functioning. Accuracy, while notstellar, is sufficient for use on small game up to 50yards. The trigger pull is of only average quality.

The AR-7 has been popular as a survival andplinking rifle since its introduction. Disassembledand stowed, it fits easily into a backpack, andweighs a scant 2.5 pounds. Contrary to its use bySean Connery as James Bond in the 1963 movie“From Russia With Love,” it’s probably not the bestthing for bringing down helicopters. That movie,however, did tend to boost sales! The stowed rifledoes fit easily into a briefcase, giving it some utili-ty for covert activity by secret agents who mightneed such things.

ArmaLite shipped some AR-7s to Israel as sur-vival weapons. The Israelis modified them with atelescoping stock, a pistol grip, a Mauser K98k-type front sight, and shortened barrel. Some havebeen re-imported to the United States with a per-manently mounted muzzle brake to meet our 16-inch minimum requirement. These are valued col-lector items now.

In 1973, ArmaLite sold the manufacturing andsales rights to the AR-7 to Charter Arms. The rifleillustrated here bears ArmaLite markings, but was

sold in a Charter Arms box marked with its serialnumber in January of 1974. An original ArmaLitegun in a transitional box has now become asought-after collector item. This pretty well nailsthe manufacturing date on this particular gun assometime in late 1973. When Charter Arms beganmanufacture, there were some initial reports ofspotty quality control, reliability issues andwarped barrels. These things were apparently cor-rected in later production. Charter Arms produceda pistol version of the AR-7 called the Explorer II.Looking a bit like the Mauser C96 “broomhandle,”it had a built-in pistol grip that accepted a spare 8-round magazine. The rear sight was an open notchtype adjustable for both windage and elevation.The usual barrel length was 8 inches. The barrelsof the rifle and pistol are not interchangeable.Modifying a rifle receiver and a pistol barrel tomake a short-barreled rifle is illegal unless properfederal registration and payment of a $200 tax isaccomplished first.

An outfit known as AR-7 Industries made solidsteel barrels for the AR-7, which of course weremuch heavier, and tended to defeat the lightweightobjective of the original design.

In 1980, Charter sold the rights to the AR-7 toHenry Repeating Arms. Some of their rifles havebeen marked “Survival Arms.” Henry made someminor revisions to their product. ABS thermoplasticmaterial has replaced the original plastic for thestock. This gives better impact resistance andresilience. The stock can now accommodate threemagazines (1 in the receiver, 2 spares). The latestversions are billed as completely waterproof,unlike the previous types that could leak water intothe stock when submerged. It would still be pru-dent to wrap some waterproof tape around thebuttplate seam to be sure. A Picatinny-style rail iscurrently incorporated into the receiver for scoperings, and a Teflon coating is employed.

The AR-7 continues in its popularity to this day.With collectors, the original guns with ArmaLitemarkings command a premium. I think Gene Ston-er would be proud of how his invention has per-formed in the marketplace over the years. Sadly,this prolific firearms designer died on April 24,1997, leaving an impressive legacy of many iconicand classic firearms.

44 CLASSIC FIREARMS: The ArmaLite AR-7 Survival Rifle

By John MarshallBack in the mid-1950s, the U.S. Air Force

sought a new small-caliber survival rifle to be partof their pilots’ emergency gear. It was to be used incase of ejection over hostile territory. Their requestwas for a .22 Hornet-chambered arm that would becompact, light and that could float in water. The AirForce was then using two main firearms designedfor downed pilot survival. The first of these was theM4 Survival Weapon. Designed in 1949 by (thenUSAF Major) Burton T. Miller, it was a bolt-actionrifle with a retractable wire stock, chambered forthe .22 Hornet. The second was the M6 AircrewSurvival Weapon, an over-under firearm designedand produced by Ithaca in 1951. It was chamberedfor the .22 Hornet and the .410 shotgun round.Responding to the Air Force request, a new survivalweapon was designed by Eugene Stoner ofArmaLite, then a division of Fairchild Aircraft.

The AR-5 was a lightweight 4-shot bolt actionin .22 Hornet. The action, magazine and detach-able barrel of the AR-5 could be stowed in itsremovable stock. It could float either stowed orassembled. This firearm was adopted by the AirForce in 1956 as the MA-1. However, with itslarge inventory of previous survival weapons, theAir Force never opted to actually place the MA-1into general issue. While Stoner was disappointedin this setback, he decided to develop a .22 semi-automatic survival rifle for the civilian market. Itwould be based on some of the concepts pio-neered with the AR-5, using much of the researchand tooling for that rifle.

Stoner, born in 1922, had an interesting history,and was destined to become one of the premierpost-WWII weapons designers. He attended highschool in Long Beach, California, but soon after-wards went to work for the Vega Aircraft Company,installing armament in airplanes. When America

became embroiled in World War II, Stoner enlistedin the Marine Corps. Working in aviation ord-nance, he served in the South Pacific and northernChina. Following the end of the war and his honor-able discharge from the Marines, he found work inthe machine shop of Whittaker, an aircraft equip-ment company. He became a design engineer, andin 1954, started work as chief engineer forArmaLite. Stoner is perhaps best known for design-ing lightweight combat rifles, notably the 7.62 x51mm AR-10. Its scaled-down offspring, the AR-15, morphed into the family of M16 weapons stillused by the U.S. and many other nations. His workon what became the AR-7 is a lesser-knownaccomplishment, but still a significant firearmsdevelopment.

First introduced by ArmaLite in 1959 as the“AR-7 Explorer,” it became instantly popular on thecivilian market. The rifle used a lightweight 16”detachable barrel, first made of aluminum (latercomposite polymer) with a steel liner. Whendetached, it would fit into the plastic stock alongwith the aluminum receiver and an 8-round single-stack magazine. Capping the stock with a rubberbuttplate, the disassembled and stowed rifle meas-ured just 17-1/2” in length. Overall length whenassembled was 35-1/4”. The action was a conven-tional blowback type, with a pull-out operatinghandle in the bolt and a pivoting safety lever onthe right side. The magazine was released with alever located in the forward part of the triggerguard. The keyed barrel slid into the externallythreaded forward part of the receiver. A multi-grooved threaded nut mounted around the barrelscrewed onto the receiver threads, tightening thebarrel firmly into the receiver. The rear sight was asimple aperture plate, crudely adjustable for eleva-tion, and locked into position with a single screw.The front sight was ramped, and could be adjustedfor windage by tapping it in its dovetail either rightor left as necessary. The right side of the receiverfeatured the ArmaLite “Pegasus” flying-horse-super-imposed-on-crosshairs logo. Below that, cast intothe receiver, was “AR-7/EXPLORER/COSTA MESA,CALIF. U.S.A./PATENTS PENDING.” The serial

number was stamped vertically into the forwardportion of the trigger guard. The barrel was marked“.22 LONG RIFLE ONLY” on its right side.

The stock, buttplate, receiver, magazine andbarrel had a gloss black finish, while the bolt andoperating handle were not blued. Very early stockscan be found with a solid brown or marbled/swirled brown color. There was no hold-opendevice, and the bolt did not lock back on the lastshot. The cartridge feed ramp was made part of themagazine. The stock was secured when assembledto the receiver with a long thumbscrew, the headof which was recessed into the pistol grip. On theleft side of the receiver, a single screw retained asideplate. When this was removed, it allowedaccess to the trigger and hammer mechanism forcleaning and lubrication. The screw could alsosecure a special scope mount to the receiver ifdesired. Extra-capacity aftermarket magazines of10, 15, 20 and 50 rounds quickly appeared on themarketplace. These, of course, would not fit forstorage into the stock. The twin recoil springs onthis rifle are fairly stiff, and require high-speedammo for reliable functioning. Accuracy, while notstellar, is sufficient for use on small game up to 50yards. The trigger pull is of only average quality.

The AR-7 has been popular as a survival andplinking rifle since its introduction. Disassembledand stowed, it fits easily into a backpack, andweighs a scant 2.5 pounds. Contrary to its use bySean Connery as James Bond in the 1963 movie“From Russia With Love,” it’s probably not the bestthing for bringing down helicopters. That movie,however, did tend to boost sales! The stowed rifledoes fit easily into a briefcase, giving it some utili-ty for covert activity by secret agents who mightneed such things.

ArmaLite shipped some AR-7s to Israel as sur-vival weapons. The Israelis modified them with atelescoping stock, a pistol grip, a Mauser K98k-type front sight, and shortened barrel. Some havebeen re-imported to the United States with a per-manently mounted muzzle brake to meet our 16-inch minimum requirement. These are valued col-lector items now.

In 1973, ArmaLite sold the manufacturing andsales rights to the AR-7 to Charter Arms. The rifleillustrated here bears ArmaLite markings, but was

sold in a Charter Arms box marked with its serialnumber in January of 1974. An original ArmaLitegun in a transitional box has now become asought-after collector item. This pretty well nailsthe manufacturing date on this particular gun assometime in late 1973. When Charter Arms beganmanufacture, there were some initial reports ofspotty quality control, reliability issues andwarped barrels. These things were apparently cor-rected in later production. Charter Arms produceda pistol version of the AR-7 called the Explorer II.Looking a bit like the Mauser C96 “broomhandle,”it had a built-in pistol grip that accepted a spare 8-round magazine. The rear sight was an open notchtype adjustable for both windage and elevation.The usual barrel length was 8 inches. The barrelsof the rifle and pistol are not interchangeable.Modifying a rifle receiver and a pistol barrel tomake a short-barreled rifle is illegal unless properfederal registration and payment of a $200 tax isaccomplished first.

An outfit known as AR-7 Industries made solidsteel barrels for the AR-7, which of course weremuch heavier, and tended to defeat the lightweightobjective of the original design.

In 1980, Charter sold the rights to the AR-7 toHenry Repeating Arms. Some of their rifles havebeen marked “Survival Arms.” Henry made someminor revisions to their product. ABS thermoplasticmaterial has replaced the original plastic for thestock. This gives better impact resistance andresilience. The stock can now accommodate threemagazines (1 in the receiver, 2 spares). The latestversions are billed as completely waterproof,unlike the previous types that could leak water intothe stock when submerged. It would still be pru-dent to wrap some waterproof tape around thebuttplate seam to be sure. A Picatinny-style rail iscurrently incorporated into the receiver for scoperings, and a Teflon coating is employed.

The AR-7 continues in its popularity to this day.With collectors, the original guns with ArmaLitemarkings command a premium. I think Gene Ston-er would be proud of how his invention has per-formed in the marketplace over the years. Sadly,this prolific firearms designer died on April 24,1997, leaving an impressive legacy of many iconicand classic firearms.

45

DP

CLASSIC FIREARMS: The ArmaLite AR-7 Survival Rifle

Eugene Stoner’s work on what became theAR-7 is a lesser-known accomplishment.

Speed up the round-checkingprocess when you’re getting

ready for a match! EGW usesactual Clymer chamber reamersto produce its chamber checkers.Pistol Chamber Checker 9mm K95-19846 $19.95.38 Super K95-19847 19.95.40 S&W K95-19848 19.9510mm K95-19676 20.00.45 ACP K95-19849 19.95

Cowboy Chamber Checker(.357 Mag.,.44 Mag., .44-40,.45 Colt) K95-25375 $19.95Rifle Chamber Checkers .223 Rem.K95-25377 $29.955.56x45 K95-25376 29.95.308 Win. K95-18964 39.95.30-06 K95-19675 45.00Shotgun Chamber Checker 12 Ga. K95-19523 $49.9920 Ga. K95-19524 49.99

Evolution Gun Works Chamber Checkers


46

• .100 per revolution.• Covered track for longer caliper life –keeps chips out!• Made of hardened stainless steel.• Satin chrome finish. No glare.• Easily read to .001-inch on large,

adjustable dial.• Measuring faces hardened, ground

and lapped.K95-13462 $28.00

Stainless Steel Dial Caliper

HighTechDigitalCaliper

K95-17171 $39.95

Accurate,Easy to Read!

The SHELLSORTER is a simple product designed to reducethe time you spend sorting brass, allowing you to enjoy

more time reloading and shooting. The SHELLSORTER iscomprised of three pans designed to sort several commoncalibers. The fastest way to sort is to stack all three of thepans together on a common five-gallon bucket, yellowpan on top and black on the bottom; in that way, with afew shakes all your brass is sorted by caliber at the sametime. The SHELLSORTER is made of ABS, a strong plasticthat will give a lifetime of service.

K95-19972 $39.95

Pick up your brass the easy way! This takes the hardwork out of policing up your brass. No more aching

back from bending over or kneeling at the range!K95-21894 $44.95

SAVE YOUR BRASS!

Nobody’s perfect. A bullet pullermakes it easy to recover all your

components.Bullet Puller K95-17999 $29.95Puller Cap K95-17948 4.95Collet Set K95-17947 5.99

Bullet Puller

Competition Reloading withBrian Enos guides you through

a complete step-by-step reloadingprocess for IPSC, Steel Challengeand NRA Bianchi Cup style shoot-ing. Using a Dillon Precision XL650 reloader with CP brass and CPbullets, Enos demonstrates properreloading techniques for the mostpopular loads used by the topshooters. Enos is, of course, a cham-pion himself, winner of the Masters Competition, theNRA Bianchi Cup and a top contender in the USPSA formany years. Run time: 80 minutes.

K95-14341 $19.95

This replacesthe grips on

S&W J-Frameround buttrevolvers.A hook onthe rightgrip panelfunctionsas stop-ping pointfor therevolver when tucked into your waistband.

K95-19371 $29.99

47

Dillon’s “Plan B” Day Planner Holster holds a handgunand a spare magazine or pepper spray, yet it fits in with

business clothing and won’t draw undue attention. It lookslike a typical day planner, but inside there’s a holster that’sadaptable for either right- or left-hand draw. It fits most.380, 9mm, .40 and .45 caliber autos, including: Beretta,Colt, GLOCK, HK, Kahr, Kel-Tec, Ruger, Taurus, SIG, andSmith & Wesson. Will also hold small-frame revolvers withtwo- to four-inch barrels. “Plan B” Day Planner K95-10252 $24.95

$4500

K95-18193

Concealed Carry Tote

Dillon’s Concealed Carry Tote accommodates all the toolsyou need to survive the urban jungle!

This low-profile carry case looks like a mild-mannered-computer-nerd accessory, but it’s designed for your pistol aswell as your PC! Made of rugged fabric, with heavy dutyzippers on all three main compartments – one designed tohold a laptop computer, one for folders and paperwork,and one in the middle for a handgun.

Inside the case are pockets and pouches that will holdspare magazines as well as folding knives, letter openers,flashlights, cell phones, full-sized 8.5” x 11” paper notepads, etc. Measures 13.5” x 11.5” x 6.5” deep.

‘Plan B’ Day Planner

Front view with flap.

TUFF PRODUCTS MAG POUCHES

Front view without flap. Rear shows loops and Molle fasteners.

Tuff Products Magazine Pouches are the most versatile we’ve everseen. They can be worn on a belt or attached to anything that has

a MOLLE fastener system; for instance, the Dillon Range Bag, a tacti-cal vest or body armor carrier. Available in black or coyote brown.

Black 8-Magazine Single-Stack (1911) K95-19854 $39.95Brown 8-Magazine Single-Stack (1911) K95-19855 39.95Black 5-Mag. Double-Stack (9/.40 GLOCK) K95-19856 39.95Brown 5-Mag. Double-Stack (9/.40 GLOCK) K95-19857 39.95

THE STINGER:Comtech’s

own per-sonaldefensedevice. Designedto act as a “force multipli-er,” it’s like having the punching power of akarate master – instantly! There’s really noth-ing like it for easy carry and access.It passesun-noticed by 90 percent of people who seeit. Yup, just another “keychain device” tomost, and yet it works so well when needed.You deserve a Stinger today!

K95-19495 $9.95

Comtech’sSTINGER


DeSantisClip-Grip®

Baschieri & Pellagri12 Ga. Target SlugBaschieri & Pellagri12 Ga. Target Slug

K95-19214 $21.00

Reduced recoil, 1200 fps25 per box

48

By Robin Taylor, www.taylorfreelance.comNot many “serious” shooters wear a Mohawk.

Or have summer jobs picking berries. Much lessshoot with a high school pistol team.

Enter Jordon Castro. Affable, quirky, and dis-tinctly American, he’s a new face in a new sportcalled SPP – the Scholastic Pistol Program. Castrogave up rugby to take up pistol shooting a coupleof years ago, and found his groove with SPP. At hisfirst major SPP event in July, Jordon blasted hisway through “the 4-minute-mile” of student steel –the “40-second barrier” – shooting a combinedtime of 39.37. He’s atypical teenager in agreat many ways,and his story showshow youth steelteams (typical of SPP)are changing thelandscape of our“shooting culture.”

SPP supplantedan older program runby the now-dissolvedSteel ChallengeShooting Associationa couple of yearsago. It’s a simplifiedversion of Steel Chal-lenge, and hundredsof students are dis-covering speedshooting through it.Critically, SPP is aTEAM sport, playedby full-time studentsage 12 and up. Youneed a 4-personteam to play.

With the supportof the ScholasticShooting SportsFoundation, SPP has found “traction” like youcan’t believe, dotting the calendar with statechampionships, regional and national events. Eventhe normally staid NRA has climbed on board,offering SPP-specific coaching certification.

Scholastic PushSPP Director Scott Moore and his associate

Tammy Mowry have wisely taken on the trappingsof NCAA-like competition. This year they startedawarding an all-American-style designation, andsponsors like S&W and HiViz Shooting Systemshave begun bankrolling small college scholar-ships. Together, that’s raising the prestige and theintensity.

While nobody’s getting a full-ride-scholarshipas yet, a few thousand makes a tremendous differ-ence in the financial life of a student – and in theattitude of the parents.

All this support (and success) in a program thatDIDN’T EXIST five years ago? That’s amazing!

Endowment Grants = Long Term StabilityShooting takes money, and travel more so. To

offset that, Larry and Brenda Potterfield havestepped in to bankroll grants that help local teamsbuild up an endowment account to pay for suchthings long-term. The Potterfields (who deserve tobe knighted for this) give hundreds of thousands ofdollars to SPP and others, who in turn offer partici-pation and prize purses to competitive teams.When teams compete in major events, they can

win four- and five-figure endowmentcontributions, oftenjust for showing up.Jordon’s team alonehas built up anendowment worthmore than $125,000– about 1/4 of whichcame from winningmatches. They canonly draw 5 percentper year, but that 5percent yields morethan $5,000 forammo, travel, uni-forms, etc.

Surprisingly, thisprogram got rollingin blue-state NewEngland, spreadingup and down the EastCoast: Harvard has ateam; West Point;University of Vermont(UVM); Florida State;and MassachusettsRevolver Club.They’re overcominginstitutional resist-

ance to do the politically impossible. Yale still won’tallow its student team to call itself the “Yale” pistolteam, so the students pick a euphemism (“Yela” or“Yalu”) and show up anyway!

How It Works:SPP shooters shoot four specific arrangements

of steel plates. You shoot each arrangement fivetimes as quickly as possible, dropping your slow-est run. (The match requires a total of 100 rounds.)Fastest 4-person team wins.

While Jordon set the national record in rimfireat the nationals, one guy doesn’t make a team. Theexcellent South Texas Juniors won the SPP Nation-als in rimfire with a team time of 184 seconds –Jordon and “Team Gotta” placed second at 192.

Students in SPP come from all walks of life.You’ll find the American “melting pot” on displayhere – and Jordon brings much of that together in

Jordon Castro – New Face in a New Game

49

DP

one person. Jordon looks Hispanic, but he’s actu-ally Filipino/Japanese on his father’s side, and Ger-man/Welsh/Polish on his mother’s.

“People expect me to speak Spanish, especiallywhen I’m picking,” says Jordon – but the family’ssecond language is French!

Getting To The TopJordon and teammate Adam Thomas steam-

rolled their way through various local junior titlesuntil the Steel Challenge World Championship thisyear, when Jordon got a rude surprise.

For the first time he “got owned” by anotherjunior – Idaho NSSF whiz Kolby Pavlock.

“For the SPP Nationals, I took it a lot more seri-ously,” says Jordon.

He wasn’t the only one. SPP participationexploded this year, drawing 328 athletes from 15states to the SPP Junior/Senior Nationals in Sparta,Ill. A separate event for College teams happens inMarch at Fort Benning.

“We’ve seen amazing growth at this year’s Jun-ior/Senior Nationals – over 50 percent,” says ScottMoore. “We’ve become the largest youth actionevent in the country.”

Jordon spent a month dryfiring in his basement,hitting team practices, and shooting side eventsgeared to sharpen his game. Right up to the nightbefore the match, Jordon and his teammates hadposters showing the course layout taped up in oneof their hotel rooms. They took turns dryfiring thecourse over and over again with a SIRT laser trainer.

“The poster really helped a lot,” says Jordon. “Itreally helped me figure out the timing of eachstage.”

Using a tip from NSSF Champion Ron Stricklin,Jordon burned down the SPP stage called “Go Fast.”

“Go Fast” puts four big 18” x 24” plates 10yards away, with a 12” stop plate in the middle.Shooting all five takes an average competitor 2.5seconds. If your four runs total less than 8 sec-onds, you’re competitive nationally.

Jordon did it in 6.05!SPP Gear

New SPP shooters start out with an iron-sighted.22, and transition to a 9mm service pistol like aGlock or S&W M&P over time.

Jordon shoots a plain-looking Browning Buck-mark in “senior rimfire.” His teammates shoot amix of unremarkable S&W 22As, Rugers, Buck-marks, etc. Students can shoot rimfire for twoyears before the SPP rules force them to shoot9mm. Jordon’s already shooting a Glock 34 inpractice, preparing for that transition.

Rimfire Ammo For The KidsJordon and the other SPP kids would be fin-

ished without the .22 ammo supplies flowing tothem from Winchester, ATK and Fiocchi. At bigSPP events, teams can typically buy 4,000 roundsof Winchester M22 for about $205. Once a year,teams can buy as much as 15,000 rounds fromATK. As we shooters well know, that’s huge. Thesponsors see the value in what Moore and compa-ny are doing, and (like the Potterfields) they’reinvesting in America’s youth.

SPP is changing the shooting culture, and push-ing back against the anti-gun dynamic in ourschools. Young shooters like Jordon are taking onshooting as their primary sport, and industry lead-ers have put up the money to make that dreampermanent. If you’d like to learn more, look upSPP on the Scholastic Shooting Sports Foundationwebsite, sssfonline.org.

Jordon Castro – New Face in a New Game

Gun-tips® Extended Reach FirearmCleaning swabs by Swab-its® revolu-

tionize the way you clean your gun. Thefoam tips are lint free, reusable and ideal forcleaning trigger assemblies, slide rails,springs, extractors and anywhere else spaceis tight. 24 per package.

K95-12583 $9.99

Gun-tips®

Bore-Whips™ .17 and .22 caliber (pic-tured) by Swab-its® are ideal for air

rifles, rimfires or any other .17 or .22 cal-iber firearm that’s difficult to clean fromthe breach. The foam tips are reusable andthe handle functions as an empty chamberindicator. .17 Cal. K95-12689 $9.99.22 Cal. K95-12690 9.99

Bore-Whips™

Gun-tips® foam swabs are reusable andreplace cotton swabs. 9-pack

K95-15316 $4.99

Gun-tips®

E. 50 BMg PRIMER POCKET SWAgERMakes it easy to remove the military crimp.

K95-50001, $299.95

E.(1) PRIMINg CONvERSIONConverts Swager to Priming System.

K95-50003, $76.95

F. 50 BMg PRIMINg SySTEMAllows off-the-machine primer seating.

K95-50002, $299.95

F. (1) SWAgER CONvERSIONConverts Priming Systemto Swager.

K95-50004, $76.95

STANDARD FEATURES:• 4-Station Interchangeable Toolhead• Uses Std. 1-1/2”-12 UNF Thread Dies• Manual Shellplate indexing• Average Loading Rate: 300 Rds./Hr.• Loads High Volume/Match-Grade Ammo• Milspec/Match-Grade Priming System• Ductile Iron/Carbon Steel Construction

All for ONLY...$101995

K95-50000

“Big Fifty Reloader”“Big Fifty Reloader”


.50 BMg Carbide Size Die K95-50075 $869.95

.50 BMg Case Trimmer K95-50050 $384.95BFR Mounting Post (50.5” High) K95-50150 $269.95BFR Mounting Hardware Kit K95-50140 $9.95

C. 50 BMg POWDERMEASURE ADAPTERFor use with the RCBS .50BMG powder measure.

K95-50125, $76.95

D. 50 BMg PRIMER SEATINg DIEOne of these is included with Dillon’sBig Fifty Reloader, but may be used as anaccessory on a separate toolhead. Theprimer seating die is adjustable forenhanced control of primer seating.Includes two primer punches: one flat,match-style primer punch and onecupped, milspec primer punch.

K95-50200, $149.95

A. 50 BMg CASE TRIMMERASSEMBLyFeatures an industry standard1-1/2”-12 UNF threaded body,a 1/4 HP motor, replaceablecarbide cutter, quick-discon-nect cord and includes the .50BMG trim die.

K95-50050, $384.95

B. 50 BMg CARBIDE SIzE DIEThe only .50 BMG size die in the indus-try that’s a full-length solid carbide sizedie, for increased die life and scratchresistance. It also has a solid carbideexpander ball, placed in the middle ofthe power stroke for easier operation.The die body is standard 1-1/2”-12 UNFthread, and is manufactured to lowchamber tolerance specifications.

K95-50075, $869.95

BFR Accessories

RCBS LOADINg ACCESSORIES THAT CAN BEUSED WITH DILLON’S BIg FIFTy RELOADER.50 BMG Manual Powder Measure K95-21896, $114.95.50 BMG Seat/Crimp Die K95-21895, $139.95

A.

B.

C.

D.

E./F.

ExTRA “BFR” TOOLHEADS K95-19831, $179.95

5050

Now Available!.408 CheyTac Conversion

K95-50204 $149.95(Dies NOT Included)

These 532 gram DESI®PAK desiccants absorb moisture better than sili-ca gel. It’s an industrial grade material that exceeds the requirements

of Mil Spec MIL-D-3464E. Now available in smaller packages for otherapplications (ammo cans, long-term storage containers, etc.).DESI®PAK (2 bags, 1 card) K95-21435 $16.954-ounce bag K95-14694 4.952-ounce bag K95-14695 2.95Humidity Indicator Card, 6 pack K95-21523 4.95

Thinking about burying some guns?

Dillon Bushing Wrench

K95-11049 $2.50

51

Dillon Precision, Long SleeveNavy, Large K95-18507 $19.95Navy, xL K95-18508 19.95Navy, xxL K95-18509 20.95Navy, xxxL K95-18510 22.95gray, Large K95-18523 19.95gray, xL K95-18524 19.95gray, xxL K95-18525 20.95gray, xxxL K95-18526 22.95Black, Large K95-18515 19.95Black, xL K95-18516 19.95Black, xxL K95-18517 20.95Black, xxxL K95-18518 22.95

Dillon Precision, Short SleeveNavy, L K95-18511 $12.50Navy, xL K95-18512 12.50Navy, xxL K95-18513 14.50Navy, xxxL K95-18514 14.50gray, Large K95-18527 12.50gray, xL K95-18528 12.50gray, xxL K95-18529 14.50gray, xxxL K95-18530 14.50Black, Large K95-18519 12.50Black, xL K95-18520 12.50Black, xxL K95-18521 14.50Black, xxxL K95-18522 14.50

The Dillon Deluxe Pistol Cleaning Kit

Dillon’s Deluxe Pistol Cleaning Kit includes: a DeweyNylon Coated Cleaning Rod; Dewey bronze bore

brushes in .22, .38, .40 and .45; a Dewey patch loop; aDewey Nylon Gun Parts Cleaning Brush; a 4 oz. spraybottle of M-Pro 7 Gun Cleaner; a 0.5 oz. bottle of SnakeOil; and a 4cc tube of Snake Oil Weapon Grease. Comespackaged in Dillon’s Large Utility Box.

K95-97066 $56.95

Sack-Ups Protective gun SacksNEW! AR-15 Style Rifles K95-17378 $24.99Handgun, 13.5” Gray K95-17249 7.99Handgun, 13.5” Black K95-17250 7.99Handgun, 13.5” Natural K95-17252 7.99Shotgun, 42” Black K95-17253 10.99Rifle/Shotgun, 52” Gray K95-17247 8.99Rifle/Shotgun, 52” Black K95-17248 10.99Rifle/Shotgun, 52” Natural K95-17251 8.99Muzzleloader, 72” Gray K95-17254 11.99Shotgun Rcvr., 24” Gray K95-17257 8.99Shotgun Bbl., 36” Gray K95-17256 8.99Sack-Ups Old West gun ProtectionSingle-Action Revolver K95-18000 $8.99Lever-Action Carbine 42” K95-18001 10.99Buffalo Rifle 48” K95-18003 10.99

SACK-UPS“SAFE SACKS” FOR YOUR GUNS

K95-11319 11.95

YOU Can Wear The “Dillon” Brand

An easy, affordable way to protect your favorite 1911’sframe from being battered by recoil.

Action Impact Reducers (6 ea.) K95-20516 $4.95

Dillon’s 1911Action Impact

Reducers

REDDINGReloading Dies & Accessories

REDDINGReloading Dies & Accessories

Trim Pro-2™ Case Trimmer Kit K95-43231 $139.95The RCBS Trim Pro-2 manual case trimmer now features aspring-loaded “universal” shell holder that will accommo-date case head diameters from .250” to .625”. Comes withpilot calibers: .22, .24, .25, .27, .28, .30, .35, .44 and .45.RCBS Scale Check WeightsStandard Set: 60.5 grains for powder charges. K95-12297 $34.95Deluxe Set: 510.5 grains for bullets, cases and powder. K95-12458 $49.95

Acharacteristic of virtually all progressive reloading ma-chines, regardless of brand, is that the dies are set rather

close together. When you are first setting up a “naked” ma-chine, there is plenty of wrench room, but if you have a needto adjust a die afterward, it often requires a delicate touch tomaneuver a lock ring on a crowded toolhead.

Dillon Precision has addressed this in two ways. We nowoffer new 1” die lock rings and a 1” Bench Wrench to fitthem. This combination gives much more room to re-adjustdies after they’re already mounted. The opposite end of ournew wrench is a 7/16” box-end for adjusting the Powder Barof any Dillon Powder Measure. Our new lock rings fit anystandard 7/8” x 14 dies.1” Dillon Die Lock Ring K95-14067 $1.355-Pack of Die Lock Rings K95-10669 4.151” Dillon Bench Wrench K95-10842 7.95

(Buy two or more 1” Bench Wrenches for $7.10 each)Wrench/Lock Ring 5-Pack K95-10668 9.95

Dillon’s New Bench WrenchFits new 1” die lock ringsRCBS EQUIPMENTRCBS EQUIPMENT

Micrometer-Adjustable Competition Seat-ing Dies (These are individual dies.)Competition Pistol Seating Dies9mm K95-10671 $91.95.38 Super Auto K95-10672 91.95.38 Special/.357 Mag. K95-10673 91.95.40 S&W/10mm K95-10674 91.95.44 Special/.44 Mag. K95-10675 91.95.45 ACP K95-10676 91.95.45 Colt/.454 Casull K95-10677 91.95Competition Rifle Seating Dies.45-70 Gov’t K95-11197 $91.95Complete Three-die sets – Size, bell, seat.32 ACP K95-15521 $64.95.32-20 Winchester K95-11906 64.95.38-40 Winchester K95-11838 84.95.38-55 Win./Ballard K95-19106 81.95.44-40 Winchester K95-11692 47.95.45-70 Gov’t K95-12700 64.95Complete Two-Die Sets .204 Ruger K95-12547 $47.95.22 Hornet K95-11484 47.95.220 Swift K95-12182 47.95.22-250 K95-15761 47.95.243 Winchester K95-15762 47.95.243 WSSM K95-11193 47.95.25-06 Remington K95-12183 47.95.25 WSSM K95-11194 50.95.260 Remington K95-09997 47.95.270 Winchester K95-10822 47.95

.270 WSM K95-18337 47.956.5 Grendel K95-19893 93.956.5 x 55mm Swedish K95-11353 47.956.8 SPC K95-12548 64.957 x 57mm Mauser K95-11212 47.957mm WSM K95-18339 64.957mm Rem. SA UM K95-18338 64.957mm Rem. Ultra Mag. K95-18340 64.957mm Rem. Mag. K95-11775 47.957mm-08 Remington K95-12041 47.957.5mm Swiss K95-09995 81.957.62 x 39mm Russian K95-12045 62.95.30-30 Winchester K95-29020 47.95.30-40 Krag K95-11835 77.957.62 x 54mm Russian K95-09994 62.95.300 AAC Blackout K95-12550 84.95.300 WSM K95-15763 47.95.300 Rem. SA UM K95-18341 62.95.300 Rem. Ultra Mag. K95-18342 47.95.300 Weatherby K95-11354 47.95.300 Win. Mag. K95-12046 47.95.303 British K95-11691 64.958 x 57mm Mauser K95-09996 47.95.338 Win. Mag. K95-11774 47.95.338 Lapua Mag. K95-21354 128.95Individual Dies: Neck-Size-Only Dies.223 Remington K95-10164 $36.95.22-250 K95-11184 36.95.243 Winchester K95-10172 36.95.25-06 K95-11336 36.95

.260 Remington K95-09993 37.95

.270 Winchester K95-11806 36.957mm Rem. Mag. K95-11392 36.95.308 Win./7.62 NATO K95-10165 36.95.30-06 K95-11763 36.95.300 Win. Mag. K95-11108 36.95Crimp Dies.32 S&W/H&R Mag. K95-11747 $27.95.45-70 Gov’t K95-11977 35.95Powder Measure, Reloading Accessories Match-Grade Model 3 BR Measure K95-10121 $179.95Large (7.5”) Powder Reservoir K95-10123 $12.95X-Large (10”) Powder Reservoir K95-10124 $13.95Powder Trickler K95-11986 $26.95Stuck Case Removal Kit K95-12186 $23.95Specialty/Custom Die Sets.30 Carbine K95-20625 $103.95(This .30 Carbine die set includes a DillonCarbide size die, a Redding seat die andRedding crimp die.).50 AE K95-14514 $49.95(Incl: RCBS steel size, expander, seat/crimp).500 S&W K95-11114 $49.95(Incl: RCBS steel size, expander, seat/crimp)RCBS Carbide .500 S&W Size Die only K95-19923 $40.95


52

The Tru-Weight Trigger Ten-sion Scale has a range fromeight ounces to eight pounds.A unique weight indicatorremains at the exact point oftrigger release, making it eas-ier to read your trigger pullpressure.

K95-14838 $26.95

This customdesigned 12” x

9” x 1-1/2” case ismade from durablesoft Nukaf and con-tains a 17-piece setof Grace USA GunCare Screwdrivers(8 ea.), Solid BrassPin Punches (8 ea.)and a specially fab-ricated 8 Oz. BrassHammer. Thescrewdrivers arehand-assembledand custom hollowground to fit scopescrews, plug screws, guard screws, etc. The handles areturned from quality Maine hardwood and protected witha smooth finish. Made in USA.

Grace USA Gun Care Tool Set K95-10680 $99.95

Ball-end set K95-13286 $12.95Gorilla Grip Sm. K95-16822 5.45Gorilla Grip Lg. K95-16823 6.35Gorilla Grip Set K95-22142 10.75

Bondhus Hex Key Sets

Grace USAGun Care Tool Set

grace USA gunsmith Hammerand Punch Sets8 oz. Brass Hammer

K95-14969 $14.9516 oz. Brass Hammer

K95-15069 $17.95Brass Punches (8-Pc.)

K95-14968 $31.95Steel Punches (7-Pc.)

K95-15070 $31.958 oz. Brass Hammer and 8-pc.Brass Punch Set

K95-21655 $39.95

The B-Square 32 Piece gun-smith Screwdriver Kit con-tains 11 slotted bitsdesigned to eliminate screwhead damage, 8 hex bits, 3Phillips bits, 2 Posi-Drivebits, 2 Torx bits, 3 extra-longbits (1 each: Phillips, slotted,hex), and a 1/4” socket driveadapter. Get one for yourworkbench AND your rangebag! K95-18410 $29.95

Doc Allen’s Versatool fits eas-ily in your pocket and func-

tions as either a screwdriver or awrench. The Versatool includes11 tool bits and an extensionshaft with the loop handle. Theloop slides to three differentpositions to provide varyingdegrees of leverage to suit theneeds of the job at hand.

K95-15757 $12.95

DOC ALLEN’S VERSATOOL

53


Apex Tactical Specialties Armorer’s Block

Apex Tactical Specialties’ Armorers Block is designedfor S&W Semi Auto M&P Pistols in all calibers, sizes

and configurations, including thumb-safety models andthe M&P Shield; also for GLOCK® semiauto pistols in allsizes and calibers. The Armorer’s Block supports a pistolfor armory work and detail disassembly. Its pre-positionedbosses, slots and holes remove pressure from criticalfunction surfaces while pins are driven in and out. High-density polymer construction prevents marring of theframe while driving pins in and out. Made in USA.

Armorer’s Block K95-19536 $29.95

More Great Tools From Grace USA!

Grace USA’s 9-Piece Ball-End Allen HeadScrewdriver Set includes the following sizes:1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”,5/32”, 3/16”, and 3.5 mm. Each is con-structed of US 8650 Chromium-Vanadiumsteel alloy and is proudly Made in USA!Ball-End Allen Set K95-15063 $49.95

Grace USA’s 7-Piece Steel Roll Pin PunchSet includes the following sizes: 1/16”,5/64”, 3/32”, 1/8”, 5/32”, 3/16”, and 7/32”.Each is proudly Made in USA!Roll Pin Punch Set K95-15065 $39.95

About Grace USA: Grace USA gun careproducts are made with precision, and de-

signed specifically for gun enthusiasts who care about keeping their firearms in

prime condition. We are proud of our prod-ucts and look forward to providing you

with durable tools that fit your needs andguarantee satisfaction.

D•WIPE Towels ESCA TECH, INC.

D•LEAD Hand Soap ESCA TECH, INC.

Original D•LEADHand Soap

quickly cleans heavymetals as well aspaint dust and firingrange residue fromthe skin and finger-nails. Removes lead,nickel, cadmium, ar-senic, mercury, silver,zinc and most otherheavy metals.

8 Oz. Bottle K95-19915 $2.95

D•WIPE Towelswere specially

designed for immedi-ate clean up of mostcontaminants withoutwater. The soft 5.5”x8” towels are satu-rated with a uniquecleansing formulaand aloe vera, andwill remove heavymetals from skin andother surfaces. 40 Soft Towels K95-19916 $4.95

HARTMAN MFGTarget Stands

HARTMAN MFGTarget Stands

Rugged!Portable!

Easy-to-Use!Pistol Targets: 100 per packageNRA Paper D-1 “Tombstone” Target 23”x35” K95-18388 $39.95IDPA Paper Practice Target 22”x34” K95-15735 39.95USPSA/IPSC Paper Practice Target 22”x35” K95-15836 39.9550 Foot TIMED/RAPID FIRE 10.5”x12” K95-15832 7.95Competition 50 Foot SLOW FIRE 10.5”x12” K95-15831 7.95Competition 25 Yard SLOW FIRE 10.5”x12” K95-13096 8.50Police (Silhouette) 25 Yard 14”x24” K95-13163 12.50Police (Silhouette) 25 Yard 22.5”x35” K95-10094 27.50Competition 25 Yard RAPID FIRE 21”x24” K95-12839 17.50Competition 50 Yard SLOW FIRE 21”x24” K95-10041 17.50Police (Silhouette) 50 Yard 22.5”x35” K95-10670 27.50Rifle Targets: 100 per packageSmall Bore Rifle 100 Yard 14”x14” K95-12430 $7.50High Power 200 Yd. 21”x24” (600 Yd. reduced)K95-12650 34.50Replacement Center 100 per packagePistol 25 Yard B8P Repair Center 10.5”x10.5” K95-12676 $4.95200 Yard Rifle Repair Center 12.75”x12.75” K95-15830 13.45Target PastersBlack, Self-Adhesive, 500 ea. K95-16304 $3.00Buff, Self-Adhesive, 500 ea. K95-16309 3.00Brown, Self-Adhesive, 500 ea. K95-16310 3.00White, Self-Adhesive, 500 ea. K95-16313 3.00Orange, Self-Adhesive, 500 ea. K95-16327 3.00

NRA P

istol and R

ifle Ta

rgets

One Target Stand K95-18237 $44.95A Pair of Stands K95-74493 79.95One Hostage Target Adapter (Shownabove in contrasting color for clarity.Works only with Hartman target stands.) K95-11697 22.95A Pair of Target Spikes (Inset) K95-11393 22.95

gunslinger Spring KitsFrom Lee Fisher, one of the premier

“cowboy gunsmiths.” Colt & clones K95-20510 $26.95Ruger Blackhawk/Vaquero K95-20511 $24.95Marlin 94 K95-20512 $18.95Rossi/Navy Arms 92 lever guns K95-20513 $24.95Stoeger IGA shotgun K95-20514 $14.95

Peacemaker Specialists’ These wooden-handled screwdrivers

were designed to fit most SAA screws.SAA 2-Driver Set K95-15486 $19.95


54

• Weighted to simulate a fully loaded mag• 1911 practice mag works for all calibers• Mags for GLOCKs work in 9mm/.40 cal.• If necessary, fitting is easily done withany file

1911/Clones K95-16866 $14.95GLOCK 17, 22 K95-16872 14.95

Bennie Cooley’sSafety Magazines

Take out your frustrations, and buildyour grip strength at the same time!

Just think about…oh, socialized medi-cine, tax increases, high-capacity mag-azine bans, etc.

1 lb. K95-15532 $7.992 lb. K95-15533 $14.95

Note: These Come in Assorted Colors

Freedom Standalone LLC is proud to offerthe first and only true full-size torso tar-

get on a standalone base. Simply slide thetorso into the base wedges for a sturdy anddurable fit; then move dirt, sand, etc., ontothe base to hold in place even in the wind.There’s no more need for heavy, cumber-some target stands. With our 100% recycledtargets and bases, sport shooting is simplerthan ever.Freedom Targets 5-Pk K95-12099 $29.95

TACCOM’s Enhanced Firing Pin forCiener/CMMG .22 Long Rifle AR-

15 caliber conversions is a direct-replacement firing pin, made from 17-4 SS heat treated to a condition H900,to present a tough, hard firing pin thatwon’t break or mushroom out aftermany firings. The tip has beendesigned to stick out of the hole only.030”, so you will not damage yourbarrel by dry firing your weapon.

K95-19538 $13.95


7.5” x 14” x 10”K95-14239 $14.95

itsabox!

You can become a master at usinga Mil Dot reticle with this ballistic

slide rule! Comes with a 24-pageinstruction manual.Mildot Master® K95-14762 $29.95

All Schuster Mfg. Inc. adjustablegas plugs are made in the U.S.A.

from hardened tool steel, Parkerizedand feature a lifetime factory warranty.By adjusting the volume of gas, youchange the speed of the op rod andthe barrel harmonics. If you’re work-ing up your own handloads, a quarterof a turn WILL affect your group size.Includes instructions and the adjust-ment tool (Allen wrench). M1A (Pictured) K95-15405 $45.00SOCOM M1A K95-15409 50.00M1 Garand K95-15408 32.00

MILDOT MASTER Schuster Mfg. Inc.Adjustable M1/M1A Gas Systems

Does your .22 Long Rifle insertmove back and forth in your AR

upper? The TACCOM Pressure Plugwill apply a constant pressure onyour insert, always keeping it in themost forward position when the rifleis in battery. You can install andremove the pressure plug in secondswith no tools.

K95-19533 $7.95

The TACCOM Extreme Extractor isa drop-in part for your

Ciener/CMMG .22 Long Rifle insertthat will give you consistant extrac-tion, which is KEY for a reliablefirearm. This will help with your live-round extraction, depending on howwell the factory has cut the chamber,and the type of chamber cut.

K95-19539 $10.95

Barrel-Lite®K95-10529$4.95

55

NEW!NEW!

15.5” x 26.5” Dillon CalendarK95-09992 $12.95

TUFFQuickStrips

$850(Pkg. of 2)

TUFF QuickStrips are available for an incredible variety ofrevolver calibers from .17 HM2 to .500 Linebaugh!

.22 LR-Magnum/.17HM2-HMR (10 rd.) K95-11737

.32/.327/9mm (8 rd.) K95-11738

.38/.357/.40/10mm (5 rd.) K95-11740

.38/.357/.40/10mm (6 rd.) K95-11741

.38/.357/.40/10mm (8 rd.) K95-11742

.41Mag./.45 ACP (6 rd.) K95-11748

.44 Sp.-Mag./.45 Colt/.460 S&W/.410 Shotshell (6 rd.) K95-11750

.45 Auto Rim (6 rd.) K95-11751

.475/.480/.500 S&W (5 rd.) K95-11755

Hogue Competition S&W Revolver Thumb Latch

fits K, L, and N-FramesStainless K95-19921 $59.95

56

(Hammer/Trigger Return Springs)Ruger GP-100 K95-11367 $10.50SP-101 K95-12598 9.50S&W J Frame K95-12189 9.00(Mainspring/Rebound Springs)S&W K,L,N (standard) K95-15073 $15.00S&W K,L,N (reduced power) K95-15072 15.00

W.C. Wolff Co. Revolver Springs

Pin-In Front Sight – $28.00 .250” high, red K95-18379.250” high, green K95-18380.300” high, red K95-18381.300” high, green K95-18382Pin-In Front Sight – $44.95.250” high, Gold Bead K95-18565.300” high, Gold Bead K95-18566

“Classic” Slip-In Sight – $35.00.250” high, red K95-18375.250” high, green K95-18376.300” high, red K95-18377.300” high, green K95-18378“Classic” Slip-In Sight – $44.95.250” high, Gold Bead K95-18567.300” high, Gold Bead K95-18568

Jerry MiculekCompetition

Grips$79.95

Hogue“BigButt”Grips$59.95

S&W N-Fr. Rd. Butt K95-11324N-Fr. Sq. Butt K95-11325K, L-Fr. Rd. Butt K95-11327K, L-Fr. Sq. Butt K95-11326

S&W N-Fr. Rd. Butt K95-12141 K, L-Fr. Rd. Butt K95-12140

SDMS&W RevolverFront Sights

B.

D.E.F.G.

A.

Tools from L. Bengtson Arms Co. for Smith & Wesson Revolvers

A. Rebound Spring Tool K95-30000 $22.00B. Ejector Rod Tool K95-25343 45.00

B.

California Competition Works’ Moon Clip Loading/Unloading Tools & Carriers

A. Demooner Tool K95-18169 $16.95B. MoonLoad/Unload 8-Shot .357 K95-19490 39.95C. MoonLoad/Unload 6-Shot .45 K95-19489 39.95(Will work with #16510 8-shot EDM .38/.357 moon clips on Pg. 57) D. 6-Shot Moon Clip Holder (2 ea.) K95-18173 17.90

E. Blued .45 ACP Moon Clips (10 ea.) K95-18183 9.80Not Pictured, Generic Stainless Steel .45 ACP Moon Clips (10 ea.) K95-18280 10.50F. 10mm Moon Clips (10 ea.) K95-18184 11.20G. 8-Shot .357 Moon Clips (10 ea.) K95-19228 19.95

North MountainSpeed Loader HolderThe North Mountain IDPA-Compliant Speed LoaderHolder is made specifi-cally for the competitiveIDPA revolver shooter.Lightweight at 2.9 Oz., itfirmly holds your competi-tion speed loader. It is fit-ted with a Tek-Lok™ tomount to your range belt.It fits Comp III and similar-sized speed loaders.

“K-Frame” ModelK95-21900 $35.00

“L-Frame” ModelK95-21914 $35.00

A.

C.

002 “Cup Challenge” $69.956” S&W K,L,N; Std. bbl. K95-17788 333 “Speedloader Holder” $34.95S&W K-Frame K95-12411 S&W L-Frame K95-13087 “Competition Speedloaders” $19.95S&W K-Frame K95-13224 S&W L-Frame K95-13117Revolver “Speedloaders” $11.95 S&W J-Frame (5-Shot) K95-12405S&W K-Frame K95-13104S&W L-Frame K95-13074“Speedloader” Holders $9.95 Sm./Med. Fr. K95-10340“Speedloader Loading Blocks” $24.95 S&W K-Frame K95-12262S&W L-Frame K95-12878

Safariland Competition Gear for Revolver Enthusiasts

I’ve tried several methods of holding my moon clips, and thisworks best for me! My hand only has to go to one place, so I no

longer grope around frantically for my reloads. – Mark PixlerFor 610/625, 7-Shot 686, 8-Shot 627 K95-21883 $130.00

Johnson Precision’s Mag Rack™ moon clip retention systemholds eight of your moon clips in place with strong magnets. The

Mag Rack may be permanently attached to a belt with includedfasteners, or temporarily with the optional belt loops.Mag Rack, 8-Shot 627 K95-25367 $149.95Mag Rack, 7-Shot 686 and 6-Shot 625 K95-25368 149.95Accessory Belt Loops K95-25369 9.95

North MountainMoon Clip Holder

Johnson Precision Mag Rack Moon Clip Retention Systems

California Competition Works.22 LR Speedloader .22 LR Speedloader

California Competition Works’ 10-Round Speedloader for S&WModel 617 .22 LR Revolvers is ideal for Steel Challenge or

Ruger Rimfire Series competition. The speedloaders are machinedfrom 6061 T6 aluminum, then black anodized. The Loading Block(inset photo) is CNC machined from polymer and holds 120 roundsof .22 LR ready for insertion into speedloaders.CCW Model 617 Speedloader K95-12623 $34.95CCW .22 LR Loading Block/Case K95-12627 49.95

These .025 EDM

Stainless Moon

Clips are designed

to fit Remington

brass SNUGLY,

eliminating nasty

“cartridge flop”

when you reload.

Stainless EDM 8-Shot Moon ClipsStainless EDM 8-Shot Moon Clips

$5995

K95-16510Sold in Packages of 10

for 8-Shot S&W 627 Revolvers

57


Engages the slide lock and provides amechanical advantage making

slide removal easierand faster. Forthose with largefingers, smallfingers, tiredfingers, anyonelooking for a wayto simplify the removalof your GLOCK slide.K95-19527 $11.95

Lone Wolf Distributors’ Match-Grade Barrels for GLOCK Pistols

These replacement barrels are manufactured from the highestgrade mill-select 416 stainless forgings. Standard land-and-

groove rifling makes these an excellent choice if you wish to shootlead, plated or jacketed bullets. Can be used in factory ported orstock pistols. Ready to use, pre-fit drop in. No gunsmithing required. GLOCK 17 9mm Barrel K95-19167 $99.95GLOCK 19 9mm Barrel K95-19326 99.95GLOCK 20 10mm Barrel K95-19241 99.95GLOCK 20 .40 S&W Conversion Barrel K95-19805 99.95GLOCK 20 .357 SIG Conversion Barrel K95-19806 99.95

GLOCK 20 9x25 Dillon Conversion Barrel K95-19807 114.95GLOCK 21 .45 ACP Barrel K95-19242 99.95GLOCK 22 .40 S&W Barrel K95-11526 99.95GLOCK 22 9mm Conversion Barrel K95-11527 99.95GLOCK 22 .357 SIG Conversion Barrel K95-19808 99.95GLOCK 23 .40 S&W Barrel K95-19327 99.95GLOCK 23 9mm Conversion Barrel K95-19328 99.95GLOCK 34 9mm Barrel K95-19330 99.95GLOCK 35 .40 S&W Barrel K95-19329 99.95GLOCK 35 9mm Conversion Barrel K95-19331 99.95

A. B. C.

E. F. G.

GLOCK® Factory Original Parts:A. Extended Mag Release (Small Frame) K95-18569 $9.95B. Extended Slide Release K95-18570 19.95C. Striker Cups (The ones you always lose.) K95-19325 4.95D. Striker Channel Liner K95-18881 9.95

Lone Wolf Parts for GLOCK firearms:E. Extended Mag Release (Large Frame) K95-19115 4.99F. Extended Take-Down Lever K95-19114 9.95G. 3.5# Trigger Stop Connector K95-16501 14.95Extended Slide Stop K95-22299 15.99

Wolff Spring Co. Parts for GLOCK firearms: Competition Spring Set K95-11524 $9.95Trigger Return Spring 3-Pack K95-11818 7.99X-Tra Power Trigger Rtn. Spr. 3-Pk. K95-15558 7.99Guide Rod, GLOCK 17, 22, 31 K95-11356 24.95Guide Rod, GLOCK 19, 23 K95-11435 24.95Guide Rod, GLOCK 20, 21 K95-11352 24.95Recoil Spring, 12# K95-11420 7.99Recoil Spring, 14# K95-11418 7.99Recoil Spring, 15# K95-11419 7.99

Performance Parts for Your GLOCK® Firearm

D.

58

The 10-8 Performance Armorer Tool is a simple, non-marringtool useful for applications where prying or poking with metal

tools can easily damage your work. The rigid chisel-pointed endand semi-flexible flat blade end each have unique uses.

K95-15434 $7.95

10-8 Performance Armorer ToolSlide Removal ToolFits All GLOCK ModelsSTUL

Jentra Competition Guide Rod Kit

The Jentra Competition Guide Rod Kit for GLOCK Gen4 G-17/G-34 type slides features the largest diameter hardened

stainless steel guide rod for less muzzle rise. It has a non-captured

spring for faster and easier spring changes, and comes with a pre-mium quality Wolff (15 lb.) recoil spring.

K95-17106 $31.95

Grip extensions do not alter mag. capacity.GLOCK 26/27 K95-10346G29 (10 rd.)/30 (9 rd. opt. mag.) K95-10355G30 (10 rd. mag. only) K95-10356Kel-Tec P11/Taurus PT111 K95-18586Springfield XD (9mm/.40 only) K95-18587Springfield XD-S K95-15286 Mag. extensions add additional capacity.GLOCK 10mm/.45 ACP (+2) K95-18589GLOCK 9/.357/.40 (+2 or 1) K95-18588G27/33 (+1) K95-18590

Installs in a snap and protects your GLOCK’sinternal parts from dust, dirt, rain, snow and lint.GLOCK Models 17, 19, 20, 21, 22, 23 (fit mayvary) K95-18161Model 21SF K95-19925Models 26, 27, 33 K95-10235Model 30 K95-106484th Generation GLOCKs K95-17087

PEARCEGRIP, INC.

$995

$795

THEPLUG

Cleaning your GLOCK magazines hasnever been easier! GTUL has devel-

oped an integrated system to disassembleand clean all GLOCK magazines withoutmarring, gouging, or damaging the metalliner. Quickly removes dirt, dust, powderresidue and grime! Standard Mags K95-20910 $21.95Large Mags K95-20911 21.95

GTUL

Arredondo’s extended magazine basepad adds capacity to your magazines!

The Arredondo base pad comes with a newspring and an installation tool that also actsas a floorplate removal tool you’ll need todisassemble and clean your mags.Small-Frame GLOCK K95-19125 $39.95Large-Frame GLOCK (not for 29/30) K95-19124 39.95Base Pad & Spring Kit for Springfield xDsXDM K95-15569 $23.00.45 XD (+3) K95-15570 23.00Base Pad Kit with Spring for S&W M&P9mm/.40 M&P K95-19104 $23.00

TRUGLO’s Tritium/Fiber Optic T.F.0.BRITE•SITE Handgun Sights use a combi-

nation of Tritium and Fiber Optic technologies. Small-Frame GLOCK K95-18654Large-Frame GLOCK K95-18655Most Kimber Models K95-18656Springfield XD K95-11602Smith & Wesson M&P K95-18627

TRUGLO’s Fiber Optic BRITE•SITE Hand-gun Sights use traditional Fiber Optic

technology. Small-Frame GLOCK K95-18657Large-Frame GLOCK K95-18658Most Kimber Models K95-18659Springfield XD K95-11603Smith & Wesson M&P K95-18628

$9995

$4995

TRUGLO


GLOCK® MagsJust What’s Listed, While They Last!

G-17 K95-11363 $39.95G-19 K95-15806 39.95G-21 K95-15807 39.95G-22 K95-11958 39.95G-23 K95-11960 39.95

TARAN TACTICALINNOVATIONS

59

Sight Set, GLOCK® K95-15381 $84.99

Henning BATTLEHOOK

GLOCK 17, 19, 22, 23, 24, 26, 27, 33 K95-12031GLOCK 20, 21, 29, 30, 31, 32, 36 K95-12032

$94.95w/Fiber Optic Front Sight

For GLOCK 17, 19, 22, 23K95-12523 $46.00

For GLOCK 20, 21K95-12525 $46.00

California CompetitionWorks Enlarged

Magwells for GLOCK® Pistols

60

Streamlight’s Nano Light® LEDflashlight is super bright (10

lumens), can be seen a mile away, ismade of virtually indestructiblemachined aluminum with ananodized finish, is weatherproof,nearly weightless and fits on yourkeychain or zipper pull tab!

K95-19942 $11.95

StreamlightStylus PROPenlight

Stylus Pro K95-18876 $29.95

Hogue Rubber AR/AK Pistol Grips (A.) AR-15s K95-14537 $34.95AKs K95-14538 34.95Hogue Rubber OverMolded® AK-47/74 Handguard Kits (K.) Standard Russian/Chinese Rifles K95-14556 $49.95Yugo-Version Rifles w/Longer Guard K95-14558 49.95Hogue eXtReMe seRies G-10 1911 Grips (B.) For guns w/S&A-style magwells K95-14562 $59.95Hogue Rubber Pistol Grips

(C.) Beretta 92 (Finger Grooves) K95-16660 $17.95(D.) Colt GM (Finger Grooves) K95-12803 17.95Ruger Mark II, RH K95-16664 17.95Hogue square Butt Monogrips Colt Python K95-12138 $17.95(E.) K, L-Frame Square Butt K95-12786 17.95N-Frame Square Butt K95-12145 17.95N-Frame Round Butt K95-18100 17.95Hogue Round Butt MonogripsRuger SP-101 K95-14833 $17.95S&W J-Frame Round Butt K95-12277 17.95K, L-Frame Round Butt K95-12549 17.95the Hogue HANDALL™ Grip sleeve fits many semi-autos.(F.) HandAll K95-14463 $8.95the Hogue HANDALL™ Hybrid Grip sleeve(G.) Ruger LCP .380 Auto K95-14477 $9.95(H.) Springfield XD 9mm/.40 K95-14478 9.95(I.) Smith & Wesson M&P 9mm/.40 K95-14479 9.95Hogue Bantam Boot Grips (J.) S&W J-Frame Round Butt K95-11054 $17.95K, L-Frame Round Butt K95-11055 17.95Hogue Hex Head 1911 Grip screws (Four-screw set).Blue K95-15723 $8.99Stainless K95-15722 8.99

A. B.

K.

C. D. E.

F. G. H. I. J.

Get a Grip With HogueGet a Grip With Hogue

The Larry™

8 LEDPocket

Work LightThe Larry™ 8 LED

Pocket Work Light isthe essential handymanlight. 8 powerful LEDsprovide 60 lumens ofbright white light. Therotating magnetic clipgives you convenienthands-free lighting. Thereinforced plastic bodydesign is shock-proofand water-resistant,making the Larry™ basi-cally indestructible. K95-15432 $9.99

A. S&W M&P Pistol Sear M&P 9/40 K95-21889 $41.95M&P 45 K95-21892 41.95B. S&W M&P Competition Spring Kit M&P 9/40 K95-21891 25.95C. S&W M&P Ultimate Striker Block Kit M&P 9/40 K95-21890 35.95D. S&W J-Frame Spring Kit K95-14309 25.95E. S&W Revolver Firing Pin K95-21888 15.95

Apex Tactical Specialties Parts for Smith & WessonsApex Tactical Specialties Parts for Smith & Wessons

D. Duty/Carry Spring Kit for S&W J-Frame Revolvers(w/frame-mounted firing pin)

E. S&W Revolver Frame-Mounted Firing Pin

A. S&W M&P Pistol Sear

A.

B. S&W M&P Competition Spring Kit C. S&W M&P Ultimate Striker Block Kit

PP oo ww dd ee rr RR ii vv ee rr PP rr ee cc ii ss ii oo nn ,, II nn cc ::PP ee rr ff ee cc tt ii nn gg YYoo uu rr XX DD // XX DD mm

Powder River Precision x-Treme grips: CNC Laser Cut360º grip Enhancement for your xD/xDm, made ofhigh-quality adhesive-backed traction tape.X-Treme Grips, XDm 45 (Sand) K95-15229 $16.95X-Treme Grips, XDm 9/40 (Sand) K95-15230 16.95X-Treme Grips, XD 45 (Sand) K95-15231 14.95X-Treme Grips, XD 9/40 (Sand) K95-15232 14.95Powder River Precision’s Drop-In Trigger Kits for Spring-field xD Pistols will give you a short, crisp trigger pullwith a fast reset and shorten the total trigger pull length.

XDm 9/40 Drop-In Trigger Kit K95-15226 $125.00XDm 45 Drop-In Trigger Kit K95-15236 125.00XD 9/40 Drop-In Trigger Kit K95-15228 125.00XD 45 Drop-In Trigger Kit K95-15227 125.00XD-S Trigger Spring Kit K95-15237 $14.95Powder River Precision’s Ergonomic Punch Set for thexD/xDm made of hardened 416 stainless steel withhard-molded rubber handles designed to fit comfortablyin the palm of your hand. XD/XDm Punch Set K95-15233 $30.00

TARAN TACTICAL INNOVATIONS

F.

C.

D. E.

B.

G.

A. Baseplate/Spring Kit, GLOCK® K95-15375 $39.99B. 11-Coil Spring, STI/SVI Mags. K95-15379 8.95C. Baseplate/Spring Kit, S&W M&P K95-15380 39.95D. Follower, STI Mags. K95-15377 9.95

E. Follower, SVI Mags. K95-15378 $9.95F. Short Baseplate, GLOCK® K95-15376 29.99G. 4mm Baseplate, STI/SVI Mags. K95-15382 32.95


61

62

By Duane ThomasHi-Point’s Model JHP is a large, blowback-

operated, striker-fired autopistol chambered in .45ACP. The slide is an aluminum/zinc casting, theframe is polymer. The gun is rated for +P ammo.

The trigger is a smooth-faced plastic unit. For asingle-action gun, the trigger stroke is quite long,almost like a short double action, though amaz-ingly smooth. The trigger broke at an even fivepounds according to my NRA weight set.

Grip panels, surprisingly, are separate units,held in place with large Phillips-head screws. Theoverall handle is shockingly comfortable. Maga-zines are single stack, blued steel, hold ninerounds, and have absolutely huge baseplates. Oneof the few nits I can pick with this gun is that, ofthe two sample mags supplied with the article testgun, only one would fall free when I pressed themag button with the slide locked to the rear.

Speaking of which, the slide does lock back

when you shoot the gun dry. There is, however, noexternal slide lock, so getting the slide back intobattery after reloading entails pulling it to the rear,then releasing to go forward.

As the name indicates, the Model JHP isintended to feed hollowpoints. Thus I repaired tothe range with an assortment of ammunitionincluding Black Hills “blue box” hardball, Win-chester 185-gr. Silvertips, and from Hornady theirstandard pressure XTP and TAP-CQ +P hollow-points, both 200-grainers.

Reliability-wise the Model JHP was flawlesswith hardball and the Silvertips which feature arounded, hardball-like ogive. The gun did not likeeither of the two loads featuring a truncated conebullet shape. When I say, “didn’t like,” I mean therounds wouldn’t even come out of the magazine. Ifired three rounds of XTPs and had one failure tofeed. I fired two rounds of TAP-CQ +P and hadtwo failures to feed. Returning to hardball and Sil-

Hi-Point’s Surprisingly Impressive Model JHP .45 AutoThe Hi-Point Model JHP is alarge, single action, striker-fired autopistol chambered for.45 ACP. The Model JHP getsaround the need for a heavy recoil spring, common in blow-back autopistols chambered forservice cartridges, by having a

large and heavy slide.

The JHP’s safety lever has three functions. Up is Safe. Down is Fire. When the slide is pulled to the rear and the lever manually pushed up into the

hold-open notch, it can be used to lock the action open.

63

DP

vertips restored 100 percent function. It’s worthnoting that several multi-thousand-dollar 1911s ofmy experience wouldn’t feed truncated coneshaped bullets either, so you can hardly fault theModel JHP in that regard.

Blowback autos, on which the barrel does notmove during cycling, being instead immovablyfixed to the frame, can be quite accurate, and suchwas the case here. Best group from the Black Hillsball was 1.6” with three of the five bullets goinginto one hole, however that group impacted 3-1/2” high with the adjustable rear sight totally bot-tomed out. The Winchester Silvertips posted aquite satisfying 0.9” group, only 1-1/2” high.

The Model JHP has a fully adjustable rear sight,click adjustable for windage and elevation. Therear sight is highlighted with two red dots, thefront sight with a yellow bar. I didn’t find that yel-low front sight the most visible thing on Earth,frankly. In the near future, those “highlighted”

sights will be having an appointment with a blackSharpie. With more visible sights I don’t doubt Icould shrink the Model JHP’s not-exactly-hugegroups considerably.

I placed a USPSA target at five yards and fired afull gunload, 10 rounds of factory .45 hardball, ina series of five double taps. Every round struckwell within the A-zone, with shot-to-shot speedsbetween .22 and .25 second.

I would trust this gun with hardball or a hol-lowpoint featuring a rounded, feed-reliability-enhancing bullet profile. The Hi-Point Model JHPwas more accurate that many guns I have testedover the decades costing far more. Trigger pullswere smooth, the grip comfortable, the gun’sshooting qualities excellent. This proved to be asurprisingly impressive handgun. For somethingfull retailing at under $200, it was kind of amaz-ing, actually.Duane’s website: www.Self-Defense-Handguns.com.

Hi-Point’s Surprisingly Impressive Model JHP .45 Auto

As the model designation indicates, this gun is intended to feed hollowpoints – and in Thomas’ testing did, as long as the hollowpoint featured a

rounded ogive.

Winchester 185-gr. Silvertips put five rounds into lessthan an inch. POI was 1-1/2” above POA.

The trigger is plastic. Trigger pulls were quite smooth, ifa bit long. The trigger broke at five pounds even.

The ejection port on the Model JHP is huge. The extractor is spring-loaded.

Black Hills “blue box” hardball reloads put five roundsinto this respectable group at 50 feet from the bench,but POI was 3-1/2” above POA with the adjustable rear

sight bottomed out.


64

Try a few of Dillon’s heavy-duty, lightweight plastic ammo boxes. If you’re like us, you’re tired of crumbling

styrofoam and cardboard boxes held together with layersof tape. These boxes are perfect for range or field use.

Designed to keep out dirt, dust and rain.

Dillon Utility BoxesDillon’s Utility boxes are ideal for all those accessories that

don’t quite fit into the compartments of your shooting bag. The large box measures 13-1/2" x 5-3/4" x 2-1/4" and the smallbox measures 4-5/8" x 6-3/8" x 1-5/8". Use them for cleaning gear,extra magazines, repair parts, first aid supplies, reloading acces-sories and tools – the list is endless. Description Stock # Each 5 ea. Small Utility Box K95-13636 $2.65 $10.95 Large Utility Box K95-17195 5.75 23.95

Dillon AkroBinsAkroBins are perfect for reloaders who load several calibers, bul-

let weights, bullet shapes, etc. We’ve been including these binswith our machines for years, and now we’re stocking them in quan-tity for our customers. • The small bins (the ones we use as Square Deal “B” cartridge

bins) are 4-3/4" long x 3-7/16" wide x 2-13/16" deep. • The RL 550B/XL650 cartridge bins are 6-3/4" long x 3-7/16"

wide x 2-13/16" deep.• The 1050 bins are 10-1/4" long x 4-3/8" wide x 4-3/4" deep. • The double-extra-large bins we use on our SL 900 measure 13-

3/4" long x 6-1/2" wide x 6-3/4" deep (all inside dimensions).AkroBins are made of heavy-duty polypropylene with perma-

nent, molded-in color (ours are blue). They’re virtually unbreak-able; unaffected by weak acids and alkalis, and are also water, rustand corrosion proof. Hang ’em, stack ’em, rack ’em and fill ’em –you just can’t beat ’em! Buy several and get your “stuff” together.Description Stock # Each 6 ea. 12 ea.“Square Deal” Bin K95-13756 $2.95 $15.30 $24.84“RL 550/XL 650” Bin K95-13839 2.95 15.30 24.84“RL 1050” Bin K95-13484 6.95 34.92 61.92“SL 900” Bin K95-17125 10.50 56.94 106.92

Dillon Ammunition BoxesDescription Stock # Each 10 ea. Case(qty.) 9mm (50 rd) K95-13784 $1.58 $13.50 $58.00(50)9mm (100 rd) K95-13645 1.81 15.40 66.00(50).38/.357 (50 rd) K95-13476 1.79 14.70 63.00(50).38/.357 (100 rd) K95-13766 2.20 18.80 80.50(50).44 (50 rd) K95-13568 1.79 15.30 65.50(50).44 (100 rd) K95-13680 2.92 24.90 106.50(50).45 ACP (50 rd) K95-13715 1.73 14.70 63.00(50).45 ACP (100 rd) K95-13574 2.83 24.20 103.50(50)Small Rifle (50 rd) K95-13740 2.05 17.50 75.00(50)Medium Rifle (20 rd) K95-13625 2.05 17.50 120.00(80)Medium Rifle (50 rd) K95-13665 2.90 24.70 106.00(50)Large Rifle (20 rd) K95-13647 2.01 17.20 73.50(50)Large Rifle (50 rd) K95-13231 3.20 27.30 117.00(50)NOTE: “.38” series cases fit .38 Super, .32-20, .30 Carbine and .30 Mauser; “9mm” se-ries cases fit .30 Luger, 9 x 21 and .380; “.44” series cases fit .41 Mag, .44-40 and .45Colt; and “.45” series cases fit 10 mm and .40 S&W. “Small rifle” cases fit .222, .223 to7.62 x 39 length; 20 round “medium rifle” cases fit 7.62 x 39, .22-250 to .30-06length; 50 round “medium rifle” cases fit .22-250, .308 to .30-30 length; and “largerifle” cases fit .30-06, 8 x 57 length to all belted cartridges.Extra Loading Data Labels, K95-10446, Package of 100, $6.95

Get your “stuff” together, then keep it that way!

Berry’s Manufacturing Ammo/Storage BoxesDescription Stock # Each 10 ea. 50 ea..500 S&W (50 rd) K95-19243 $2.98 $22.40 $97.00Note: .500 S&W Ammo Boxes also fit .223/.243/.308 WSSM Cartridges

.454 Casull (50 rd) K95-19244 2.98 22.40 97.00

.45/70 (50 rd) K95-19245 3.29 24.20 105.007.62 x 54R (50 rd) K95-19247 3.50 25.50 110.50.300 Ultra (50 rd) K95-19246 3.50 25.50 110.5020 Ga. (25 rd) K95-19248 2.24 16.80 72.5012 Ga. (25 rd) K95-19249 2.24 16.80 72.50Storage Boxes4-3/8”x 2”x 1-5/8” K95-19250 $1.12 $8.40 $36.504-1/2”x 4-1/2”x 1-5/8” K95-19251 2.32 17.40 75.505-1/2”x 2-5/8”x 2-1/2” K95-19252 2.22 16.70 72.00

The Kershaw Nerve has 3-D machined G-10 scalesthat provide a great grip without roughing up your

pocket. Jimping on the back of the handle and in theindex-finger contour further enhances grip. It’s made of8CR13MoV stainless steel with CNC-machined G-10scales, a liner lock, and a 3-1/8” blade.

K95-15391 $19.95

HubbardProduct

DevelopmentFirearmsLubricantK95-15445$7.99

Once-FiredCartridge CasesNote: Availability Varies, Please Call First

9mm cases 1000/box K95-21694 $69.95.40 S&W cases 1000/box K95-19204 69.95.45 ACP cases 1000/box K95-30196 79.95.223 cases 1000/box K95-10485 89.95

Chiappa Rhino 9mm/.40 S&W (10 Pk) K95-12040 $65.00Chiappa Rhino .38/.357 (10 Pk) K95-12043 65.00N-Frame 9/.38 ACP 8-Shot (Blue) (10 Pk) K95-12044 39.95L-Frame 9/.38 ACP/.40 6-Shot (Blue) (10) K95-12057 39.95S&W N-Frame .45 ACP 6-Shot (10 Pk) K95-12058 19.95S&W N-Frame .45 ACP EDM 6-Shot (10) K95-12059 74.95S&W L-Frame .38/.357 7-Shot (10 Pk) K95-12065 64.95S&W L-Frame .38/.357 6-Shot (10 Pk) K95-12066 64.95S&W J-Frame .38/.357 5-Shot (5 Pk) K95-12088 32.50S&W K-Frame .38/.357 6-Shot (10 Pk) K95-12090 64.95S&W N-Frame .38/.357 8-Shot EDM (10) K95-12091 64.95N-Fr. .38/.357 8-rd. EDM Starline ONLY(10) K95-12092 64.95S&W N-Frame .38/.357 8-Shot (Blue) (10) K95-12093 39.95

TK Custom

Moon Clips

Why, It’s

“ThePerfectKnife!”GLOCK®

Field KnifeK95-15483$29.95

M-Pro 7’s Tactical 3 Gun CleaningKit contains: 2 Oz. Gun Cleaner; 2

Oz. Gun Oil; 1 ea. 5.56, 9/.40, 12 Ga.Bore-Snakes; a Nylon Utility Brush; aFoam Gun Pad; and a Weapon Mainte-nance Guide. K95-16182 $83.95

Secure Firearms Prod-ucts’ Universal

Spring Tester (left) willhelp you determine ifthe recoil spring in yourpistol needs replacing,and you’ll save timeand money by testingand organizing looserecoil springs in yourshooting bag.

Recoil Spring TesterK95-15305 $33.99


TheERGO

Grip DeltaGrip™ is the firsttruly ergonomic gripfor J Frame revolvers. De-signed for the most importantpart of the gun, the shooter, the DeltaGrip was engineered to fit the natural point ofaim and mechanics of the human hand, wrist and arm.The result is a grip with a superior natural point of aim,comfort and control. Fits round butt J-Frames. Will not fiton Smith and Wesson Bodyguard 38 Model (sku 103037and 103038). K95-19684 $19.95

65

Berry’s Bullets Special Purchase

.452 Dia. 230 Gr. Hybrid Hollow PointK95-19685 $67.50/500 ea.


66

M-PRO7™ Gun Clean-er is odorless, non-

toxic and biodegradable.“Safely cleans rifles, hand-guns, shotguns…, blackpowder, corrosive primingdeposits and much more.”4 oz. K95-10139 $11.958 oz. K95-10138 18.9532 oz. K95-11298 40.95M-PRO7™ CopperRemover works up to fourtimes faster than ammo-nia-based cleaners and isodor free.4 oz. K95-19370 $11.95M-PRO7™ SyntheticGrease is specifically for-mulated to adhere, protect, andlubricate metal-on-metal sliding sur-faces.4 oz. K95-16180 $14.95

Microlon UltraBlue protects, penetratesand lubricates all surfaces. UltraBlue is

in use by the US Army Marksmanship Train-ing Unit, the US Army Pistol and Rifle Teamsand the US Marine Corps Pistol and RifleTeams. K95-75125 $9.95

Sweet’s Australian7.62 Solvent eas-

ily removes powderresidue and stub-born copperfouling. It’sharmless tosteel, a non-acid formulawith five percentammonia. If youshoot a rifle, youought to trycleaning it withSweet’s.K95-13128$12.95

Snake Oil is a deriva-tive of an FDA certi-

fied medical lubricantused in high-speed med-ical drills. •Provides a film thatseparates and protectsmoving parts, forsmoother operation andincreased efficiency.•Contains no evaporantsand has a film affinity inexcess of two years.•Reduces the collectionof dirt, dust and othercontaminants.•Performance in extreme conditionsis unparalleled.0.5 oz. Bottle K95-16035 $4.952 oz. Bottle K95-16508 8.95Grease, (2) 4cc Tubes K95-17073 4.950.5 oz. Oil, 4cc Grease K95-10059 5.95

J. Dewey Mfg. Co.Cleaning Patches

Bore Snake, the “World’s Fastest GunBore Cleaner”™ from Michaels of

Oregon is a better way to clean hand-guns, rifles and shotguns. Originally soldas a field tool, this product is popularwith gunsmiths and benchrest shootersas well. Try one and you’ll be hooked!.22 cal. Pistol K95-10426 $22.95.357/.38/9mm K95-10427 22.95.40 cal. Pistol K95-10428 22.95.44/.45 cal. Pistol K95-10429 22.95.22 cal. Rifle K95-10420 22.95.243 cal. Rifle K95-10421 22.95.270/7mm Rifle K95-10422 22.95.30 cal. Rifle K95-10423 22.95.357/.375 cal. Rifle K95-10424 22.95.410/.458 K95-10425 22.95.50/.54/28 Ga. K95-10432 22.9520 Ga. Shotgun K95-10431 23.9512 Ga. Shotgun K95-10430 23.9537/40mm Launcher K95-15465 46.95

Product is color-coded bycaliber. White shown herefor clarity only.

Packages of 1000.17 cal. (3/4” Sq.) K95-11807 $12.95.22-.24 (1-3/8” Sq.) K95-11808 14.95Packages of 500.24-.27 (1-3/4” Sq.) K95-11809 $11.95.30-.35 (2” Sq.) K95-11810 13.95Packages of 250.38-.45 (2-3/4” Sq.) K95-11811 $11.9512-16 ga. (3” Sq.) K95-11812 13.95

TW-25B is the choice of leadingfirearms manufacturers, armorers, pro

shooters and gun enthusiasts, and is rec-ognized as the world’s best all-purposeweapons lubricant/protectant. It is nowwidely specified by the U.S. military fortheir most critical performance weaponssystems. Environmentally safe, non-car-cinogenic, non-ozone-depleting. 0.5 Oz. Syringe K95-15732 $10.991.5 Ounces K95-15731 14.50

MIL-COMMExtreme Performance Lubricants

E-Z BriteWonder ClothOn gun dealers

shelves since1976, this product isstill a must for keep-ing stainless steeland nickel-finished revolvers look-ing like new. Demand the originallead and carbon wipe! E-Z Brite Cloth K95-18613 $6.99

KEEPYOURGUNS! (Clean)

Brian Enos’ Far Superior Slide-Glide is adual grease blend, with proprietary

extreme pressure compounds, which boostthe ability of the oils in the grease to with-stand extreme pressures. It gives the grease avery stringy, tenacious character that makesit stay where you put it.

Slide-Glide Standard is for use in warmweather (F60º+), Lite is a thinner viscosityfor lower temperatures (F30º+).Slide-Glide Standard K95-15571 $7.95Slide-Glide Lite K95-15572 7.95

FrogLube is a bio-basedcleaner, lubricant and

preservative (CLP) prod-uct. FrogLube Solvents aredesigned to quickly attacksurface fouling, baked-onor filmed residues andother metallic foulingsuch as lead and copper,while protecting firearmscoatings, paints, woodand other materials fromthe corrosive effects ofpetroleum-based, flam-mable and toxic weaponscare products.

4 Oz. PasteK95-15443 $10.99

4 Oz. LiquidK95-15444 $17.59

No s#!+, there I was…in my office,cleaning my 686 SSR when the

boss walks in with that “whisky-tango-foxtrot” look on his face. “Hi,” I said(thinking fast), “I’m trying out theseBore-tips before I write the Blue Presscopy for them. They work GREAT!”

The Bore-tips Swabs REALLY DOwork. What you can’t see under thefoam is a plastic jag sized for a tight borefit which provides for the uniform appli-

cation of solvents and oils. They workwith all standard 8-32 thread cleaningrods, and are tough and reuseable..22/5.56mm (6 ea.) K95-15310 $4.98.243/6mm (6 ea.) K95-15311 4.98.30/7.62mm (6 ea.) K95-15312 4.98.357/9mm (6 ea.) K95-15313 4.98.40/10mm (5 ea.) K95-15314 4.98.45 Caliber (5 ea.) K95-15315 4.9812 Gauge (3 ea.) K95-15325 8.9820 Gauge (3 ea.) K95-15326 8.98

DEWEY Nylon Coated Cleaning RodsAll Caliber Pistol 6" K95-15461 $19.95(.22-.26 Jag Adapter for All Caliber 6" rod)K95-19894 3.25(.27 & up Adapter for All Caliber 6" rod) K95-19895 3.25.22-.26 Caliber Pistol 12" K95-12985 21.45.17 Caliber Rifle 26” K95-11472 22.95.17 Caliber Rifle 36” K95-11473 25.95.22-.26 Caliber Rifle 36" K95-13084 23.45.22-.26 Caliber Rifle 44" K95-15462 23.45.27 Caliber and up Pistol 12" K95-13021 21.45.27 Caliber and up Rifle 36" K95-12991 23.45.27 Caliber and up Rifle 44" K95-15463 23.45.35 Caliber and up Rifle 36" K95-17096 29.95.35 Caliber and up Rifle 44" K95-17097 29.95Shotgun Rod (Uncoated Brass) K95-10473 19.952-pc Shotgun Rod K95-15464 29.95Brass Jags (Note: These jags ONLy fit Dewey Cleaning Rods!).22 Caliber Brass Jag K95-10026 $2.75.24 Caliber Brass Jag K95-10027 2.75.27 Caliber Brass Jag K95-10025 2.75.30 Caliber (and up) Brass Jag K95-10867 2.75.38 – .41 Cal. Brass Jag K95-10028 2.75.44 – .45 Cal. Brass Jag K95-10243 2.75Brass Patch LoopAccepts most pistol and rifle patches K95-10737 $2.25.17 Caliber Bore Brushes.17 Caliber Rifle/Nylon (ea.) K95-11475 $1.95.17 Caliber Rifle/Bronze (ea.) K95-11474 1.95Nylon Bore Brushes .22 Caliber Rifle (ea.) K95-16144 $1.30.243 Caliber Rifle (ea.) K95-16145 1.30.270 Caliber Rifle (ea.) K95-16146 1.30.30 Caliber Rifle (ea.) K95-16147 1.30.22 Caliber Pistol (ea.) K95-16302 1.30.38 Caliber Pistol (ea.) K95-16148 1.30.40 Caliber Pistol (ea.) K95-16149 1.30.45 Caliber Pistol (ea.) K95-16150 1.30Bronze Bore Brushes Each/$1.50 5 pack/$5.50 .22 Caliber Rifle K95-16278 K95-22089.25 Caliber Rifle K95-16293 K95-22094

.243 Caliber Rifle K95-16280 K95-22091

.270 Caliber Rifle K95-16274 K95-22085

.30 Caliber–7.62mm Rifle K95-16273 K95-22084

.35 Caliber Rifle K95-16281 K95-22092

.44–.45 Caliber Rifle K95-16279 K95-22090

.22 Caliber Pistol K95-16282 K95-22093

.38 Caliber –9mm Pistol K95-16275 K95-22086

.40–.41 Caliber –10mm Pistol K95-16276 K95-22087

.44–.45 Caliber Pistol K95-16277 K95-22088Cotton Mops .22–.27 Caliber (ea.) K95-17089 $1.45.30–.38 Caliber (ea.) K95-17090 1.45.400–.450 Caliber (ea.) K95-17091 1.4516, 12 & 10 Ga. Shotgun (ea.) K95-17094 1.60M-16/AR-15 Breech Rod Guide/Chamber Brush Breech Rod Guide K95-10149 $20.00AR-15 Chamber Cleaning Brush K95-11299 2.95Deluxe M-16/AR-15 Lug Recess Cleaning Kit Lug Recess Cleaning Kit K95-18533 $27.95

Includes: Chamber Cleaning Rod, Lug Recess Cleaning Head, Delrin Guide Sleeve, 50-pak Cotton Cleaning Rolls, Chamber Brush, Chamber Mop, Double-Ended

Nylon Cleaning Brush.Bolt Action Rifle Cleaning Rod GuidesAll models fit .695-.700 bolt diameter rifles..17-.222, .225, .22/250, .220 Swift K95-14196 $18.95.243 Caliber – 7mm K95-14197 18.95.30 Caliber K95-14198 18.95.338 Caliber K95-14199 18.95Muzzle Guards AR-15/M-16 K95-16875 $9.95M1-A/M-14 K95-16876 9.95M1 Garand K95-16878 9.95Ruger 10-22 Standard Bbl. K95-16877 9.95Ruger 10-22 Bull Barrel K95-16879 9.95Ruger Mini-14 K95-16880 9.95Brass Muzzle Guard, .30 Cal. K95-17245 9.95Nylon Gun Parts Cleaning BrushParts cleaning brush K95-16389 $2.25

Dewey’s AR-Link Cleaning Pinutilizes the rear take-down

pin in your AR-15 style rifle tohold the upper and lower receiversopen for cleaning. It fits AR-15sand AR-10s with take-down pinsup to .316” in diameter. To use, 1)Depress the rear take-down pin and pull out. 2) Pivot the upperand lower receivers apart. 3) Insert the pin on the AR-Link into theupper receiver take-down pin tab. 4) Close receivers with the AR-Link inserted into the lower receiver. 5) Push the take-down pinthrough the channel in the AR-Link to lock the upper and lowerreceivers into place. 6) Clean your rifle. 7) To remove AR-Link,reverse the above steps. K95-18599 $14.95

™

The drymate™ Gun Cleaning Pad protectsyour table and firearms from scratches

and spilled cleaning fluids. Machine wash-able, durable, stain resistant and long lasting.

Gun Cleaning Pad™ K95-11313 $19.95

drymate

67


Bore-tips® Bore Cleaning Foam Swabs

J. Dewey Manufacturing Company

Wilson Combat’s NEW Elite Tactical Magazine HD +P – “TheETM Heavy Duty/+P rated.45 ACP magazines with exclusive

stainless flatwire MAX magazine spring and time-tested ETM tube.”A. (8 rd) .45ACP K95-18602 $44.95Elite Tactical Magazine – “The ETM started with a blank sheet ofpaper and 30-plus years of 1911 and 1911-magazine experience;designed from the ground up as a premium tactical magazine.”B. ETM (8 rd) .45ACP K95-12027 $34.95C. ETM (10 rd) 9mm K95-19463 $34.95Wilson Combat Magazines – “No other .45 magazine on the marketcan compare for proven inherent reliability, durability and the abilityto remain fully loaded for long periods of time without damage.”

D. Match Magazine (7 rd) .45ACP K95-10505 $32.95E. WIL-ROG Mag (8 rd) .45ACP K95-11714 32.95F. Officers Match Mag. (7 rd) .45ACP K95-10506 32.95SHOK-BUFF® Recoil System – Includes a One Piece Guide Rod andPlug; six SHOK-BUFF buffers; an Extra Power Firing Pin Spring; anExtra Power Recoil Spring; and a Reduced Power Recoil Spring. G. SHOK-BUFF System K95-18150 $37.05Wilson SHOK-BUFF® – A 1/10” thick poly fiber buffer between theframe and slide contact areas. H. SHOK-BUFF Kit (2 buffers, 18.5# recoil spring) Gov’t Model K95-18148 $5.95I. SHOK-BUFF Buffer only (6 ea.) K95-18147 $6.95

Chip McCormick Corp’s“Shooting Star”

MagazinesDesigned to give the serious pis-tol shooter the advantage of extrashot capacity and improved per-formance. Floorplate drilled toaccept base pads..45 ACP SS Mag., 8-Rd.

K95-10311 $19.95.45 ACP SS Mag., 10-Rd.

K95-15025 $25.95

Wolff RECOIL SPRINgSBROWNINg HI-POWER18.5 Pound K95-11373 $7.25COLT gOvERNMENT MODEL 9 Pound K95-11719 $7.2510 Pound K95-12193 7.2512 Pound K95-12007 7.2513 Pound K95-12443 7.2514 Pound K95-12338 7.2516 Pound (Standard) K95-11860 7.2517 Pound K95-12192 7.2518.5 Pound K95-12465 7.2520 Pound K95-12056 7.2523 Pound K95-11377 7.25COLT OFFICERS MODEL 24 Pound K95-12110 $7.25

Cz 75B 9 Pound K95-19348 $7.9810 Pound K95-19349 7.9811 Pound K95-19350 7.9812 Pound K95-19351 7.9813 Pound K95-19352 7.9814 Pound (Standard) K95-19353 7.98SMITH & WESSON M&P 12 Pound K95-19356 $7.9814 Pound K95-19357 7.9815 Pound K95-19358 7.9816 Pound (Standard) K95-19359 7.98SPRINgFIELD 5” 9/40 xD12 Pound K95-19339 $7.9813 Pound K95-19340 7.9814 Pound K95-19341 7.9815 Pound K95-19342 7.98

16 Pound K95-19343 7.9817 Pound (Standard) K95-19344 7.98SPRINgFIELD 5” 45 xD14 Pound K95-19345 $7.9816 Pound K95-19346 7.9818 Pound K95-19347 7.98SPRINgFIELD 4.5” 9/40 xDM14 Pound K95-19336 $7.9816 Pound K95-19337 7.9818 Pound (Standard) K95-19338 7.98Wolff gUIDE RODSSmith & Wesson M&P K95-19354 $24.95Springfield XDM 4.5 K95-19355 24.95Wolff HAMMER SPRINgS1911 K95-11511 $9.00Wolff MAg CATCH SPRINgS1911 K95-11791 $9.95

SPRINGFIELD MagazinesSpringfield Factory xD & xDM Magazines16-Rd. xD 9mm K95-11586 $31.9512-Rd. xD .40 K95-11587 31.9513-Rd. xD/xDM .45 K95-11585 32.9519-Rd. xDM 9mm K95-15496 36.957-Rd. xD-S 9mm K95-19681 28.959-Rd. xD-S 9mm K95-19680 39.9516-Rd. xDM .40 K95-19971 36.955-Rd. xD-S .45 K95-15234 28.957-Rd. xD-S .45 K95-15235 39.95Two-Piece 1911 Recoil Spring guide Rod –Machined from stainless steel, includes plugand Allen wrench. K95-15724 $24.95

WOLFF GUNSPRINGS


68

A. B. C. D. E. F.

G.

H.

I.

Wilson CombatWilson Combat

This Adjustable Target Pistol Sight is precision machined and fitsin a standard “Bomar slide cut.” Yeah, the services of a gun-

smith are required to cut the slide (unless your 1911 pistol alreadyhas a Bomar cut) but the results are worth it.Adjustable Pistol Sight K95-18210 $53.95

9mm 9-Rd. K95-27043$24.95

.38 Super 10-Rd. K95-27044$24.95

.40 S&W 9-Rd. K95-27046$24.95

10mm 9-Rd. K95-27045$24.95

.45 8-Rd. w/2 pads K95-27047$24.95

Base Padw/ScrewsK95-18045$2.50

.45 10-Rd.K95-27039$31.95

.45 8-Rd. Comp.K95-27049$24.95

Adjustable Target Sight for 1911s

CHECK-MATE 1911 Magazines

These two-piece flat checkered main-spring housings with bolt-on mag

wells are similar to the patented one-piece S&A design. The mag well andcheckered mainspring housing aremachined from solid bar stock steel andcan be used without the mag wellattached, although there will be a smalldovetail below (this does not impairfunction). This is a great replacement forplastic mainspring housings on full-sizeor commander model 1911s. Stainless K95-18600 $49.99

Blued K95-18601 49.99

Evolution Gun Works

69


California Competition Works’ Magazine Storage Sleeves makeit easy to organize your pistol magazines. The optional I.D.

Tag/Hanger makes it less likely that you’ll show up at a match withthe WRONG magazines! Four-Magazine Storage Sleeve K95-19226 $14.95Six-Magazine Storage Sleeve K95-19227 17.95Magazine Sleeve I.D. Tag/Hanger K95-19476 1.95

RobustSport &

Protection Sight,Volkmann 1911 forNovak Cut.K95-15385 $72.95

MAGPUL 1911 GripPanels feature rein-

forced polymer construc-tion and a uniquediamond-shaped cross sec-tion to prevent twisting inthe hand. They also havean aggressive mag-releasecut out and are compatiblewith ambidextrous safeties.FDE K95-43237 $19.95BLK K95-43236 19.95ODG K95-43238 19.95

Henning BATTLEHOOK

CHECK-MATE M14/M1A MagazinesCurrently Check-Mate Industries is the largest

M14/M1A magazine manufacturer for theUnited States Military. Check-Mate Industries is rec-ognized as being America’s number one manufac-turer of M14 magazines. We offer CMI M14/M1Amagazines in 5-, 20- and 25-round capacity. 5-round M14, Phosphate Finish

K95-27055 $22.0020-round M14, Polished-Stainless Finish

K95-27056 $28.0020-round M14, Phosphate Finish (NSN#: 1005-00-628-9048 Gov’t: 7790183)

K95-27057 $27.0025-round M14, Phosphate Finish (The same Mil-Spec magazines Check-Mate is now supplying tothe US Military.)

K95-27048 $35.95

Beretta 92 18-rd. AFC* K95-18728 $25.95Beretta 92 20-rd. AFC* K95-18729 29.95Beretta 96 .40 15-rd. AFC* K95-14992 29.95Browning HP 15-rd. Blue K95-18730 25.95Browning HP 20-rd. Blue K95-18731 29.951911 11-rd. Blue K95-18732 24.95Para P-14 14-rd. Blue K95-18733 23.95Para P-16 15-rd. Blue K95-18734 23.95Para P-18 17-rd. Blue K95-18735 23.95Ruger P-Series 9mm 17-rd. Blue K95-18736 25.95Ruger P-Series 9mm 20-rd. Blue K95-18737 29.95S&W 59 17-rd. Blue K95-18738 25.95S&W 59 20-rd. Blue K95-18739 29.95SIG Sauer 226 18-rd. AFC* K95-18740 25.95SIG Sauer 226 .40 15-rd. AFC* K95-15020 29.95SIG Sauer 228 15-rd. Blue K95-18741 25.95Springfield XD (not XDM) 9mm 18-rd. K95-14988 23.99Springfield XD (not XDM) .40 13-rd. AFC* K95-14991 29.95Taurus 92-99 17-rd. Blue K95-18742 25.95Taurus 92-99 20-rd. Blue K95-18743 29.95CZ-75B 19-rd. AFC* K95-14989 29.95*AFC = Anti-Friction Coating

These magazines are American made and feature a life-time manufacturers-defect warranty from ProMag.

Polymer 32-rd. 9mm AR-15 K95-12638 $19.95Polymer 30-rd. Mini-14 K95-12631 19.95Polymer 30-rd. AK-47 (7.62) K95-12669 17.95Polymer 30-rd. AK (.223) K95-12674 17.95Polymer 30-rd. AK-74 (5.45) K95-12675 17.95Kel-Tec P-32 Pistol (.32 ACP) K95-12620 19.95

Mec-GarPistol Magazines

70

New steel 30-round AK-47magazine from Bulgaria.

K95-12022 $24.95

ProMagProMag

C-Products 30-Round alu-minum M-16/AR-15 maga-

zine.K95-15593 $19.95

New steel 20-round AK-47magazine from South

Korea. K95-11074 $14.95


Ruger’s BX-25 magazine forthe 10-22.

K95-17915 $29.95

71ElZettaTactical Flashlight MountsEvery Elzetta ZFH1500 Flashlight Mount for AR15 rifles

and ZSM Tactical Shotgun Flashlight Mount comes withsizing adapters, giving the mount the ability to accommo-date flashlights from 0.7 to 1.05 inches (18 to 27 mm) indiameter. This includes flashlights from popular manufac-turers such as InForce®, Streamlight®, Pelican®, Laser De-vices®, SureFire® and of course, the Elzetta® ZFL-M60.(Sizing Adapters are not required when using an ElzettaZFL-M60 or other 1-inch lights.) The Elzetta ZSM is madefrom the same advanced glass-filled polymer that hasproven itself in the popular Elzetta ZFH1500.

The NEW Elzetta ZRX Tactical Flashlight Mount ismade for flashlights with standard one-inch bodies andwill accommodate a range from 0.94 to 1.04 inches (23.8to 26.4 mm). This includes many popular tactical flash-lights including the Elzetta ZFL-M60. The Elzetta ZRXclamping rings are made from Mil-Spec Type III Hard An-odized aluminum, the body is a glass-reinforced polymerand the hardware is steel. The ZRX weighs 1.1oz (32g).ZFH1500 AR15 Flashlight Mount K95-12020 $29.95ZSM Tactical Shotgun Mount K95-18050 39.95ZRX Tactical Flashlight Mount K95-15487 35.00

ZFH1500 Flashlight Mount for AR15s

ZSM Tactical ShotgunFlashlight Mount

ZRX Tactical Flashlight Mount

PROTEKTOR MODELThe Original Leather Sandbag* Rifle Rests

All Protektor Model leather bags aremade with the best top grain

cowhide available. The welded steelrest is strong enough to stand on andwon’t break if dropped (Owl Ear FrontBag sold separately). A. Front Bag K95-10880 $19.95B. Rifle Rest K95-10883 49.95C. Std. Front Bag K95-10881 22.95D. Rear Bag K95-10882 26.95

*Sand not included.

A.

B.C.

D.

The Dillon Shooting Mat

Dillon’s shooting mat is made of tough ballistic-weavenylon fabric, with a large skid-resistant elbow pad

area. The “ground” side is moisture resistant and wipesclean easily. The padding is dense, closed-cell foam toprovide both shooter comfort and a stable shootingbase. The mat is equipped with a shoulder strap, acarry handle and two straps with snap-release buck-les. Dimensions: 66” x 27.75”

K95-18146 $65.00

This three-piece shooting bag set is an incredible valuefor the money! The bags are made of durable, water-

resistant 600 denier polyester and provide a steady andsolid shooting system for long guns and handguns. Ifilled the ones in the photo with walnut tumbling mediaand found them to be easy to fill and much lighter tocarry than when filled with sand.

K95-15384 $29.95


TARGETTACTICALSPORTS®

72MAGPUL MAGLINK™

MAGPUL QD SLING SWIVEL

K95-43240$17.95

K95-43239$14.95

Magna-Matic’s Carbon Removal Tools quickly remove carbonfrom your rifle with ease and precision.

CRT-15 (AR15/M16) K95-11705 $49.95CRT-25 (AR10/SR25) K95-29025 49.95CRT-14 (M1A/M14) K95-29823 41.99

UTG Brass Catcherfor AR15s

Brass Catcher K95-15478 $9.99

Buffer Technologies’ Recoil Buffer™ re-duces felt recoil and increases muzzle

control. Easy installation. Beretta 92 K95-18539 $24.95

(Includes buffer and guide rod.)Browning HP K95-18540 9.95CETME K95-18541 19.95CZ 75 K95-18542 9.95FN FAL K95-18543 14.95GLOCK (pictured) K95-18545 9.95HK 91 K95-18544 19.95Ruger 10/22 K95-10526 9.95Ruger Mini-14 K95-10525 14.95SIG 220/226 K95-19123 24.95S&W Model 41 K95-18486 9.95

In “MIL-SPEC Speak,” this is a KIT,CLEANING, BUTT STOCK M16A2 RIFLE,

which contains: ROD, CLEANING, SMALL

ARMS: M11E3; CASE, SMALL ARMS ACCES-SORIES; BRUSH, CLEANING SMALL ARMS;BRUSH, CLEANING SMALL ARMS: BORE;BRUSH, CLEANING SMALL ARMS: CHAMBER;AND BOTTLE ASSEMBLY LSA 5 OZ. It justdoesn’t get much more MIL-SPECthan that.

K95-15383 $14.99

M-16/AR-15BUTTSTOCK CLEANING KIT

A. B.


TACCOM Five-Round Magazine Extensions for MagPul Gen 3PMAG 40-round 5.56 magazines and current M3 Generation

(20- and 25-round) 7.62 PMAGS are designed to fit and functionwithout modification. Previous-generation 20-round 7.62 maga-zines can be modified to work with the extension. The 5.56 exten-sion will also work with PMAG 30-, 20-, and 10-round magazines,but will not lock in place (instructions for use included). A. 5-Round 7.62 Extension K95-19542 $24.95B. 5-Round 5.56 Extension K95-19541 18.95

TACCOM, LLC Mag Extensions

The TTI Magazine Extension for MagPul AR-15 5.56 PMAGs isconstructed of machined aluminum.

K95-15770 $39.99

TARAN TACTICAL INNOVATIONS

The TTI Benelli Extended AccuGuide Carrier is the first extendedcarrier ever manufactured from one solid piece of SAE 304

Stainless Steel, which eliminates the need for welding. It is heat-treated and polished, providing optimal performance. The Carrierfeatures an extended guided rail on each side to assist in centeringthe round while reloading. It will provide you the speed and com-fort of not having your thumb torn up after reloading. Compatiblewith: Benelli M1/M2/M3/SBE, Versamax.

K95-15769 $79.99

MAGPUL 30-Round polymerPMAG GEN M2 M-16/AR-

15 magazines.K95-12644 $14.95

73

GRSC CQB Slings, Sling Mounts and Front SwivelsGRSC CQB Slings, Sling Mounts and Front Swivels

The GSRC CQB Sling was designed as a mission-specific sling forCQB operations. It attaches only at the rear of the firearm and al-

lows the operator to quickly transition to a handgun if necessary.

A. CQB Sling With Quick-Release Hook K95-19172 $39.95CQB Sling Without Hook (not pictured) K95-19173 $24.95B. CAR-15 Ambidextrous CQB Sling Mount with slots K95-18968 $14.95

CAR-15 Ambidextrous CQB Sling Mount without slots (picturedmounted on rifle above) K95-19170 $14.95C. A2-Style AR-15 CQB Right-Hand-Only Sling Mount K95-19168 $34.95D. Remington 870 Shotgun Ambidextrous CQB Sling Mount K95-19169 $24.95

A. B. C. D.

Viking Tactics Sling for CAR-15 K95-11961 $34.95Viking Tactics Sling for FN-FAL/HK-91 K95-11962 40.00

Viking Tactics’ V-TAC MK1 Sling is quick, instantlyadjustable to improve your shooting position, allows

shooting from weak-side shoulder, secures the carbine duringhandgun transitions, and allows hands-free movement in diffi-cult surroundings.

Viking Tactics V-TAC MK1 Sling

Developed from the experi-ence of the MagPul®

Team, the B.A.D. Lever™ isdesigned to improve the speedand efficiency of the AR-15/M-16 by enabling the shooter tomanipulate the bolt catch with-out moving away from theready position.

MagPul B.A.D. LeverK95-27058 $29.95

The MagPul® Enhanced Trig-ger Guard™ is a black

anodized aluminum drop-inreplacement for the AR15/M16weapons platform. It features ashallow "V" shape for better useof gloves in tactical shooting orcold weather operations. It’s non-folding and has rounded edges.

Aluminum Trigger GuardK95-12611 $19.95

MAGPUL UNFAIR ADVANTAGEEnhanced

Self-Leveling AR-15/M16

Mag Follower

Enhanced TriggerGuard, Aluminum

AR-15/M16

“Battery AssistDevice” for AR-15/M16

MAGPUL’s Enhanced Self Lev-eling Follower is a drop-in

replacement for USGI 30-roundmagazines. Features a four-wayanti-tilt design. 3-Pk. K95-12606 $6.95

™®


M-14 Bolt Roller Greaser

So THAT’s how you grease that littleS.O.B. (Slick-Operating Bolt, that is.)

M-14/M1A Bolt Roller GreaserK95-18531 $6.75

Dewey’s AR-Link Cleaning Pin utilizesthe rear take-down pin in your AR-15

style rifle to hold the upper and lowerreceivers open for cleaning. It fits AR-15sand AR-10s with take-down pins up to.316” in diameter.

K95-18599 $14.95 K95-19550 $19.99

AR-15 Charging Handle

The AccuWedge fits betweenthe upper and lower re-

ceiver on your AR-15, remov-ing excess movement. AccuWedge K95-19122 $4.95

The AR-15 Extractor Upgrade increasesthe tension on the extractor, pushing it

deeper into the cartridge extractor groove. K95-19121 $12.95

AccuWedge AR-15Extractor Upgrade

Jerry Miculek’s three-chamber AR-15Compensator fits threaded-barrel rifles

and may be “clocked” for left- or right-handed shooters. Used by many top three-gun competitors.

K95-11328 $49.95

Jerry MiculekAR-15 Compensator

The Badger Ordnance Tac Latch makes itmuch easier for you to operate the latch

on your AR-15/AR-10 charging handle. Itworks especially well for “flat-top” riflesequipped with low-mounted optics.

K95-10379 $18.95

Perma-Pin Firing Pin Retainer for M-16and AR-15 replaces the standard cotter

pin found in the bolt carrier to retain the fir-ing pin (as in original Stoner rifles). Made oftool steel. No modification to gun required.

K95-19927 $7.95

KNS Precision, Inc.

The Specialized Dynamics AR-15 Emer-gency Repair Kit includes: three gas

rings, extractor spring, firing pin retainingpin, buffer retaining pin/spring, hammer/trigger pin, take down detent and spring.

K95-19460 $19.95

Emergency AR(epair) KitCrucial Parts for Your AR-15 Tac Latch

TC-Accessories’ AR-15/M-16 Brass De-flectors are CMP/NRA approved for

service-rifle competition. Now you can pileyour spent brass at your feet instead of wast-ing time hunting it down.A. Standard AR-15 K95-12541 $19.95B. Flat-top K95-12542 19.95C. Removable Carry Handle K95-12543 19.95

AR15 Tritium/Fiber Optic Front SightK95-18626 $69.95

TRUGLOTactical Sights

74

ODIN Works EXTENDED MAG-AZINE RELEASE allows

you to rapidlychange magswithout disrupt-ing your shoot-ing position. TheXMR features anergonomic design that is four times largerthan factory magazine buttons and is con-toured for positive depression and reducedslip. Anodized in your choice of matte black(pictured), ODIN green, red or tan.Black XMR K95-11996 $19.95Green XMR K95-11998 19.95Red XMR K95-11997 19.95Tan XMR K95-11999 20.95

ODIN Works XMREXTENDED MAGAzINE RELEASE FOR AR-15S

A.

B.

C.

J. Dewey Manufacturing Company AR Gas TubesJ. Dewey Manufacturing Company AR Gas Tubes

J. Dewey AR Gas Tube, Short K95-15795 $9.95AR Gas Tube, Mid-Length K95-15796 11.95J. Dewey AR Gas Tube, Long K95-15800 9.95

Roller Cam Pin UpgradeIncludes Gas Key

K95-25363 $45.00

JPFC-1 .154 Small Pin Fire ControlKit w/CD-ROM Instructional VideoK95-12616 $119.95

Custom Stainless Bolt CarrierJPFBC-3 SP Low Mass,

Stainless FinishK95-12584 $225.95

JP AR Speed HammerJPSH-1A Low Mass HammerK95-12617 $59.95

Carbine Operating SpringJPS-OSC Carbine

K95-12594 $19.95

JP Custom Rifle Operating SpringJPS-OSR Rifle

K95-12587 $19.95

JP CompensatorJPTRE-2 1/2” x 28 TPIw/Exit Hole for .223Matte Black Finish

K95-12614 $89.95

JP Recoil EliminatorJPRE-2 1/2” x 28 TPI

Standard Version for AR15/M16Matte Black Finish

K95-12615 $99.95

JP AdjustableGas SystemJPGS-2FS

JP A2 Front Sightw/Gas ValveK95-12591$129.95

JP ReducedPower ARSpring SetK95-12618$10.95JP Enhanced

Reliability, ReducedPower ARSpring SetK95-12590$10.95

JPGS-2B w/QuickDetach RailK95-12592$89.95

JP Enterprises, Inc. Tactical Performance Gear

JP Enterprises (Competition Only) Low Mass BufferJPLMB

K95-12585 $59.95

JP Enterprises .223 JP EnhancedBolt™ Assembly JPEB-223 SAE3910 ConstructionK95-12586 $124.95

75

Trigger System, Incl. KNS PinsK95-19386 $199.99

Trigger System, Incl. KNS PinsK95-19387 $229.99

POF-USA AR-15/M-16 Parts

Enhanced Finger Placement

AR-15 Lower Parts KitK95-25364 $65.00

.308 Vortex Flash EliminatorK95-19683 $85.00

.223 Vortex Flash EliminatorK95-19682 $65.00

NEW!NEW!

Smith Enterprise, Inc. Vortex®Flash Eliminators

C-More Systems RTS Sight features a built in Picatinny/Weaver style rail mount.RTS 3.5 MOA, Black K95-14518 $419.00RTS 7 MOA, Black K95-14563 419.00C-More Systems STS Sight is the smallest C-More madeand many specialized mounting options are available.STS 3.5 MOA, Black K95-14345 $399.00STS 7 MOA, Black K95-14346 399.00STS Mount, Large Glock K95-14367 39.99STS Mount, Small Glock K95-14372 39.99STS Weaver/Picatinny Mount K95-14373 47.99STS 30mm Scope Tube Mount K95-14379 47.99STS 1” Scope Tube Mount K95-14474 47.99CR2032 Lithium STS/RTS Battery K95-14721 5.00C-More Systems Railway SightPolymer 8 MOA Black K95-16413 $249.00Aluminum 8 MOA Black K95-14611 299.00C-More Systems Tactical Railway Sight features a built-inspacer to co-witness with sights on flat-top AR-15s

Polymer 8 MOA Black K95-16511 $259.00Aluminum 4 MOA Black K95-14612 309.00C-More Systems Tactical Sight features an A-2 Style rearaperture sight and mounts to flat-top AR-15sAluminum 6 MOA Black K95-11444 $444.00Polymer 6 MOA Black K95-11605 399.95C-More Systems Colt Scout SightAluminum 4 MOA Black K95-16808 $368.00Replacement Modules for Railway/Scout/Tactical Sights2 MOA Dot Module, Polymer K95-14620 $49.002 MOA Dot Module, Aluminum K95-14643 49.004 MOA Dot Module, Polymer K95-16415 49.004 MOA Dot Module, Aluminum K95-14691 49.006 MOA Dot Module, Polymer K95-16416 49.006 MOA Dot Module, Aluminum K95-14696 49.008 MOA Dot Module, Polymer K95-14717 49.008 MOA Dot Module, Aluminum K95-14720 49.00Railway/Scout/Tactical Battery K95-17034 4.00

76

Railway Colt Scout SightTactical Sight

C-MORESYSTEMS


RTS

STS

AR-15 Super Tool K95-19549 $24.95

TARGET SPORTS® TACTICAL

SPECIALIZED DYNAMICS Armorers Upper Receiver Block

The Specialized Dynamics AR15/AR10 ArmorersUpper Receiver Block is made from billet aluminum

and holds your upper receiver securely in order to makeit easier to install barrels, free-float tubes, muzzle devices,

etc. One block fits AR15s and ArmaLite and DPMS plat-form AR10s. (Sorry, the upper receiver pictured above isNOT included.)

K95-43234 $59.99

Available in Standard Elevation or Plus-20 Minutes of AngleRemington Model 700 Short Action K95-19975Remington Model 700 Short Action + 20 MOA K95-19976Remington Model 700 Long Action K95-19977Remington Model 700 Long Action + 20 MOA K95-19978Savage Short Action RB K95-19979Savage Short Action RB + 20 MOA K95-19980

Savage Long Action RB K95-19981Savage Long Action RB + 20 MOA K95-19982Winchester Model 70 STD K95-19983Winchester Model 70 STD + 20 MOA K95-19984Winchester Model 70 Short Action K95-19985Winchester Model 70 Short Action + 20 MOA K95-19986

Evolution Gun Works Picatinny Rail Scope Mounts

Scout Scope Mounts provide an extremely stable optics base foryour AK, Saiga or SKS rifle and will not shift, vibrate loose or

change point of impact as the rifle heats up. Rock solid and easy toinstall, the two-piece design enables the removal and replacementof your optics without losing zero.

Scout Scope Mounts easily allow for complete DISASSEMBLY ofyour rifle for cleaning and maintenance while retaining zero. Theserifles are designed so that carbon build-up can easily be cleanedfrom the gas tube and piston. This is routine maintenance, necessaryin order to maintain a properly functioning rifle. Other mounts forAK-and SKS-style rifles make this difficult, time consuming and thenrequire that optics be re-zeroed.Scout Scope Mount for AK Rifle K95-25374 $79.99Scout Scope Mount for SKS Rifle K95-25373 78.99

Scout Scope Mounts for AK, SKS RiflesScout Scope Mounts for AK, SKS RiflesSorry, the optic

pictured here is NOTincluded with the

Scout Scope Mount.

$3999

77


Bushnell Trophy TRS-25 Ultra Compact Red Dot Sight

Atwist of the wrist is – quite literally – all it takes to switch fromyour long-range optic to a CQB red-dot sight with Tactical

Sports’ 45-degree Offset Auxillary Optics Mount! Fits most Picatin-ny rails. (Pictured with Bushnell’s TRS-25, which is NOT included!)

45° Offset Optic Mount K95-14472 $14.99

TacticalSports

45°-OffsetAuxillary

OpticsMount

Winchester’s TwistLeg Bi-Pod is

compact,light-weight,easily at-taches toyourrifle’sslingswivelstud, andfeatures twist lock legsfor unshakeable prone andbench shooting. Legs adjust from7.5” to 11.75” height. K95-19671 $29.95

Winchester Twist Leg Bi-Pod

Bushnell’s Trophy TRS-25 Ultra Compact Red Dot Sight is designed foruse on shotguns, handguns and rifles. It is constructed and assem-

bled by highly skilled craftsmen to Bushnell’s high quality standards. Theprecision and craftsmanship with which this scope was built ensures itsperformance under demanding conditions. This scope will provide theshooting accuracy and repeatability which have made Bushnell leg-endary. Features unlimited eye relief and a three-minute of angle dot.TRS-25 K95-11643 $89.95

78

By Brian Dervin Dillon, Ph.D.On May 2, 1946, San Francisco was enjoying

some very good spring weather. Instead of thefog rolling in as usual, that day it was bright andclear. The Golden Gate Bridge, one of the mostbeautiful sights in the country, was spectacular,and tourists, some of them servicemen still inuniform, were walking across it. Around 3:15P.M. pedestrians on the bridge heard whatsounded like gunfire. At the same time theSausalito Police in the town just north of thebridge began getting calls from nervous resi-dents. People reported gunshots, one after anoth-er. Once the cops rolled, they too heard the fir-ing but could not pinpoint where it was comingfrom. Before too long they realized the soundwas borne by a light wind: the gunshots werecoming from San Francisco Bay. Before too longword came that inmates at Alcatraz Federal Peni-tentiary had taken over one of their cellblocks.They had guns, were holding guards hostage,and had begun shooting. And now, the guardswere shooting back.

Alcatraz (Pelican) Island is the 20-acre tip of aseamount about a mile and half out into SanFrancisco Bay from that city’s shoreline. Itbecame a military installation soon after Califor-nia statehood in 1850. During the Civil War itserved as an arsenal, hosted a small permanentgarrison, and mounted over 80 cannon. A fewConfederate sympathizers were also jailed there.In 1868 its primary function changed from

artillery post to military prison, where the worstoffenders from Pacific Coast units were sent.Some American Indians also spent time there asprisoners. Alcatraz was the primary West Coastmilitary prison until October 1933, when itpassed into civilian hands. It became a FederalPenitentiary in August of 1934.

With the well-deserved reputation as the coun-try’s most secure prison, it was conceived of asAmerica’s own “Devil’s Island” where incorrigi-bles, the “worst of the worst” convicts culled fromall other federal prisons, would be sent. Escapewould be impossible, for not only would Alcatrazhave one of the highest guard-to-prisoner ratiosanywhere, but the island itself was surrounded byan effective natural barrier: the cold waters of SanFrancisco Bay. Prevailing currents would mostlikely sweep any swimming convict out throughthe Golden Gate and into the Pacific Ocean, ifthe sharks didn’t get him first. Prisoners werealways brought to Alcatraz by U.S. Marshals orFBI Agents, never by local police or sheriffs, andno publicity of any kind ever accompanied a pris-oner transfer. When word came of the hostage sit-uation at Alcatraz, all levels of law enforcementaround the Bay Area concluded that, being a Fed-eral problem, then the Feds themselves wouldhave to solve it. All off-duty Alcatraz prisonguards were ordered to report in, and every avail-able FBI Agent was to head towards the peniten-tiary by any means possible. One who did so wasmy Uncle Bill Dillon.

The Battle of Alcatraz, 1946

Figure 1: U.S. Marine Corps marksmen and Federal Prison Guards (lower left) fire rifle grenades at the barred win-dows of Alcatraz Federal Penitentiary Cell Block D (upper right). After inmates got firearms and took over part of theprison, FBI Agents, Prison Guards and U.S. Marines assaulted the cellblocks. The good guys eventually killed three ofthe bad guys, recaptured the cellblocks, and freed the surviving hostages. By the time the fighting was over, two

guards were dead, and nine wounded. Two of the surviving convicts were later sent to the gas chamber.San Francisco Chronicle Photograph

79

William Burke Dillon (1911-1989) was the old-est of four brothers. Born at the San Francisco Pre-sidio, he grew up across the Golden Gate at FortBaker, where his father was First Sergeant of the61st Coast Artillery Company, later the MustangCaptain in charge of the Presidio’s OrdnanceDepartment, and last of all the caretaker C.O. ofFort Baker when it went into mothballs after WWI.We have already met Grandpa Dillon in pastissues of The Blue Press (#253, 255 and 263) aswell as Bill Dillon’s brother Jack (#266 and 267).Like all the Dillon boys, Bill was an expert withrifle, shotgun and pistol and hunted from the ageof four or five.

In 1932, when he was 21, Uncle Bill became aSausalito Policeman. Dillon went to “wheelschool” and learned to ride a police Harley-Davidson. The most exciting moment of hisSausalito Cop career came while chasing a male-factor. Bill managed to run his motorcycle througha barbed-wire fence, both losing the suspect andearning himself a short stay in the hospital. Butmost of his time was spent writing parking tickets,his pistol always firmly in his holster, his Harleyup on its stand. The small town opposite San Fran-cisco was the choke point for thousands of dailycommuters by ferry, and traffic snarls were thebiggest and most constant police headaches.Young Bill’s war hero father urged him to get amore challenging job, so he attended college fulltime while still working weekends as a traffic cop.

Uncle Bill’s next step up the ladder came aftergetting his B.A. from the University of California.In 1934 he was sworn in as California State Police-man No. 18. The State Police was a little-knownelite force with very few officers. Begun in 1887 toprotect public servants in Sacramento, the StateCapitol, its jurisdiction later was also extended tothe State Supreme Court in San Francisco. Fordecades it was limited to just a dozen, plain-clothes, officers. By the 1920s California StatePolice jurisdiction was statewide, and its officerswere nicknamed “the Governor’s Bodyguard.”Their function was equivalent in many ways tothat of the Secret Service in Washington, D.C. In1929 a second, and much larger, state police forcewas created. The California Highway Patrol, orCHP, however, was staffed only by “traffic officers”with none of the intelligence or bodyguard func-tions of the much older State Police. In 1995, theoffspring consumed the parent; the State Police,after 108 years, was absorbed by the CHP.

Bill Dillon’s 1934 “beat” as a State Policemanwas the California Supreme Court. This was con-venient as he was now after a law degree at Hast-ings Law School, also in San Francisco. Halfwaythrough his coursework, during the summer of1935, he learned of a new law enforcementagency being formed on the East Coast. It wouldhave nationwide jurisdiction, and be called the

Federal Bureau of Investigation. Dillon decidedthat once done with law school, he would investi-gate this new agency. He was the Honors Gradu-ate of UC Hastings Law School, the oldest suchinstitution west of the Mississippi, in 1936, thenimmediately recruited into J. Edgar Hoover’s one-year-old FBI. Dillon had everything going for him:the highest educational qualifications, impeccablereferences, and experience in the most selectivelaw enforcement agency of his home state. Aftertraining at Quantico, Virginia, he was “doublysworn.” He was now an FBI agent, on the Federalpayroll, yet retained his State Police authority.

Dillon tracked down wanted fugitives on theWest Coast and delivered prisoners to Alcatraz.When the war came in 1941, he went undercoveras a counter-sabotage agent in aircraft plants fromSan Diego to Seattle. He looked for saboteurs andblack marketeers, making security recommenda-tions and checking out defense workers withquestionable identities. After VJ-Day, Dillonresumed his pre-war duties, rooting-out swindlersand interstate crooks for the Federal Government.He was in the San Francisco FBI office when thecall came in from Alcatraz around 3:30 P.M. onMay 2nd, 1946.

Two convicts had slugged a guard, gotten hiskeys away from him, and opened more cells. Thenan armed guard had been overpowered, and thecons now had a .30-06 rifle, a pistol and ammuni-tion. Eventually nine guards were made “prisonersof the prisoners” and dozens of cons werereleased from their cells. The inmates’ plan was touse their hostages as bargaining chips onto theprison boat making the daily round-trip to themainland. Once aboard, they would batten theirhostages below deck, cruise to a deserted stretchof shoreline, and lose themselves in the Bay Areatowns and cities. But the cons in their haste brokeoff a stolen key in the lock of the only door lead-ing down to the dock, and the boat left before theycould force their way onto it. When they realizedthey were still marooned, the cons gave in to frus-tration and began shooting at the guard towersoverlooking the exercise yard, hitting an unsus-pecting tower guard. Other guards raised a generalalarm, and returned fire. These were the shotsheard on the Bridge and in Sausalito. The consnow began shooting their hostages; killing one,wounding four more. Around 5:00 P.M. a largebody of armed guards tried to retake the cellblock;after four were wounded and one killed, theyretreated. No more “guards only” assaults wouldbe attempted.

Uncle Bill’s daily carry gun was a .38 revolver,of little use against barricaded convicts armedwith a high-powered rifle. Like all FBI originalagents of the 1930s, however, he was also quali-fied with 12-gauge shotgun, .30-06 BrowningAutomatic Rifle, and .45 ACP Thompson subma-

The Battle of Alcatraz, 1946

chine gun, the “Tommy Gun.” When he gotthe call, he signed out a BAR and magazinesfrom the armory, went down to the water-

front, and got the U.S. Coast Guard to run himover to Alcatraz. The Coast Guard then set up afloating perimeter around the island. Shortly afterAgent Dillon got there, a platoon of combat-readyU.S. Marines arrived, and he showed them whereto set up. The Marines had been no farther awaythan the next island over, on Treasure Island, com-plete with their own landing craft. This first Marinedetachment came to Alcatraz with small arms andgrenades, but night fell before much headwaycould be made against the inmates. Unbeknownstto the Feds, only six convicts wanted to continuefighting, the rest, withcold feet, had returnedto their cells.

Meanwhile, anaquatic media circushad surrounded theIsland. Newspaper andnewsreel reporterschartered anything thatwould float to coverwhat was already beingcalled “The Battle ofAlcatraz.” Civilianspectators with morecuriosity than sense rantheir boats in too closefor comfort as theshooting continued. At10:00 P.M. the SanFrancisco PoliceDepartment showed upwith some of theirpolice boats, one ofwhich Agent Dilloncommandeered “for theduration.” He estab-lished a firing positionfor his BAR on the frontdeck, then asked theother SFPD officers,most of whom heknew, to get the civil-ian craft out of the wayand herd them backacross the water to San Francisco. That first nighta few Marines got up atop the roof of the cell-block, cut holes in it, and dropped grenadesdown onto the barricaded convicts below.

The next morning the Marine assault, the firstsince the end of the Pacific War only eight monthsbefore, made banner headlines in every newspa-per, Coast to Coast. A second platoon from Treas-ure Island now joined the first, and the reinforcedbody of Marines pulled back and began shootingat the most likely cellblock windows behindwhich the armed convicts were thought to beholed up. The angles of view of the marksmen onAlcatraz Island were necessarily limited, so AgentDillon, familiar with the building interior from

years of escorting prisoners and interrogating con-victs, directed fire for the Marines from his floatinggun position, guiding their shots in; they simplyfollowed his own hits from his BAR. The Marinesquickly determined that the best way to soften upthe inmates was to fire rifle grenades at the barredwindows until their fragments could penetratethrough them. This was done for much of themorning of the second day, and on into its after-noon, interspersed with more rooftop handgrenade drops. Firing continued through the sec-ond night. On the morning of the third day, afteran hour-long barrage of rifle grenades, the cell-blocks were stormed by the Marines, with PrisonGuards and FBI agents as their guides. All of Alca-

traz was retaken beforenoon on May 4th. Thehead of Federal Prisonsflew in from Washing-ton, D.C. that same dayjust in time to surveythe wreckage.

Three of the convictringleaders had beenkilled, two of them pos-sibly within the first 24hours. No Marines orFBI agents were killedor wounded, but oneconvict and nine guardshad been hit in additionto the two killed by theinmates. FBI Agent Dil-lon now served as oneof nine board membersconducting the after-action investigation.Their findings were thatnegligence by twoguards had facilitatedthe escape attempt, andthat the Warden wasalso culpable. He wasreplaced. The three con-vict gunmen still aliveon May 4th were alltried for murder. Theyoungest was given asecond life term, and

finally released in 1973. The other two went to thegas chamber at San Quentin, where they wereexecuted, sitting side-by side, in 1948.

The “Battle of Alcatraz” soon captured theattention of novelists, songwriters, and Hollywoodhacks alike. Almost before the smoke had cleared,facts were discarded in favor of fiction. Now it wasclaimed that “every law enforcement agency” inCalifornia had been in on the attack, as had theU.S. Army and Navy, and that everything frommortars and bazookas to “heavy artillery” hadbeen fired at the convicts, whose numbers hadalso been impossibly inflated. The first movieloosely based on the event hit the screens withinonly one year. It was followed by many more, then

80

FBI Agent Dillon assaulted Alcatraz in 1946 from a SFPDpolice boat like this one, firing a Browning Automatic Rifleat the barricaded convicts from the prone position on thefront deck. Photo by J. B. Cook, former SFPD Chief of

Police, courtesy of the Bancroft Library, University of Cali-fornia, Berkeley.

by T.V. Dramas. One film was made by, andstarred, ex-jailbirds. Not surprisingly, within it theguards became the bad guys, the convicts theheroes. This movie inspired Jerry Leiber and MikeStoller to write Riot in Cell Block Number Nine,which became a 1954 Rock ‘n Roll hit. Threeyears later their Jailhouse Rock, sung by Elvis Pres-ley, really scored. By 1957 the “Battle of Alcatraz”had become completely unrecognizable in Ameri-can popular culture.

Meanwhile, FBI Agent Bill Dillon continued,quietly, with his law enforcement career. He wasmade the head of the Boise, Idaho, office at hisrequest, for this was his wife Eleanor’s hometown.Being the Boise Special Agent in Charge suitedUncle Bill just fine. A quiet backwater as far ascrime went, during his watch, no potatoes wereever smuggled into Idaho from Canada. Dillonretired from the FBI after 29 years, came back toCalifornia, and ran for Sheriff of Sonoma County.In 1966 he was part of the conservative backlashagainst the Hippie movement then just gettingstarted. He ran, of course, on a statewide law-and-

order ticket. Uncle Bill lost, but the top manon his slate, Ronald Reagan, was electedGovernor, his first major step towards thewhite house 14 years later. In 1984 Uncle Bill Dil-lon went back to Boise, saying that the Californiainmates were now running the asylum. By movinghe pioneered the mass-migration of retired Califor-nia Law Enforcement Officers to what most nowterm the “Free World,” the state with potatoes onits license plate. When he could be persuaded totalk about his 34 years as a local Cop, a StatePoliceman, and finally as an FBI Agent, Bill Dillonsimply characterized his participation as part ofthe endless struggle between right and wrong.

Alcatraz Island was decommissioned as aprison in 1963. It is now a National Park, on thetourist circuit. Most of the thousands of visitorswho cruise past it every year have seen two, threeor even four completely fictional movies about“the rock” but few if any, know the true story ofwhat happened there in early May of 1946. Manyyears ago Uncle Bill told me all about it, and gaveme the FBI holster he wore, way back then.

Modeled afterthe military .30

Caliber ammo can,this tough unit has agasket in the lid toprotect contentsfrom moisture. It’sapproximately 11”long x 7” high x 4”wide at its largest di-mensions and holds550 .223 rounds or1000 9mms. Madein the USA and comes with a lifetime warranty.

Pan Sifter & Ammo Can from Berry’s Manufacturing

An injection molded pan sifter that fits on top of abucket to separate your brass from cleaning media.

Berry’s Mfg. Pan Sifter K95-17519 $9.99 Berry’s Mfg. Clear Ammo Can K95-17518 $9.99

Otis Technology B.O.N.E. Tool and RIPCORDOtis Technology’s B.O.N.E.® Tool effectively cleans

the AR-15 bolt carrier assembly area including thebolt, bolt carrier and firing pin.

The RIPCORD™ is a rapid firearmcleaning system featuring Nomex®

fibers that act as both a brush to loosen and apatch to capture fouling particles.

Otis Technology B.O.N.E. Tool K95-18985 $24.99Otis Technology RIPCORD .223 K95-18965 14.99Otis Technology RIPCORD .308 K95-18981 14.99Otis Technology RIPCORD 9mm K95-18982 14.99Otis Technology RIPCORD .40 K95-18983 14.99Otis Technology RIPCORD .45 K95-18984 14.99

81

DP

Sun Devil Mfg. AR-15/10 ADIGS EGW AR-15 Forward Assist PlugSun Devil Manufac-

turing’s AdjustableDrop In Gas Systemfor AR-15 and AR-10rifles allows you toadjust your rifle’s gassystem for best per-formance.K95-19674 $59.95

Evolution GunWorks’ AR-15 For-

ward Assist Plug is foruse on competitionrifles that do not usethe forward assist. It’sanodized for longlife, matted to matchmost uppers.K95-18991 $9.99

Speer ReloadingManual, Rifle & Pistol (Number 14)– The ultimate load-ing guide for shoot-ers who are usingSpeer projectiles.K95-12580 $29.95

Reloading guides –These guides are com-piled from the mostrecent data availablefrom all the major pow-der and bullet manufac-turers.The convenientbinding allows the guideto lie open and flat onyour bench. $12.99 each. Revolver Guide K95-40010.45Colt/.454/.460/.475/.480/.500 K95-40060 Pistol Guide K95-40009 .223/.22-250 Guide K95-11762 .243/.270 Guide K95-40081 .308/.30-06 Guide K95-12209 .300 Win, Short, Ultra Mag K95-12210 7mm-08/7mm Rem, Ultra Mag K95-12211

The CompleteReloading Manualfor… Pretty much anythingyou’re likely to beloading! That’s right,all the data publishedby the various bulletand powder manufac-turers for YOURfavorite cartridge. $9.95 each

Handgun-Cartridge Manuals.32 H&R Magnum K95-15361.380 ACP K95-153629mm K95-15363.38 ACP K95-15365.38 Special K95-15364.357 Magnum K95-1536610mm/.40 S&W K95-15367.44 Special K95-15368.44 Magnum K95-15369.45 ACP K95-15370.45 Colt K95-15371Rifle-Cartridge Manuals.223 K95-15349.22-250 K95-15348.243 K95-15350.270 K95-153517mm-08 K95-153527mm Remington Magnum K95-153537.62 x 39 K95-15359.30 M1 K95-15354.30-30 K95-15355.308 K95-15356.30-06 K95-15357.300 Winchester Magnum K95-15358.45-70 K95-15360

Traveler’s guide to theFirearm Laws of the FiftyStates – The myriad offirearm laws facing thegun owner of the early21st Century can be intim-idating when traveling.

K95-30201 $9.95

Lyman’s AR Reloading Hand-book – Featuringloads for your ARchambered in popu-lar cartridges fromthe .204 Ruger tothe .50 Beowulf.K95-10976 $12.99

Lyman 49th Edition Reloading Hand-book – FeaturingMore Loads, theNewest Compo-nents, Most Manu-facturers, and MoreLoad Data than Ever!K95-10330 $24.95

Lyman’s Pistol andRevolver ReloadingHandbook (ThirdEdition) – TheWorld’s LeadingHandgun ReloadingManual.K95-18967 $21.95

Lyman Shotshell Re-loading Handbook,5th Edition – TheNumber One Shot-shell Loading Man-ual.K95-12846 $25.95

Practical Shooting: BeyondFundamentals – The keys toconsistent, high-speedshooting are within youright now. This book willshow you ways to bringthem out.

K95-10750 $19.95

gun-guides Complete guides for allmodels of Ruger .22 pistols, 10/22 riflesand Mini-14s; and dis-/reassembly guidesfor other popular firearms. The Complete guide $11.99 eachRuger .22 Pistols K95-40035Ruger 10/22 Rifle K95-40036Ruger Mini-14 K95-40037Dis-/Reassembly Only $6.99 each1911 Pistols K95-40045AK-47 K95-40038Browning Buckmark K95-40039Colt AR-15 K95-40040GLOCK Pistols K95-40041M1 Carbine K95-40042M1 Garand K95-40043Mauser Rifles K95-40044Mosin-Nagant Rifles K95-40046Mossberg 500 Shotguns K95-40047Remington 870 Shotguns K95-40048Remington 1100 Shotguns K95-40049Ruger Mk III Series .22 Pistols K95-40050Ruger Single-Action Revolvers K95-40051SKS Rifles K95-40052S&W M&P/Shield Pistols K95-432301903 Springfield Rifles K95-40061Springfield XD & XDM Pistols K95-40053Winchester 1300 Shotguns K95-40054

82


“Firestorm in the Desert (Machine Gun Magic)” – Dillon’s ownvideo portraying the history and excitement of the machine gunhobby. 60+ min.“Machine Gun Magic” DVD format K95-18312 $14.95“The Memphis Belle”/“The Fight for the Sky”Two-DVD Set K95-18320 $24.95

“Shooter Ready?” – Top quality instruction with all theexcitement of a major motion picture. 30 min.VHS format K95-13361 $15.95 “Shooter Ready?” DVD format K95-18313 $14.95“P51 Mustang”/“Corsair” Two-DVD Set K95-18321 $24.95

All Your Dillon-Video Favorites, NOW AVAILABLE On DVD!

SAVE $9.95 – Buy Both Air War DVD Sets K95-18319 $39.95

83


On-Target Productions, Ltd. videos aredesigned to educate enthusiasts about

the selection, proper use, cleaning, disas-sembly/reassembly, and accessorizing offirearms. On-Target Productions’ videos are100 percent digital quality, focused on thedetails and are entertaining and educational.Every video features clear, close-up photog-raphy to enhance the instructional narrativefrom start to finish.

“AK-47” 40090 $19.95 “AR-15” 40087 19.95 “AR-15 Maint. & Mods” 40099 24.99 “Scratch Building an AR-15” 40101 19.95“1911” 40086 19.95“GLOCK” 40083 19.95 “M1 Carbine” 40095 19.95 “M1 Garand” 40094 19.95 “Mossberg 500” 40092 19.95 “Remington 870” 40089 19.95

“Ruger Mk. 2” 40091 19.95 “Ruger Mk. 3” 40097 19.95 “Ruger 10/22” 40088 19.95 “Ruger Mini-14” 40096 19.95 “SKS” 40093 19.95“S&W M&P” 40084 19.95 “S&W Revolvers” 40100 19.95 “Sig Sauer P226” 40098 19.95 “Springfield Armory XD” 40085 19.95

All videos are DVD format.

Be prepared for any emergency with Wise Company’s 72 HourEmergency Entrée Kit. Each kit includes four servings per

day (total of 12 servings) of 20 ounce lunch and dinner entréesshown in the following schedule: Day 1: Two 10-ounce servings ofCheesy Lasagna and Beef cook-in-the-pouch entrée; and two 10-ounce servings of Pasta Alfredo with Chicken cook-in-the-pouch en-trée. Day 2: Two 10-ounce servings of Noodles and Beef in SavoryMushroom Sauce cook-in-the-pouch entrée; and two 10-ounceservings of Teriyaki Chickenand Rice cook-in-the-pouchentrée. Day 3: Two 10-ounceservings of Chili Macaroni withBeef cook-in-the-pouch entrée;and two 10-ounce servings ofCreamy Pasta and VegetableRotini with Chicken cook-in-the-pouch entrée.

Wise Company’s 60 Serving Gourmet Entrée Only “Graband Go” Food Kit includes two servings per day (entrées

only) for one adult for one month or four adults for one week. Prod-uct within this Bucketis: Savory Stroganoff (8servings), Chili Maca-roni (8 servings), PastaAlfredo (8 servings),Creamy Pasta and Veg-etable Rotini (8 serv-ings), Cheesy Lasagna(4 servings), Teriyakiand Rice (8 servings),Creamy Ala King andRice (8 servings), andCreamy Tomato BasilSoup (8 servings).

Wise Company’s 60 Serving Gourmet Freeze Dried Meat“Grab & Go” Food Kit includes 60 servings of assorted

gourmet-seasoned freeze dried meat and a 20-serving bonus oflong-term emergency rice, for a total of 80 servings. Productwithin this Bucketis: Roasted Chicken(12 servings), TeriyakiStyle Chicken (8 serv-ings), Cheesy Beef (8servings), SouthwestStyle Chicken (12 serv-ings), Savory RoastedGround Beef (12 serv-ings), Stroganoff StyleBeef (8 servings), andLong-Term Instant Rice(20 servings).

Wise Company’s 120 Serving Breakfast Only “Grab &Go” Food Kit includes 120 servings of breakfast assort-

ment (no en-trées). Productwithin thisBucketis: Apple Cin-namon Cereal(40 Servings),Crunchy Gra-nola (40 Serv-ings), andBrown Sugarand MapleMulti-Grain(40 Servings).

Wise Company’s 120 Serving Freeze Dried Vegetableand Sauce “Grab & Go” Food Kit includes 120 servings

of vegetable andsauce assortment.Product within thisBucket is: Corn (24servings), Peas (16servings), Broccoli (24servings), GreenBeans (24 servings),Butter Sauce (8 serv-ings), Cream Sauce (8servings), CheeseSauce (8 servings),and Mushroom Sauce(8 Servings).

Wise Company’s 120 Serving Freeze Dried Fruit andSnack “Grab & Go” Food Kit includes 120 servings of

fruit and snack assort-ment. Product withinthis Bucket is: Ba-nanas (16 servings),Strawberries (16 serv-ings), Peaches (16servings), Apples (16servings), CaramelSauce (16 servings),Yogurt (16 servings),and Pudding (16Servings).

$119.95K95-15297

$199.00K95-15303

$144.99K95-15300

$129.99K95-15299

$134.99K95-15302

$37.95K95-15296

Wise Company’s “Grab & Go” Emergency Food Kits

85


CED M2 ChronographK95-17926 $199.00

The M2 Chronograph comes with sensors, screens andone two-foot mounting bracket. A nylon carrying case

and tripod are available options. The CED7000 ShotTimer is a breakthrough in technology. No other timer todate offers this combination of advanced features, com-pact size and light weight. This is the “next generation”Shot Timer here today! Comes with a rechargeable batterywith low-battery LCD indicator and a universal charger.

COMPETITIVE EDGE DYNAMICS

M2 Chronograph Accessories Infrared Chronograph Upgrade Kit K95-12116 $89.00Rechargeable Batt. Pack for Above K95-12117 48.00Nylon Carrying Case K95-18145 35.95Tripod K95-18126 39.952-Ft. Skyscreen Mounting Bracket K95-18120 14.95Replacement Skyscreens K95-18124 21.95Replacement M2 Sensor K95-18877 36.95

CED7000 TimerK95-19208 $119.95

Nobody likes to think about it, but should a serioushunting/shooting accident occur, chances are the

drugstore “first aid kit” you have stashed under the seat ofyour truck won’t do much good. That’s why Cavalry ArmsMedical has produced trauma kits designed by ArmedForces medics.

The Cavalry Arms Medical P.T.K. (Personal Trauma Kit)contains a 15-gram package of Celox granules to controlserious bleeding, Nitrile gloves, a high-intensity Chem-Light, a six-inch Emergency Bandage with a second pad,and a 4.5-inch Kerlix Roll.

The A.T.K. (Advanced Trauma Kit) contains one 15-gram package of Celox granules, Nitrile gloves, a CPRFace Barrier, two VioNex Anti-Microbial Wipes, a high-intensity Chem-Light, two 4-inch Emergency Bandages,one 4.5-inch Kerlix Roll, two 2-inch Kerlix Rolls, one 3-inch Elastic Bandage, and two 5 x 9-inch sterile Abdomi-nal Pads. All contents of both kits are currently in use byreal-world combat medics.

Cavalry Arms Medical Trauma Kits

Personal Trauma Kit (P.T.K.) K95-19220 $29.95Advanced Trauma Kit (A.T.K.) K95-19322 69.95

Lyman Powder Pal

D-TERMINATORD-TERMINATORElectronic ScaleElectronic Scale

DILLON’S ‘ELIMINATOR’ SCALEDILLON’S ‘ELIMINATOR’ SCALE

• 900 grain/57 gram capacity• Accurate to 0.1 grain/0.01 gram• Uses four AA batteries (included)• Comes with its own AC adapter• Scale check weight included

(See Page 52 for additional scale check weight sets.) All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase.

$139.95K95-10483

$69.95K95-13480

Scale Cover K95-18387 $14.95(Note: Only fits current scale.)

Funnel Pan K95-18399 $5.95

86

87

101Classic

FirearmsK95-40133

$29.95 AutographedK95-97130

$34.95

2015Dillon Precision

Products CalendarK95-09992 $12.95

PRSRT STD

U.S

. Pos

tage

PAID

Dill

on P

reci

sion

DILLON PHONE NUMBERSOrders/Expert Assistance: 800-223-4570

For orders and technical assistance.Order Status/Basic Orders: 800-762-3845

Order by stock numbers only(no technical questions please);

or to quickly check the status of your order. Catalog Request: 800-762-3844To order The Blue Press catalog.

Dillon Showroom Hours: M-F, 9a-6p; Sat., 8a-3p

The BLU

E PRESS

Dill

on P

reci

sion

Pro

duct

s, In

c.80

09 E

. Dill

on’s

Way

Scot

tsda

le, A

Z 8

5260

-180

9

Scan

QR

Cod

e

Smith Enterprise, Inc.Vortex®

Flash EliminatorsSee Page 75

Sun Devil Mfg.ADIGS for AR-15s

CaliforniaCompetition

WorksMagwells

for GLOCKs See Page 59

See Page 65

See Page 81

ERGO Grip Delta Grip™

EGWAR-15

Forward Assist Plug

See Page 81

Documents

Dillon's Blue Press, Nov 2014